summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/blackfin/Kconfig49
-rw-r--r--arch/blackfin/kernel/bfin_gpio.c20
-rw-r--r--arch/blackfin/mach-common/dpmc.S32
-rw-r--r--arch/blackfin/mach-common/ints-priority.c126
-rw-r--r--arch/blackfin/mach-common/pm.c44
5 files changed, 205 insertions, 66 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index ba21e33b8b1f..368bc7fe167e 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -544,7 +544,7 @@ config EXCPT_IRQ_SYSC_L1
default y
help
If enabled, the entire ASM lowlevel exception and interrupt entry code
- (STORE/RESTORE CONTEXT) is linked into L1 instruction memory.
+ (STORE/RESTORE CONTEXT) is linked into L1 instruction memory.
(less latency)
config DO_IRQ_L1
@@ -904,29 +904,38 @@ config ARCH_SUSPEND_POSSIBLE
depends on !SMP
choice
- prompt "Select PM Wakeup Event Source"
- default PM_WAKEUP_GPIO_BY_SIC_IWR
+ prompt "Default Power Saving Mode"
depends on PM
- help
- If you have a GPIO already configured as input with the corresponding PORTx_MASK
- bit set - "Specify Wakeup Event by SIC_IWR value"
+ default PM_BFIN_SLEEP_DEEPER
+config PM_BFIN_SLEEP_DEEPER
+ bool "Sleep Deeper"
+ help
+ Sleep "Deeper" Mode (High Power Savings) - This mode reduces dynamic
+ power dissipation by disabling the clock to the processor core (CCLK).
+ Furthermore, Standby sets the internal power supply voltage (VDDINT)
+ to 0.85 V to provide the greatest power savings, while preserving the
+ processor state.
+ The PLL and system clock (SCLK) continue to operate at a very low
+ frequency of about 3.3 MHz. To preserve data integrity in the SDRAM,
+ the SDRAM is put into Self Refresh Mode. Typically an external event
+ such as GPIO interrupt or RTC activity wakes up the processor.
+ Various Peripherals such as UART, SPORT, PPI may not function as
+ normal during Sleep Deeper, due to the reduced SCLK frequency.
+ When in the sleep mode, system DMA access to L1 memory is not supported.
+
+config PM_BFIN_SLEEP
+ bool "Sleep"
+ help
+ Sleep Mode (High Power Savings) - The sleep mode reduces power
+ dissipation by disabling the clock to the processor core (CCLK).
+ The PLL and system clock (SCLK), however, continue to operate in
+ this mode. Typically an external event or RTC activity will wake
+ up the processor. When in the sleep mode,
+ system DMA access to L1 memory is not supported.
+endchoice
-config PM_WAKEUP_GPIO_BY_SIC_IWR
- bool "Specify Wakeup Event by SIC_IWR value"
config PM_WAKEUP_BY_GPIO
bool "Cause Wakeup Event by GPIO"
-config PM_WAKEUP_GPIO_API
- bool "Configure Wakeup Event by PM GPIO API"
-
-endchoice
-
-config PM_WAKEUP_SIC_IWR
- hex "Wakeup Events (SIC_IWR)"
- depends on PM_WAKEUP_GPIO_BY_SIC_IWR
- default 0x8 if (BF537 || BF536 || BF534)
- default 0x80 if (BF533 || BF532 || BF531)
- default 0x80 if (BF54x)
- default 0x80 if (BF52x)
config PM_WAKEUP_GPIO_NUMBER
int "Wakeup GPIO number"
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index 6bbe0a2fccb8..08788f7bbfba 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -186,7 +186,7 @@ static struct str_ident {
char name[RESOURCE_LABEL_SIZE];
} str_ident[MAX_RESOURCES];
-#ifdef CONFIG_PM
+#if defined(CONFIG_PM) && !defined(CONFIG_BF54x)
static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)];
@@ -696,9 +696,8 @@ static int bfin_gpio_wakeup_type(unsigned gpio, unsigned char type)
return 0;
}
-u32 gpio_pm_setup(void)
+u32 bfin_pm_setup(void)
{
- u32 sic_iwr = 0;
u16 bank, mask, i, gpio;
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
@@ -723,7 +722,8 @@ u32 gpio_pm_setup(void)
gpio = i;
while (mask) {
- if (mask & 1) {
+ if ((mask & 1) && (wakeup_flags_map[gpio] !=
+ PM_WAKE_IGNORE)) {
reserved_gpio_map[gpio_bank(gpio)] |=
gpio_bit(gpio);
bfin_gpio_wakeup_type(gpio,
@@ -734,21 +734,17 @@ u32 gpio_pm_setup(void)
mask >>= 1;
}
- sic_iwr |= 1 <<
- (sic_iwr_irqs[bank] - (IRQ_CORETMR + 1));
+ bfin_internal_set_wake(sic_iwr_irqs[bank], 1);
gpio_bankb[bank]->maskb_set = wakeup_map[gpio_bank(i)];
}
}
AWA_DUMMY_READ(maskb_set);
- if (sic_iwr)
- return sic_iwr;
- else
- return IWR_ENABLE_ALL;
+ return 0;
}
-void gpio_pm_restore(void)
+void bfin_pm_restore(void)
{
u16 bank, mask, i;
@@ -768,7 +764,7 @@ void gpio_pm_restore(void)
reserved_gpio_map[bank] =
gpio_bank_saved[bank].reserved;
-
+ bfin_internal_set_wake(sic_iwr_irqs[bank], 0);
}
gpio_bankb[bank]->maskb = gpio_bank_saved[bank].maskb;
diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc.S
index b82c096e1980..b80ddd8b232d 100644
--- a/arch/blackfin/mach-common/dpmc.S
+++ b/arch/blackfin/mach-common/dpmc.S
@@ -191,6 +191,9 @@ ENTRY(_sleep_mode)
call _test_pll_locked;
R0 = IWR_ENABLE(0);
+ R1 = IWR_DISABLE_ALL;
+ R2 = IWR_DISABLE_ALL;
+
call _set_sic_iwr;
P0.H = hi(PLL_CTL);
@@ -237,6 +240,10 @@ ENTRY(_deep_sleep)
CLI R4;
+ R0 = IWR_ENABLE(0);
+ R1 = IWR_DISABLE_ALL;
+ R2 = IWR_DISABLE_ALL;
+
call _set_sic_iwr;
call _set_dram_srfs;
@@ -261,6 +268,9 @@ ENTRY(_deep_sleep)
call _test_pll_locked;
R0 = IWR_ENABLE(0);
+ R1 = IWR_DISABLE_ALL;
+ R2 = IWR_DISABLE_ALL;
+
call _set_sic_iwr;
P0.H = hi(PLL_CTL);
@@ -286,7 +296,13 @@ ENTRY(_sleep_deeper)
CLI R4;
P3 = R0;
+ P4 = R1;
+ P5 = R2;
+
R0 = IWR_ENABLE(0);
+ R1 = IWR_DISABLE_ALL;
+ R2 = IWR_DISABLE_ALL;
+
call _set_sic_iwr;
call _set_dram_srfs; /* Set SDRAM Self Refresh */
@@ -327,6 +343,8 @@ ENTRY(_sleep_deeper)
call _test_pll_locked;
R0 = P3;
+ R1 = P4;
+ R3 = P5;
call _set_sic_iwr; /* Set Awake from IDLE */
P0.H = hi(PLL_CTL);
@@ -340,6 +358,9 @@ ENTRY(_sleep_deeper)
call _test_pll_locked;
R0 = IWR_ENABLE(0);
+ R1 = IWR_DISABLE_ALL;
+ R2 = IWR_DISABLE_ALL;
+
call _set_sic_iwr; /* Set Awake from IDLE PLL */
P0.H = hi(VR_CTL);
@@ -417,14 +438,23 @@ ENTRY(_unset_dram_srfs)
RTS;
ENTRY(_set_sic_iwr)
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
P0.H = hi(SIC_IWR0);
P0.L = lo(SIC_IWR0);
+ P1.H = hi(SIC_IWR1);
+ P1.L = lo(SIC_IWR1);
+ [P1] = R1;
+#if defined(CONFIG_BF54x)
+ P1.H = hi(SIC_IWR2);
+ P1.L = lo(SIC_IWR2);
+ [P1] = R2;
+#endif
#else
P0.H = hi(SIC_IWR);
P0.L = lo(SIC_IWR);
#endif
[P0] = R0;
+
SSYNC;
RTS;
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 166dbba0c396..81d00183ae91 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -1,5 +1,5 @@
/*
- * File: arch/blackfin/mach-common/ints-priority-sc.c
+ * File: arch/blackfin/mach-common/ints-priority.c
* Based on:
* Author:
*
@@ -13,7 +13,7 @@
* 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
* 2003 Metrowerks/Motorola
* 2003 Bas Vermeulen <bas@buyways.nl>
- * Copyright 2004-2007 Analog Devices Inc.
+ * Copyright 2004-2008 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
@@ -69,6 +69,10 @@ unsigned long irq_flags = 0x1f;
/* The number of spurious interrupts */
atomic_t num_spurious;
+#ifdef CONFIG_PM
+unsigned long bfin_sic_iwr[3]; /* Up to 3 SIC_IWRx registers */
+#endif
+
struct ivgx {
/* irq number for request_irq, available in mach-bf533/irq.h */
unsigned int irqno;
@@ -178,6 +182,27 @@ static void bfin_internal_unmask_irq(unsigned int irq)
SSYNC();
}
+#ifdef CONFIG_PM
+int bfin_internal_set_wake(unsigned int irq, unsigned int state)
+{
+ unsigned bank, bit;
+ unsigned long flags;
+ bank = (irq - (IRQ_CORETMR + 1)) / 32;
+ bit = (irq - (IRQ_CORETMR + 1)) % 32;
+
+ local_irq_save(flags);
+
+ if (state)
+ bfin_sic_iwr[bank] |= (1 << bit);
+ else
+ bfin_sic_iwr[bank] &= ~(1 << bit);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+#endif
+
static struct irq_chip bfin_core_irqchip = {
.ack = ack_noop,
.mask = bfin_core_mask_irq,
@@ -188,6 +213,9 @@ static struct irq_chip bfin_internal_irqchip = {
.ack = ack_noop,
.mask = bfin_internal_mask_irq,
.unmask = bfin_internal_unmask_irq,
+#ifdef CONFIG_PM
+ .set_wake = bfin_internal_set_wake,
+#endif
};
#ifdef BF537_GENERIC_ERROR_INT_DEMUX
@@ -434,6 +462,20 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
return 0;
}
+#ifdef CONFIG_PM
+int bfin_gpio_set_wake(unsigned int irq, unsigned int state)
+{
+ unsigned gpio = irq_to_gpio(irq);
+
+ if (state)
+ gpio_pm_wakeup_request(gpio, PM_WAKE_IGNORE);
+ else
+ gpio_pm_wakeup_free(gpio);
+
+ return 0;
+}
+#endif
+
static struct irq_chip bfin_gpio_irqchip = {
.ack = bfin_gpio_ack_irq,
.mask = bfin_gpio_mask_irq,
@@ -441,7 +483,10 @@ static struct irq_chip bfin_gpio_irqchip = {
.unmask = bfin_gpio_unmask_irq,
.set_type = bfin_gpio_irq_type,
.startup = bfin_gpio_irq_startup,
- .shutdown = bfin_gpio_irq_shutdown
+ .shutdown = bfin_gpio_irq_shutdown,
+#ifdef CONFIG_PM
+ .set_wake = bfin_gpio_set_wake,
+#endif
};
static void bfin_demux_gpio_irq(unsigned int inta_irq,
@@ -487,7 +532,7 @@ static void bfin_demux_gpio_irq(unsigned int inta_irq,
}
if (search) {
- for (i = 0; i < MAX_BLACKFIN_GPIOS; i += 16) {
+ for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
irq += i;
mask = get_gpiop_data(i) &
@@ -763,6 +808,74 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
return 0;
}
+#ifdef CONFIG_PM
+u32 pint_saved_masks[NR_PINT_SYS_IRQS];
+u32 pint_wakeup_masks[NR_PINT_SYS_IRQS];
+
+int bfin_gpio_set_wake(unsigned int irq, unsigned int state)
+{
+ u32 pint_irq;
+ u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
+ u32 bank = PINT_2_BANK(pint_val);
+ u32 pintbit = PINT_BIT(pint_val);
+
+ switch (bank) {
+ case 0:
+ pint_irq = IRQ_PINT0;
+ break;
+ case 2:
+ pint_irq = IRQ_PINT2;
+ break;
+ case 3:
+ pint_irq = IRQ_PINT3;
+ break;
+ case 1:
+ pint_irq = IRQ_PINT1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ bfin_internal_set_wake(pint_irq, state);
+
+ if (state)
+ pint_wakeup_masks[bank] |= pintbit;
+ else
+ pint_wakeup_masks[bank] &= ~pintbit;
+
+ return 0;
+}
+
+u32 bfin_pm_setup(void)
+{
+ u32 val, i;
+
+ for (i = 0; i < NR_PINT_SYS_IRQS; i++) {
+ val = pint[i]->mask_clear;
+ pint_saved_masks[i] = val;
+ if (val ^ pint_wakeup_masks[i]) {
+ pint[i]->mask_clear = val;
+ pint[i]->mask_set = pint_wakeup_masks[i];
+ }
+ }
+
+ return 0;
+}
+
+void bfin_pm_restore(void)
+{
+ u32 i, val;
+
+ for (i = 0; i < NR_PINT_SYS_IRQS; i++) {
+ val = pint_saved_masks[i];
+ if (val ^ pint_wakeup_masks[i]) {
+ pint[i]->mask_clear = pint[i]->mask_clear;
+ pint[i]->mask_set = val;
+ }
+ }
+}
+#endif
+
static struct irq_chip bfin_gpio_irqchip = {
.ack = bfin_gpio_ack_irq,
.mask = bfin_gpio_mask_irq,
@@ -770,7 +883,10 @@ static struct irq_chip bfin_gpio_irqchip = {
.unmask = bfin_gpio_unmask_irq,
.set_type = bfin_gpio_irq_type,
.startup = bfin_gpio_irq_startup,
- .shutdown = bfin_gpio_irq_shutdown
+ .shutdown = bfin_gpio_irq_shutdown,
+#ifdef CONFIG_PM
+ .set_wake = bfin_gpio_set_wake,
+#endif
};
static void bfin_demux_gpio_irq(unsigned int inta_irq,
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index 81930f7d06f1..0be805ca423f 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -4,7 +4,7 @@
* Author: Cliff Brake <cbrake@accelent.com> Copyright (c) 2001
*
* Created: 2001
- * Description: Power management for the bfin
+ * Description: Blackfin power management
*
* Modified: Nicolas Pitre - PXA250 support
* Copyright (c) 2002 Monta Vista Software, Inc.
@@ -12,7 +12,7 @@
* Copyright (c) 2002 Monta Vista Software, Inc.
* Dirk Behme <dirk.behme@de.bosch.com> - OMAP1510/1610
* Copyright 2004
- * Copyright 2004-2006 Analog Devices Inc.
+ * Copyright 2004-2008 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
@@ -67,42 +67,30 @@ void bfin_pm_suspend_standby_enter(void)
gpio_pm_wakeup_request(CONFIG_PM_WAKEUP_GPIO_NUMBER, WAKEUP_TYPE);
#endif
-#if defined(CONFIG_PM_WAKEUP_BY_GPIO) || defined(CONFIG_PM_WAKEUP_GPIO_API)
- {
- u32 flags;
+ u32 flags;
- local_irq_save(flags);
+ local_irq_save(flags);
+ bfin_pm_setup();
- sleep_deeper(gpio_pm_setup()); /*Goto Sleep*/
-
- gpio_pm_restore();
-
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
- bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
- bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
-# ifdef CONFIG_BF54x
- bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
-# endif
+#ifdef CONFIG_PM_BFIN_SLEEP_DEEPER
+ sleep_deeper(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
#else
- bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+ sleep_mode(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
#endif
- local_irq_restore(flags);
- }
-#endif
+ bfin_pm_restore();
-#if defined(CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR)
- sleep_deeper(CONFIG_PM_WAKEUP_SIC_IWR);
-# if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
-# ifdef CONFIG_BF54x
+# ifdef CONFIG_BF54x
bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
-# endif
-# else
- bfin_write_SIC_IWR(IWR_ENABLE_ALL);
# endif
-#endif /* CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR */
+#else
+ bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+#endif
+
+ local_irq_restore(flags);
}
/*