1 files changed, 87 insertions, 105 deletions

diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index 227feca7cf8d..ea373283c93b 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -38,7 +38,7 @@
 #define CH7xxx_ADDR	0x76
 #define TFP410_ADDR	0x38
 
-static struct intel_dvo_device intel_dvo_devices[] = {
+static const struct intel_dvo_device intel_dvo_devices[] = {
 	{
 		.type = INTEL_DVO_CHIP_TMDS,
 		.name = "sil164",
@@ -72,25 +72,44 @@ static struct intel_dvo_device intel_dvo_devices[] = {
 		.name = "ch7017",
 		.dvo_reg = DVOC,
 		.slave_addr = 0x75,
-		.gpio = GPIOE,
+		.gpio = GMBUS_PORT_DPB,
 		.dev_ops = &ch7017_ops,
 	}
 };
 
+struct intel_dvo {
+	struct intel_encoder base;
+
+	struct intel_dvo_device dev;
+
+	struct drm_display_mode *panel_fixed_mode;
+	bool panel_wants_dither;
+};
+
+static struct intel_dvo *enc_to_intel_dvo(struct drm_encoder *encoder)
+{
+	return container_of(encoder, struct intel_dvo, base.base);
+}
+
+static struct intel_dvo *intel_attached_dvo(struct drm_connector *connector)
+{
+	return container_of(intel_attached_encoder(connector),
+			    struct intel_dvo, base);
+}
+
 static void intel_dvo_dpms(struct drm_encoder *encoder, int mode)
 {
 	struct drm_i915_private *dev_priv = encoder->dev->dev_private;
-	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
-	struct intel_dvo_device *dvo = intel_encoder->dev_priv;
-	u32 dvo_reg = dvo->dvo_reg;
+	struct intel_dvo *intel_dvo = enc_to_intel_dvo(encoder);
+	u32 dvo_reg = intel_dvo->dev.dvo_reg;
 	u32 temp = I915_READ(dvo_reg);
 
 	if (mode == DRM_MODE_DPMS_ON) {
 		I915_WRITE(dvo_reg, temp | DVO_ENABLE);
 		I915_READ(dvo_reg);
-		dvo->dev_ops->dpms(dvo, mode);
+		intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, mode);
 	} else {
-		dvo->dev_ops->dpms(dvo, mode);
+		intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, mode);
 		I915_WRITE(dvo_reg, temp & ~DVO_ENABLE);
 		I915_READ(dvo_reg);
 	}
@@ -99,39 +118,36 @@ static void intel_dvo_dpms(struct drm_encoder *encoder, int mode)
 static int intel_dvo_mode_valid(struct drm_connector *connector,
 				struct drm_display_mode *mode)
 {
-	struct drm_encoder *encoder = intel_attached_encoder(connector);
-	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
-	struct intel_dvo_device *dvo = intel_encoder->dev_priv;
+	struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
 
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return MODE_NO_DBLESCAN;
 
 	/* XXX: Validate clock range */
 
-	if (dvo->panel_fixed_mode) {
-		if (mode->hdisplay > dvo->panel_fixed_mode->hdisplay)
+	if (intel_dvo->panel_fixed_mode) {
+		if (mode->hdisplay > intel_dvo->panel_fixed_mode->hdisplay)
 			return MODE_PANEL;
-		if (mode->vdisplay > dvo->panel_fixed_mode->vdisplay)
+		if (mode->vdisplay > intel_dvo->panel_fixed_mode->vdisplay)
 			return MODE_PANEL;
 	}
 
-	return dvo->dev_ops->mode_valid(dvo, mode);
+	return intel_dvo->dev.dev_ops->mode_valid(&intel_dvo->dev, mode);
 }
 
 static bool intel_dvo_mode_fixup(struct drm_encoder *encoder,
 				 struct drm_display_mode *mode,
 				 struct drm_display_mode *adjusted_mode)
 {
-	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
-	struct intel_dvo_device *dvo = intel_encoder->dev_priv;
+	struct intel_dvo *intel_dvo = enc_to_intel_dvo(encoder);
 
 	/* If we have timings from the BIOS for the panel, put them in
 	 * to the adjusted mode.  The CRTC will be set up for this mode,
 	 * with the panel scaling set up to source from the H/VDisplay
 	 * of the original mode.
 	 */
-	if (dvo->panel_fixed_mode != NULL) {
-#define C(x) adjusted_mode->x = dvo->panel_fixed_mode->x
+	if (intel_dvo->panel_fixed_mode != NULL) {
+#define C(x) adjusted_mode->x = intel_dvo->panel_fixed_mode->x
 		C(hdisplay);
 		C(hsync_start);
 		C(hsync_end);
@@ -145,8 +161,8 @@ static bool intel_dvo_mode_fixup(struct drm_encoder *encoder,
 #undef C
 	}
 
-	if (dvo->dev_ops->mode_fixup)
-		return dvo->dev_ops->mode_fixup(dvo, mode, adjusted_mode);
+	if (intel_dvo->dev.dev_ops->mode_fixup)
+		return intel_dvo->dev.dev_ops->mode_fixup(&intel_dvo->dev, mode, adjusted_mode);
 
 	return true;
 }
@@ -158,11 +174,10 @@ static void intel_dvo_mode_set(struct drm_encoder *encoder,
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
-	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
-	struct intel_dvo_device *dvo = intel_encoder->dev_priv;
+	struct intel_dvo *intel_dvo = enc_to_intel_dvo(encoder);
 	int pipe = intel_crtc->pipe;
 	u32 dvo_val;
-	u32 dvo_reg = dvo->dvo_reg, dvo_srcdim_reg;
+	u32 dvo_reg = intel_dvo->dev.dvo_reg, dvo_srcdim_reg;
 	int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
 
 	switch (dvo_reg) {
@@ -178,7 +193,7 @@ static void intel_dvo_mode_set(struct drm_encoder *encoder,
 		break;
 	}
 
-	dvo->dev_ops->mode_set(dvo, mode, adjusted_mode);
+	intel_dvo->dev.dev_ops->mode_set(&intel_dvo->dev, mode, adjusted_mode);
 
 	/* Save the data order, since I don't know what it should be set to. */
 	dvo_val = I915_READ(dvo_reg) &
@@ -211,43 +226,41 @@ static void intel_dvo_mode_set(struct drm_encoder *encoder,
  *
  * Unimplemented.
  */
-static enum drm_connector_status intel_dvo_detect(struct drm_connector *connector)
+static enum drm_connector_status
+intel_dvo_detect(struct drm_connector *connector, bool force)
 {
-	struct drm_encoder *encoder = intel_attached_encoder(connector);
-	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
-	struct intel_dvo_device *dvo = intel_encoder->dev_priv;
-
-	return dvo->dev_ops->detect(dvo);
+	struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
+	return intel_dvo->dev.dev_ops->detect(&intel_dvo->dev);
 }
 
 static int intel_dvo_get_modes(struct drm_connector *connector)
 {
-	struct drm_encoder *encoder = intel_attached_encoder(connector);
-	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
-	struct intel_dvo_device *dvo = intel_encoder->dev_priv;
+	struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
+	struct drm_i915_private *dev_priv = connector->dev->dev_private;
 
 	/* We should probably have an i2c driver get_modes function for those
 	 * devices which will have a fixed set of modes determined by the chip
 	 * (TV-out, for example), but for now with just TMDS and LVDS,
 	 * that's not the case.
 	 */
-	intel_ddc_get_modes(connector, intel_encoder->ddc_bus);
+	intel_ddc_get_modes(connector,
+			    &dev_priv->gmbus[GMBUS_PORT_DPC].adapter);
 	if (!list_empty(&connector->probed_modes))
 		return 1;
 
-
-	if (dvo->panel_fixed_mode != NULL) {
+	if (intel_dvo->panel_fixed_mode != NULL) {
 		struct drm_display_mode *mode;
-		mode = drm_mode_duplicate(connector->dev, dvo->panel_fixed_mode);
+		mode = drm_mode_duplicate(connector->dev, intel_dvo->panel_fixed_mode);
 		if (mode) {
 			drm_mode_probed_add(connector, mode);
 			return 1;
 		}
 	}
+
 	return 0;
 }
 
-static void intel_dvo_destroy (struct drm_connector *connector)
+static void intel_dvo_destroy(struct drm_connector *connector)
 {
 	drm_sysfs_connector_remove(connector);
 	drm_connector_cleanup(connector);
@@ -272,33 +285,25 @@ static const struct drm_connector_funcs intel_dvo_connector_funcs = {
 static const struct drm_connector_helper_funcs intel_dvo_connector_helper_funcs = {
 	.mode_valid = intel_dvo_mode_valid,
 	.get_modes = intel_dvo_get_modes,
-	.best_encoder = intel_attached_encoder,
+	.best_encoder = intel_best_encoder,
 };
 
 static void intel_dvo_enc_destroy(struct drm_encoder *encoder)
 {
-	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
-	struct intel_dvo_device *dvo = intel_encoder->dev_priv;
-
-	if (dvo) {
-		if (dvo->dev_ops->destroy)
-			dvo->dev_ops->destroy(dvo);
-		if (dvo->panel_fixed_mode)
-			kfree(dvo->panel_fixed_mode);
-	}
-	if (intel_encoder->i2c_bus)
-		intel_i2c_destroy(intel_encoder->i2c_bus);
-	if (intel_encoder->ddc_bus)
-		intel_i2c_destroy(intel_encoder->ddc_bus);
-	drm_encoder_cleanup(encoder);
-	kfree(intel_encoder);
+	struct intel_dvo *intel_dvo = enc_to_intel_dvo(encoder);
+
+	if (intel_dvo->dev.dev_ops->destroy)
+		intel_dvo->dev.dev_ops->destroy(&intel_dvo->dev);
+
+	kfree(intel_dvo->panel_fixed_mode);
+
+	intel_encoder_destroy(encoder);
 }
 
 static const struct drm_encoder_funcs intel_dvo_enc_funcs = {
 	.destroy = intel_dvo_enc_destroy,
 };
 
-
 /**
  * Attempts to get a fixed panel timing for LVDS (currently only the i830).
  *
@@ -306,15 +311,12 @@ static const struct drm_encoder_funcs intel_dvo_enc_funcs = {
  * chip being on DVOB/C and having multiple pipes.
  */
 static struct drm_display_mode *
-intel_dvo_get_current_mode (struct drm_connector *connector)
+intel_dvo_get_current_mode(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct drm_encoder *encoder = intel_attached_encoder(connector);
-	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
-	struct intel_dvo_device *dvo = intel_encoder->dev_priv;
-	uint32_t dvo_reg = dvo->dvo_reg;
-	uint32_t dvo_val = I915_READ(dvo_reg);
+	struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
+	uint32_t dvo_val = I915_READ(intel_dvo->dev.dvo_reg);
 	struct drm_display_mode *mode = NULL;
 
 	/* If the DVO port is active, that'll be the LVDS, so we can pull out
@@ -324,10 +326,9 @@ intel_dvo_get_current_mode (struct drm_connector *connector)
 		struct drm_crtc *crtc;
 		int pipe = (dvo_val & DVO_PIPE_B_SELECT) ? 1 : 0;
 
-		crtc = intel_get_crtc_from_pipe(dev, pipe);
+		crtc = intel_get_crtc_for_pipe(dev, pipe);
 		if (crtc) {
 			mode = intel_crtc_mode_get(dev, crtc);
-
 			if (mode) {
 				mode->type |= DRM_MODE_TYPE_PREFERRED;
 				if (dvo_val & DVO_HSYNC_ACTIVE_HIGH)
@@ -337,40 +338,40 @@ intel_dvo_get_current_mode (struct drm_connector *connector)
 			}
 		}
 	}
+
 	return mode;
 }
 
 void intel_dvo_init(struct drm_device *dev)
 {
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_encoder *intel_encoder;
+	struct intel_dvo *intel_dvo;
 	struct intel_connector *intel_connector;
-	struct intel_dvo_device *dvo;
-	struct i2c_adapter *i2cbus = NULL;
-	int ret = 0;
 	int i;
 	int encoder_type = DRM_MODE_ENCODER_NONE;
-	intel_encoder = kzalloc (sizeof(struct intel_encoder), GFP_KERNEL);
-	if (!intel_encoder)
+
+	intel_dvo = kzalloc(sizeof(struct intel_dvo), GFP_KERNEL);
+	if (!intel_dvo)
 		return;
 
 	intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
 	if (!intel_connector) {
-		kfree(intel_encoder);
+		kfree(intel_dvo);
 		return;
 	}
 
-	/* Set up the DDC bus */
-	intel_encoder->ddc_bus = intel_i2c_create(dev, GPIOD, "DVODDC_D");
-	if (!intel_encoder->ddc_bus)
-		goto free_intel;
+	intel_encoder = &intel_dvo->base;
+	drm_encoder_init(dev, &intel_encoder->base,
+			 &intel_dvo_enc_funcs, encoder_type);
 
 	/* Now, try to find a controller */
 	for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) {
 		struct drm_connector *connector = &intel_connector->base;
+		const struct intel_dvo_device *dvo = &intel_dvo_devices[i];
+		struct i2c_adapter *i2c;
 		int gpio;
 
-		dvo = &intel_dvo_devices[i];
-
 		/* Allow the I2C driver info to specify the GPIO to be used in
 		 * special cases, but otherwise default to what's defined
 		 * in the spec.
@@ -378,27 +379,18 @@ void intel_dvo_init(struct drm_device *dev)
 		if (dvo->gpio != 0)
 			gpio = dvo->gpio;
 		else if (dvo->type == INTEL_DVO_CHIP_LVDS)
-			gpio = GPIOB;
+			gpio = GMBUS_PORT_SSC;
 		else
-			gpio = GPIOE;
+			gpio = GMBUS_PORT_DPB;
 
 		/* Set up the I2C bus necessary for the chip we're probing.
 		 * It appears that everything is on GPIOE except for panels
 		 * on i830 laptops, which are on GPIOB (DVOA).
 		 */
-		if (i2cbus != NULL)
-			intel_i2c_destroy(i2cbus);
-		if (!(i2cbus = intel_i2c_create(dev, gpio,
-			gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) {
-			continue;
-		}
+		i2c = &dev_priv->gmbus[gpio].adapter;
 
-		if (dvo->dev_ops!= NULL)
-			ret = dvo->dev_ops->init(dvo, i2cbus);
-		else
-			ret = false;
-
-		if (!ret)
+		intel_dvo->dev = *dvo;
+		if (!dvo->dev_ops->init(&intel_dvo->dev, i2c))
 			continue;
 
 		intel_encoder->type = INTEL_OUTPUT_DVO;
@@ -429,16 +421,10 @@ void intel_dvo_init(struct drm_device *dev)
 		connector->interlace_allowed = false;
 		connector->doublescan_allowed = false;
 
-		intel_encoder->dev_priv = dvo;
-		intel_encoder->i2c_bus = i2cbus;
-
-		drm_encoder_init(dev, &intel_encoder->enc,
-				 &intel_dvo_enc_funcs, encoder_type);
-		drm_encoder_helper_add(&intel_encoder->enc,
+		drm_encoder_helper_add(&intel_encoder->base,
 				       &intel_dvo_helper_funcs);
 
-		drm_mode_connector_attach_encoder(&intel_connector->base,
-						  &intel_encoder->enc);
+		intel_connector_attach_encoder(intel_connector, intel_encoder);
 		if (dvo->type == INTEL_DVO_CHIP_LVDS) {
 			/* For our LVDS chipsets, we should hopefully be able
 			 * to dig the fixed panel mode out of the BIOS data.
@@ -447,20 +433,16 @@ void intel_dvo_init(struct drm_device *dev)
 			 * headers, likely), so for now, just get the current
 			 * mode being output through DVO.
 			 */
-			dvo->panel_fixed_mode =
+			intel_dvo->panel_fixed_mode =
 				intel_dvo_get_current_mode(connector);
-			dvo->panel_wants_dither = true;
+			intel_dvo->panel_wants_dither = true;
 		}
 
 		drm_sysfs_connector_add(connector);
 		return;
 	}
 
-	intel_i2c_destroy(intel_encoder->ddc_bus);
-	/* Didn't find a chip, so tear down. */
-	if (i2cbus != NULL)
-		intel_i2c_destroy(i2cbus);
-free_intel:
-	kfree(intel_encoder);
+	drm_encoder_cleanup(&intel_encoder->base);
+	kfree(intel_dvo);
 	kfree(intel_connector);
 }