summaryrefslogtreecommitdiffstats
path: root/drivers/media/usb/gspca/finepix.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/usb/gspca/finepix.c')
-rw-r--r--drivers/media/usb/gspca/finepix.c306
1 files changed, 306 insertions, 0 deletions
diff --git a/drivers/media/usb/gspca/finepix.c b/drivers/media/usb/gspca/finepix.c
new file mode 100644
index 000000000000..c8f2201cc35a
--- /dev/null
+++ b/drivers/media/usb/gspca/finepix.c
@@ -0,0 +1,306 @@
+/*
+ * Fujifilm Finepix subdriver
+ *
+ * Copyright (C) 2008 Frank Zago
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define MODULE_NAME "finepix"
+
+#include "gspca.h"
+
+MODULE_AUTHOR("Frank Zago <frank@zago.net>");
+MODULE_DESCRIPTION("Fujifilm FinePix USB V4L2 driver");
+MODULE_LICENSE("GPL");
+
+/* Default timeout, in ms */
+#define FPIX_TIMEOUT 250
+
+/* Maximum transfer size to use. The windows driver reads by chunks of
+ * 0x2000 bytes, so do the same. Note: reading more seems to work
+ * too. */
+#define FPIX_MAX_TRANSFER 0x2000
+
+/* Structure to hold all of our device specific stuff */
+struct usb_fpix {
+ struct gspca_dev gspca_dev; /* !! must be the first item */
+
+ struct work_struct work_struct;
+ struct workqueue_struct *work_thread;
+};
+
+/* Delay after which claim the next frame. If the delay is too small,
+ * the camera will return old frames. On the 4800Z, 20ms is bad, 25ms
+ * will fail every 4 or 5 frames, but 30ms is perfect. On the A210,
+ * 30ms is bad while 35ms is perfect. */
+#define NEXT_FRAME_DELAY 35
+
+/* These cameras only support 320x200. */
+static const struct v4l2_pix_format fpix_mode[1] = {
+ { 320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 320,
+ .sizeimage = 320 * 240 * 3 / 8 + 590,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0}
+};
+
+/* send a command to the webcam */
+static int command(struct gspca_dev *gspca_dev,
+ int order) /* 0: reset, 1: frame request */
+{
+ static u8 order_values[2][12] = {
+ {0xc6, 0, 0, 0, 0, 0, 0, 0, 0x20, 0, 0, 0}, /* reset */
+ {0xd3, 0, 0, 0, 0, 0, 0, 0x01, 0, 0, 0, 0}, /* fr req */
+ };
+
+ memcpy(gspca_dev->usb_buf, order_values[order], 12);
+ return usb_control_msg(gspca_dev->dev,
+ usb_sndctrlpipe(gspca_dev->dev, 0),
+ USB_REQ_GET_STATUS,
+ USB_DIR_OUT | USB_TYPE_CLASS |
+ USB_RECIP_INTERFACE, 0, 0, gspca_dev->usb_buf,
+ 12, FPIX_TIMEOUT);
+}
+
+/* workqueue */
+static void dostream(struct work_struct *work)
+{
+ struct usb_fpix *dev = container_of(work, struct usb_fpix, work_struct);
+ struct gspca_dev *gspca_dev = &dev->gspca_dev;
+ struct urb *urb = gspca_dev->urb[0];
+ u8 *data = urb->transfer_buffer;
+ int ret = 0;
+ int len;
+
+ /* synchronize with the main driver */
+ mutex_lock(&gspca_dev->usb_lock);
+ mutex_unlock(&gspca_dev->usb_lock);
+ PDEBUG(D_STREAM, "dostream started");
+
+ /* loop reading a frame */
+again:
+ while (gspca_dev->dev && gspca_dev->streaming) {
+#ifdef CONFIG_PM
+ if (gspca_dev->frozen)
+ break;
+#endif
+
+ /* request a frame */
+ mutex_lock(&gspca_dev->usb_lock);
+ ret = command(gspca_dev, 1);
+ mutex_unlock(&gspca_dev->usb_lock);
+ if (ret < 0)
+ break;
+#ifdef CONFIG_PM
+ if (gspca_dev->frozen)
+ break;
+#endif
+ if (!gspca_dev->dev || !gspca_dev->streaming)
+ break;
+
+ /* the frame comes in parts */
+ for (;;) {
+ ret = usb_bulk_msg(gspca_dev->dev,
+ urb->pipe,
+ data,
+ FPIX_MAX_TRANSFER,
+ &len, FPIX_TIMEOUT);
+ if (ret < 0) {
+ /* Most of the time we get a timeout
+ * error. Just restart. */
+ goto again;
+ }
+#ifdef CONFIG_PM
+ if (gspca_dev->frozen)
+ goto out;
+#endif
+ if (!gspca_dev->dev || !gspca_dev->streaming)
+ goto out;
+ if (len < FPIX_MAX_TRANSFER ||
+ (data[len - 2] == 0xff &&
+ data[len - 1] == 0xd9)) {
+
+ /* If the result is less than what was asked
+ * for, then it's the end of the
+ * frame. Sometimes the jpeg is not complete,
+ * but there's nothing we can do. We also end
+ * here if the the jpeg ends right at the end
+ * of the frame. */
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ data, len);
+ break;
+ }
+
+ /* got a partial image */
+ gspca_frame_add(gspca_dev,
+ gspca_dev->last_packet_type
+ == LAST_PACKET
+ ? FIRST_PACKET : INTER_PACKET,
+ data, len);
+ }
+
+ /* We must wait before trying reading the next
+ * frame. If we don't, or if the delay is too short,
+ * the camera will disconnect. */
+ msleep(NEXT_FRAME_DELAY);
+ }
+
+out:
+ PDEBUG(D_STREAM, "dostream stopped");
+}
+
+/* this function is called at probe time */
+static int sd_config(struct gspca_dev *gspca_dev,
+ const struct usb_device_id *id)
+{
+ struct usb_fpix *dev = (struct usb_fpix *) gspca_dev;
+ struct cam *cam = &gspca_dev->cam;
+
+ cam->cam_mode = fpix_mode;
+ cam->nmodes = 1;
+ cam->bulk = 1;
+ cam->bulk_size = FPIX_MAX_TRANSFER;
+
+ INIT_WORK(&dev->work_struct, dostream);
+
+ return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+ return 0;
+}
+
+/* start the camera */
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+ struct usb_fpix *dev = (struct usb_fpix *) gspca_dev;
+ int ret, len;
+
+ /* Init the device */
+ ret = command(gspca_dev, 0);
+ if (ret < 0) {
+ pr_err("init failed %d\n", ret);
+ return ret;
+ }
+
+ /* Read the result of the command. Ignore the result, for it
+ * varies with the device. */
+ ret = usb_bulk_msg(gspca_dev->dev,
+ gspca_dev->urb[0]->pipe,
+ gspca_dev->urb[0]->transfer_buffer,
+ FPIX_MAX_TRANSFER, &len,
+ FPIX_TIMEOUT);
+ if (ret < 0) {
+ pr_err("usb_bulk_msg failed %d\n", ret);
+ return ret;
+ }
+
+ /* Request a frame, but don't read it */
+ ret = command(gspca_dev, 1);
+ if (ret < 0) {
+ pr_err("frame request failed %d\n", ret);
+ return ret;
+ }
+
+ /* Again, reset bulk in endpoint */
+ usb_clear_halt(gspca_dev->dev, gspca_dev->urb[0]->pipe);
+
+ /* Start the workqueue function to do the streaming */
+ dev->work_thread = create_singlethread_workqueue(MODULE_NAME);
+ queue_work(dev->work_thread, &dev->work_struct);
+
+ return 0;
+}
+
+/* called on streamoff with alt==0 and on disconnect */
+/* the usb_lock is held at entry - restore on exit */
+static void sd_stop0(struct gspca_dev *gspca_dev)
+{
+ struct usb_fpix *dev = (struct usb_fpix *) gspca_dev;
+
+ /* wait for the work queue to terminate */
+ mutex_unlock(&gspca_dev->usb_lock);
+ destroy_workqueue(dev->work_thread);
+ mutex_lock(&gspca_dev->usb_lock);
+ dev->work_thread = NULL;
+}
+
+/* Table of supported USB devices */
+static const struct usb_device_id device_table[] = {
+ {USB_DEVICE(0x04cb, 0x0104)},
+ {USB_DEVICE(0x04cb, 0x0109)},
+ {USB_DEVICE(0x04cb, 0x010b)},
+ {USB_DEVICE(0x04cb, 0x010f)},
+ {USB_DEVICE(0x04cb, 0x0111)},
+ {USB_DEVICE(0x04cb, 0x0113)},
+ {USB_DEVICE(0x04cb, 0x0115)},
+ {USB_DEVICE(0x04cb, 0x0117)},
+ {USB_DEVICE(0x04cb, 0x0119)},
+ {USB_DEVICE(0x04cb, 0x011b)},
+ {USB_DEVICE(0x04cb, 0x011d)},
+ {USB_DEVICE(0x04cb, 0x0121)},
+ {USB_DEVICE(0x04cb, 0x0123)},
+ {USB_DEVICE(0x04cb, 0x0125)},
+ {USB_DEVICE(0x04cb, 0x0127)},
+ {USB_DEVICE(0x04cb, 0x0129)},
+ {USB_DEVICE(0x04cb, 0x012b)},
+ {USB_DEVICE(0x04cb, 0x012d)},
+ {USB_DEVICE(0x04cb, 0x012f)},
+ {USB_DEVICE(0x04cb, 0x0131)},
+ {USB_DEVICE(0x04cb, 0x013b)},
+ {USB_DEVICE(0x04cb, 0x013d)},
+ {USB_DEVICE(0x04cb, 0x013f)},
+ {}
+};
+
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+ .name = MODULE_NAME,
+ .config = sd_config,
+ .init = sd_init,
+ .start = sd_start,
+ .stop0 = sd_stop0,
+};
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ return gspca_dev_probe(intf, id,
+ &sd_desc,
+ sizeof(struct usb_fpix),
+ THIS_MODULE);
+}
+
+static struct usb_driver sd_driver = {
+ .name = MODULE_NAME,
+ .id_table = device_table,
+ .probe = sd_probe,
+ .disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+ .reset_resume = gspca_resume,
+#endif
+};
+
+module_usb_driver(sd_driver);