summaryrefslogtreecommitdiffstats
path: root/drivers/input/touchscreen/atmel_tsadcc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input/touchscreen/atmel_tsadcc.c')
-rw-r--r--drivers/input/touchscreen/atmel_tsadcc.c47
1 files changed, 38 insertions, 9 deletions
diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c
index 9c7fce4d74d0..3d9b5166ebe9 100644
--- a/drivers/input/touchscreen/atmel_tsadcc.c
+++ b/drivers/input/touchscreen/atmel_tsadcc.c
@@ -22,6 +22,8 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
/* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */
@@ -36,7 +38,9 @@
#define ATMEL_TSADCC_LOWRES (1 << 4) /* Resolution selection */
#define ATMEL_TSADCC_SLEEP (1 << 5) /* Sleep mode */
#define ATMEL_TSADCC_PENDET (1 << 6) /* Pen Detect selection */
+#define ATMEL_TSADCC_PRES (1 << 7) /* Pressure Measurement Selection */
#define ATMEL_TSADCC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */
+#define ATMEL_TSADCC_EPRESCAL (0xff << 8) /* Prescalar Rate Selection (Extended) */
#define ATMEL_TSADCC_STARTUP (0x7f << 16) /* Start Up time */
#define ATMEL_TSADCC_SHTIM (0xf << 24) /* Sample & Hold time */
#define ATMEL_TSADCC_PENDBC (0xf << 28) /* Pen Detect debouncing time */
@@ -84,7 +88,13 @@
#define ATMEL_TSADCC_CDR4 0x40 /* Channel Data 4 */
#define ATMEL_TSADCC_CDR5 0x44 /* Channel Data 5 */
-#define ADC_CLOCK 1000000
+#define ATMEL_TSADCC_XPOS 0x50
+#define ATMEL_TSADCC_Z1DAT 0x54
+#define ATMEL_TSADCC_Z2DAT 0x58
+
+#define PRESCALER_VAL(x) ((x) >> 8)
+
+#define ADC_DEFAULT_CLOCK 100000
struct atmel_tsadcc {
struct input_dev *input;
@@ -172,6 +182,7 @@ static int __devinit atmel_tsadcc_probe(struct platform_device *pdev)
struct atmel_tsadcc *ts_dev;
struct input_dev *input_dev;
struct resource *res;
+ struct at91_tsadcc_data *pdata = pdev->dev.platform_data;
int err = 0;
unsigned int prsc;
unsigned int reg;
@@ -242,31 +253,49 @@ static int __devinit atmel_tsadcc_probe(struct platform_device *pdev)
input_dev->phys = ts_dev->phys;
input_dev->dev.parent = &pdev->dev;
- input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
- input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
-
+ __set_bit(EV_ABS, input_dev->evbit);
input_set_abs_params(input_dev, ABS_X, 0, 0x3FF, 0, 0);
input_set_abs_params(input_dev, ABS_Y, 0, 0x3FF, 0, 0);
+ input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
+
/* clk_enable() always returns 0, no need to check it */
clk_enable(ts_dev->clk);
prsc = clk_get_rate(ts_dev->clk);
dev_info(&pdev->dev, "Master clock is set at: %d Hz\n", prsc);
- prsc = prsc / ADC_CLOCK / 2 - 1;
+ if (!pdata)
+ goto err_fail;
+
+ if (!pdata->adc_clock)
+ pdata->adc_clock = ADC_DEFAULT_CLOCK;
+
+ prsc = (prsc / (2 * pdata->adc_clock)) - 1;
+
+ /* saturate if this value is too high */
+ if (cpu_is_at91sam9rl()) {
+ if (prsc > PRESCALER_VAL(ATMEL_TSADCC_PRESCAL))
+ prsc = PRESCALER_VAL(ATMEL_TSADCC_PRESCAL);
+ } else {
+ if (prsc > PRESCALER_VAL(ATMEL_TSADCC_EPRESCAL))
+ prsc = PRESCALER_VAL(ATMEL_TSADCC_EPRESCAL);
+ }
+
+ dev_info(&pdev->dev, "Prescaler is set at: %d\n", prsc);
reg = ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE |
((0x00 << 5) & ATMEL_TSADCC_SLEEP) | /* Normal Mode */
((0x01 << 6) & ATMEL_TSADCC_PENDET) | /* Enable Pen Detect */
- ((prsc << 8) & ATMEL_TSADCC_PRESCAL) | /* PRESCAL */
- ((0x13 << 16) & ATMEL_TSADCC_STARTUP) | /* STARTUP */
- ((0x0F << 28) & ATMEL_TSADCC_PENDBC); /* PENDBC */
+ (prsc << 8) |
+ ((0x26 << 16) & ATMEL_TSADCC_STARTUP) |
+ ((pdata->pendet_debounce << 28) & ATMEL_TSADCC_PENDBC);
atmel_tsadcc_write(ATMEL_TSADCC_CR, ATMEL_TSADCC_SWRST);
atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE);
- atmel_tsadcc_write(ATMEL_TSADCC_TSR, (0x3 << 24) & ATMEL_TSADCC_TSSHTIM);
+ atmel_tsadcc_write(ATMEL_TSADCC_TSR,
+ (pdata->ts_sample_hold_time << 24) & ATMEL_TSADCC_TSSHTIM);
atmel_tsadcc_read(ATMEL_TSADCC_SR);
atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT);