summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/pm34xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/pm34xx.c')
-rw-r--r--arch/arm/mach-omap2/pm34xx.c51
1 files changed, 28 insertions, 23 deletions
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 81ed252a0f8a..910a7acf542d 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -26,6 +26,7 @@
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/clk.h>
+#include <linux/delay.h>
#include <plat/sram.h>
#include <plat/clockdomain.h>
@@ -124,9 +125,17 @@ static void omap3_core_save_context(void)
control_padconf_off |= START_PADCONF_SAVE;
omap_ctrl_writel(control_padconf_off, OMAP343X_CONTROL_PADCONF_OFF);
/* wait for the save to complete */
- while (!omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
- & PADCONF_SAVE_DONE)
- ;
+ while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
+ & PADCONF_SAVE_DONE))
+ udelay(1);
+
+ /*
+ * Force write last pad into memory, as this can fail in some
+ * cases according to erratas 1.157, 1.185
+ */
+ omap_ctrl_writel(omap_ctrl_readl(OMAP343X_PADCONF_ETK_D14),
+ OMAP343X_CONTROL_MEM_WKUP + 0x2a0);
+
/* Save the Interrupt controller context */
omap_intc_save_context();
/* Save the GPMC context */
@@ -392,6 +401,7 @@ void omap_sram_idle(void)
prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
omap3_enable_io_chain();
}
+ omap3_intc_prepare_idle();
/*
* On EMU/HS devices ROM code restores a SRDC value
@@ -438,6 +448,7 @@ void omap_sram_idle(void)
OMAP3430_GR_MOD,
OMAP3_PRM_VOLTCTRL_OFFSET);
}
+ omap3_intc_resume_idle();
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
@@ -578,6 +589,8 @@ static int omap3_pm_suspend(void)
}
omap_uart_prepare_suspend();
+ omap3_intc_suspend();
+
omap_sram_idle();
restore:
@@ -835,6 +848,8 @@ static void __init prcm_setup_regs(void)
CM_AUTOIDLE);
}
+ omap_ctrl_writel(OMAP3430_AUTOIDLE, OMAP2_CONTROL_SYSCONFIG);
+
/*
* Set all plls to autoidle. This is needed until autoidle is
* enabled by clockfw
@@ -875,15 +890,23 @@ static void __init prcm_setup_regs(void)
prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+ /* Enable PM_WKEN to support DSS LPR */
+ prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS,
+ OMAP3430_DSS_MOD, PM_WKEN);
+
/* Enable wakeups in PER */
prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
- OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3,
+ OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3 |
+ OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
+ OMAP3430_EN_MCBSP4,
OMAP3430_PER_MOD, PM_WKEN);
/* and allow them to wake up MPU */
prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
- OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3,
+ OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3 |
+ OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
+ OMAP3430_EN_MCBSP4,
OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
/* Don't attach IVA interrupts */
@@ -904,24 +927,6 @@ static void __init prcm_setup_regs(void)
/* Clear any pending PRCM interrupts */
prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
- /* Don't attach IVA interrupts */
- prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
- prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
- prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
- prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
-
- /* Clear any pending 'reset' flags */
- prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
-
- /* Clear any pending PRCM interrupts */
- prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
-
omap3_iva_idle();
omap3_d2d_idle();
}