diff options
Diffstat (limited to 'arch/blackfin/mach-bf548/include')
| -rw-r--r-- | arch/blackfin/mach-bf548/include/mach/anomaly.h | 16 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h | 74 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf548/include/mach/defBF542.h | 130 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf548/include/mach/defBF544.h | 6 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf548/include/mach/defBF547.h | 136 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf548/include/mach/defBF54x_base.h | 270 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf548/include/mach/gpio.h | 10 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf548/include/mach/pll.h | 69 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf548/include/mach/portmux.h | 3 |
9 files changed, 117 insertions, 597 deletions
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index 7d08c7524498..4070079e2c00 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -5,7 +5,7 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2009 Analog Devices Inc. + * Copyright 2004-2010 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ @@ -28,7 +28,7 @@ #define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) -/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */ +/* Data Corruption/Core Hang with L2/L3 Configured in Writeback Cache Mode */ #define ANOMALY_05000220 (1) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) @@ -210,10 +210,16 @@ #define ANOMALY_05000473 (1) /* Access to DDR-SDRAM causes system hang under certain PLL/VR settings */ #define ANOMALY_05000474 (1) -/* Core Hang With L2/L3 Configured in Writeback Cache Mode */ -#define ANOMALY_05000475 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) +/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ +#define ANOMALY_05000481 (1) +/* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */ +#define ANOMALY_05000483 (1) +/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */ +#define ANOMALY_05000485 (__SILICON_REVISION__ >= 2) +/* IFLUSH sucks at life */ +#define ANOMALY_05000491 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -229,6 +235,7 @@ #define ANOMALY_05000198 (0) #define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) +#define ANOMALY_05000219 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) #define ANOMALY_05000231 (0) @@ -263,5 +270,6 @@ #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000475 (0) #endif diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h index 32f71e6a7c15..deaf5d6542d5 100644 --- a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h @@ -40,6 +40,8 @@ /* SIC Registers */ +#define bfin_read_SIC_RVECT() bfin_read32(SIC_RVECT) +#define bfin_write_SIC_RVECT(val) bfin_write32(SIC_RVECT, val) #define bfin_read_SIC_IMASK0() bfin_read32(SIC_IMASK0) #define bfin_write_SIC_IMASK0(val) bfin_write32(SIC_IMASK0, val) #define bfin_read_SIC_IMASK1() bfin_read32(SIC_IMASK1) @@ -301,10 +303,10 @@ /* DMAC0 Registers */ -#define bfin_read_DMAC0_TCPER() bfin_read16(DMAC0_TCPER) -#define bfin_write_DMAC0_TCPER(val) bfin_write16(DMAC0_TCPER, val) -#define bfin_read_DMAC0_TCCNT() bfin_read16(DMAC0_TCCNT) -#define bfin_write_DMAC0_TCCNT(val) bfin_write16(DMAC0_TCCNT, val) +#define bfin_read_DMAC0_TC_PER() bfin_read16(DMAC0_TC_PER) +#define bfin_write_DMAC0_TC_PER(val) bfin_write16(DMAC0_TC_PER, val) +#define bfin_read_DMAC0_TC_CNT() bfin_read16(DMAC0_TC_CNT) +#define bfin_write_DMAC0_TC_CNT(val) bfin_write16(DMAC0_TC_CNT, val) /* DMA Channel 0 Registers */ @@ -1155,10 +1157,10 @@ /* DMAC1 Registers */ -#define bfin_read_DMAC1_TCPER() bfin_read16(DMAC1_TCPER) -#define bfin_write_DMAC1_TCPER(val) bfin_write16(DMAC1_TCPER, val) -#define bfin_read_DMAC1_TCCNT() bfin_read16(DMAC1_TCCNT) -#define bfin_write_DMAC1_TCCNT(val) bfin_write16(DMAC1_TCCNT, val) +#define bfin_read_DMAC1_TC_PER() bfin_read16(DMAC1_TC_PER) +#define bfin_write_DMAC1_TC_PER(val) bfin_write16(DMAC1_TC_PER, val) +#define bfin_read_DMAC1_TC_CNT() bfin_read16(DMAC1_TC_CNT) +#define bfin_write_DMAC1_TC_CNT(val) bfin_write16(DMAC1_TC_CNT, val) /* DMA Channel 12 Registers */ @@ -2648,61 +2650,5 @@ /* These need to be last due to the cdef/linux inter-dependencies */ #include <asm/irq.h> -/* Writing to PLL_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_PLL_CTL(unsigned int val) -{ - unsigned long flags, iwr0, iwr1, iwr2; - - if (val == bfin_read_PLL_CTL()) - return; - - local_irq_save_hw(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr0 = bfin_read32(SIC_IWR0); - iwr1 = bfin_read32(SIC_IWR1); - iwr2 = bfin_read32(SIC_IWR2); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR0, IWR_ENABLE(0)); - bfin_write32(SIC_IWR1, 0); - bfin_write32(SIC_IWR2, 0); - - bfin_write16(PLL_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR0, iwr0); - bfin_write32(SIC_IWR1, iwr1); - bfin_write32(SIC_IWR2, iwr2); - local_irq_restore_hw(flags); -} - -/* Writing to VR_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_VR_CTL(unsigned int val) -{ - unsigned long flags, iwr0, iwr1, iwr2; - - if (val == bfin_read_VR_CTL()) - return; - - local_irq_save_hw(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr0 = bfin_read32(SIC_IWR0); - iwr1 = bfin_read32(SIC_IWR1); - iwr2 = bfin_read32(SIC_IWR2); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR0, IWR_ENABLE(0)); - bfin_write32(SIC_IWR1, 0); - bfin_write32(SIC_IWR2, 0); - - bfin_write16(VR_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR0, iwr0); - bfin_write32(SIC_IWR1, iwr1); - bfin_write32(SIC_IWR2, iwr2); - local_irq_restore_hw(flags); -} - #endif /* _CDEF_BF54X_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF542.h b/arch/blackfin/mach-bf548/include/mach/defBF542.h index d3bc6d1df547..abf5f750dd8b 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF542.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF542.h @@ -366,136 +366,6 @@ #define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */ -/* Bit masks for SDH_COMMAND */ - -#define CMD_IDX 0x3f /* Command Index */ -#define CMD_RSP 0x40 /* Response */ -#define CMD_L_RSP 0x80 /* Long Response */ -#define CMD_INT_E 0x100 /* Command Interrupt */ -#define CMD_PEND_E 0x200 /* Command Pending */ -#define CMD_E 0x400 /* Command Enable */ - -/* Bit masks for SDH_PWR_CTL */ - -#define PWR_ON 0x3 /* Power On */ -#if 0 -#define TBD 0x3c /* TBD */ -#endif -#define SD_CMD_OD 0x40 /* Open Drain Output */ -#define ROD_CTL 0x80 /* Rod Control */ - -/* Bit masks for SDH_CLK_CTL */ - -#define CLKDIV 0xff /* MC_CLK Divisor */ -#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ -#define PWR_SV_E 0x200 /* Power Save Enable */ -#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ -#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ - -/* Bit masks for SDH_RESP_CMD */ - -#define RESP_CMD 0x3f /* Response Command */ - -/* Bit masks for SDH_DATA_CTL */ - -#define DTX_E 0x1 /* Data Transfer Enable */ -#define DTX_DIR 0x2 /* Data Transfer Direction */ -#define DTX_MODE 0x4 /* Data Transfer Mode */ -#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ -#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ - -/* Bit masks for SDH_STATUS */ - -#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ -#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ -#define CMD_TIME_OUT 0x4 /* CMD Time Out */ -#define DAT_TIME_OUT 0x8 /* Data Time Out */ -#define TX_UNDERRUN 0x10 /* Transmit Underrun */ -#define RX_OVERRUN 0x20 /* Receive Overrun */ -#define CMD_RESP_END 0x40 /* CMD Response End */ -#define CMD_SENT 0x80 /* CMD Sent */ -#define DAT_END 0x100 /* Data End */ -#define START_BIT_ERR 0x200 /* Start Bit Error */ -#define DAT_BLK_END 0x400 /* Data Block End */ -#define CMD_ACT 0x800 /* CMD Active */ -#define TX_ACT 0x1000 /* Transmit Active */ -#define RX_ACT 0x2000 /* Receive Active */ -#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ -#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ -#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ -#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ -#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ -#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ -#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ -#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ - -/* Bit masks for SDH_STATUS_CLR */ - -#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ -#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ -#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ -#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ -#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ -#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ -#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ -#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ -#define DAT_END_STAT 0x100 /* Data End Status */ -#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ -#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ - -/* Bit masks for SDH_MASK0 */ - -#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ -#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ -#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ -#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ -#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ -#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ -#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ -#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ -#define DAT_END_MASK 0x100 /* Data End Mask */ -#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ -#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ -#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ -#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ -#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ -#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ -#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ -#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ -#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ -#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ -#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ -#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ -#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ - -/* Bit masks for SDH_FIFO_CNT */ - -#define FIFO_COUNT 0x7fff /* FIFO Count */ - -/* Bit masks for SDH_E_STATUS */ - -#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ -#define SD_CARD_DET 0x10 /* SD Card Detect */ - -/* Bit masks for SDH_E_MASK */ - -#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ -#define SCD_MSK 0x40 /* Mask Card Detect */ - -/* Bit masks for SDH_CFG */ - -#define CLKS_EN 0x1 /* Clocks Enable */ -#define SD4E 0x4 /* SDIO 4-Bit Enable */ -#define MWE 0x8 /* Moving Window Enable */ -#define SD_RST 0x10 /* SDMMC Reset */ -#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ -#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ -#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ - -/* Bit masks for SDH_RD_WAIT_EN */ - -#define RWR 0x1 /* Read Wait Request */ - /* Bit masks for ATAPI_CONTROL */ #define PIO_START 0x1 /* Start PIO/Reg Op */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h index f916c52a148a..e2771094de02 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF544.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h @@ -60,15 +60,15 @@ #define TWI1_REGBASE 0xffc02200 #define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */ #define TWI1_CONTROL 0xffc02204 /* TWI Control Register */ -#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */ +#define TWI1_SLAVE_CTL 0xffc02208 /* TWI Slave Mode Control Register */ #define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */ #define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */ -#define TWI1_MASTER_CTRL 0xffc02214 /* TWI Master Mode Control Register */ +#define TWI1_MASTER_CTL 0xffc02214 /* TWI Master Mode Control Register */ #define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */ #define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */ #define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */ #define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */ -#define TWI1_FIFO_CTRL 0xffc02228 /* TWI FIFO Control Register */ +#define TWI1_FIFO_CTL 0xffc02228 /* TWI FIFO Control Register */ #define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */ #define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */ #define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h index 72c343646b2a..be21ba5b3aa8 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF547.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h @@ -99,15 +99,15 @@ #define TWI1_REGBASE 0xffc02200 #define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */ #define TWI1_CONTROL 0xffc02204 /* TWI Control Register */ -#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */ +#define TWI1_SLAVE_CTL 0xffc02208 /* TWI Slave Mode Control Register */ #define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */ #define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */ -#define TWI1_MASTER_CTRL 0xffc02214 /* TWI Master Mode Control Register */ +#define TWI1_MASTER_CTL 0xffc02214 /* TWI Master Mode Control Register */ #define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */ #define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */ #define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */ #define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */ -#define TWI1_FIFO_CTRL 0xffc02228 /* TWI FIFO Control Register */ +#define TWI1_FIFO_CTL 0xffc02228 /* TWI FIFO Control Register */ #define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */ #define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */ #define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */ @@ -646,136 +646,6 @@ #define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */ -/* Bit masks for SDH_COMMAND */ - -#define CMD_IDX 0x3f /* Command Index */ -#define CMD_RSP 0x40 /* Response */ -#define CMD_L_RSP 0x80 /* Long Response */ -#define CMD_INT_E 0x100 /* Command Interrupt */ -#define CMD_PEND_E 0x200 /* Command Pending */ -#define CMD_E 0x400 /* Command Enable */ - -/* Bit masks for SDH_PWR_CTL */ - -#define PWR_ON 0x3 /* Power On */ -#if 0 -#define TBD 0x3c /* TBD */ -#endif -#define SD_CMD_OD 0x40 /* Open Drain Output */ -#define ROD_CTL 0x80 /* Rod Control */ - -/* Bit masks for SDH_CLK_CTL */ - -#define CLKDIV 0xff /* MC_CLK Divisor */ -#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ -#define PWR_SV_E 0x200 /* Power Save Enable */ -#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ -#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ - -/* Bit masks for SDH_RESP_CMD */ - -#define RESP_CMD 0x3f /* Response Command */ - -/* Bit masks for SDH_DATA_CTL */ - -#define DTX_E 0x1 /* Data Transfer Enable */ -#define DTX_DIR 0x2 /* Data Transfer Direction */ -#define DTX_MODE 0x4 /* Data Transfer Mode */ -#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ -#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ - -/* Bit masks for SDH_STATUS */ - -#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ -#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ -#define CMD_TIME_OUT 0x4 /* CMD Time Out */ -#define DAT_TIME_OUT 0x8 /* Data Time Out */ -#define TX_UNDERRUN 0x10 /* Transmit Underrun */ -#define RX_OVERRUN 0x20 /* Receive Overrun */ -#define CMD_RESP_END 0x40 /* CMD Response End */ -#define CMD_SENT 0x80 /* CMD Sent */ -#define DAT_END 0x100 /* Data End */ -#define START_BIT_ERR 0x200 /* Start Bit Error */ -#define DAT_BLK_END 0x400 /* Data Block End */ -#define CMD_ACT 0x800 /* CMD Active */ -#define TX_ACT 0x1000 /* Transmit Active */ -#define RX_ACT 0x2000 /* Receive Active */ -#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ -#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ -#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ -#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ -#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ -#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ -#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ -#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ - -/* Bit masks for SDH_STATUS_CLR */ - -#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ -#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ -#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ -#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ -#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ -#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ -#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ -#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ -#define DAT_END_STAT 0x100 /* Data End Status */ -#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ -#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ - -/* Bit masks for SDH_MASK0 */ - -#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ -#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ -#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ -#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ -#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ -#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ -#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ -#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ -#define DAT_END_MASK 0x100 /* Data End Mask */ -#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ -#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ -#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ -#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ -#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ -#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ -#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ -#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ -#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ -#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ -#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ -#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ -#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ - -/* Bit masks for SDH_FIFO_CNT */ - -#define FIFO_COUNT 0x7fff /* FIFO Count */ - -/* Bit masks for SDH_E_STATUS */ - -#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ -#define SD_CARD_DET 0x10 /* SD Card Detect */ - -/* Bit masks for SDH_E_MASK */ - -#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ -#define SCD_MSK 0x40 /* Mask Card Detect */ - -/* Bit masks for SDH_CFG */ - -#define CLKS_EN 0x1 /* Clocks Enable */ -#define SD4E 0x4 /* SDIO 4-Bit Enable */ -#define MWE 0x8 /* Moving Window Enable */ -#define SD_RST 0x10 /* SDMMC Reset */ -#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ -#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ -#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ - -/* Bit masks for SDH_RD_WAIT_EN */ - -#define RWR 0x1 /* Read Wait Request */ - /* Bit masks for ATAPI_CONTROL */ #define PIO_START 0x1 /* Start PIO/Reg Op */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h index 0ed06c2366fe..78f91103f175 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h @@ -35,6 +35,7 @@ /* SIC Registers */ +#define SIC_RVECT 0xffc00108 #define SIC_IMASK0 0xffc0010c /* System Interrupt Mask Register 0 */ #define SIC_IMASK1 0xffc00110 /* System Interrupt Mask Register 1 */ #define SIC_IMASK2 0xffc00114 /* System Interrupt Mask Register 2 */ @@ -105,15 +106,15 @@ #define TWI0_REGBASE 0xffc00700 #define TWI0_CLKDIV 0xffc00700 /* Clock Divider Register */ #define TWI0_CONTROL 0xffc00704 /* TWI Control Register */ -#define TWI0_SLAVE_CTRL 0xffc00708 /* TWI Slave Mode Control Register */ +#define TWI0_SLAVE_CTL 0xffc00708 /* TWI Slave Mode Control Register */ #define TWI0_SLAVE_STAT 0xffc0070c /* TWI Slave Mode Status Register */ #define TWI0_SLAVE_ADDR 0xffc00710 /* TWI Slave Mode Address Register */ -#define TWI0_MASTER_CTRL 0xffc00714 /* TWI Master Mode Control Register */ +#define TWI0_MASTER_CTL 0xffc00714 /* TWI Master Mode Control Register */ #define TWI0_MASTER_STAT 0xffc00718 /* TWI Master Mode Status Register */ #define TWI0_MASTER_ADDR 0xffc0071c /* TWI Master Mode Address Register */ #define TWI0_INT_STAT 0xffc00720 /* TWI Interrupt Status Register */ #define TWI0_INT_MASK 0xffc00724 /* TWI Interrupt Mask Register */ -#define TWI0_FIFO_CTRL 0xffc00728 /* TWI FIFO Control Register */ +#define TWI0_FIFO_CTL 0xffc00728 /* TWI FIFO Control Register */ #define TWI0_FIFO_STAT 0xffc0072c /* TWI FIFO Status Register */ #define TWI0_XMT_DATA8 0xffc00780 /* TWI FIFO Transmit Data Single Byte Register */ #define TWI0_XMT_DATA16 0xffc00784 /* TWI FIFO Transmit Data Double Byte Register */ @@ -198,8 +199,8 @@ /* DMAC0 Registers */ -#define DMAC0_TCPER 0xffc00b0c /* DMA Controller 0 Traffic Control Periods Register */ -#define DMAC0_TCCNT 0xffc00b10 /* DMA Controller 0 Current Counts Register */ +#define DMAC0_TC_PER 0xffc00b0c /* DMA Controller 0 Traffic Control Periods Register */ +#define DMAC0_TC_CNT 0xffc00b10 /* DMA Controller 0 Current Counts Register */ /* DMA Channel 0 Registers */ @@ -688,8 +689,8 @@ /* DMAC1 Registers */ -#define DMAC1_TCPER 0xffc01b0c /* DMA Controller 1 Traffic Control Periods Register */ -#define DMAC1_TCCNT 0xffc01b10 /* DMA Controller 1 Current Counts Register */ +#define DMAC1_TC_PER 0xffc01b0c /* DMA Controller 1 Traffic Control Periods Register */ +#define DMAC1_TC_CNT 0xffc01b10 /* DMA Controller 1 Current Counts Register */ /* DMA Channel 12 Registers */ @@ -1958,57 +1959,6 @@ #define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */ #define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */ -/* Bit masks for CNT_CONFIG */ - -#define CNTE 0x1 /* Counter Enable */ -#define DEBE 0x2 /* Debounce Enable */ -#define CDGINV 0x10 /* CDG Pin Polarity Invert */ -#define CUDINV 0x20 /* CUD Pin Polarity Invert */ -#define CZMINV 0x40 /* CZM Pin Polarity Invert */ -#define CNTMODE 0x700 /* Counter Operating Mode */ -#define ZMZC 0x800 /* CZM Zeroes Counter Enable */ -#define BNDMODE 0x3000 /* Boundary register Mode */ -#define INPDIS 0x8000 /* CUG and CDG Input Disable */ - -/* Bit masks for CNT_IMASK */ - -#define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */ -#define UCIE 0x2 /* Up count Interrupt Enable */ -#define DCIE 0x4 /* Down count Interrupt Enable */ -#define MINCIE 0x8 /* Min Count Interrupt Enable */ -#define MAXCIE 0x10 /* Max Count Interrupt Enable */ -#define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */ -#define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */ -#define CZEROIE 0x80 /* Count to Zero Interrupt Enable */ -#define CZMIE 0x100 /* CZM Pin Interrupt Enable */ -#define CZMEIE 0x200 /* CZM Error Interrupt Enable */ -#define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */ - -/* Bit masks for CNT_STATUS */ - -#define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */ -#define UCII 0x2 /* Up count Interrupt Identifier */ -#define DCII 0x4 /* Down count Interrupt Identifier */ -#define MINCII 0x8 /* Min Count Interrupt Identifier */ -#define MAXCII 0x10 /* Max Count Interrupt Identifier */ -#define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */ -#define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */ -#define CZEROII 0x80 /* Count to Zero Interrupt Identifier */ -#define CZMII 0x100 /* CZM Pin Interrupt Identifier */ -#define CZMEII 0x200 /* CZM Error Interrupt Identifier */ -#define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */ - -/* Bit masks for CNT_COMMAND */ - -#define W1LCNT 0xf /* Load Counter Register */ -#define W1LMIN 0xf0 /* Load Min Register */ -#define W1LMAX 0xf00 /* Load Max Register */ -#define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */ - -/* Bit masks for CNT_DEBOUNCE */ - -#define DPRESCALE 0xf /* Load Counter Register */ - /* Bit masks for SECURE_SYSSWT */ #define EMUDABL 0x1 /* Emulation Disable. */ @@ -2044,66 +1994,6 @@ #define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ #define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ -/* Bit masks for NFC_CTL */ - -#define WR_DLY 0xf /* Write Strobe Delay */ -#define RD_DLY 0xf0 /* Read Strobe Delay */ -#define NWIDTH 0x100 /* NAND Data Width */ -#define PG_SIZE 0x200 /* Page Size */ - -/* Bit masks for NFC_STAT */ - -#define NBUSY 0x1 /* Not Busy */ -#define WB_FULL 0x2 /* Write Buffer Full */ -#define PG_WR_STAT 0x4 /* Page Write Pending */ -#define PG_RD_STAT 0x8 /* Page Read Pending */ -#define WB_EMPTY 0x10 /* Write Buffer Empty */ - -/* Bit masks for NFC_IRQSTAT */ - -#define NBUSYIRQ 0x1 /* Not Busy IRQ */ -#define WB_OVF 0x2 /* Write Buffer Overflow */ -#define WB_EDGE 0x4 /* Write Buffer Edge Detect */ -#define RD_RDY 0x8 /* Read Data Ready */ -#define WR_DONE 0x10 /* Page Write Done */ - -/* Bit masks for NFC_IRQMASK */ - -#define MASK_BUSYIRQ 0x1 /* Mask Not Busy IRQ */ -#define MASK_WBOVF 0x2 /* Mask Write Buffer Overflow */ -#define MASK_WBEMPTY 0x4 /* Mask Write Buffer Empty */ -#define MASK_RDRDY 0x8 /* Mask Read Data Ready */ -#define MASK_WRDONE 0x10 /* Mask Write Done */ - -/* Bit masks for NFC_RST */ - -#define ECC_RST 0x1 /* ECC (and NFC counters) Reset */ - -/* Bit masks for NFC_PGCTL */ - -#define PG_RD_START 0x1 /* Page Read Start */ -#define PG_WR_START 0x2 /* Page Write Start */ - -/* Bit masks for NFC_ECC0 */ - -#define ECC0 0x7ff /* Parity Calculation Result0 */ - -/* Bit masks for NFC_ECC1 */ - -#define ECC1 0x7ff /* Parity Calculation Result1 */ - -/* Bit masks for NFC_ECC2 */ - -#define ECC2 0x7ff /* Parity Calculation Result2 */ - -/* Bit masks for NFC_ECC3 */ - -#define ECC3 0x7ff /* Parity Calculation Result3 */ - -/* Bit masks for NFC_COUNT */ - -#define ECCCNT 0x3ff /* Transfer Count */ - /* Bit masks for EPPIx_STATUS */ #define CFIFO_ERR 0x1 /* Chroma FIFO Error */ @@ -2172,56 +2062,6 @@ #define LOW_EVEN 0xff0000 /* Lower Limit for Even Bytes (Luma) */ #define HIGH_EVEN 0xff000000 /* Upper Limit for Even Bytes (Luma) */ -/* Bit masks for SPIx_BAUD */ - -#define SPI_BAUD 0xffff /* Baud Rate */ - -/* Bit masks for SPIx_CTL */ - -#define SPE 0x4000 /* SPI Enable */ -#define WOM 0x2000 /* Write Open Drain Master */ -#define MSTR 0x1000 /* Master Mode */ -#define CPOL 0x800 /* Clock Polarity */ -#define CPHA 0x400 /* Clock Phase */ -#define LSBF 0x200 /* LSB First */ -#define SIZE 0x100 /* Size of Words */ -#define EMISO 0x20 /* Enable MISO Output */ -#define PSSE 0x10 /* Slave-Select Enable */ -#define GM 0x8 /* Get More Data */ -#define SZ 0x4 /* Send Zero */ -#define TIMOD 0x3 /* Transfer Initiation Mode */ - -/* Bit masks for SPIx_FLG */ - -#define FLS1 0x2 /* Slave Select Enable 1 */ -#define FLS2 0x4 /* Slave Select Enable 2 */ -#define FLS3 0x8 /* Slave Select Enable 3 */ -#define FLG1 0x200 /* Slave Select Value 1 */ -#define FLG2 0x400 /* Slave Select Value 2 */ -#define FLG3 0x800 /* Slave Select Value 3 */ - -/* Bit masks for SPIx_STAT */ - -#define TXCOL 0x40 /* Transmit Collision Error */ -#define RXS 0x20 /* RDBR Data Buffer Status */ -#define RBSY 0x10 /* Receive Error */ -#define TXS 0x8 /* TDBR Data Buffer Status */ -#define TXE 0x4 /* Transmission Error */ -#define MODF 0x2 /* Mode Fault Error */ -#define SPIF 0x1 /* SPI Finished */ - -/* Bit masks for SPIx_TDBR */ - -#define TDBR 0xffff /* Transmit Data Buffer */ - -/* Bit masks for SPIx_RDBR */ - -#define RDBR 0xffff /* Receive Data Buffer */ - -/* Bit masks for SPIx_SHADOW */ - -#define SHADOW 0xffff /* RDBR Shadow */ - /* ************************************************ */ /* The TWI bit masks fields are from the ADSP-BF538 */ /* and they have not been verified as the final */ @@ -2332,73 +2172,6 @@ #define RCVDATA16 0xffff /* Receive FIFO 16-Bit Data */ -/* Bit masks for SPORTx_TCR1 */ - -#define TCKFE 0x4000 /* Clock Falling Edge Select */ -#define LATFS 0x2000 /* Late Transmit Frame Sync */ -#define LTFS 0x1000 /* Low Transmit Frame Sync Select */ -#define DITFS 0x800 /* Data-Independent Transmit Frame Sync Select */ -#define TFSR 0x400 /* Transmit Frame Sync Required Select */ -#define ITFS 0x200 /* Internal Transmit Frame Sync Select */ -#define TLSBIT 0x10 /* Transmit Bit Order */ -#define TDTYPE 0xc /* Data Formatting Type Select */ -#define ITCLK 0x2 /* Internal Transmit Clock Select */ -#define TSPEN 0x1 /* Transmit Enable */ - -/* Bit masks for SPORTx_TCR2 */ - -#define TRFST 0x400 /* Left/Right Order */ -#define TSFSE 0x200 /* Transmit Stereo Frame Sync Enable */ -#define TXSE 0x100 /* TxSEC Enable */ -#define SLEN_T 0x1f /* SPORT Word Length */ - -/* Bit masks for SPORTx_RCR1 */ - -#define RCKFE 0x4000 /* Clock Falling Edge Select */ -#define LARFS 0x2000 /* Late Receive Frame Sync */ -#define LRFS 0x1000 /* Low Receive Frame Sync Select */ -#define RFSR 0x400 /* Receive Frame Sync Required Select */ -#define IRFS 0x200 /* Internal Receive Frame Sync Select */ -#define RLSBIT 0x10 /* Receive Bit Order */ -#define RDTYPE 0xc /* Data Formatting Type Select */ -#define IRCLK 0x2 /* Internal Receive Clock Select */ -#define RSPEN 0x1 /* Receive Enable */ - -/* Bit masks for SPORTx_RCR2 */ - -#define RRFST 0x400 /* Left/Right Order */ -#define RSFSE 0x200 /* Receive Stereo Frame Sync Enable */ -#define RXSE 0x100 /* RxSEC Enable */ -#define SLEN_R 0x1f /* SPORT Word Length */ - -/* Bit masks for SPORTx_STAT */ - -#define TXHRE 0x40 /* Transmit Hold Register Empty */ -#define TOVF 0x20 /* Sticky Transmit Overflow Status */ -#define TUVF 0x10 /* Sticky Transmit Underflow Status */ -#define TXF 0x8 /* Transmit FIFO Full Status */ -#define ROVF 0x4 /* Sticky Receive Overflow Status */ -#define RUVF 0x2 /* Sticky Receive Underflow Status */ -#define RXNE 0x1 /* Receive FIFO Not Empty Status */ - -/* Bit masks for SPORTx_MCMC1 */ - -#define SP_WSIZE 0xf000 /* Window Size */ -#define SP_WOFF 0x3ff /* Windows Offset */ - -/* Bit masks for SPORTx_MCMC2 */ - -#define MFD 0xf000 /* Multi channel Frame Delay */ -#define FSDR 0x80 /* Frame Sync to Data Relationship */ -#define MCMEN 0x10 /* Multi channel Frame Mode Enable */ -#define MCDRXPE 0x8 /* Multi channel DMA Receive Packing */ -#define MCDTXPE 0x4 /* Multi channel DMA Transmit Packing */ -#define MCCRM 0x3 /* 2X Clock Recovery Mode */ - -/* Bit masks for SPORTx_CHNL */ - -#define CUR_CHNL 0x3ff /* Current Channel Indicator */ - /* Bit masks for UARTx_LCR */ #if 0 @@ -2472,33 +2245,6 @@ #define BCODE_QUICKBOOT 0x0020 /* always perform quick boot */ #define BCODE_NOBOOT 0x0030 /* always perform full boot */ -/* CNT_COMMAND bit field options */ - -#define W1LCNT_ZERO 0x0001 /* write 1 to load CNT_COUNTER with zero */ -#define W1LCNT_MIN 0x0004 /* write 1 to load CNT_COUNTER from CNT_MIN */ -#define W1LCNT_MAX 0x0008 /* write 1 to load CNT_COUNTER from CNT_MAX */ - -#define W1LMIN_ZERO 0x0010 /* write 1 to load CNT_MIN with zero */ -#define W1LMIN_CNT 0x0020 /* write 1 to load CNT_MIN from CNT_COUNTER */ -#define W1LMIN_MAX 0x0080 /* write 1 to load CNT_MIN from CNT_MAX */ - -#define W1LMAX_ZERO 0x0100 /* write 1 to load CNT_MAX with zero */ -#define W1LMAX_CNT 0x0200 /* write 1 to load CNT_MAX from CNT_COUNTER */ -#define W1LMAX_MIN 0x0400 /* write 1 to load CNT_MAX from CNT_MIN */ - -/* CNT_CONFIG bit field options */ - -#define CNTMODE_QUADENC 0x0000 /* quadrature encoder mode */ -#define CNTMODE_BINENC 0x0100 /* binary encoder mode */ -#define CNTMODE_UDCNT 0x0200 /* up/down counter mode */ -#define CNTMODE_DIRCNT 0x0400 /* direction counter mode */ -#define CNTMODE_DIRTMR 0x0500 /* direction timer mode */ - -#define BNDMODE_COMP 0x0000 /* boundary compare mode */ -#define BNDMODE_ZERO 0x1000 /* boundary compare and zero mode */ -#define BNDMODE_CAPT 0x2000 /* boundary capture mode */ -#define BNDMODE_AEXT 0x3000 /* boundary auto-extend mode */ - /* TMODE in TIMERx_CONFIG bit field options */ #define PWM_OUT 0x0001 diff --git a/arch/blackfin/mach-bf548/include/mach/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h index 850e39d193e3..28037e331964 100644 --- a/arch/blackfin/mach-bf548/include/mach/gpio.h +++ b/arch/blackfin/mach-bf548/include/mach/gpio.h @@ -3,6 +3,10 @@ * Licensed under the GPL-2 or later. */ + +#ifndef _MACH_GPIO_H_ +#define _MACH_GPIO_H_ + #define GPIO_PA0 0 #define GPIO_PA1 1 #define GPIO_PA2 2 @@ -166,6 +170,8 @@ #define MAX_BLACKFIN_GPIOS 160 +#ifndef __ASSEMBLY__ + struct gpio_port_t { unsigned short port_fer; unsigned short dummy1; @@ -191,3 +197,7 @@ struct gpio_port_s { unsigned short inen; unsigned int mux; }; + +#endif + +#endif /* _MACH_GPIO_H_ */ diff --git a/arch/blackfin/mach-bf548/include/mach/pll.h b/arch/blackfin/mach-bf548/include/mach/pll.h new file mode 100644 index 000000000000..7865a090d333 --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/pll.h @@ -0,0 +1,69 @@ +/* + * Copyright 2007-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _MACH_PLL_H +#define _MACH_PLL_H + +#include <asm/blackfin.h> +#include <asm/irqflags.h> + +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1, iwr2; + + if (val == bfin_read_PLL_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + iwr2 = bfin_read32(SIC_IWR2); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + bfin_write32(SIC_IWR2, 0); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + bfin_write32(SIC_IWR2, iwr2); + hard_local_irq_restore(flags); +} + +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1, iwr2; + + if (val == bfin_read_VR_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + iwr2 = bfin_read32(SIC_IWR2); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + bfin_write32(SIC_IWR2, 0); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + bfin_write32(SIC_IWR2, iwr2); + hard_local_irq_restore(flags); +} + +#endif /* _MACH_PLL_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h index 89ad6a886362..e22246202730 100644 --- a/arch/blackfin/mach-bf548/include/mach/portmux.h +++ b/arch/blackfin/mach-bf548/include/mach/portmux.h @@ -7,7 +7,7 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ -#define MAX_RESOURCES MAX_BLACKFIN_GPIOS +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS #define P_SPORT2_TFS (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0)) #define P_SPORT2_DTSEC (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0)) @@ -131,6 +131,7 @@ #define P_KEY_COL2 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(3)) #define P_KEY_COL3 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(3)) +#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PE4 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1 #define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0)) #define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0)) |