diff options
Diffstat (limited to 'arch/mips/alchemy/devboards/db1x00/board_setup.c')
| -rw-r--r-- | arch/mips/alchemy/devboards/db1x00/board_setup.c | 105 |
1 files changed, 1 insertions, 104 deletions
diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c index 7cd36e631f6c..8a222b3eba32 100644 --- a/arch/mips/alchemy/devboards/db1x00/board_setup.c +++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c @@ -40,64 +40,10 @@ #include <prom.h> -#ifdef CONFIG_MIPS_BOSPORUS -char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI */ - [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - SN1741 */ - [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */ -}; - -/* - * Micrel/Kendin 5 port switch attached to MAC0, - * MAC0 is associated with PHY address 5 (== WAN port) - * MAC1 is not associated with any PHY, since it's connected directly - * to the switch. - * no interrupts are used - */ -static struct au1000_eth_platform_data eth0_pdata = { - .phy_static_config = 1, - .phy_addr = 5, -}; - -static void bosporus_power_off(void) -{ - while (1) - asm volatile (".set mips3 ; wait ; .set mips0"); -} - -const char *get_system_type(void) -{ - return "Alchemy Bosporus Gateway Reference"; -} -#endif - - -#ifdef CONFIG_MIPS_MIRAGE -static void mirage_power_off(void) -{ - alchemy_gpio_direction_output(210, 1); -} - -const char *get_system_type(void) -{ - return "Alchemy Mirage"; -} -#endif - - -#if defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE) -static void mips_softreset(void) -{ - asm volatile ("jr\t%0" : : "r"(0xbfc00000)); -} - -#else - const char *get_system_type(void) { return "Alchemy Db1x00"; } -#endif void __init board_setup(void) @@ -116,14 +62,6 @@ void __init board_setup(void) #ifdef CONFIG_MIPS_DB1100 printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n"); #endif -#ifdef CONFIG_MIPS_BOSPORUS - au1xxx_override_eth_cfg(0, ð0_pdata); - - printk(KERN_INFO "AMD Alchemy Bosporus Board\n"); -#endif -#ifdef CONFIG_MIPS_MIRAGE - printk(KERN_INFO "AMD Alchemy Mirage Board\n"); -#endif #ifdef CONFIG_MIPS_DB1550 printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n"); @@ -150,52 +88,11 @@ void __init board_setup(void) /* Enable GPIO[31:0] inputs */ alchemy_gpio1_input_enable(); - -#ifdef CONFIG_MIPS_MIRAGE - { - u32 pin_func; - - /* GPIO[20] is output */ - alchemy_gpio_direction_output(20, 0); - - /* Set GPIO[210:208] instead of SSI_0 */ - pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0; - - /* Set GPIO[215:211] for LEDs */ - pin_func |= 5 << 2; - - /* Set GPIO[214:213] for more LEDs */ - pin_func |= 5 << 12; - - /* Set GPIO[207:200] instead of PCMCIA/LCD */ - pin_func |= SYS_PF_LCD | SYS_PF_PC; - au_writel(pin_func, SYS_PINFUNC); - - /* - * Enable speaker amplifier. This should - * be part of the audio driver. - */ - alchemy_gpio_direction_output(209, 1); - - pm_power_off = mirage_power_off; - _machine_halt = mirage_power_off; - _machine_restart = (void(*)(char *))mips_softreset; - } -#endif - -#ifdef CONFIG_MIPS_BOSPORUS - pm_power_off = bosporus_power_off; - _machine_halt = bosporus_power_off; - _machine_restart = (void(*)(char *))mips_softreset; -#endif - au_sync(); } static int __init db1x00_init_irq(void) { -#if defined(CONFIG_MIPS_MIRAGE) - irq_set_irq_type(AU1500_GPIO7_INT, IRQF_TRIGGER_RISING); /* TS pendown */ -#elif defined(CONFIG_MIPS_DB1550) +#if defined(CONFIG_MIPS_DB1550) irq_set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ irq_set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW); /* CD1# */ irq_set_irq_type(AU1550_GPIO3_INT, IRQF_TRIGGER_LOW); /* CARD0# */ |