diff options
Diffstat (limited to 'drivers/media/video/em28xx/em28xx-cards.c')
| -rw-r--r-- | drivers/media/video/em28xx/em28xx-cards.c | 591 |
1 files changed, 504 insertions, 87 deletions
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 7c70738479dd..ed281f565945 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -49,6 +49,11 @@ static unsigned int disable_ir; module_param(disable_ir, int, 0444); MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); +static unsigned int disable_usb_speed_check; +module_param(disable_usb_speed_check, int, 0444); +MODULE_PARM_DESC(disable_usb_speed_check, + "override min bandwidth requirement of 480M bps"); + static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; module_param_array(card, int, NULL, 0444); MODULE_PARM_DESC(card, "card type"); @@ -104,6 +109,24 @@ static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { /* Board - EM2870 Kworld 355u Analog - No input analog */ +/* Board - EM2882 Kworld 315U digital */ +static struct em28xx_reg_seq em2882_kworld_315u_digital[] = { + {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {EM28XX_R08_GPIO, 0xfe, 0xff, 10}, + {EM2880_R04_GPO, 0x04, 0xff, 10}, + {EM2880_R04_GPO, 0x0c, 0xff, 10}, + {EM28XX_R08_GPIO, 0x7e, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = { + {EM2880_R04_GPO, 0x08, 0xff, 10}, + {EM2880_R04_GPO, 0x0c, 0xff, 10}, + {EM2880_R04_GPO, 0x08, 0xff, 10}, + {EM2880_R04_GPO, 0x0c, 0xff, 10}, + { -1, -1, -1, -1}, +}; + static struct em28xx_reg_seq kworld_330u_analog[] = { {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x00, 0xff, 10}, @@ -116,6 +139,38 @@ static struct em28xx_reg_seq kworld_330u_digital[] = { { -1, -1, -1, -1}, }; +/* Evga inDtube + GPIO0 - Enable digital power (s5h1409) - low to enable + GPIO1 - Enable analog power (tvp5150/emp202) - low to enable + GPIO4 - xc3028 reset + GOP3 - s5h1409 reset + */ +static struct em28xx_reg_seq evga_indtube_analog[] = { + {EM28XX_R08_GPIO, 0x79, 0xff, 60}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq evga_indtube_digital[] = { + {EM28XX_R08_GPIO, 0x7a, 0xff, 1}, + {EM2880_R04_GPO, 0x04, 0xff, 10}, + {EM2880_R04_GPO, 0x0c, 0xff, 1}, + { -1, -1, -1, -1}, +}; + +/* Pinnacle Hybrid Pro eb1a:2881 */ +static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { + {EM28XX_R08_GPIO, 0xfd, ~EM_GPIO_4, 10}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = { + {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */ + {EM2880_R04_GPO, 0x0c, 0xff, 1}, + { -1, -1, -1, -1}, +}; + + /* Callback for the most boards */ static struct em28xx_reg_seq default_tuner_gpio[] = { {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10}, @@ -140,18 +195,37 @@ static struct em28xx_reg_seq compro_mute_gpio[] = { { -1, -1, -1, -1}, }; +/* Terratec AV350 */ +static struct em28xx_reg_seq terratec_av350_mute_gpio[] = { + {EM28XX_R08_GPIO, 0xff, 0x7f, 10}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { + {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq silvercrest_reg_seq[] = { + {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {EM28XX_R08_GPIO, 0x01, 0xf7, 10}, + { -1, -1, -1, -1}, +}; + /* * Board definitions */ struct em28xx_board em28xx_boards[] = { [EM2750_BOARD_UNKNOWN] = { - .name = "Unknown EM2750/EM2751 webcam grabber", - .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, - .tuner_type = TUNER_ABSENT, /* This is a webcam */ + .name = "EM2710/EM2750/EM2751 webcam grabber", + .xclk = EM28XX_XCLK_FREQUENCY_20MHZ, + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, .amux = EM28XX_AMUX_VIDEO, + .gpio = silvercrest_reg_seq, } }, }, [EM2800_BOARD_UNKNOWN] = { @@ -173,13 +247,15 @@ struct em28xx_board em28xx_boards[] = { [EM2820_BOARD_UNKNOWN] = { .name = "Unknown EM2750/28xx video grabber", .tuner_type = TUNER_ABSENT, + .is_webcam = 1, /* To enable sensor probe */ }, [EM2750_BOARD_DLCW_130] = { /* Beijing Huaqi Information Digital Technology Co., Ltd */ .name = "Huaqi DLCW-130", .valid = EM28XX_BOARD_NOT_VALIDATED, .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, - .tuner_type = TUNER_ABSENT, /* This is a webcam */ + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, @@ -380,11 +456,23 @@ struct em28xx_board em28xx_boards[] = { [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = { .name = "Videology 20K14XUSB USB2.0", .valid = EM28XX_BOARD_NOT_VALIDATED, - .tuner_type = TUNER_ABSENT, /* This is a webcam */ + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, + .input = { { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = 0, + .amux = EM28XX_AMUX_VIDEO, + } }, + }, + [EM2820_BOARD_SILVERCREST_WEBCAM] = { + .name = "Silvercrest Webcam 1.3mpix", + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, .amux = EM28XX_AMUX_VIDEO, + .gpio = silvercrest_reg_seq, } }, }, [EM2821_BOARD_SUPERCOMP_USB_2] = { @@ -428,7 +516,8 @@ struct em28xx_board em28xx_boards[] = { /* Beijing Huaqi Information Digital Technology Co., Ltd */ .name = "NetGMBH Cam", .valid = EM28XX_BOARD_NOT_VALIDATED, - .tuner_type = TUNER_ABSENT, /* This is a webcam */ + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, @@ -533,22 +622,27 @@ struct em28xx_board em28xx_boards[] = { }, [EM2861_BOARD_PLEXTOR_PX_TV100U] = { .name = "Plextor ConvertX PX-TV100U", - .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_TNF_5335MF, + .xclk = EM28XX_XCLK_I2S_MSB_TIMING | + EM28XX_XCLK_FREQUENCY_12MHZ, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_TVP5150, + .has_msp34xx = 1, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, + .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, + .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, + .gpio = pinnacle_hybrid_pro_analog, } }, }, @@ -775,7 +869,7 @@ struct em28xx_board em28xx_boards[] = { .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .has_dvb = 1, - .dvb_gpio = default_analog, + .dvb_gpio = default_digital, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, @@ -992,16 +1086,17 @@ struct em28xx_board em28xx_boards[] = { .amux = EM28XX_AMUX_LINE_IN, } }, }, - [EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA] = { - .name = "PointNix Intra-Oral Camera", + [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = { + .name = "EM2860/SAA711X Reference Design", .has_snapshot_button = 1, - .tda9887_conf = TDA9887_PRESENT, .tuner_type = TUNER_ABSENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, - .amux = EM28XX_AMUX_VIDEO, + }, { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = SAA7115_COMPOSITE0, } }, }, [EM2880_BOARD_MSI_DIGIVOX_AD] = { @@ -1095,6 +1190,63 @@ struct em28xx_board em28xx_boards[] = { .gpio = default_analog, } }, }, + [EM2882_BOARD_KWORLD_ATSC_315U] = { + .name = "KWorld ATSC 315U HDTV TV Box", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_THOMSON_DTT761X, + .tuner_gpio = em2882_kworld_315u_tuner_gpio, + .tda9887_conf = TDA9887_PRESENT, + .decoder = EM28XX_SAA711X, + .has_dvb = 1, + .dvb_gpio = em2882_kworld_315u_digital, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, + /* Analog mode - still not ready */ + /*.input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE2, + .amux = EM28XX_AMUX_VIDEO, + .gpio = em2882_kworld_315u_analog, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, + }, { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = em2882_kworld_315u_analog1, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = em2882_kworld_315u_analog1, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, + } }, */ + }, + [EM2880_BOARD_EMPIRE_DUAL_TV] = { + .name = "Empire dual TV", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .has_dvb = 1, + .dvb_gpio = default_digital, + .mts_firmware = 1, + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = default_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = default_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = default_analog, + } }, + }, [EM2881_BOARD_DNT_DA2_HYBRID] = { .name = "DNT DA2 Hybrid", .valid = EM28XX_BOARD_NOT_VALIDATED, @@ -1120,25 +1272,26 @@ struct em28xx_board em28xx_boards[] = { }, [EM2881_BOARD_PINNACLE_HYBRID_PRO] = { .name = "Pinnacle Hybrid Pro", - .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, + .has_dvb = 1, + .dvb_gpio = pinnacle_hybrid_pro_digital, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, - .gpio = default_analog, + .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, - .gpio = default_analog, + .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, - .gpio = default_analog, + .gpio = pinnacle_hybrid_pro_analog, } }, }, [EM2882_BOARD_PINNACLE_HYBRID_PRO] = { @@ -1322,6 +1475,69 @@ struct em28xx_board em28xx_boards[] = { .amux = EM28XX_AMUX_VIDEO, } }, }, + [EM2860_BOARD_TERRATEC_GRABBY] = { + .name = "Terratec Grabby", + .vchannels = 2, + .tuner_type = TUNER_ABSENT, + .decoder = EM28XX_SAA711X, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .input = { { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO2, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_VIDEO2, + } }, + }, + [EM2860_BOARD_TERRATEC_AV350] = { + .name = "Terratec AV350", + .vchannels = 2, + .tuner_type = TUNER_ABSENT, + .decoder = EM28XX_TVP5150, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .mute_gpio = terratec_av350_mute_gpio, + .input = { { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AUDIO_SRC_LINE, + .gpio = terratec_av350_unmute_gpio, + + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AUDIO_SRC_LINE, + .gpio = terratec_av350_unmute_gpio, + } }, + }, + [EM2882_BOARD_EVGA_INDTUBE] = { + .name = "Evga inDtube", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .decoder = EM28XX_TVP5150, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ + .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = evga_indtube_digital, + .ir_codes = ir_codes_evga_indtube, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = evga_indtube_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = evga_indtube_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = evga_indtube_analog, + } }, + }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); @@ -1333,6 +1549,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2750_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2800), .driver_info = EM2800_BOARD_UNKNOWN }, + { USB_DEVICE(0xeb1a, 0x2710), + .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2820), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2821), @@ -1355,6 +1573,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2880_BOARD_KWORLD_DVB_305U }, { USB_DEVICE(0xeb1a, 0xe310), .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD }, + { USB_DEVICE(0xeb1a, 0xa313), + .driver_info = EM2882_BOARD_KWORLD_ATSC_315U }, { USB_DEVICE(0xeb1a, 0xa316), .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, { USB_DEVICE(0xeb1a, 0xe320), @@ -1385,6 +1605,10 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2870_BOARD_TERRATEC_XS }, { USB_DEVICE(0x0ccd, 0x0047), .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS }, + { USB_DEVICE(0x0ccd, 0x0084), + .driver_info = EM2860_BOARD_TERRATEC_AV350 }, + { USB_DEVICE(0x0ccd, 0x0096), + .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, { USB_DEVICE(0x185b, 0x2870), .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE }, { USB_DEVICE(0x185b, 0x2041), @@ -1437,13 +1661,16 @@ static struct em28xx_hash_table em28xx_eeprom_hash[] = { {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF}, {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, + {0x9567eb1a, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, + {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, + {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028}, }; /* I2C devicelist hash table for devices with generic USB IDs */ static struct em28xx_hash_table em28xx_i2c_hash[] = { {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC}, {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, - {0x1ba50080, EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA, TUNER_ABSENT}, + {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT}, {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC}, }; @@ -1459,6 +1686,11 @@ static unsigned short tvp5150_addrs[] = { I2C_CLIENT_END }; +static unsigned short mt9v011_addrs[] = { + 0xba >> 1, + I2C_CLIENT_END +}; + static unsigned short msp3400_addrs[] = { 0x80 >> 1, 0x88 >> 1, @@ -1498,65 +1730,114 @@ static inline void em28xx_set_model(struct em28xx *dev) EM28XX_I2C_FREQ_100_KHZ; } -/* Since em28xx_pre_card_setup() requires a proper dev->model, - * this won't work for boards with generic PCI IDs +/* FIXME: Should be replaced by a proper mt9m001 driver */ +static int em28xx_initialize_mt9m001(struct em28xx *dev) +{ + int i; + unsigned char regs[][3] = { + { 0x0d, 0x00, 0x01, }, + { 0x0d, 0x00, 0x00, }, + { 0x04, 0x05, 0x00, }, /* hres = 1280 */ + { 0x03, 0x04, 0x00, }, /* vres = 1024 */ + { 0x20, 0x11, 0x00, }, + { 0x06, 0x00, 0x10, }, + { 0x2b, 0x00, 0x24, }, + { 0x2e, 0x00, 0x24, }, + { 0x35, 0x00, 0x24, }, + { 0x2d, 0x00, 0x20, }, + { 0x2c, 0x00, 0x20, }, + { 0x09, 0x0a, 0xd4, }, + { 0x35, 0x00, 0x57, }, + }; + + for (i = 0; i < ARRAY_SIZE(regs); i++) + i2c_master_send(&dev->i2c_client, ®s[i][0], 3); + + return 0; +} + +/* HINT method: webcam I2C chips + * + * This method work for webcams with Micron sensors */ -void em28xx_pre_card_setup(struct em28xx *dev) +static int em28xx_hint_sensor(struct em28xx *dev) { int rc; + char *sensor_name; + unsigned char cmd; + __be16 version_be; + u16 version; + + /* Micron sensor detection */ + dev->i2c_client.addr = 0xba >> 1; + cmd = 0; + i2c_master_send(&dev->i2c_client, &cmd, 1); + rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2); + if (rc != 2) + return -EINVAL; + + version = be16_to_cpu(version_be); + switch (version) { + case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */ + case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */ + dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; + em28xx_set_model(dev); + + sensor_name = "mt9v011"; + dev->em28xx_sensor = EM28XX_MT9V011; + dev->sensor_xres = 640; + dev->sensor_yres = 480; + /* + * FIXME: mt9v011 uses I2S speed as xtal clk - at least with + * the Silvercrest cam I have here for testing - for higher + * resolutions, a high clock cause horizontal artifacts, so we + * need to use a lower xclk frequency. + * Yet, it would be possible to adjust xclk depending on the + * desired resolution, since this affects directly the + * frame rate. + */ + dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ; + dev->sensor_xtal = 4300000; - em28xx_set_model(dev); - - em28xx_info("Identified as %s (card=%d)\n", - dev->board.name, dev->model); + /* probably means GRGB 16 bit bayer */ + dev->vinmode = 0x0d; + dev->vinctl = 0x00; - /* Set the default GPO/GPIO for legacy devices */ - dev->reg_gpo_num = EM2880_R04_GPO; - dev->reg_gpio_num = EM28XX_R08_GPIO; + break; + case 0x8431: + dev->model = EM2750_BOARD_UNKNOWN; + em28xx_set_model(dev); - dev->wait_after_write = 5; + sensor_name = "mt9m001"; + dev->em28xx_sensor = EM28XX_MT9M001; + em28xx_initialize_mt9m001(dev); + dev->sensor_xres = 1280; + dev->sensor_yres = 1024; - /* Based on the Chip ID, set the device configuration */ - rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); - if (rc > 0) { - dev->chip_id = rc; + /* probably means BGGR 16 bit bayer */ + dev->vinmode = 0x0c; + dev->vinctl = 0x00; - switch (dev->chip_id) { - case CHIP_ID_EM2750: - em28xx_info("chip ID is em2750\n"); - break; - case CHIP_ID_EM2820: - em28xx_info("chip ID is em2820\n"); - break; - case CHIP_ID_EM2840: - em28xx_info("chip ID is em2840\n"); - break; - case CHIP_ID_EM2860: - em28xx_info("chip ID is em2860\n"); - break; - case CHIP_ID_EM2870: - em28xx_info("chip ID is em2870\n"); - dev->wait_after_write = 0; - break; - case CHIP_ID_EM2874: - em28xx_info("chip ID is em2874\n"); - dev->reg_gpio_num = EM2874_R80_GPIO; - dev->wait_after_write = 0; - break; - case CHIP_ID_EM2883: - em28xx_info("chip ID is em2882/em2883\n"); - dev->wait_after_write = 0; - break; - default: - em28xx_info("em28xx chip ID = %d\n", dev->chip_id); - } + break; + default: + printk("Unknown Micron Sensor 0x%04x\n", be16_to_cpu(version)); + return -EINVAL; } - /* Prepopulate cached GPO register content */ - rc = em28xx_read_reg(dev, dev->reg_gpo_num); - if (rc >= 0) - dev->reg_gpo = rc; + /* Setup webcam defaults */ + em28xx_pre_card_setup(dev); + + em28xx_errdev("Sensor is %s, using model %s entry.\n", + sensor_name, em28xx_boards[dev->model].name); + return 0; +} + +/* Since em28xx_pre_card_setup() requires a proper dev->model, + * this won't work for boards with generic PCI IDs + */ +void em28xx_pre_card_setup(struct em28xx *dev) +{ /* Set the initial XCLK and I2C clock values based on the board definition */ em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f); @@ -1566,9 +1847,8 @@ void em28xx_pre_card_setup(struct em28xx *dev) /* request some modules */ switch (dev->model) { case EM2861_BOARD_PLEXTOR_PX_TV100U: - /* FIXME guess */ - /* Turn on analog audio output */ - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); + /* Sets the msp34xx I2S speed */ + dev->i2s_speed = 2048000; break; case EM2861_BOARD_KWORLD_PVRTV_300U: case EM2880_BOARD_KWORLD_DVB_305U: @@ -1619,6 +1899,17 @@ void em28xx_pre_card_setup(struct em28xx *dev) em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); break; + case EM2882_BOARD_KWORLD_ATSC_315U: + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff); + msleep(10); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe); + msleep(10); + em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); + msleep(10); + em28xx_write_reg(dev, EM2880_R04_GPO, 0x08); + msleep(10); + break; + case EM2860_BOARD_KAIOMY_TVNPC_U2: em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1); em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); @@ -1664,10 +1955,12 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) ctl->mts = em28xx_boards[dev->model].mts_firmware; switch (dev->model) { + case EM2880_BOARD_EMPIRE_DUAL_TV: case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: ctl->demod = XC3028_FE_ZARLINK456; break; case EM2880_BOARD_TERRATEC_HYBRID_XS: + case EM2881_BOARD_PINNACLE_HYBRID_PRO: ctl->demod = XC3028_FE_ZARLINK456; break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: @@ -1688,6 +1981,10 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) ctl->demod = XC3028_FE_CHINA; ctl->fname = XC2028_DEFAULT_FIRMWARE; break; + case EM2882_BOARD_EVGA_INDTUBE: + ctl->demod = XC3028_FE_CHINA; + ctl->fname = XC3028L_DEFAULT_FIRMWARE; + break; default: ctl->demod = XC3028_FE_OREN538; } @@ -1835,12 +2132,20 @@ static int em28xx_hint_board(struct em28xx *dev) } /* ----------------------------------------------------------------------- */ -void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir) +void em28xx_register_i2c_ir(struct em28xx *dev) { - if (disable_ir) { - ir->get_key = NULL; - return ; - } + struct i2c_board_info info; + struct IR_i2c_init_data init_data; + const unsigned short addr_list[] = { + 0x30, 0x47, I2C_CLIENT_END + }; + + if (disable_ir) + return; + + memset(&info, 0, sizeof(struct i2c_board_info)); + memset(&init_data, 0, sizeof(struct IR_i2c_init_data)); + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); /* detect & configure */ switch (dev->model) { @@ -1850,22 +2155,19 @@ void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir) break; case (EM2800_BOARD_TERRATEC_CINERGY_200): case (EM2820_BOARD_TERRATEC_CINERGY_250): - ir->ir_codes = ir_codes_em_terratec; - ir->get_key = em28xx_get_key_terratec; - snprintf(ir->c.name, sizeof(ir->c.name), - "i2c IR (EM28XX Terratec)"); + init_data.ir_codes = ir_codes_em_terratec; + init_data.get_key = em28xx_get_key_terratec; + init_data.name = "i2c IR (EM28XX Terratec)"; break; case (EM2820_BOARD_PINNACLE_USB_2): - ir->ir_codes = ir_codes_pinnacle_grey; - ir->get_key = em28xx_get_key_pinnacle_usb_grey; - snprintf(ir->c.name, sizeof(ir->c.name), - "i2c IR (EM28XX Pinnacle PCTV)"); + init_data.ir_codes = ir_codes_pinnacle_grey; + init_data.get_key = em28xx_get_key_pinnacle_usb_grey; + init_data.name = "i2c IR (EM28XX Pinnacle PCTV)"; break; case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2): - ir->ir_codes = ir_codes_hauppauge_new; - ir->get_key = em28xx_get_key_em_haup; - snprintf(ir->c.name, sizeof(ir->c.name), - "i2c IR (EM2840 Hauppauge)"); + init_data.ir_codes = ir_codes_hauppauge_new; + init_data.get_key = em28xx_get_key_em_haup; + init_data.name = "i2c IR (EM2840 Hauppauge)"; break; case (EM2820_BOARD_MSI_VOX_USB_2): break; @@ -1876,16 +2178,36 @@ void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir) case (EM2800_BOARD_GRABBEEX_USB2800): break; } + + if (init_data.name) + info.platform_data = &init_data; + i2c_new_probed_device(&dev->i2c_adap, &info, addr_list); } void em28xx_card_setup(struct em28xx *dev) { - em28xx_set_model(dev); + /* + * If the device can be a webcam, seek for a sensor. + * If sensor is not found, then it isn't a webcam. + */ + if (dev->board.is_webcam) { + if (em28xx_hint_sensor(dev) < 0) + dev->board.is_webcam = 0; + else + dev->progressive = 1; + } else + em28xx_set_model(dev); + + em28xx_info("Identified as %s (card=%d)\n", + dev->board.name, dev->model); dev->tuner_type = em28xx_boards[dev->model].tuner_type; if (em28xx_boards[dev->model].tuner_addr) dev->tuner_addr = em28xx_boards[dev->model].tuner_addr; + if (em28xx_boards[dev->model].tda9887_conf) + dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf; + /* request some modules */ switch (dev->model) { case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: @@ -1915,6 +2237,12 @@ void em28xx_card_setup(struct em28xx *dev) #endif break; } + case EM2882_BOARD_KWORLD_ATSC_315U: + em28xx_write_reg(dev, 0x0d, 0x42); + msleep(10); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); + msleep(10); + break; case EM2820_BOARD_KWORLD_PVRTV2800RF: /* GPIO enables sound on KWORLD PVR TV 2800RF */ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9); @@ -1937,6 +2265,13 @@ void em28xx_card_setup(struct em28xx *dev) case EM2880_BOARD_MSI_DIGIVOX_AD: if (!em28xx_hint_board(dev)) em28xx_set_model(dev); + + /* In cases where we had to use a board hint, the call to + em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, + so make the call now so the analog GPIOs are set properly + before probing the i2c bus. */ + em28xx_gpio_set(dev, dev->board.tuner_gpio); + em28xx_set_mode(dev, EM28XX_ANALOG_MODE); break; } @@ -1969,6 +2304,15 @@ void em28xx_card_setup(struct em28xx *dev) v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tvp5150", "tvp5150", tvp5150_addrs); + if (dev->em28xx_sensor == EM28XX_MT9V011) { + struct v4l2_subdev *sd; + + sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, + &dev->i2c_adap, "mt9v011", "mt9v011", mt9v011_addrs); + v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal); + } + + if (dev->board.adecoder == EM28XX_TVAUDIO) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tvaudio", "tvaudio", dev->board.tvaudio_addr); @@ -2068,7 +2412,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, int minor) { struct em28xx *dev = *devhandle; - int retval = -ENOMEM; + int retval; int errCode; dev->udev = udev; @@ -2085,6 +2429,58 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, dev->em28xx_read_reg_req = em28xx_read_reg_req; dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800; + em28xx_set_model(dev); + + /* Set the default GPO/GPIO for legacy devices */ + dev->reg_gpo_num = EM2880_R04_GPO; + dev->reg_gpio_num = EM28XX_R08_GPIO; + + dev->wait_after_write = 5; + + /* Based on the Chip ID, set the device configuration */ + retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); + if (retval > 0) { + dev->chip_id = retval; + + switch (dev->chip_id) { + case CHIP_ID_EM2710: + em28xx_info("chip ID is em2710\n"); + break; + case CHIP_ID_EM2750: + em28xx_info("chip ID is em2750\n"); + break; + case CHIP_ID_EM2820: + em28xx_info("chip ID is em2820 (or em2710)\n"); + break; + case CHIP_ID_EM2840: + em28xx_info("chip ID is em2840\n"); + break; + case CHIP_ID_EM2860: + em28xx_info("chip ID is em2860\n"); + break; + case CHIP_ID_EM2870: + em28xx_info("chip ID is em2870\n"); + dev->wait_after_write = 0; + break; + case CHIP_ID_EM2874: + em28xx_info("chip ID is em2874\n"); + dev->reg_gpio_num = EM2874_R80_GPIO; + dev->wait_after_write = 0; + break; + case CHIP_ID_EM2883: + em28xx_info("chip ID is em2882/em2883\n"); + dev->wait_after_write = 0; + break; + default: + em28xx_info("em28xx chip ID = %d\n", dev->chip_id); + } + } + + /* Prepopulate cached GPO register content */ + retval = em28xx_read_reg(dev, dev->reg_gpo_num); + if (retval >= 0) + dev->reg_gpo = retval; + em28xx_pre_card_setup(dev); if (!dev->board.is_em2800) { @@ -2113,6 +2509,12 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, return errCode; } + /* + * Default format, used for tvp5150 or saa711x output formats + */ + dev->vinmode = 0x10; + dev->vinctl = 0x11; + /* Do board specific init and eeprom reading */ em28xx_card_setup(dev); @@ -2279,6 +2681,20 @@ static int em28xx_usb_probe(struct usb_interface *interface, ifnum, interface->altsetting->desc.bInterfaceNumber); + /* + * Make sure we have 480 Mbps of bandwidth, otherwise things like + * video stream wouldn't likely work, since 12 Mbps is generally + * not enough even for most Digital TV streams. + */ + if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { + printk(DRIVER_NAME ": Device initialization failed.\n"); + printk(DRIVER_NAME ": Device must be connected to a high-speed" + " USB 2.0 port.\n"); + em28xx_devused &= ~(1<<nr); + retval = -ENODEV; + goto err; + } + if (nr >= EM28XX_MAXBOARDS) { printk(DRIVER_NAME ": Supports only %i em28xx boards.\n", EM28XX_MAXBOARDS); @@ -2339,6 +2755,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, retval = em28xx_init_dev(&dev, udev, interface, nr); if (retval) { em28xx_devused &= ~(1<<dev->devno); + mutex_unlock(&dev->lock); kfree(dev); goto err; } |