summaryrefslogtreecommitdiffstats
path: root/Documentation/timers/timers-howto.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/timers/timers-howto.rst')
-rw-r--r--Documentation/timers/timers-howto.rst112
1 files changed, 112 insertions, 0 deletions
diff --git a/Documentation/timers/timers-howto.rst b/Documentation/timers/timers-howto.rst
new file mode 100644
index 000000000000..7e3167bec2b1
--- /dev/null
+++ b/Documentation/timers/timers-howto.rst
@@ -0,0 +1,112 @@
+===================================================================
+delays - Information on the various kernel delay / sleep mechanisms
+===================================================================
+
+This document seeks to answer the common question: "What is the
+RightWay (TM) to insert a delay?"
+
+This question is most often faced by driver writers who have to
+deal with hardware delays and who may not be the most intimately
+familiar with the inner workings of the Linux Kernel.
+
+
+Inserting Delays
+----------------
+
+The first, and most important, question you need to ask is "Is my
+code in an atomic context?" This should be followed closely by "Does
+it really need to delay in atomic context?" If so...
+
+ATOMIC CONTEXT:
+ You must use the `*delay` family of functions. These
+ functions use the jiffie estimation of clock speed
+ and will busy wait for enough loop cycles to achieve
+ the desired delay:
+
+ ndelay(unsigned long nsecs)
+ udelay(unsigned long usecs)
+ mdelay(unsigned long msecs)
+
+ udelay is the generally preferred API; ndelay-level
+ precision may not actually exist on many non-PC devices.
+
+ mdelay is macro wrapper around udelay, to account for
+ possible overflow when passing large arguments to udelay.
+ In general, use of mdelay is discouraged and code should
+ be refactored to allow for the use of msleep.
+
+NON-ATOMIC CONTEXT:
+ You should use the `*sleep[_range]` family of functions.
+ There are a few more options here, while any of them may
+ work correctly, using the "right" sleep function will
+ help the scheduler, power management, and just make your
+ driver better :)
+
+ -- Backed by busy-wait loop:
+
+ udelay(unsigned long usecs)
+
+ -- Backed by hrtimers:
+
+ usleep_range(unsigned long min, unsigned long max)
+
+ -- Backed by jiffies / legacy_timers
+
+ msleep(unsigned long msecs)
+ msleep_interruptible(unsigned long msecs)
+
+ Unlike the `*delay` family, the underlying mechanism
+ driving each of these calls varies, thus there are
+ quirks you should be aware of.
+
+
+ SLEEPING FOR "A FEW" USECS ( < ~10us? ):
+ * Use udelay
+
+ - Why not usleep?
+ On slower systems, (embedded, OR perhaps a speed-
+ stepped PC!) the overhead of setting up the hrtimers
+ for usleep *may* not be worth it. Such an evaluation
+ will obviously depend on your specific situation, but
+ it is something to be aware of.
+
+ SLEEPING FOR ~USECS OR SMALL MSECS ( 10us - 20ms):
+ * Use usleep_range
+
+ - Why not msleep for (1ms - 20ms)?
+ Explained originally here:
+ http://lkml.org/lkml/2007/8/3/250
+
+ msleep(1~20) may not do what the caller intends, and
+ will often sleep longer (~20 ms actual sleep for any
+ value given in the 1~20ms range). In many cases this
+ is not the desired behavior.
+
+ - Why is there no "usleep" / What is a good range?
+ Since usleep_range is built on top of hrtimers, the
+ wakeup will be very precise (ish), thus a simple
+ usleep function would likely introduce a large number
+ of undesired interrupts.
+
+ With the introduction of a range, the scheduler is
+ free to coalesce your wakeup with any other wakeup
+ that may have happened for other reasons, or at the
+ worst case, fire an interrupt for your upper bound.
+
+ The larger a range you supply, the greater a chance
+ that you will not trigger an interrupt; this should
+ be balanced with what is an acceptable upper bound on
+ delay / performance for your specific code path. Exact
+ tolerances here are very situation specific, thus it
+ is left to the caller to determine a reasonable range.
+
+ SLEEPING FOR LARGER MSECS ( 10ms+ )
+ * Use msleep or possibly msleep_interruptible
+
+ - What's the difference?
+ msleep sets the current task to TASK_UNINTERRUPTIBLE
+ whereas msleep_interruptible sets the current task to
+ TASK_INTERRUPTIBLE before scheduling the sleep. In
+ short, the difference is whether the sleep can be ended
+ early by a signal. In general, just use msleep unless
+ you know you have a need for the interruptible variant.