summaryrefslogtreecommitdiffstats
path: root/drivers/ata/libata-sff.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/libata-sff.c')
-rw-r--r--drivers/ata/libata-sff.c416
1 files changed, 288 insertions, 128 deletions
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 19ddf924944f..efa4a18cfb9d 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -63,7 +63,6 @@ const struct ata_port_operations ata_sff_port_ops = {
.sff_tf_read = ata_sff_tf_read,
.sff_exec_command = ata_sff_exec_command,
.sff_data_xfer = ata_sff_data_xfer,
- .sff_irq_clear = ata_sff_irq_clear,
.sff_drain_fifo = ata_sff_drain_fifo,
.lost_interrupt = ata_sff_lost_interrupt,
@@ -395,33 +394,12 @@ void ata_sff_irq_on(struct ata_port *ap)
ata_sff_set_devctl(ap, ap->ctl);
ata_wait_idle(ap);
- ap->ops->sff_irq_clear(ap);
+ if (ap->ops->sff_irq_clear)
+ ap->ops->sff_irq_clear(ap);
}
EXPORT_SYMBOL_GPL(ata_sff_irq_on);
/**
- * ata_sff_irq_clear - Clear PCI IDE BMDMA interrupt.
- * @ap: Port associated with this ATA transaction.
- *
- * Clear interrupt and error flags in DMA status register.
- *
- * May be used as the irq_clear() entry in ata_port_operations.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-void ata_sff_irq_clear(struct ata_port *ap)
-{
- void __iomem *mmio = ap->ioaddr.bmdma_addr;
-
- if (!mmio)
- return;
-
- iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS);
-}
-EXPORT_SYMBOL_GPL(ata_sff_irq_clear);
-
-/**
* ata_sff_tf_load - send taskfile registers to host controller
* @ap: Port to which output is sent
* @tf: ATA taskfile register set
@@ -820,11 +798,15 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc)
case ATAPI_PROT_NODATA:
ap->hsm_task_state = HSM_ST_LAST;
break;
+#ifdef CONFIG_ATA_BMDMA
case ATAPI_PROT_DMA:
ap->hsm_task_state = HSM_ST_LAST;
/* initiate bmdma */
ap->ops->bmdma_start(qc);
break;
+#endif /* CONFIG_ATA_BMDMA */
+ default:
+ BUG();
}
}
@@ -1491,27 +1473,27 @@ bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc)
}
EXPORT_SYMBOL_GPL(ata_sff_qc_fill_rtf);
-/**
- * ata_sff_host_intr - Handle host interrupt for given (port, task)
- * @ap: Port on which interrupt arrived (possibly...)
- * @qc: Taskfile currently active in engine
- *
- * Handle host interrupt for given queued command. Currently,
- * only DMA interrupts are handled. All other commands are
- * handled via polling with interrupts disabled (nIEN bit).
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- *
- * RETURNS:
- * One if interrupt was handled, zero if not (shared irq).
- */
-unsigned int ata_sff_host_intr(struct ata_port *ap,
- struct ata_queued_cmd *qc)
+static unsigned int ata_sff_idle_irq(struct ata_port *ap)
{
- struct ata_eh_info *ehi = &ap->link.eh_info;
- u8 status, host_stat = 0;
- bool bmdma_stopped = false;
+ ap->stats.idle_irq++;
+
+#ifdef ATA_IRQ_TRAP
+ if ((ap->stats.idle_irq % 1000) == 0) {
+ ap->ops->sff_check_status(ap);
+ if (ap->ops->sff_irq_clear)
+ ap->ops->sff_irq_clear(ap);
+ ata_port_printk(ap, KERN_WARNING, "irq trap\n");
+ return 1;
+ }
+#endif
+ return 0; /* irq not handled */
+}
+
+static unsigned int __ata_sff_port_intr(struct ata_port *ap,
+ struct ata_queued_cmd *qc,
+ bool hsmv_on_idle)
+{
+ u8 status;
VPRINTK("ata%u: protocol %d task_state %d\n",
ap->print_id, qc->tf.protocol, ap->hsm_task_state);
@@ -1528,90 +1510,56 @@ unsigned int ata_sff_host_intr(struct ata_port *ap,
* need to check ata_is_atapi(qc->tf.protocol) again.
*/
if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
- goto idle_irq;
- break;
- case HSM_ST_LAST:
- if (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATAPI_PROT_DMA) {
- /* check status of DMA engine */
- host_stat = ap->ops->bmdma_status(ap);
- VPRINTK("ata%u: host_stat 0x%X\n",
- ap->print_id, host_stat);
-
- /* if it's not our irq... */
- if (!(host_stat & ATA_DMA_INTR))
- goto idle_irq;
-
- /* before we do anything else, clear DMA-Start bit */
- ap->ops->bmdma_stop(qc);
- bmdma_stopped = true;
-
- if (unlikely(host_stat & ATA_DMA_ERR)) {
- /* error when transfering data to/from memory */
- qc->err_mask |= AC_ERR_HOST_BUS;
- ap->hsm_task_state = HSM_ST_ERR;
- }
- }
+ return ata_sff_idle_irq(ap);
break;
case HSM_ST:
+ case HSM_ST_LAST:
break;
default:
- goto idle_irq;
+ return ata_sff_idle_irq(ap);
}
-
/* check main status, clearing INTRQ if needed */
status = ata_sff_irq_status(ap);
if (status & ATA_BUSY) {
- if (bmdma_stopped) {
+ if (hsmv_on_idle) {
/* BMDMA engine is already stopped, we're screwed */
qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
} else
- goto idle_irq;
+ return ata_sff_idle_irq(ap);
}
/* clear irq events */
- ap->ops->sff_irq_clear(ap);
+ if (ap->ops->sff_irq_clear)
+ ap->ops->sff_irq_clear(ap);
ata_sff_hsm_move(ap, qc, status, 0);
- if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATAPI_PROT_DMA))
- ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
-
return 1; /* irq handled */
-
-idle_irq:
- ap->stats.idle_irq++;
-
-#ifdef ATA_IRQ_TRAP
- if ((ap->stats.idle_irq % 1000) == 0) {
- ap->ops->sff_check_status(ap);
- ap->ops->sff_irq_clear(ap);
- ata_port_printk(ap, KERN_WARNING, "irq trap\n");
- return 1;
- }
-#endif
- return 0; /* irq not handled */
}
-EXPORT_SYMBOL_GPL(ata_sff_host_intr);
/**
- * ata_sff_interrupt - Default ATA host interrupt handler
- * @irq: irq line (unused)
- * @dev_instance: pointer to our ata_host information structure
+ * ata_sff_port_intr - Handle SFF port interrupt
+ * @ap: Port on which interrupt arrived (possibly...)
+ * @qc: Taskfile currently active in engine
*
- * Default interrupt handler for PCI IDE devices. Calls
- * ata_sff_host_intr() for each port that is not disabled.
+ * Handle port interrupt for given queued command.
*
* LOCKING:
- * Obtains host lock during operation.
+ * spin_lock_irqsave(host lock)
*
* RETURNS:
- * IRQ_NONE or IRQ_HANDLED.
+ * One if interrupt was handled, zero if not (shared irq).
*/
-irqreturn_t ata_sff_interrupt(int irq, void *dev_instance)
+unsigned int ata_sff_port_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
+{
+ return __ata_sff_port_intr(ap, qc, false);
+}
+EXPORT_SYMBOL_GPL(ata_sff_port_intr);
+
+static inline irqreturn_t __ata_sff_interrupt(int irq, void *dev_instance,
+ unsigned int (*port_intr)(struct ata_port *, struct ata_queued_cmd *))
{
struct ata_host *host = dev_instance;
bool retried = false;
@@ -1631,7 +1579,7 @@ retry:
qc = ata_qc_from_tag(ap, ap->link.active_tag);
if (qc) {
if (!(qc->tf.flags & ATA_TFLAG_POLLING))
- handled |= ata_sff_host_intr(ap, qc);
+ handled |= port_intr(ap, qc);
else
polling |= 1 << i;
} else
@@ -1658,7 +1606,8 @@ retry:
if (idle & (1 << i)) {
ap->ops->sff_check_status(ap);
- ap->ops->sff_irq_clear(ap);
+ if (ap->ops->sff_irq_clear)
+ ap->ops->sff_irq_clear(ap);
} else {
/* clear INTRQ and check if BUSY cleared */
if (!(ap->ops->sff_check_status(ap) & ATA_BUSY))
@@ -1680,6 +1629,25 @@ retry:
return IRQ_RETVAL(handled);
}
+
+/**
+ * ata_sff_interrupt - Default SFF ATA host interrupt handler
+ * @irq: irq line (unused)
+ * @dev_instance: pointer to our ata_host information structure
+ *
+ * Default interrupt handler for PCI IDE devices. Calls
+ * ata_sff_port_intr() for each port that is not disabled.
+ *
+ * LOCKING:
+ * Obtains host lock during operation.
+ *
+ * RETURNS:
+ * IRQ_NONE or IRQ_HANDLED.
+ */
+irqreturn_t ata_sff_interrupt(int irq, void *dev_instance)
+{
+ return __ata_sff_interrupt(irq, dev_instance, ata_sff_port_intr);
+}
EXPORT_SYMBOL_GPL(ata_sff_interrupt);
/**
@@ -1717,7 +1685,7 @@ void ata_sff_lost_interrupt(struct ata_port *ap)
status);
/* Run the host interrupt logic as if the interrupt had not been
lost */
- ata_sff_host_intr(ap, qc);
+ ata_sff_port_intr(ap, qc);
}
EXPORT_SYMBOL_GPL(ata_sff_lost_interrupt);
@@ -1744,7 +1712,8 @@ void ata_sff_freeze(struct ata_port *ap)
*/
ap->ops->sff_check_status(ap);
- ap->ops->sff_irq_clear(ap);
+ if (ap->ops->sff_irq_clear)
+ ap->ops->sff_irq_clear(ap);
}
EXPORT_SYMBOL_GPL(ata_sff_freeze);
@@ -1761,7 +1730,8 @@ void ata_sff_thaw(struct ata_port *ap)
{
/* clear & re-enable interrupts */
ap->ops->sff_check_status(ap);
- ap->ops->sff_irq_clear(ap);
+ if (ap->ops->sff_irq_clear)
+ ap->ops->sff_irq_clear(ap);
ata_sff_irq_on(ap);
}
EXPORT_SYMBOL_GPL(ata_sff_thaw);
@@ -2349,13 +2319,13 @@ int ata_pci_sff_init_host(struct ata_host *host)
EXPORT_SYMBOL_GPL(ata_pci_sff_init_host);
/**
- * ata_pci_sff_prepare_host - helper to prepare native PCI ATA host
+ * ata_pci_sff_prepare_host - helper to prepare PCI PIO-only SFF ATA host
* @pdev: target PCI device
* @ppi: array of port_info, must be enough for two ports
* @r_host: out argument for the initialized ATA host
*
- * Helper to allocate ATA host for @pdev, acquire all native PCI
- * resources and initialize it accordingly in one go.
+ * Helper to allocate PIO-only SFF ATA host for @pdev, acquire
+ * all PCI resources and initialize it accordingly in one go.
*
* LOCKING:
* Inherited from calling layer (may sleep).
@@ -2385,9 +2355,6 @@ int ata_pci_sff_prepare_host(struct pci_dev *pdev,
if (rc)
goto err_out;
- /* init DMA related stuff */
- ata_pci_bmdma_init(host);
-
devres_remove_group(&pdev->dev, NULL);
*r_host = host;
return 0;
@@ -2492,8 +2459,21 @@ out:
}
EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host);
+static const struct ata_port_info *ata_sff_find_valid_pi(
+ const struct ata_port_info * const *ppi)
+{
+ int i;
+
+ /* look up the first valid port_info */
+ for (i = 0; i < 2 && ppi[i]; i++)
+ if (ppi[i]->port_ops != &ata_dummy_port_ops)
+ return ppi[i];
+
+ return NULL;
+}
+
/**
- * ata_pci_sff_init_one - Initialize/register PCI IDE host controller
+ * ata_pci_sff_init_one - Initialize/register PIO-only PCI IDE controller
* @pdev: Controller to be initialized
* @ppi: array of port_info, must be enough for two ports
* @sht: scsi_host_template to use when registering the host
@@ -2502,11 +2482,7 @@ EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host);
*
* This is a helper function which can be called from a driver's
* xxx_init_one() probe function if the hardware uses traditional
- * IDE taskfile registers.
- *
- * This function calls pci_enable_device(), reserves its register
- * regions, sets the dma mask, enables bus master mode, and calls
- * ata_device_add()
+ * IDE taskfile registers and is PIO only.
*
* ASSUMPTION:
* Nobody makes a single channel controller that appears solely as
@@ -2523,20 +2499,13 @@ int ata_pci_sff_init_one(struct pci_dev *pdev,
struct scsi_host_template *sht, void *host_priv, int hflag)
{
struct device *dev = &pdev->dev;
- const struct ata_port_info *pi = NULL;
+ const struct ata_port_info *pi;
struct ata_host *host = NULL;
- int i, rc;
+ int rc;
DPRINTK("ENTER\n");
- /* look up the first valid port_info */
- for (i = 0; i < 2 && ppi[i]; i++) {
- if (ppi[i]->port_ops != &ata_dummy_port_ops) {
- pi = ppi[i];
- break;
- }
- }
-
+ pi = ata_sff_find_valid_pi(ppi);
if (!pi) {
dev_printk(KERN_ERR, &pdev->dev,
"no valid port_info specified\n");
@@ -2557,7 +2526,6 @@ int ata_pci_sff_init_one(struct pci_dev *pdev,
host->private_data = host_priv;
host->flags |= hflag;
- pci_set_master(pdev);
rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht);
out:
if (rc == 0)
@@ -2571,6 +2539,12 @@ EXPORT_SYMBOL_GPL(ata_pci_sff_init_one);
#endif /* CONFIG_PCI */
+/*
+ * BMDMA support
+ */
+
+#ifdef CONFIG_ATA_BMDMA
+
const struct ata_port_operations ata_bmdma_port_ops = {
.inherits = &ata_sff_port_ops,
@@ -2580,6 +2554,7 @@ const struct ata_port_operations ata_bmdma_port_ops = {
.qc_prep = ata_bmdma_qc_prep,
.qc_issue = ata_bmdma_qc_issue,
+ .sff_irq_clear = ata_bmdma_irq_clear,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
@@ -2804,6 +2779,75 @@ unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc)
EXPORT_SYMBOL_GPL(ata_bmdma_qc_issue);
/**
+ * ata_bmdma_port_intr - Handle BMDMA port interrupt
+ * @ap: Port on which interrupt arrived (possibly...)
+ * @qc: Taskfile currently active in engine
+ *
+ * Handle port interrupt for given queued command.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * One if interrupt was handled, zero if not (shared irq).
+ */
+unsigned int ata_bmdma_port_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
+{
+ struct ata_eh_info *ehi = &ap->link.eh_info;
+ u8 host_stat = 0;
+ bool bmdma_stopped = false;
+ unsigned int handled;
+
+ if (ap->hsm_task_state == HSM_ST_LAST && ata_is_dma(qc->tf.protocol)) {
+ /* check status of DMA engine */
+ host_stat = ap->ops->bmdma_status(ap);
+ VPRINTK("ata%u: host_stat 0x%X\n", ap->print_id, host_stat);
+
+ /* if it's not our irq... */
+ if (!(host_stat & ATA_DMA_INTR))
+ return ata_sff_idle_irq(ap);
+
+ /* before we do anything else, clear DMA-Start bit */
+ ap->ops->bmdma_stop(qc);
+ bmdma_stopped = true;
+
+ if (unlikely(host_stat & ATA_DMA_ERR)) {
+ /* error when transfering data to/from memory */
+ qc->err_mask |= AC_ERR_HOST_BUS;
+ ap->hsm_task_state = HSM_ST_ERR;
+ }
+ }
+
+ handled = __ata_sff_port_intr(ap, qc, bmdma_stopped);
+
+ if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol))
+ ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
+
+ return handled;
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_port_intr);
+
+/**
+ * ata_bmdma_interrupt - Default BMDMA ATA host interrupt handler
+ * @irq: irq line (unused)
+ * @dev_instance: pointer to our ata_host information structure
+ *
+ * Default interrupt handler for PCI IDE devices. Calls
+ * ata_bmdma_port_intr() for each port that is not disabled.
+ *
+ * LOCKING:
+ * Obtains host lock during operation.
+ *
+ * RETURNS:
+ * IRQ_NONE or IRQ_HANDLED.
+ */
+irqreturn_t ata_bmdma_interrupt(int irq, void *dev_instance)
+{
+ return __ata_sff_interrupt(irq, dev_instance, ata_bmdma_port_intr);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_interrupt);
+
+/**
* ata_bmdma_error_handler - Stock error handler for BMDMA controller
* @ap: port to handle error for
*
@@ -2848,7 +2892,8 @@ void ata_bmdma_error_handler(struct ata_port *ap)
/* if we're gonna thaw, make sure IRQ is clear */
if (thaw) {
ap->ops->sff_check_status(ap);
- ap->ops->sff_irq_clear(ap);
+ if (ap->ops->sff_irq_clear)
+ ap->ops->sff_irq_clear(ap);
}
}
@@ -2882,6 +2927,28 @@ void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc)
EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd);
/**
+ * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ * @ap: Port associated with this ATA transaction.
+ *
+ * Clear interrupt and error flags in DMA status register.
+ *
+ * May be used as the irq_clear() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_irq_clear(struct ata_port *ap)
+{
+ void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+ if (!mmio)
+ return;
+
+ iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
+
+/**
* ata_bmdma_setup - Set up PCI IDE BMDMA transaction
* @qc: Info associated with this ATA transaction.
*
@@ -3137,7 +3204,100 @@ void ata_pci_bmdma_init(struct ata_host *host)
}
EXPORT_SYMBOL_GPL(ata_pci_bmdma_init);
+/**
+ * ata_pci_bmdma_prepare_host - helper to prepare PCI BMDMA ATA host
+ * @pdev: target PCI device
+ * @ppi: array of port_info, must be enough for two ports
+ * @r_host: out argument for the initialized ATA host
+ *
+ * Helper to allocate BMDMA ATA host for @pdev, acquire all PCI
+ * resources and initialize it accordingly in one go.
+ *
+ * LOCKING:
+ * Inherited from calling layer (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int ata_pci_bmdma_prepare_host(struct pci_dev *pdev,
+ const struct ata_port_info * const * ppi,
+ struct ata_host **r_host)
+{
+ int rc;
+
+ rc = ata_pci_sff_prepare_host(pdev, ppi, r_host);
+ if (rc)
+ return rc;
+
+ ata_pci_bmdma_init(*r_host);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_prepare_host);
+
+/**
+ * ata_pci_bmdma_init_one - Initialize/register BMDMA PCI IDE controller
+ * @pdev: Controller to be initialized
+ * @ppi: array of port_info, must be enough for two ports
+ * @sht: scsi_host_template to use when registering the host
+ * @host_priv: host private_data
+ * @hflags: host flags
+ *
+ * This function is similar to ata_pci_sff_init_one() but also
+ * takes care of BMDMA initialization.
+ *
+ * LOCKING:
+ * Inherited from PCI layer (may sleep).
+ *
+ * RETURNS:
+ * Zero on success, negative on errno-based value on error.
+ */
+int ata_pci_bmdma_init_one(struct pci_dev *pdev,
+ const struct ata_port_info * const * ppi,
+ struct scsi_host_template *sht, void *host_priv,
+ int hflags)
+{
+ struct device *dev = &pdev->dev;
+ const struct ata_port_info *pi;
+ struct ata_host *host = NULL;
+ int rc;
+
+ DPRINTK("ENTER\n");
+
+ pi = ata_sff_find_valid_pi(ppi);
+ if (!pi) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "no valid port_info specified\n");
+ return -EINVAL;
+ }
+
+ if (!devres_open_group(dev, NULL, GFP_KERNEL))
+ return -ENOMEM;
+
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ goto out;
+
+ /* prepare and activate BMDMA host */
+ rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
+ if (rc)
+ goto out;
+ host->private_data = host_priv;
+ host->flags |= hflags;
+
+ pci_set_master(pdev);
+ rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht);
+ out:
+ if (rc == 0)
+ devres_remove_group(&pdev->dev, NULL);
+ else
+ devres_release_group(&pdev->dev, NULL);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_init_one);
+
#endif /* CONFIG_PCI */
+#endif /* CONFIG_ATA_BMDMA */
/**
* ata_sff_port_init - Initialize SFF/BMDMA ATA port