diff options
Diffstat (limited to 'arch/arm/mach-nomadik/cpu-8815.c')
| -rw-r--r-- | arch/arm/mach-nomadik/cpu-8815.c | 78 |
1 files changed, 77 insertions, 1 deletions
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 351404673f6c..7c8e3487f4eb 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -25,13 +25,19 @@ #include <linux/slab.h> #include <linux/irq.h> #include <linux/dma-mapping.h> -#include <linux/irqchip/arm-vic.h> +#include <linux/irqchip.h> #include <linux/platform_data/clk-nomadik.h> #include <linux/platform_data/pinctrl-nomadik.h> +#include <linux/platform_data/clocksource-nomadik-mtu.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> #include <mach/hardware.h> #include <mach/irqs.h> +#include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/mach/time.h> #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> @@ -160,3 +166,73 @@ void cpu8815_restart(char mode, const char *cmd) /* Write anything to Reset status register */ writel(1, src_rstsr); } + +#ifdef CONFIG_OF + +/* Initial value for SRC control register: all timers use MXTAL/8 source */ +#define SRC_CR_INIT_MASK 0x00007fff +#define SRC_CR_INIT_VAL 0x2aaa8000 + +static void __init cpu8815_timer_init_of(void) +{ + struct device_node *mtu; + void __iomem *base; + int irq; + u32 src_cr; + + /* We need this to be up now */ + nomadik_clk_init(); + + mtu = of_find_node_by_path("/mtu0"); + if (!mtu) + return; + base = of_iomap(mtu, 0); + if (WARN_ON(!base)) + return; + irq = irq_of_parse_and_map(mtu, 0); + + pr_info("Remapped MTU @ %p, irq: %d\n", base, irq); + + /* Configure timer sources in "system reset controller" ctrl reg */ + src_cr = readl(base); + src_cr &= SRC_CR_INIT_MASK; + src_cr |= SRC_CR_INIT_VAL; + writel(src_cr, base); + + nmdk_timer_init(base, irq); +} + +/* These are mostly to get the right device names for the clock lookups */ +static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART0_BASE, + "uart0", NULL), + OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART1_BASE, + "uart1", NULL), + { /* sentinel */ }, +}; + +static void __init cpu8815_init_of(void) +{ +#ifdef CONFIG_CACHE_L2X0 + /* At full speed latency must be >=2, so 0x249 in low bits */ + l2x0_of_init(0x00730249, 0xfe000fff); +#endif + of_platform_populate(NULL, of_default_bus_match_table, + cpu8815_auxdata_lookup, NULL); +} + +static const char * cpu8815_board_compat[] = { + "calaosystems,usb-s8815", + NULL, +}; + +DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815") + .map_io = cpu8815_map_io, + .init_irq = irqchip_init, + .init_time = cpu8815_timer_init_of, + .init_machine = cpu8815_init_of, + .restart = cpu8815_restart, + .dt_compat = cpu8815_board_compat, +MACHINE_END + +#endif |