summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa/balloon3.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa/balloon3.c')
-rw-r--r--arch/arm/mach-pxa/balloon3.c732
1 files changed, 581 insertions, 151 deletions
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index f3b5ace815e5..9041340fee1d 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -22,9 +22,14 @@
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/ioport.h>
+#include <linux/ucb1400.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/types.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/physmap.h>
+#include <linux/regulator/max1586.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -51,6 +56,59 @@
#include "generic.h"
#include "devices.h"
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long balloon3_pin_config[] __initdata = {
+ /* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* Reset, configured as GPIO wakeup source */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+ /* LEDs */
+ GPIO9_GPIO, /* NAND activity LED */
+ GPIO10_GPIO, /* Heartbeat LED */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO113_AC97_nRESET,
+ GPIO95_GPIO,
+
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+
+ /* USB Host */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+
+ /* PC Card */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO79_PSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+};
+
+/******************************************************************************
+ * Compatibility: Parameter parsing
+ ******************************************************************************/
static unsigned long balloon3_irq_enabled;
static unsigned long balloon3_features_present =
@@ -73,6 +131,321 @@ int __init parse_balloon3_features(char *arg)
}
early_param("balloon3_features", parse_balloon3_features);
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition balloon3_nor_partitions[] = {
+ {
+ .name = "Flash",
+ .offset = 0x00000000,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct physmap_flash_data balloon3_flash_data[] = {
+ {
+ .width = 2, /* bankwidth in bytes */
+ .parts = balloon3_nor_partitions,
+ .nr_parts = ARRAY_SIZE(balloon3_nor_partitions)
+ }
+};
+
+static struct resource balloon3_flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device balloon3_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .resource = &balloon3_flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = balloon3_flash_data,
+ },
+};
+static void __init balloon3_nor_init(void)
+{
+ platform_device_register(&balloon3_flash);
+}
+#else
+static inline void balloon3_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+ defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static struct ucb1400_pdata vpac270_ucb1400_pdata = {
+ .irq = IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ),
+};
+
+
+static struct platform_device balloon3_ucb1400_device = {
+ .name = "ucb1400_core",
+ .id = -1,
+ .dev = {
+ .platform_data = &vpac270_ucb1400_pdata,
+ },
+};
+
+static void __init balloon3_ts_init(void)
+{
+ if (!balloon3_has(BALLOON3_FEATURE_AUDIO))
+ return;
+
+ pxa_set_ac97_info(NULL);
+ platform_device_register(&balloon3_ucb1400_device);
+}
+#else
+static inline void balloon3_ts_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info balloon3_lcd_modes[] = {
+ {
+ .pixclock = 38000,
+ .xres = 480,
+ .yres = 640,
+ .bpp = 16,
+ .hsync_len = 8,
+ .left_margin = 8,
+ .right_margin = 8,
+ .vsync_len = 2,
+ .upper_margin = 4,
+ .lower_margin = 5,
+ .sync = 0,
+ },
+};
+
+static struct pxafb_mach_info balloon3_lcd_screen = {
+ .modes = balloon3_lcd_modes,
+ .num_modes = ARRAY_SIZE(balloon3_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void balloon3_backlight_power(int on)
+{
+ gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
+}
+
+static void __init balloon3_lcd_init(void)
+{
+ int ret;
+
+ if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY))
+ return;
+
+ ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON");
+ if (ret) {
+ pr_err("Requesting BKL-ON GPIO failed!\n");
+ goto err;
+ }
+
+ ret = gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
+ if (ret) {
+ pr_err("Setting BKL-ON GPIO direction failed!\n");
+ goto err2;
+ }
+
+ balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
+ set_pxa_fb_info(&balloon3_lcd_screen);
+ return;
+
+err2:
+ gpio_free(BALLOON3_GPIO_RUN_BACKLIGHT);
+err:
+ return;
+}
+#else
+static inline void balloon3_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data balloon3_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
+ .detect_delay_ms = 200,
+};
+
+static void __init balloon3_mmc_init(void)
+{
+ pxa_set_mci_info(&balloon3_mci_platform_data);
+}
+#else
+static inline void balloon3_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Gadget
+ ******************************************************************************/
+#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+static void balloon3_udc_command(int cmd)
+{
+ if (cmd == PXA2XX_UDC_CMD_CONNECT)
+ UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
+ else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+ UP2OCR &= ~UP2OCR_DPPUE;
+}
+
+static int balloon3_udc_is_connected(void)
+{
+ return 1;
+}
+
+static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = {
+ .udc_command = balloon3_udc_command,
+ .udc_is_connected = balloon3_udc_is_connected,
+ .gpio_pullup = -1,
+};
+
+static void __init balloon3_udc_init(void)
+{
+ pxa_set_udc_info(&balloon3_udc_info);
+ platform_device_register(&balloon3_gpio_vbus);
+}
+#else
+static inline void balloon3_udc_init(void) {}
+#endif
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
+static struct pxaficp_platform_data balloon3_ficp_platform_data = {
+ .transceiver_cap = IR_FIRMODE | IR_SIRMODE | IR_OFF,
+};
+
+static void __init balloon3_irda_init(void)
+{
+ pxa_set_ficp_info(&balloon3_ficp_platform_data);
+}
+#else
+static inline void balloon3_irda_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data balloon3_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init balloon3_uhc_init(void)
+{
+ if (!balloon3_has(BALLOON3_FEATURE_OHCI))
+ return;
+ pxa_set_ohci_info(&balloon3_ohci_info);
+}
+#else
+static inline void balloon3_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led balloon3_gpio_leds[] = {
+ {
+ .name = "balloon3:green:idle",
+ .default_trigger = "heartbeat",
+ .gpio = BALLOON3_GPIO_LED_IDLE,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:green:nand",
+ .default_trigger = "nand-disk",
+ .gpio = BALLOON3_GPIO_LED_NAND,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data balloon3_gpio_led_info = {
+ .leds = balloon3_gpio_leds,
+ .num_leds = ARRAY_SIZE(balloon3_gpio_leds),
+};
+
+static struct platform_device balloon3_leds = {
+ .name = "leds-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &balloon3_gpio_led_info,
+ }
+};
+
+struct gpio_led balloon3_pcf_gpio_leds[] = {
+ {
+ .name = "balloon3:green:led0",
+ .gpio = BALLOON3_PCF_GPIO_LED0,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:green:led1",
+ .gpio = BALLOON3_PCF_GPIO_LED1,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:orange:led2",
+ .gpio = BALLOON3_PCF_GPIO_LED2,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:orange:led3",
+ .gpio = BALLOON3_PCF_GPIO_LED3,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:orange:led4",
+ .gpio = BALLOON3_PCF_GPIO_LED4,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:orange:led5",
+ .gpio = BALLOON3_PCF_GPIO_LED5,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:red:led6",
+ .gpio = BALLOON3_PCF_GPIO_LED6,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:red:led7",
+ .gpio = BALLOON3_PCF_GPIO_LED7,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data balloon3_pcf_gpio_led_info = {
+ .leds = balloon3_pcf_gpio_leds,
+ .num_leds = ARRAY_SIZE(balloon3_pcf_gpio_leds),
+};
+
+static struct platform_device balloon3_pcf_leds = {
+ .name = "leds-gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &balloon3_pcf_gpio_led_info,
+ }
+};
+
+static void __init balloon3_leds_init(void)
+{
+ platform_device_register(&balloon3_leds);
+ platform_device_register(&balloon3_pcf_leds);
+}
+#else
+static inline void balloon3_leds_init(void) {}
+#endif
+
+/******************************************************************************
+ * FPGA IRQ
+ ******************************************************************************/
static void balloon3_mask_irq(unsigned int irq)
{
int balloon3_irq = (irq - BALLOON3_IRQ(0));
@@ -98,7 +471,6 @@ static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
balloon3_irq_enabled;
-
do {
/* clear useless edge notification */
if (desc->chip->ack)
@@ -132,201 +504,259 @@ static void __init balloon3_init_irq(void)
"enabled\n", __func__, BALLOON3_AUX_NIRQ);
}
-static unsigned long balloon3_ac97_pin_config[] = {
- GPIO28_AC97_BITCLK,
- GPIO29_AC97_SDATA_IN_0,
- GPIO30_AC97_SDATA_OUT,
- GPIO31_AC97_SYNC,
- GPIO113_AC97_nRESET,
-};
-
-static void balloon3_backlight_power(int on)
-{
- pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
- gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
-}
-
-static unsigned long balloon3_lcd_pin_config[] = {
- /* LCD - 16bpp Active TFT */
- GPIOxx_LCD_TFT_16BPP,
-
- GPIO99_GPIO, /* Backlight */
+/******************************************************************************
+ * GPIO expander
+ ******************************************************************************/
+#if defined(CONFIG_GPIO_PCF857X) || defined(CONFIG_GPIO_PCF857X_MODULE)
+static struct pcf857x_platform_data balloon3_pcf857x_pdata = {
+ .gpio_base = BALLOON3_PCF_GPIO_BASE,
+ .n_latch = 0,
+ .setup = NULL,
+ .teardown = NULL,
+ .context = NULL,
};
-static struct pxafb_mode_info balloon3_lcd_modes[] = {
+static struct i2c_board_info __initdata balloon3_i2c_devs[] = {
{
- .pixclock = 38000,
- .xres = 480,
- .yres = 640,
- .bpp = 16,
- .hsync_len = 8,
- .left_margin = 8,
- .right_margin = 8,
- .vsync_len = 2,
- .upper_margin = 4,
- .lower_margin = 5,
- .sync = 0,
+ I2C_BOARD_INFO("pcf8574a", 0x38),
+ .platform_data = &balloon3_pcf857x_pdata,
},
};
-static struct pxafb_mach_info balloon3_pxafb_info = {
- .modes = balloon3_lcd_modes,
- .num_modes = ARRAY_SIZE(balloon3_lcd_modes),
- .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
- .pxafb_backlight_power = balloon3_backlight_power,
-};
+static void __init balloon3_i2c_init(void)
+{
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(balloon3_i2c_devs));
+}
+#else
+static inline void balloon3_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * NAND
+ ******************************************************************************/
+#if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+static uint16_t balloon3_ctl =
+ BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
+ BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
+ BALLOON3_NAND_CONTROL_FLWP;
+
+static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
-static unsigned long balloon3_mmc_pin_config[] = {
- GPIO32_MMC_CLK,
- GPIO92_MMC_DAT_0,
- GPIO109_MMC_DAT_1,
- GPIO110_MMC_DAT_2,
- GPIO111_MMC_DAT_3,
- GPIO112_MMC_CMD,
-};
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if (ctrl & NAND_CLE)
+ balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCLE;
+ else
+ balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLCLE;
-static void balloon3_mci_setpower(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data *p_d = dev->platform_data;
-
- if ((1 << vdd) & p_d->ocr_mask) {
- pr_debug("%s: on\n", __func__);
- /* FIXME something to prod here? */
- } else {
- pr_debug("%s: off\n", __func__);
- /* FIXME something to prod here? */
+ if (ctrl & NAND_ALE)
+ balloon3_ctl |= BALLOON3_NAND_CONTROL_FLALE;
+ else
+ balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLALE;
+
+ __raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
}
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
-static struct pxamci_platform_data balloon3_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .setpower = balloon3_mci_setpower,
-};
+static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+ if (chip < 0 || chip > 3)
+ return;
-static int balloon3_udc_is_connected(void)
+ balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCE0 |
+ BALLOON3_NAND_CONTROL_FLCE1 |
+ BALLOON3_NAND_CONTROL_FLCE2 |
+ BALLOON3_NAND_CONTROL_FLCE3;
+
+ /* Deassert correct nCE line */
+ balloon3_ctl &= ~(BALLOON3_NAND_CONTROL_FLCE0 << chip);
+
+ __raw_writew(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+}
+
+static int balloon3_nand_probe(struct platform_device *pdev)
{
- pr_debug("%s: udc connected\n", __func__);
- return 1;
+ void __iomem *temp_map;
+ uint16_t ver;
+ int ret;
+
+ __raw_writew(BALLOON3_NAND_CONTROL2_16BIT, BALLOON3_NAND_CONTROL2_REG);
+
+ ver = __raw_readw(BALLOON3_FPGA_VER);
+ if (ver > 0x0201)
+ pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. "
+ "NAND support might be broken in this version!", ver);
+
+ /* Power up the NAND chips */
+ ret = gpio_request(BALLOON3_GPIO_RUN_NAND, "NAND");
+ if (ret)
+ goto err1;
+
+ ret = gpio_direction_output(BALLOON3_GPIO_RUN_NAND, 1);
+ if (ret)
+ goto err2;
+
+ gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1);
+
+ /* Deassert all nCE lines and write protect line */
+ __raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+ return 0;
+
+err2:
+ gpio_free(BALLOON3_GPIO_RUN_NAND);
+err1:
+ return ret;
}
-static void balloon3_udc_command(int cmd)
+static void balloon3_nand_remove(struct platform_device *pdev)
{
- switch (cmd) {
- case PXA2XX_UDC_CMD_CONNECT:
- UP2OCR |= (UP2OCR_DPPUE + UP2OCR_DPPUBE);
- pr_debug("%s: connect\n", __func__);
- break;
- case PXA2XX_UDC_CMD_DISCONNECT:
- UP2OCR &= ~UP2OCR_DPPUE;
- pr_debug("%s: disconnect\n", __func__);
- break;
- }
+ /* Power down the NAND chips */
+ gpio_set_value(BALLOON3_GPIO_RUN_NAND, 0);
+ gpio_free(BALLOON3_GPIO_RUN_NAND);
}
-static struct pxa2xx_udc_mach_info balloon3_udc_info = {
- .udc_is_connected = balloon3_udc_is_connected,
- .udc_command = balloon3_udc_command,
+static struct mtd_partition balloon3_partition_info[] = {
+ [0] = {
+ .name = "Boot",
+ .offset = 0,
+ .size = SZ_4M,
+ },
+ [1] = {
+ .name = "RootFS",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL
+ },
};
-static struct pxaficp_platform_data balloon3_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
-};
+static const char *balloon3_part_probes[] = { "cmdlinepart", NULL };
-static unsigned long balloon3_ohci_pin_config[] = {
- GPIO88_USBH1_PWR,
- GPIO89_USBH1_PEN,
+struct platform_nand_data balloon3_nand_pdata = {
+ .chip = {
+ .nr_chips = 4,
+ .chip_offset = 0,
+ .nr_partitions = ARRAY_SIZE(balloon3_partition_info),
+ .partitions = balloon3_partition_info,
+ .chip_delay = 50,
+ .part_probe_types = balloon3_part_probes,
+ },
+ .ctrl = {
+ .hwcontrol = 0,
+ .dev_ready = 0,
+ .select_chip = balloon3_nand_select_chip,
+ .cmd_ctrl = balloon3_nand_cmd_ctl,
+ .probe = balloon3_nand_probe,
+ .remove = balloon3_nand_remove,
+ },
};
-static struct pxaohci_platform_data balloon3_ohci_platform_data = {
- .port_mode = PMM_PERPORT_MODE,
- .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+static struct resource balloon3_nand_resource[] = {
+ [0] = {
+ .start = BALLOON3_NAND_BASE,
+ .end = BALLOON3_NAND_BASE + 0x4,
+ .flags = IORESOURCE_MEM,
+ },
};
-static unsigned long balloon3_pin_config[] __initdata = {
- /* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
- GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
- GPIO44_BTUART_CTS,
- GPIO45_BTUART_RTS,
-
- /* Wakeup GPIO */
- GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-
- /* NAND & IDLE LED GPIOs */
- GPIO9_GPIO,
- GPIO10_GPIO,
+static struct platform_device balloon3_nand = {
+ .name = "gen_nand",
+ .num_resources = ARRAY_SIZE(balloon3_nand_resource),
+ .resource = balloon3_nand_resource,
+ .id = -1,
+ .dev = {
+ .platform_data = &balloon3_nand_pdata,
+ }
};
-static struct gpio_led balloon3_gpio_leds[] = {
+static void __init balloon3_nand_init(void)
+{
+ platform_device_register(&balloon3_nand);
+}
+#else
+static inline void balloon3_nand_init(void) {}
+#endif
+
+/******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+ defined(CONFIG_REGULATOR_MAX1586_MODULE)
+static struct regulator_consumer_supply balloon3_max1587a_consumers[] = {
{
- .name = "balloon3:green:idle",
- .default_trigger = "heartbeat",
- .gpio = BALLOON3_GPIO_LED_IDLE,
- .active_low = 1,
+ .supply = "vcc_core",
+ }
+};
+
+static struct regulator_init_data balloon3_max1587a_v3_info = {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 900000,
+ .max_uV = 1705000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
},
+ .consumer_supplies = balloon3_max1587a_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(balloon3_max1587a_consumers),
+};
+
+static struct max1586_subdev_data balloon3_max1587a_subdevs[] = {
{
- .name = "balloon3:green:nand",
- .default_trigger = "nand-disk",
- .gpio = BALLOON3_GPIO_LED_NAND,
- .active_low = 1,
- },
+ .name = "vcc_core",
+ .id = MAX1586_V3,
+ .platform_data = &balloon3_max1587a_v3_info,
+ }
};
-static struct gpio_led_platform_data balloon3_gpio_leds_platform_data = {
- .leds = balloon3_gpio_leds,
- .num_leds = ARRAY_SIZE(balloon3_gpio_leds),
+static struct max1586_platform_data balloon3_max1587a_info = {
+ .subdevs = balloon3_max1587a_subdevs,
+ .num_subdevs = ARRAY_SIZE(balloon3_max1587a_subdevs),
+ .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
};
-static struct platform_device balloon3led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &balloon3_gpio_leds_platform_data,
+static struct i2c_board_info __initdata balloon3_pi2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("max1586", 0x14),
+ .platform_data = &balloon3_max1587a_info,
},
};
-static void __init balloon3_init(void)
+static void __init balloon3_pmic_init(void)
{
- pr_info("Initialising Balloon3\n");
+ pxa27x_set_i2c_power_info(NULL);
+ i2c_register_board_info(1, ARRAY_AND_SIZE(balloon3_pi2c_board_info));
+}
+#else
+static inline void balloon3_pmic_init(void) {}
+#endif
- /* system bus arbiter setting
- * - Core_Park
- * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
- */
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static void __init balloon3_init(void)
+{
ARB_CNTRL = ARB_CORE_PARK | 0x234;
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
+
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- pxa_set_i2c_info(NULL);
- if (balloon3_has(BALLOON3_FEATURE_AUDIO)) {
- pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
- pxa_set_ac97_info(NULL);
- }
-
- if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) {
- pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
- gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT,
- "LCD Backlight Power");
- gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
- set_pxa_fb_info(&balloon3_pxafb_info);
- }
-
- if (balloon3_has(BALLOON3_FEATURE_MMC)) {
- pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
- pxa_set_mci_info(&balloon3_mci_platform_data);
- }
- pxa_set_ficp_info(&balloon3_ficp_platform_data);
- if (balloon3_has(BALLOON3_FEATURE_OHCI)) {
- pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ohci_pin_config));
- pxa_set_ohci_info(&balloon3_ohci_platform_data);
- }
- pxa_set_udc_info(&balloon3_udc_info);
-
- pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
-
- platform_device_register(&balloon3led_device);
+ balloon3_i2c_init();
+ balloon3_irda_init();
+ balloon3_lcd_init();
+ balloon3_leds_init();
+ balloon3_mmc_init();
+ balloon3_nand_init();
+ balloon3_nor_init();
+ balloon3_pmic_init();
+ balloon3_ts_init();
+ balloon3_udc_init();
+ balloon3_uhc_init();
}
static struct map_desc balloon3_io_desc[] __initdata = {