summaryrefslogtreecommitdiffstats
path: root/arch/ppc/syslib/ppc4xx_dma.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/syslib/ppc4xx_dma.c')
-rw-r--r--arch/ppc/syslib/ppc4xx_dma.c708
1 files changed, 708 insertions, 0 deletions
diff --git a/arch/ppc/syslib/ppc4xx_dma.c b/arch/ppc/syslib/ppc4xx_dma.c
new file mode 100644
index 000000000000..5015ab99afd2
--- /dev/null
+++ b/arch/ppc/syslib/ppc4xx_dma.c
@@ -0,0 +1,708 @@
+/*
+ * arch/ppc/kernel/ppc4xx_dma.c
+ *
+ * IBM PPC4xx DMA engine core library
+ *
+ * Copyright 2000-2004 MontaVista Software Inc.
+ *
+ * Cleaned up and converted to new DCR access
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Original code by Armin Kuster <akuster@mvista.com>
+ * and Pete Popov <ppopov@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/miscdevice.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/ppc4xx_dma.h>
+
+ppc_dma_ch_t dma_channels[MAX_PPC4xx_DMA_CHANNELS];
+
+int
+ppc4xx_get_dma_status(void)
+{
+ return (mfdcr(DCRN_DMASR));
+}
+
+void
+ppc4xx_set_src_addr(int dmanr, phys_addr_t src_addr)
+{
+ if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+ printk("set_src_addr: bad channel: %d\n", dmanr);
+ return;
+ }
+
+#ifdef PPC4xx_DMA_64BIT
+ mtdcr(DCRN_DMASAH0 + dmanr*2, (u32)(src_addr >> 32));
+#else
+ mtdcr(DCRN_DMASA0 + dmanr*2, (u32)src_addr);
+#endif
+}
+
+void
+ppc4xx_set_dst_addr(int dmanr, phys_addr_t dst_addr)
+{
+ if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+ printk("set_dst_addr: bad channel: %d\n", dmanr);
+ return;
+ }
+
+#ifdef PPC4xx_DMA_64BIT
+ mtdcr(DCRN_DMADAH0 + dmanr*2, (u32)(dst_addr >> 32));
+#else
+ mtdcr(DCRN_DMADA0 + dmanr*2, (u32)dst_addr);
+#endif
+}
+
+void
+ppc4xx_enable_dma(unsigned int dmanr)
+{
+ unsigned int control;
+ ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
+ unsigned int status_bits[] = { DMA_CS0 | DMA_TS0 | DMA_CH0_ERR,
+ DMA_CS1 | DMA_TS1 | DMA_CH1_ERR,
+ DMA_CS2 | DMA_TS2 | DMA_CH2_ERR,
+ DMA_CS3 | DMA_TS3 | DMA_CH3_ERR};
+
+ if (p_dma_ch->in_use) {
+ printk("enable_dma: channel %d in use\n", dmanr);
+ return;
+ }
+
+ if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+ printk("enable_dma: bad channel: %d\n", dmanr);
+ return;
+ }
+
+ if (p_dma_ch->mode == DMA_MODE_READ) {
+ /* peripheral to memory */
+ ppc4xx_set_src_addr(dmanr, 0);
+ ppc4xx_set_dst_addr(dmanr, p_dma_ch->addr);
+ } else if (p_dma_ch->mode == DMA_MODE_WRITE) {
+ /* memory to peripheral */
+ ppc4xx_set_src_addr(dmanr, p_dma_ch->addr);
+ ppc4xx_set_dst_addr(dmanr, 0);
+ }
+
+ /* for other xfer modes, the addresses are already set */
+ control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
+
+ control &= ~(DMA_TM_MASK | DMA_TD); /* clear all mode bits */
+ if (p_dma_ch->mode == DMA_MODE_MM) {
+ /* software initiated memory to memory */
+ control |= DMA_ETD_OUTPUT | DMA_TCE_ENABLE;
+ }
+
+ mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
+
+ /*
+ * Clear the CS, TS, RI bits for the channel from DMASR. This
+ * has been observed to happen correctly only after the mode and
+ * ETD/DCE bits in DMACRx are set above. Must do this before
+ * enabling the channel.
+ */
+
+ mtdcr(DCRN_DMASR, status_bits[dmanr]);
+
+ /*
+ * For device-paced transfers, Terminal Count Enable apparently
+ * must be on, and this must be turned on after the mode, etc.
+ * bits are cleared above (at least on Redwood-6).
+ */
+
+ if ((p_dma_ch->mode == DMA_MODE_MM_DEVATDST) ||
+ (p_dma_ch->mode == DMA_MODE_MM_DEVATSRC))
+ control |= DMA_TCE_ENABLE;
+
+ /*
+ * Now enable the channel.
+ */
+
+ control |= (p_dma_ch->mode | DMA_CE_ENABLE);
+
+ mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
+
+ p_dma_ch->in_use = 1;
+}
+
+void
+ppc4xx_disable_dma(unsigned int dmanr)
+{
+ unsigned int control;
+ ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
+
+ if (!p_dma_ch->in_use) {
+ printk("disable_dma: channel %d not in use\n", dmanr);
+ return;
+ }
+
+ if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+ printk("disable_dma: bad channel: %d\n", dmanr);
+ return;
+ }
+
+ control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
+ control &= ~DMA_CE_ENABLE;
+ mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
+
+ p_dma_ch->in_use = 0;
+}
+
+/*
+ * Sets the dma mode for single DMA transfers only.
+ * For scatter/gather transfers, the mode is passed to the
+ * alloc_dma_handle() function as one of the parameters.
+ *
+ * The mode is simply saved and used later. This allows
+ * the driver to call set_dma_mode() and set_dma_addr() in
+ * any order.
+ *
+ * Valid mode values are:
+ *
+ * DMA_MODE_READ peripheral to memory
+ * DMA_MODE_WRITE memory to peripheral
+ * DMA_MODE_MM memory to memory
+ * DMA_MODE_MM_DEVATSRC device-paced memory to memory, device at src
+ * DMA_MODE_MM_DEVATDST device-paced memory to memory, device at dst
+ */
+int
+ppc4xx_set_dma_mode(unsigned int dmanr, unsigned int mode)
+{
+ ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
+
+ if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+ printk("set_dma_mode: bad channel 0x%x\n", dmanr);
+ return DMA_STATUS_BAD_CHANNEL;
+ }
+
+ p_dma_ch->mode = mode;
+
+ return DMA_STATUS_GOOD;
+}
+
+/*
+ * Sets the DMA Count register. Note that 'count' is in bytes.
+ * However, the DMA Count register counts the number of "transfers",
+ * where each transfer is equal to the bus width. Thus, count
+ * MUST be a multiple of the bus width.
+ */
+void
+ppc4xx_set_dma_count(unsigned int dmanr, unsigned int count)
+{
+ ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
+
+#ifdef DEBUG_4xxDMA
+ {
+ int error = 0;
+ switch (p_dma_ch->pwidth) {
+ case PW_8:
+ break;
+ case PW_16:
+ if (count & 0x1)
+ error = 1;
+ break;
+ case PW_32:
+ if (count & 0x3)
+ error = 1;
+ break;
+ case PW_64:
+ if (count & 0x7)
+ error = 1;
+ break;
+ default:
+ printk("set_dma_count: invalid bus width: 0x%x\n",
+ p_dma_ch->pwidth);
+ return;
+ }
+ if (error)
+ printk
+ ("Warning: set_dma_count count 0x%x bus width %d\n",
+ count, p_dma_ch->pwidth);
+ }
+#endif
+
+ count = count >> p_dma_ch->shift;
+
+ mtdcr(DCRN_DMACT0 + (dmanr * 0x8), count);
+}
+
+/*
+ * Returns the number of bytes left to be transfered.
+ * After a DMA transfer, this should return zero.
+ * Reading this while a DMA transfer is still in progress will return
+ * unpredictable results.
+ */
+int
+ppc4xx_get_dma_residue(unsigned int dmanr)
+{
+ unsigned int count;
+ ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
+
+ if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+ printk("ppc4xx_get_dma_residue: bad channel 0x%x\n", dmanr);
+ return DMA_STATUS_BAD_CHANNEL;
+ }
+
+ count = mfdcr(DCRN_DMACT0 + (dmanr * 0x8));
+
+ return (count << p_dma_ch->shift);
+}
+
+/*
+ * Sets the DMA address for a memory to peripheral or peripheral
+ * to memory transfer. The address is just saved in the channel
+ * structure for now and used later in enable_dma().
+ */
+void
+ppc4xx_set_dma_addr(unsigned int dmanr, phys_addr_t addr)
+{
+ ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
+
+ if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+ printk("ppc4xx_set_dma_addr: bad channel: %d\n", dmanr);
+ return;
+ }
+
+#ifdef DEBUG_4xxDMA
+ {
+ int error = 0;
+ switch (p_dma_ch->pwidth) {
+ case PW_8:
+ break;
+ case PW_16:
+ if ((unsigned) addr & 0x1)
+ error = 1;
+ break;
+ case PW_32:
+ if ((unsigned) addr & 0x3)
+ error = 1;
+ break;
+ case PW_64:
+ if ((unsigned) addr & 0x7)
+ error = 1;
+ break;
+ default:
+ printk("ppc4xx_set_dma_addr: invalid bus width: 0x%x\n",
+ p_dma_ch->pwidth);
+ return;
+ }
+ if (error)
+ printk("Warning: ppc4xx_set_dma_addr addr 0x%x bus width %d\n",
+ addr, p_dma_ch->pwidth);
+ }
+#endif
+
+ /* save dma address and program it later after we know the xfer mode */
+ p_dma_ch->addr = addr;
+}
+
+/*
+ * Sets both DMA addresses for a memory to memory transfer.
+ * For memory to peripheral or peripheral to memory transfers
+ * the function set_dma_addr() should be used instead.
+ */
+void
+ppc4xx_set_dma_addr2(unsigned int dmanr, phys_addr_t src_dma_addr,
+ phys_addr_t dst_dma_addr)
+{
+ if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+ printk("ppc4xx_set_dma_addr2: bad channel: %d\n", dmanr);
+ return;
+ }
+
+#ifdef DEBUG_4xxDMA
+ {
+ ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
+ int error = 0;
+ switch (p_dma_ch->pwidth) {
+ case PW_8:
+ break;
+ case PW_16:
+ if (((unsigned) src_dma_addr & 0x1) ||
+ ((unsigned) dst_dma_addr & 0x1)
+ )
+ error = 1;
+ break;
+ case PW_32:
+ if (((unsigned) src_dma_addr & 0x3) ||
+ ((unsigned) dst_dma_addr & 0x3)
+ )
+ error = 1;
+ break;
+ case PW_64:
+ if (((unsigned) src_dma_addr & 0x7) ||
+ ((unsigned) dst_dma_addr & 0x7)
+ )
+ error = 1;
+ break;
+ default:
+ printk("ppc4xx_set_dma_addr2: invalid bus width: 0x%x\n",
+ p_dma_ch->pwidth);
+ return;
+ }
+ if (error)
+ printk
+ ("Warning: ppc4xx_set_dma_addr2 src 0x%x dst 0x%x bus width %d\n",
+ src_dma_addr, dst_dma_addr, p_dma_ch->pwidth);
+ }
+#endif
+
+ ppc4xx_set_src_addr(dmanr, src_dma_addr);
+ ppc4xx_set_dst_addr(dmanr, dst_dma_addr);
+}
+
+/*
+ * Enables the channel interrupt.
+ *
+ * If performing a scatter/gatter transfer, this function
+ * MUST be called before calling alloc_dma_handle() and building
+ * the sgl list. Otherwise, interrupts will not be enabled, if
+ * they were previously disabled.
+ */
+int
+ppc4xx_enable_dma_interrupt(unsigned int dmanr)
+{
+ unsigned int control;
+ ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
+
+ if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+ printk("ppc4xx_enable_dma_interrupt: bad channel: %d\n", dmanr);
+ return DMA_STATUS_BAD_CHANNEL;
+ }
+
+ p_dma_ch->int_enable = 1;
+
+ control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
+ control |= DMA_CIE_ENABLE; /* Channel Interrupt Enable */
+ mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
+
+ return DMA_STATUS_GOOD;
+}
+
+/*
+ * Disables the channel interrupt.
+ *
+ * If performing a scatter/gatter transfer, this function
+ * MUST be called before calling alloc_dma_handle() and building
+ * the sgl list. Otherwise, interrupts will not be disabled, if
+ * they were previously enabled.
+ */
+int
+ppc4xx_disable_dma_interrupt(unsigned int dmanr)
+{
+ unsigned int control;
+ ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
+
+ if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+ printk("ppc4xx_disable_dma_interrupt: bad channel: %d\n", dmanr);
+ return DMA_STATUS_BAD_CHANNEL;
+ }
+
+ p_dma_ch->int_enable = 0;
+
+ control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
+ control &= ~DMA_CIE_ENABLE; /* Channel Interrupt Enable */
+ mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
+
+ return DMA_STATUS_GOOD;
+}
+
+/*
+ * Configures a DMA channel, including the peripheral bus width, if a
+ * peripheral is attached to the channel, the polarity of the DMAReq and
+ * DMAAck signals, etc. This information should really be setup by the boot
+ * code, since most likely the configuration won't change dynamically.
+ * If the kernel has to call this function, it's recommended that it's
+ * called from platform specific init code. The driver should not need to
+ * call this function.
+ */
+int
+ppc4xx_init_dma_channel(unsigned int dmanr, ppc_dma_ch_t * p_init)
+{
+ unsigned int polarity;
+ uint32_t control = 0;
+ ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
+
+ DMA_MODE_READ = (unsigned long) DMA_TD; /* Peripheral to Memory */
+ DMA_MODE_WRITE = 0; /* Memory to Peripheral */
+
+ if (!p_init) {
+ printk("ppc4xx_init_dma_channel: NULL p_init\n");
+ return DMA_STATUS_NULL_POINTER;
+ }
+
+ if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+ printk("ppc4xx_init_dma_channel: bad channel %d\n", dmanr);
+ return DMA_STATUS_BAD_CHANNEL;
+ }
+
+#if DCRN_POL > 0
+ polarity = mfdcr(DCRN_POL);
+#else
+ polarity = 0;
+#endif
+
+ /* Setup the control register based on the values passed to
+ * us in p_init. Then, over-write the control register with this
+ * new value.
+ */
+ control |= SET_DMA_CONTROL;
+
+ /* clear all polarity signals and then "or" in new signal levels */
+ polarity &= ~GET_DMA_POLARITY(dmanr);
+ polarity |= p_init->polarity;
+#if DCRN_POL > 0
+ mtdcr(DCRN_POL, polarity);
+#endif
+ mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
+
+ /* save these values in our dma channel structure */
+ memcpy(p_dma_ch, p_init, sizeof (ppc_dma_ch_t));
+
+ /*
+ * The peripheral width values written in the control register are:
+ * PW_8 0
+ * PW_16 1
+ * PW_32 2
+ * PW_64 3
+ *
+ * Since the DMA count register takes the number of "transfers",
+ * we need to divide the count sent to us in certain
+ * functions by the appropriate number. It so happens that our
+ * right shift value is equal to the peripheral width value.
+ */
+ p_dma_ch->shift = p_init->pwidth;
+
+ /*
+ * Save the control word for easy access.
+ */
+ p_dma_ch->control = control;
+
+ mtdcr(DCRN_DMASR, 0xffffffff); /* clear status register */
+ return DMA_STATUS_GOOD;
+}
+
+/*
+ * This function returns the channel configuration.
+ */
+int
+ppc4xx_get_channel_config(unsigned int dmanr, ppc_dma_ch_t * p_dma_ch)
+{
+ unsigned int polarity;
+ unsigned int control;
+
+ if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+ printk("ppc4xx_get_channel_config: bad channel %d\n", dmanr);
+ return DMA_STATUS_BAD_CHANNEL;
+ }
+
+ memcpy(p_dma_ch, &dma_channels[dmanr], sizeof (ppc_dma_ch_t));
+
+#if DCRN_POL > 0
+ polarity = mfdcr(DCRN_POL);
+#else
+ polarity = 0;
+#endif
+
+ p_dma_ch->polarity = polarity & GET_DMA_POLARITY(dmanr);
+ control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
+
+ p_dma_ch->cp = GET_DMA_PRIORITY(control);
+ p_dma_ch->pwidth = GET_DMA_PW(control);
+ p_dma_ch->psc = GET_DMA_PSC(control);
+ p_dma_ch->pwc = GET_DMA_PWC(control);
+ p_dma_ch->phc = GET_DMA_PHC(control);
+ p_dma_ch->ce = GET_DMA_CE_ENABLE(control);
+ p_dma_ch->int_enable = GET_DMA_CIE_ENABLE(control);
+ p_dma_ch->shift = GET_DMA_PW(control);
+
+#ifdef CONFIG_PPC4xx_EDMA
+ p_dma_ch->pf = GET_DMA_PREFETCH(control);
+#else
+ p_dma_ch->ch_enable = GET_DMA_CH(control);
+ p_dma_ch->ece_enable = GET_DMA_ECE(control);
+ p_dma_ch->tcd_disable = GET_DMA_TCD(control);
+#endif
+ return DMA_STATUS_GOOD;
+}
+
+/*
+ * Sets the priority for the DMA channel dmanr.
+ * Since this is setup by the hardware init function, this function
+ * can be used to dynamically change the priority of a channel.
+ *
+ * Acceptable priorities:
+ *
+ * PRIORITY_LOW
+ * PRIORITY_MID_LOW
+ * PRIORITY_MID_HIGH
+ * PRIORITY_HIGH
+ *
+ */
+int
+ppc4xx_set_channel_priority(unsigned int dmanr, unsigned int priority)
+{
+ unsigned int control;
+
+ if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+ printk("ppc4xx_set_channel_priority: bad channel %d\n", dmanr);
+ return DMA_STATUS_BAD_CHANNEL;
+ }
+
+ if ((priority != PRIORITY_LOW) &&
+ (priority != PRIORITY_MID_LOW) &&
+ (priority != PRIORITY_MID_HIGH) && (priority != PRIORITY_HIGH)) {
+ printk("ppc4xx_set_channel_priority: bad priority: 0x%x\n", priority);
+ }
+
+ control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
+ control |= SET_DMA_PRIORITY(priority);
+ mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
+
+ return DMA_STATUS_GOOD;
+}
+
+/*
+ * Returns the width of the peripheral attached to this channel. This assumes
+ * that someone who knows the hardware configuration, boot code or some other
+ * init code, already set the width.
+ *
+ * The return value is one of:
+ * PW_8
+ * PW_16
+ * PW_32
+ * PW_64
+ *
+ * The function returns 0 on error.
+ */
+unsigned int
+ppc4xx_get_peripheral_width(unsigned int dmanr)
+{
+ unsigned int control;
+
+ if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+ printk("ppc4xx_get_peripheral_width: bad channel %d\n", dmanr);
+ return DMA_STATUS_BAD_CHANNEL;
+ }
+
+ control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
+
+ return (GET_DMA_PW(control));
+}
+
+/*
+ * Clears the channel status bits
+ */
+int
+ppc4xx_clr_dma_status(unsigned int dmanr)
+{
+ if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+ printk(KERN_ERR "ppc4xx_clr_dma_status: bad channel: %d\n", dmanr);
+ return DMA_STATUS_BAD_CHANNEL;
+ }
+ mtdcr(DCRN_DMASR, ((u32)DMA_CH0_ERR | (u32)DMA_CS0 | (u32)DMA_TS0) >> dmanr);
+ return DMA_STATUS_GOOD;
+}
+
+/*
+ * Enables the burst on the channel (BTEN bit in the control/count register)
+ * Note:
+ * For scatter/gather dma, this function MUST be called before the
+ * ppc4xx_alloc_dma_handle() func as the chan count register is copied into the
+ * sgl list and used as each sgl element is added.
+ */
+int
+ppc4xx_enable_burst(unsigned int dmanr)
+{
+ unsigned int ctc;
+ if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+ printk(KERN_ERR "ppc4xx_enable_burst: bad channel: %d\n", dmanr);
+ return DMA_STATUS_BAD_CHANNEL;
+ }
+ ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) | DMA_CTC_BTEN;
+ mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
+ return DMA_STATUS_GOOD;
+}
+/*
+ * Disables the burst on the channel (BTEN bit in the control/count register)
+ * Note:
+ * For scatter/gather dma, this function MUST be called before the
+ * ppc4xx_alloc_dma_handle() func as the chan count register is copied into the
+ * sgl list and used as each sgl element is added.
+ */
+int
+ppc4xx_disable_burst(unsigned int dmanr)
+{
+ unsigned int ctc;
+ if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+ printk(KERN_ERR "ppc4xx_disable_burst: bad channel: %d\n", dmanr);
+ return DMA_STATUS_BAD_CHANNEL;
+ }
+ ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) &~ DMA_CTC_BTEN;
+ mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
+ return DMA_STATUS_GOOD;
+}
+/*
+ * Sets the burst size (number of peripheral widths) for the channel
+ * (BSIZ bits in the control/count register))
+ * must be one of:
+ * DMA_CTC_BSIZ_2
+ * DMA_CTC_BSIZ_4
+ * DMA_CTC_BSIZ_8
+ * DMA_CTC_BSIZ_16
+ * Note:
+ * For scatter/gather dma, this function MUST be called before the
+ * ppc4xx_alloc_dma_handle() func as the chan count register is copied into the
+ * sgl list and used as each sgl element is added.
+ */
+int
+ppc4xx_set_burst_size(unsigned int dmanr, unsigned int bsize)
+{
+ unsigned int ctc;
+ if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+ printk(KERN_ERR "ppc4xx_set_burst_size: bad channel: %d\n", dmanr);
+ return DMA_STATUS_BAD_CHANNEL;
+ }
+ ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) &~ DMA_CTC_BSIZ_MSK;
+ ctc |= (bsize & DMA_CTC_BSIZ_MSK);
+ mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
+ return DMA_STATUS_GOOD;
+}
+
+EXPORT_SYMBOL(ppc4xx_init_dma_channel);
+EXPORT_SYMBOL(ppc4xx_get_channel_config);
+EXPORT_SYMBOL(ppc4xx_set_channel_priority);
+EXPORT_SYMBOL(ppc4xx_get_peripheral_width);
+EXPORT_SYMBOL(dma_channels);
+EXPORT_SYMBOL(ppc4xx_set_src_addr);
+EXPORT_SYMBOL(ppc4xx_set_dst_addr);
+EXPORT_SYMBOL(ppc4xx_set_dma_addr);
+EXPORT_SYMBOL(ppc4xx_set_dma_addr2);
+EXPORT_SYMBOL(ppc4xx_enable_dma);
+EXPORT_SYMBOL(ppc4xx_disable_dma);
+EXPORT_SYMBOL(ppc4xx_set_dma_mode);
+EXPORT_SYMBOL(ppc4xx_set_dma_count);
+EXPORT_SYMBOL(ppc4xx_get_dma_residue);
+EXPORT_SYMBOL(ppc4xx_enable_dma_interrupt);
+EXPORT_SYMBOL(ppc4xx_disable_dma_interrupt);
+EXPORT_SYMBOL(ppc4xx_get_dma_status);
+EXPORT_SYMBOL(ppc4xx_clr_dma_status);
+EXPORT_SYMBOL(ppc4xx_enable_burst);
+EXPORT_SYMBOL(ppc4xx_disable_burst);
+EXPORT_SYMBOL(ppc4xx_set_burst_size);