diff options
Diffstat (limited to 'drivers/media/video/Kconfig')
| -rw-r--r-- | drivers/media/video/Kconfig | 318 |
1 files changed, 81 insertions, 237 deletions
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index bdbc9d305419..ac16e815e275 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -83,7 +83,7 @@ config VIDEO_FIXED_MINOR_RANGES config VIDEO_HELPER_CHIPS_AUTO bool "Autoselect pertinent encoders/decoders and other helper chips" - default y + default y if !EMBEDDED ---help--- Most video cards may require additional modules to encode or decode audio/video standards. This option will autoselect @@ -517,19 +517,6 @@ config VIDEO_UPD64083 endmenu # encoder / decoder chips -config DISPLAY_DAVINCI_DM646X_EVM - tristate "DM646x EVM Video Display" - depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM - select VIDEOBUF_DMA_CONTIG - select VIDEO_DAVINCI_VPIF - select VIDEO_ADV7343 - select VIDEO_THS7303 - help - Support for DM6467 based display device. - - To compile this driver as a module, choose M here: the - module will be called vpif_display. - config VIDEO_SH_VOU tristate "SuperH VOU video output driver" depends on VIDEO_DEV && ARCH_SHMOBILE @@ -537,29 +524,22 @@ config VIDEO_SH_VOU help Support for the Video Output Unit (VOU) on SuperH SoCs. -config CAPTURE_DAVINCI_DM646X_EVM - tristate "DM646x EVM Video Capture" - depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM +config VIDEO_VIU + tristate "Freescale VIU Video Driver" + depends on VIDEO_V4L2 && PPC_MPC512x select VIDEOBUF_DMA_CONTIG - select VIDEO_DAVINCI_VPIF - help - Support for DM6467 based capture device. - - To compile this driver as a module, choose M here: the - module will be called vpif_capture. - -config VIDEO_DAVINCI_VPIF - tristate "DaVinci VPIF Driver" - depends on DISPLAY_DAVINCI_DM646X_EVM - help - Support for DaVinci VPIF Driver. + default y + ---help--- + Support for Freescale VIU video driver. This device captures + video data, or overlays video on DIU frame buffer. - To compile this driver as a module, choose M here: the - module will be called vpif. + Say Y here if you want to enable VIU device on MPC5121e Rev2+. + In doubt, say N. config VIDEO_VIVI tristate "Virtual Video Driver" - depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 && FONTS + depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 + depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE select FONT_8x16 select VIDEOBUF_VMALLOC default n @@ -570,66 +550,7 @@ config VIDEO_VIVI Say Y here if you want to test video apps or debug V4L devices. In doubt, say N. -config VIDEO_VPSS_SYSTEM - tristate "VPSS System module driver" - depends on ARCH_DAVINCI - help - Support for vpss system module for video driver - -config VIDEO_VPFE_CAPTURE - tristate "VPFE Video Capture Driver" - depends on VIDEO_V4L2 && ARCH_DAVINCI - select VIDEOBUF_DMA_CONTIG - help - Support for DMXXXX VPFE based frame grabber. This is the - common V4L2 module for following DMXXX SoCs from Texas - Instruments:- DM6446 & DM355. - - To compile this driver as a module, choose M here: the - module will be called vpfe-capture. - -config VIDEO_DM6446_CCDC - tristate "DM6446 CCDC HW module" - depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE - select VIDEO_VPSS_SYSTEM - default y - help - Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces - with decoder modules such as TVP5146 over BT656 or - sensor module such as MT9T001 over a raw interface. This - module configures the interface and CCDC/ISIF to do - video frame capture from slave decoders. - - To compile this driver as a module, choose M here: the - module will be called vpfe. - -config VIDEO_DM355_CCDC - tristate "DM355 CCDC HW module" - depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE - select VIDEO_VPSS_SYSTEM - default y - help - Enables DM355 CCD hw module. DM355 CCDC hw interfaces - with decoder modules such as TVP5146 over BT656 or - sensor module such as MT9T001 over a raw interface. This - module configures the interface and CCDC/ISIF to do - video frame capture from a slave decoders - - To compile this driver as a module, choose M here: the - module will be called vpfe. - -config VIDEO_ISIF - tristate "ISIF HW module" - depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE - select VIDEO_VPSS_SYSTEM - default y - help - Enables ISIF hw module. This is the hardware module for - configuring ISIF in VPFE to capture Raw Bayer RGB data from - a image sensor or YUV data from a YUV source. - - To compile this driver as a module, choose M here: the - module will be called vpfe. +source "drivers/media/video/davinci/Kconfig" source "drivers/media/video/omap/Kconfig" @@ -678,68 +599,8 @@ config VIDEO_W9966 Check out <file:Documentation/video4linux/w9966.txt> for more information. -config VIDEO_CPIA - tristate "CPiA Video For Linux (DEPRECATED)" - depends on VIDEO_V4L1 - default n - ---help--- - This driver is DEPRECATED please use the gspca cpia1 module - instead. Note that you need atleast version 0.6.4 of libv4l for - the cpia1 gspca module. - - This is the video4linux driver for cameras based on Vision's CPiA - (Colour Processor Interface ASIC), such as the Creative Labs Video - Blaster Webcam II. If you have one of these cameras, say Y here - and select parallel port and/or USB lowlevel support below, - otherwise say N. This will not work with the Creative Webcam III. - - Please read <file:Documentation/video4linux/README.cpia> for more - information. - - This driver is also available as a module (cpia). - -config VIDEO_CPIA_PP - tristate "CPiA Parallel Port Lowlevel Support" - depends on PARPORT_1284 && VIDEO_CPIA && PARPORT - help - This is the lowlevel parallel port support for cameras based on - Vision's CPiA (Colour Processor Interface ASIC), such as the - Creative Webcam II. If you have the parallel port version of one - of these cameras, say Y here, otherwise say N. It is also available - as a module (cpia_pp). - -config VIDEO_CPIA_USB - tristate "CPiA USB Lowlevel Support" - depends on VIDEO_CPIA && USB - help - This is the lowlevel USB support for cameras based on Vision's CPiA - (Colour Processor Interface ASIC), such as the Creative Webcam II. - If you have the USB version of one of these cameras, say Y here, - otherwise say N. This will not work with the Creative Webcam III. - It is also available as a module (cpia_usb). - source "drivers/media/video/cpia2/Kconfig" -config VIDEO_SAA5246A - tristate "SAA5246A, SAA5281 Teletext processor" - depends on I2C && VIDEO_V4L2 - help - Support for I2C bus based teletext using the SAA5246A or SAA5281 - chip. Useful only if you live in Europe. - - To compile this driver as a module, choose M here: the - module will be called saa5246a. - -config VIDEO_SAA5249 - tristate "SAA5249 Teletext processor" - depends on I2C && VIDEO_V4L2 - help - Support for I2C bus based teletext using the SAA5249 chip. At the - moment this is only useful on some European WinTV cards. - - To compile this driver as a module, choose M here: the - module will be called saa5249. - config VIDEO_VINO tristate "SGI Vino Video For Linux (EXPERIMENTAL)" depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2 @@ -748,14 +609,6 @@ config VIDEO_VINO Say Y here to build in support for the Vino video input system found on SGI Indy machines. -config VIDEO_STRADIS - tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)" - depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS - help - Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video - driver for PCI. There is a product page at - <http://www.stradis.com/>. - source "drivers/media/video/zoran/Kconfig" config VIDEO_MEYE @@ -853,6 +706,22 @@ config VIDEO_CAFE_CCIC CMOS camera controller. This is the controller found on first- generation OLPC systems. +config VIDEO_SR030PC30 + tristate "SR030PC30 VGA camera sensor support" + depends on I2C && VIDEO_V4L2 + ---help--- + This driver supports SR030PC30 VGA camera from Siliconfile + +config VIDEO_VIA_CAMERA + tristate "VIAFB camera controller support" + depends on FB_VIA + select VIDEOBUF_DMA_SG + select VIDEO_OV7670 + help + Driver support for the integrated camera controller in VIA + Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems + with ov7670 sensors. + config SOC_CAMERA tristate "SoC camera support" depends on VIDEO_V4L2 && HAS_DMA && I2C @@ -862,6 +731,12 @@ config SOC_CAMERA over a bus like PCI or USB. For example some i2c camera connected directly to the data bus of an SoC. +config SOC_CAMERA_IMX074 + tristate "imx074 support" + depends on SOC_CAMERA && I2C + help + This driver supports IMX074 cameras from Sony + config SOC_CAMERA_MT9M001 tristate "mt9m001 support" depends on SOC_CAMERA && I2C @@ -871,10 +746,11 @@ config SOC_CAMERA_MT9M001 and colour models. config SOC_CAMERA_MT9M111 - tristate "mt9m111 and mt9m112 support" + tristate "mt9m111, mt9m112 and mt9m131 support" depends on SOC_CAMERA && I2C help - This driver supports MT9M111 and MT9M112 cameras from Micron + This driver supports MT9M111, MT9M112 and MT9M131 cameras from + Micron/Aptina config SOC_CAMERA_MT9T031 tristate "mt9t031 support" @@ -913,6 +789,12 @@ config SOC_CAMERA_PLATFORM help This is a generic SoC camera platform driver, useful for testing +config SOC_CAMERA_OV6650 + tristate "ov6650 sensor support" + depends on SOC_CAMERA && I2C + ---help--- + This is a V4L2 SoC camera driver for the OmniVision OV6650 sensor + config SOC_CAMERA_OV772X tristate "ov772x camera support" depends on SOC_CAMERA && I2C @@ -955,6 +837,12 @@ config VIDEO_PXA27x ---help--- This is a v4l2 driver for the PXA27x Quick Capture Interface +config VIDEO_SH_MOBILE_CSI2 + tristate "SuperH Mobile MIPI CSI-2 Interface driver" + depends on VIDEO_DEV && SOC_CAMERA && HAVE_CLK + ---help--- + This is a v4l2 driver for the SuperH MIPI CSI-2 Interface + config VIDEO_SH_MOBILE_CEU tristate "SuperH Mobile CEU Interface driver" depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK @@ -962,6 +850,14 @@ config VIDEO_SH_MOBILE_CEU ---help--- This is a v4l2 driver for the SuperH Mobile CEU Interface +config VIDEO_OMAP1 + tristate "OMAP1 Camera Interface driver" + depends on VIDEO_DEV && ARCH_OMAP1 && SOC_CAMERA + select VIDEOBUF_DMA_CONTIG + select VIDEOBUF_DMA_SG + ---help--- + This is a v4l2 driver for the TI OMAP1 camera interface + config VIDEO_OMAP2 tristate "OMAP2 Camera Capture Interface driver" depends on VIDEO_DEV && ARCH_OMAP2 @@ -969,6 +865,19 @@ config VIDEO_OMAP2 ---help--- This is a v4l2 driver for the TI OMAP2 camera capture interface +config VIDEO_MX2_HOSTSUPPORT + bool + +config VIDEO_MX2 + tristate "i.MX27/i.MX25 Camera Sensor Interface driver" + depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || ARCH_MX25) + select VIDEOBUF_DMA_CONTIG + select VIDEO_MX2_HOSTSUPPORT + ---help--- + This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor + Interface + + # # USB Multimedia device configuration # @@ -1000,61 +909,6 @@ source "drivers/media/video/usbvideo/Kconfig" source "drivers/media/video/et61x251/Kconfig" -config VIDEO_OVCAMCHIP - tristate "OmniVision Camera Chip support (DEPRECATED)" - depends on I2C && VIDEO_V4L1 - default n - ---help--- - This driver is DEPRECATED please use the gspca ov519 module - instead. Note that for the ov511 / ov518 support of the gspca module - you need atleast version 0.6.0 of libv4l and for the w9968cf - atleast version 0.6.3 of libv4l. - - Support for the OmniVision OV6xxx and OV7xxx series of camera chips. - This driver is intended to be used with the ov511 and w9968cf USB - camera drivers. - - To compile this driver as a module, choose M here: the - module will be called ovcamchip. - -config USB_W9968CF - tristate "USB W996[87]CF JPEG Dual Mode Camera support (DEPRECATED)" - depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP - default n - ---help--- - This driver is DEPRECATED please use the gspca ov519 module - instead. Note that for the w9968cf support of the gspca module - you need atleast version 0.6.3 of libv4l. - - Say Y here if you want support for cameras based on OV681 or - Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips. - - This driver has an optional plugin, which is distributed as a - separate module only (released under GPL). It allows to use higher - resolutions and framerates, but cannot be included in the official - Linux kernel for performance purposes. - - See <file:Documentation/video4linux/w9968cf.txt> for more info. - - To compile this driver as a module, choose M here: the - module will be called w9968cf. - -config USB_OV511 - tristate "USB OV511 Camera support (DEPRECATED)" - depends on VIDEO_V4L1 - default n - ---help--- - This driver is DEPRECATED please use the gspca ov519 module - instead. Note that for the ov511 / ov518 support of the gspca module - you need atleast version 0.6.0 of libv4l. - - Say Y here if you want to connect this type of camera to your - computer's USB port. See <file:Documentation/video4linux/ov511.txt> - for more information and for a list of supported cameras. - - To compile this driver as a module, choose M here: the - module will be called ov511. - config USB_SE401 tristate "USB SE401 Camera support" depends on VIDEO_V4L1 @@ -1068,25 +922,6 @@ config USB_SE401 source "drivers/media/video/sn9c102/Kconfig" -config USB_STV680 - tristate "USB STV680 (Pencam) Camera support (DEPRECATED)" - depends on VIDEO_V4L1 - default n - ---help--- - This driver is DEPRECATED please use the gspca stv0680 module - instead. Note that for the gspca stv0680 module you need - atleast version 0.6.3 of libv4l. - - Say Y here if you want to connect this type of camera to your - computer's USB port. This includes the Pencam line of cameras. - See <file:Documentation/video4linux/stv680.txt> for more information - and for a list of supported cameras. - - To compile this driver as a module, choose M here: the - module will be called stv680. - -source "drivers/media/video/zc0301/Kconfig" - source "drivers/media/video/pwc/Kconfig" config USB_ZR364XX @@ -1111,7 +946,7 @@ config USB_STKWEBCAM Supported devices are typically found in some Asus laptops, with USB id 174f:a311 and 05e1:0501. Other Syntek cameras may be supported by the stk11xx driver, from which this is - derived, see http://stk11xx.sourceforge.net + derived, see <http://sourceforge.net/projects/syntekdriver/> To compile this driver as a module, choose M here: the module will be called stkwebcam. @@ -1150,4 +985,13 @@ config VIDEO_MEM2MEM_TESTDEV This is a virtual test device for the memory-to-memory driver framework. +config VIDEO_SAMSUNG_S5P_FIMC + tristate "Samsung S5P FIMC (video postprocessor) driver" + depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P + select VIDEOBUF_DMA_CONTIG + select V4L2_MEM2MEM_DEV + help + This is a v4l2 driver for the S5P camera interface + (video postprocessor) + endif # V4L_MEM2MEM_DRIVERS |