summaryrefslogtreecommitdiffstats
path: root/drivers/cdrom/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/cdrom/Kconfig')
-rw-r--r--drivers/cdrom/Kconfig213
1 files changed, 213 insertions, 0 deletions
diff --git a/drivers/cdrom/Kconfig b/drivers/cdrom/Kconfig
new file mode 100644
index 000000000000..ff5652d40619
--- /dev/null
+++ b/drivers/cdrom/Kconfig
@@ -0,0 +1,213 @@
+#
+# CDROM driver configuration
+#
+
+menu "Old CD-ROM drivers (not SCSI, not IDE)"
+ depends on ISA
+
+config CD_NO_IDESCSI
+ bool "Support non-SCSI/IDE/ATAPI CDROM drives"
+ ---help---
+ If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
+ here, otherwise N. Read the CD-ROM-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about these CD-ROM drives. If you are unsure what you
+ have, say Y and find out whether you have one of the following
+ drives.
+
+ For each of these drivers, a <file:Documentation/cdrom/{driver_name}>
+ exists. Especially in cases where you do not know exactly which kind
+ of drive you have you should read there. Most of these drivers use a
+ file drivers/cdrom/{driver_name}.h where you can define your
+ interface parameters and switch some internal goodies.
+
+ To compile these CD-ROM drivers as a module, choose M instead of Y.
+
+ If you want to use any of these CD-ROM drivers, you also have to
+ answer Y or M to "ISO 9660 CD-ROM file system support" below (this
+ answer will get "defaulted" for you if you enable any of the Linux
+ CD-ROM drivers).
+
+config AZTCD
+ tristate "Aztech/Orchid/Okano/Wearnes/TXC/CyDROM CDROM support"
+ depends on CD_NO_IDESCSI
+ ---help---
+ This is your driver if you have an Aztech CDA268-01A, Orchid
+ CD-3110, Okano or Wearnes CDD110, Conrad TXC, or CyCD-ROM CR520 or
+ CR540 CD-ROM drive. This driver -- just like all these CD-ROM
+ drivers -- is NOT for CD-ROM drives with IDE/ATAPI interfaces, such
+ as Aztech CDA269-031SE. Please read the file
+ <file:Documentation/cdrom/aztcd>.
+
+ If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+ file system support" below, because that's the file system used on
+ CD-ROMs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called aztcd.
+
+config GSCD
+ tristate "Goldstar R420 CDROM support"
+ depends on CD_NO_IDESCSI
+ ---help---
+ If this is your CD-ROM drive, say Y here. As described in the file
+ <file:Documentation/cdrom/gscd>, you might have to change a setting
+ in the file <file:drivers/cdrom/gscd.h> before compiling the
+ kernel. Please read the file <file:Documentation/cdrom/gscd>.
+
+ If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+ file system support" below, because that's the file system used on
+ CD-ROMs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gscd.
+
+config SBPCD
+ tristate "Matsushita/Panasonic/Creative, Longshine, TEAC CDROM support"
+ depends on CD_NO_IDESCSI && BROKEN_ON_SMP
+ ---help---
+ This driver supports most of the drives which use the Panasonic or
+ Sound Blaster interface. Please read the file
+ <file:Documentation/cdrom/sbpcd>.
+
+ The Matsushita CR-521, CR-522, CR-523, CR-562, CR-563 drives
+ (sometimes labeled "Creative"), the Creative Labs CD200, the
+ Longshine LCS-7260, the "IBM External ISA CD-ROM" (in fact a CR-56x
+ model), the TEAC CD-55A fall under this category. Some other
+ "electrically compatible" drives (Vertos, Genoa, some Funai models)
+ are currently not supported; for the Sanyo H94A drive currently a
+ separate driver (asked later) is responsible. Most drives have a
+ uniquely shaped faceplate, with a caddyless motorized drawer, but
+ without external brand markings. The older CR-52x drives have a
+ caddy and manual loading/eject, but still no external markings. The
+ driver is able to do an extended auto-probing for interface
+ addresses and drive types; this can help to find facts in cases you
+ are not sure, but can consume some time during the boot process if
+ none of the supported drives gets found. Once your drive got found,
+ you should enter the reported parameters into
+ <file:drivers/cdrom/sbpcd.h> and set "DISTRIBUTION 0" there.
+
+ This driver can support up to four CD-ROM controller cards, and each
+ card can support up to four CD-ROM drives; if you say Y here, you
+ will be asked how many controller cards you have. If compiled as a
+ module, only one controller card (but with up to four drives) is
+ usable.
+
+ If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+ file system support" below, because that's the file system used on
+ CD-ROMs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sbpcd.
+
+config MCDX
+ tristate "Mitsumi CDROM support"
+ depends on CD_NO_IDESCSI
+ ---help---
+ Use this driver if you want to be able to use your Mitsumi LU-005,
+ FX-001 or FX-001D CD-ROM drive.
+
+ Please read the file <file:Documentation/cdrom/mcdx>.
+
+ If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+ file system support" below, because that's the file system used on
+ CD-ROMs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mcdx.
+
+config OPTCD
+ tristate "Optics Storage DOLPHIN 8000AT CDROM support"
+ depends on CD_NO_IDESCSI
+ ---help---
+ This is the driver for the 'DOLPHIN' drive with a 34-pin Sony
+ compatible interface. It also works with the Lasermate CR328A. If
+ you have one of those, say Y. This driver does not work for the
+ Optics Storage 8001 drive; use the IDE-ATAPI CD-ROM driver for that
+ one. Please read the file <file:Documentation/cdrom/optcd>.
+
+ If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+ file system support" below, because that's the file system used on
+ CD-ROMs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called optcd.
+
+config CM206
+ tristate "Philips/LMS CM206 CDROM support"
+ depends on CD_NO_IDESCSI && BROKEN_ON_SMP
+ ---help---
+ If you have a Philips/LMS CD-ROM drive cm206 in combination with a
+ cm260 host adapter card, say Y here. Please also read the file
+ <file:Documentation/cdrom/cm206>.
+
+ If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+ file system support" below, because that's the file system used on
+ CD-ROMs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cm206.
+
+config SJCD
+ tristate "Sanyo CDR-H94A CDROM support"
+ depends on CD_NO_IDESCSI
+ help
+ If this is your CD-ROM drive, say Y here and read the file
+ <file:Documentation/cdrom/sjcd>. You should then also say Y or M to
+ "ISO 9660 CD-ROM file system support" below, because that's the
+ file system used on CD-ROMs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sjcd.
+
+config ISP16_CDI
+ tristate "ISP16/MAD16/Mozart soft configurable cdrom interface support"
+ depends on CD_NO_IDESCSI
+ ---help---
+ These are sound cards with built-in cdrom interfaces using the OPTi
+ 82C928 or 82C929 chips. Say Y here to have them detected and
+ possibly configured at boot time. In addition, You'll have to say Y
+ to a driver for the particular cdrom drive you have attached to the
+ card. Read <file:Documentation/cdrom/isp16> for details.
+
+ To compile this driver as a module, choose M here: the
+ module will be called isp16.
+
+config CDU31A
+ tristate "Sony CDU31A/CDU33A CDROM support"
+ depends on CD_NO_IDESCSI && BROKEN_ON_SMP
+ ---help---
+ These CD-ROM drives have a spring-pop-out caddyless drawer, and a
+ rectangular green LED centered beneath it. NOTE: these CD-ROM
+ drives will not be auto detected by the kernel at boot time; you
+ have to provide the interface address as an option to the kernel at
+ boot time as described in <file:Documentation/cdrom/cdu31a> or fill
+ in your parameters into <file:drivers/cdrom/cdu31a.c>. Try "man
+ bootparam" or see the documentation of your boot loader (lilo or
+ loadlin) about how to pass options to the kernel.
+
+ If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+ file system support" below, because that's the file system used on
+ CD-ROMs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cdu31a.
+
+config CDU535
+ tristate "Sony CDU535 CDROM support"
+ depends on CD_NO_IDESCSI
+ ---help---
+ This is the driver for the older Sony CDU-535 and CDU-531 CD-ROM
+ drives. Please read the file <file:Documentation/cdrom/sonycd535>.
+
+ If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+ file system support" below, because that's the file system used on
+ CD-ROMs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sonycd535.
+
+endmenu