summaryrefslogtreecommitdiffstats
path: root/arch/ppc/platforms/lite5200.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/platforms/lite5200.c')
-rw-r--r--arch/ppc/platforms/lite5200.c71
1 files changed, 40 insertions, 31 deletions
diff --git a/arch/ppc/platforms/lite5200.c b/arch/ppc/platforms/lite5200.c
index 5171b53bccb5..fecbe9adc9e0 100644
--- a/arch/ppc/platforms/lite5200.c
+++ b/arch/ppc/platforms/lite5200.c
@@ -34,8 +34,7 @@
#include <asm/mpc52xx.h>
#include <asm/ppc_sys.h>
#include <asm/machdep.h>
-
-#include <syslib/mpc52xx_pci.h>
+#include <asm/pci-bridge.h>
extern int powersave_nap;
@@ -68,44 +67,53 @@ lite5200_show_cpuinfo(struct seq_file *m)
}
#ifdef CONFIG_PCI
+#ifdef CONFIG_LITE5200B
+static int
+lite5200_map_irq(struct pci_dev *dev, unsigned char idsel,
+ unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ {MPC52xx_IRQ0, MPC52xx_IRQ1, MPC52xx_IRQ2, MPC52xx_IRQ3},
+ {MPC52xx_IRQ1, MPC52xx_IRQ2, MPC52xx_IRQ3, MPC52xx_IRQ0},
+ };
+
+ const long min_idsel = 24, max_idsel = 25, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+#else /* Original Lite */
static int
lite5200_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
{
return (pin == 1) && (idsel==24) ? MPC52xx_IRQ0 : -1;
}
#endif
+#endif
static void __init
lite5200_setup_cpu(void)
{
- struct mpc52xx_cdm __iomem *cdm;
struct mpc52xx_gpio __iomem *gpio;
struct mpc52xx_intr __iomem *intr;
- struct mpc52xx_xlb __iomem *xlb;
u32 port_config;
u32 intr_ctrl;
/* Map zones */
- cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
gpio = ioremap(MPC52xx_PA(MPC52xx_GPIO_OFFSET), MPC52xx_GPIO_SIZE);
- xlb = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE);
intr = ioremap(MPC52xx_PA(MPC52xx_INTR_OFFSET), MPC52xx_INTR_SIZE);
- if (!cdm || !gpio || !xlb || !intr) {
- printk("lite5200.c: Error while mapping CDM/GPIO/XLB/INTR during"
- "lite5200_setup_cpu\n");
+ if (!gpio || !intr) {
+ printk(KERN_ERR __FILE__ ": "
+ "Error while mapping GPIO/INTR during "
+ "lite5200_setup_cpu\n");
goto unmap_regs;
}
- /* Use internal 48 Mhz */
- out_8(&cdm->ext_48mhz_en, 0x00);
- out_8(&cdm->fd_enable, 0x01);
- if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */
- out_be16(&cdm->fd_counters, 0x0001);
- else
- out_be16(&cdm->fd_counters, 0x5555);
-
/* Get port mux config */
port_config = in_be32(&gpio->port_config);
@@ -116,29 +124,29 @@ lite5200_setup_cpu(void)
port_config &= ~0x00007000; /* Differential mode - USB1 only */
port_config |= 0x00001000;
+ /* ATA CS is on csb_4/5 */
+ port_config &= ~0x03000000;
+ port_config |= 0x01000000;
+
/* Commit port config */
out_be32(&gpio->port_config, port_config);
- /* Configure the XLB Arbiter */
- out_be32(&xlb->master_pri_enable, 0xff);
- out_be32(&xlb->master_priority, 0x11111111);
-
- /* Enable ram snooping for 1GB window */
- out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP);
- out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d);
-
- /* IRQ[0-3] setup : IRQ0 - Level Active Low */
- /* IRQ[1-3] - Level Active High */
+ /* IRQ[0-3] setup */
intr_ctrl = in_be32(&intr->ctrl);
intr_ctrl &= ~0x00ff0000;
- intr_ctrl |= 0x00c00000;
+#ifdef CONFIG_LITE5200B
+ /* IRQ[0-3] Level Active Low */
+ intr_ctrl |= 0x00ff0000;
+#else
+ /* IRQ0 Level Active Low
+ * IRQ[1-3] Level Active High */
+ intr_ctrl |= 0x00c00000;
+#endif
out_be32(&intr->ctrl, intr_ctrl);
/* Unmap reg zone */
unmap_regs:
- if (cdm) iounmap(cdm);
if (gpio) iounmap(gpio);
- if (xlb) iounmap(xlb);
if (intr) iounmap(intr);
}
@@ -146,7 +154,8 @@ static void __init
lite5200_setup_arch(void)
{
/* CPU & Port mux setup */
- lite5200_setup_cpu();
+ mpc52xx_setup_cpu(); /* Generic */
+ lite5200_setup_cpu(); /* Platform specific */
#ifdef CONFIG_PCI
/* PCI Bridge setup */