summaryrefslogtreecommitdiffstats
path: root/drivers/dma/ipu/ipu_idmac.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/dma/ipu/ipu_idmac.c')
-rw-r--r--drivers/dma/ipu/ipu_idmac.c50
1 files changed, 0 insertions, 50 deletions
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index cb26ee9773d6..c1a125e7d1df 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -1145,29 +1145,6 @@ static int ipu_disable_channel(struct idmac *idmac, struct idmac_channel *ichan,
reg = idmac_read_icreg(ipu, IDMAC_CHA_EN);
idmac_write_icreg(ipu, reg & ~chan_mask, IDMAC_CHA_EN);
- /*
- * Problem (observed with channel DMAIC_7): after enabling the channel
- * and initialising buffers, there comes an interrupt with current still
- * pointing at buffer 0, whereas it should use buffer 0 first and only
- * generate an interrupt when it is done, then current should already
- * point to buffer 1. This spurious interrupt also comes on channel
- * DMASDC_0. With DMAIC_7 normally, is we just leave the ISR after the
- * first interrupt, there comes the second with current correctly
- * pointing to buffer 1 this time. But sometimes this second interrupt
- * doesn't come and the channel hangs. Clearing BUFx_RDY when disabling
- * the channel seems to prevent the channel from hanging, but it doesn't
- * prevent the spurious interrupt. This might also be unsafe. Think
- * about the IDMAC controller trying to switch to a buffer, when we
- * clear the ready bit, and re-enable it a moment later.
- */
- reg = idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY);
- idmac_write_ipureg(ipu, 0, IPU_CHA_BUF0_RDY);
- idmac_write_ipureg(ipu, reg & ~(1UL << channel), IPU_CHA_BUF0_RDY);
-
- reg = idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY);
- idmac_write_ipureg(ipu, 0, IPU_CHA_BUF1_RDY);
- idmac_write_ipureg(ipu, reg & ~(1UL << channel), IPU_CHA_BUF1_RDY);
-
spin_unlock_irqrestore(&ipu->lock, flags);
return 0;
@@ -1246,33 +1223,6 @@ static irqreturn_t idmac_interrupt(int irq, void *dev_id)
/* Other interrupts do not interfere with this channel */
spin_lock(&ichan->lock);
- if (unlikely(chan_id != IDMAC_SDC_0 && chan_id != IDMAC_SDC_1 &&
- ((curbuf >> chan_id) & 1) == ichan->active_buffer &&
- !list_is_last(ichan->queue.next, &ichan->queue))) {
- int i = 100;
-
- /* This doesn't help. See comment in ipu_disable_channel() */
- while (--i) {
- curbuf = idmac_read_ipureg(&ipu_data, IPU_CHA_CUR_BUF);
- if (((curbuf >> chan_id) & 1) != ichan->active_buffer)
- break;
- cpu_relax();
- }
-
- if (!i) {
- spin_unlock(&ichan->lock);
- dev_dbg(dev,
- "IRQ on active buffer on channel %x, active "
- "%d, ready %x, %x, current %x!\n", chan_id,
- ichan->active_buffer, ready0, ready1, curbuf);
- return IRQ_NONE;
- } else
- dev_dbg(dev,
- "Buffer deactivated on channel %x, active "
- "%d, ready %x, %x, current %x, rest %d!\n", chan_id,
- ichan->active_buffer, ready0, ready1, curbuf, i);
- }
-
if (unlikely((ichan->active_buffer && (ready1 >> chan_id) & 1) ||
(!ichan->active_buffer && (ready0 >> chan_id) & 1)
)) {