summaryrefslogtreecommitdiffstats
path: root/Documentation/sound/oss/MultiSound
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/sound/oss/MultiSound')
-rw-r--r--Documentation/sound/oss/MultiSound1137
1 files changed, 0 insertions, 1137 deletions
diff --git a/Documentation/sound/oss/MultiSound b/Documentation/sound/oss/MultiSound
deleted file mode 100644
index e4a18bb7f73a..000000000000
--- a/Documentation/sound/oss/MultiSound
+++ /dev/null
@@ -1,1137 +0,0 @@
-#! /bin/sh
-#
-# Turtle Beach MultiSound Driver Notes
-# -- Andrew Veliath <andrewtv@usa.net>
-#
-# Last update: September 10, 1998
-# Corresponding msnd driver: 0.8.3
-#
-# ** This file is a README (top part) and shell archive (bottom part).
-# The corresponding archived utility sources can be unpacked by
-# running `sh MultiSound' (the utilities are only needed for the
-# Pinnacle and Fiji cards). **
-#
-#
-# -=-=- Getting Firmware -=-=-
-# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-#
-# See the section `Obtaining and Creating Firmware Files' in this
-# document for instructions on obtaining the necessary firmware
-# files.
-#
-#
-# Supported Features
-# ~~~~~~~~~~~~~~~~~~
-#
-# Currently, full-duplex digital audio (/dev/dsp only, /dev/audio is
-# not currently available) and mixer functionality (/dev/mixer) are
-# supported (memory mapped digital audio is not yet supported).
-# Digital transfers and monitoring can be done as well if you have
-# the digital daughterboard (see the section on using the S/PDIF port
-# for more information).
-#
-# Support for the Turtle Beach MultiSound Hurricane architecture is
-# composed of the following modules (these can also operate compiled
-# into the kernel):
-#
-# msnd - MultiSound base (requires soundcore)
-#
-# msnd_classic - Base audio/mixer support for Classic, Monetery and
-# Tahiti cards
-#
-# msnd_pinnacle - Base audio/mixer support for Pinnacle and Fiji cards
-#
-#
-# Important Notes - Read Before Using
-# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-#
-# The firmware files are not included (may change in future). You
-# must obtain these images from Turtle Beach (they are included in
-# the MultiSound Development Kits), and place them in /etc/sound for
-# example, and give the full paths in the Linux configuration. If
-# you are compiling in support for the MultiSound driver rather than
-# using it as a module, these firmware files must be accessible
-# during kernel compilation.
-#
-# Please note these files must be binary files, not assembler. See
-# the section later in this document for instructions to obtain these
-# files.
-#
-#
-# Configuring Card Resources
-# ~~~~~~~~~~~~~~~~~~~~~~~~~~
-#
-# ** This section is very important, as your card may not work at all
-# or your machine may crash if you do not do this correctly. **
-#
-# * Classic/Monterey/Tahiti
-#
-# These cards are configured through the driver msnd_classic. You must
-# know the io port, then the driver will select the irq and memory resources
-# on the card. It is up to you to know if these are free locations or now,
-# a conflict can lock the machine up.
-#
-# * Pinnacle/Fiji
-#
-# The Pinnacle and Fiji cards have an extra config port, either
-# 0x250, 0x260 or 0x270. This port can be disabled to have the card
-# configured strictly through PnP, however you lose the ability to
-# access the IDE controller and joystick devices on this card when
-# using PnP. The included pinnaclecfg program in this shell archive
-# can be used to configure the card in non-PnP mode, and in PnP mode
-# you can use isapnptools. These are described briefly here.
-#
-# pinnaclecfg is not required; you can use the msnd_pinnacle module
-# to fully configure the card as well. However, pinnaclecfg can be
-# used to change the resource values of a particular device after the
-# msnd_pinnacle module has been loaded. If you are compiling the
-# driver into the kernel, you must set these values during compile
-# time, however other peripheral resource values can be changed with
-# the pinnaclecfg program after the kernel is loaded.
-#
-#
-# *** PnP mode
-#
-# Use pnpdump to obtain a sample configuration if you can; I was able
-# to obtain one with the command `pnpdump 1 0x203' -- this may vary
-# for you (running pnpdump by itself did not work for me). Then,
-# edit this file and use isapnp to uncomment and set the card values.
-# Use these values when inserting the msnd_pinnacle module. Using
-# this method, you can set the resources for the DSP and the Kurzweil
-# synth (Pinnacle). Since Linux does not directly support PnP
-# devices, you may have difficulty when using the card in PnP mode
-# when it the driver is compiled into the kernel. Using non-PnP mode
-# is preferable in this case.
-#
-# Here is an example mypinnacle.conf for isapnp that sets the card to
-# io base 0x210, irq 5 and mem 0xd8000, and also sets the Kurzweil
-# synth to 0x330 and irq 9 (may need editing for your system):
-#
-# (READPORT 0x0203)
-# (CSN 2)
-# (IDENTIFY *)
-#
-# # DSP
-# (CONFIGURE BVJ0440/-1 (LD 0
-# (INT 0 (IRQ 5 (MODE +E))) (IO 0 (BASE 0x0210)) (MEM 0 (BASE 0x0d8000))
-# (ACT Y)))
-#
-# # Kurzweil Synth (Pinnacle Only)
-# (CONFIGURE BVJ0440/-1 (LD 1
-# (IO 0 (BASE 0x0330)) (INT 0 (IRQ 9 (MODE +E)))
-# (ACT Y)))
-#
-# (WAITFORKEY)
-#
-#
-# *** Non-PnP mode
-#
-# The second way is by running the card in non-PnP mode. This
-# actually has some advantages in that you can access some other
-# devices on the card, such as the joystick and IDE controller. To
-# configure the card, unpack this shell archive and build the
-# pinnaclecfg program. Using this program, you can assign the
-# resource values to the card's devices, or disable the devices. As
-# an alternative to using pinnaclecfg, you can specify many of the
-# configuration values when loading the msnd_pinnacle module (or
-# during kernel configuration when compiling the driver into the
-# kernel).
-#
-# If you specify cfg=0x250 for the msnd_pinnacle module, it
-# automatically configure the card to the given io, irq and memory
-# values using that config port (the config port is jumper selectable
-# on the card to 0x250, 0x260 or 0x270).
-#
-# See the `msnd_pinnacle Additional Options' section below for more
-# information on these parameters (also, if you compile the driver
-# directly into the kernel, these extra parameters can be useful
-# here).
-#
-#
-# ** It is very easy to cause problems in your machine if you choose a
-# resource value which is incorrect. **
-#
-#
-# Examples
-# ~~~~~~~~
-#
-# * MultiSound Classic/Monterey/Tahiti:
-#
-# modprobe soundcore
-# insmod msnd
-# insmod msnd_classic io=0x290 irq=7 mem=0xd0000
-#
-# * MultiSound Pinnacle in PnP mode:
-#
-# modprobe soundcore
-# insmod msnd
-# isapnp mypinnacle.conf
-# insmod msnd_pinnacle io=0x210 irq=5 mem=0xd8000 <-- match mypinnacle.conf values
-#
-# * MultiSound Pinnacle in non-PnP mode (replace 0x250 with your configuration port,
-# one of 0x250, 0x260 or 0x270):
-#
-# insmod soundcore
-# insmod msnd
-# insmod msnd_pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000
-#
-# * To use the MPU-compatible Kurzweil synth on the Pinnacle in PnP
-# mode, add the following (assumes you did `isapnp mypinnacle.conf'):
-#
-# insmod sound
-# insmod mpu401 io=0x330 irq=9 <-- match mypinnacle.conf values
-#
-# * To use the MPU-compatible Kurzweil synth on the Pinnacle in non-PnP
-# mode, add the following. Note how we first configure the peripheral's
-# resources, _then_ install a Linux driver for it:
-#
-# insmod sound
-# pinnaclecfg 0x250 mpu 0x330 9
-# insmod mpu401 io=0x330 irq=9
-#
-# -- OR you can use the following sequence without pinnaclecfg in non-PnP mode:
-#
-# insmod soundcore
-# insmod msnd
-# insmod msnd_pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 mpu_io=0x330 mpu_irq=9
-# insmod sound
-# insmod mpu401 io=0x330 irq=9
-#
-# * To setup the joystick port on the Pinnacle in non-PnP mode (though
-# you have to find the actual Linux joystick driver elsewhere), you
-# can use pinnaclecfg:
-#
-# pinnaclecfg 0x250 joystick 0x200
-#
-# -- OR you can configure this using msnd_pinnacle with the following:
-#
-# insmod soundcore
-# insmod msnd
-# insmod msnd_pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 joystick_io=0x200
-#
-#
-# msnd_classic, msnd_pinnacle Required Options
-# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-#
-# If the following options are not given, the module will not load.
-# Examine the kernel message log for informative error messages.
-# WARNING--probing isn't supported so try to make sure you have the
-# correct shared memory area, otherwise you may experience problems.
-#
-# io I/O base of DSP, e.g. io=0x210
-# irq IRQ number, e.g. irq=5
-# mem Shared memory area, e.g. mem=0xd8000
-#
-#
-# msnd_classic, msnd_pinnacle Additional Options
-# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-#
-# fifosize The digital audio FIFOs, in kilobytes. If not
-# specified, the default will be used. Increasing
-# this value will reduce the chance of a FIFO
-# underflow at the expense of increasing overall
-# latency. For example, fifosize=512 will
-# allocate 512kB read and write FIFOs (1MB total).
-# While this may reduce dropouts, a heavy machine
-# load will undoubtedly starve the FIFO of data
-# and you will eventually get dropouts. One
-# option is to alter the scheduling priority of
-# the playback process, using `nice' or some form
-# of POSIX soft real-time scheduling.
-#
-# calibrate_signal Setting this to one calibrates the ADCs to the
-# signal, zero calibrates to the card (defaults
-# to zero).
-#
-#
-# msnd_pinnacle Additional Options
-# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-#
-# digital Specify digital=1 to enable the S/PDIF input
-# if you have the digital daughterboard
-# adapter. This will enable access to the
-# DIGITAL1 input for the soundcard in the mixer.
-# Some mixer programs might have trouble setting
-# the DIGITAL1 source as an input. If you have
-# trouble, you can try the setdigital.c program
-# at the bottom of this document.
-#
-# cfg Non-PnP configuration port for the Pinnacle
-# and Fiji (typically 0x250, 0x260 or 0x270,
-# depending on the jumper configuration). If
-# this option is omitted, then it is assumed
-# that the card is in PnP mode, and that the
-# specified DSP resource values are already
-# configured with PnP (i.e. it won't attempt to
-# do any sort of configuration).
-#
-# When the Pinnacle is in non-PnP mode, you can use the following
-# options to configure particular devices. If a full specification
-# for a device is not given, then the device is not configured. Note
-# that you still must use a Linux driver for any of these devices
-# once their resources are setup (such as the Linux joystick driver,
-# or the MPU401 driver from OSS for the Kurzweil synth).
-#
-# mpu_io I/O port of MPU (on-board Kurzweil synth)
-# mpu_irq IRQ of MPU (on-board Kurzweil synth)
-# ide_io0 First I/O port of IDE controller
-# ide_io1 Second I/O port of IDE controller
-# ide_irq IRQ IDE controller
-# joystick_io I/O port of joystick
-#
-#
-# Obtaining and Creating Firmware Files
-# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-#
-# For the Classic/Tahiti/Monterey
-# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-#
-# Download to /tmp and unzip the following file from Turtle Beach:
-#
-# ftp://ftp.voyetra.com/pub/tbs/msndcl/msndvkit.zip
-#
-# When unzipped, unzip the file named MsndFiles.zip. Then copy the
-# following firmware files to /etc/sound (note the file renaming):
-#
-# cp DSPCODE/MSNDINIT.BIN /etc/sound/msndinit.bin
-# cp DSPCODE/MSNDPERM.REB /etc/sound/msndperm.bin
-#
-# When configuring the Linux kernel, specify /etc/sound/msndinit.bin and
-# /etc/sound/msndperm.bin for the two firmware files (Linux kernel
-# versions older than 2.2 do not ask for firmware paths, and are
-# hardcoded to /etc/sound).
-#
-# If you are compiling the driver into the kernel, these files must
-# be accessible during compilation, but will not be needed later.
-# The files must remain, however, if the driver is used as a module.
-#
-#
-# For the Pinnacle/Fiji
-# ~~~~~~~~~~~~~~~~~~~~~
-#
-# Download to /tmp and unzip the following file from Turtle Beach (be
-# sure to use the entire URL; some have had trouble navigating to the
-# URL):
-#
-# ftp://ftp.voyetra.com/pub/tbs/pinn/pnddk100.zip
-#
-# Unpack this shell archive, and run make in the created directory
-# (you need a C compiler and flex to build the utilities). This
-# should give you the executables conv, pinnaclecfg and setdigital.
-# conv is only used temporarily here to create the firmware files,
-# while pinnaclecfg is used to configure the Pinnacle or Fiji card in
-# non-PnP mode, and setdigital can be used to set the S/PDIF input on
-# the mixer (pinnaclecfg and setdigital should be copied to a
-# convenient place, possibly run during system initialization).
-#
-# To generating the firmware files with the `conv' program, we create
-# the binary firmware files by doing the following conversion
-# (assuming the archive unpacked into a directory named PINNDDK):
-#
-# ./conv < PINNDDK/dspcode/pndspini.asm > /etc/sound/pndspini.bin
-# ./conv < PINNDDK/dspcode/pndsperm.asm > /etc/sound/pndsperm.bin
-#
-# The conv (and conv.l) program is not needed after conversion and can
-# be safely deleted. Then, when configuring the Linux kernel, specify
-# /etc/sound/pndspini.bin and /etc/sound/pndsperm.bin for the two
-# firmware files (Linux kernel versions older than 2.2 do not ask for
-# firmware paths, and are hardcoded to /etc/sound).
-#
-# If you are compiling the driver into the kernel, these files must
-# be accessible during compilation, but will not be needed later.
-# The files must remain, however, if the driver is used as a module.
-#
-#
-# Using Digital I/O with the S/PDIF Port
-# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-#
-# If you have a Pinnacle or Fiji with the digital daughterboard and
-# want to set it as the input source, you can use this program if you
-# have trouble trying to do it with a mixer program (be sure to
-# insert the module with the digital=1 option, or say Y to the option
-# during compiled-in kernel operation). Upon selection of the S/PDIF
-# port, you should be able monitor and record from it.
-#
-# There is something to note about using the S/PDIF port. Digital
-# timing is taken from the digital signal, so if a signal is not
-# connected to the port and it is selected as recording input, you
-# will find PCM playback to be distorted in playback rate. Also,
-# attempting to record at a sampling rate other than the DAT rate may
-# be problematic (i.e. trying to record at 8000Hz when the DAT signal
-# is 44100Hz). If you have a problem with this, set the recording
-# input to analog if you need to record at a rate other than that of
-# the DAT rate.
-#
-#
-# -- Shell archive attached below, just run `sh MultiSound' to extract.
-# Contains Pinnacle/Fiji utilities to convert firmware, configure
-# in non-PnP mode, and select the DIGITAL1 input for the mixer.
-#
-#
-#!/bin/sh
-# This is a shell archive (produced by GNU sharutils 4.2).
-# To extract the files from this archive, save it to some FILE, remove
-# everything before the `!/bin/sh' line above, then type `sh FILE'.
-#
-# Made on 1998-12-04 10:07 EST by <andrewtv@ztransform.velsoft.com>.
-# Source directory was `/home/andrewtv/programming/pinnacle/pinnacle'.
-#
-# Existing files will *not* be overwritten unless `-c' is specified.
-#
-# This shar contains:
-# length mode name
-# ------ ---------- ------------------------------------------
-# 2046 -rw-rw-r-- MultiSound.d/setdigital.c
-# 10235 -rw-rw-r-- MultiSound.d/pinnaclecfg.c
-# 106 -rw-rw-r-- MultiSound.d/Makefile
-# 141 -rw-rw-r-- MultiSound.d/conv.l
-# 1472 -rw-rw-r-- MultiSound.d/msndreset.c
-#
-save_IFS="${IFS}"
-IFS="${IFS}:"
-gettext_dir=FAILED
-locale_dir=FAILED
-first_param="$1"
-for dir in $PATH
-do
- if test "$gettext_dir" = FAILED && test -f $dir/gettext \
- && ($dir/gettext --version >/dev/null 2>&1)
- then
- set `$dir/gettext --version 2>&1`
- if test "$3" = GNU
- then
- gettext_dir=$dir
- fi
- fi
- if test "$locale_dir" = FAILED && test -f $dir/shar \
- && ($dir/shar --print-text-domain-dir >/dev/null 2>&1)
- then
- locale_dir=`$dir/shar --print-text-domain-dir`
- fi
-done
-IFS="$save_IFS"
-if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILED
-then
- echo=echo
-else
- TEXTDOMAINDIR=$locale_dir
- export TEXTDOMAINDIR
- TEXTDOMAIN=sharutils
- export TEXTDOMAIN
- echo="$gettext_dir/gettext -s"
-fi
-touch -am 1231235999 $$.touch >/dev/null 2>&1
-if test ! -f 1231235999 && test -f $$.touch; then
- shar_touch=touch
-else
- shar_touch=:
- echo
- $echo 'WARNING: not restoring timestamps. Consider getting and'
- $echo "installing GNU \`touch', distributed in GNU File Utilities..."
- echo
-fi
-rm -f 1231235999 $$.touch
-#
-if mkdir _sh01426; then
- $echo 'x -' 'creating lock directory'
-else
- $echo 'failed to create lock directory'
- exit 1
-fi
-# ============= MultiSound.d/setdigital.c ==============
-if test ! -d 'MultiSound.d'; then
- $echo 'x -' 'creating directory' 'MultiSound.d'
- mkdir 'MultiSound.d'
-fi
-if test -f 'MultiSound.d/setdigital.c' && test "$first_param" != -c; then
- $echo 'x -' SKIPPING 'MultiSound.d/setdigital.c' '(file already exists)'
-else
- $echo 'x -' extracting 'MultiSound.d/setdigital.c' '(text)'
- sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/setdigital.c' &&
-/*********************************************************************
-X *
-X * setdigital.c - sets the DIGITAL1 input for a mixer
-X *
-X * Copyright (C) 1998 Andrew Veliath
-X *
-X * This program is free software; you can redistribute it and/or modify
-X * it under the terms of the GNU General Public License as published by
-X * the Free Software Foundation; either version 2 of the License, or
-X * (at your option) any later version.
-X *
-X * This program is distributed in the hope that it will be useful,
-X * but WITHOUT ANY WARRANTY; without even the implied warranty of
-X * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-X * GNU General Public License for more details.
-X *
-X * You should have received a copy of the GNU General Public License
-X * along with this program; if not, write to the Free Software
-X * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-X *
-X ********************************************************************/
-X
-#include <stdio.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/ioctl.h>
-#include <sys/soundcard.h>
-X
-int main(int argc, char *argv[])
-{
-X int fd;
-X unsigned long recmask, recsrc;
-X
-X if (argc != 2) {
-X fprintf(stderr, "usage: setdigital <mixer device>\n");
-X exit(1);
-X }
-X
-X if ((fd = open(argv[1], O_RDWR)) < 0) {
-X perror(argv[1]);
-X exit(1);
-X }
-X
-X if (ioctl(fd, SOUND_MIXER_READ_RECMASK, &recmask) < 0) {
-X fprintf(stderr, "error: ioctl read recording mask failed\n");
-X perror("ioctl");
-X close(fd);
-X exit(1);
-X }
-X
-X if (!(recmask & SOUND_MASK_DIGITAL1)) {
-X fprintf(stderr, "error: cannot find DIGITAL1 device in mixer\n");
-X close(fd);
-X exit(1);
-X }
-X
-X if (ioctl(fd, SOUND_MIXER_READ_RECSRC, &recsrc) < 0) {
-X fprintf(stderr, "error: ioctl read recording source failed\n");
-X perror("ioctl");
-X close(fd);
-X exit(1);
-X }
-X
-X recsrc |= SOUND_MASK_DIGITAL1;
-X
-X if (ioctl(fd, SOUND_MIXER_WRITE_RECSRC, &recsrc) < 0) {
-X fprintf(stderr, "error: ioctl write recording source failed\n");
-X perror("ioctl");
-X close(fd);
-X exit(1);
-X }
-X
-X close(fd);
-X
-X return 0;
-}
-SHAR_EOF
- $shar_touch -am 1204092598 'MultiSound.d/setdigital.c' &&
- chmod 0664 'MultiSound.d/setdigital.c' ||
- $echo 'restore of' 'MultiSound.d/setdigital.c' 'failed'
- if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
- && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
- md5sum -c << SHAR_EOF >/dev/null 2>&1 \
- || $echo 'MultiSound.d/setdigital.c:' 'MD5 check failed'
-e87217fc3e71288102ba41fd81f71ec4 MultiSound.d/setdigital.c
-SHAR_EOF
- else
- shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/setdigital.c'`"
- test 2046 -eq "$shar_count" ||
- $echo 'MultiSound.d/setdigital.c:' 'original size' '2046,' 'current size' "$shar_count!"
- fi
-fi
-# ============= MultiSound.d/pinnaclecfg.c ==============
-if test -f 'MultiSound.d/pinnaclecfg.c' && test "$first_param" != -c; then
- $echo 'x -' SKIPPING 'MultiSound.d/pinnaclecfg.c' '(file already exists)'
-else
- $echo 'x -' extracting 'MultiSound.d/pinnaclecfg.c' '(text)'
- sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/pinnaclecfg.c' &&
-/*********************************************************************
-X *
-X * pinnaclecfg.c - Pinnacle/Fiji Device Configuration Program
-X *
-X * This is for NON-PnP mode only. For PnP mode, use isapnptools.
-X *
-X * This is Linux-specific, and must be run with root permissions.
-X *
-X * Part of the Turtle Beach MultiSound Sound Card Driver for Linux
-X *
-X * Copyright (C) 1998 Andrew Veliath
-X *
-X * This program is free software; you can redistribute it and/or modify
-X * it under the terms of the GNU General Public License as published by
-X * the Free Software Foundation; either version 2 of the License, or
-X * (at your option) any later version.
-X *
-X * This program is distributed in the hope that it will be useful,
-X * but WITHOUT ANY WARRANTY; without even the implied warranty of
-X * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-X * GNU General Public License for more details.
-X *
-X * You should have received a copy of the GNU General Public License
-X * along with this program; if not, write to the Free Software
-X * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-X *
-X ********************************************************************/
-X
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-#include <unistd.h>
-#include <asm/io.h>
-#include <asm/types.h>
-X
-#define IREG_LOGDEVICE 0x07
-#define IREG_ACTIVATE 0x30
-#define LD_ACTIVATE 0x01
-#define LD_DISACTIVATE 0x00
-#define IREG_EECONTROL 0x3F
-#define IREG_MEMBASEHI 0x40
-#define IREG_MEMBASELO 0x41
-#define IREG_MEMCONTROL 0x42
-#define IREG_MEMRANGEHI 0x43
-#define IREG_MEMRANGELO 0x44
-#define MEMTYPE_8BIT 0x00
-#define MEMTYPE_16BIT 0x02
-#define MEMTYPE_RANGE 0x00
-#define MEMTYPE_HIADDR 0x01
-#define IREG_IO0_BASEHI 0x60
-#define IREG_IO0_BASELO 0x61
-#define IREG_IO1_BASEHI 0x62
-#define IREG_IO1_BASELO 0x63
-#define IREG_IRQ_NUMBER 0x70
-#define IREG_IRQ_TYPE 0x71
-#define IRQTYPE_HIGH 0x02
-#define IRQTYPE_LOW 0x00
-#define IRQTYPE_LEVEL 0x01
-#define IRQTYPE_EDGE 0x00
-X
-#define HIBYTE(w) ((BYTE)(((WORD)(w) >> 8) & 0xFF))
-#define LOBYTE(w) ((BYTE)(w))
-#define MAKEWORD(low,hi) ((WORD)(((BYTE)(low))|(((WORD)((BYTE)(hi)))<<8)))
-X
-typedef __u8 BYTE;
-typedef __u16 USHORT;
-typedef __u16 WORD;
-X
-static int config_port = -1;
-X
-static int msnd_write_cfg(int cfg, int reg, int value)
-{
-X outb(reg, cfg);
-X outb(value, cfg + 1);
-X if (value != inb(cfg + 1)) {
-X fprintf(stderr, "error: msnd_write_cfg: I/O error\n");
-X return -EIO;
-X }
-X return 0;
-}
-X
-static int msnd_read_cfg(int cfg, int reg)
-{
-X outb(reg, cfg);
-X return inb(cfg + 1);
-}
-X
-static int msnd_write_cfg_io0(int cfg, int num, WORD io)
-{
-X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
-X return -EIO;
-X if (msnd_write_cfg(cfg, IREG_IO0_BASEHI, HIBYTE(io)))
-X return -EIO;
-X if (msnd_write_cfg(cfg, IREG_IO0_BASELO, LOBYTE(io)))
-X return -EIO;
-X return 0;
-}
-X
-static int msnd_read_cfg_io0(int cfg, int num, WORD *io)
-{
-X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
-X return -EIO;
-X
-X *io = MAKEWORD(msnd_read_cfg(cfg, IREG_IO0_BASELO),
-X msnd_read_cfg(cfg, IREG_IO0_BASEHI));
-X
-X return 0;
-}
-X
-static int msnd_write_cfg_io1(int cfg, int num, WORD io)
-{
-X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
-X return -EIO;
-X if (msnd_write_cfg(cfg, IREG_IO1_BASEHI, HIBYTE(io)))
-X return -EIO;
-X if (msnd_write_cfg(cfg, IREG_IO1_BASELO, LOBYTE(io)))
-X return -EIO;
-X return 0;
-}
-X
-static int msnd_read_cfg_io1(int cfg, int num, WORD *io)
-{
-X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
-X return -EIO;
-X
-X *io = MAKEWORD(msnd_read_cfg(cfg, IREG_IO1_BASELO),
-X msnd_read_cfg(cfg, IREG_IO1_BASEHI));
-X
-X return 0;
-}
-X
-static int msnd_write_cfg_irq(int cfg, int num, WORD irq)
-{
-X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
-X return -EIO;
-X if (msnd_write_cfg(cfg, IREG_IRQ_NUMBER, LOBYTE(irq)))
-X return -EIO;
-X if (msnd_write_cfg(cfg, IREG_IRQ_TYPE, IRQTYPE_EDGE))
-X return -EIO;
-X return 0;
-}
-X
-static int msnd_read_cfg_irq(int cfg, int num, WORD *irq)
-{
-X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
-X return -EIO;
-X
-X *irq = msnd_read_cfg(cfg, IREG_IRQ_NUMBER);
-X
-X return 0;
-}
-X
-static int msnd_write_cfg_mem(int cfg, int num, int mem)
-{
-X WORD wmem;
-X
-X mem >>= 8;
-X mem &= 0xfff;
-X wmem = (WORD)mem;
-X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
-X return -EIO;
-X if (msnd_write_cfg(cfg, IREG_MEMBASEHI, HIBYTE(wmem)))
-X return -EIO;
-X if (msnd_write_cfg(cfg, IREG_MEMBASELO, LOBYTE(wmem)))
-X return -EIO;
-X if (wmem && msnd_write_cfg(cfg, IREG_MEMCONTROL, (MEMTYPE_HIADDR | MEMTYPE_16BIT)))
-X return -EIO;
-X return 0;
-}
-X
-static int msnd_read_cfg_mem(int cfg, int num, int *mem)
-{
-X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
-X return -EIO;
-X
-X *mem = MAKEWORD(msnd_read_cfg(cfg, IREG_MEMBASELO),
-X msnd_read_cfg(cfg, IREG_MEMBASEHI));
-X *mem <<= 8;
-X
-X return 0;
-}
-X
-static int msnd_activate_logical(int cfg, int num)
-{
-X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
-X return -EIO;
-X if (msnd_write_cfg(cfg, IREG_ACTIVATE, LD_ACTIVATE))
-X return -EIO;
-X return 0;
-}
-X
-static int msnd_write_cfg_logical(int cfg, int num, WORD io0, WORD io1, WORD irq, int mem)
-{
-X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
-X return -EIO;
-X if (msnd_write_cfg_io0(cfg, num, io0))
-X return -EIO;
-X if (msnd_write_cfg_io1(cfg, num, io1))
-X return -EIO;
-X if (msnd_write_cfg_irq(cfg, num, irq))
-X return -EIO;
-X if (msnd_write_cfg_mem(cfg, num, mem))
-X return -EIO;
-X if (msnd_activate_logical(cfg, num))
-X return -EIO;
-X return 0;
-}
-X
-static int msnd_read_cfg_logical(int cfg, int num, WORD *io0, WORD *io1, WORD *irq, int *mem)
-{
-X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
-X return -EIO;
-X if (msnd_read_cfg_io0(cfg, num, io0))
-X return -EIO;
-X if (msnd_read_cfg_io1(cfg, num, io1))
-X return -EIO;
-X if (msnd_read_cfg_irq(cfg, num, irq))
-X return -EIO;
-X if (msnd_read_cfg_mem(cfg, num, mem))
-X return -EIO;
-X return 0;
-}
-X
-static void usage(void)
-{
-X fprintf(stderr,
-X "\n"
-X "pinnaclecfg 1.0\n"
-X "\n"
-X "usage: pinnaclecfg <config port> [device config]\n"
-X "\n"
-X "This is for use with the card in NON-PnP mode only.\n"
-X "\n"
-X "Available devices (not all available for Fiji):\n"
-X "\n"
-X " Device Description\n"
-X " -------------------------------------------------------------------\n"
-X " reset Reset all devices (i.e. disable)\n"
-X " show Display current device configurations\n"
-X "\n"
-X " dsp <io> <irq> <mem> Audio device\n"
-X " mpu <io> <irq> Internal Kurzweil synth\n"
-X " ide <io0> <io1> <irq> On-board IDE controller\n"
-X " joystick <io> Joystick port\n"
-X "\n");
-X exit(1);
-}
-X
-static int cfg_reset(void)
-{
-X int i;
-X
-X for (i = 0; i < 4; ++i)
-X msnd_write_cfg_logical(config_port, i, 0, 0, 0, 0);
-X
-X return 0;
-}
-X
-static int cfg_show(void)
-{
-X int i;
-X int count = 0;
-X
-X for (i = 0; i < 4; ++i) {
-X WORD io0, io1, irq;
-X int mem;
-X msnd_read_cfg_logical(config_port, i, &io0, &io1, &irq, &mem);
-X switch (i) {
-X case 0:
-X if (io0 || irq || mem) {
-X printf("dsp 0x%x %d 0x%x\n", io0, irq, mem);
-X ++count;
-X }
-X break;
-X case 1:
-X if (io0 || irq) {
-X printf("mpu 0x%x %d\n", io0, irq);
-X ++count;
-X }
-X break;
-X case 2:
-X if (io0 || io1 || irq) {
-X printf("ide 0x%x 0x%x %d\n", io0, io1, irq);
-X ++count;
-X }
-X break;
-X case 3:
-X if (io0) {
-X printf("joystick 0x%x\n", io0);
-X ++count;
-X }
-X break;
-X }
-X }
-X
-X if (count == 0)
-X fprintf(stderr, "no devices configured\n");
-X
-X return 0;
-}
-X
-static int cfg_dsp(int argc, char *argv[])
-{
-X int io, irq, mem;
-X
-X if (argc < 3 ||
-X sscanf(argv[0], "0x%x", &io) != 1 ||
-X sscanf(argv[1], "%d", &irq) != 1 ||
-X sscanf(argv[2], "0x%x", &mem) != 1)
-X usage();
-X
-X if (!(io == 0x290 ||
-X io == 0x260 ||
-X io == 0x250 ||
-X io == 0x240 ||
-X io == 0x230 ||
-X io == 0x220 ||
-X io == 0x210 ||
-X io == 0x3e0)) {
-X fprintf(stderr, "error: io must be one of "
-X "210, 220, 230, 240, 250, 260, 290, or 3E0\n");
-X usage();
-X }
-X
-X if (!(irq == 5 ||
-X irq == 7 ||
-X irq == 9 ||
-X irq == 10 ||
-X irq == 11 ||
-X irq == 12)) {
-X fprintf(stderr, "error: irq must be one of "
-X "5, 7, 9, 10, 11 or 12\n");
-X usage();
-X }
-X
-X if (!(mem == 0xb0000 ||
-X mem == 0xc8000 ||
-X mem == 0xd0000 ||
-X mem == 0xd8000 ||
-X mem == 0xe0000 ||
-X mem == 0xe8000)) {
-X fprintf(stderr, "error: mem must be one of "
-X "0xb0000, 0xc8000, 0xd0000, 0xd8000, 0xe0000 or 0xe8000\n");
-X usage();
-X }
-X
-X return msnd_write_cfg_logical(config_port, 0, io, 0, irq, mem);
-}
-X
-static int cfg_mpu(int argc, char *argv[])
-{
-X int io, irq;
-X
-X if (argc < 2 ||
-X sscanf(argv[0], "0x%x", &io) != 1 ||
-X sscanf(argv[1], "%d", &irq) != 1)
-X usage();
-X
-X return msnd_write_cfg_logical(config_port, 1, io, 0, irq, 0);
-}
-X
-static int cfg_ide(int argc, char *argv[])
-{
-X int io0, io1, irq;
-X
-X if (argc < 3 ||
-X sscanf(argv[0], "0x%x", &io0) != 1 ||
-X sscanf(argv[0], "0x%x", &io1) != 1 ||
-X sscanf(argv[1], "%d", &irq) != 1)
-X usage();
-X
-X return msnd_write_cfg_logical(config_port, 2, io0, io1, irq, 0);
-}
-X
-static int cfg_joystick(int argc, char *argv[])
-{
-X int io;
-X
-X if (argc < 1 ||
-X sscanf(argv[0], "0x%x", &io) != 1)
-X usage();
-X
-X return msnd_write_cfg_logical(config_port, 3, io, 0, 0, 0);
-}
-X
-int main(int argc, char *argv[])
-{
-X char *device;
-X int rv = 0;
-X
-X --argc; ++argv;
-X
-X if (argc < 2)
-X usage();
-X
-X sscanf(argv[0], "0x%x", &config_port);
-X if (config_port != 0x250 && config_port != 0x260 && config_port != 0x270) {
-X fprintf(stderr, "error: <config port> must be 0x250, 0x260 or 0x270\n");
-X exit(1);
-X }
-X if (ioperm(config_port, 2, 1)) {
-X perror("ioperm");
-X fprintf(stderr, "note: pinnaclecfg must be run as root\n");
-X exit(1);
-X }
-X device = argv[1];
-X
-X argc -= 2; argv += 2;
-X
-X if (strcmp(device, "reset") == 0)
-X rv = cfg_reset();
-X else if (strcmp(device, "show") == 0)
-X rv = cfg_show();
-X else if (strcmp(device, "dsp") == 0)
-X rv = cfg_dsp(argc, argv);
-X else if (strcmp(device, "mpu") == 0)
-X rv = cfg_mpu(argc, argv);
-X else if (strcmp(device, "ide") == 0)
-X rv = cfg_ide(argc, argv);
-X else if (strcmp(device, "joystick") == 0)
-X rv = cfg_joystick(argc, argv);
-X else {
-X fprintf(stderr, "error: unknown device %s\n", device);
-X usage();
-X }
-X
-X if (rv)
-X fprintf(stderr, "error: device configuration failed\n");
-X
-X return 0;
-}
-SHAR_EOF
- $shar_touch -am 1204092598 'MultiSound.d/pinnaclecfg.c' &&
- chmod 0664 'MultiSound.d/pinnaclecfg.c' ||
- $echo 'restore of' 'MultiSound.d/pinnaclecfg.c' 'failed'
- if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
- && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
- md5sum -c << SHAR_EOF >/dev/null 2>&1 \
- || $echo 'MultiSound.d/pinnaclecfg.c:' 'MD5 check failed'
-366bdf27f0db767a3c7921d0a6db20fe MultiSound.d/pinnaclecfg.c
-SHAR_EOF
- else
- shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/pinnaclecfg.c'`"
- test 10235 -eq "$shar_count" ||
- $echo 'MultiSound.d/pinnaclecfg.c:' 'original size' '10235,' 'current size' "$shar_count!"
- fi
-fi
-# ============= MultiSound.d/Makefile ==============
-if test -f 'MultiSound.d/Makefile' && test "$first_param" != -c; then
- $echo 'x -' SKIPPING 'MultiSound.d/Makefile' '(file already exists)'
-else
- $echo 'x -' extracting 'MultiSound.d/Makefile' '(text)'
- sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/Makefile' &&
-CC = gcc
-CFLAGS = -O
-PROGS = setdigital msndreset pinnaclecfg conv
-X
-all: $(PROGS)
-X
-clean:
-X rm -f $(PROGS)
-SHAR_EOF
- $shar_touch -am 1204092398 'MultiSound.d/Makefile' &&
- chmod 0664 'MultiSound.d/Makefile' ||
- $echo 'restore of' 'MultiSound.d/Makefile' 'failed'
- if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
- && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
- md5sum -c << SHAR_EOF >/dev/null 2>&1 \
- || $echo 'MultiSound.d/Makefile:' 'MD5 check failed'
-76ca8bb44e3882edcf79c97df6c81845 MultiSound.d/Makefile
-SHAR_EOF
- else
- shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/Makefile'`"
- test 106 -eq "$shar_count" ||
- $echo 'MultiSound.d/Makefile:' 'original size' '106,' 'current size' "$shar_count!"
- fi
-fi
-# ============= MultiSound.d/conv.l ==============
-if test -f 'MultiSound.d/conv.l' && test "$first_param" != -c; then
- $echo 'x -' SKIPPING 'MultiSound.d/conv.l' '(file already exists)'
-else
- $echo 'x -' extracting 'MultiSound.d/conv.l' '(text)'
- sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/conv.l' &&
-%%
-[ \n\t,\r]
-\;.*
-DB
-[0-9A-Fa-f]+H { int n; sscanf(yytext, "%xH", &n); printf("%c", n); }
-%%
-int yywrap() { return 1; }
-main() { yylex(); }
-SHAR_EOF
- $shar_touch -am 0828231798 'MultiSound.d/conv.l' &&
- chmod 0664 'MultiSound.d/conv.l' ||
- $echo 'restore of' 'MultiSound.d/conv.l' 'failed'
- if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
- && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
- md5sum -c << SHAR_EOF >/dev/null 2>&1 \
- || $echo 'MultiSound.d/conv.l:' 'MD5 check failed'
-d2411fc32cd71a00dcdc1f009e858dd2 MultiSound.d/conv.l
-SHAR_EOF
- else
- shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/conv.l'`"
- test 141 -eq "$shar_count" ||
- $echo 'MultiSound.d/conv.l:' 'original size' '141,' 'current size' "$shar_count!"
- fi
-fi
-# ============= MultiSound.d/msndreset.c ==============
-if test -f 'MultiSound.d/msndreset.c' && test "$first_param" != -c; then
- $echo 'x -' SKIPPING 'MultiSound.d/msndreset.c' '(file already exists)'
-else
- $echo 'x -' extracting 'MultiSound.d/msndreset.c' '(text)'
- sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/msndreset.c' &&
-/*********************************************************************
-X *
-X * msndreset.c - resets the MultiSound card
-X *
-X * Copyright (C) 1998 Andrew Veliath
-X *
-X * This program is free software; you can redistribute it and/or modify
-X * it under the terms of the GNU General Public License as published by
-X * the Free Software Foundation; either version 2 of the License, or
-X * (at your option) any later version.
-X *
-X * This program is distributed in the hope that it will be useful,
-X * but WITHOUT ANY WARRANTY; without even the implied warranty of
-X * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-X * GNU General Public License for more details.
-X *
-X * You should have received a copy of the GNU General Public License
-X * along with this program; if not, write to the Free Software
-X * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-X *
-X ********************************************************************/
-X
-#include <stdio.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/ioctl.h>
-#include <sys/soundcard.h>
-X
-int main(int argc, char *argv[])
-{
-X int fd;
-X
-X if (argc != 2) {
-X fprintf(stderr, "usage: msndreset <mixer device>\n");
-X exit(1);
-X }
-X
-X if ((fd = open(argv[1], O_RDWR)) < 0) {
-X perror(argv[1]);
-X exit(1);
-X }
-X
-X if (ioctl(fd, SOUND_MIXER_PRIVATE1, 0) < 0) {
-X fprintf(stderr, "error: msnd ioctl reset failed\n");
-X perror("ioctl");
-X close(fd);
-X exit(1);
-X }
-X
-X close(fd);
-X
-X return 0;
-}
-SHAR_EOF
- $shar_touch -am 1204100698 'MultiSound.d/msndreset.c' &&
- chmod 0664 'MultiSound.d/msndreset.c' ||
- $echo 'restore of' 'MultiSound.d/msndreset.c' 'failed'
- if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
- && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
- md5sum -c << SHAR_EOF >/dev/null 2>&1 \
- || $echo 'MultiSound.d/msndreset.c:' 'MD5 check failed'
-c52f876521084e8eb25e12e01dcccb8a MultiSound.d/msndreset.c
-SHAR_EOF
- else
- shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/msndreset.c'`"
- test 1472 -eq "$shar_count" ||
- $echo 'MultiSound.d/msndreset.c:' 'original size' '1472,' 'current size' "$shar_count!"
- fi
-fi
-rm -fr _sh01426
-exit 0