summaryrefslogtreecommitdiffstats
path: root/arch/ppc/platforms/4xx/ocotea.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/platforms/4xx/ocotea.c')
-rw-r--r--arch/ppc/platforms/4xx/ocotea.c367
1 files changed, 367 insertions, 0 deletions
diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
new file mode 100644
index 000000000000..28de707434f1
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ocotea.c
@@ -0,0 +1,367 @@
+/*
+ * arch/ppc/platforms/4xx/ocotea.c
+ *
+ * Ocotea board specific routines
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright 2003-2005 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/initrd.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ocp.h>
+#include <asm/pci-bridge.h>
+#include <asm/time.h>
+#include <asm/todc.h>
+#include <asm/bootinfo.h>
+#include <asm/ppc4xx_pic.h>
+#include <asm/ppcboot.h>
+
+#include <syslib/gen550.h>
+#include <syslib/ibm440gx_common.h>
+
+/*
+ * This is a horrible kludge, we eventually need to abstract this
+ * generic PHY stuff, so the standard phy mode defines can be
+ * easily used from arch code.
+ */
+#include "../../../../drivers/net/ibm_emac/ibm_emac_phy.h"
+
+bd_t __res;
+
+static struct ibm44x_clocks clocks __initdata;
+
+static void __init
+ocotea_calibrate_decr(void)
+{
+ unsigned int freq;
+
+ if (mfspr(SPRN_CCR1) & CCR1_TCS)
+ freq = OCOTEA_TMR_CLK;
+ else
+ freq = clocks.cpu;
+
+ ibm44x_calibrate_decr(freq);
+}
+
+static int
+ocotea_show_cpuinfo(struct seq_file *m)
+{
+ seq_printf(m, "vendor\t\t: IBM\n");
+ seq_printf(m, "machine\t\t: PPC440GX EVB (Ocotea)\n");
+ ibm440gx_show_cpuinfo(m);
+ return 0;
+}
+
+static inline int
+ocotea_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ { 23, 23, 23, 23 }, /* IDSEL 1 - PCI Slot 0 */
+ { 24, 24, 24, 24 }, /* IDSEL 2 - PCI Slot 1 */
+ { 25, 25, 25, 25 }, /* IDSEL 3 - PCI Slot 2 */
+ { 26, 26, 26, 26 }, /* IDSEL 4 - PCI Slot 3 */
+ };
+
+ const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+
+static void __init ocotea_set_emacdata(void)
+{
+ struct ocp_def *def;
+ struct ocp_func_emac_data *emacdata;
+ int i;
+
+ /*
+ * Note: Current rev. board only operates in Group 4a
+ * mode, so we always set EMAC0-1 for SMII and EMAC2-3
+ * for RGMII (though these could run in RTBI just the same).
+ *
+ * The FPGA reg 3 information isn't even suitable for
+ * determining the phy_mode, so if the board becomes
+ * usable in !4a, it will be necessary to parse an environment
+ * variable from the firmware or similar to properly configure
+ * the phy_map/phy_mode.
+ */
+ /* Set phy_map, phy_mode, and mac_addr for each EMAC */
+ for (i=0; i<4; i++) {
+ def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
+ emacdata = def->additions;
+ if (i < 2) {
+ emacdata->phy_map = 0x00000001; /* Skip 0x00 */
+ emacdata->phy_mode = PHY_MODE_SMII;
+ }
+ else {
+ emacdata->phy_map = 0x0000ffff; /* Skip 0x00-0x0f */
+ emacdata->phy_mode = PHY_MODE_RGMII;
+ }
+ if (i == 0)
+ memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
+ else if (i == 1)
+ memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
+ else if (i == 2)
+ memcpy(emacdata->mac_addr, __res.bi_enet2addr, 6);
+ else if (i == 3)
+ memcpy(emacdata->mac_addr, __res.bi_enet3addr, 6);
+ }
+}
+
+#define PCIX_READW(offset) \
+ (readw(pcix_reg_base+offset))
+
+#define PCIX_WRITEW(value, offset) \
+ (writew(value, pcix_reg_base+offset))
+
+#define PCIX_WRITEL(value, offset) \
+ (writel(value, pcix_reg_base+offset))
+
+/*
+ * FIXME: This is only here to "make it work". This will move
+ * to a ibm_pcix.c which will contain a generic IBM PCIX bridge
+ * configuration library. -Matt
+ */
+static void __init
+ocotea_setup_pcix(void)
+{
+ void *pcix_reg_base;
+
+ pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX_REG_SIZE);
+
+ /* Enable PCIX0 I/O, Mem, and Busmaster cycles */
+ PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND);
+
+ /* Disable all windows */
+ PCIX_WRITEL(0, PCIX0_POM0SA);
+ PCIX_WRITEL(0, PCIX0_POM1SA);
+ PCIX_WRITEL(0, PCIX0_POM2SA);
+ PCIX_WRITEL(0, PCIX0_PIM0SA);
+ PCIX_WRITEL(0, PCIX0_PIM0SAH);
+ PCIX_WRITEL(0, PCIX0_PIM1SA);
+ PCIX_WRITEL(0, PCIX0_PIM2SA);
+ PCIX_WRITEL(0, PCIX0_PIM2SAH);
+
+ /* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */
+ PCIX_WRITEL(0x00000003, PCIX0_POM0LAH);
+ PCIX_WRITEL(0x80000000, PCIX0_POM0LAL);
+ PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
+ PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL);
+ PCIX_WRITEL(0x80000001, PCIX0_POM0SA);
+
+ /* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
+ PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
+ PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
+ PCIX_WRITEL(0xe0000007, PCIX0_PIM0SA);
+
+ eieio();
+}
+
+static void __init
+ocotea_setup_hose(void)
+{
+ struct pci_controller *hose;
+
+ /* Configure windows on the PCI-X host bridge */
+ ocotea_setup_pcix();
+
+ hose = pcibios_alloc_controller();
+
+ if (!hose)
+ return;
+
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ hose->pci_mem_offset = OCOTEA_PCI_MEM_OFFSET;
+
+ pci_init_resource(&hose->io_resource,
+ OCOTEA_PCI_LOWER_IO,
+ OCOTEA_PCI_UPPER_IO,
+ IORESOURCE_IO,
+ "PCI host bridge");
+
+ pci_init_resource(&hose->mem_resources[0],
+ OCOTEA_PCI_LOWER_MEM,
+ OCOTEA_PCI_UPPER_MEM,
+ IORESOURCE_MEM,
+ "PCI host bridge");
+
+ hose->io_space.start = OCOTEA_PCI_LOWER_IO;
+ hose->io_space.end = OCOTEA_PCI_UPPER_IO;
+ hose->mem_space.start = OCOTEA_PCI_LOWER_MEM;
+ hose->mem_space.end = OCOTEA_PCI_UPPER_MEM;
+ isa_io_base =
+ (unsigned long)ioremap64(OCOTEA_PCI_IO_BASE, OCOTEA_PCI_IO_SIZE);
+ hose->io_base_virt = (void *)isa_io_base;
+
+ setup_indirect_pci(hose,
+ OCOTEA_PCI_CFGA_PLB32,
+ OCOTEA_PCI_CFGD_PLB32);
+ hose->set_cfg_type = 1;
+
+ hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
+
+ ppc_md.pci_swizzle = common_swizzle;
+ ppc_md.pci_map_irq = ocotea_map_irq;
+}
+
+
+TODC_ALLOC();
+
+static void __init
+ocotea_early_serial_map(void)
+{
+ struct uart_port port;
+
+ /* Setup ioremapped serial port access */
+ memset(&port, 0, sizeof(port));
+ port.membase = ioremap64(PPC440GX_UART0_ADDR, 8);
+ port.irq = UART0_INT;
+ port.uartclk = clocks.uart0;
+ port.regshift = 0;
+ port.iotype = SERIAL_IO_MEM;
+ port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.line = 0;
+
+ if (early_serial_setup(&port) != 0) {
+ printk("Early serial init of port 0 failed\n");
+ }
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+ /* Configure debug serial access */
+ gen550_init(0, &port);
+#endif
+
+ port.membase = ioremap64(PPC440GX_UART1_ADDR, 8);
+ port.irq = UART1_INT;
+ port.uartclk = clocks.uart1;
+ port.line = 1;
+
+ if (early_serial_setup(&port) != 0) {
+ printk("Early serial init of port 1 failed\n");
+ }
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+ /* Configure debug serial access */
+ gen550_init(1, &port);
+#endif
+}
+
+static void __init
+ocotea_setup_arch(void)
+{
+ ocotea_set_emacdata();
+
+ ibm440gx_tah_enable();
+
+ /* Setup TODC access */
+ TODC_INIT(TODC_TYPE_DS1743,
+ 0,
+ 0,
+ ioremap64(OCOTEA_RTC_ADDR, OCOTEA_RTC_SIZE),
+ 8);
+
+ /* init to some ~sane value until calibrate_delay() runs */
+ loops_per_jiffy = 50000000/HZ;
+
+ /* Setup PCI host bridge */
+ ocotea_setup_hose();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+
+ ocotea_early_serial_map();
+
+ /* Identify the system */
+ printk("IBM Ocotea port (MontaVista Software, Inc. <source@mvista.com>)\n");
+}
+
+static void __init ocotea_init(void)
+{
+ ibm440gx_l2c_setup(&clocks);
+}
+
+void __init platform_init(unsigned long r3, unsigned long r4,
+ unsigned long r5, unsigned long r6, unsigned long r7)
+{
+ parse_bootinfo(find_bootinfo());
+
+ /*
+ * If we were passed in a board information, copy it into the
+ * residual data area.
+ */
+ if (r3)
+ __res = *(bd_t *)(r3 + KERNELBASE);
+
+ /*
+ * Determine various clocks.
+ * To be completely correct we should get SysClk
+ * from FPGA, because it can be changed by on-board switches
+ * --ebs
+ */
+ ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
+ ocp_sys_info.opb_bus_freq = clocks.opb;
+
+ ibm44x_platform_init();
+
+ ppc_md.setup_arch = ocotea_setup_arch;
+ ppc_md.show_cpuinfo = ocotea_show_cpuinfo;
+ ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */
+
+ ppc_md.calibrate_decr = ocotea_calibrate_decr;
+ ppc_md.time_init = todc_time_init;
+ ppc_md.set_rtc_time = todc_set_rtc_time;
+ ppc_md.get_rtc_time = todc_get_rtc_time;
+
+ ppc_md.nvram_read_val = todc_direct_read_val;
+ ppc_md.nvram_write_val = todc_direct_write_val;
+#ifdef CONFIG_KGDB
+ ppc_md.early_serial_map = ocotea_early_serial_map;
+#endif
+ ppc_md.init = ocotea_init;
+}