summaryrefslogtreecommitdiffstats
path: root/arch/arm/kernel/head.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/kernel/head.S')
-rw-r--r--arch/arm/kernel/head.S323
1 files changed, 208 insertions, 115 deletions
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index eb62bf947212..dd6b369ac69c 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -22,6 +22,10 @@
#include <asm/thread_info.h>
#include <asm/system.h>
+#ifdef CONFIG_DEBUG_LL
+#include <mach/debug-macro.S>
+#endif
+
#if (PHYS_OFFSET & 0x001fffff)
#error "PHYS_OFFSET must be at an even 2MiB boundary!"
#endif
@@ -86,6 +90,9 @@ ENTRY(stext)
movs r8, r5 @ invalid machine (r5=0)?
beq __error_a @ yes, error 'a'
bl __vet_atags
+#ifdef CONFIG_SMP_ON_UP
+ bl __fixup_smp
+#endif
bl __create_page_tables
/*
@@ -95,113 +102,15 @@ ENTRY(stext)
* above. On return, the CPU will be ready for the MMU to be
* turned on, and r0 will hold the CPU control register value.
*/
- ldr r13, __switch_data @ address to jump to after
+ ldr r13, =__mmap_switched @ address to jump to after
@ mmu has been enabled
- adr lr, BSYM(__enable_mmu) @ return (PIC) address
+ adr lr, BSYM(1f) @ return (PIC) address
ARM( add pc, r10, #PROCINFO_INITFUNC )
THUMB( add r12, r10, #PROCINFO_INITFUNC )
THUMB( mov pc, r12 )
+1: b __enable_mmu
ENDPROC(stext)
-
-#if defined(CONFIG_SMP)
-ENTRY(secondary_startup)
- /*
- * Common entry point for secondary CPUs.
- *
- * Ensure that we're in SVC mode, and IRQs are disabled. Lookup
- * the processor type - there is no need to check the machine type
- * as it has already been validated by the primary processor.
- */
- setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
- mrc p15, 0, r9, c0, c0 @ get processor id
- bl __lookup_processor_type
- movs r10, r5 @ invalid processor?
- moveq r0, #'p' @ yes, error 'p'
- beq __error
-
- /*
- * Use the page tables supplied from __cpu_up.
- */
- adr r4, __secondary_data
- ldmia r4, {r5, r7, r12} @ address to jump to after
- sub r4, r4, r5 @ mmu has been enabled
- ldr r4, [r7, r4] @ get secondary_data.pgdir
- adr lr, BSYM(__enable_mmu) @ return address
- mov r13, r12 @ __secondary_switched address
- ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor
- @ (return control reg)
- THUMB( add r12, r10, #PROCINFO_INITFUNC )
- THUMB( mov pc, r12 )
-ENDPROC(secondary_startup)
-
- /*
- * r6 = &secondary_data
- */
-ENTRY(__secondary_switched)
- ldr sp, [r7, #4] @ get secondary_data.stack
- mov fp, #0
- b secondary_start_kernel
-ENDPROC(__secondary_switched)
-
- .type __secondary_data, %object
-__secondary_data:
- .long .
- .long secondary_data
- .long __secondary_switched
-#endif /* defined(CONFIG_SMP) */
-
-
-
-/*
- * Setup common bits before finally enabling the MMU. Essentially
- * this is just loading the page table pointer and domain access
- * registers.
- */
-__enable_mmu:
-#ifdef CONFIG_ALIGNMENT_TRAP
- orr r0, r0, #CR_A
-#else
- bic r0, r0, #CR_A
-#endif
-#ifdef CONFIG_CPU_DCACHE_DISABLE
- bic r0, r0, #CR_C
-#endif
-#ifdef CONFIG_CPU_BPREDICT_DISABLE
- bic r0, r0, #CR_Z
-#endif
-#ifdef CONFIG_CPU_ICACHE_DISABLE
- bic r0, r0, #CR_I
-#endif
- mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
- domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
- domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
- domain_val(DOMAIN_IO, DOMAIN_CLIENT))
- mcr p15, 0, r5, c3, c0, 0 @ load domain access register
- mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
- b __turn_mmu_on
-ENDPROC(__enable_mmu)
-
-/*
- * Enable the MMU. This completely changes the structure of the visible
- * memory space. You will not be able to trace execution through this.
- * If you have an enquiry about this, *please* check the linux-arm-kernel
- * mailing list archives BEFORE sending another post to the list.
- *
- * r0 = cp#15 control register
- * r13 = *virtual* address to jump to upon completion
- *
- * other registers depend on the function called upon completion
- */
- .align 5
-__turn_mmu_on:
- mov r0, r0
- mcr p15, 0, r0, c1, c0, 0 @ write control reg
- mrc p15, 0, r3, c0, c0, 0 @ read id reg
- mov r3, r3
- mov r3, r13
- mov pc, r3
-ENDPROC(__turn_mmu_on)
-
+ .ltorg
/*
* Setup the initial page tables. We only setup the barest
@@ -213,7 +122,7 @@ ENDPROC(__turn_mmu_on)
* r10 = procinfo
*
* Returns:
- * r0, r3, r6, r7 corrupted
+ * r0, r3, r5-r7 corrupted
* r4 = physical page table address
*/
__create_page_tables:
@@ -235,20 +144,30 @@ __create_page_tables:
ldr r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
/*
- * Create identity mapping for first MB of kernel to
- * cater for the MMU enable. This identity mapping
- * will be removed by paging_init(). We use our current program
- * counter to determine corresponding section base address.
+ * Create identity mapping to cater for __enable_mmu.
+ * This identity mapping will be removed by paging_init().
*/
- mov r6, pc
- mov r6, r6, lsr #20 @ start of kernel section
- orr r3, r7, r6, lsl #20 @ flags + kernel base
- str r3, [r4, r6, lsl #2] @ identity mapping
+ adr r0, __enable_mmu_loc
+ ldmia r0, {r3, r5, r6}
+ sub r0, r0, r3 @ virt->phys offset
+ add r5, r5, r0 @ phys __enable_mmu
+ add r6, r6, r0 @ phys __enable_mmu_end
+ mov r5, r5, lsr #20
+ mov r6, r6, lsr #20
+
+1: orr r3, r7, r5, lsl #20 @ flags + kernel base
+ str r3, [r4, r5, lsl #2] @ identity mapping
+ teq r5, r6
+ addne r5, r5, #1 @ next section
+ bne 1b
/*
* Now setup the pagetables for our kernel direct
* mapped region.
*/
+ mov r3, pc
+ mov r3, r3, lsr #20
+ orr r3, r7, r3, lsl #20
add r0, r4, #(KERNEL_START & 0xff000000) >> 18
str r3, [r0, #(KERNEL_START & 0x00f00000) >> 18]!
ldr r6, =(KERNEL_END - 1)
@@ -289,24 +208,35 @@ __create_page_tables:
str r6, [r0]
#ifdef CONFIG_DEBUG_LL
- ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
+#ifndef CONFIG_DEBUG_ICEDCC
/*
* Map in IO space for serial debugging.
* This allows debug messages to be output
* via a serial console before paging_init.
*/
- ldr r3, [r8, #MACHINFO_PGOFFIO]
+ addruart r7, r3
+
+ mov r3, r3, lsr #20
+ mov r3, r3, lsl #2
+
add r0, r4, r3
rsb r3, r3, #0x4000 @ PTRS_PER_PGD*sizeof(long)
cmp r3, #0x0800 @ limit to 512MB
movhi r3, #0x0800
add r6, r0, r3
- ldr r3, [r8, #MACHINFO_PHYSIO]
- orr r3, r3, r7
+ mov r3, r7, lsr #20
+ ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
+ orr r3, r7, r3, lsl #20
1: str r3, [r0], #4
add r3, r3, #1 << 20
teq r0, r6
bne 1b
+
+#else /* CONFIG_DEBUG_ICEDCC */
+ /* we don't need any serial debugging mappings for ICEDCC */
+ ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
+#endif /* !CONFIG_DEBUG_ICEDCC */
+
#if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS)
/*
* If we're using the NetWinder or CATS, we also need to map
@@ -332,5 +262,168 @@ __create_page_tables:
mov pc, lr
ENDPROC(__create_page_tables)
.ltorg
+__enable_mmu_loc:
+ .long .
+ .long __enable_mmu
+ .long __enable_mmu_end
+
+#if defined(CONFIG_SMP)
+ __CPUINIT
+ENTRY(secondary_startup)
+ /*
+ * Common entry point for secondary CPUs.
+ *
+ * Ensure that we're in SVC mode, and IRQs are disabled. Lookup
+ * the processor type - there is no need to check the machine type
+ * as it has already been validated by the primary processor.
+ */
+ setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
+ mrc p15, 0, r9, c0, c0 @ get processor id
+ bl __lookup_processor_type
+ movs r10, r5 @ invalid processor?
+ moveq r0, #'p' @ yes, error 'p'
+ beq __error_p
+
+ /*
+ * Use the page tables supplied from __cpu_up.
+ */
+ adr r4, __secondary_data
+ ldmia r4, {r5, r7, r12} @ address to jump to after
+ sub r4, r4, r5 @ mmu has been enabled
+ ldr r4, [r7, r4] @ get secondary_data.pgdir
+ adr lr, BSYM(__enable_mmu) @ return address
+ mov r13, r12 @ __secondary_switched address
+ ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor
+ @ (return control reg)
+ THUMB( add r12, r10, #PROCINFO_INITFUNC )
+ THUMB( mov pc, r12 )
+ENDPROC(secondary_startup)
+
+ /*
+ * r6 = &secondary_data
+ */
+ENTRY(__secondary_switched)
+ ldr sp, [r7, #4] @ get secondary_data.stack
+ mov fp, #0
+ b secondary_start_kernel
+ENDPROC(__secondary_switched)
+
+ .type __secondary_data, %object
+__secondary_data:
+ .long .
+ .long secondary_data
+ .long __secondary_switched
+#endif /* defined(CONFIG_SMP) */
+
+
+
+/*
+ * Setup common bits before finally enabling the MMU. Essentially
+ * this is just loading the page table pointer and domain access
+ * registers.
+ *
+ * r0 = cp#15 control register
+ * r1 = machine ID
+ * r2 = atags pointer
+ * r4 = page table pointer
+ * r9 = processor ID
+ * r13 = *virtual* address to jump to upon completion
+ */
+__enable_mmu:
+#ifdef CONFIG_ALIGNMENT_TRAP
+ orr r0, r0, #CR_A
+#else
+ bic r0, r0, #CR_A
+#endif
+#ifdef CONFIG_CPU_DCACHE_DISABLE
+ bic r0, r0, #CR_C
+#endif
+#ifdef CONFIG_CPU_BPREDICT_DISABLE
+ bic r0, r0, #CR_Z
+#endif
+#ifdef CONFIG_CPU_ICACHE_DISABLE
+ bic r0, r0, #CR_I
+#endif
+ mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
+ domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
+ domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
+ domain_val(DOMAIN_IO, DOMAIN_CLIENT))
+ mcr p15, 0, r5, c3, c0, 0 @ load domain access register
+ mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
+ b __turn_mmu_on
+ENDPROC(__enable_mmu)
+
+/*
+ * Enable the MMU. This completely changes the structure of the visible
+ * memory space. You will not be able to trace execution through this.
+ * If you have an enquiry about this, *please* check the linux-arm-kernel
+ * mailing list archives BEFORE sending another post to the list.
+ *
+ * r0 = cp#15 control register
+ * r1 = machine ID
+ * r2 = atags pointer
+ * r9 = processor ID
+ * r13 = *virtual* address to jump to upon completion
+ *
+ * other registers depend on the function called upon completion
+ */
+ .align 5
+__turn_mmu_on:
+ mov r0, r0
+ mcr p15, 0, r0, c1, c0, 0 @ write control reg
+ mrc p15, 0, r3, c0, c0, 0 @ read id reg
+ mov r3, r3
+ mov r3, r13
+ mov pc, r3
+__enable_mmu_end:
+ENDPROC(__turn_mmu_on)
+
+
+#ifdef CONFIG_SMP_ON_UP
+__fixup_smp:
+ mov r7, #0x00070000
+ orr r6, r7, #0xff000000 @ mask 0xff070000
+ orr r7, r7, #0x41000000 @ val 0x41070000
+ and r0, r9, r6
+ teq r0, r7 @ ARM CPU and ARMv6/v7?
+ bne __fixup_smp_on_up @ no, assume UP
+
+ orr r6, r6, #0x0000ff00
+ orr r6, r6, #0x000000f0 @ mask 0xff07fff0
+ orr r7, r7, #0x0000b000
+ orr r7, r7, #0x00000020 @ val 0x4107b020
+ and r0, r9, r6
+ teq r0, r7 @ ARM 11MPCore?
+ moveq pc, lr @ yes, assume SMP
+
+ mrc p15, 0, r0, c0, c0, 5 @ read MPIDR
+ tst r0, #1 << 31
+ movne pc, lr @ bit 31 => SMP
+
+__fixup_smp_on_up:
+ adr r0, 1f
+ ldmia r0, {r3, r6, r7}
+ sub r3, r0, r3
+ add r6, r6, r3
+ add r7, r7, r3
+2: cmp r6, r7
+ ldmia r6!, {r0, r4}
+ strlo r4, [r0, r3]
+ blo 2b
+ mov pc, lr
+ENDPROC(__fixup_smp)
+
+1: .word .
+ .word __smpalt_begin
+ .word __smpalt_end
+
+ .pushsection .data
+ .globl smp_on_up
+smp_on_up:
+ ALT_SMP(.long 1)
+ ALT_UP(.long 0)
+ .popsection
+
+#endif
#include "head-common.S"