summaryrefslogtreecommitdiffstats
path: root/Documentation/power/regulator/overview.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/power/regulator/overview.txt')
-rw-r--r--Documentation/power/regulator/overview.txt6
1 files changed, 3 insertions, 3 deletions
diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt
index 8ed17587a74b..40ca2d6e2742 100644
--- a/Documentation/power/regulator/overview.txt
+++ b/Documentation/power/regulator/overview.txt
@@ -36,11 +36,11 @@ Some terms used in this document:-
Consumers can be classified into two types:-
Static: consumer does not change its supply voltage or
- current limit. It only needs to enable or disable it's
+ current limit. It only needs to enable or disable its
power supply. Its supply voltage is set by the hardware,
bootloader, firmware or kernel board initialisation code.
- Dynamic: consumer needs to change it's supply voltage or
+ Dynamic: consumer needs to change its supply voltage or
current limit to meet operation demands.
@@ -156,7 +156,7 @@ relevant to non SoC devices and is split into the following four interfaces:-
This interface is for machine specific code and allows the creation of
voltage/current domains (with constraints) for each regulator. It can
provide regulator constraints that will prevent device damage through
- overvoltage or over current caused by buggy client drivers. It also
+ overvoltage or overcurrent caused by buggy client drivers. It also
allows the creation of a regulator tree whereby some regulators are
supplied by others (similar to a clock tree).