diff options
Diffstat (limited to 'drivers/media/platform/atmel/atmel-isc.c')
| -rw-r--r-- | drivers/media/platform/atmel/atmel-isc.c | 34 |
1 files changed, 34 insertions, 0 deletions
diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c index 4bba9da206e4..96ab8da0e4be 100644 --- a/drivers/media/platform/atmel/atmel-isc.c +++ b/drivers/media/platform/atmel/atmel-isc.c @@ -721,6 +721,40 @@ static void isc_start_dma(struct isc_device *isc) u32 sizeimage = isc->fmt.fmt.pix.sizeimage; u32 dctrl_dview; dma_addr_t addr0; + u32 h, w; + + h = isc->fmt.fmt.pix.height; + w = isc->fmt.fmt.pix.width; + + /* + * In case the sensor is not RAW, it will output a pixel (12-16 bits) + * with two samples on the ISC Data bus (which is 8-12) + * ISC will count each sample, so, we need to multiply these values + * by two, to get the real number of samples for the required pixels. + */ + if (!ISC_IS_FORMAT_RAW(isc->config.sd_format->mbus_code)) { + h <<= 1; + w <<= 1; + } + + /* + * We limit the column/row count that the ISC will output according + * to the configured resolution that we want. + * This will avoid the situation where the sensor is misconfigured, + * sending more data, and the ISC will just take it and DMA to memory, + * causing corruption. + */ + regmap_write(regmap, ISC_PFE_CFG1, + (ISC_PFE_CFG1_COLMIN(0) & ISC_PFE_CFG1_COLMIN_MASK) | + (ISC_PFE_CFG1_COLMAX(w - 1) & ISC_PFE_CFG1_COLMAX_MASK)); + + regmap_write(regmap, ISC_PFE_CFG2, + (ISC_PFE_CFG2_ROWMIN(0) & ISC_PFE_CFG2_ROWMIN_MASK) | + (ISC_PFE_CFG2_ROWMAX(h - 1) & ISC_PFE_CFG2_ROWMAX_MASK)); + + regmap_update_bits(regmap, ISC_PFE_CFG0, + ISC_PFE_CFG0_COLEN | ISC_PFE_CFG0_ROWEN, + ISC_PFE_CFG0_COLEN | ISC_PFE_CFG0_ROWEN); addr0 = vb2_dma_contig_plane_dma_addr(&isc->cur_frm->vb.vb2_buf, 0); regmap_write(regmap, ISC_DAD0, addr0); |