summaryrefslogtreecommitdiffstats
path: root/arch/v850/kernel/sim85e2.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/v850/kernel/sim85e2.c')
-rw-r--r--arch/v850/kernel/sim85e2.c201
1 files changed, 201 insertions, 0 deletions
diff --git a/arch/v850/kernel/sim85e2.c b/arch/v850/kernel/sim85e2.c
new file mode 100644
index 000000000000..93a722b516bb
--- /dev/null
+++ b/arch/v850/kernel/sim85e2.c
@@ -0,0 +1,201 @@
+/*
+ * arch/v850/kernel/sim85e2.c -- Machine-specific stuff for
+ * V850E2 RTL simulator
+ *
+ * Copyright (C) 2002,03 NEC Electronics Corporation
+ * Copyright (C) 2002,03 Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+
+#include <asm/atomic.h>
+#include <asm/page.h>
+#include <asm/machdep.h>
+
+#include "mach.h"
+
+
+/* There are 4 possible areas we can use:
+
+ IRAM (1MB) is fast for instruction fetches, but slow for data
+ DRAM (1020KB) is fast for data, but slow for instructions
+ ERAM is cached, so should be fast for both insns and data
+ SDRAM is external DRAM, similar to ERAM
+*/
+
+#define INIT_MEMC_FOR_SDRAM
+#define USE_SDRAM_AREA
+#define KERNEL_IN_SDRAM_AREA
+
+#define DCACHE_MODE V850E2_CACHE_BTSC_DCM_WT
+/*#define DCACHE_MODE V850E2_CACHE_BTSC_DCM_WB_ALLOC*/
+
+#ifdef USE_SDRAM_AREA
+#define RAM_START SDRAM_ADDR
+#define RAM_END (SDRAM_ADDR + SDRAM_SIZE)
+#else
+/* When we use DRAM, we need to account for the fact that the end of it is
+ used for R0_RAM. */
+#define RAM_START DRAM_ADDR
+#define RAM_END R0_RAM_ADDR
+#endif
+
+
+extern void memcons_setup (void);
+
+
+#ifdef KERNEL_IN_SDRAM_AREA
+#define EARLY_INIT_SECTION_ATTR __attribute__ ((section (".early.text")))
+#else
+#define EARLY_INIT_SECTION_ATTR __init
+#endif
+
+void EARLY_INIT_SECTION_ATTR mach_early_init (void)
+{
+ /* The sim85e2 simulator tracks `undefined' values, so to make
+ debugging easier, we begin by zeroing out all otherwise
+ undefined registers. This is not strictly necessary.
+
+ The registers we zero are:
+ Every GPR except:
+ stack-pointer (r3)
+ task-pointer (r16)
+ our return addr (r31)
+ Every system register (SPR) that we know about except for
+ the PSW (SPR 5), which we zero except for the
+ disable-interrupts bit.
+ */
+
+ /* GPRs */
+ asm volatile (" mov r0, r1 ; mov r0, r2 ");
+ asm volatile ("mov r0, r4 ; mov r0, r5 ; mov r0, r6 ; mov r0, r7 ");
+ asm volatile ("mov r0, r8 ; mov r0, r9 ; mov r0, r10; mov r0, r11");
+ asm volatile ("mov r0, r12; mov r0, r13; mov r0, r14; mov r0, r15");
+ asm volatile (" mov r0, r17; mov r0, r18; mov r0, r19");
+ asm volatile ("mov r0, r20; mov r0, r21; mov r0, r22; mov r0, r23");
+ asm volatile ("mov r0, r24; mov r0, r25; mov r0, r26; mov r0, r27");
+ asm volatile ("mov r0, r28; mov r0, r29; mov r0, r30");
+
+ /* SPRs */
+ asm volatile ("ldsr r0, 0; ldsr r0, 1; ldsr r0, 2; ldsr r0, 3");
+ asm volatile ("ldsr r0, 4");
+ asm volatile ("addi 0x20, r0, r1; ldsr r1, 5"); /* PSW */
+ asm volatile ("ldsr r0, 16; ldsr r0, 17; ldsr r0, 18; ldsr r0, 19");
+ asm volatile ("ldsr r0, 20");
+
+
+#ifdef INIT_MEMC_FOR_SDRAM
+ /* Settings for SDRAM controller. */
+ V850E2_VSWC = 0x0042;
+ V850E2_BSC = 0x9286;
+ V850E2_BCT(0) = 0xb000; /* was: 0 */
+ V850E2_BCT(1) = 0x000b;
+ V850E2_ASC = 0;
+ V850E2_LBS = 0xa9aa; /* was: 0xaaaa */
+ V850E2_LBC(0) = 0;
+ V850E2_LBC(1) = 0; /* was: 0x3 */
+ V850E2_BCC = 0;
+ V850E2_RFS(4) = 0x800a; /* was: 0xf109 */
+ V850E2_SCR(4) = 0x2091; /* was: 0x20a1 */
+ V850E2_RFS(3) = 0x800c;
+ V850E2_SCR(3) = 0x20a1;
+ V850E2_DWC(0) = 0;
+ V850E2_DWC(1) = 0;
+#endif
+
+#if 0
+#ifdef CONFIG_V850E2_SIM85E2S
+ /* Turn on the caches. */
+ V850E2_CACHE_BTSC = V850E2_CACHE_BTSC_ICM | DCACHE_MODE;
+ V850E2_BHC = 0x1010;
+#elif CONFIG_V850E2_SIM85E2C
+ V850E2_CACHE_BTSC |= (V850E2_CACHE_BTSC_ICM | V850E2_CACHE_BTSC_DCM0);
+ V850E2_BUSM_BHC = 0xFFFF;
+#endif
+#else
+ V850E2_BHC = 0;
+#endif
+
+ /* Don't stop the simulator at `halt' instructions. */
+ SIM85E2_NOTHAL = 1;
+
+ /* Ensure that the simulator halts on a panic, instead of going
+ into an infinite loop inside the panic function. */
+ panic_timeout = -1;
+}
+
+void __init mach_setup (char **cmdline)
+{
+ memcons_setup ();
+}
+
+void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
+{
+ *ram_start = RAM_START;
+ *ram_len = RAM_END - RAM_START;
+}
+
+void __init mach_sched_init (struct irqaction *timer_action)
+{
+ /* The simulator actually cycles through all interrupts
+ periodically. We just pay attention to IRQ0, which gives us
+ 1/64 the rate of the periodic interrupts. */
+ setup_irq (0, timer_action);
+}
+
+void mach_gettimeofday (struct timespec *tv)
+{
+ tv->tv_sec = 0;
+ tv->tv_nsec = 0;
+}
+
+/* Interrupts */
+
+struct v850e_intc_irq_init irq_inits[] = {
+ { "IRQ", 0, NUM_MACH_IRQS, 1, 7 },
+ { 0 }
+};
+struct hw_interrupt_type hw_itypes[1];
+
+/* Initialize interrupts. */
+void __init mach_init_irqs (void)
+{
+ v850e_intc_init_irq_types (irq_inits, hw_itypes);
+}
+
+
+void machine_halt (void) __attribute__ ((noreturn));
+void machine_halt (void)
+{
+ SIM85E2_SIMFIN = 0; /* Halt immediately. */
+ for (;;) {}
+}
+
+EXPORT_SYMBOL(machine_halt);
+
+void machine_restart (char *__unused)
+{
+ machine_halt ();
+}
+
+EXPORT_SYMBOL(machine_restart);
+
+void machine_power_off (void)
+{
+ machine_halt ();
+}
+
+EXPORT_SYMBOL(machine_power_off);