diff options
Diffstat (limited to 'arch/arm/mach-omap2')
23 files changed, 502 insertions, 79 deletions
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 8ca14e88a31a..2c5d0ed75285 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -83,11 +83,9 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data tusb_data = { -#if defined(CONFIG_USB_MUSB_OTG) +#ifdef CONFIG_USB_GADGET_MUSB_HDRC .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_PERIPHERAL) - .mode = MUSB_PERIPHERAL, -#else /* defined(CONFIG_USB_MUSB_HOST) */ +#else .mode = MUSB_HOST, #endif .set_power = tusb_set_power, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 79c6909eeb78..580fd17208da 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -81,13 +81,13 @@ static u8 omap3_beagle_version; static struct { int mmc1_gpio_wp; int usb_pwr_level; - int reset_gpio; + int dvi_pd_gpio; int usr_button_gpio; int mmc_caps; } beagle_config = { .mmc1_gpio_wp = -EINVAL, .usb_pwr_level = GPIOF_OUT_INIT_LOW, - .reset_gpio = 129, + .dvi_pd_gpio = -EINVAL, .usr_button_gpio = 4, .mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, }; @@ -126,21 +126,21 @@ static void __init omap3_beagle_init_rev(void) printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX; beagle_config.mmc1_gpio_wp = 29; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 6: printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3; beagle_config.mmc1_gpio_wp = 23; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 5: printk(KERN_INFO "OMAP3 Beagle Rev: C4\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C4; beagle_config.mmc1_gpio_wp = 23; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 0: @@ -274,11 +274,9 @@ static int beagle_twl_gpio_setup(struct device *dev, if (r) pr_err("%s: unable to configure nDVI_PWR_EN\n", __func__); - r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH, - "DVI_LDO_EN"); - if (r) - pr_err("%s: unable to configure DVI_LDO_EN\n", - __func__); + + beagle_config.dvi_pd_gpio = gpio + 2; + } else { /* * REVISIT: need ehci-omap hooks for external VBUS @@ -287,7 +285,7 @@ static int beagle_twl_gpio_setup(struct device *dev, if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) pr_err("%s: unable to configure EHCI_nOC\n", __func__); } - dvi_panel.power_down_gpio = beagle_config.reset_gpio; + dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio; gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, "nEN_USB_PWR"); @@ -499,7 +497,7 @@ static void __init omap3_beagle_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_init_rev(); - if (beagle_config.mmc1_gpio_wp != -EINVAL) + if (gpio_is_valid(beagle_config.mmc1_gpio_wp)) omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); mmc[0].caps = beagle_config.mmc_caps; omap_hsmmc_init(mmc); @@ -510,15 +508,13 @@ static void __init omap3_beagle_init(void) platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); + if (gpio_is_valid(beagle_config.dvi_pd_gpio)) + omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT); omap_display_init(&beagle_dss_data); omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); - omap_mux_init_gpio(170, OMAP_PIN_INPUT); - /* REVISIT leave DVI powered down until it's needed ... */ - gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD"); - usb_musb_init(NULL); usbhs_init(&usbhs_bdata); omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index ff53deccecab..df2534de3361 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -144,7 +144,6 @@ static struct lis3lv02d_platform_data rx51_lis3lv02d_data = { .release_resources = lis302_release, .st_min_limits = {-32, 3, 3}, .st_max_limits = {-3, 32, 32}, - .irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO), }; #endif @@ -1030,7 +1029,6 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = { { I2C_BOARD_INFO("lis3lv02d", 0x1d), .platform_data = &rx51_lis3lv02d_data, - .irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO), }, #endif }; @@ -1056,6 +1054,10 @@ static int __init rx51_i2c_init(void) omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); +#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) + rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO); + rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO); +#endif omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3, ARRAY_SIZE(rx51_peripherals_i2c_board_info_3)); return 0; diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 4e1a3b0e8cc8..1efdec236ae8 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3514,7 +3514,7 @@ int __init omap3xxx_clk_init(void) struct omap_clk *c; u32 cpu_clkflg = 0; - if (cpu_is_omap3517()) { + if (soc_is_am35xx()) { cpu_mask = RATE_IN_34XX; cpu_clkflg = CK_AM35XX; } else if (cpu_is_omap3630()) { diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 2172f6603848..e2b701e164f6 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -84,6 +84,7 @@ static struct clk slimbus_clk = { static struct clk sys_32k_ck = { .name = "sys_32k_ck", + .clkdm_name = "prm_clkdm", .rate = 32768, .ops = &clkops_null, }; @@ -512,6 +513,7 @@ static struct clk ddrphy_ck = { .name = "ddrphy_ck", .parent = &dpll_core_m2_ck, .ops = &clkops_null, + .clkdm_name = "l3_emif_clkdm", .fixed_div = 2, .recalc = &omap_fixed_divisor_recalc, }; @@ -769,6 +771,7 @@ static const struct clksel dpll_mpu_m2_div[] = { static struct clk dpll_mpu_m2_ck = { .name = "dpll_mpu_m2_ck", .parent = &dpll_mpu_ck, + .clkdm_name = "cm_clkdm", .clksel = dpll_mpu_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, @@ -1149,6 +1152,7 @@ static const struct clksel l3_div_div[] = { static struct clk l3_div_ck = { .name = "l3_div_ck", .parent = &div_core_ck, + .clkdm_name = "cm_clkdm", .clksel = l3_div_div, .clksel_reg = OMAP4430_CM_CLKSEL_CORE, .clksel_mask = OMAP4430_CLKSEL_L3_MASK, @@ -2824,6 +2828,7 @@ static const struct clksel trace_clk_div_div[] = { static struct clk trace_clk_div_ck = { .name = "trace_clk_div_ck", .parent = &pmd_trace_clk_mux_ck, + .clkdm_name = "emu_sys_clkdm", .clksel = trace_clk_div_div, .clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL, .clksel_mask = OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK, diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index a7bc096bd407..f24e3f7a2bbc 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -22,4 +22,15 @@ */ #define MAX_MODULE_READY_TIME 2000 +/* + * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for + * the PRCM to request that a module enter the inactive state in the + * case of OMAP2 & 3. In the case of OMAP4 this is the max duration + * in microseconds for the module to reach the inactive state from + * a functional state. + * XXX FSUSB on OMAP4430 takes ~4ms to idle after reset during + * kernel init. + */ +#define MAX_MODULE_DISABLE_TIME 5000 + #endif diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index 8c86d294b1a3..1a39945d9ff8 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -313,9 +313,9 @@ int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_off omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) == CLKCTRL_IDLEST_DISABLED), - MAX_MODULE_READY_TIME, i); + MAX_MODULE_DISABLE_TIME, i); - return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; + return (i < MAX_MODULE_DISABLE_TIME) ? 0 : -EBUSY; } /** diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index db5a88a36c63..5fb47a14f4ba 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -180,16 +180,133 @@ static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask) omap4_dsi_mux_pads(dsi_id, 0); } +static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput) +{ + return omap_pm_set_min_bus_tput(dev, OCP_INITIATOR_AGENT, tput); +} + +static struct platform_device *create_dss_pdev(const char *pdev_name, + int pdev_id, const char *oh_name, void *pdata, int pdata_len, + struct platform_device *parent) +{ + struct platform_device *pdev; + struct omap_device *od; + struct omap_hwmod *ohs[1]; + struct omap_hwmod *oh; + int r; + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up %s\n", oh_name); + r = -ENODEV; + goto err; + } + + pdev = platform_device_alloc(pdev_name, pdev_id); + if (!pdev) { + pr_err("Could not create pdev for %s\n", pdev_name); + r = -ENOMEM; + goto err; + } + + if (parent != NULL) + pdev->dev.parent = &parent->dev; + + if (pdev->id != -1) + dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); + else + dev_set_name(&pdev->dev, "%s", pdev->name); + + ohs[0] = oh; + od = omap_device_alloc(pdev, ohs, 1, NULL, 0); + if (!od) { + pr_err("Could not alloc omap_device for %s\n", pdev_name); + r = -ENOMEM; + goto err; + } + + r = platform_device_add_data(pdev, pdata, pdata_len); + if (r) { + pr_err("Could not set pdata for %s\n", pdev_name); + goto err; + } + + r = omap_device_register(pdev); + if (r) { + pr_err("Could not register omap_device for %s\n", pdev_name); + goto err; + } + + return pdev; + +err: + return ERR_PTR(r); +} + +static struct platform_device *create_simple_dss_pdev(const char *pdev_name, + int pdev_id, void *pdata, int pdata_len, + struct platform_device *parent) +{ + struct platform_device *pdev; + int r; + + pdev = platform_device_alloc(pdev_name, pdev_id); + if (!pdev) { + pr_err("Could not create pdev for %s\n", pdev_name); + r = -ENOMEM; + goto err; + } + + if (parent != NULL) + pdev->dev.parent = &parent->dev; + + if (pdev->id != -1) + dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); + else + dev_set_name(&pdev->dev, "%s", pdev->name); + + r = platform_device_add_data(pdev, pdata, pdata_len); + if (r) { + pr_err("Could not set pdata for %s\n", pdev_name); + goto err; + } + + r = platform_device_add(pdev); + if (r) { + pr_err("Could not register platform_device for %s\n", pdev_name); + goto err; + } + + return pdev; + +err: + return ERR_PTR(r); +} + int __init omap_display_init(struct omap_dss_board_info *board_data) { int r = 0; - struct omap_hwmod *oh; struct platform_device *pdev; int i, oh_count; - struct omap_display_platform_data pdata; const struct omap_dss_hwmod_data *curr_dss_hwmod; + struct platform_device *dss_pdev; + + /* create omapdss device */ + + board_data->dsi_enable_pads = omap_dsi_enable_pads; + board_data->dsi_disable_pads = omap_dsi_disable_pads; + board_data->get_context_loss_count = omap_pm_get_dev_context_loss_count; + board_data->set_min_bus_tput = omap_dss_set_min_bus_tput; + + omap_display_device.dev.platform_data = board_data; + + r = platform_device_register(&omap_display_device); + if (r < 0) { + pr_err("Unable to register omapdss device\n"); + return r; + } - memset(&pdata, 0, sizeof(pdata)); + /* create devices for dss hwmods */ if (cpu_is_omap24xx()) { curr_dss_hwmod = omap2_dss_hwmod_data; @@ -202,39 +319,58 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) oh_count = ARRAY_SIZE(omap4_dss_hwmod_data); } - if (board_data->dsi_enable_pads == NULL) - board_data->dsi_enable_pads = omap_dsi_enable_pads; - if (board_data->dsi_disable_pads == NULL) - board_data->dsi_disable_pads = omap_dsi_disable_pads; - - pdata.board_data = board_data; - pdata.board_data->get_context_loss_count = - omap_pm_get_dev_context_loss_count; - - for (i = 0; i < oh_count; i++) { - oh = omap_hwmod_lookup(curr_dss_hwmod[i].oh_name); - if (!oh) { - pr_err("Could not look up %s\n", - curr_dss_hwmod[i].oh_name); - return -ENODEV; + /* + * First create the pdev for dss_core, which is used as a parent device + * by the other dss pdevs. Note: dss_core has to be the first item in + * the hwmod list. + */ + dss_pdev = create_dss_pdev(curr_dss_hwmod[0].dev_name, + curr_dss_hwmod[0].id, + curr_dss_hwmod[0].oh_name, + board_data, sizeof(*board_data), + NULL); + + if (IS_ERR(dss_pdev)) { + pr_err("Could not build omap_device for %s\n", + curr_dss_hwmod[0].oh_name); + + return PTR_ERR(dss_pdev); + } + + for (i = 1; i < oh_count; i++) { + pdev = create_dss_pdev(curr_dss_hwmod[i].dev_name, + curr_dss_hwmod[i].id, + curr_dss_hwmod[i].oh_name, + board_data, sizeof(*board_data), + dss_pdev); + + if (IS_ERR(pdev)) { + pr_err("Could not build omap_device for %s\n", + curr_dss_hwmod[i].oh_name); + + return PTR_ERR(pdev); } + } - pdev = omap_device_build(curr_dss_hwmod[i].dev_name, - curr_dss_hwmod[i].id, oh, &pdata, - sizeof(struct omap_display_platform_data), - NULL, 0, 0); + /* Create devices for DPI and SDI */ - if (WARN((IS_ERR(pdev)), "Could not build omap_device for %s\n", - curr_dss_hwmod[i].oh_name)) - return -ENODEV; + pdev = create_simple_dss_pdev("omapdss_dpi", -1, + board_data, sizeof(*board_data), dss_pdev); + if (IS_ERR(pdev)) { + pr_err("Could not build platform_device for omapdss_dpi\n"); + return PTR_ERR(pdev); } - omap_display_device.dev.platform_data = board_data; - r = platform_device_register(&omap_display_device); - if (r < 0) - printk(KERN_ERR "Unable to register OMAP-Display device\n"); + if (cpu_is_omap34xx()) { + pdev = create_simple_dss_pdev("omapdss_sdi", -1, + board_data, sizeof(*board_data), dss_pdev); + if (IS_ERR(pdev)) { + pr_err("Could not build platform_device for omapdss_sdi\n"); + return PTR_ERR(pdev); + } + } - return r; + return 0; } static void dispc_disable_outputs(void) diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index 845309f146fe..88ffa1e645cd 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -20,6 +20,9 @@ #include <linux/module.h> #include <linux/platform_device.h> + +#include <asm/memblock.h> + #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" #ifdef CONFIG_BRIDGE_DVFS diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 46b09dae770e..2286410671e7 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -49,6 +49,7 @@ #define GPMC_ECC_CONTROL 0x1f8 #define GPMC_ECC_SIZE_CONFIG 0x1fc #define GPMC_ECC1_RESULT 0x200 +#define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */ /* GPMC ECC control settings */ #define GPMC_ECC_CTRL_ECCCLEAR 0x100 @@ -935,3 +936,186 @@ int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code) return 0; } EXPORT_SYMBOL_GPL(gpmc_calculate_ecc); + +#ifdef CONFIG_ARCH_OMAP3 + +/** + * gpmc_init_hwecc_bch - initialize hardware BCH ecc functionality + * @cs: chip select number + * @nsectors: how many 512-byte sectors to process + * @nerrors: how many errors to correct per sector (4 or 8) + * + * This function must be executed before any call to gpmc_enable_hwecc_bch. + */ +int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors) +{ + /* check if ecc module is in use */ + if (gpmc_ecc_used != -EINVAL) + return -EINVAL; + + /* support only OMAP3 class */ + if (!cpu_is_omap34xx()) { + printk(KERN_ERR "BCH ecc is not supported on this CPU\n"); + return -EINVAL; + } + + /* + * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1. + * Other chips may be added if confirmed to work. + */ + if ((nerrors == 4) && + (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) { + printk(KERN_ERR "BCH 4-bit mode is not supported on this CPU\n"); + return -EINVAL; + } + + /* sanity check */ + if (nsectors > 8) { + printk(KERN_ERR "BCH cannot process %d sectors (max is 8)\n", + nsectors); + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL_GPL(gpmc_init_hwecc_bch); + +/** + * gpmc_enable_hwecc_bch - enable hardware BCH ecc functionality + * @cs: chip select number + * @mode: read/write mode + * @dev_width: device bus width(1 for x16, 0 for x8) + * @nsectors: how many 512-byte sectors to process + * @nerrors: how many errors to correct per sector (4 or 8) + */ +int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors, + int nerrors) +{ + unsigned int val; + + /* check if ecc module is in use */ + if (gpmc_ecc_used != -EINVAL) + return -EINVAL; + + gpmc_ecc_used = cs; + + /* clear ecc and enable bits */ + gpmc_write_reg(GPMC_ECC_CONTROL, 0x1); + + /* + * When using BCH, sector size is hardcoded to 512 bytes. + * Here we are using wrapping mode 6 both for reading and writing, with: + * size0 = 0 (no additional protected byte in spare area) + * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area) + */ + gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, (32 << 22) | (0 << 12)); + + /* BCH configuration */ + val = ((1 << 16) | /* enable BCH */ + (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */ + (0x06 << 8) | /* wrap mode = 6 */ + (dev_width << 7) | /* bus width */ + (((nsectors-1) & 0x7) << 4) | /* number of sectors */ + (cs << 1) | /* ECC CS */ + (0x1)); /* enable ECC */ + + gpmc_write_reg(GPMC_ECC_CONFIG, val); + gpmc_write_reg(GPMC_ECC_CONTROL, 0x101); + return 0; +} +EXPORT_SYMBOL_GPL(gpmc_enable_hwecc_bch); + +/** + * gpmc_calculate_ecc_bch4 - Generate 7 ecc bytes per sector of 512 data bytes + * @cs: chip select number + * @dat: The pointer to data on which ecc is computed + * @ecc: The ecc output buffer + */ +int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc) +{ + int i; + unsigned long nsectors, reg, val1, val2; + + if (gpmc_ecc_used != cs) + return -EINVAL; + + nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1; + + for (i = 0; i < nsectors; i++) { + + reg = GPMC_ECC_BCH_RESULT_0 + 16*i; + + /* Read hw-computed remainder */ + val1 = gpmc_read_reg(reg + 0); + val2 = gpmc_read_reg(reg + 4); + + /* + * Add constant polynomial to remainder, in order to get an ecc + * sequence of 0xFFs for a buffer filled with 0xFFs; and + * left-justify the resulting polynomial. + */ + *ecc++ = 0x28 ^ ((val2 >> 12) & 0xFF); + *ecc++ = 0x13 ^ ((val2 >> 4) & 0xFF); + *ecc++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF)); + *ecc++ = 0x39 ^ ((val1 >> 20) & 0xFF); + *ecc++ = 0x96 ^ ((val1 >> 12) & 0xFF); + *ecc++ = 0xac ^ ((val1 >> 4) & 0xFF); + *ecc++ = 0x7f ^ ((val1 & 0xF) << 4); + } + + gpmc_ecc_used = -EINVAL; + return 0; +} +EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch4); + +/** + * gpmc_calculate_ecc_bch8 - Generate 13 ecc bytes per block of 512 data bytes + * @cs: chip select number + * @dat: The pointer to data on which ecc is computed + * @ecc: The ecc output buffer + */ +int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc) +{ + int i; + unsigned long nsectors, reg, val1, val2, val3, val4; + + if (gpmc_ecc_used != cs) + return -EINVAL; + + nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1; + + for (i = 0; i < nsectors; i++) { + + reg = GPMC_ECC_BCH_RESULT_0 + 16*i; + + /* Read hw-computed remainder */ + val1 = gpmc_read_reg(reg + 0); + val2 = gpmc_read_reg(reg + 4); + val3 = gpmc_read_reg(reg + 8); + val4 = gpmc_read_reg(reg + 12); + + /* + * Add constant polynomial to remainder, in order to get an ecc + * sequence of 0xFFs for a buffer filled with 0xFFs. + */ + *ecc++ = 0xef ^ (val4 & 0xFF); + *ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF); + *ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF); + *ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF); + *ecc++ = 0xed ^ (val3 & 0xFF); + *ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF); + *ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF); + *ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF); + *ecc++ = 0x97 ^ (val2 & 0xFF); + *ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF); + *ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF); + *ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF); + *ecc++ = 0xb5 ^ (val1 & 0xFF); + } + + gpmc_ecc_used = -EINVAL; + return 0; +} +EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch8); + +#endif /* CONFIG_ARCH_OMAP3 */ diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 0389b3264abe..00486a8564fd 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -247,6 +247,17 @@ void __init omap3xxx_check_features(void) omap_features |= OMAP3_HAS_SDRC; /* + * am35x fixups: + * - The am35x Chip ID register has bits 12, 7:5, and 3:2 marked as + * reserved and therefore return 0 when read. Unfortunately, + * OMAP3_CHECK_FEATURE() will interpret some of those zeroes to + * mean that a feature is present even though it isn't so clear + * the incorrectly set feature bits. + */ + if (soc_is_am35xx()) + omap_features &= ~(OMAP3_HAS_IVA | OMAP3_HAS_ISP); + + /* * TODO: Get additional info (where applicable) * e.g. Size of L2 cache. */ diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index fdc4303be563..6038a8c84b74 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -149,6 +149,7 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) ct->chip.irq_ack = omap_mask_ack_irq; ct->chip.irq_mask = irq_gc_mask_disable_reg; ct->chip.irq_unmask = irq_gc_unmask_enable_reg; + ct->chip.flags |= IRQCHIP_SKIP_SET_WAKE; ct->regs.enable = INTC_MIR_CLEAR0; ct->regs.disable = INTC_MIR_SET0; diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 80e55c5c9998..9fe6829f4c16 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -41,6 +41,7 @@ #include "control.h" #include "mux.h" #include "prm.h" +#include "common.h" #define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */ #define OMAP_MUX_BASE_SZ 0x5ca @@ -217,8 +218,7 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, return -ENODEV; } -static int __init -omap_mux_get_by_name(const char *muxname, +int __init omap_mux_get_by_name(const char *muxname, struct omap_mux_partition **found_partition, struct omap_mux **found_mux) { diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 69fe060a0b75..471e62a74a16 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -59,6 +59,7 @@ #define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN #define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4) +#define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0) /* Flags for omapX_mux_init */ #define OMAP_PACKAGE_MASK 0xffff @@ -225,8 +226,18 @@ omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads); */ void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state); +int omap_mux_get_by_name(const char *muxname, + struct omap_mux_partition **found_partition, + struct omap_mux **found_mux); #else +static inline int omap_mux_get_by_name(const char *muxname, + struct omap_mux_partition **found_partition, + struct omap_mux **found_mux) +{ + return 0; +} + static inline int omap_mux_init_gpio(int gpio, int val) { return 0; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index bf86f7e8f91f..773193670ea2 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -530,7 +530,7 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v) if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) _set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v); if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP) - _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v); + _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v); /* XXX test pwrdm_get_wken for this hwmod's subsystem */ diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 950454a3fa31..f30e861ce6d9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -393,8 +393,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_counter_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0004, .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), + .idlemodes = (SIDLE_FORCE | SIDLE_NO), .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -854,6 +853,11 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { .name = "dss_hdmi", .class = &omap44xx_hdmi_hwmod_class, .clkdm_name = "l3_dss_clkdm", + /* + * HDMI audio requires to use no-idle mode. Hence, + * set idle mode by software. + */ + .flags = HWMOD_SWSUP_SIDLE, .mpu_irqs = omap44xx_dss_hdmi_irqs, .sdma_reqs = omap44xx_dss_hdmi_sdma_reqs, .main_clk = "dss_48mhz_clk", diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c index a05a62f9ee5b..acc216491b8a 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.c +++ b/arch/arm/mach-omap2/omap_l3_smx.c @@ -155,10 +155,11 @@ static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3, u8 multi = error & L3_ERROR_LOG_MULTI; u32 address = omap3_l3_decode_addr(error_addr); - WARN(true, "%s seen by %s %s at address %x\n", + pr_err("%s seen by %s %s at address %x\n", omap3_l3_code_string(code), omap3_l3_initiator_string(initid), multi ? "Multiple Errors" : "", address); + WARN_ON(1); return IRQ_HANDLED; } diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 4c90477e6f82..d52651a05daa 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -239,21 +239,15 @@ void am35x_set_mode(u8 musb_mode) devconf2 &= ~CONF2_OTGMODE; switch (musb_mode) { -#ifdef CONFIG_USB_MUSB_HDRC_HCD case MUSB_HOST: /* Force VBUS valid, ID = 0 */ devconf2 |= CONF2_FORCE_HOST; break; -#endif -#ifdef CONFIG_USB_GADGET_MUSB_HDRC case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */ devconf2 |= CONF2_FORCE_DEVICE; break; -#endif -#ifdef CONFIG_USB_MUSB_OTG case MUSB_OTG: /* Don't override the VBUS/ID comparators */ devconf2 |= CONF2_NO_OVERRIDE; break; -#endif default: pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode); } diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index a34023d0ca7c..3a595e899724 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -724,6 +724,7 @@ int __init omap3_pm_init(void) ret = request_irq(omap_prcm_event_to_irq("io"), _prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io", omap3_pm_init); + enable_irq(omap_prcm_event_to_irq("io")); if (ret) { pr_err("pm: Failed to request pm_io irq\n"); diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 9ce765407ad5..21cb74003a56 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -15,6 +15,7 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/irq.h> #include "common.h" #include <plat/cpu.h> @@ -303,8 +304,15 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask) static int __init omap3xxx_prcm_init(void) { - if (cpu_is_omap34xx()) - return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); - return 0; + int ret = 0; + + if (cpu_is_omap34xx()) { + ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); + if (!ret) + irq_set_status_flags(omap_prcm_event_to_irq("io"), + IRQ_NOAUTOEN); + } + + return ret; } subsys_initcall(omap3xxx_prcm_init); diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 292d4aaca068..c1b93c752d70 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -57,6 +57,7 @@ struct omap_uart_state { struct list_head node; struct omap_hwmod *oh; + struct omap_device_pad default_omap_uart_pads[2]; }; static LIST_HEAD(uart_list); @@ -126,11 +127,70 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX -static void omap_serial_fill_default_pads(struct omap_board_data *bdata) + +#define OMAP_UART_DEFAULT_PAD_NAME_LEN 28 +static char rx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN], + tx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN] __initdata; + +static void __init +omap_serial_fill_uart_tx_rx_pads(struct omap_board_data *bdata, + struct omap_uart_state *uart) +{ + uart->default_omap_uart_pads[0].name = rx_pad_name; + uart->default_omap_uart_pads[0].flags = OMAP_DEVICE_PAD_REMUX | + OMAP_DEVICE_PAD_WAKEUP; + uart->default_omap_uart_pads[0].enable = OMAP_PIN_INPUT | + OMAP_MUX_MODE0; + uart->default_omap_uart_pads[0].idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0; + uart->default_omap_uart_pads[1].name = tx_pad_name; + uart->default_omap_uart_pads[1].enable = OMAP_PIN_OUTPUT | + OMAP_MUX_MODE0; + bdata->pads = uart->default_omap_uart_pads; + bdata->pads_cnt = ARRAY_SIZE(uart->default_omap_uart_pads); +} + +static void __init omap_serial_check_wakeup(struct omap_board_data *bdata, + struct omap_uart_state *uart) { + struct omap_mux_partition *tx_partition = NULL, *rx_partition = NULL; + struct omap_mux *rx_mux = NULL, *tx_mux = NULL; + char *rx_fmt, *tx_fmt; + int uart_nr = bdata->id + 1; + + if (bdata->id != 2) { + rx_fmt = "uart%d_rx.uart%d_rx"; + tx_fmt = "uart%d_tx.uart%d_tx"; + } else { + rx_fmt = "uart%d_rx_irrx.uart%d_rx_irrx"; + tx_fmt = "uart%d_tx_irtx.uart%d_tx_irtx"; + } + + snprintf(rx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, rx_fmt, + uart_nr, uart_nr); + snprintf(tx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, tx_fmt, + uart_nr, uart_nr); + + if (omap_mux_get_by_name(rx_pad_name, &rx_partition, &rx_mux) >= 0 && + omap_mux_get_by_name + (tx_pad_name, &tx_partition, &tx_mux) >= 0) { + u16 tx_mode, rx_mode; + + tx_mode = omap_mux_read(tx_partition, tx_mux->reg_offset); + rx_mode = omap_mux_read(rx_partition, rx_mux->reg_offset); + + /* + * Check if uart is used in default tx/rx mode i.e. in mux mode0 + * if yes then configure rx pin for wake up capability + */ + if (OMAP_MODE_UART(rx_mode) && OMAP_MODE_UART(tx_mode)) + omap_serial_fill_uart_tx_rx_pads(bdata, uart); + } } #else -static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {} +static void __init omap_serial_check_wakeup(struct omap_board_data *bdata, + struct omap_uart_state *uart) +{ +} #endif static char *cmdline_find_option(char *str) @@ -287,8 +347,7 @@ void __init omap_serial_board_init(struct omap_uart_port_info *info) bdata.pads = NULL; bdata.pads_cnt = 0; - if (cpu_is_omap44xx() || cpu_is_omap34xx()) - omap_serial_fill_default_pads(&bdata); + omap_serial_check_wakeup(&bdata, uart); if (!info) omap_serial_init_port(&bdata, NULL); diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index b19d1b43c12e..c4a576856661 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -41,12 +41,10 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data musb_plat = { -#ifdef CONFIG_USB_MUSB_OTG +#ifdef CONFIG_USB_GADGET_MUSB_HDRC .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_HDRC_HCD) +#else .mode = MUSB_HOST, -#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) - .mode = MUSB_PERIPHERAL, #endif /* .clock is set dynamically */ .config = &musb_config, diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index db84a46ce7fd..805bea6edf17 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -300,7 +300,7 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, printk(error, 3, status); return status; } - tusb_resources[2].start = irq + IH_GPIO_BASE; + tusb_resources[2].start = gpio_to_irq(irq); /* set up memory timings ... can speed them up later */ if (!ps_refclk) { |