diff options
Diffstat (limited to 'drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h')
| -rw-r--r-- | drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h | 348 |
1 files changed, 348 insertions, 0 deletions
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h new file mode 100644 index 000000000000..1240f505ca53 --- /dev/null +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h @@ -0,0 +1,348 @@ +/* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DPU_HW_UTIL_H +#define _DPU_HW_UTIL_H + +#include <linux/io.h> +#include <linux/slab.h> +#include "dpu_hw_mdss.h" + +#define REG_MASK(n) ((BIT(n)) - 1) +struct dpu_format_extended; + +/* + * This is the common struct maintained by each sub block + * for mapping the register offsets in this block to the + * absoulute IO address + * @base_off: mdp register mapped offset + * @blk_off: pipe offset relative to mdss offset + * @length length of register block offset + * @xin_id xin id + * @hwversion mdss hw version number + */ +struct dpu_hw_blk_reg_map { + void __iomem *base_off; + u32 blk_off; + u32 length; + u32 xin_id; + u32 hwversion; + u32 log_mask; +}; + +/** + * struct dpu_hw_scaler3_de_cfg : QSEEDv3 detail enhancer configuration + * @enable: detail enhancer enable/disable + * @sharpen_level1: sharpening strength for noise + * @sharpen_level2: sharpening strength for signal + * @ clip: clip shift + * @ limit: limit value + * @ thr_quiet: quiet threshold + * @ thr_dieout: dieout threshold + * @ thr_high: low threshold + * @ thr_high: high threshold + * @ prec_shift: precision shift + * @ adjust_a: A-coefficients for mapping curve + * @ adjust_b: B-coefficients for mapping curve + * @ adjust_c: C-coefficients for mapping curve + */ +struct dpu_hw_scaler3_de_cfg { + u32 enable; + int16_t sharpen_level1; + int16_t sharpen_level2; + uint16_t clip; + uint16_t limit; + uint16_t thr_quiet; + uint16_t thr_dieout; + uint16_t thr_low; + uint16_t thr_high; + uint16_t prec_shift; + int16_t adjust_a[DPU_MAX_DE_CURVES]; + int16_t adjust_b[DPU_MAX_DE_CURVES]; + int16_t adjust_c[DPU_MAX_DE_CURVES]; +}; + + +/** + * struct dpu_hw_scaler3_cfg : QSEEDv3 configuration + * @enable: scaler enable + * @dir_en: direction detection block enable + * @ init_phase_x: horizontal initial phase + * @ phase_step_x: horizontal phase step + * @ init_phase_y: vertical initial phase + * @ phase_step_y: vertical phase step + * @ preload_x: horizontal preload value + * @ preload_y: vertical preload value + * @ src_width: source width + * @ src_height: source height + * @ dst_width: destination width + * @ dst_height: destination height + * @ y_rgb_filter_cfg: y/rgb plane filter configuration + * @ uv_filter_cfg: uv plane filter configuration + * @ alpha_filter_cfg: alpha filter configuration + * @ blend_cfg: blend coefficients configuration + * @ lut_flag: scaler LUT update flags + * 0x1 swap LUT bank + * 0x2 update 2D filter LUT + * 0x4 update y circular filter LUT + * 0x8 update uv circular filter LUT + * 0x10 update y separable filter LUT + * 0x20 update uv separable filter LUT + * @ dir_lut_idx: 2D filter LUT index + * @ y_rgb_cir_lut_idx: y circular filter LUT index + * @ uv_cir_lut_idx: uv circular filter LUT index + * @ y_rgb_sep_lut_idx: y circular filter LUT index + * @ uv_sep_lut_idx: uv separable filter LUT index + * @ dir_lut: pointer to 2D LUT + * @ cir_lut: pointer to circular filter LUT + * @ sep_lut: pointer to separable filter LUT + * @ de: detail enhancer configuration + */ +struct dpu_hw_scaler3_cfg { + u32 enable; + u32 dir_en; + int32_t init_phase_x[DPU_MAX_PLANES]; + int32_t phase_step_x[DPU_MAX_PLANES]; + int32_t init_phase_y[DPU_MAX_PLANES]; + int32_t phase_step_y[DPU_MAX_PLANES]; + + u32 preload_x[DPU_MAX_PLANES]; + u32 preload_y[DPU_MAX_PLANES]; + u32 src_width[DPU_MAX_PLANES]; + u32 src_height[DPU_MAX_PLANES]; + + u32 dst_width; + u32 dst_height; + + u32 y_rgb_filter_cfg; + u32 uv_filter_cfg; + u32 alpha_filter_cfg; + u32 blend_cfg; + + u32 lut_flag; + u32 dir_lut_idx; + + u32 y_rgb_cir_lut_idx; + u32 uv_cir_lut_idx; + u32 y_rgb_sep_lut_idx; + u32 uv_sep_lut_idx; + u32 *dir_lut; + size_t dir_len; + u32 *cir_lut; + size_t cir_len; + u32 *sep_lut; + size_t sep_len; + + /* + * Detail enhancer settings + */ + struct dpu_hw_scaler3_de_cfg de; +}; + +struct dpu_hw_scaler3_lut_cfg { + bool is_configured; + u32 *dir_lut; + size_t dir_len; + u32 *cir_lut; + size_t cir_len; + u32 *sep_lut; + size_t sep_len; +}; + +/** + * struct dpu_drm_pix_ext_v1 - version 1 of pixel ext structure + * @num_ext_pxls_lr: Number of total horizontal pixels + * @num_ext_pxls_tb: Number of total vertical lines + * @left_ftch: Number of extra pixels to overfetch from left + * @right_ftch: Number of extra pixels to overfetch from right + * @top_ftch: Number of extra lines to overfetch from top + * @btm_ftch: Number of extra lines to overfetch from bottom + * @left_rpt: Number of extra pixels to repeat from left + * @right_rpt: Number of extra pixels to repeat from right + * @top_rpt: Number of extra lines to repeat from top + * @btm_rpt: Number of extra lines to repeat from bottom + */ +struct dpu_drm_pix_ext_v1 { + /* + * Number of pixels ext in left, right, top and bottom direction + * for all color components. + */ + int32_t num_ext_pxls_lr[DPU_MAX_PLANES]; + int32_t num_ext_pxls_tb[DPU_MAX_PLANES]; + + /* + * Number of pixels needs to be overfetched in left, right, top + * and bottom directions from source image for scaling. + */ + int32_t left_ftch[DPU_MAX_PLANES]; + int32_t right_ftch[DPU_MAX_PLANES]; + int32_t top_ftch[DPU_MAX_PLANES]; + int32_t btm_ftch[DPU_MAX_PLANES]; + /* + * Number of pixels needs to be repeated in left, right, top and + * bottom directions for scaling. + */ + int32_t left_rpt[DPU_MAX_PLANES]; + int32_t right_rpt[DPU_MAX_PLANES]; + int32_t top_rpt[DPU_MAX_PLANES]; + int32_t btm_rpt[DPU_MAX_PLANES]; + +}; + +/** + * struct dpu_drm_de_v1 - version 1 of detail enhancer structure + * @enable: Enables/disables detail enhancer + * @sharpen_level1: Sharpening strength for noise + * @sharpen_level2: Sharpening strength for context + * @clip: Clip coefficient + * @limit: Detail enhancer limit factor + * @thr_quiet: Quite zone threshold + * @thr_dieout: Die-out zone threshold + * @thr_low: Linear zone left threshold + * @thr_high: Linear zone right threshold + * @prec_shift: Detail enhancer precision + * @adjust_a: Mapping curves A coefficients + * @adjust_b: Mapping curves B coefficients + * @adjust_c: Mapping curves C coefficients + */ +struct dpu_drm_de_v1 { + uint32_t enable; + int16_t sharpen_level1; + int16_t sharpen_level2; + uint16_t clip; + uint16_t limit; + uint16_t thr_quiet; + uint16_t thr_dieout; + uint16_t thr_low; + uint16_t thr_high; + uint16_t prec_shift; + int16_t adjust_a[DPU_MAX_DE_CURVES]; + int16_t adjust_b[DPU_MAX_DE_CURVES]; + int16_t adjust_c[DPU_MAX_DE_CURVES]; +}; + +/** + * struct dpu_drm_scaler_v2 - version 2 of struct dpu_drm_scaler + * @enable: Scaler enable + * @dir_en: Detail enhancer enable + * @pe: Pixel extension settings + * @horz_decimate: Horizontal decimation factor + * @vert_decimate: Vertical decimation factor + * @init_phase_x: Initial scaler phase values for x + * @phase_step_x: Phase step values for x + * @init_phase_y: Initial scaler phase values for y + * @phase_step_y: Phase step values for y + * @preload_x: Horizontal preload value + * @preload_y: Vertical preload value + * @src_width: Source width + * @src_height: Source height + * @dst_width: Destination width + * @dst_height: Destination height + * @y_rgb_filter_cfg: Y/RGB plane filter configuration + * @uv_filter_cfg: UV plane filter configuration + * @alpha_filter_cfg: Alpha filter configuration + * @blend_cfg: Selection of blend coefficients + * @lut_flag: LUT configuration flags + * @dir_lut_idx: 2d 4x4 LUT index + * @y_rgb_cir_lut_idx: Y/RGB circular LUT index + * @uv_cir_lut_idx: UV circular LUT index + * @y_rgb_sep_lut_idx: Y/RGB separable LUT index + * @uv_sep_lut_idx: UV separable LUT index + * @de: Detail enhancer settings + */ +struct dpu_drm_scaler_v2 { + /* + * General definitions + */ + uint32_t enable; + uint32_t dir_en; + + /* + * Pix ext settings + */ + struct dpu_drm_pix_ext_v1 pe; + + /* + * Decimation settings + */ + uint32_t horz_decimate; + uint32_t vert_decimate; + + /* + * Phase settings + */ + int32_t init_phase_x[DPU_MAX_PLANES]; + int32_t phase_step_x[DPU_MAX_PLANES]; + int32_t init_phase_y[DPU_MAX_PLANES]; + int32_t phase_step_y[DPU_MAX_PLANES]; + + uint32_t preload_x[DPU_MAX_PLANES]; + uint32_t preload_y[DPU_MAX_PLANES]; + uint32_t src_width[DPU_MAX_PLANES]; + uint32_t src_height[DPU_MAX_PLANES]; + + uint32_t dst_width; + uint32_t dst_height; + + uint32_t y_rgb_filter_cfg; + uint32_t uv_filter_cfg; + uint32_t alpha_filter_cfg; + uint32_t blend_cfg; + + uint32_t lut_flag; + uint32_t dir_lut_idx; + + /* for Y(RGB) and UV planes*/ + uint32_t y_rgb_cir_lut_idx; + uint32_t uv_cir_lut_idx; + uint32_t y_rgb_sep_lut_idx; + uint32_t uv_sep_lut_idx; + + /* + * Detail enhancer settings + */ + struct dpu_drm_de_v1 de; +}; + + +u32 *dpu_hw_util_get_log_mask_ptr(void); + +void dpu_reg_write(struct dpu_hw_blk_reg_map *c, + u32 reg_off, + u32 val, + const char *name); +int dpu_reg_read(struct dpu_hw_blk_reg_map *c, u32 reg_off); + +#define DPU_REG_WRITE(c, off, val) dpu_reg_write(c, off, val, #off) +#define DPU_REG_READ(c, off) dpu_reg_read(c, off) + +#define MISR_FRAME_COUNT_MASK 0xFF +#define MISR_CTRL_ENABLE BIT(8) +#define MISR_CTRL_STATUS BIT(9) +#define MISR_CTRL_STATUS_CLEAR BIT(10) +#define INTF_MISR_CTRL_FREE_RUN_MASK BIT(31) + +void *dpu_hw_util_get_dir(void); + +void dpu_hw_setup_scaler3(struct dpu_hw_blk_reg_map *c, + struct dpu_hw_scaler3_cfg *scaler3_cfg, + u32 scaler_offset, u32 scaler_version, + const struct dpu_format *format); + +u32 dpu_hw_get_scaler3_ver(struct dpu_hw_blk_reg_map *c, + u32 scaler_offset); + +void dpu_hw_csc_setup(struct dpu_hw_blk_reg_map *c, + u32 csc_reg_off, + struct dpu_csc_cfg *data, bool csc10); + +#endif /* _DPU_HW_UTIL_H */ |