summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/mach-bf527/boards/tll6527m.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf527/boards/tll6527m.c')
-rw-r--r--arch/blackfin/mach-bf527/boards/tll6527m.c946
1 files changed, 0 insertions, 946 deletions
diff --git a/arch/blackfin/mach-bf527/boards/tll6527m.c b/arch/blackfin/mach-bf527/boards/tll6527m.c
deleted file mode 100644
index ce5488e8226b..000000000000
--- a/arch/blackfin/mach-bf527/boards/tll6527m.c
+++ /dev/null
@@ -1,946 +0,0 @@
-/* File: arch/blackfin/mach-bf527/boards/tll6527m.c
- * Based on: arch/blackfin/mach-bf527/boards/ezkit.c
- * Author: Ashish Gupta
- *
- * Copyright: 2010 - The Learning Labs Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/device.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/usb/musb.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <asm/dma.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/reboot.h>
-#include <asm/nand.h>
-#include <asm/portmux.h>
-#include <asm/dpmc.h>
-
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
-#include <linux/platform_data/ad7879.h>
-#define LCD_BACKLIGHT_GPIO 0x40
-/* TLL6527M uses TLL7UIQ35 / ADI LCD EZ Extender. AD7879 AUX GPIO is used for
- * LCD Backlight Enable
- */
-#endif
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "TLL6527M";
-/*
- * Driver needs to know address, irq and flag pin.
- */
-
-#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-static struct resource musb_resources[] = {
- [0] = {
- .start = 0xffc03800,
- .end = 0xffc03cff,
- .flags = IORESOURCE_MEM,
- },
- [1] = { /* general IRQ */
- .start = IRQ_USB_INT0,
- .end = IRQ_USB_INT0,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
- [2] = { /* DMA IRQ */
- .start = IRQ_USB_DMA,
- .end = IRQ_USB_DMA,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct musb_hdrc_config musb_config = {
- .multipoint = 0,
- .dyn_fifo = 0,
- .soft_con = 1,
- .dma = 1,
- .num_eps = 8,
- .dma_channels = 8,
- /*.gpio_vrsel = GPIO_PG13,*/
- /* Some custom boards need to be active low, just set it to "0"
- * if it is the case.
- */
- .gpio_vrsel_active = 1,
-};
-
-static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_USB_MUSB_OTG)
- .mode = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
- .mode = MUSB_HOST,
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
- .mode = MUSB_PERIPHERAL,
-#endif
- .config = &musb_config,
-};
-
-static u64 musb_dmamask = ~(u32)0;
-
-static struct platform_device musb_device = {
- .name = "musb-blackfin",
- .id = 0,
- .dev = {
- .dma_mask = &musb_dmamask,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &musb_plat,
- },
- .num_resources = ARRAY_SIZE(musb_resources),
- .resource = musb_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
-#include <asm/bfin-lq035q1.h>
-
-static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
- .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
- .ppi_mode = USE_RGB565_16_BIT_PPI,
- .use_bl = 1,
- .gpio_bl = LCD_BACKLIGHT_GPIO,
-};
-
-static struct resource bfin_lq035q1_resources[] = {
- {
- .start = IRQ_PPI_ERROR,
- .end = IRQ_PPI_ERROR,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device bfin_lq035q1_device = {
- .name = "bfin-lq035q1",
- .id = -1,
- .num_resources = ARRAY_SIZE(bfin_lq035q1_resources),
- .resource = bfin_lq035q1_resources,
- .dev = {
- .platform_data = &bfin_lq035q1_data,
- },
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
-static struct mtd_partition tll6527m_partitions[] = {
- {
- .name = "bootloader(nor)",
- .size = 0xA0000,
- .offset = 0,
- }, {
- .name = "linux kernel(nor)",
- .size = 0xD00000,
- .offset = MTDPART_OFS_APPEND,
- }, {
- .name = "file system(nor)",
- .size = MTDPART_SIZ_FULL,
- .offset = MTDPART_OFS_APPEND,
- }
-};
-
-static struct physmap_flash_data tll6527m_flash_data = {
- .width = 2,
- .parts = tll6527m_partitions,
- .nr_parts = ARRAY_SIZE(tll6527m_partitions),
-};
-
-static unsigned tll6527m_flash_gpios[] = { GPIO_PG11, GPIO_PH11, GPIO_PH12 };
-
-static struct resource tll6527m_flash_resource[] = {
- {
- .name = "cfi_probe",
- .start = 0x20000000,
- .end = 0x201fffff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = (unsigned long)tll6527m_flash_gpios,
- .end = ARRAY_SIZE(tll6527m_flash_gpios),
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device tll6527m_flash_device = {
- .name = "gpio-addr-flash",
- .id = 0,
- .dev = {
- .platform_data = &tll6527m_flash_data,
- },
- .num_resources = ARRAY_SIZE(tll6527m_flash_resource),
- .resource = tll6527m_flash_resource,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_GPIO_DECODER)
-/* An SN74LVC138A 3:8 decoder chip has been used to generate 7 augmented
- * outputs used as SPI CS lines for all SPI SLAVE devices on TLL6527v1-0.
- * EXP_GPIO_SPISEL_BASE is the base number for the expanded outputs being
- * used as SPI CS lines, this should be > MAX_BLACKFIN_GPIOS
- */
-#include <linux/gpio-decoder.h>
-#define EXP_GPIO_SPISEL_BASE 0x64
-static unsigned gpio_addr_inputs[] = {
- GPIO_PG1, GPIO_PH9, GPIO_PH10
-};
-
-static struct gpio_decoder_platform_data spi_decoded_cs = {
- .base = EXP_GPIO_SPISEL_BASE,
- .input_addrs = gpio_addr_inputs,
- .nr_input_addrs = ARRAY_SIZE(gpio_addr_inputs),
- .default_output = 0,
-/* .default_output = (1 << ARRAY_SIZE(gpio_addr_inputs)) - 1 */
-};
-
-static struct platform_device spi_decoded_gpio = {
- .name = "gpio-decoder",
- .id = 0,
- .dev = {
- .platform_data = &spi_decoded_cs,
- },
-};
-
-#else
-#define EXP_GPIO_SPISEL_BASE 0x0
-
-#endif
-
-#if IS_ENABLED(CONFIG_INPUT_ADXL34X)
-#include <linux/input/adxl34x.h>
-static const struct adxl34x_platform_data adxl345_info = {
- .x_axis_offset = 0,
- .y_axis_offset = 0,
- .z_axis_offset = 0,
- .tap_threshold = 0x31,
- .tap_duration = 0x10,
- .tap_latency = 0x60,
- .tap_window = 0xF0,
- .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
- .act_axis_control = 0xFF,
- .activity_threshold = 5,
- .inactivity_threshold = 2,
- .inactivity_time = 2,
- .free_fall_threshold = 0x7,
- .free_fall_time = 0x20,
- .data_rate = 0x8,
- .data_range = ADXL_FULL_RES,
-
- .ev_type = EV_ABS,
- .ev_code_x = ABS_X, /* EV_REL */
- .ev_code_y = ABS_Y, /* EV_REL */
- .ev_code_z = ABS_Z, /* EV_REL */
-
- .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
-
-/* .ev_code_ff = KEY_F,*/ /* EV_KEY */
- .ev_code_act_inactivity = KEY_A, /* EV_KEY */
- .use_int2 = 1,
- .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
- .fifo_mode = ADXL_FIFO_STREAM,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
-static struct platform_device rtc_device = {
- .name = "rtc-bfin",
- .id = -1,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_MAC)
-#include <linux/bfin_mac.h>
-static const unsigned short bfin_mac_peripherals[] = P_RMII0;
-
-static struct bfin_phydev_platform_data bfin_phydev_data[] = {
- {
- .addr = 1,
- .irq = IRQ_MAC_PHYINT,
- },
-};
-
-static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
- .phydev_number = 1,
- .phydev_data = bfin_phydev_data,
- .phy_mode = PHY_INTERFACE_MODE_RMII,
- .mac_peripherals = bfin_mac_peripherals,
-};
-
-static struct platform_device bfin_mii_bus = {
- .name = "bfin_mii_bus",
- .dev = {
- .platform_data = &bfin_mii_bus_data,
- }
-};
-
-static struct platform_device bfin_mac_device = {
- .name = "bfin_mac",
- .dev = {
- .platform_data = &bfin_mii_bus,
- }
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_M25P80)
-static struct mtd_partition bfin_spi_flash_partitions[] = {
- {
- .name = "bootloader(spi)",
- .size = 0x00040000,
- .offset = 0,
- .mask_flags = MTD_CAP_ROM
- }, {
- .name = "linux kernel(spi)",
- .size = MTDPART_SIZ_FULL,
- .offset = MTDPART_OFS_APPEND,
- }
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
- .name = "m25p80",
- .parts = bfin_spi_flash_partitions,
- .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
- .type = "m25p16",
-};
-
-/* SPI flash chip (m25p64) */
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
- .enable_dma = 0, /* use dma transfer with this chip*/
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MMC_SPI)
-static struct bfin5xx_spi_chip mmc_spi_chip_info = {
- .enable_dma = 0,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
-static const struct ad7879_platform_data bfin_ad7879_ts_info = {
- .model = 7879, /* Model = AD7879 */
- .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */
- .pressure_max = 10000,
- .pressure_min = 0,
- .first_conversion_delay = 3,
- /* wait 512us before do a first conversion */
- .acquisition_time = 1, /* 4us acquisition time per sample */
- .median = 2, /* do 8 measurements */
- .averaging = 1,
- /* take the average of 4 middle samples */
- .pen_down_acc_interval = 255, /* 9.4 ms */
- .gpio_export = 1, /* configure AUX as GPIO output*/
- .gpio_base = LCD_BACKLIGHT_GPIO,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
-static struct platform_device bfin_i2s = {
- .name = "bfin-i2s",
- .id = CONFIG_SND_BF5XX_SPORT_NUM,
- /* TODO: add platform data here */
-};
-#endif
-
-#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
-#include <linux/spi/mcp23s08.h>
-static const struct mcp23s08_platform_data bfin_mcp23s08_sys_gpio_info = {
- .spi_present_mask = BIT(0),
- .base = 0x30,
-};
-static const struct mcp23s08_platform_data bfin_mcp23s08_usr_gpio_info = {
- .spi_present_mask = BIT(2),
- .base = 0x38,
-};
-#endif
-
-static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if IS_ENABLED(CONFIG_MTD_M25P80)
- {
- /* the modalias must be the same as spi device driver name */
- .modalias = "m25p80", /* Name of spi_driver for this device */
- .max_speed_hz = 25000000,
- /* max spi clock (SCK) speed in HZ */
- .bus_num = 0, /* Framework bus number */
- .chip_select = EXP_GPIO_SPISEL_BASE + 0x04 + MAX_CTRL_CS,
- /* Can be connected to TLL6527M GPIO connector */
- /* Either SPI_ADC or M25P80 FLASH can be installed at a time */
- .platform_data = &bfin_spi_flash_data,
- .controller_data = &spi_flash_chip_info,
- .mode = SPI_MODE_3,
- },
-#endif
-
-#if IS_ENABLED(CONFIG_MMC_SPI)
- {
- .modalias = "mmc_spi",
-/*
- * TLL6527M V1.0 does not support SD Card at SPI Clock > 10 MHz due to
- * SPI buffer limitations
- */
- .max_speed_hz = 10000000,
- /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = EXP_GPIO_SPISEL_BASE + 0x05 + MAX_CTRL_CS,
- .controller_data = &mmc_spi_chip_info,
- .mode = SPI_MODE_0,
- },
-#endif
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
- {
- .modalias = "ad7879",
- .platform_data = &bfin_ad7879_ts_info,
- .irq = IRQ_PH14,
- .max_speed_hz = 5000000,
- /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = EXP_GPIO_SPISEL_BASE + 0x07 + MAX_CTRL_CS,
- .mode = SPI_CPHA | SPI_CPOL,
- },
-#endif
-#if IS_ENABLED(CONFIG_SPI_SPIDEV)
- {
- .modalias = "spidev",
- .max_speed_hz = 10000000,
- /* TLL6527Mv1-0 supports max spi clock (SCK) speed = 10 MHz */
- .bus_num = 0,
- .chip_select = EXP_GPIO_SPISEL_BASE + 0x03 + MAX_CTRL_CS,
- .mode = SPI_CPHA | SPI_CPOL,
- },
-#endif
-#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
- {
- .modalias = "bfin-lq035q1-spi",
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = EXP_GPIO_SPISEL_BASE + 0x06 + MAX_CTRL_CS,
- .mode = SPI_CPHA | SPI_CPOL,
- },
-#endif
-#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
- {
- .modalias = "mcp23s08",
- .platform_data = &bfin_mcp23s08_sys_gpio_info,
- .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = EXP_GPIO_SPISEL_BASE + 0x01 + MAX_CTRL_CS,
- .mode = SPI_CPHA | SPI_CPOL,
- },
- {
- .modalias = "mcp23s08",
- .platform_data = &bfin_mcp23s08_usr_gpio_info,
- .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = EXP_GPIO_SPISEL_BASE + 0x02 + MAX_CTRL_CS,
- .mode = SPI_CPHA | SPI_CPOL,
- },
-#endif
-};
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-/* SPI controller data */
-static struct bfin5xx_spi_master bfin_spi0_info = {
- .num_chipselect = EXP_GPIO_SPISEL_BASE + 8 + MAX_CTRL_CS,
- /* EXP_GPIO_SPISEL_BASE will be > MAX_BLACKFIN_GPIOS */
- .enable_dma = 1, /* master has the ability to do dma transfer */
- .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
-};
-
-/* SPI (0) */
-static struct resource bfin_spi0_resource[] = {
- [0] = {
- .start = SPI0_REGBASE,
- .end = SPI0_REGBASE + 0xFF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = CH_SPI,
- .end = CH_SPI,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = IRQ_SPI,
- .end = IRQ_SPI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device bfin_spi0_device = {
- .name = "bfin-spi",
- .id = 0, /* Bus number */
- .num_resources = ARRAY_SIZE(bfin_spi0_resource),
- .resource = bfin_spi0_resource,
- .dev = {
- .platform_data = &bfin_spi0_info, /* Passed to driver */
- },
-};
-#endif /* spi master and devices */
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-static struct resource bfin_uart0_resources[] = {
- {
- .start = UART0_THR,
- .end = UART0_GCTL+2,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_UART0_TX,
- .end = IRQ_UART0_TX,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = IRQ_UART0_ERROR,
- .end = IRQ_UART0_ERROR,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = CH_UART0_TX,
- .end = CH_UART0_TX,
- .flags = IORESOURCE_DMA,
- },
- {
- .start = CH_UART0_RX,
- .end = CH_UART0_RX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static unsigned short bfin_uart0_peripherals[] = {
- P_UART0_TX, P_UART0_RX, 0
-};
-
-static struct platform_device bfin_uart0_device = {
- .name = "bfin-uart",
- .id = 0,
- .num_resources = ARRAY_SIZE(bfin_uart0_resources),
- .resource = bfin_uart0_resources,
- .dev = {
- .platform_data = &bfin_uart0_peripherals,
- /* Passed to driver */
- },
-};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-static struct resource bfin_uart1_resources[] = {
- {
- .start = UART1_THR,
- .end = UART1_GCTL+2,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_UART1_TX,
- .end = IRQ_UART1_TX,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = IRQ_UART1_ERROR,
- .end = IRQ_UART1_ERROR,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = CH_UART1_TX,
- .end = CH_UART1_TX,
- .flags = IORESOURCE_DMA,
- },
- {
- .start = CH_UART1_RX,
- .end = CH_UART1_RX,
- .flags = IORESOURCE_DMA,
- },
-#ifdef CONFIG_BFIN_UART1_CTSRTS
- { /* CTS pin */
- .start = GPIO_PF9,
- .end = GPIO_PF9,
- .flags = IORESOURCE_IO,
- },
- { /* RTS pin */
- .start = GPIO_PF10,
- .end = GPIO_PF10,
- .flags = IORESOURCE_IO,
- },
-#endif
-};
-
-static unsigned short bfin_uart1_peripherals[] = {
- P_UART1_TX, P_UART1_RX, 0
-};
-
-static struct platform_device bfin_uart1_device = {
- .name = "bfin-uart",
- .id = 1,
- .num_resources = ARRAY_SIZE(bfin_uart1_resources),
- .resource = bfin_uart1_resources,
- .dev = {
- .platform_data = &bfin_uart1_peripherals,
- /* Passed to driver */
- },
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
- {
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = CH_UART0_RX,
- .end = CH_UART0_RX+1,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct platform_device bfin_sir0_device = {
- .name = "bfin_sir",
- .id = 0,
- .num_resources = ARRAY_SIZE(bfin_sir0_resources),
- .resource = bfin_sir0_resources,
-};
-#endif
-#ifdef CONFIG_BFIN_SIR1
-static struct resource bfin_sir1_resources[] = {
- {
- .start = 0xFFC02000,
- .end = 0xFFC020FF,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = CH_UART1_RX,
- .end = CH_UART1_RX+1,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct platform_device bfin_sir1_device = {
- .name = "bfin_sir",
- .id = 1,
- .num_resources = ARRAY_SIZE(bfin_sir1_resources),
- .resource = bfin_sir1_resources,
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
-static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
-
-static struct resource bfin_twi0_resource[] = {
- [0] = {
- .start = TWI0_REGBASE,
- .end = TWI0_REGBASE,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_TWI,
- .end = IRQ_TWI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device i2c_bfin_twi_device = {
- .name = "i2c-bfin-twi",
- .id = 0,
- .num_resources = ARRAY_SIZE(bfin_twi0_resource),
- .resource = bfin_twi0_resource,
- .dev = {
- .platform_data = &bfin_twi0_pins,
- },
-};
-#endif
-
-static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
- {
- I2C_BOARD_INFO("pcf8574_lcd", 0x22),
- },
-#endif
-
-#if IS_ENABLED(CONFIG_FB_BFIN_7393)
- {
- I2C_BOARD_INFO("bfin-adv7393", 0x2B),
- },
-#endif
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C)
- {
- I2C_BOARD_INFO("ad7879", 0x2C),
- .irq = IRQ_PH14,
- .platform_data = (void *)&bfin_ad7879_ts_info,
- },
-#endif
-#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
- {
- I2C_BOARD_INFO("ssm2602", 0x1b),
- },
-#endif
- {
- I2C_BOARD_INFO("adm1192", 0x2e),
- },
-
- {
- I2C_BOARD_INFO("ltc3576", 0x09),
- },
-#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C)
- {
- I2C_BOARD_INFO("adxl34x", 0x53),
- .irq = IRQ_PH13,
- .platform_data = (void *)&adxl345_info,
- },
-#endif
-};
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-static struct resource bfin_sport0_uart_resources[] = {
- {
- .start = SPORT0_TCR1,
- .end = SPORT0_MRCS3+4,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_SPORT0_RX,
- .end = IRQ_SPORT0_RX+1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = IRQ_SPORT0_ERROR,
- .end = IRQ_SPORT0_ERROR,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static unsigned short bfin_sport0_peripherals[] = {
- P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
- P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
-};
-
-static struct platform_device bfin_sport0_uart_device = {
- .name = "bfin-sport-uart",
- .id = 0,
- .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
- .resource = bfin_sport0_uart_resources,
- .dev = {
- .platform_data = &bfin_sport0_peripherals,
- /* Passed to driver */
- },
-};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-static struct resource bfin_sport1_uart_resources[] = {
- {
- .start = SPORT1_TCR1,
- .end = SPORT1_MRCS3+4,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_SPORT1_RX,
- .end = IRQ_SPORT1_RX+1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = IRQ_SPORT1_ERROR,
- .end = IRQ_SPORT1_ERROR,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static unsigned short bfin_sport1_peripherals[] = {
- P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
- P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
-};
-
-static struct platform_device bfin_sport1_uart_device = {
- .name = "bfin-sport-uart",
- .id = 1,
- .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
- .resource = bfin_sport1_uart_resources,
- .dev = {
- .platform_data = &bfin_sport1_peripherals,
- /* Passed to driver */
- },
-};
-#endif
-#endif
-
-static const unsigned int cclk_vlev_datasheet[] = {
- VRPAIR(VLEV_100, 400000000),
- VRPAIR(VLEV_105, 426000000),
- VRPAIR(VLEV_110, 500000000),
- VRPAIR(VLEV_115, 533000000),
- VRPAIR(VLEV_120, 600000000),
-};
-
-static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
- .tuple_tab = cclk_vlev_datasheet,
- .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
- .vr_settling_time = 25 /* us */,
-};
-
-static struct platform_device bfin_dpmc = {
- .name = "bfin dpmc",
- .dev = {
- .platform_data = &bfin_dmpc_vreg_data,
- },
-};
-
-static struct platform_device *tll6527m_devices[] __initdata = {
-
- &bfin_dpmc,
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
- &rtc_device,
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
- &musb_device,
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_MAC)
- &bfin_mii_bus,
- &bfin_mac_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
- &bfin_spi0_device,
-#endif
-
-#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
- &bfin_lq035q1_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
- &bfin_uart0_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
- &bfin_uart1_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
- &bfin_sir0_device,
-#endif
-#ifdef CONFIG_BFIN_SIR1
- &bfin_sir1_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
- &i2c_bfin_twi_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
- &bfin_sport0_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
- &bfin_sport1_uart_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
- &tll6527m_flash_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
- &bfin_i2s,
-#endif
-
-#if IS_ENABLED(CONFIG_GPIO_DECODER)
- &spi_decoded_gpio,
-#endif
-};
-
-static int __init tll6527m_init(void)
-{
- printk(KERN_INFO "%s(): registering device resources\n", __func__);
- i2c_register_board_info(0, bfin_i2c_board_info,
- ARRAY_SIZE(bfin_i2c_board_info));
- platform_add_devices(tll6527m_devices, ARRAY_SIZE(tll6527m_devices));
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
- return 0;
-}
-
-arch_initcall(tll6527m_init);
-
-static struct platform_device *tll6527m_early_devices[] __initdata = {
-#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
-#ifdef CONFIG_SERIAL_BFIN_UART0
- &bfin_uart0_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
- &bfin_uart1_device,
-#endif
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
- &bfin_sport0_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
- &bfin_sport1_uart_device,
-#endif
-#endif
-};
-
-void __init native_machine_early_platform_add_devices(void)
-{
- printk(KERN_INFO "register early platform devices\n");
- early_platform_add_devices(tll6527m_early_devices,
- ARRAY_SIZE(tll6527m_early_devices));
-}
-
-void native_machine_restart(char *cmd)
-{
- /* workaround reboot hang when booting from SPI */
- if ((bfin_read_SYSCR() & 0x7) == 0x3)
- bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
-}
-
-int bfin_get_ether_addr(char *addr)
-{
- /* the MAC is stored in OTP memory page 0xDF */
- u32 ret;
- u64 otp_mac;
- u32 (*otp_read)(u32 page, u32 flags,
- u64 *page_content) = (void *)0xEF00001A;
-
- ret = otp_read(0xDF, 0x00, &otp_mac);
- if (!(ret & 0x1)) {
- char *otp_mac_p = (char *)&otp_mac;
- for (ret = 0; ret < 6; ++ret)
- addr[ret] = otp_mac_p[5 - ret];
- }
- return 0;
-}
-EXPORT_SYMBOL(bfin_get_ether_addr);