summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-class-cxl7
-rw-r--r--Documentation/device-mapper/dm-raid.txt1
-rw-r--r--Documentation/devicetree/bindings/clock/uniphier-clock.txt16
-rw-r--r--Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt23
-rw-r--r--Documentation/devicetree/bindings/ipmi/ipmi-smic.txt (renamed from Documentation/devicetree/bindings/ipmi.txt)0
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt4
-rw-r--r--Documentation/devicetree/bindings/reset/uniphier-reset.txt62
-rw-r--r--Documentation/devicetree/bindings/serial/cdns,uart.txt4
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,sci-serial.txt8
-rw-r--r--Documentation/devicetree/bindings/timer/jcore,pit.txt24
-rw-r--r--Documentation/devicetree/bindings/usb/dwc2.txt5
-rw-r--r--Documentation/filesystems/proc.txt26
-rw-r--r--Documentation/gpio/board.txt11
13 files changed, 114 insertions, 77 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl
index 4ba0a2a61926..640f65e79ef1 100644
--- a/Documentation/ABI/testing/sysfs-class-cxl
+++ b/Documentation/ABI/testing/sysfs-class-cxl
@@ -220,8 +220,11 @@ What: /sys/class/cxl/<card>/reset
Date: October 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: write only
- Writing 1 will issue a PERST to card which may cause the card
- to reload the FPGA depending on load_image_on_perst.
+ Writing 1 will issue a PERST to card provided there are no
+ contexts active on any one of the card AFUs. This may cause
+ the card to reload the FPGA depending on load_image_on_perst.
+ Writing -1 will do a force PERST irrespective of any active
+ contexts on the card AFUs.
Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<card>/perst_reloads_same_image (not in a guest)
diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt
index e5b6497116f4..c75b64a85859 100644
--- a/Documentation/device-mapper/dm-raid.txt
+++ b/Documentation/device-mapper/dm-raid.txt
@@ -309,3 +309,4 @@ Version History
with a reshape in progress.
1.9.0 Add support for RAID level takeover/reshape/region size
and set size reduction.
+1.9.1 Fix activation of existing RAID 4/10 mapped devices
diff --git a/Documentation/devicetree/bindings/clock/uniphier-clock.txt b/Documentation/devicetree/bindings/clock/uniphier-clock.txt
index c7179d3b5c33..812163060fa3 100644
--- a/Documentation/devicetree/bindings/clock/uniphier-clock.txt
+++ b/Documentation/devicetree/bindings/clock/uniphier-clock.txt
@@ -24,7 +24,7 @@ Example:
reg = <0x61840000 0x4000>;
clock {
- compatible = "socionext,uniphier-ld20-clock";
+ compatible = "socionext,uniphier-ld11-clock";
#clock-cells = <1>;
};
@@ -43,8 +43,8 @@ Provided clocks:
21: USB3 ch1 PHY1
-Media I/O (MIO) clock
----------------------
+Media I/O (MIO) clock, SD clock
+-------------------------------
Required properties:
- compatible: should be one of the following:
@@ -52,10 +52,10 @@ Required properties:
"socionext,uniphier-ld4-mio-clock" - for LD4 SoC.
"socionext,uniphier-pro4-mio-clock" - for Pro4 SoC.
"socionext,uniphier-sld8-mio-clock" - for sLD8 SoC.
- "socionext,uniphier-pro5-mio-clock" - for Pro5 SoC.
- "socionext,uniphier-pxs2-mio-clock" - for PXs2/LD6b SoC.
+ "socionext,uniphier-pro5-sd-clock" - for Pro5 SoC.
+ "socionext,uniphier-pxs2-sd-clock" - for PXs2/LD6b SoC.
"socionext,uniphier-ld11-mio-clock" - for LD11 SoC.
- "socionext,uniphier-ld20-mio-clock" - for LD20 SoC.
+ "socionext,uniphier-ld20-sd-clock" - for LD20 SoC.
- #clock-cells: should be 1.
Example:
@@ -66,7 +66,7 @@ Example:
reg = <0x59810000 0x800>;
clock {
- compatible = "socionext,uniphier-ld20-mio-clock";
+ compatible = "socionext,uniphier-ld11-mio-clock";
#clock-cells = <1>;
};
@@ -112,7 +112,7 @@ Example:
reg = <0x59820000 0x200>;
clock {
- compatible = "socionext,uniphier-ld20-peri-clock";
+ compatible = "socionext,uniphier-ld11-peri-clock";
#clock-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt
new file mode 100644
index 000000000000..fbbacd958240
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt
@@ -0,0 +1,23 @@
+* Aspeed BT (Block Transfer) IPMI interface
+
+The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs
+(BaseBoard Management Controllers) and the BT interface can be used to
+perform in-band IPMI communication with their host.
+
+Required properties:
+
+- compatible : should be "aspeed,ast2400-bt-bmc"
+- reg: physical address and size of the registers
+
+Optional properties:
+
+- interrupts: interrupt generated by the BT interface. without an
+ interrupt, the driver will operate in poll mode.
+
+Example:
+
+ ibt@1e789140 {
+ compatible = "aspeed,ast2400-bt-bmc";
+ reg = <0x1e789140 0x18>;
+ interrupts = <8>;
+ };
diff --git a/Documentation/devicetree/bindings/ipmi.txt b/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt
index d5f1a877ed3e..d5f1a877ed3e 100644
--- a/Documentation/devicetree/bindings/ipmi.txt
+++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
index 5e60ad18f147..2ad18c4ea55c 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
@@ -43,7 +43,9 @@ aspeed,ast2500-pinctrl, aspeed,g5-pinctrl:
GPID0 GPID2 GPIE0 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6 I2C7 I2C8
I2C9 MAC1LINK MDIO1 MDIO2 OSCCLK PEWAKE PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7
-RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8
+RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 SPI1DEBUG SPI1PASSTHRU TIMER4 TIMER5 TIMER6
+TIMER7 TIMER8 VGABIOSROM
+
Examples:
diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
index e6bbfccd56c3..5020524cddeb 100644
--- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
+++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
@@ -6,25 +6,25 @@ System reset
Required properties:
- compatible: should be one of the following:
- "socionext,uniphier-sld3-reset" - for PH1-sLD3 SoC.
- "socionext,uniphier-ld4-reset" - for PH1-LD4 SoC.
- "socionext,uniphier-pro4-reset" - for PH1-Pro4 SoC.
- "socionext,uniphier-sld8-reset" - for PH1-sLD8 SoC.
- "socionext,uniphier-pro5-reset" - for PH1-Pro5 SoC.
- "socionext,uniphier-pxs2-reset" - for ProXstream2/PH1-LD6b SoC.
- "socionext,uniphier-ld11-reset" - for PH1-LD11 SoC.
- "socionext,uniphier-ld20-reset" - for PH1-LD20 SoC.
+ "socionext,uniphier-sld3-reset" - for sLD3 SoC.
+ "socionext,uniphier-ld4-reset" - for LD4 SoC.
+ "socionext,uniphier-pro4-reset" - for Pro4 SoC.
+ "socionext,uniphier-sld8-reset" - for sLD8 SoC.
+ "socionext,uniphier-pro5-reset" - for Pro5 SoC.
+ "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC.
+ "socionext,uniphier-ld11-reset" - for LD11 SoC.
+ "socionext,uniphier-ld20-reset" - for LD20 SoC.
- #reset-cells: should be 1.
Example:
sysctrl@61840000 {
- compatible = "socionext,uniphier-ld20-sysctrl",
+ compatible = "socionext,uniphier-ld11-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x4000>;
reset {
- compatible = "socionext,uniphier-ld20-reset";
+ compatible = "socionext,uniphier-ld11-reset";
#reset-cells = <1>;
};
@@ -32,30 +32,30 @@ Example:
};
-Media I/O (MIO) reset
----------------------
+Media I/O (MIO) reset, SD reset
+-------------------------------
Required properties:
- compatible: should be one of the following:
- "socionext,uniphier-sld3-mio-reset" - for PH1-sLD3 SoC.
- "socionext,uniphier-ld4-mio-reset" - for PH1-LD4 SoC.
- "socionext,uniphier-pro4-mio-reset" - for PH1-Pro4 SoC.
- "socionext,uniphier-sld8-mio-reset" - for PH1-sLD8 SoC.
- "socionext,uniphier-pro5-mio-reset" - for PH1-Pro5 SoC.
- "socionext,uniphier-pxs2-mio-reset" - for ProXstream2/PH1-LD6b SoC.
- "socionext,uniphier-ld11-mio-reset" - for PH1-LD11 SoC.
- "socionext,uniphier-ld20-mio-reset" - for PH1-LD20 SoC.
+ "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC.
+ "socionext,uniphier-ld4-mio-reset" - for LD4 SoC.
+ "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC.
+ "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC.
+ "socionext,uniphier-pro5-sd-reset" - for Pro5 SoC.
+ "socionext,uniphier-pxs2-sd-reset" - for PXs2/LD6b SoC.
+ "socionext,uniphier-ld11-mio-reset" - for LD11 SoC.
+ "socionext,uniphier-ld20-sd-reset" - for LD20 SoC.
- #reset-cells: should be 1.
Example:
mioctrl@59810000 {
- compatible = "socionext,uniphier-ld20-mioctrl",
+ compatible = "socionext,uniphier-ld11-mioctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x800>;
reset {
- compatible = "socionext,uniphier-ld20-mio-reset";
+ compatible = "socionext,uniphier-ld11-mio-reset";
#reset-cells = <1>;
};
@@ -68,24 +68,24 @@ Peripheral reset
Required properties:
- compatible: should be one of the following:
- "socionext,uniphier-ld4-peri-reset" - for PH1-LD4 SoC.
- "socionext,uniphier-pro4-peri-reset" - for PH1-Pro4 SoC.
- "socionext,uniphier-sld8-peri-reset" - for PH1-sLD8 SoC.
- "socionext,uniphier-pro5-peri-reset" - for PH1-Pro5 SoC.
- "socionext,uniphier-pxs2-peri-reset" - for ProXstream2/PH1-LD6b SoC.
- "socionext,uniphier-ld11-peri-reset" - for PH1-LD11 SoC.
- "socionext,uniphier-ld20-peri-reset" - for PH1-LD20 SoC.
+ "socionext,uniphier-ld4-peri-reset" - for LD4 SoC.
+ "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC.
+ "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC.
+ "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC.
+ "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC.
+ "socionext,uniphier-ld11-peri-reset" - for LD11 SoC.
+ "socionext,uniphier-ld20-peri-reset" - for LD20 SoC.
- #reset-cells: should be 1.
Example:
perictrl@59820000 {
- compatible = "socionext,uniphier-ld20-perictrl",
+ compatible = "socionext,uniphier-ld11-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
reset {
- compatible = "socionext,uniphier-ld20-peri-reset";
+ compatible = "socionext,uniphier-ld11-peri-reset";
#reset-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.txt b/Documentation/devicetree/bindings/serial/cdns,uart.txt
index a3eb154c32ca..227bb770b027 100644
--- a/Documentation/devicetree/bindings/serial/cdns,uart.txt
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.txt
@@ -1,7 +1,9 @@
Binding for Cadence UART Controller
Required properties:
-- compatible : should be "cdns,uart-r1p8", or "xlnx,xuartps"
+- compatible :
+ Use "xlnx,xuartps","cdns,uart-r1p8" for Zynq-7xxx SoC.
+ Use "xlnx,zynqmp-uart","cdns,uart-r1p12" for Zynq Ultrascale+ MPSoC.
- reg: Should contain UART controller registers location and length.
- interrupts: Should contain UART controller interrupts.
- clocks: Must contain phandles to the UART clocks
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index 1e4000d83aee..8d27d1a603e7 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -9,6 +9,14 @@ Required properties:
- "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART.
- "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART.
- "renesas,scifb-r8a7740" for R8A7740 (R-Mobile A1) SCIFB compatible UART.
+ - "renesas,scif-r8a7743" for R8A7743 (RZ/G1M) SCIF compatible UART.
+ - "renesas,scifa-r8a7743" for R8A7743 (RZ/G1M) SCIFA compatible UART.
+ - "renesas,scifb-r8a7743" for R8A7743 (RZ/G1M) SCIFB compatible UART.
+ - "renesas,hscif-r8a7743" for R8A7743 (RZ/G1M) HSCIF compatible UART.
+ - "renesas,scif-r8a7745" for R8A7745 (RZ/G1E) SCIF compatible UART.
+ - "renesas,scifa-r8a7745" for R8A7745 (RZ/G1E) SCIFA compatible UART.
+ - "renesas,scifb-r8a7745" for R8A7745 (RZ/G1E) SCIFB compatible UART.
+ - "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART.
- "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART.
- "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART.
- "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.
diff --git a/Documentation/devicetree/bindings/timer/jcore,pit.txt b/Documentation/devicetree/bindings/timer/jcore,pit.txt
new file mode 100644
index 000000000000..af5dd35469d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/jcore,pit.txt
@@ -0,0 +1,24 @@
+J-Core Programmable Interval Timer and Clocksource
+
+Required properties:
+
+- compatible: Must be "jcore,pit".
+
+- reg: Memory region(s) for timer/clocksource registers. For SMP,
+ there should be one region per cpu, indexed by the sequential,
+ zero-based hardware cpu number.
+
+- interrupts: An interrupt to assign for the timer. The actual pit
+ core is integrated with the aic and allows the timer interrupt
+ assignment to be programmed by software, but this property is
+ required in order to reserve an interrupt number that doesn't
+ conflict with other devices.
+
+
+Example:
+
+timer@200 {
+ compatible = "jcore,pit";
+ reg = < 0x200 0x30 0x500 0x30 >;
+ interrupts = < 0x48 >;
+};
diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index 455f2c310a1b..2c30a5479069 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -28,10 +28,7 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties
- g-use-dma: enable dma usage in gadget driver.
- g-rx-fifo-size: size of rx fifo size in gadget mode.
- g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
-
-Deprecated properties:
-- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0)
- in gadget mode.
+- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
Example:
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 219ffd41a911..74329fd0add2 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -395,32 +395,6 @@ is not associated with a file:
or if empty, the mapping is anonymous.
-The /proc/PID/task/TID/maps is a view of the virtual memory from the viewpoint
-of the individual tasks of a process. In this file you will see a mapping marked
-as [stack] if that task sees it as a stack. Hence, for the example above, the
-task-level map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this:
-
-08048000-08049000 r-xp 00000000 03:00 8312 /opt/test
-08049000-0804a000 rw-p 00001000 03:00 8312 /opt/test
-0804a000-0806b000 rw-p 00000000 00:00 0 [heap]
-a7cb1000-a7cb2000 ---p 00000000 00:00 0
-a7cb2000-a7eb2000 rw-p 00000000 00:00 0
-a7eb2000-a7eb3000 ---p 00000000 00:00 0
-a7eb3000-a7ed5000 rw-p 00000000 00:00 0 [stack]
-a7ed5000-a8008000 r-xp 00000000 03:00 4222 /lib/libc.so.6
-a8008000-a800a000 r--p 00133000 03:00 4222 /lib/libc.so.6
-a800a000-a800b000 rw-p 00135000 03:00 4222 /lib/libc.so.6
-a800b000-a800e000 rw-p 00000000 00:00 0
-a800e000-a8022000 r-xp 00000000 03:00 14462 /lib/libpthread.so.0
-a8022000-a8023000 r--p 00013000 03:00 14462 /lib/libpthread.so.0
-a8023000-a8024000 rw-p 00014000 03:00 14462 /lib/libpthread.so.0
-a8024000-a8027000 rw-p 00000000 00:00 0
-a8027000-a8043000 r-xp 00000000 03:00 8317 /lib/ld-linux.so.2
-a8043000-a8044000 r--p 0001b000 03:00 8317 /lib/ld-linux.so.2
-a8044000-a8045000 rw-p 0001c000 03:00 8317 /lib/ld-linux.so.2
-aff35000-aff4a000 rw-p 00000000 00:00 0
-ffffe000-fffff000 r-xp 00000000 00:00 0 [vdso]
-
The /proc/PID/smaps is an extension based on maps, showing the memory
consumption for each of the process's mappings. For each of mappings there
is a series of lines such as the following:
diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt
index 40884c4fe40c..a0f61898d493 100644
--- a/Documentation/gpio/board.txt
+++ b/Documentation/gpio/board.txt
@@ -6,7 +6,7 @@ Note that it only applies to the new descriptor-based interface. For a
description of the deprecated integer-based GPIO interface please refer to
gpio-legacy.txt (actually, there is no real mapping possible with the old
interface; you just fetch an integer from somewhere and request the
-corresponding GPIO.
+corresponding GPIO).
All platforms can enable the GPIO library, but if the platform strictly
requires GPIO functionality to be present, it needs to select GPIOLIB from its
@@ -162,6 +162,9 @@ The driver controlling "foo.0" will then be able to obtain its GPIOs as follows:
Since the "led" GPIOs are mapped as active-high, this example will switch their
signals to 1, i.e. enabling the LEDs. And for the "power" GPIO, which is mapped
-as active-low, its actual signal will be 0 after this code. Contrary to the legacy
-integer GPIO interface, the active-low property is handled during mapping and is
-thus transparent to GPIO consumers.
+as active-low, its actual signal will be 0 after this code. Contrary to the
+legacy integer GPIO interface, the active-low property is handled during
+mapping and is thus transparent to GPIO consumers.
+
+A set of functions such as gpiod_set_value() is available to work with
+the new descriptor-oriented interface.