summaryrefslogtreecommitdiffstats
path: root/arch/m68k/kernel/head.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/m68k/kernel/head.S')
-rw-r--r--arch/m68k/kernel/head.S3940
1 files changed, 3940 insertions, 0 deletions
diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S
new file mode 100644
index 000000000000..7cd6de17c20d
--- /dev/null
+++ b/arch/m68k/kernel/head.S
@@ -0,0 +1,3940 @@
+/* -*- mode: asm -*-
+**
+** head.S -- This file contains the initial boot code for the
+** Linux/68k kernel.
+**
+** Copyright 1993 by Hamish Macdonald
+**
+** 68040 fixes by Michael Rausch
+** 68060 fixes by Roman Hodek
+** MMU cleanup by Randy Thelen
+** Final MMU cleanup by Roman Zippel
+**
+** Atari support by Andreas Schwab, using ideas of Robert de Vries
+** and Bjoern Brauel
+** VME Support by Richard Hirst
+**
+** 94/11/14 Andreas Schwab: put kernel at PAGESIZE
+** 94/11/18 Andreas Schwab: remove identity mapping of STRAM for Atari
+** ++ Bjoern & Roman: ATARI-68040 support for the Medusa
+** 95/11/18 Richard Hirst: Added MVME166 support
+** 96/04/26 Guenther Kelleter: fixed identity mapping for Falcon with
+** Magnum- and FX-alternate ram
+** 98/04/25 Phil Blundell: added HP300 support
+** 1998/08/30 David Kilzer: Added support for font_desc structures
+** for linux-2.1.115
+** 9/02/11 Richard Zidlicky: added Q40 support (initial vesion 99/01/01)
+** 2004/05/13 Kars de Jong: Finalised HP300 support
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License. See the file README.legal in the main directory of this archive
+** for more details.
+**
+*/
+
+/*
+ * Linux startup code.
+ *
+ * At this point, the boot loader has:
+ * Disabled interrupts
+ * Disabled caches
+ * Put us in supervisor state.
+ *
+ * The kernel setup code takes the following steps:
+ * . Raise interrupt level
+ * . Set up initial kernel memory mapping.
+ * . This sets up a mapping of the 4M of memory the kernel is located in.
+ * . It also does a mapping of any initial machine specific areas.
+ * . Enable the MMU
+ * . Enable cache memories
+ * . Jump to kernel startup
+ *
+ * Much of the file restructuring was to accomplish:
+ * 1) Remove register dependency through-out the file.
+ * 2) Increase use of subroutines to perform functions
+ * 3) Increase readability of the code
+ *
+ * Of course, readability is a subjective issue, so it will never be
+ * argued that that goal was accomplished. It was merely a goal.
+ * A key way to help make code more readable is to give good
+ * documentation. So, the first thing you will find is exaustive
+ * write-ups on the structure of the file, and the features of the
+ * functional subroutines.
+ *
+ * General Structure:
+ * ------------------
+ * Without a doubt the single largest chunk of head.S is spent
+ * mapping the kernel and I/O physical space into the logical range
+ * for the kernel.
+ * There are new subroutines and data structures to make MMU
+ * support cleaner and easier to understand.
+ * First, you will find a routine call "mmu_map" which maps
+ * a logical to a physical region for some length given a cache
+ * type on behalf of the caller. This routine makes writing the
+ * actual per-machine specific code very simple.
+ * A central part of the code, but not a subroutine in itself,
+ * is the mmu_init code which is broken down into mapping the kernel
+ * (the same for all machines) and mapping machine-specific I/O
+ * regions.
+ * Also, there will be a description of engaging the MMU and
+ * caches.
+ * You will notice that there is a chunk of code which
+ * can emit the entire MMU mapping of the machine. This is present
+ * only in debug modes and can be very helpful.
+ * Further, there is a new console driver in head.S that is
+ * also only engaged in debug mode. Currently, it's only supported
+ * on the Macintosh class of machines. However, it is hoped that
+ * others will plug-in support for specific machines.
+ *
+ * ######################################################################
+ *
+ * mmu_map
+ * -------
+ * mmu_map was written for two key reasons. First, it was clear
+ * that it was very difficult to read the previous code for mapping
+ * regions of memory. Second, the Macintosh required such extensive
+ * memory allocations that it didn't make sense to propagate the
+ * existing code any further.
+ * mmu_map requires some parameters:
+ *
+ * mmu_map (logical, physical, length, cache_type)
+ *
+ * While this essentially describes the function in the abstract, you'll
+ * find more indepth description of other parameters at the implementation site.
+ *
+ * mmu_get_root_table_entry
+ * ------------------------
+ * mmu_get_ptr_table_entry
+ * -----------------------
+ * mmu_get_page_table_entry
+ * ------------------------
+ *
+ * These routines are used by other mmu routines to get a pointer into
+ * a table, if necessary a new table is allocated. These routines are working
+ * basically like pmd_alloc() and pte_alloc() in <asm/pgtable.h>. The root
+ * table needs of course only to be allocated once in mmu_get_root_table_entry,
+ * so that here also some mmu specific initialization is done. The second page
+ * at the start of the kernel (the first page is unmapped later) is used for
+ * the kernel_pg_dir. It must be at a position known at link time (as it's used
+ * to initialize the init task struct) and since it needs special cache
+ * settings, it's the easiest to use this page, the rest of the page is used
+ * for further pointer tables.
+ * mmu_get_page_table_entry allocates always a whole page for page tables, this
+ * means 1024 pages and so 4MB of memory can be mapped. It doesn't make sense
+ * to manage page tables in smaller pieces as nearly all mappings have that
+ * size.
+ *
+ * ######################################################################
+ *
+ *
+ * ######################################################################
+ *
+ * mmu_engage
+ * ----------
+ * Thanks to a small helping routine enabling the mmu got quite simple
+ * and there is only one way left. mmu_engage makes a complete a new mapping
+ * that only includes the absolute necessary to be able to jump to the final
+ * postion and to restore the original mapping.
+ * As this code doesn't need a transparent translation register anymore this
+ * means all registers are free to be used by machines that needs them for
+ * other purposes.
+ *
+ * ######################################################################
+ *
+ * mmu_print
+ * ---------
+ * This algorithm will print out the page tables of the system as
+ * appropriate for an 030 or an 040. This is useful for debugging purposes
+ * and as such is enclosed in #ifdef MMU_PRINT/#endif clauses.
+ *
+ * ######################################################################
+ *
+ * console_init
+ * ------------
+ * The console is also able to be turned off. The console in head.S
+ * is specifically for debugging and can be very useful. It is surrounded by
+ * #ifdef CONSOLE/#endif clauses so it doesn't have to ship in known-good
+ * kernels. It's basic algorithm is to determine the size of the screen
+ * (in height/width and bit depth) and then use that information for
+ * displaying an 8x8 font or an 8x16 (widthxheight). I prefer the 8x8 for
+ * debugging so I can see more good data. But it was trivial to add support
+ * for both fonts, so I included it.
+ * Also, the algorithm for plotting pixels is abstracted so that in
+ * theory other platforms could add support for different kinds of frame
+ * buffers. This could be very useful.
+ *
+ * console_put_penguin
+ * -------------------
+ * An important part of any Linux bring up is the penguin and there's
+ * nothing like getting the Penguin on the screen! This algorithm will work
+ * on any machine for which there is a console_plot_pixel.
+ *
+ * console_scroll
+ * --------------
+ * My hope is that the scroll algorithm does the right thing on the
+ * various platforms, but it wouldn't be hard to add the test conditions
+ * and new code if it doesn't.
+ *
+ * console_putc
+ * -------------
+ *
+ * ######################################################################
+ *
+ * Register usage has greatly simplified within head.S. Every subroutine
+ * saves and restores all registers that it modifies (except it returns a
+ * value in there of course). So the only register that needs to be initialized
+ * is the stack pointer.
+ * All other init code and data is now placed in the init section, so it will
+ * be automatically freed at the end of the kernel initialization.
+ *
+ * ######################################################################
+ *
+ * options
+ * -------
+ * There are many options available in a build of this file. I've
+ * taken the time to describe them here to save you the time of searching
+ * for them and trying to understand what they mean.
+ *
+ * CONFIG_xxx: These are the obvious machine configuration defines created
+ * during configuration. These are defined in include/linux/autoconf.h.
+ *
+ * CONSOLE: There is support for head.S console in this file. This
+ * console can talk to a Mac frame buffer, but could easily be extrapolated
+ * to extend it to support other platforms.
+ *
+ * TEST_MMU: This is a test harness for running on any given machine but
+ * getting an MMU dump for another class of machine. The classes of machines
+ * that can be tested are any of the makes (Atari, Amiga, Mac, VME, etc.)
+ * and any of the models (030, 040, 060, etc.).
+ *
+ * NOTE: TEST_MMU is NOT permanent! It is scheduled to be removed
+ * When head.S boots on Atari, Amiga, Macintosh, and VME
+ * machines. At that point the underlying logic will be
+ * believed to be solid enough to be trusted, and TEST_MMU
+ * can be dropped. Do note that that will clean up the
+ * head.S code significantly as large blocks of #if/#else
+ * clauses can be removed.
+ *
+ * MMU_NOCACHE_KERNEL: On the Macintosh platform there was an inquiry into
+ * determing why devices don't appear to work. A test case was to remove
+ * the cacheability of the kernel bits.
+ *
+ * MMU_PRINT: There is a routine built into head.S that can display the
+ * MMU data structures. It outputs its result through the serial_putc
+ * interface. So where ever that winds up driving data, that's where the
+ * mmu struct will appear. On the Macintosh that's typically the console.
+ *
+ * SERIAL_DEBUG: There are a series of putc() macro statements
+ * scattered through out the code to give progress of status to the
+ * person sitting at the console. This constant determines whether those
+ * are used.
+ *
+ * DEBUG: This is the standard DEBUG flag that can be set for building
+ * the kernel. It has the effect adding additional tests into
+ * the code.
+ *
+ * FONT_6x11:
+ * FONT_8x8:
+ * FONT_8x16:
+ * In theory these could be determined at run time or handed
+ * over by the booter. But, let's be real, it's a fine hard
+ * coded value. (But, you will notice the code is run-time
+ * flexible!) A pointer to the font's struct font_desc
+ * is kept locally in Lconsole_font. It is used to determine
+ * font size information dynamically.
+ *
+ * Atari constants:
+ * USE_PRINTER: Use the printer port for serial debug.
+ * USE_SCC_B: Use the SCC port A (Serial2) for serial debug.
+ * USE_SCC_A: Use the SCC port B (Modem2) for serial debug.
+ * USE_MFP: Use the ST-MFP port (Modem1) for serial debug.
+ *
+ * Macintosh constants:
+ * MAC_SERIAL_DEBUG: Turns on serial debug output for the Macintosh.
+ * MAC_USE_SCC_A: Use the SCC port A (modem) for serial debug.
+ * MAC_USE_SCC_B: Use the SCC port B (printer) for serial debug (default).
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/bootinfo.h>
+#include <asm/setup.h>
+#include <asm/entry.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/offsets.h>
+
+#ifdef CONFIG_MAC
+
+#include <asm/machw.h>
+
+/*
+ * Macintosh console support
+ */
+
+#define CONSOLE
+#define CONSOLE_PENGUIN
+
+/*
+ * Macintosh serial debug support; outputs boot info to the printer
+ * and/or modem serial ports
+ */
+#undef MAC_SERIAL_DEBUG
+
+/*
+ * Macintosh serial debug port selection; define one or both;
+ * requires MAC_SERIAL_DEBUG to be defined
+ */
+#define MAC_USE_SCC_A /* Macintosh modem serial port */
+#define MAC_USE_SCC_B /* Macintosh printer serial port */
+
+#endif /* CONFIG_MAC */
+
+#undef MMU_PRINT
+#undef MMU_NOCACHE_KERNEL
+#define SERIAL_DEBUG
+#undef DEBUG
+
+/*
+ * For the head.S console, there are three supported fonts, 6x11, 8x16 and 8x8.
+ * The 8x8 font is harder to read but fits more on the screen.
+ */
+#define FONT_8x8 /* default */
+/* #define FONT_8x16 */ /* 2nd choice */
+/* #define FONT_6x11 */ /* 3rd choice */
+
+.globl kernel_pg_dir
+.globl availmem
+.globl m68k_pgtable_cachemode
+.globl m68k_supervisor_cachemode
+#ifdef CONFIG_MVME16x
+.globl mvme_bdid
+#endif
+#ifdef CONFIG_Q40
+.globl q40_mem_cptr
+#endif
+
+CPUTYPE_040 = 1 /* indicates an 040 */
+CPUTYPE_060 = 2 /* indicates an 060 */
+CPUTYPE_0460 = 3 /* if either above are set, this is set */
+CPUTYPE_020 = 4 /* indicates an 020 */
+
+/* Translation control register */
+TC_ENABLE = 0x8000
+TC_PAGE8K = 0x4000
+TC_PAGE4K = 0x0000
+
+/* Transparent translation registers */
+TTR_ENABLE = 0x8000 /* enable transparent translation */
+TTR_ANYMODE = 0x4000 /* user and kernel mode access */
+TTR_KERNELMODE = 0x2000 /* only kernel mode access */
+TTR_USERMODE = 0x0000 /* only user mode access */
+TTR_CI = 0x0400 /* inhibit cache */
+TTR_RW = 0x0200 /* read/write mode */
+TTR_RWM = 0x0100 /* read/write mask */
+TTR_FCB2 = 0x0040 /* function code base bit 2 */
+TTR_FCB1 = 0x0020 /* function code base bit 1 */
+TTR_FCB0 = 0x0010 /* function code base bit 0 */
+TTR_FCM2 = 0x0004 /* function code mask bit 2 */
+TTR_FCM1 = 0x0002 /* function code mask bit 1 */
+TTR_FCM0 = 0x0001 /* function code mask bit 0 */
+
+/* Cache Control registers */
+CC6_ENABLE_D = 0x80000000 /* enable data cache (680[46]0) */
+CC6_FREEZE_D = 0x40000000 /* freeze data cache (68060) */
+CC6_ENABLE_SB = 0x20000000 /* enable store buffer (68060) */
+CC6_PUSH_DPI = 0x10000000 /* disable CPUSH invalidation (68060) */
+CC6_HALF_D = 0x08000000 /* half-cache mode for data cache (68060) */
+CC6_ENABLE_B = 0x00800000 /* enable branch cache (68060) */
+CC6_CLRA_B = 0x00400000 /* clear all entries in branch cache (68060) */
+CC6_CLRU_B = 0x00200000 /* clear user entries in branch cache (68060) */
+CC6_ENABLE_I = 0x00008000 /* enable instruction cache (680[46]0) */
+CC6_FREEZE_I = 0x00004000 /* freeze instruction cache (68060) */
+CC6_HALF_I = 0x00002000 /* half-cache mode for instruction cache (68060) */
+CC3_ALLOC_WRITE = 0x00002000 /* write allocate mode(68030) */
+CC3_ENABLE_DB = 0x00001000 /* enable data burst (68030) */
+CC3_CLR_D = 0x00000800 /* clear data cache (68030) */
+CC3_CLRE_D = 0x00000400 /* clear entry in data cache (68030) */
+CC3_FREEZE_D = 0x00000200 /* freeze data cache (68030) */
+CC3_ENABLE_D = 0x00000100 /* enable data cache (68030) */
+CC3_ENABLE_IB = 0x00000010 /* enable instruction burst (68030) */
+CC3_CLR_I = 0x00000008 /* clear instruction cache (68030) */
+CC3_CLRE_I = 0x00000004 /* clear entry in instruction cache (68030) */
+CC3_FREEZE_I = 0x00000002 /* freeze instruction cache (68030) */
+CC3_ENABLE_I = 0x00000001 /* enable instruction cache (68030) */
+
+/* Miscellaneous definitions */
+PAGESIZE = 4096
+PAGESHIFT = 12
+
+ROOT_TABLE_SIZE = 128
+PTR_TABLE_SIZE = 128
+PAGE_TABLE_SIZE = 64
+ROOT_INDEX_SHIFT = 25
+PTR_INDEX_SHIFT = 18
+PAGE_INDEX_SHIFT = 12
+
+#ifdef DEBUG
+/* When debugging use readable names for labels */
+#ifdef __STDC__
+#define L(name) .head.S.##name
+#else
+#define L(name) .head.S./**/name
+#endif
+#else
+#ifdef __STDC__
+#define L(name) .L##name
+#else
+#define L(name) .L/**/name
+#endif
+#endif
+
+/* The __INITDATA stuff is a no-op when ftrace or kgdb are turned on */
+#ifndef __INITDATA
+#define __INITDATA .data
+#define __FINIT .previous
+#endif
+
+/* Several macros to make the writing of subroutines easier:
+ * - func_start marks the beginning of the routine which setups the frame
+ * register and saves the registers, it also defines another macro
+ * to automatically restore the registers again.
+ * - func_return marks the end of the routine and simply calls the prepared
+ * macro to restore registers and jump back to the caller.
+ * - func_define generates another macro to automatically put arguments
+ * onto the stack call the subroutine and cleanup the stack again.
+ */
+
+/* Within subroutines these macros can be used to access the arguments
+ * on the stack. With STACK some allocated memory on the stack can be
+ * accessed and ARG0 points to the return address (used by mmu_engage).
+ */
+#define STACK %a6@(stackstart)
+#define ARG0 %a6@(4)
+#define ARG1 %a6@(8)
+#define ARG2 %a6@(12)
+#define ARG3 %a6@(16)
+#define ARG4 %a6@(20)
+
+.macro func_start name,saveregs,stack=0
+L(\name):
+ linkw %a6,#-\stack
+ moveml \saveregs,%sp@-
+.set stackstart,-\stack
+
+.macro func_return_\name
+ moveml %sp@+,\saveregs
+ unlk %a6
+ rts
+.endm
+.endm
+
+.macro func_return name
+ func_return_\name
+.endm
+
+.macro func_call name
+ jbsr L(\name)
+.endm
+
+.macro move_stack nr,arg1,arg2,arg3,arg4
+.if \nr
+ move_stack "(\nr-1)",\arg2,\arg3,\arg4
+ movel \arg1,%sp@-
+.endif
+.endm
+
+.macro func_define name,nr=0
+.macro \name arg1,arg2,arg3,arg4
+ move_stack \nr,\arg1,\arg2,\arg3,\arg4
+ func_call \name
+.if \nr
+ lea %sp@(\nr*4),%sp
+.endif
+.endm
+.endm
+
+func_define mmu_map,4
+func_define mmu_map_tt,4
+func_define mmu_fixup_page_mmu_cache,1
+func_define mmu_temp_map,2
+func_define mmu_engage
+func_define mmu_get_root_table_entry,1
+func_define mmu_get_ptr_table_entry,2
+func_define mmu_get_page_table_entry,2
+func_define mmu_print
+func_define get_new_page
+#if defined(CONFIG_HP300) || defined(CONFIG_APOLLO)
+func_define set_leds
+#endif
+
+.macro mmu_map_eq arg1,arg2,arg3
+ mmu_map \arg1,\arg1,\arg2,\arg3
+.endm
+
+.macro get_bi_record record
+ pea \record
+ func_call get_bi_record
+ addql #4,%sp
+.endm
+
+func_define serial_putc,1
+func_define console_putc,1
+
+func_define console_init
+func_define console_put_stats
+func_define console_put_penguin
+func_define console_plot_pixel,3
+func_define console_scroll
+
+.macro putc ch
+#if defined(CONSOLE) || defined(SERIAL_DEBUG)
+ pea \ch
+#endif
+#ifdef CONSOLE
+ func_call console_putc
+#endif
+#ifdef SERIAL_DEBUG
+ func_call serial_putc
+#endif
+#if defined(CONSOLE) || defined(SERIAL_DEBUG)
+ addql #4,%sp
+#endif
+.endm
+
+.macro dputc ch
+#ifdef DEBUG
+ putc \ch
+#endif
+.endm
+
+func_define putn,1
+
+.macro dputn nr
+#ifdef DEBUG
+ putn \nr
+#endif
+.endm
+
+.macro puts string
+#if defined(CONSOLE) || defined(SERIAL_DEBUG)
+ __INITDATA
+.Lstr\@:
+ .string "\string"
+ __FINIT
+ pea %pc@(.Lstr\@)
+ func_call puts
+ addql #4,%sp
+#endif
+.endm
+
+.macro dputs string
+#ifdef DEBUG
+ puts "\string"
+#endif
+.endm
+
+#define is_not_amiga(lab) cmpl &MACH_AMIGA,%pc@(m68k_machtype); jne lab
+#define is_not_atari(lab) cmpl &MACH_ATARI,%pc@(m68k_machtype); jne lab
+#define is_not_mac(lab) cmpl &MACH_MAC,%pc@(m68k_machtype); jne lab
+#define is_not_mvme147(lab) cmpl &MACH_MVME147,%pc@(m68k_machtype); jne lab
+#define is_not_mvme16x(lab) cmpl &MACH_MVME16x,%pc@(m68k_machtype); jne lab
+#define is_not_bvme6000(lab) cmpl &MACH_BVME6000,%pc@(m68k_machtype); jne lab
+#define is_mvme147(lab) cmpl &MACH_MVME147,%pc@(m68k_machtype); jeq lab
+#define is_mvme16x(lab) cmpl &MACH_MVME16x,%pc@(m68k_machtype); jeq lab
+#define is_bvme6000(lab) cmpl &MACH_BVME6000,%pc@(m68k_machtype); jeq lab
+#define is_not_hp300(lab) cmpl &MACH_HP300,%pc@(m68k_machtype); jne lab
+#define is_not_apollo(lab) cmpl &MACH_APOLLO,%pc@(m68k_machtype); jne lab
+#define is_not_q40(lab) cmpl &MACH_Q40,%pc@(m68k_machtype); jne lab
+#define is_not_sun3x(lab) cmpl &MACH_SUN3X,%pc@(m68k_machtype); jne lab
+
+#define hasnt_leds(lab) cmpl &MACH_HP300,%pc@(m68k_machtype); \
+ jeq 42f; \
+ cmpl &MACH_APOLLO,%pc@(m68k_machtype); \
+ jne lab ;\
+ 42:\
+
+#define is_040_or_060(lab) btst &CPUTYPE_0460,%pc@(L(cputype)+3); jne lab
+#define is_not_040_or_060(lab) btst &CPUTYPE_0460,%pc@(L(cputype)+3); jeq lab
+#define is_040(lab) btst &CPUTYPE_040,%pc@(L(cputype)+3); jne lab
+#define is_060(lab) btst &CPUTYPE_060,%pc@(L(cputype)+3); jne lab
+#define is_not_060(lab) btst &CPUTYPE_060,%pc@(L(cputype)+3); jeq lab
+#define is_020(lab) btst &CPUTYPE_020,%pc@(L(cputype)+3); jne lab
+#define is_not_020(lab) btst &CPUTYPE_020,%pc@(L(cputype)+3); jeq lab
+
+/* On the HP300 we use the on-board LEDs for debug output before
+ the console is running. Writing a 1 bit turns the corresponding LED
+ _off_ - on the 340 bit 7 is towards the back panel of the machine. */
+.macro leds mask
+#if defined(CONFIG_HP300) || defined(CONFIG_APOLLO)
+ hasnt_leds(.Lled\@)
+ pea \mask
+ func_call set_leds
+ addql #4,%sp
+.Lled\@:
+#endif
+.endm
+
+.text
+ENTRY(_stext)
+/*
+ * Version numbers of the bootinfo interface
+ * The area from _stext to _start will later be used as kernel pointer table
+ */
+ bras 1f /* Jump over bootinfo version numbers */
+
+ .long BOOTINFOV_MAGIC
+ .long MACH_AMIGA, AMIGA_BOOTI_VERSION
+ .long MACH_ATARI, ATARI_BOOTI_VERSION
+ .long MACH_MVME147, MVME147_BOOTI_VERSION
+ .long MACH_MVME16x, MVME16x_BOOTI_VERSION
+ .long MACH_BVME6000, BVME6000_BOOTI_VERSION
+ .long MACH_MAC, MAC_BOOTI_VERSION
+ .long MACH_Q40, Q40_BOOTI_VERSION
+ .long MACH_HP300, HP300_BOOTI_VERSION
+ .long 0
+1: jra __start
+
+.equ kernel_pg_dir,_stext
+
+.equ .,_stext+PAGESIZE
+
+ENTRY(_start)
+ jra __start
+__INIT
+ENTRY(__start)
+/*
+ * Setup initial stack pointer
+ */
+ lea %pc@(_stext),%sp
+
+/*
+ * Record the CPU and machine type.
+ */
+ get_bi_record BI_MACHTYPE
+ lea %pc@(m68k_machtype),%a1
+ movel %a0@,%a1@
+
+ get_bi_record BI_FPUTYPE
+ lea %pc@(m68k_fputype),%a1
+ movel %a0@,%a1@
+
+ get_bi_record BI_MMUTYPE
+ lea %pc@(m68k_mmutype),%a1
+ movel %a0@,%a1@
+
+ get_bi_record BI_CPUTYPE
+ lea %pc@(m68k_cputype),%a1
+ movel %a0@,%a1@
+
+ leds 0x1
+
+#ifdef CONFIG_MAC
+/*
+ * For Macintosh, we need to determine the display parameters early (at least
+ * while debugging it).
+ */
+
+ is_not_mac(L(test_notmac))
+
+ get_bi_record BI_MAC_VADDR
+ lea %pc@(L(mac_videobase)),%a1
+ movel %a0@,%a1@
+
+ get_bi_record BI_MAC_VDEPTH
+ lea %pc@(L(mac_videodepth)),%a1
+ movel %a0@,%a1@
+
+ get_bi_record BI_MAC_VDIM
+ lea %pc@(L(mac_dimensions)),%a1
+ movel %a0@,%a1@
+
+ get_bi_record BI_MAC_VROW
+ lea %pc@(L(mac_rowbytes)),%a1
+ movel %a0@,%a1@
+
+#ifdef MAC_SERIAL_DEBUG
+ get_bi_record BI_MAC_SCCBASE
+ lea %pc@(L(mac_sccbase)),%a1
+ movel %a0@,%a1@
+#endif /* MAC_SERIAL_DEBUG */
+
+#if 0
+ /*
+ * Clear the screen
+ */
+ lea %pc@(L(mac_videobase)),%a0
+ movel %a0@,%a1
+ lea %pc@(L(mac_dimensions)),%a0
+ movel %a0@,%d1
+ swap %d1 /* #rows is high bytes */
+ andl #0xFFFF,%d1 /* rows */
+ subl #10,%d1
+ lea %pc@(L(mac_rowbytes)),%a0
+loopy2:
+ movel %a0@,%d0
+ subql #1,%d0
+loopx2:
+ moveb #0x55, %a1@+
+ dbra %d0,loopx2
+ dbra %d1,loopy2
+#endif
+
+L(test_notmac):
+#endif /* CONFIG_MAC */
+
+
+/*
+ * There are ultimately two pieces of information we want for all kinds of
+ * processors CpuType and CacheBits. The CPUTYPE was passed in from booter
+ * and is converted here from a booter type definition to a separate bit
+ * number which allows for the standard is_0x0 macro tests.
+ */
+ movel %pc@(m68k_cputype),%d0
+ /*
+ * Assume it's an 030
+ */
+ clrl %d1
+
+ /*
+ * Test the BootInfo cputype for 060
+ */
+ btst #CPUB_68060,%d0
+ jeq 1f
+ bset #CPUTYPE_060,%d1
+ bset #CPUTYPE_0460,%d1
+ jra 3f
+1:
+ /*
+ * Test the BootInfo cputype for 040
+ */
+ btst #CPUB_68040,%d0
+ jeq 2f
+ bset #CPUTYPE_040,%d1
+ bset #CPUTYPE_0460,%d1
+ jra 3f
+2:
+ /*
+ * Test the BootInfo cputype for 020
+ */
+ btst #CPUB_68020,%d0
+ jeq 3f
+ bset #CPUTYPE_020,%d1
+ jra 3f
+3:
+ /*
+ * Record the cpu type
+ */
+ lea %pc@(L(cputype)),%a0
+ movel %d1,%a0@
+
+ /*
+ * NOTE:
+ *
+ * Now the macros are valid:
+ * is_040_or_060
+ * is_not_040_or_060
+ * is_040
+ * is_060
+ * is_not_060
+ */
+
+ /*
+ * Determine the cache mode for pages holding MMU tables
+ * and for supervisor mode, unused for '020 and '030
+ */
+ clrl %d0
+ clrl %d1
+
+ is_not_040_or_060(L(save_cachetype))
+
+ /*
+ * '040 or '060
+ * d1 := cacheable write-through
+ * NOTE: The 68040 manual strongly recommends non-cached for MMU tables,
+ * but we have been using write-through since at least 2.0.29 so I
+ * guess it is OK.
+ */
+#ifdef CONFIG_060_WRITETHROUGH
+ /*
+ * If this is a 68060 board using drivers with cache coherency
+ * problems, then supervisor memory accesses need to be write-through
+ * also; otherwise, we want copyback.
+ */
+
+ is_not_060(1f)
+ movel #_PAGE_CACHE040W,%d0
+ jra L(save_cachetype)
+#endif /* CONFIG_060_WRITETHROUGH */
+1:
+ movew #_PAGE_CACHE040,%d0
+
+ movel #_PAGE_CACHE040W,%d1
+
+L(save_cachetype):
+ /* Save cache mode for supervisor mode and page tables
+ */
+ lea %pc@(m68k_supervisor_cachemode),%a0
+ movel %d0,%a0@
+ lea %pc@(m68k_pgtable_cachemode),%a0
+ movel %d1,%a0@
+
+/*
+ * raise interrupt level
+ */
+ movew #0x2700,%sr
+
+/*
+ If running on an Atari, determine the I/O base of the
+ serial port and test if we are running on a Medusa or Hades.
+ This test is necessary here, because on the Hades the serial
+ port is only accessible in the high I/O memory area.
+
+ The test whether it is a Medusa is done by writing to the byte at
+ phys. 0x0. This should result in a bus error on all other machines.
+
+ ...should, but doesn't. The Afterburner040 for the Falcon has the
+ same behaviour (0x0..0x7 are no ROM shadow). So we have to do
+ another test to distinguish Medusa and AB040. This is a
+ read attempt for 0x00ff82fe phys. that should bus error on a Falcon
+ (+AB040), but is in the range where the Medusa always asserts DTACK.
+
+ The test for the Hades is done by reading address 0xb0000000. This
+ should give a bus error on the Medusa.
+ */
+
+#ifdef CONFIG_ATARI
+ is_not_atari(L(notypetest))
+
+ /* get special machine type (Medusa/Hades/AB40) */
+ moveq #0,%d3 /* default if tag doesn't exist */
+ get_bi_record BI_ATARI_MCH_TYPE
+ tstl %d0
+ jbmi 1f
+ movel %a0@,%d3
+ lea %pc@(atari_mch_type),%a0
+ movel %d3,%a0@
+1:
+ /* On the Hades, the iobase must be set up before opening the
+ * serial port. There are no I/O regs at 0x00ffxxxx at all. */
+ moveq #0,%d0
+ cmpl #ATARI_MACH_HADES,%d3
+ jbne 1f
+ movel #0xff000000,%d0 /* Hades I/O base addr: 0xff000000 */
+1: lea %pc@(L(iobase)),%a0
+ movel %d0,%a0@
+
+L(notypetest):
+#endif
+
+#ifdef CONFIG_VME
+ is_mvme147(L(getvmetype))
+ is_bvme6000(L(getvmetype))
+ is_not_mvme16x(L(gvtdone))
+
+ /* See if the loader has specified the BI_VME_TYPE tag. Recent
+ * versions of VMELILO and TFTPLILO do this. We have to do this
+ * early so we know how to handle console output. If the tag
+ * doesn't exist then we use the Bug for output on MVME16x.
+ */
+L(getvmetype):
+ get_bi_record BI_VME_TYPE
+ tstl %d0
+ jbmi 1f
+ movel %a0@,%d3
+ lea %pc@(vme_brdtype),%a0
+ movel %d3,%a0@
+1:
+#ifdef CONFIG_MVME16x
+ is_not_mvme16x(L(gvtdone))
+
+ /* Need to get the BRD_ID info to differentiate between 162, 167,
+ * etc. This is available as a BI_VME_BRDINFO tag with later
+ * versions of VMELILO and TFTPLILO, otherwise we call the Bug.
+ */
+ get_bi_record BI_VME_BRDINFO
+ tstl %d0
+ jpl 1f
+
+ /* Get pointer to board ID data from Bug */
+ movel %d2,%sp@-
+ trap #15
+ .word 0x70 /* trap 0x70 - .BRD_ID */
+ movel %sp@+,%a0
+1:
+ lea %pc@(mvme_bdid),%a1
+ /* Structure is 32 bytes long */
+ movel %a0@+,%a1@+
+ movel %a0@+,%a1@+
+ movel %a0@+,%a1@+
+ movel %a0@+,%a1@+
+ movel %a0@+,%a1@+
+ movel %a0@+,%a1@+
+ movel %a0@+,%a1@+
+ movel %a0@+,%a1@+
+#endif
+
+L(gvtdone):
+
+#endif
+
+#ifdef CONFIG_HP300
+ is_not_hp300(L(nothp))
+
+ /* Get the address of the UART for serial debugging */
+ get_bi_record BI_HP300_UART_ADDR
+ tstl %d0
+ jbmi 1f
+ movel %a0@,%d3
+ lea %pc@(L(uartbase)),%a0
+ movel %d3,%a0@
+ get_bi_record BI_HP300_UART_SCODE
+ tstl %d0
+ jbmi 1f
+ movel %a0@,%d3
+ lea %pc@(L(uart_scode)),%a0
+ movel %d3,%a0@
+1:
+L(nothp):
+#endif
+
+/*
+ * Initialize serial port
+ */
+ jbsr L(serial_init)
+
+/*
+ * Initialize console
+ */
+#ifdef CONFIG_MAC
+ is_not_mac(L(nocon))
+#ifdef CONSOLE
+ console_init
+#ifdef CONSOLE_PENGUIN
+ console_put_penguin
+#endif /* CONSOLE_PENGUIN */
+ console_put_stats
+#endif /* CONSOLE */
+L(nocon):
+#endif /* CONFIG_MAC */
+
+
+ putc '\n'
+ putc 'A'
+ leds 0x2
+ dputn %pc@(L(cputype))
+ dputn %pc@(m68k_supervisor_cachemode)
+ dputn %pc@(m68k_pgtable_cachemode)
+ dputc '\n'
+
+/*
+ * Save physical start address of kernel
+ */
+ lea %pc@(L(phys_kernel_start)),%a0
+ lea %pc@(_stext),%a1
+ subl #_stext,%a1
+ addl #PAGE_OFFSET,%a1
+ movel %a1,%a0@
+
+ putc 'B'
+
+ leds 0x4
+
+/*
+ * mmu_init
+ *
+ * This block of code does what's necessary to map in the various kinds
+ * of machines for execution of Linux.
+ * First map the first 4 MB of kernel code & data
+ */
+
+ mmu_map #PAGE_OFFSET,%pc@(L(phys_kernel_start)),#4*1024*1024,\
+ %pc@(m68k_supervisor_cachemode)
+
+ putc 'C'
+
+#ifdef CONFIG_AMIGA
+
+L(mmu_init_amiga):
+
+ is_not_amiga(L(mmu_init_not_amiga))
+/*
+ * mmu_init_amiga
+ */
+
+ putc 'D'
+
+ is_not_040_or_060(1f)
+
+ /*
+ * 040: Map the 16Meg range physical 0x0 upto logical 0x8000.0000
+ */
+ mmu_map #0x80000000,#0,#0x01000000,#_PAGE_NOCACHE_S
+ /*
+ * Map the Zorro III I/O space with transparent translation
+ * for frame buffer memory etc.
+ */
+ mmu_map_tt #1,#0x40000000,#0x20000000,#_PAGE_NOCACHE_S
+
+ jbra L(mmu_init_done)
+
+1:
+ /*
+ * 030: Map the 32Meg range physical 0x0 upto logical 0x8000.0000
+ */
+ mmu_map #0x80000000,#0,#0x02000000,#_PAGE_NOCACHE030
+ mmu_map_tt #1,#0x40000000,#0x20000000,#_PAGE_NOCACHE030
+
+ jbra L(mmu_init_done)
+
+L(mmu_init_not_amiga):
+#endif
+
+#ifdef CONFIG_ATARI
+
+L(mmu_init_atari):
+
+ is_not_atari(L(mmu_init_not_atari))
+
+ putc 'E'
+
+/* On the Atari, we map the I/O region (phys. 0x00ffxxxx) by mapping
+ the last 16 MB of virtual address space to the first 16 MB (i.e.
+ 0xffxxxxxx -> 0x00xxxxxx). For this, an additional pointer table is
+ needed. I/O ranges are marked non-cachable.
+
+ For the Medusa it is better to map the I/O region transparently
+ (i.e. 0xffxxxxxx -> 0xffxxxxxx), because some I/O registers are
+ accessible only in the high area.
+
+ On the Hades all I/O registers are only accessible in the high
+ area.
+*/
+
+ /* I/O base addr for non-Medusa, non-Hades: 0x00000000 */
+ moveq #0,%d0
+ movel %pc@(atari_mch_type),%d3
+ cmpl #ATARI_MACH_MEDUSA,%d3
+ jbeq 2f
+ cmpl #ATARI_MACH_HADES,%d3
+ jbne 1f
+2: movel #0xff000000,%d0 /* Medusa/Hades base addr: 0xff000000 */
+1: movel %d0,%d3
+
+ is_040_or_060(L(spata68040))
+
+ /* Map everything non-cacheable, though not all parts really
+ * need to disable caches (crucial only for 0xff8000..0xffffff
+ * (standard I/O) and 0xf00000..0xf3ffff (IDE)). The remainder
+ * isn't really used, except for sometimes peeking into the
+ * ROMs (mirror at phys. 0x0), so caching isn't necessary for
+ * this. */
+ mmu_map #0xff000000,%d3,#0x01000000,#_PAGE_NOCACHE030
+
+ jbra L(mmu_init_done)
+
+L(spata68040):
+
+ mmu_map #0xff000000,%d3,#0x01000000,#_PAGE_NOCACHE_S
+
+ jbra L(mmu_init_done)
+
+L(mmu_init_not_atari):
+#endif
+
+#ifdef CONFIG_Q40
+ is_not_q40(L(notq40))
+ /*
+ * add transparent mapping for 0xff00 0000 - 0xffff ffff
+ * non-cached serialized etc..
+ * this includes master chip, DAC, RTC and ISA ports
+ * 0xfe000000-0xfeffffff is for screen and ROM
+ */
+
+ putc 'Q'
+
+ mmu_map_tt #0,#0xfe000000,#0x01000000,#_PAGE_CACHE040W
+ mmu_map_tt #1,#0xff000000,#0x01000000,#_PAGE_NOCACHE_S
+
+ jbra L(mmu_init_done)
+
+L(notq40):
+#endif
+
+#ifdef CONFIG_HP300
+ is_not_hp300(L(nothp300))
+
+ /* On the HP300, we map the ROM, INTIO and DIO regions (phys. 0x00xxxxxx)
+ * by mapping 32MB (on 020/030) or 16 MB (on 040) from 0xf0xxxxxx -> 0x00xxxxxx).
+ * The ROM mapping is needed because the LEDs are mapped there too.
+ */
+
+ is_040(1f)
+
+ /*
+ * 030: Map the 32Meg range physical 0x0 upto logical 0xf000.0000
+ */
+ mmu_map #0xf0000000,#0,#0x02000000,#_PAGE_NOCACHE030
+
+ jbra L(mmu_init_done)
+
+1:
+ /*
+ * 040: Map the 16Meg range physical 0x0 upto logical 0xf000.0000
+ */
+ mmu_map #0xf0000000,#0,#0x01000000,#_PAGE_NOCACHE_S
+
+ jbra L(mmu_init_done)
+
+L(nothp300):
+#endif /* CONFIG_HP300 */
+
+#ifdef CONFIG_MVME147
+
+ is_not_mvme147(L(not147))
+
+ /*
+ * On MVME147 we have already created kernel page tables for
+ * 4MB of RAM at address 0, so now need to do a transparent
+ * mapping of the top of memory space. Make it 0.5GByte for now,
+ * so we can access on-board i/o areas.
+ */
+
+ mmu_map_tt #1,#0xe0000000,#0x20000000,#_PAGE_NOCACHE030
+
+ jbra L(mmu_init_done)
+
+L(not147):
+#endif /* CONFIG_MVME147 */
+
+#ifdef CONFIG_MVME16x
+
+ is_not_mvme16x(L(not16x))
+
+ /*
+ * On MVME16x we have already created kernel page tables for
+ * 4MB of RAM at address 0, so now need to do a transparent
+ * mapping of the top of memory space. Make it 0.5GByte for now.
+ * Supervisor only access, so transparent mapping doesn't
+ * clash with User code virtual address space.
+ * this covers IO devices, PROM and SRAM. The PROM and SRAM
+ * mapping is needed to allow 167Bug to run.
+ * IO is in the range 0xfff00000 to 0xfffeffff.
+ * PROM is 0xff800000->0xffbfffff and SRAM is
+ * 0xffe00000->0xffe1ffff.
+ */
+
+ mmu_map_tt #1,#0xe0000000,#0x20000000,#_PAGE_NOCACHE_S
+
+ jbra L(mmu_init_done)
+
+L(not16x):
+#endif /* CONFIG_MVME162 | CONFIG_MVME167 */
+
+#ifdef CONFIG_BVME6000
+
+ is_not_bvme6000(L(not6000))
+
+ /*
+ * On BVME6000 we have already created kernel page tables for
+ * 4MB of RAM at address 0, so now need to do a transparent
+ * mapping of the top of memory space. Make it 0.5GByte for now,
+ * so we can access on-board i/o areas.
+ * Supervisor only access, so transparent mapping doesn't
+ * clash with User code virtual address space.
+ */
+
+ mmu_map_tt #1,#0xe0000000,#0x20000000,#_PAGE_NOCACHE_S
+
+ jbra L(mmu_init_done)
+
+L(not6000):
+#endif /* CONFIG_BVME6000 */
+
+/*
+ * mmu_init_mac
+ *
+ * The Macintosh mappings are less clear.
+ *
+ * Even as of this writing, it is unclear how the
+ * Macintosh mappings will be done. However, as
+ * the first author of this code I'm proposing the
+ * following model:
+ *
+ * Map the kernel (that's already done),
+ * Map the I/O (on most machines that's the
+ * 0x5000.0000 ... 0x5300.0000 range,
+ * Map the video frame buffer using as few pages
+ * as absolutely (this requirement mostly stems from
+ * the fact that when the frame buffer is at
+ * 0x0000.0000 then we know there is valid RAM just
+ * above the screen that we don't want to waste!).
+ *
+ * By the way, if the frame buffer is at 0x0000.0000
+ * then the Macintosh is known as an RBV based Mac.
+ *
+ * By the way 2, the code currently maps in a bunch of
+ * regions. But I'd like to cut that out. (And move most
+ * of the mappings up into the kernel proper ... or only
+ * map what's necessary.)
+ */
+
+#ifdef CONFIG_MAC
+
+L(mmu_init_mac):
+
+ is_not_mac(L(mmu_init_not_mac))
+
+ putc 'F'
+
+ is_not_040_or_060(1f)
+
+ moveq #_PAGE_NOCACHE_S,%d3
+ jbra 2f
+1:
+ moveq #_PAGE_NOCACHE030,%d3
+2:
+ /*
+ * Mac Note: screen address of logical 0xF000.0000 -> <screen physical>
+ * we simply map the 4MB that contains the videomem
+ */
+
+ movel #VIDEOMEMMASK,%d0
+ andl %pc@(L(mac_videobase)),%d0
+
+ mmu_map #VIDEOMEMBASE,%d0,#VIDEOMEMSIZE,%d3
+ /* ROM from 4000 0000 to 4200 0000 (only for mac_reset()) */
+ mmu_map_eq #0x40000000,#0x02000000,%d3
+ /* IO devices (incl. serial port) from 5000 0000 to 5300 0000 */
+ mmu_map_eq #0x50000000,#0x03000000,%d3
+ /* Nubus slot space (video at 0xF0000000, rom at 0xF0F80000) */
+ mmu_map_tt #1,#0xf8000000,#0x08000000,%d3
+
+ jbra L(mmu_init_done)
+
+L(mmu_init_not_mac):
+#endif
+
+#ifdef CONFIG_SUN3X
+ is_not_sun3x(L(notsun3x))
+
+ /* oh, the pain.. We're gonna want the prom code after
+ * starting the MMU, so we copy the mappings, translating
+ * from 8k -> 4k pages as we go.
+ */
+
+ /* copy maps from 0xfee00000 to 0xff000000 */
+ movel #0xfee00000, %d0
+ moveq #ROOT_INDEX_SHIFT, %d1
+ lsrl %d1,%d0
+ mmu_get_root_table_entry %d0
+
+ movel #0xfee00000, %d0
+ moveq #PTR_INDEX_SHIFT, %d1
+ lsrl %d1,%d0
+ andl #PTR_TABLE_SIZE-1, %d0
+ mmu_get_ptr_table_entry %a0,%d0
+
+ movel #0xfee00000, %d0
+ moveq #PAGE_INDEX_SHIFT, %d1
+ lsrl %d1,%d0
+ andl #PAGE_TABLE_SIZE-1, %d0
+ mmu_get_page_table_entry %a0,%d0
+
+ /* this is where the prom page table lives */
+ movel 0xfefe00d4, %a1
+ movel %a1@, %a1
+
+ movel #((0x200000 >> 13)-1), %d1
+
+1:
+ movel %a1@+, %d3
+ movel %d3,%a0@+
+ addl #0x1000,%d3
+ movel %d3,%a0@+
+
+ dbra %d1,1b
+
+ /* setup tt1 for I/O */
+ mmu_map_tt #1,#0x40000000,#0x40000000,#_PAGE_NOCACHE_S
+ jbra L(mmu_init_done)
+
+L(notsun3x):
+#endif
+
+#ifdef CONFIG_APOLLO
+ is_not_apollo(L(notapollo))
+
+ putc 'P'
+ mmu_map #0x80000000,#0,#0x02000000,#_PAGE_NOCACHE030
+
+L(notapollo):
+ jbra L(mmu_init_done)
+#endif
+
+L(mmu_init_done):
+
+ putc 'G'
+ leds 0x8
+
+/*
+ * mmu_fixup
+ *
+ * On the 040 class machines, all pages that are used for the
+ * mmu have to be fixed up. According to Motorola, pages holding mmu
+ * tables should be non-cacheable on a '040 and write-through on a
+ * '060. But analysis of the reasons for this, and practical
+ * experience, showed that write-through also works on a '040.
+ *
+ * Allocated memory so far goes from kernel_end to memory_start that
+ * is used for all kind of tables, for that the cache attributes
+ * are now fixed.
+ */
+L(mmu_fixup):
+
+ is_not_040_or_060(L(mmu_fixup_done))
+
+#ifdef MMU_NOCACHE_KERNEL
+ jbra L(mmu_fixup_done)
+#endif
+
+ /* first fix the page at the start of the kernel, that
+ * contains also kernel_pg_dir.
+ */
+ movel %pc@(L(phys_kernel_start)),%d0
+ subl #PAGE_OFFSET,%d0
+ lea %pc@(_stext),%a0
+ subl %d0,%a0
+ mmu_fixup_page_mmu_cache %a0
+
+ movel %pc@(L(kernel_end)),%a0
+ subl %d0,%a0
+ movel %pc@(L(memory_start)),%a1
+ subl %d0,%a1
+ bra 2f
+1:
+ mmu_fixup_page_mmu_cache %a0
+ addw #PAGESIZE,%a0
+2:
+ cmpl %a0,%a1
+ jgt 1b
+
+L(mmu_fixup_done):
+
+#ifdef MMU_PRINT
+ mmu_print
+#endif
+
+/*
+ * mmu_engage
+ *
+ * This chunk of code performs the gruesome task of engaging the MMU.
+ * The reason its gruesome is because when the MMU becomes engaged it
+ * maps logical addresses to physical addresses. The Program Counter
+ * register is then passed through the MMU before the next instruction
+ * is fetched (the instruction following the engage MMU instruction).
+ * This may mean one of two things:
+ * 1. The Program Counter falls within the logical address space of
+ * the kernel of which there are two sub-possibilities:
+ * A. The PC maps to the correct instruction (logical PC == physical
+ * code location), or
+ * B. The PC does not map through and the processor will read some
+ * data (or instruction) which is not the logically next instr.
+ * As you can imagine, A is good and B is bad.
+ * Alternatively,
+ * 2. The Program Counter does not map through the MMU. The processor
+ * will take a Bus Error.
+ * Clearly, 2 is bad.
+ * It doesn't take a wiz kid to figure you want 1.A.
+ * This code creates that possibility.
+ * There are two possible 1.A. states (we now ignore the other above states):
+ * A. The kernel is located at physical memory addressed the same as
+ * the logical memory for the kernel, i.e., 0x01000.
+ * B. The kernel is located some where else. e.g., 0x0400.0000
+ *
+ * Under some conditions the Macintosh can look like A or B.
+ * [A friend and I once noted that Apple hardware engineers should be
+ * wacked twice each day: once when they show up at work (as in, Whack!,
+ * "This is for the screwy hardware we know you're going to design today."),
+ * and also at the end of the day (as in, Whack! "I don't know what
+ * you designed today, but I'm sure it wasn't good."). -- rst]
+ *
+ * This code works on the following premise:
+ * If the kernel start (%d5) is within the first 16 Meg of RAM,
+ * then create a mapping for the kernel at logical 0x8000.0000 to
+ * the physical location of the pc. And, create a transparent
+ * translation register for the first 16 Meg. Then, after the MMU
+ * is engaged, the PC can be moved up into the 0x8000.0000 range
+ * and then the transparent translation can be turned off and then
+ * the PC can jump to the correct logical location and it will be
+ * home (finally). This is essentially the code that the Amiga used
+ * to use. Now, it's generalized for all processors. Which means
+ * that a fresh (but temporary) mapping has to be created. The mapping
+ * is made in page 0 (an as of yet unused location -- except for the
+ * stack!). This temporary mapping will only require 1 pointer table
+ * and a single page table (it can map 256K).
+ *
+ * OK, alternatively, imagine that the Program Counter is not within
+ * the first 16 Meg. Then, just use Transparent Translation registers
+ * to do the right thing.
+ *
+ * Last, if _start is already at 0x01000, then there's nothing special
+ * to do (in other words, in a degenerate case of the first case above,
+ * do nothing).
+ *
+ * Let's do it.
+ *
+ *
+ */
+
+ putc 'H'
+
+ mmu_engage
+
+/*
+ * After this point no new memory is allocated and
+ * the start of available memory is stored in availmem.
+ * (The bootmem allocator requires now the physicall address.)
+ */
+
+ movel L(memory_start),availmem
+
+#ifdef CONFIG_AMIGA
+ is_not_amiga(1f)
+ /* fixup the Amiga custom register location before printing */
+ clrl L(custom)
+1:
+#endif
+
+#ifdef CONFIG_ATARI
+ is_not_atari(1f)
+ /* fixup the Atari iobase register location before printing */
+ movel #0xff000000,L(iobase)
+1:
+#endif
+
+#ifdef CONFIG_MAC
+ is_not_mac(1f)
+ movel #~VIDEOMEMMASK,%d0
+ andl L(mac_videobase),%d0
+ addl #VIDEOMEMBASE,%d0
+ movel %d0,L(mac_videobase)
+#if defined(CONSOLE)
+ movel %pc@(L(phys_kernel_start)),%d0
+ subl #PAGE_OFFSET,%d0
+ subl %d0,L(console_font)
+ subl %d0,L(console_font_data)
+#endif
+#ifdef MAC_SERIAL_DEBUG
+ orl #0x50000000,L(mac_sccbase)
+#endif
+1:
+#endif
+
+#ifdef CONFIG_HP300
+ is_not_hp300(1f)
+ /*
+ * Fix up the iobase register to point to the new location of the LEDs.
+ */
+ movel #0xf0000000,L(iobase)
+
+ /*
+ * Energise the FPU and caches.
+ */
+ is_040(1f)
+ movel #0x60,0xf05f400c
+ jbra 2f
+
+ /*
+ * 040: slightly different, apparently.
+ */
+1: movew #0,0xf05f400e
+ movew #0x64,0xf05f400e
+2:
+#endif
+
+#ifdef CONFIG_SUN3X
+ is_not_sun3x(1f)
+
+ /* enable copro */
+ oriw #0x4000,0x61000000
+1:
+#endif
+
+#ifdef CONFIG_APOLLO
+ is_not_apollo(1f)
+
+ /*
+ * Fix up the iobase before printing
+ */
+ movel #0x80000000,L(iobase)
+1:
+#endif
+
+ putc 'I'
+ leds 0x10
+
+/*
+ * Enable caches
+ */
+
+ is_not_040_or_060(L(cache_not_680460))
+
+L(cache680460):
+ .chip 68040
+ nop
+ cpusha %bc
+ nop
+
+ is_060(L(cache68060))
+
+ movel #CC6_ENABLE_D+CC6_ENABLE_I,%d0
+ /* MMU stuff works in copyback mode now, so enable the cache */
+ movec %d0,%cacr
+ jra L(cache_done)
+
+L(cache68060):
+ movel #CC6_ENABLE_D+CC6_ENABLE_I+CC6_ENABLE_SB+CC6_PUSH_DPI+CC6_ENABLE_B+CC6_CLRA_B,%d0
+ /* MMU stuff works in copyback mode now, so enable the cache */
+ movec %d0,%cacr
+ /* enable superscalar dispatch in PCR */
+ moveq #1,%d0
+ .chip 68060
+ movec %d0,%pcr
+
+ jbra L(cache_done)
+L(cache_not_680460):
+L(cache68030):
+ .chip 68030
+ movel #CC3_ENABLE_DB+CC3_CLR_D+CC3_ENABLE_D+CC3_ENABLE_IB+CC3_CLR_I+CC3_ENABLE_I,%d0
+ movec %d0,%cacr
+
+ jra L(cache_done)
+ .chip 68k
+L(cache_done):
+
+ putc 'J'
+
+/*
+ * Setup initial stack pointer
+ */
+ lea init_task,%curptr
+ lea init_thread_union+THREAD_SIZE,%sp
+
+ putc 'K'
+
+ subl %a6,%a6 /* clear a6 for gdb */
+
+/*
+ * The new 64bit printf support requires an early exception initialization.
+ */
+ jbsr base_trap_init
+
+/* jump to the kernel start */
+
+ putc '\n'
+ leds 0x55
+
+ jbsr start_kernel
+
+/*
+ * Find a tag record in the bootinfo structure
+ * The bootinfo structure is located right after the kernel bss
+ * Returns: d0: size (-1 if not found)
+ * a0: data pointer (end-of-records if not found)
+ */
+func_start get_bi_record,%d1
+
+ movel ARG1,%d0
+ lea %pc@(_end),%a0
+1: tstw %a0@(BIR_TAG)
+ jeq 3f
+ cmpw %a0@(BIR_TAG),%d0
+ jeq 2f
+ addw %a0@(BIR_SIZE),%a0
+ jra 1b
+2: moveq #0,%d0
+ movew %a0@(BIR_SIZE),%d0
+ lea %a0@(BIR_DATA),%a0
+ jra 4f
+3: moveq #-1,%d0
+ lea %a0@(BIR_SIZE),%a0
+4:
+func_return get_bi_record
+
+
+/*
+ * MMU Initialization Begins Here
+ *
+ * The structure of the MMU tables on the 68k machines
+ * is thus:
+ * Root Table
+ * Logical addresses are translated through
+ * a hierarchical translation mechanism where the high-order
+ * seven bits of the logical address (LA) are used as an
+ * index into the "root table." Each entry in the root
+ * table has a bit which specifies if it's a valid pointer to a
+ * pointer table. Each entry defines a 32KMeg range of memory.
+ * If an entry is invalid then that logical range of 32M is
+ * invalid and references to that range of memory (when the MMU
+ * is enabled) will fault. If the entry is valid, then it does
+ * one of two things. On 040/060 class machines, it points to
+ * a pointer table which then describes more finely the memory
+ * within that 32M range. On 020/030 class machines, a technique
+ * called "early terminating descriptors" are used. This technique
+ * allows an entire 32Meg to be described by a single entry in the
+ * root table. Thus, this entry in the root table, contains the
+ * physical address of the memory or I/O at the logical address
+ * which the entry represents and it also contains the necessary
+ * cache bits for this region.
+ *
+ * Pointer Tables
+ * Per the Root Table, there will be one or more
+ * pointer tables. Each pointer table defines a 32M range.
+ * Not all of the 32M range need be defined. Again, the next
+ * seven bits of the logical address are used an index into
+ * the pointer table to point to page tables (if the pointer
+ * is valid). There will undoubtedly be more than one
+ * pointer table for the kernel because each pointer table
+ * defines a range of only 32M. Valid pointer table entries
+ * point to page tables, or are early terminating entries
+ * themselves.
+ *
+ * Page Tables
+ * Per the Pointer Tables, each page table entry points
+ * to the physical page in memory that supports the logical
+ * address that translates to the particular index.
+ *
+ * In short, the Logical Address gets translated as follows:
+ * bits 31..26 - index into the Root Table
+ * bits 25..18 - index into the Pointer Table
+ * bits 17..12 - index into the Page Table
+ * bits 11..0 - offset into a particular 4K page
+ *
+ * The algorithms which follows do one thing: they abstract
+ * the MMU hardware. For example, there are three kinds of
+ * cache settings that are relevant. Either, memory is
+ * being mapped in which case it is either Kernel Code (or
+ * the RamDisk) or it is MMU data. On the 030, the MMU data
+ * option also describes the kernel. Or, I/O is being mapped
+ * in which case it has its own kind of cache bits. There
+ * are constants which abstract these notions from the code that
+ * actually makes the call to map some range of memory.
+ *
+ *
+ *
+ */
+
+#ifdef MMU_PRINT
+/*
+ * mmu_print
+ *
+ * This algorithm will print out the current MMU mappings.
+ *
+ * Input:
+ * %a5 points to the root table. Everything else is calculated
+ * from this.
+ */
+
+#define mmu_next_valid 0
+#define mmu_start_logical 4
+#define mmu_next_logical 8
+#define mmu_start_physical 12
+#define mmu_next_physical 16
+
+#define MMU_PRINT_INVALID -1
+#define MMU_PRINT_VALID 1
+#define MMU_PRINT_UNINITED 0
+
+#define putZc(z,n) jbne 1f; putc z; jbra 2f; 1: putc n; 2:
+
+func_start mmu_print,%a0-%a6/%d0-%d7
+
+ movel %pc@(L(kernel_pgdir_ptr)),%a5
+ lea %pc@(L(mmu_print_data)),%a0
+ movel #MMU_PRINT_UNINITED,%a0@(mmu_next_valid)
+
+ is_not_040_or_060(mmu_030_print)
+
+mmu_040_print:
+ puts "\nMMU040\n"
+ puts "rp:"
+ putn %a5
+ putc '\n'
+#if 0
+ /*
+ * The following #if/#endif block is a tight algorithm for dumping the 040
+ * MMU Map in gory detail. It really isn't that practical unless the
+ * MMU Map algorithm appears to go awry and you need to debug it at the
+ * entry per entry level.
+ */
+ movel #ROOT_TABLE_SIZE,%d5
+#if 0
+ movel %a5@+,%d7 | Burn an entry to skip the kernel mappings,
+ subql #1,%d5 | they (might) work
+#endif
+1: tstl %d5
+ jbeq mmu_print_done
+ subq #1,%d5
+ movel %a5@+,%d7
+ btst #1,%d7
+ jbeq 1b
+
+2: putn %d7
+ andil #0xFFFFFE00,%d7
+ movel %d7,%a4
+ movel #PTR_TABLE_SIZE,%d4
+ putc ' '
+3: tstl %d4
+ jbeq 11f
+ subq #1,%d4
+ movel %a4@+,%d7
+ btst #1,%d7
+ jbeq 3b
+
+4: putn %d7
+ andil #0xFFFFFF00,%d7
+ movel %d7,%a3
+ movel #PAGE_TABLE_SIZE,%d3
+5: movel #8,%d2
+6: tstl %d3
+ jbeq 31f
+ subq #1,%d3
+ movel %a3@+,%d6
+ btst #0,%d6
+ jbeq 6b
+7: tstl %d2
+ jbeq 8f
+ subq #1,%d2
+ putc ' '
+ jbra 91f
+8: putc '\n'
+ movel #8+1+8+1+1,%d2
+9: putc ' '
+ dbra %d2,9b
+ movel #7,%d2
+91: putn %d6
+ jbra 6b
+
+31: putc '\n'
+ movel #8+1,%d2
+32: putc ' '
+ dbra %d2,32b
+ jbra 3b
+
+11: putc '\n'
+ jbra 1b
+#endif /* MMU 040 Dumping code that's gory and detailed */
+
+ lea %pc@(kernel_pg_dir),%a5
+ movel %a5,%a0 /* a0 has the address of the root table ptr */
+ movel #0x00000000,%a4 /* logical address */
+ moveql #0,%d0
+40:
+ /* Increment the logical address and preserve in d5 */
+ movel %a4,%d5
+ addil #PAGESIZE<<13,%d5
+ movel %a0@+,%d6
+ btst #1,%d6
+ jbne 41f
+ jbsr mmu_print_tuple_invalidate
+ jbra 48f
+41:
+ movel #0,%d1
+ andil #0xfffffe00,%d6
+ movel %d6,%a1
+42:
+ movel %a4,%d5
+ addil #PAGESIZE<<6,%d5
+ movel %a1@+,%d6
+ btst #1,%d6
+ jbne 43f
+ jbsr mmu_print_tuple_invalidate
+ jbra 47f
+43:
+ movel #0,%d2
+ andil #0xffffff00,%d6
+ movel %d6,%a2
+44:
+ movel %a4,%d5
+ addil #PAGESIZE,%d5
+ movel %a2@+,%d6
+ btst #0,%d6
+ jbne 45f
+ jbsr mmu_print_tuple_invalidate
+ jbra 46f
+45:
+ moveml %d0-%d1,%sp@-
+ movel %a4,%d0
+ movel %d6,%d1
+ andil #0xfffff4e0,%d1
+ lea %pc@(mmu_040_print_flags),%a6
+ jbsr mmu_print_tuple
+ moveml %sp@+,%d0-%d1
+46:
+ movel %d5,%a4
+ addq #1,%d2
+ cmpib #64,%d2
+ jbne 44b
+47:
+ movel %d5,%a4
+ addq #1,%d1
+ cmpib #128,%d1
+ jbne 42b
+48:
+ movel %d5,%a4 /* move to the next logical address */
+ addq #1,%d0
+ cmpib #128,%d0
+ jbne 40b
+
+ .chip 68040
+ movec %dtt1,%d0
+ movel %d0,%d1
+ andiw #0x8000,%d1 /* is it valid ? */
+ jbeq 1f /* No, bail out */
+
+ movel %d0,%d1
+ andil #0xff000000,%d1 /* Get the address */
+ putn %d1
+ puts "=="
+ putn %d1
+
+ movel %d0,%d6
+ jbsr mmu_040_print_flags_tt
+1:
+ movec %dtt0,%d0
+ movel %d0,%d1
+ andiw #0x8000,%d1 /* is it valid ? */
+ jbeq 1f /* No, bail out */
+
+ movel %d0,%d1
+ andil #0xff000000,%d1 /* Get the address */
+ putn %d1
+ puts "=="
+ putn %d1
+
+ movel %d0,%d6
+ jbsr mmu_040_print_flags_tt
+1:
+ .chip 68k
+
+ jbra mmu_print_done
+
+mmu_040_print_flags:
+ btstl #10,%d6
+ putZc(' ','G') /* global bit */
+ btstl #7,%d6
+ putZc(' ','S') /* supervisor bit */
+mmu_040_print_flags_tt:
+ btstl #6,%d6
+ jbne 3f
+ putc 'C'
+ btstl #5,%d6
+ putZc('w','c') /* write through or copy-back */
+ jbra 4f
+3:
+ putc 'N'
+ btstl #5,%d6
+ putZc('s',' ') /* serialized non-cacheable, or non-cacheable */
+4:
+ rts
+
+mmu_030_print_flags:
+ btstl #6,%d6
+ putZc('C','I') /* write through or copy-back */
+ rts
+
+mmu_030_print:
+ puts "\nMMU030\n"
+ puts "\nrp:"
+ putn %a5
+ putc '\n'
+ movel %a5,%d0
+ andil #0xfffffff0,%d0
+ movel %d0,%a0
+ movel #0x00000000,%a4 /* logical address */
+ movel #0,%d0
+30:
+ movel %a4,%d5
+ addil #PAGESIZE<<13,%d5
+ movel %a0@+,%d6
+ btst #1,%d6 /* is it a table ptr? */
+ jbne 31f /* yes */
+ btst #0,%d6 /* is it early terminating? */
+ jbeq 1f /* no */
+ jbsr mmu_030_print_helper
+ jbra 38f
+1:
+ jbsr mmu_print_tuple_invalidate
+ jbra 38f
+31:
+ movel #0,%d1
+ andil #0xfffffff0,%d6
+ movel %d6,%a1
+32:
+ movel %a4,%d5
+ addil #PAGESIZE<<6,%d5
+ movel %a1@+,%d6
+ btst #1,%d6 /* is it a table ptr? */
+ jbne 33f /* yes */
+ btst #0,%d6 /* is it a page descriptor? */
+ jbeq 1f /* no */
+ jbsr mmu_030_print_helper
+ jbra 37f
+1:
+ jbsr mmu_print_tuple_invalidate
+ jbra 37f
+33:
+ movel #0,%d2
+ andil #0xfffffff0,%d6
+ movel %d6,%a2
+34:
+ movel %a4,%d5
+ addil #PAGESIZE,%d5
+ movel %a2@+,%d6
+ btst #0,%d6
+ jbne 35f
+ jbsr mmu_print_tuple_invalidate
+ jbra 36f
+35:
+ jbsr mmu_030_print_helper
+36:
+ movel %d5,%a4
+ addq #1,%d2
+ cmpib #64,%d2
+ jbne 34b
+37:
+ movel %d5,%a4
+ addq #1,%d1
+ cmpib #128,%d1
+ jbne 32b
+38:
+ movel %d5,%a4 /* move to the next logical address */
+ addq #1,%d0
+ cmpib #128,%d0
+ jbne 30b
+
+mmu_print_done:
+ puts "\n\n"
+
+func_return mmu_print
+
+
+mmu_030_print_helper:
+ moveml %d0-%d1,%sp@-
+ movel %a4,%d0
+ movel %d6,%d1
+ lea %pc@(mmu_030_print_flags),%a6
+ jbsr mmu_print_tuple
+ moveml %sp@+,%d0-%d1
+ rts
+
+mmu_print_tuple_invalidate:
+ moveml %a0/%d7,%sp@-
+
+ lea %pc@(L(mmu_print_data)),%a0
+ tstl %a0@(mmu_next_valid)
+ jbmi mmu_print_tuple_invalidate_exit
+
+ movel #MMU_PRINT_INVALID,%a0@(mmu_next_valid)
+
+ putn %a4
+
+ puts "##\n"
+
+mmu_print_tuple_invalidate_exit:
+ moveml %sp@+,%a0/%d7
+ rts
+
+
+mmu_print_tuple:
+ moveml %d0-%d7/%a0,%sp@-
+
+ lea %pc@(L(mmu_print_data)),%a0
+
+ tstl %a0@(mmu_next_valid)
+ jble mmu_print_tuple_print
+
+ cmpl %a0@(mmu_next_physical),%d1
+ jbeq mmu_print_tuple_increment
+
+mmu_print_tuple_print:
+ putn %d0
+ puts "->"
+ putn %d1
+
+ movel %d1,%d6
+ jbsr %a6@
+
+mmu_print_tuple_record:
+ movel #MMU_PRINT_VALID,%a0@(mmu_next_valid)
+
+ movel %d1,%a0@(mmu_next_physical)
+
+mmu_print_tuple_increment:
+ movel %d5,%d7
+ subl %a4,%d7
+ addl %d7,%a0@(mmu_next_physical)
+
+mmu_print_tuple_exit:
+ moveml %sp@+,%d0-%d7/%a0
+ rts
+
+mmu_print_machine_cpu_types:
+ puts "machine: "
+
+ is_not_amiga(1f)
+ puts "amiga"
+ jbra 9f
+1:
+ is_not_atari(2f)
+ puts "atari"
+ jbra 9f
+2:
+ is_not_mac(3f)
+ puts "macintosh"
+ jbra 9f
+3: puts "unknown"
+9: putc '\n'
+
+ puts "cputype: 0"
+ is_not_060(1f)
+ putc '6'
+ jbra 9f
+1:
+ is_not_040_or_060(2f)
+ putc '4'
+ jbra 9f
+2: putc '3'
+9: putc '0'
+ putc '\n'
+
+ rts
+#endif /* MMU_PRINT */
+
+/*
+ * mmu_map_tt
+ *
+ * This is a specific function which works on all 680x0 machines.
+ * On 030, 040 & 060 it will attempt to use Transparent Translation
+ * registers (tt1).
+ * On 020 it will call the standard mmu_map which will use early
+ * terminating descriptors.
+ */
+func_start mmu_map_tt,%d0/%d1/%a0,4
+
+ dputs "mmu_map_tt:"
+ dputn ARG1
+ dputn ARG2
+ dputn ARG3
+ dputn ARG4
+ dputc '\n'
+
+ is_020(L(do_map))
+
+ /* Extract the highest bit set
+ */
+ bfffo ARG3{#0,#32},%d1
+ cmpw #8,%d1
+ jcc L(do_map)
+
+ /* And get the mask
+ */
+ moveq #-1,%d0
+ lsrl %d1,%d0
+ lsrl #1,%d0
+
+ /* Mask the address
+ */
+ movel %d0,%d1
+ notl %d1
+ andl ARG2,%d1
+
+ /* Generate the upper 16bit of the tt register
+ */
+ lsrl #8,%d0
+ orl %d0,%d1
+ clrw %d1
+
+ is_040_or_060(L(mmu_map_tt_040))
+
+ /* set 030 specific bits (read/write access for supervisor mode
+ * (highest function code set, lower two bits masked))
+ */
+ orw #TTR_ENABLE+TTR_RWM+TTR_FCB2+TTR_FCM1+TTR_FCM0,%d1
+ movel ARG4,%d0
+ btst #6,%d0
+ jeq 1f
+ orw #TTR_CI,%d1
+
+1: lea STACK,%a0
+ dputn %d1
+ movel %d1,%a0@
+ .chip 68030
+ tstl ARG1
+ jne 1f
+ pmove %a0@,%tt0
+ jra 2f
+1: pmove %a0@,%tt1
+2: .chip 68k
+ jra L(mmu_map_tt_done)
+
+ /* set 040 specific bits
+ */
+L(mmu_map_tt_040):
+ orw #TTR_ENABLE+TTR_KERNELMODE,%d1
+ orl ARG4,%d1
+ dputn %d1
+
+ .chip 68040
+ tstl ARG1
+ jne 1f
+ movec %d1,%itt0
+ movec %d1,%dtt0
+ jra 2f
+1: movec %d1,%itt1
+ movec %d1,%dtt1
+2: .chip 68k
+
+ jra L(mmu_map_tt_done)
+
+L(do_map):
+ mmu_map_eq ARG2,ARG3,ARG4
+
+L(mmu_map_tt_done):
+
+func_return mmu_map_tt
+
+/*
+ * mmu_map
+ *
+ * This routine will map a range of memory using a pointer
+ * table and allocating the pages on the fly from the kernel.
+ * The pointer table does not have to be already linked into
+ * the root table, this routine will do that if necessary.
+ *
+ * NOTE
+ * This routine will assert failure and use the serial_putc
+ * routines in the case of a run-time error. For example,
+ * if the address is already mapped.
+ *
+ * NOTE-2
+ * This routine will use early terminating descriptors
+ * where possible for the 68020+68851 and 68030 type
+ * processors.
+ */
+func_start mmu_map,%d0-%d4/%a0-%a4
+
+ dputs "\nmmu_map:"
+ dputn ARG1
+ dputn ARG2
+ dputn ARG3
+ dputn ARG4
+ dputc '\n'
+
+ /* Get logical address and round it down to 256KB
+ */
+ movel ARG1,%d0
+ andl #-(PAGESIZE*PAGE_TABLE_SIZE),%d0
+ movel %d0,%a3
+
+ /* Get the end address
+ */
+ movel ARG1,%a4
+ addl ARG3,%a4
+ subql #1,%a4
+
+ /* Get physical address and round it down to 256KB
+ */
+ movel ARG2,%d0
+ andl #-(PAGESIZE*PAGE_TABLE_SIZE),%d0
+ movel %d0,%a2
+
+ /* Add page attributes to the physical address
+ */
+ movel ARG4,%d0
+ orw #_PAGE_PRESENT+_PAGE_ACCESSED+_PAGE_DIRTY,%d0
+ addw %d0,%a2
+
+ dputn %a2
+ dputn %a3
+ dputn %a4
+
+ is_not_040_or_060(L(mmu_map_030))
+
+ addw #_PAGE_GLOBAL040,%a2
+/*
+ * MMU 040 & 060 Support
+ *
+ * The MMU usage for the 040 and 060 is different enough from
+ * the 030 and 68851 that there is separate code. This comment
+ * block describes the data structures and algorithms built by
+ * this code.
+ *
+ * The 040 does not support early terminating descriptors, as
+ * the 030 does. Therefore, a third level of table is needed
+ * for the 040, and that would be the page table. In Linux,
+ * page tables are allocated directly from the memory above the
+ * kernel.
+ *
+ */
+
+L(mmu_map_040):
+ /* Calculate the offset into the root table
+ */
+ movel %a3,%d0
+ moveq #ROOT_INDEX_SHIFT,%d1
+ lsrl %d1,%d0
+ mmu_get_root_table_entry %d0
+
+ /* Calculate the offset into the pointer table
+ */
+ movel %a3,%d0
+ moveq #PTR_INDEX_SHIFT,%d1
+ lsrl %d1,%d0
+ andl #PTR_TABLE_SIZE-1,%d0
+ mmu_get_ptr_table_entry %a0,%d0
+
+ /* Calculate the offset into the page table
+ */
+ movel %a3,%d0
+ moveq #PAGE_INDEX_SHIFT,%d1
+ lsrl %d1,%d0
+ andl #PAGE_TABLE_SIZE-1,%d0
+ mmu_get_page_table_entry %a0,%d0
+
+ /* The page table entry must not no be busy
+ */
+ tstl %a0@
+ jne L(mmu_map_error)
+
+ /* Do the mapping and advance the pointers
+ */
+ movel %a2,%a0@
+2:
+ addw #PAGESIZE,%a2
+ addw #PAGESIZE,%a3
+
+ /* Ready with mapping?
+ */
+ lea %a3@(-1),%a0
+ cmpl %a0,%a4
+ jhi L(mmu_map_040)
+ jra L(mmu_map_done)
+
+L(mmu_map_030):
+ /* Calculate the offset into the root table
+ */
+ movel %a3,%d0
+ moveq #ROOT_INDEX_SHIFT,%d1
+ lsrl %d1,%d0
+ mmu_get_root_table_entry %d0
+
+ /* Check if logical address 32MB aligned,
+ * so we can try to map it once
+ */
+ movel %a3,%d0
+ andl #(PTR_TABLE_SIZE*PAGE_TABLE_SIZE*PAGESIZE-1)&(-ROOT_TABLE_SIZE),%d0
+ jne 1f
+
+ /* Is there enough to map for 32MB at once
+ */
+ lea %a3@(PTR_TABLE_SIZE*PAGE_TABLE_SIZE*PAGESIZE-1),%a1
+ cmpl %a1,%a4
+ jcs 1f
+
+ addql #1,%a1
+
+ /* The root table entry must not no be busy
+ */
+ tstl %a0@
+ jne L(mmu_map_error)
+
+ /* Do the mapping and advance the pointers
+ */
+ dputs "early term1"
+ dputn %a2
+ dputn %a3
+ dputn %a1
+ dputc '\n'
+ movel %a2,%a0@
+
+ movel %a1,%a3
+ lea %a2@(PTR_TABLE_SIZE*PAGE_TABLE_SIZE*PAGESIZE),%a2
+ jra L(mmu_mapnext_030)
+1:
+ /* Calculate the offset into the pointer table
+ */
+ movel %a3,%d0
+ moveq #PTR_INDEX_SHIFT,%d1
+ lsrl %d1,%d0
+ andl #PTR_TABLE_SIZE-1,%d0
+ mmu_get_ptr_table_entry %a0,%d0
+
+ /* The pointer table entry must not no be busy
+ */
+ tstl %a0@
+ jne L(mmu_map_error)
+
+ /* Do the mapping and advance the pointers
+ */
+ dputs "early term2"
+ dputn %a2
+ dputn %a3
+ dputc '\n'
+ movel %a2,%a0@
+
+ addl #PAGE_TABLE_SIZE*PAGESIZE,%a2
+ addl #PAGE_TABLE_SIZE*PAGESIZE,%a3
+
+L(mmu_mapnext_030):
+ /* Ready with mapping?
+ */
+ lea %a3@(-1),%a0
+ cmpl %a0,%a4
+ jhi L(mmu_map_030)
+ jra L(mmu_map_done)
+
+L(mmu_map_error):
+
+ dputs "mmu_map error:"
+ dputn %a2
+ dputn %a3
+ dputc '\n'
+
+L(mmu_map_done):
+
+func_return mmu_map
+
+/*
+ * mmu_fixup
+ *
+ * On the 040 class machines, all pages that are used for the
+ * mmu have to be fixed up.
+ */
+
+func_start mmu_fixup_page_mmu_cache,%d0/%a0
+
+ dputs "mmu_fixup_page_mmu_cache"
+ dputn ARG1
+
+ /* Calculate the offset into the root table
+ */
+ movel ARG1,%d0
+ moveq #ROOT_INDEX_SHIFT,%d1
+ lsrl %d1,%d0
+ mmu_get_root_table_entry %d0
+
+ /* Calculate the offset into the pointer table
+ */
+ movel ARG1,%d0
+ moveq #PTR_INDEX_SHIFT,%d1
+ lsrl %d1,%d0
+ andl #PTR_TABLE_SIZE-1,%d0
+ mmu_get_ptr_table_entry %a0,%d0
+
+ /* Calculate the offset into the page table
+ */
+ movel ARG1,%d0
+ moveq #PAGE_INDEX_SHIFT,%d1
+ lsrl %d1,%d0
+ andl #PAGE_TABLE_SIZE-1,%d0
+ mmu_get_page_table_entry %a0,%d0
+
+ movel %a0@,%d0
+ andil #_CACHEMASK040,%d0
+ orl %pc@(m68k_pgtable_cachemode),%d0
+ movel %d0,%a0@
+
+ dputc '\n'
+
+func_return mmu_fixup_page_mmu_cache
+
+/*
+ * mmu_temp_map
+ *
+ * create a temporary mapping to enable the mmu,
+ * this we don't need any transparation translation tricks.
+ */
+
+func_start mmu_temp_map,%d0/%d1/%a0/%a1
+
+ dputs "mmu_temp_map"
+ dputn ARG1
+ dputn ARG2
+ dputc '\n'
+
+ lea %pc@(L(temp_mmap_mem)),%a1
+
+ /* Calculate the offset in the root table
+ */
+ movel ARG2,%d0
+ moveq #ROOT_INDEX_SHIFT,%d1
+ lsrl %d1,%d0
+ mmu_get_root_table_entry %d0
+
+ /* Check if the table is temporary allocated, so we have to reuse it
+ */
+ movel %a0@,%d0
+ cmpl %pc@(L(memory_start)),%d0
+ jcc 1f
+
+ /* Temporary allocate a ptr table and insert it into the root table
+ */
+ movel %a1@,%d0
+ addl #PTR_TABLE_SIZE*4,%a1@
+ orw #_PAGE_TABLE+_PAGE_ACCESSED,%d0
+ movel %d0,%a0@
+ dputs " (new)"
+1:
+ dputn %d0
+ /* Mask the root table entry for the ptr table
+ */
+ andw #-ROOT_TABLE_SIZE,%d0
+ movel %d0,%a0
+
+ /* Calculate the offset into the pointer table
+ */
+ movel ARG2,%d0
+ moveq #PTR_INDEX_SHIFT,%d1
+ lsrl %d1,%d0
+ andl #PTR_TABLE_SIZE-1,%d0
+ lea %a0@(%d0*4),%a0
+ dputn %a0
+
+ /* Check if a temporary page table is already allocated
+ */
+ movel %a0@,%d0
+ jne 1f
+
+ /* Temporary allocate a page table and insert it into the ptr table
+ */
+ movel %a1@,%d0
+ /* The 512 should be PAGE_TABLE_SIZE*4, but that violates the
+ alignment restriction for pointer tables on the '0[46]0. */
+ addl #512,%a1@
+ orw #_PAGE_TABLE+_PAGE_ACCESSED,%d0
+ movel %d0,%a0@
+ dputs " (new)"
+1:
+ dputn %d0
+ /* Mask the ptr table entry for the page table
+ */
+ andw #-PTR_TABLE_SIZE,%d0
+ movel %d0,%a0
+
+ /* Calculate the offset into the page table
+ */
+ movel ARG2,%d0
+ moveq #PAGE_INDEX_SHIFT,%d1
+ lsrl %d1,%d0
+ andl #PAGE_TABLE_SIZE-1,%d0
+ lea %a0@(%d0*4),%a0
+ dputn %a0
+
+ /* Insert the address into the page table
+ */
+ movel ARG1,%d0
+ andw #-PAGESIZE,%d0
+ orw #_PAGE_PRESENT+_PAGE_ACCESSED+_PAGE_DIRTY,%d0
+ movel %d0,%a0@
+ dputn %d0
+
+ dputc '\n'
+
+func_return mmu_temp_map
+
+func_start mmu_engage,%d0-%d2/%a0-%a3
+
+ moveq #ROOT_TABLE_SIZE-1,%d0
+ /* Temporarily use a different root table. */
+ lea %pc@(L(kernel_pgdir_ptr)),%a0
+ movel %a0@,%a2
+ movel %pc@(L(memory_start)),%a1
+ movel %a1,%a0@
+ movel %a2,%a0
+1:
+ movel %a0@+,%a1@+
+ dbra %d0,1b
+
+ lea %pc@(L(temp_mmap_mem)),%a0
+ movel %a1,%a0@
+
+ movew #PAGESIZE-1,%d0
+1:
+ clrl %a1@+
+ dbra %d0,1b
+
+ lea %pc@(1b),%a0
+ movel #1b,%a1
+ /* Skip temp mappings if phys == virt */
+ cmpl %a0,%a1
+ jeq 1f
+
+ mmu_temp_map %a0,%a0
+ mmu_temp_map %a0,%a1
+
+ addw #PAGESIZE,%a0
+ addw #PAGESIZE,%a1
+ mmu_temp_map %a0,%a0
+ mmu_temp_map %a0,%a1
+1:
+ movel %pc@(L(memory_start)),%a3
+ movel %pc@(L(phys_kernel_start)),%d2
+
+ is_not_040_or_060(L(mmu_engage_030))
+
+L(mmu_engage_040):
+ .chip 68040
+ nop
+ cinva %bc
+ nop
+ pflusha
+ nop
+ movec %a3,%srp
+ movel #TC_ENABLE+TC_PAGE4K,%d0
+ movec %d0,%tc /* enable the MMU */
+ jmp 1f:l
+1: nop
+ movec %a2,%srp
+ nop
+ cinva %bc
+ nop
+ pflusha
+ .chip 68k
+ jra L(mmu_engage_cleanup)
+
+L(mmu_engage_030_temp):
+ .space 12
+L(mmu_engage_030):
+ .chip 68030
+ lea %pc@(L(mmu_engage_030_temp)),%a0
+ movel #0x80000002,%a0@
+ movel %a3,%a0@(4)
+ movel #0x0808,%d0
+ movec %d0,%cacr
+ pmove %a0@,%srp
+ pflusha
+ /*
+ * enable,super root enable,4096 byte pages,7 bit root index,
+ * 7 bit pointer index, 6 bit page table index.
+ */
+ movel #0x82c07760,%a0@(8)
+ pmove %a0@(8),%tc /* enable the MMU */
+ jmp 1f:l
+1: movel %a2,%a0@(4)
+ movel #0x0808,%d0
+ movec %d0,%cacr
+ pmove %a0@,%srp
+ pflusha
+ .chip 68k
+
+L(mmu_engage_cleanup):
+ subl #PAGE_OFFSET,%d2
+ subl %d2,%a2
+ movel %a2,L(kernel_pgdir_ptr)
+ subl %d2,%fp
+ subl %d2,%sp
+ subl %d2,ARG0
+
+func_return mmu_engage
+
+func_start mmu_get_root_table_entry,%d0/%a1
+
+#if 0
+ dputs "mmu_get_root_table_entry:"
+ dputn ARG1
+ dputs " ="
+#endif
+
+ movel %pc@(L(kernel_pgdir_ptr)),%a0
+ tstl %a0
+ jne 2f
+
+ dputs "\nmmu_init:"
+
+ /* Find the start of free memory, get_bi_record does this for us,
+ * as the bootinfo structure is located directly behind the kernel
+ * and and we simply search for the last entry.
+ */
+ get_bi_record BI_LAST
+ addw #PAGESIZE-1,%a0
+ movel %a0,%d0
+ andw #-PAGESIZE,%d0
+
+ dputn %d0
+
+ lea %pc@(L(memory_start)),%a0
+ movel %d0,%a0@
+ lea %pc@(L(kernel_end)),%a0
+ movel %d0,%a0@
+
+ /* we have to return the first page at _stext since the init code
+ * in mm/init.c simply expects kernel_pg_dir there, the rest of
+ * page is used for further ptr tables in get_ptr_table.
+ */
+ lea %pc@(_stext),%a0
+ lea %pc@(L(mmu_cached_pointer_tables)),%a1
+ movel %a0,%a1@
+ addl #ROOT_TABLE_SIZE*4,%a1@
+
+ lea %pc@(L(mmu_num_pointer_tables)),%a1
+ addql #1,%a1@
+
+ /* clear the page
+ */
+ movel %a0,%a1
+ movew #PAGESIZE/4-1,%d0
+1:
+ clrl %a1@+
+ dbra %d0,1b
+
+ lea %pc@(L(kernel_pgdir_ptr)),%a1
+ movel %a0,%a1@
+
+ dputn %a0
+ dputc '\n'
+2:
+ movel ARG1,%d0
+ lea %a0@(%d0*4),%a0
+
+#if 0
+ dputn %a0
+ dputc '\n'
+#endif
+
+func_return mmu_get_root_table_entry
+
+
+
+func_start mmu_get_ptr_table_entry,%d0/%a1
+
+#if 0
+ dputs "mmu_get_ptr_table_entry:"
+ dputn ARG1
+ dputn ARG2
+ dputs " ="
+#endif
+
+ movel ARG1,%a0
+ movel %a0@,%d0
+ jne 2f
+
+ /* Keep track of the number of pointer tables we use
+ */
+ dputs "\nmmu_get_new_ptr_table:"
+ lea %pc@(L(mmu_num_pointer_tables)),%a0
+ movel %a0@,%d0
+ addql #1,%a0@
+
+ /* See if there is a free pointer table in our cache of pointer tables
+ */
+ lea %pc@(L(mmu_cached_pointer_tables)),%a1
+ andw #7,%d0
+ jne 1f
+
+ /* Get a new pointer table page from above the kernel memory
+ */
+ get_new_page
+ movel %a0,%a1@
+1:
+ /* There is an unused pointer table in our cache... use it
+ */
+ movel %a1@,%d0
+ addl #PTR_TABLE_SIZE*4,%a1@
+
+ dputn %d0
+ dputc '\n'
+
+ /* Insert the new pointer table into the root table
+ */
+ movel ARG1,%a0
+ orw #_PAGE_TABLE+_PAGE_ACCESSED,%d0
+ movel %d0,%a0@
+2:
+ /* Extract the pointer table entry
+ */
+ andw #-PTR_TABLE_SIZE,%d0
+ movel %d0,%a0
+ movel ARG2,%d0
+ lea %a0@(%d0*4),%a0
+
+#if 0
+ dputn %a0
+ dputc '\n'
+#endif
+
+func_return mmu_get_ptr_table_entry
+
+
+func_start mmu_get_page_table_entry,%d0/%a1
+
+#if 0
+ dputs "mmu_get_page_table_entry:"
+ dputn ARG1
+ dputn ARG2
+ dputs " ="
+#endif
+
+ movel ARG1,%a0
+ movel %a0@,%d0
+ jne 2f
+
+ /* If the page table entry doesn't exist, we allocate a complete new
+ * page and use it as one continues big page table which can cover
+ * 4MB of memory, nearly almost all mappings have that alignment.
+ */
+ get_new_page
+ addw #_PAGE_TABLE+_PAGE_ACCESSED,%a0
+
+ /* align pointer table entry for a page of page tables
+ */
+ movel ARG1,%d0
+ andw #-(PAGESIZE/PAGE_TABLE_SIZE),%d0
+ movel %d0,%a1
+
+ /* Insert the page tables into the pointer entries
+ */
+ moveq #PAGESIZE/PAGE_TABLE_SIZE/4-1,%d0
+1:
+ movel %a0,%a1@+
+ lea %a0@(PAGE_TABLE_SIZE*4),%a0
+ dbra %d0,1b
+
+ /* Now we can get the initialized pointer table entry
+ */
+ movel ARG1,%a0
+ movel %a0@,%d0
+2:
+ /* Extract the page table entry
+ */
+ andw #-PAGE_TABLE_SIZE,%d0
+ movel %d0,%a0
+ movel ARG2,%d0
+ lea %a0@(%d0*4),%a0
+
+#if 0
+ dputn %a0
+ dputc '\n'
+#endif
+
+func_return mmu_get_page_table_entry
+
+/*
+ * get_new_page
+ *
+ * Return a new page from the memory start and clear it.
+ */
+func_start get_new_page,%d0/%a1
+
+ dputs "\nget_new_page:"
+
+ /* allocate the page and adjust memory_start
+ */
+ lea %pc@(L(memory_start)),%a0
+ movel %a0@,%a1
+ addl #PAGESIZE,%a0@
+
+ /* clear the new page
+ */
+ movel %a1,%a0
+ movew #PAGESIZE/4-1,%d0
+1:
+ clrl %a1@+
+ dbra %d0,1b
+
+ dputn %a0
+ dputc '\n'
+
+func_return get_new_page
+
+
+
+/*
+ * Debug output support
+ * Atarians have a choice between the parallel port, the serial port
+ * from the MFP or a serial port of the SCC
+ */
+
+#ifdef CONFIG_MAC
+
+L(scc_initable_mac):
+ .byte 9,12 /* Reset */
+ .byte 4,0x44 /* x16, 1 stopbit, no parity */
+ .byte 3,0xc0 /* receiver: 8 bpc */
+ .byte 5,0xe2 /* transmitter: 8 bpc, assert dtr/rts */
+ .byte 9,0 /* no interrupts */
+ .byte 10,0 /* NRZ */
+ .byte 11,0x50 /* use baud rate generator */
+ .byte 12,10,13,0 /* 9600 baud */
+ .byte 14,1 /* Baud rate generator enable */
+ .byte 3,0xc1 /* enable receiver */
+ .byte 5,0xea /* enable transmitter */
+ .byte -1
+ .even
+#endif
+
+#ifdef CONFIG_ATARI
+/* #define USE_PRINTER */
+/* #define USE_SCC_B */
+/* #define USE_SCC_A */
+#define USE_MFP
+
+#if defined(USE_SCC_A) || defined(USE_SCC_B)
+#define USE_SCC
+/* Initialisation table for SCC */
+L(scc_initable):
+ .byte 9,12 /* Reset */
+ .byte 4,0x44 /* x16, 1 stopbit, no parity */
+ .byte 3,0xc0 /* receiver: 8 bpc */
+ .byte 5,0xe2 /* transmitter: 8 bpc, assert dtr/rts */
+ .byte 9,0 /* no interrupts */
+ .byte 10,0 /* NRZ */
+ .byte 11,0x50 /* use baud rate generator */
+ .byte 12,24,13,0 /* 9600 baud */
+ .byte 14,2,14,3 /* use master clock for BRG, enable */
+ .byte 3,0xc1 /* enable receiver */
+ .byte 5,0xea /* enable transmitter */
+ .byte -1
+ .even
+#endif
+
+#ifdef USE_PRINTER
+
+LPSG_SELECT = 0xff8800
+LPSG_READ = 0xff8800
+LPSG_WRITE = 0xff8802
+LPSG_IO_A = 14
+LPSG_IO_B = 15
+LPSG_CONTROL = 7
+LSTMFP_GPIP = 0xfffa01
+LSTMFP_DDR = 0xfffa05
+LSTMFP_IERB = 0xfffa09
+
+#elif defined(USE_SCC_B)
+
+LSCC_CTRL = 0xff8c85
+LSCC_DATA = 0xff8c87
+
+#elif defined(USE_SCC_A)
+
+LSCC_CTRL = 0xff8c81
+LSCC_DATA = 0xff8c83
+
+#elif defined(USE_MFP)
+
+LMFP_UCR = 0xfffa29
+LMFP_TDCDR = 0xfffa1d
+LMFP_TDDR = 0xfffa25
+LMFP_TSR = 0xfffa2d
+LMFP_UDR = 0xfffa2f
+
+#endif
+#endif /* CONFIG_ATARI */
+
+/*
+ * Serial port output support.
+ */
+
+/*
+ * Initialize serial port hardware for 9600/8/1
+ */
+func_start serial_init,%d0/%d1/%a0/%a1
+ /*
+ * Some of the register usage that follows
+ * CONFIG_AMIGA
+ * a0 = pointer to boot info record
+ * d0 = boot info offset
+ * CONFIG_ATARI
+ * a0 = address of SCC
+ * a1 = Liobase address/address of scc_initable
+ * d0 = init data for serial port
+ * CONFIG_MAC
+ * a0 = address of SCC
+ * a1 = address of scc_initable_mac
+ * d0 = init data for serial port
+ */
+
+#ifdef CONFIG_AMIGA
+#define SERIAL_DTR 7
+#define SERIAL_CNTRL CIABBASE+C_PRA
+
+ is_not_amiga(1f)
+ lea %pc@(L(custom)),%a0
+ movel #-ZTWOBASE,%a0@
+ bclr #SERIAL_DTR,SERIAL_CNTRL-ZTWOBASE
+ get_bi_record BI_AMIGA_SERPER
+ movew %a0@,CUSTOMBASE+C_SERPER-ZTWOBASE
+| movew #61,CUSTOMBASE+C_SERPER-ZTWOBASE
+1:
+#endif
+#ifdef CONFIG_ATARI
+ is_not_atari(4f)
+ movel %pc@(L(iobase)),%a1
+#if defined(USE_PRINTER)
+ bclr #0,%a1@(LSTMFP_IERB)
+ bclr #0,%a1@(LSTMFP_DDR)
+ moveb #LPSG_CONTROL,%a1@(LPSG_SELECT)
+ moveb #0xff,%a1@(LPSG_WRITE)
+ moveb #LPSG_IO_B,%a1@(LPSG_SELECT)
+ clrb %a1@(LPSG_WRITE)
+ moveb #LPSG_IO_A,%a1@(LPSG_SELECT)
+ moveb %a1@(LPSG_READ),%d0
+ bset #5,%d0
+ moveb %d0,%a1@(LPSG_WRITE)
+#elif defined(USE_SCC)
+ lea %a1@(LSCC_CTRL),%a0
+ lea %pc@(L(scc_initable)),%a1
+2: moveb %a1@+,%d0
+ jmi 3f
+ moveb %d0,%a0@
+ moveb %a1@+,%a0@
+ jra 2b
+3: clrb %a0@
+#elif defined(USE_MFP)
+ bclr #1,%a1@(LMFP_TSR)
+ moveb #0x88,%a1@(LMFP_UCR)
+ andb #0x70,%a1@(LMFP_TDCDR)
+ moveb #2,%a1@(LMFP_TDDR)
+ orb #1,%a1@(LMFP_TDCDR)
+ bset #1,%a1@(LMFP_TSR)
+#endif
+ jra L(serial_init_done)
+4:
+#endif
+#ifdef CONFIG_MAC
+ is_not_mac(L(serial_init_not_mac))
+#ifdef MAC_SERIAL_DEBUG
+#if !defined(MAC_USE_SCC_A) && !defined(MAC_USE_SCC_B)
+#define MAC_USE_SCC_B
+#endif
+#define mac_scc_cha_b_ctrl_offset 0x0
+#define mac_scc_cha_a_ctrl_offset 0x2
+#define mac_scc_cha_b_data_offset 0x4
+#define mac_scc_cha_a_data_offset 0x6
+
+#ifdef MAC_USE_SCC_A
+ /* Initialize channel A */
+ movel %pc@(L(mac_sccbase)),%a0
+ lea %pc@(L(scc_initable_mac)),%a1
+5: moveb %a1@+,%d0
+ jmi 6f
+ moveb %d0,%a0@(mac_scc_cha_a_ctrl_offset)
+ moveb %a1@+,%a0@(mac_scc_cha_a_ctrl_offset)
+ jra 5b
+6:
+#endif /* MAC_USE_SCC_A */
+
+#ifdef MAC_USE_SCC_B
+ /* Initialize channel B */
+#ifndef MAC_USE_SCC_A /* Load mac_sccbase only if needed */
+ movel %pc@(L(mac_sccbase)),%a0
+#endif /* MAC_USE_SCC_A */
+ lea %pc@(L(scc_initable_mac)),%a1
+7: moveb %a1@+,%d0
+ jmi 8f
+ moveb %d0,%a0@(mac_scc_cha_b_ctrl_offset)
+ moveb %a1@+,%a0@(mac_scc_cha_b_ctrl_offset)
+ jra 7b
+8:
+#endif /* MAC_USE_SCC_B */
+#endif /* MAC_SERIAL_DEBUG */
+
+ jra L(serial_init_done)
+L(serial_init_not_mac):
+#endif /* CONFIG_MAC */
+
+#ifdef CONFIG_Q40
+ is_not_q40(2f)
+/* debug output goes into SRAM, so we don't do it unless requested
+ - check for '%LX$' signature in SRAM */
+ lea %pc@(q40_mem_cptr),%a1
+ move.l #0xff020010,%a1@ /* must be inited - also used by debug=mem */
+ move.l #0xff020000,%a1
+ cmp.b #'%',%a1@
+ bne 2f /*nodbg*/
+ addq.w #4,%a1
+ cmp.b #'L',%a1@
+ bne 2f /*nodbg*/
+ addq.w #4,%a1
+ cmp.b #'X',%a1@
+ bne 2f /*nodbg*/
+ addq.w #4,%a1
+ cmp.b #'$',%a1@
+ bne 2f /*nodbg*/
+ /* signature OK */
+ lea %pc@(L(q40_do_debug)),%a1
+ tas %a1@
+/*nodbg: q40_do_debug is 0 by default*/
+2:
+#endif
+
+#ifdef CONFIG_APOLLO
+/* We count on the PROM initializing SIO1 */
+#endif
+
+#ifdef CONFIG_HP300
+/* We count on the boot loader initialising the UART */
+#endif
+
+L(serial_init_done):
+func_return serial_init
+
+/*
+ * Output character on serial port.
+ */
+func_start serial_putc,%d0/%d1/%a0/%a1
+
+ movel ARG1,%d0
+ cmpib #'\n',%d0
+ jbne 1f
+
+ /* A little safe recursion is good for the soul */
+ serial_putc #'\r'
+1:
+
+#ifdef CONFIG_AMIGA
+ is_not_amiga(2f)
+ andw #0x00ff,%d0
+ oriw #0x0100,%d0
+ movel %pc@(L(custom)),%a0
+ movew %d0,%a0@(CUSTOMBASE+C_SERDAT)
+1: movew %a0@(CUSTOMBASE+C_SERDATR),%d0
+ andw #0x2000,%d0
+ jeq 1b
+ jra L(serial_putc_done)
+2:
+#endif
+
+#ifdef CONFIG_MAC
+ is_not_mac(5f)
+
+#ifdef MAC_SERIAL_DEBUG
+
+#ifdef MAC_USE_SCC_A
+ movel %pc@(L(mac_sccbase)),%a1
+3: btst #2,%a1@(mac_scc_cha_a_ctrl_offset)
+ jeq 3b
+ moveb %d0,%a1@(mac_scc_cha_a_data_offset)
+#endif /* MAC_USE_SCC_A */
+
+#ifdef MAC_USE_SCC_B
+#ifndef MAC_USE_SCC_A /* Load mac_sccbase only if needed */
+ movel %pc@(L(mac_sccbase)),%a1
+#endif /* MAC_USE_SCC_A */
+4: btst #2,%a1@(mac_scc_cha_b_ctrl_offset)
+ jeq 4b
+ moveb %d0,%a1@(mac_scc_cha_b_data_offset)
+#endif /* MAC_USE_SCC_B */
+
+#endif /* MAC_SERIAL_DEBUG */
+
+ jra L(serial_putc_done)
+5:
+#endif /* CONFIG_MAC */
+
+#ifdef CONFIG_ATARI
+ is_not_atari(4f)
+ movel %pc@(L(iobase)),%a1
+#if defined(USE_PRINTER)
+3: btst #0,%a1@(LSTMFP_GPIP)
+ jne 3b
+ moveb #LPSG_IO_B,%a1@(LPSG_SELECT)
+ moveb %d0,%a1@(LPSG_WRITE)
+ moveb #LPSG_IO_A,%a1@(LPSG_SELECT)
+ moveb %a1@(LPSG_READ),%d0
+ bclr #5,%d0
+ moveb %d0,%a1@(LPSG_WRITE)
+ nop
+ nop
+ bset #5,%d0
+ moveb %d0,%a1@(LPSG_WRITE)
+#elif defined(USE_SCC)
+3: btst #2,%a1@(LSCC_CTRL)
+ jeq 3b
+ moveb %d0,%a1@(LSCC_DATA)
+#elif defined(USE_MFP)
+3: btst #7,%a1@(LMFP_TSR)
+ jeq 3b
+ moveb %d0,%a1@(LMFP_UDR)
+#endif
+ jra L(serial_putc_done)
+4:
+#endif /* CONFIG_ATARI */
+
+#ifdef CONFIG_MVME147
+ is_not_mvme147(2f)
+1: btst #2,M147_SCC_CTRL_A
+ jeq 1b
+ moveb %d0,M147_SCC_DATA_A
+ jbra L(serial_putc_done)
+2:
+#endif
+
+#ifdef CONFIG_MVME16x
+ is_not_mvme16x(2f)
+ /*
+ * If the loader gave us a board type then we can use that to
+ * select an appropriate output routine; otherwise we just use
+ * the Bug code. If we haev to use the Bug that means the Bug
+ * workspace has to be valid, which means the Bug has to use
+ * the SRAM, which is non-standard.
+ */
+ moveml %d0-%d7/%a2-%a6,%sp@-
+ movel vme_brdtype,%d1
+ jeq 1f | No tag - use the Bug
+ cmpi #VME_TYPE_MVME162,%d1
+ jeq 6f
+ cmpi #VME_TYPE_MVME172,%d1
+ jne 5f
+ /* 162/172; it's an SCC */
+6: btst #2,M162_SCC_CTRL_A
+ nop
+ nop
+ nop
+ jeq 6b
+ moveb #8,M162_SCC_CTRL_A
+ nop
+ nop
+ nop
+ moveb %d0,M162_SCC_CTRL_A
+ jra 3f
+5:
+ /* 166/167/177; it's a CD2401 */
+ moveb #0,M167_CYCAR
+ moveb M167_CYIER,%d2
+ moveb #0x02,M167_CYIER
+7:
+ btst #5,M167_PCSCCTICR
+ jeq 7b
+ moveb M167_PCTPIACKR,%d1
+ moveb M167_CYLICR,%d1
+ jeq 8f
+ moveb #0x08,M167_CYTEOIR
+ jra 7b
+8:
+ moveb %d0,M167_CYTDR
+ moveb #0,M167_CYTEOIR
+ moveb %d2,M167_CYIER
+ jra 3f
+1:
+ moveb %d0,%sp@-
+ trap #15
+ .word 0x0020 /* TRAP 0x020 */
+3:
+ moveml %sp@+,%d0-%d7/%a2-%a6
+ jbra L(serial_putc_done)
+2:
+#endif /* CONFIG_MVME16x */
+
+#ifdef CONFIG_BVME6000
+ is_not_bvme6000(2f)
+ /*
+ * The BVME6000 machine has a serial port ...
+ */
+1: btst #2,BVME_SCC_CTRL_A
+ jeq 1b
+ moveb %d0,BVME_SCC_DATA_A
+ jbra L(serial_putc_done)
+2:
+#endif
+
+#ifdef CONFIG_SUN3X
+ is_not_sun3x(2f)
+ movel %d0,-(%sp)
+ movel 0xFEFE0018,%a1
+ jbsr (%a1)
+ addq #4,%sp
+ jbra L(serial_putc_done)
+2:
+#endif
+
+#ifdef CONFIG_Q40
+ is_not_q40(2f)
+ tst.l %pc@(L(q40_do_debug)) /* only debug if requested */
+ beq 2f
+ lea %pc@(q40_mem_cptr),%a1
+ move.l %a1@,%a0
+ move.b %d0,%a0@
+ addq.l #4,%a0
+ move.l %a0,%a1@
+ jbra L(serial_putc_done)
+2:
+#endif
+
+#ifdef CONFIG_APOLLO
+ is_not_apollo(2f)
+ movl %pc@(L(iobase)),%a1
+ moveb %d0,%a1@(LTHRB0)
+1: moveb %a1@(LSRB0),%d0
+ andb #0x4,%d0
+ beq 1b
+ jbra L(serial_putc_done)
+2:
+#endif
+
+#ifdef CONFIG_HP300
+ is_not_hp300(3f)
+ movl %pc@(L(iobase)),%a1
+ addl %pc@(L(uartbase)),%a1
+ movel %pc@(L(uart_scode)),%d1 /* Check the scode */
+ jmi 3f /* Unset? Exit */
+ cmpi #256,%d1 /* APCI scode? */
+ jeq 2f
+1: moveb %a1@(DCALSR),%d1 /* Output to DCA */
+ andb #0x20,%d1
+ beq 1b
+ moveb %d0,%a1@(DCADATA)
+ jbra L(serial_putc_done)
+2: moveb %a1@(APCILSR),%d1 /* Output to APCI */
+ andb #0x20,%d1
+ beq 2b
+ moveb %d0,%a1@(APCIDATA)
+ jbra L(serial_putc_done)
+3:
+#endif
+
+L(serial_putc_done):
+func_return serial_putc
+
+/*
+ * Output a string.
+ */
+func_start puts,%d0/%a0
+
+ movel ARG1,%a0
+ jra 2f
+1:
+#ifdef CONSOLE
+ console_putc %d0
+#endif
+#ifdef SERIAL_DEBUG
+ serial_putc %d0
+#endif
+2: moveb %a0@+,%d0
+ jne 1b
+
+func_return puts
+
+/*
+ * Output number in hex notation.
+ */
+
+func_start putn,%d0-%d2
+
+ putc ' '
+
+ movel ARG1,%d0
+ moveq #7,%d1
+1: roll #4,%d0
+ move %d0,%d2
+ andb #0x0f,%d2
+ addb #'0',%d2
+ cmpb #'9',%d2
+ jls 2f
+ addb #'A'-('9'+1),%d2
+2:
+#ifdef CONSOLE
+ console_putc %d2
+#endif
+#ifdef SERIAL_DEBUG
+ serial_putc %d2
+#endif
+ dbra %d1,1b
+
+func_return putn
+
+#ifdef CONFIG_MAC
+/*
+ * mac_serial_print
+ *
+ * This routine takes its parameters on the stack. It then
+ * turns around and calls the internal routine. This routine
+ * is used until the Linux console driver initializes itself.
+ *
+ * The calling parameters are:
+ * void mac_serial_print(const char *str);
+ *
+ * This routine does NOT understand variable arguments only
+ * simple strings!
+ */
+ENTRY(mac_serial_print)
+ moveml %d0/%a0,%sp@-
+#if 1
+ move %sr,%sp@-
+ ori #0x0700,%sr
+#endif
+ movel %sp@(10),%a0 /* fetch parameter */
+ jra 2f
+1: serial_putc %d0
+2: moveb %a0@+,%d0
+ jne 1b
+#if 1
+ move %sp@+,%sr
+#endif
+ moveml %sp@+,%d0/%a0
+ rts
+#endif /* CONFIG_MAC */
+
+#if defined(CONFIG_HP300) || defined(CONFIG_APOLLO)
+func_start set_leds,%d0/%a0
+ movel ARG1,%d0
+#ifdef CONFIG_HP300
+ is_not_hp300(1f)
+ movel %pc@(L(iobase)),%a0
+ moveb %d0,%a0@(0x1ffff)
+ jra 2f
+#endif
+1:
+#ifdef CONFIG_APOLLO
+ movel %pc@(L(iobase)),%a0
+ lsll #8,%d0
+ eorw #0xff00,%d0
+ moveb %d0,%a0@(LCPUCTRL)
+#endif
+2:
+func_return set_leds
+#endif
+
+#ifdef CONSOLE
+/*
+ * For continuity, see the data alignment
+ * to which this structure is tied.
+ */
+#define Lconsole_struct_cur_column 0
+#define Lconsole_struct_cur_row 4
+#define Lconsole_struct_num_columns 8
+#define Lconsole_struct_num_rows 12
+#define Lconsole_struct_left_edge 16
+#define Lconsole_struct_penguin_putc 20
+
+func_start console_init,%a0-%a4/%d0-%d7
+ /*
+ * Some of the register usage that follows
+ * a0 = pointer to boot_info
+ * a1 = pointer to screen
+ * a2 = pointer to Lconsole_globals
+ * d3 = pixel width of screen
+ * d4 = pixel height of screen
+ * (d3,d4) ~= (x,y) of a point just below
+ * and to the right of the screen
+ * NOT on the screen!
+ * d5 = number of bytes per scan line
+ * d6 = number of bytes on the entire screen
+ */
+
+ lea %pc@(L(console_globals)),%a2
+ movel %pc@(L(mac_videobase)),%a1
+ movel %pc@(L(mac_rowbytes)),%d5
+ movel %pc@(L(mac_dimensions)),%d3 /* -> low byte */
+ movel %d3,%d4
+ swap %d4 /* -> high byte */
+ andl #0xffff,%d3 /* d3 = screen width in pixels */
+ andl #0xffff,%d4 /* d4 = screen height in pixels */
+
+ movel %d5,%d6
+| subl #20,%d6
+ mulul %d4,%d6 /* scan line bytes x num scan lines */
+ divul #8,%d6 /* we'll clear 8 bytes at a time */
+ moveq #-1,%d0 /* Mac_black */
+ subq #1,%d6
+
+L(console_clear_loop):
+ movel %d0,%a1@+
+ movel %d0,%a1@+
+ dbra %d6,L(console_clear_loop)
+
+ /* Calculate font size */
+
+#if defined(FONT_8x8) && defined(CONFIG_FONT_8x8)
+ lea %pc@(font_vga_8x8),%a0
+#elif defined(FONT_8x16) && defined(CONFIG_FONT_8x16)
+ lea %pc@(font_vga_8x16),%a0
+#elif defined(FONT_6x11) && defined(CONFIG_FONT_6x11)
+ lea %pc@(font_vga_6x11),%a0
+#elif defined(CONFIG_FONT_8x8) /* default */
+ lea %pc@(font_vga_8x8),%a0
+#else /* no compiled-in font */
+ lea 0,%a0
+#endif
+
+ /*
+ * At this point we make a shift in register usage
+ * a1 = address of console_font pointer
+ */
+ lea %pc@(L(console_font)),%a1
+ movel %a0,%a1@ /* store pointer to struct fbcon_font_desc in console_font */
+ tstl %a0
+ jeq 1f
+ lea %pc@(L(console_font_data)),%a4
+ movel %a0@(FONT_DESC_DATA),%d0
+ subl #L(console_font),%a1
+ addl %a1,%d0
+ movel %d0,%a4@
+
+ /*
+ * Calculate global maxs
+ * Note - we can use either an
+ * 8 x 16 or 8 x 8 character font
+ * 6 x 11 also supported
+ */
+ /* ASSERT: a0 = contents of Lconsole_font */
+ movel %d3,%d0 /* screen width in pixels */
+ divul %a0@(FONT_DESC_WIDTH),%d0 /* d0 = max num chars per row */
+
+ movel %d4,%d1 /* screen height in pixels */
+ divul %a0@(FONT_DESC_HEIGHT),%d1 /* d1 = max num rows */
+
+ movel %d0,%a2@(Lconsole_struct_num_columns)
+ movel %d1,%a2@(Lconsole_struct_num_rows)
+
+ /*
+ * Clear the current row and column
+ */
+ clrl %a2@(Lconsole_struct_cur_column)
+ clrl %a2@(Lconsole_struct_cur_row)
+ clrl %a2@(Lconsole_struct_left_edge)
+
+ /*
+ * Initialization is complete
+ */
+1:
+func_return console_init
+
+func_start console_put_stats,%a0/%d7
+ /*
+ * Some of the register usage that follows
+ * a0 = pointer to boot_info
+ * d7 = value of boot_info fields
+ */
+ puts "\nMacLinux\n\n"
+
+#ifdef SERIAL_DEBUG
+ puts " vidaddr:"
+ putn %pc@(L(mac_videobase)) /* video addr. */
+
+ puts "\n _stext:"
+ lea %pc@(_stext),%a0
+ putn %a0
+
+ puts "\nbootinfo:"
+ lea %pc@(_end),%a0
+ putn %a0
+
+ puts "\ncpuid:"
+ putn %pc@(L(cputype))
+ putc '\n'
+
+#ifdef MAC_SERIAL_DEBUG
+ putn %pc@(L(mac_sccbase))
+ putc '\n'
+#endif
+# if defined(MMU_PRINT)
+ jbsr mmu_print_machine_cpu_types
+# endif /* MMU_PRINT */
+#endif /* SERIAL_DEBUG */
+
+func_return console_put_stats
+
+#ifdef CONSOLE_PENGUIN
+func_start console_put_penguin,%a0-%a1/%d0-%d7
+ /*
+ * Get 'that_penguin' onto the screen in the upper right corner
+ * penguin is 64 x 74 pixels, align against right edge of screen
+ */
+ lea %pc@(L(mac_dimensions)),%a0
+ movel %a0@,%d0
+ andil #0xffff,%d0
+ subil #64,%d0 /* snug up against the right edge */
+ clrl %d1 /* start at the top */
+ movel #73,%d7
+ lea %pc@(L(that_penguin)),%a1
+L(console_penguin_row):
+ movel #31,%d6
+L(console_penguin_pixel_pair):
+ moveb %a1@,%d2
+ lsrb #4,%d2
+ console_plot_pixel %d0,%d1,%d2
+ addq #1,%d0
+ moveb %a1@+,%d2
+ console_plot_pixel %d0,%d1,%d2
+ addq #1,%d0
+ dbra %d6,L(console_penguin_pixel_pair)
+
+ subil #64,%d0
+ addq #1,%d1
+ dbra %d7,L(console_penguin_row)
+
+func_return console_put_penguin
+
+/* include penguin bitmap */
+L(that_penguin):
+#include "../mac/mac_penguin.S"
+#endif
+
+ /*
+ * Calculate source and destination addresses
+ * output a1 = dest
+ * a2 = source
+ */
+
+func_start console_scroll,%a0-%a4/%d0-%d7
+ lea %pc@(L(mac_videobase)),%a0
+ movel %a0@,%a1
+ movel %a1,%a2
+ lea %pc@(L(mac_rowbytes)),%a0
+ movel %a0@,%d5
+ movel %pc@(L(console_font)),%a0
+ tstl %a0
+ jeq 1f
+ mulul %a0@(FONT_DESC_HEIGHT),%d5 /* account for # scan lines per character */
+ addal %d5,%a2
+
+ /*
+ * Get dimensions
+ */
+ lea %pc@(L(mac_dimensions)),%a0
+ movel %a0@,%d3
+ movel %d3,%d4
+ swap %d4
+ andl #0xffff,%d3 /* d3 = screen width in pixels */
+ andl #0xffff,%d4 /* d4 = screen height in pixels */
+
+ /*
+ * Calculate number of bytes to move
+ */
+ lea %pc@(L(mac_rowbytes)),%a0
+ movel %a0@,%d6
+ movel %pc@(L(console_font)),%a0
+ subl %a0@(FONT_DESC_HEIGHT),%d4 /* we're not scrolling the top row! */
+ mulul %d4,%d6 /* scan line bytes x num scan lines */
+ divul #32,%d6 /* we'll move 8 longs at a time */
+ subq #1,%d6
+
+L(console_scroll_loop):
+ movel %a2@+,%a1@+
+ movel %a2@+,%a1@+
+ movel %a2@+,%a1@+
+ movel %a2@+,%a1@+
+ movel %a2@+,%a1@+
+ movel %a2@+,%a1@+
+ movel %a2@+,%a1@+
+ movel %a2@+,%a1@+
+ dbra %d6,L(console_scroll_loop)
+
+ lea %pc@(L(mac_rowbytes)),%a0
+ movel %a0@,%d6
+ movel %pc@(L(console_font)),%a0
+ mulul %a0@(FONT_DESC_HEIGHT),%d6 /* scan line bytes x font height */
+ divul #32,%d6 /* we'll move 8 words at a time */
+ subq #1,%d6
+
+ moveq #-1,%d0
+L(console_scroll_clear_loop):
+ movel %d0,%a1@+
+ movel %d0,%a1@+
+ movel %d0,%a1@+
+ movel %d0,%a1@+
+ movel %d0,%a1@+
+ movel %d0,%a1@+
+ movel %d0,%a1@+
+ movel %d0,%a1@+
+ dbra %d6,L(console_scroll_clear_loop)
+
+1:
+func_return console_scroll
+
+
+func_start console_putc,%a0/%a1/%d0-%d7
+
+ is_not_mac(L(console_exit))
+ tstl %pc@(L(console_font))
+ jeq L(console_exit)
+
+ /* Output character in d7 on console.
+ */
+ movel ARG1,%d7
+ cmpib #'\n',%d7
+ jbne 1f
+
+ /* A little safe recursion is good for the soul */
+ console_putc #'\r'
+1:
+ lea %pc@(L(console_globals)),%a0
+
+ cmpib #10,%d7
+ jne L(console_not_lf)
+ movel %a0@(Lconsole_struct_cur_row),%d0
+ addil #1,%d0
+ movel %d0,%a0@(Lconsole_struct_cur_row)
+ movel %a0@(Lconsole_struct_num_rows),%d1
+ cmpl %d1,%d0
+ jcs 1f
+ subil #1,%d0
+ movel %d0,%a0@(Lconsole_struct_cur_row)
+ console_scroll
+1:
+ jra L(console_exit)
+
+L(console_not_lf):
+ cmpib #13,%d7
+ jne L(console_not_cr)
+ clrl %a0@(Lconsole_struct_cur_column)
+ jra L(console_exit)
+
+L(console_not_cr):
+ cmpib #1,%d7
+ jne L(console_not_home)
+ clrl %a0@(Lconsole_struct_cur_row)
+ clrl %a0@(Lconsole_struct_cur_column)
+ jra L(console_exit)
+
+/*
+ * At this point we know that the %d7 character is going to be
+ * rendered on the screen. Register usage is -
+ * a0 = pointer to console globals
+ * a1 = font data
+ * d0 = cursor column
+ * d1 = cursor row to draw the character
+ * d7 = character number
+ */
+L(console_not_home):
+ movel %a0@(Lconsole_struct_cur_column),%d0
+ addql #1,%a0@(Lconsole_struct_cur_column)
+ movel %a0@(Lconsole_struct_num_columns),%d1
+ cmpl %d1,%d0
+ jcs 1f
+ console_putc #'\n' /* recursion is OK! */
+1:
+ movel %a0@(Lconsole_struct_cur_row),%d1
+
+ /*
+ * At this point we make a shift in register usage
+ * a0 = address of pointer to font data (fbcon_font_desc)
+ */
+ movel %pc@(L(console_font)),%a0
+ movel %pc@(L(console_font_data)),%a1 /* Load fbcon_font_desc.data into a1 */
+ andl #0x000000ff,%d7
+ /* ASSERT: a0 = contents of Lconsole_font */
+ mulul %a0@(FONT_DESC_HEIGHT),%d7 /* d7 = index into font data */
+ addl %d7,%a1 /* a1 = points to char image */
+
+ /*
+ * At this point we make a shift in register usage
+ * d0 = pixel coordinate, x
+ * d1 = pixel coordinate, y
+ * d2 = (bit 0) 1/0 for white/black (!) pixel on screen
+ * d3 = font scan line data (8 pixels)
+ * d6 = count down for the font's pixel width (8)
+ * d7 = count down for the font's pixel count in height
+ */
+ /* ASSERT: a0 = contents of Lconsole_font */
+ mulul %a0@(FONT_DESC_WIDTH),%d0
+ mulul %a0@(FONT_DESC_HEIGHT),%d1
+ movel %a0@(FONT_DESC_HEIGHT),%d7 /* Load fbcon_font_desc.height into d7 */
+ subq #1,%d7
+L(console_read_char_scanline):
+ moveb %a1@+,%d3
+
+ /* ASSERT: a0 = contents of Lconsole_font */
+ movel %a0@(FONT_DESC_WIDTH),%d6 /* Load fbcon_font_desc.width into d6 */
+ subql #1,%d6
+
+L(console_do_font_scanline):
+ lslb #1,%d3
+ scsb %d2 /* convert 1 bit into a byte */
+ console_plot_pixel %d0,%d1,%d2
+ addq #1,%d0
+ dbra %d6,L(console_do_font_scanline)
+
+ /* ASSERT: a0 = contents of Lconsole_font */
+ subl %a0@(FONT_DESC_WIDTH),%d0
+ addq #1,%d1
+ dbra %d7,L(console_read_char_scanline)
+
+L(console_exit):
+func_return console_putc
+
+ /*
+ * Input:
+ * d0 = x coordinate
+ * d1 = y coordinate
+ * d2 = (bit 0) 1/0 for white/black (!)
+ * All registers are preserved
+ */
+func_start console_plot_pixel,%a0-%a1/%d0-%d4
+
+ movel %pc@(L(mac_videobase)),%a1
+ movel %pc@(L(mac_videodepth)),%d3
+ movel ARG1,%d0
+ movel ARG2,%d1
+ mulul %pc@(L(mac_rowbytes)),%d1
+ movel ARG3,%d2
+
+ /*
+ * Register usage:
+ * d0 = x coord becomes byte offset into frame buffer
+ * d1 = y coord
+ * d2 = black or white (0/1)
+ * d3 = video depth
+ * d4 = temp of x (d0) for many bit depths
+ */
+L(test_1bit):
+ cmpb #1,%d3
+ jbne L(test_2bit)
+ movel %d0,%d4 /* we need the low order 3 bits! */
+ divul #8,%d0
+ addal %d0,%a1
+ addal %d1,%a1
+ andb #7,%d4
+ eorb #7,%d4 /* reverse the x-coordinate w/ screen-bit # */
+ andb #1,%d2
+ jbne L(white_1)
+ bsetb %d4,%a1@
+ jbra L(console_plot_pixel_exit)
+L(white_1):
+ bclrb %d4,%a1@
+ jbra L(console_plot_pixel_exit)
+
+L(test_2bit):
+ cmpb #2,%d3
+ jbne L(test_4bit)
+ movel %d0,%d4 /* we need the low order 2 bits! */
+ divul #4,%d0
+ addal %d0,%a1
+ addal %d1,%a1
+ andb #3,%d4
+ eorb #3,%d4 /* reverse the x-coordinate w/ screen-bit # */
+ lsll #1,%d4 /* ! */
+ andb #1,%d2
+ jbne L(white_2)
+ bsetb %d4,%a1@
+ addq #1,%d4
+ bsetb %d4,%a1@
+ jbra L(console_plot_pixel_exit)
+L(white_2):
+ bclrb %d4,%a1@
+ addq #1,%d4
+ bclrb %d4,%a1@
+ jbra L(console_plot_pixel_exit)
+
+L(test_4bit):
+ cmpb #4,%d3
+ jbne L(test_8bit)
+ movel %d0,%d4 /* we need the low order bit! */
+ divul #2,%d0
+ addal %d0,%a1
+ addal %d1,%a1
+ andb #1,%d4
+ eorb #1,%d4
+ lsll #2,%d4 /* ! */
+ andb #1,%d2
+ jbne L(white_4)
+ bsetb %d4,%a1@
+ addq #1,%d4
+ bsetb %d4,%a1@
+ addq #1,%d4
+ bsetb %d4,%a1@
+ addq #1,%d4
+ bsetb %d4,%a1@
+ jbra L(console_plot_pixel_exit)
+L(white_4):
+ bclrb %d4,%a1@
+ addq #1,%d4
+ bclrb %d4,%a1@
+ addq #1,%d4
+ bclrb %d4,%a1@
+ addq #1,%d4
+ bclrb %d4,%a1@
+ jbra L(console_plot_pixel_exit)
+
+L(test_8bit):
+ cmpb #8,%d3
+ jbne L(test_16bit)
+ addal %d0,%a1
+ addal %d1,%a1
+ andb #1,%d2
+ jbne L(white_8)
+ moveb #0xff,%a1@
+ jbra L(console_plot_pixel_exit)
+L(white_8):
+ clrb %a1@
+ jbra L(console_plot_pixel_exit)
+
+L(test_16bit):
+ cmpb #16,%d3
+ jbne L(console_plot_pixel_exit)
+ addal %d0,%a1
+ addal %d0,%a1
+ addal %d1,%a1
+ andb #1,%d2
+ jbne L(white_16)
+ clrw %a1@
+ jbra L(console_plot_pixel_exit)
+L(white_16):
+ movew #0x0fff,%a1@
+ jbra L(console_plot_pixel_exit)
+
+L(console_plot_pixel_exit):
+func_return console_plot_pixel
+#endif /* CONSOLE */
+
+#if 0
+/*
+ * This is some old code lying around. I don't believe
+ * it's used or important anymore. My guess is it contributed
+ * to getting to this point, but it's done for now.
+ * It was still in the 2.1.77 head.S, so it's still here.
+ * (And still not used!)
+ */
+L(showtest):
+ moveml %a0/%d7,%sp@-
+ puts "A="
+ putn %a1
+
+ .long 0xf0119f15 | ptestr #5,%a1@,#7,%a0
+
+ puts "DA="
+ putn %a0
+
+ puts "D="
+ putn %a0@
+
+ puts "S="
+ lea %pc@(L(mmu)),%a0
+ .long 0xf0106200 | pmove %psr,%a0@
+ clrl %d7
+ movew %a0@,%d7
+ putn %d7
+
+ putc '\n'
+ moveml %sp@+,%a0/%d7
+ rts
+#endif /* 0 */
+
+__INITDATA
+ .align 4
+
+#if defined(CONFIG_ATARI) || defined(CONFIG_AMIGA) || \
+ defined(CONFIG_HP300) || defined(CONFIG_APOLLO)
+L(custom):
+L(iobase):
+ .long 0
+#endif
+
+#if defined(CONSOLE)
+L(console_globals):
+ .long 0 /* cursor column */
+ .long 0 /* cursor row */
+ .long 0 /* max num columns */
+ .long 0 /* max num rows */
+ .long 0 /* left edge */
+ .long 0 /* mac putc */
+L(console_font):
+ .long 0 /* pointer to console font (struct font_desc) */
+L(console_font_data):
+ .long 0 /* pointer to console font data */
+#endif /* CONSOLE */
+
+#if defined(MMU_PRINT)
+L(mmu_print_data):
+ .long 0 /* valid flag */
+ .long 0 /* start logical */
+ .long 0 /* next logical */
+ .long 0 /* start physical */
+ .long 0 /* next physical */
+#endif /* MMU_PRINT */
+
+L(cputype):
+ .long 0
+L(mmu_cached_pointer_tables):
+ .long 0
+L(mmu_num_pointer_tables):
+ .long 0
+L(phys_kernel_start):
+ .long 0
+L(kernel_end):
+ .long 0
+L(memory_start):
+ .long 0
+L(kernel_pgdir_ptr):
+ .long 0
+L(temp_mmap_mem):
+ .long 0
+
+#if defined (CONFIG_MVME147)
+M147_SCC_CTRL_A = 0xfffe3002
+M147_SCC_DATA_A = 0xfffe3003
+#endif
+
+#if defined (CONFIG_MVME16x)
+M162_SCC_CTRL_A = 0xfff45005
+M167_CYCAR = 0xfff450ee
+M167_CYIER = 0xfff45011
+M167_CYLICR = 0xfff45026
+M167_CYTEOIR = 0xfff45085
+M167_CYTDR = 0xfff450f8
+M167_PCSCCTICR = 0xfff4201e
+M167_PCTPIACKR = 0xfff42025
+#endif
+
+#if defined (CONFIG_BVME6000)
+BVME_SCC_CTRL_A = 0xffb0000b
+BVME_SCC_DATA_A = 0xffb0000f
+#endif
+
+#if defined(CONFIG_MAC)
+L(mac_booter_data):
+ .long 0
+L(mac_videobase):
+ .long 0
+L(mac_videodepth):
+ .long 0
+L(mac_dimensions):
+ .long 0
+L(mac_rowbytes):
+ .long 0
+#ifdef MAC_SERIAL_DEBUG
+L(mac_sccbase):
+ .long 0
+#endif /* MAC_SERIAL_DEBUG */
+#endif
+
+#if defined (CONFIG_APOLLO)
+LSRB0 = 0x10412
+LTHRB0 = 0x10416
+LCPUCTRL = 0x10100
+#endif
+
+#if defined(CONFIG_HP300)
+DCADATA = 0x11
+DCALSR = 0x1b
+APCIDATA = 0x00
+APCILSR = 0x14
+L(uartbase):
+ .long 0
+L(uart_scode):
+ .long -1
+#endif
+
+__FINIT
+ .data
+ .align 4
+
+availmem:
+ .long 0
+m68k_pgtable_cachemode:
+ .long 0
+m68k_supervisor_cachemode:
+ .long 0
+#if defined(CONFIG_MVME16x)
+mvme_bdid:
+ .long 0,0,0,0,0,0,0,0
+#endif
+#if defined(CONFIG_Q40)
+q40_mem_cptr:
+ .long 0
+L(q40_do_debug):
+ .long 0
+#endif