diff options
Diffstat (limited to 'arch/mips/powertv/asic/asic-cronus.c')
| -rw-r--r-- | arch/mips/powertv/asic/asic-cronus.c | 101 |
1 files changed, 101 insertions, 0 deletions
diff --git a/arch/mips/powertv/asic/asic-cronus.c b/arch/mips/powertv/asic/asic-cronus.c new file mode 100644 index 000000000000..5bb64bfb508b --- /dev/null +++ b/arch/mips/powertv/asic/asic-cronus.c @@ -0,0 +1,101 @@ +/* + * Locations of devices in the Cronus ASIC + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef <ds@schleef.org> + * + * Description: Defines the platform resources for the SA settop. + */ + +#include <linux/init.h> +#include <asm/mach-powertv/asic.h> + +#define CRONUS_ADDR(x) (CRONUS_IO_BASE + (x)) + +const struct register_map cronus_register_map __initdata = { + .eic_slow0_strt_add = {.phys = CRONUS_ADDR(0x000000)}, + .eic_cfg_bits = {.phys = CRONUS_ADDR(0x000038)}, + .eic_ready_status = {.phys = CRONUS_ADDR(0x00004C)}, + + .chipver3 = {.phys = CRONUS_ADDR(0x2A0800)}, + .chipver2 = {.phys = CRONUS_ADDR(0x2A0804)}, + .chipver1 = {.phys = CRONUS_ADDR(0x2A0808)}, + .chipver0 = {.phys = CRONUS_ADDR(0x2A080C)}, + + /* The registers of IRBlaster */ + .uart1_intstat = {.phys = CRONUS_ADDR(0x2A1800)}, + .uart1_inten = {.phys = CRONUS_ADDR(0x2A1804)}, + .uart1_config1 = {.phys = CRONUS_ADDR(0x2A1808)}, + .uart1_config2 = {.phys = CRONUS_ADDR(0x2A180C)}, + .uart1_divisorhi = {.phys = CRONUS_ADDR(0x2A1810)}, + .uart1_divisorlo = {.phys = CRONUS_ADDR(0x2A1814)}, + .uart1_data = {.phys = CRONUS_ADDR(0x2A1818)}, + .uart1_status = {.phys = CRONUS_ADDR(0x2A181C)}, + + .int_stat_3 = {.phys = CRONUS_ADDR(0x2A2800)}, + .int_stat_2 = {.phys = CRONUS_ADDR(0x2A2804)}, + .int_stat_1 = {.phys = CRONUS_ADDR(0x2A2808)}, + .int_stat_0 = {.phys = CRONUS_ADDR(0x2A280C)}, + .int_config = {.phys = CRONUS_ADDR(0x2A2810)}, + .int_int_scan = {.phys = CRONUS_ADDR(0x2A2818)}, + .ien_int_3 = {.phys = CRONUS_ADDR(0x2A2830)}, + .ien_int_2 = {.phys = CRONUS_ADDR(0x2A2834)}, + .ien_int_1 = {.phys = CRONUS_ADDR(0x2A2838)}, + .ien_int_0 = {.phys = CRONUS_ADDR(0x2A283C)}, + .int_level_3_3 = {.phys = CRONUS_ADDR(0x2A2880)}, + .int_level_3_2 = {.phys = CRONUS_ADDR(0x2A2884)}, + .int_level_3_1 = {.phys = CRONUS_ADDR(0x2A2888)}, + .int_level_3_0 = {.phys = CRONUS_ADDR(0x2A288C)}, + .int_level_2_3 = {.phys = CRONUS_ADDR(0x2A2890)}, + .int_level_2_2 = {.phys = CRONUS_ADDR(0x2A2894)}, + .int_level_2_1 = {.phys = CRONUS_ADDR(0x2A2898)}, + .int_level_2_0 = {.phys = CRONUS_ADDR(0x2A289C)}, + .int_level_1_3 = {.phys = CRONUS_ADDR(0x2A28A0)}, + .int_level_1_2 = {.phys = CRONUS_ADDR(0x2A28A4)}, + .int_level_1_1 = {.phys = CRONUS_ADDR(0x2A28A8)}, + .int_level_1_0 = {.phys = CRONUS_ADDR(0x2A28AC)}, + .int_level_0_3 = {.phys = CRONUS_ADDR(0x2A28B0)}, + .int_level_0_2 = {.phys = CRONUS_ADDR(0x2A28B4)}, + .int_level_0_1 = {.phys = CRONUS_ADDR(0x2A28B8)}, + .int_level_0_0 = {.phys = CRONUS_ADDR(0x2A28BC)}, + .int_docsis_en = {.phys = CRONUS_ADDR(0x2A28F4)}, + + .mips_pll_setup = {.phys = CRONUS_ADDR(0x1C0000)}, + .usb_fs = {.phys = CRONUS_ADDR(0x1C0018)}, + .test_bus = {.phys = CRONUS_ADDR(0x1C00CC)}, + .crt_spare = {.phys = CRONUS_ADDR(0x1c00d4)}, + .usb2_ohci_int_mask = {.phys = CRONUS_ADDR(0x20000C)}, + .usb2_strap = {.phys = CRONUS_ADDR(0x200014)}, + .ehci_hcapbase = {.phys = CRONUS_ADDR(0x21FE00)}, + .ohci_hc_revision = {.phys = CRONUS_ADDR(0x1E0000)}, + .bcm1_bs_lmi_steer = {.phys = CRONUS_ADDR(0x2E0008)}, + .usb2_control = {.phys = CRONUS_ADDR(0x2E004C)}, + .usb2_stbus_obc = {.phys = CRONUS_ADDR(0x21FF00)}, + .usb2_stbus_mess_size = {.phys = CRONUS_ADDR(0x21FF04)}, + .usb2_stbus_chunk_size = {.phys = CRONUS_ADDR(0x21FF08)}, + + .pcie_regs = {.phys = CRONUS_ADDR(0x220000)}, + .tim_ch = {.phys = CRONUS_ADDR(0x2A2C10)}, + .tim_cl = {.phys = CRONUS_ADDR(0x2A2C14)}, + .gpio_dout = {.phys = CRONUS_ADDR(0x2A2C20)}, + .gpio_din = {.phys = CRONUS_ADDR(0x2A2C24)}, + .gpio_dir = {.phys = CRONUS_ADDR(0x2A2C2C)}, + .watchdog = {.phys = CRONUS_ADDR(0x2A2C30)}, + .front_panel = {.phys = CRONUS_ADDR(0x2A3800)}, +}; |