1 files changed, 219 insertions, 140 deletions

diff --git a/drivers/media/usb/em28xx/em28xx-input.c b/drivers/media/usb/em28xx/em28xx-input.c
index 660bf803c9e4..1bef990b3f18 100644
--- a/drivers/media/usb/em28xx/em28xx-input.c
+++ b/drivers/media/usb/em28xx/em28xx-input.c
@@ -40,11 +40,6 @@ MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
 
 #define MODULE_NAME "em28xx"
 
-#define i2cdprintk(fmt, arg...) \
-	if (ir_debug) { \
-		printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
-	}
-
 #define dprintk(fmt, arg...) \
 	if (ir_debug) { \
 		printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
@@ -57,8 +52,8 @@ MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
 struct em28xx_ir_poll_result {
 	unsigned int toggle_bit:1;
 	unsigned int read_count:7;
-	u8 rc_address;
-	u8 rc_data[4]; /* 1 byte on em2860/2880, 4 on em2874 */
+
+	u32 scancode;
 };
 
 struct em28xx_IR {
@@ -67,12 +62,17 @@ struct em28xx_IR {
 	char name[32];
 	char phys[32];
 
-	/* poll external decoder */
+	/* poll decoder */
 	int polling;
 	struct delayed_work work;
 	unsigned int full_code:1;
 	unsigned int last_readcount;
+	u64 rc_type;
 
+	/* i2c slave address of external device (if used) */
+	u16 i2c_dev_addr;
+
+	int  (*get_key_i2c)(struct i2c_client *, u32 *);
 	int  (*get_key)(struct em28xx_IR *, struct em28xx_ir_poll_result *);
 };
 
@@ -80,21 +80,16 @@ struct em28xx_IR {
  I2C IR based get keycodes - should be used with ir-kbd-i2c
  **********************************************************/
 
-static int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
+static int em28xx_get_key_terratec(struct i2c_client *i2c_dev, u32 *ir_key)
 {
 	unsigned char b;
 
 	/* poll IR chip */
-	if (1 != i2c_master_recv(ir->c, &b, 1)) {
-		i2cdprintk("read error\n");
+	if (1 != i2c_master_recv(i2c_dev, &b, 1))
 		return -EIO;
-	}
 
 	/* it seems that 0xFE indicates that a button is still hold
-	   down, while 0xff indicates that no button is hold
-	   down. 0xfe sequences are sometimes interrupted by 0xFF */
-
-	i2cdprintk("key %02x\n", b);
+	   down, while 0xff indicates that no button is hold down. */
 
 	if (b == 0xff)
 		return 0;
@@ -104,18 +99,17 @@ static int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 		return 1;
 
 	*ir_key = b;
-	*ir_raw = b;
 	return 1;
 }
 
-static int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
+static int em28xx_get_key_em_haup(struct i2c_client *i2c_dev, u32 *ir_key)
 {
 	unsigned char buf[2];
 	u16 code;
 	int size;
 
 	/* poll IR chip */
-	size = i2c_master_recv(ir->c, buf, sizeof(buf));
+	size = i2c_master_recv(i2c_dev, buf, sizeof(buf));
 
 	if (size != 2)
 		return -EIO;
@@ -124,8 +118,6 @@ static int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	if (buf[1] == 0xff)
 		return 0;
 
-	ir->old = buf[1];
-
 	/*
 	 * Rearranges bits to the right order.
 	 * The bit order were determined experimentally by using
@@ -148,65 +140,51 @@ static int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 		 ((buf[1] & 0x40) ? 0x0200 : 0) | /* 0000 0010		  */
 		 ((buf[1] & 0x80) ? 0x0100 : 0);  /* 0000 0001		  */
 
-	i2cdprintk("ir hauppauge (em2840): code=0x%02x (rcv=0x%02x%02x)\n",
-			code, buf[1], buf[0]);
-
 	/* return key */
 	*ir_key = code;
-	*ir_raw = code;
 	return 1;
 }
 
-static int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
-				     u32 *ir_raw)
+static int em28xx_get_key_pinnacle_usb_grey(struct i2c_client *i2c_dev,
+					    u32 *ir_key)
 {
 	unsigned char buf[3];
 
 	/* poll IR chip */
 
-	if (3 != i2c_master_recv(ir->c, buf, 3)) {
-		i2cdprintk("read error\n");
+	if (3 != i2c_master_recv(i2c_dev, buf, 3))
 		return -EIO;
-	}
 
-	i2cdprintk("key %02x\n", buf[2]&0x3f);
 	if (buf[0] != 0x00)
 		return 0;
 
 	*ir_key = buf[2]&0x3f;
-	*ir_raw = buf[2]&0x3f;
 
 	return 1;
 }
 
-static int em28xx_get_key_winfast_usbii_deluxe(struct IR_i2c *ir, u32 *ir_key,
-					u32 *ir_raw)
+static int em28xx_get_key_winfast_usbii_deluxe(struct i2c_client *i2c_dev,
+					       u32 *ir_key)
 {
 	unsigned char subaddr, keydetect, key;
 
-	struct i2c_msg msg[] = { { .addr = ir->c->addr, .flags = 0, .buf = &subaddr, .len = 1},
-
-				{ .addr = ir->c->addr, .flags = I2C_M_RD, .buf = &keydetect, .len = 1} };
+	struct i2c_msg msg[] = { { .addr = i2c_dev->addr, .flags = 0, .buf = &subaddr, .len = 1},
+				 { .addr = i2c_dev->addr, .flags = I2C_M_RD, .buf = &keydetect, .len = 1} };
 
 	subaddr = 0x10;
-	if (2 != i2c_transfer(ir->c->adapter, msg, 2)) {
-		i2cdprintk("read error\n");
+	if (2 != i2c_transfer(i2c_dev->adapter, msg, 2))
 		return -EIO;
-	}
 	if (keydetect == 0x00)
 		return 0;
 
 	subaddr = 0x00;
 	msg[1].buf = &key;
-	if (2 != i2c_transfer(ir->c->adapter, msg, 2)) {
-		i2cdprintk("read error\n");
-	return -EIO;
-	}
+	if (2 != i2c_transfer(i2c_dev->adapter, msg, 2))
+		return -EIO;
 	if (key == 0x00)
 		return 0;
 
 	*ir_key = key;
-	*ir_raw = key;
 	return 1;
 }
 
@@ -236,11 +214,8 @@ static int default_polling_getkey(struct em28xx_IR *ir,
 	/* Infrared read count (Reg 0x45[6:0] */
 	poll_result->read_count = (msg[0] & 0x7f);
 
-	/* Remote Control Address (Reg 0x46) */
-	poll_result->rc_address = msg[1];
-
-	/* Remote Control Data (Reg 0x47) */
-	poll_result->rc_data[0] = msg[2];
+	/* Remote Control Address/Data (Regs 0x46/0x47) */
+	poll_result->scancode = msg[1] << 8 | msg[2];
 
 	return 0;
 }
@@ -266,13 +241,35 @@ static int em2874_polling_getkey(struct em28xx_IR *ir,
 	/* Infrared read count (Reg 0x51[6:0] */
 	poll_result->read_count = (msg[0] & 0x7f);
 
-	/* Remote Control Address (Reg 0x52) */
-	poll_result->rc_address = msg[1];
-
-	/* Remote Control Data (Reg 0x53-55) */
-	poll_result->rc_data[0] = msg[2];
-	poll_result->rc_data[1] = msg[3];
-	poll_result->rc_data[2] = msg[4];
+	/*
+	 * Remote Control Address (Reg 0x52)
+	 * Remote Control Data (Reg 0x53-0x55)
+	 */
+	switch (ir->rc_type) {
+	case RC_BIT_RC5:
+		poll_result->scancode = msg[1] << 8 | msg[2];
+		break;
+	case RC_BIT_NEC:
+		if ((msg[3] ^ msg[4]) != 0xff)		/* 32 bits NEC */
+			poll_result->scancode = (msg[1] << 24) |
+						(msg[2] << 16) |
+						(msg[3] << 8)  |
+						 msg[4];
+		else if ((msg[1] ^ msg[2]) != 0xff)	/* 24 bits NEC */
+			poll_result->scancode = (msg[1] << 16) |
+						(msg[2] << 8)  |
+						 msg[3];
+		else					/* Normal NEC */
+			poll_result->scancode = msg[1] << 8 | msg[3];
+		break;
+	case RC_BIT_RC6_0:
+		poll_result->scancode = msg[1] << 8 | msg[2];
+		break;
+	default:
+		poll_result->scancode = (msg[1] << 24) | (msg[2] << 16) |
+					(msg[3] << 8)  | msg[4];
+		break;
+	}
 
 	return 0;
 }
@@ -281,6 +278,28 @@ static int em2874_polling_getkey(struct em28xx_IR *ir,
  Polling code for em28xx
  **********************************************************/
 
+static int em28xx_i2c_ir_handle_key(struct em28xx_IR *ir)
+{
+	static u32 ir_key;
+	int rc;
+	struct i2c_client client;
+
+	client.adapter = &ir->dev->i2c_adap;
+	client.addr = ir->i2c_dev_addr;
+
+	rc = ir->get_key_i2c(&client, &ir_key);
+	if (rc < 0) {
+		dprintk("ir->get_key_i2c() failed: %d\n", rc);
+		return rc;
+	}
+
+	if (rc) {
+		dprintk("%s: keycode = 0x%04x\n", __func__, ir_key);
+		rc_keydown(ir->rc, ir_key, 0);
+	}
+	return 0;
+}
+
 static void em28xx_ir_handle_key(struct em28xx_IR *ir)
 {
 	int result;
@@ -289,22 +308,21 @@ static void em28xx_ir_handle_key(struct em28xx_IR *ir)
 	/* read the registers containing the IR status */
 	result = ir->get_key(ir, &poll_result);
 	if (unlikely(result < 0)) {
-		dprintk("ir->get_key() failed %d\n", result);
+		dprintk("ir->get_key() failed: %d\n", result);
 		return;
 	}
 
 	if (unlikely(poll_result.read_count != ir->last_readcount)) {
-		dprintk("%s: toggle: %d, count: %d, key 0x%02x%02x\n", __func__,
+		dprintk("%s: toggle: %d, count: %d, key 0x%04x\n", __func__,
 			poll_result.toggle_bit, poll_result.read_count,
-			poll_result.rc_address, poll_result.rc_data[0]);
+			poll_result.scancode);
 		if (ir->full_code)
 			rc_keydown(ir->rc,
-				   poll_result.rc_address << 8 |
-				   poll_result.rc_data[0],
+				   poll_result.scancode,
 				   poll_result.toggle_bit);
 		else
 			rc_keydown(ir->rc,
-				   poll_result.rc_data[0],
+				   poll_result.scancode & 0xff,
 				   poll_result.toggle_bit);
 
 		if (ir->dev->chip_id == CHIP_ID_EM2874 ||
@@ -324,7 +342,10 @@ static void em28xx_ir_work(struct work_struct *work)
 {
 	struct em28xx_IR *ir = container_of(work, struct em28xx_IR, work.work);
 
-	em28xx_ir_handle_key(ir);
+	if (ir->i2c_dev_addr) /* external i2c device */
+		em28xx_i2c_ir_handle_key(ir);
+	else /* internal device */
+		em28xx_ir_handle_key(ir);
 	schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
 }
 
@@ -345,93 +366,107 @@ static void em28xx_ir_stop(struct rc_dev *rc)
 	cancel_delayed_work_sync(&ir->work);
 }
 
-static int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 *rc_type)
+static int em2860_ir_change_protocol(struct rc_dev *rc_dev, u64 *rc_type)
 {
-	int rc = 0;
 	struct em28xx_IR *ir = rc_dev->priv;
 	struct em28xx *dev = ir->dev;
-	u8 ir_config = EM2874_IR_RC5;
-
-	/* Adjust xclk based o IR table for RC5/NEC tables */
 
+	/* Adjust xclk based on IR table for RC5/NEC tables */
 	if (*rc_type & RC_BIT_RC5) {
 		dev->board.xclk |= EM28XX_XCLK_IR_RC5_MODE;
 		ir->full_code = 1;
 		*rc_type = RC_BIT_RC5;
 	} else if (*rc_type & RC_BIT_NEC) {
 		dev->board.xclk &= ~EM28XX_XCLK_IR_RC5_MODE;
-		ir_config = EM2874_IR_NEC;
 		ir->full_code = 1;
 		*rc_type = RC_BIT_NEC;
-	} else if (*rc_type != RC_BIT_UNKNOWN)
-		rc = -EINVAL;
+	} else if (*rc_type & RC_BIT_UNKNOWN) {
+		*rc_type = RC_BIT_UNKNOWN;
+	} else {
+		*rc_type = ir->rc_type;
+		return -EINVAL;
+	}
+	em28xx_write_reg_bits(dev, EM28XX_R0F_XCLK, dev->board.xclk,
+			      EM28XX_XCLK_IR_RC5_MODE);
+
+	ir->rc_type = *rc_type;
 
+	return 0;
+}
+
+static int em2874_ir_change_protocol(struct rc_dev *rc_dev, u64 *rc_type)
+{
+	struct em28xx_IR *ir = rc_dev->priv;
+	struct em28xx *dev = ir->dev;
+	u8 ir_config = EM2874_IR_RC5;
+
+	/* Adjust xclk and set type based on IR table for RC5/NEC/RC6 tables */
+	if (*rc_type & RC_BIT_RC5) {
+		dev->board.xclk |= EM28XX_XCLK_IR_RC5_MODE;
+		ir->full_code = 1;
+		*rc_type = RC_BIT_RC5;
+	} else if (*rc_type & RC_BIT_NEC) {
+		dev->board.xclk &= ~EM28XX_XCLK_IR_RC5_MODE;
+		ir_config = EM2874_IR_NEC | EM2874_IR_NEC_NO_PARITY;
+		ir->full_code = 1;
+		*rc_type = RC_BIT_NEC;
+	} else if (*rc_type & RC_BIT_RC6_0) {
+		dev->board.xclk |= EM28XX_XCLK_IR_RC5_MODE;
+		ir_config = EM2874_IR_RC6_MODE_0;
+		ir->full_code = 1;
+		*rc_type = RC_BIT_RC6_0;
+	} else if (*rc_type & RC_BIT_UNKNOWN) {
+		*rc_type = RC_BIT_UNKNOWN;
+	} else {
+		*rc_type = ir->rc_type;
+		return -EINVAL;
+	}
+	em28xx_write_regs(dev, EM2874_R50_IR_CONFIG, &ir_config, 1);
 	em28xx_write_reg_bits(dev, EM28XX_R0F_XCLK, dev->board.xclk,
 			      EM28XX_XCLK_IR_RC5_MODE);
 
+	ir->rc_type = *rc_type;
+
+	return 0;
+}
+static int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 *rc_type)
+{
+	struct em28xx_IR *ir = rc_dev->priv;
+	struct em28xx *dev = ir->dev;
+
 	/* Setup the proper handler based on the chip */
 	switch (dev->chip_id) {
 	case CHIP_ID_EM2860:
 	case CHIP_ID_EM2883:
-		ir->get_key = default_polling_getkey;
-		break;
+		return em2860_ir_change_protocol(rc_dev, rc_type);
 	case CHIP_ID_EM2884:
 	case CHIP_ID_EM2874:
 	case CHIP_ID_EM28174:
-		ir->get_key = em2874_polling_getkey;
-		em28xx_write_regs(dev, EM2874_R50_IR_CONFIG, &ir_config, 1);
-		break;
+		return em2874_ir_change_protocol(rc_dev, rc_type);
 	default:
 		printk("Unrecognized em28xx chip id 0x%02x: IR not supported\n",
 			dev->chip_id);
-		rc = -EINVAL;
+		return -EINVAL;
 	}
-
-	return rc;
 }
 
-static void em28xx_register_i2c_ir(struct em28xx *dev)
+static int em28xx_probe_i2c_ir(struct em28xx *dev)
 {
+	int i = 0;
 	/* Leadtek winfast tv USBII deluxe can find a non working IR-device */
 	/* at address 0x18, so if that address is needed for another board in */
 	/* the future, please put it after 0x1f. */
-	struct i2c_board_info info;
 	const unsigned short addr_list[] = {
 		 0x1f, 0x30, 0x47, I2C_CLIENT_END
 	};
 
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	memset(&dev->init_data, 0, sizeof(dev->init_data));
-	strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
-
-	/* detect & configure */
-	switch (dev->model) {
-	case EM2800_BOARD_TERRATEC_CINERGY_200:
-	case EM2820_BOARD_TERRATEC_CINERGY_250:
-		dev->init_data.ir_codes = RC_MAP_EM_TERRATEC;
-		dev->init_data.get_key = em28xx_get_key_terratec;
-		dev->init_data.name = "i2c IR (EM28XX Terratec)";
-		break;
-	case EM2820_BOARD_PINNACLE_USB_2:
-		dev->init_data.ir_codes = RC_MAP_PINNACLE_GREY;
-		dev->init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
-		dev->init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
-		break;
-	case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
-		dev->init_data.ir_codes = RC_MAP_HAUPPAUGE;
-		dev->init_data.get_key = em28xx_get_key_em_haup;
-		dev->init_data.name = "i2c IR (EM2840 Hauppauge)";
-		break;
-	case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE:
-		dev->init_data.ir_codes = RC_MAP_WINFAST_USBII_DELUXE;
-		dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe;
-		dev->init_data.name = "i2c IR (EM2820 Winfast TV USBII Deluxe)";
-		break;
+	while (addr_list[i] != I2C_CLIENT_END) {
+		if (i2c_probe_func_quick_read(&dev->i2c_adap, addr_list[i]) == 1)
+			return addr_list[i];
+		i++;
 	}
 
-	if (dev->init_data.name)
-		info.platform_data = &dev->init_data;
-	i2c_new_probed_device(&dev->i2c_adap, &info, addr_list, NULL);
+	return -ENODEV;
 }
 
 /**********************************************************
@@ -527,8 +562,21 @@ static int em28xx_ir_init(struct em28xx *dev)
 	struct rc_dev *rc;
 	int err = -ENOMEM;
 	u64 rc_type;
+	u16 i2c_rc_dev_addr = 0;
+
+	if (dev->board.has_snapshot_button)
+		em28xx_register_snapshot_button(dev);
+
+	if (dev->board.has_ir_i2c) {
+		i2c_rc_dev_addr = em28xx_probe_i2c_ir(dev);
+		if (!i2c_rc_dev_addr) {
+			dev->board.has_ir_i2c = 0;
+			em28xx_warn("No i2c IR remote control device found.\n");
+			return -ENODEV;
+		}
+	}
 
-	if (dev->board.ir_codes == NULL) {
+	if (dev->board.ir_codes == NULL && !dev->board.has_ir_i2c) {
 		/* No remote control support */
 		em28xx_warn("Remote control support is not available for "
 				"this card.\n");
@@ -538,35 +586,77 @@ static int em28xx_ir_init(struct em28xx *dev)
 	ir = kzalloc(sizeof(*ir), GFP_KERNEL);
 	rc = rc_allocate_device();
 	if (!ir || !rc)
-		goto err_out_free;
+		goto error;
 
 	/* record handles to ourself */
 	ir->dev = dev;
 	dev->ir = ir;
 	ir->rc = rc;
 
-	/*
-	 * em2874 supports more protocols. For now, let's just announce
-	 * the two protocols that were already tested
-	 */
-	rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC;
 	rc->priv = ir;
-	rc->change_protocol = em28xx_ir_change_protocol;
 	rc->open = em28xx_ir_start;
 	rc->close = em28xx_ir_stop;
 
-	/* By default, keep protocol field untouched */
-	rc_type = RC_BIT_UNKNOWN;
-	err = em28xx_ir_change_protocol(rc, &rc_type);
-	if (err)
-		goto err_out_free;
+	if (dev->board.has_ir_i2c) {	/* external i2c device */
+		switch (dev->model) {
+		case EM2800_BOARD_TERRATEC_CINERGY_200:
+		case EM2820_BOARD_TERRATEC_CINERGY_250:
+			rc->map_name = RC_MAP_EM_TERRATEC;
+			ir->get_key_i2c = em28xx_get_key_terratec;
+			break;
+		case EM2820_BOARD_PINNACLE_USB_2:
+			rc->map_name = RC_MAP_PINNACLE_GREY;
+			ir->get_key_i2c = em28xx_get_key_pinnacle_usb_grey;
+			break;
+		case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
+			rc->map_name = RC_MAP_HAUPPAUGE;
+			ir->get_key_i2c = em28xx_get_key_em_haup;
+			rc->allowed_protos = RC_BIT_RC5;
+			break;
+		case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE:
+			rc->map_name = RC_MAP_WINFAST_USBII_DELUXE;
+			ir->get_key_i2c = em28xx_get_key_winfast_usbii_deluxe;
+			break;
+		default:
+			err = -ENODEV;
+			goto error;
+		}
+
+		ir->i2c_dev_addr = i2c_rc_dev_addr;
+	} else {	/* internal device */
+		switch (dev->chip_id) {
+		case CHIP_ID_EM2860:
+		case CHIP_ID_EM2883:
+			rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC;
+			ir->get_key = default_polling_getkey;
+			break;
+		case CHIP_ID_EM2884:
+		case CHIP_ID_EM2874:
+		case CHIP_ID_EM28174:
+			ir->get_key = em2874_polling_getkey;
+			rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC |
+					     RC_BIT_RC6_0;
+			break;
+		default:
+			err = -ENODEV;
+			goto error;
+		}
+
+		rc->change_protocol = em28xx_ir_change_protocol;
+		rc->map_name = dev->board.ir_codes;
+
+		/* By default, keep protocol field untouched */
+		rc_type = RC_BIT_UNKNOWN;
+		err = em28xx_ir_change_protocol(rc, &rc_type);
+		if (err)
+			goto error;
+	}
 
 	/* This is how often we ask the chip for IR information */
 	ir->polling = 100; /* ms */
 
 	/* init input device */
-	snprintf(ir->name, sizeof(ir->name), "em28xx IR (%s)",
-						dev->name);
+	snprintf(ir->name, sizeof(ir->name), "em28xx IR (%s)", dev->name);
 
 	usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
 	strlcat(ir->phys, "/input0", sizeof(ir->phys));
@@ -578,28 +668,17 @@ static int em28xx_ir_init(struct em28xx *dev)
 	rc->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
 	rc->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
 	rc->dev.parent = &dev->udev->dev;
-	rc->map_name = dev->board.ir_codes;
 	rc->driver_name = MODULE_NAME;
 
 	/* all done */
 	err = rc_register_device(rc);
 	if (err)
-		goto err_out_stop;
-
-	em28xx_register_i2c_ir(dev);
-
-#if defined(CONFIG_MODULES) && defined(MODULE)
-	if (dev->board.has_ir_i2c)
-		request_module("ir-kbd-i2c");
-#endif
-	if (dev->board.has_snapshot_button)
-		em28xx_register_snapshot_button(dev);
+		goto error;
 
 	return 0;
 
- err_out_stop:
+error:
 	dev->ir = NULL;
- err_out_free:
 	rc_free_device(rc);
 	kfree(ir);
 	return err;