summaryrefslogtreecommitdiffstats
path: root/drivers/message/fusion/mptbase.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/message/fusion/mptbase.c')
-rw-r--r--drivers/message/fusion/mptbase.c5946
1 files changed, 5946 insertions, 0 deletions
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
new file mode 100644
index 000000000000..942cc1c2a186
--- /dev/null
+++ b/drivers/message/fusion/mptbase.c
@@ -0,0 +1,5946 @@
+/*
+ * linux/drivers/message/fusion/mptbase.c
+ * High performance SCSI + LAN / Fibre Channel device drivers.
+ * This is the Fusion MPT base driver which supports multiple
+ * (SCSI + LAN) specialized protocol drivers.
+ * For use with PCI chip/adapter(s):
+ * LSIFC9xx/LSI409xx Fibre Channel
+ * running LSI Logic Fusion MPT (Message Passing Technology) firmware.
+ *
+ * Credits:
+ * There are lots of people not mentioned below that deserve credit
+ * and thanks but won't get it here - sorry in advance that you
+ * got overlooked.
+ *
+ * This driver would not exist if not for Alan Cox's development
+ * of the linux i2o driver.
+ *
+ * A special thanks to Noah Romer (LSI Logic) for tons of work
+ * and tough debugging on the LAN driver, especially early on;-)
+ * And to Roger Hickerson (LSI Logic) for tirelessly supporting
+ * this driver project.
+ *
+ * A special thanks to Pamela Delaney (LSI Logic) for tons of work
+ * and countless enhancements while adding support for the 1030
+ * chip family. Pam has been instrumental in the development of
+ * of the 2.xx.xx series fusion drivers, and her contributions are
+ * far too numerous to hope to list in one place.
+ *
+ * All manner of help from Stephen Shirron (LSI Logic):
+ * low-level FC analysis, debug + various fixes in FCxx firmware,
+ * initial port to alpha platform, various driver code optimizations,
+ * being a faithful sounding board on all sorts of issues & ideas,
+ * etc.
+ *
+ * A huge debt of gratitude is owed to David S. Miller (DaveM)
+ * for fixing much of the stupid and broken stuff in the early
+ * driver while porting to sparc64 platform. THANK YOU!
+ *
+ * Special thanks goes to the I2O LAN driver people at the
+ * University of Helsinki, who, unbeknownst to them, provided
+ * the inspiration and initial structure for this driver.
+ *
+ * A really huge debt of gratitude is owed to Eddie C. Dost
+ * for gobs of hard work fixing and optimizing LAN code.
+ * THANK YOU!
+ *
+ * Copyright (c) 1999-2004 LSI Logic Corporation
+ * Originally By: Steven J. Ralston
+ * (mailto:sjralston1@netscape.net)
+ * (mailto:mpt_linux_developer@lsil.com)
+ *
+ * $Id: mptbase.c,v 1.126 2002/12/16 15:28:45 pdelaney Exp $
+ */
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; version 2 of the License.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ NO WARRANTY
+ THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ solely responsible for determining the appropriateness of using and
+ distributing the Program and assumes all risks associated with its
+ exercise of rights under this Agreement, including but not limited to
+ the risks and costs of program errors, damage to or loss of data,
+ programs or equipment, and unavailability or interruption of operations.
+
+ DISCLAIMER OF LIABILITY
+ NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h> /* needed for in_interrupt() proto */
+#include <asm/io.h>
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
+#ifdef __sparc__
+#include <asm/irq.h> /* needed for __irq_itoa() proto */
+#endif
+
+#include "mptbase.h"
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+#define my_NAME "Fusion MPT base driver"
+#define my_VERSION MPT_LINUX_VERSION_COMMON
+#define MYNAM "mptbase"
+
+MODULE_AUTHOR(MODULEAUTHOR);
+MODULE_DESCRIPTION(my_NAME);
+MODULE_LICENSE("GPL");
+
+/*
+ * cmd line parameters
+ */
+#ifdef MFCNT
+static int mfcounter = 0;
+#define PRINT_MF_COUNT 20000
+#endif
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * Public data...
+ */
+int mpt_lan_index = -1;
+int mpt_stm_index = -1;
+
+struct proc_dir_entry *mpt_proc_root_dir;
+
+#define WHOINIT_UNKNOWN 0xAA
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * Private data...
+ */
+ /* Adapter link list */
+LIST_HEAD(ioc_list);
+ /* Callback lookup table */
+static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS];
+ /* Protocol driver class lookup table */
+static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS];
+ /* Event handler lookup table */
+static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS];
+ /* Reset handler lookup table */
+static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
+static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
+
+static int mpt_base_index = -1;
+static int last_drv_idx = -1;
+
+static DECLARE_WAIT_QUEUE_HEAD(mpt_waitq);
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * Forward protos...
+ */
+static irqreturn_t mpt_interrupt(int irq, void *bus_id, struct pt_regs *r);
+static int mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply);
+static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
+ u32 *req, int replyBytes, u16 *u16reply, int maxwait,
+ int sleepFlag);
+static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag);
+static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev);
+static void mpt_adapter_disable(MPT_ADAPTER *ioc);
+static void mpt_adapter_dispose(MPT_ADAPTER *ioc);
+
+static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc);
+static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag);
+//static u32 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked);
+static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason);
+static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
+static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag);
+static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
+static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag);
+static int mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag);
+static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
+static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
+static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag);
+static int PrimeIocFifos(MPT_ADAPTER *ioc);
+static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
+static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
+static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
+static int GetLanConfigPages(MPT_ADAPTER *ioc);
+static int GetFcPortPage0(MPT_ADAPTER *ioc, int portnum);
+static int GetIoUnitPage2(MPT_ADAPTER *ioc);
+static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
+static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
+static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
+static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
+static void mpt_timer_expired(unsigned long data);
+static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch);
+static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
+
+#ifdef CONFIG_PROC_FS
+static int procmpt_summary_read(char *buf, char **start, off_t offset,
+ int request, int *eof, void *data);
+static int procmpt_version_read(char *buf, char **start, off_t offset,
+ int request, int *eof, void *data);
+static int procmpt_iocinfo_read(char *buf, char **start, off_t offset,
+ int request, int *eof, void *data);
+#endif
+static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
+
+//int mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag);
+static int ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply, int *evHandlers);
+static void mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
+static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
+static void mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info);
+
+/* module entry point */
+static int __devinit mptbase_probe (struct pci_dev *, const struct pci_device_id *);
+static void __devexit mptbase_remove(struct pci_dev *);
+static void mptbase_shutdown(struct device * );
+static int __init fusion_init (void);
+static void __exit fusion_exit (void);
+
+/****************************************************************************
+ * Supported hardware
+ */
+
+static struct pci_device_id mptbase_pci_table[] = {
+ { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC909,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC929,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC919,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC929X,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC919X,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1030,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_1030_53C1035,
+ PCI_ANY_ID, PCI_ANY_ID },
+ {0} /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(pci, mptbase_pci_table);
+
+#define CHIPREG_READ32(addr) readl_relaxed(addr)
+#define CHIPREG_READ32_dmasync(addr) readl(addr)
+#define CHIPREG_WRITE32(addr,val) writel(val, addr)
+#define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr)
+#define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr)
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
+ * @irq: irq number (not used)
+ * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
+ * @r: pt_regs pointer (not used)
+ *
+ * This routine is registered via the request_irq() kernel API call,
+ * and handles all interrupts generated from a specific MPT adapter
+ * (also referred to as a IO Controller or IOC).
+ * This routine must clear the interrupt from the adapter and does
+ * so by reading the reply FIFO. Multiple replies may be processed
+ * per single call to this routine; up to MPT_MAX_REPLIES_PER_ISR
+ * which is currently set to 32 in mptbase.h.
+ *
+ * This routine handles register-level access of the adapter but
+ * dispatches (calls) a protocol-specific callback routine to handle
+ * the protocol-specific details of the MPT request completion.
+ */
+static irqreturn_t
+mpt_interrupt(int irq, void *bus_id, struct pt_regs *r)
+{
+ MPT_ADAPTER *ioc;
+ MPT_FRAME_HDR *mf;
+ MPT_FRAME_HDR *mr;
+ u32 pa;
+ int req_idx;
+ int cb_idx;
+ int type;
+ int freeme;
+
+ ioc = (MPT_ADAPTER *)bus_id;
+
+ /*
+ * Drain the reply FIFO!
+ *
+ * NOTES: I've seen up to 10 replies processed in this loop, so far...
+ * Update: I've seen up to 9182 replies processed in this loop! ??
+ * Update: Limit ourselves to processing max of N replies
+ * (bottom of loop).
+ */
+ while (1) {
+
+ if ((pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo)) == 0xFFFFFFFF)
+ return IRQ_HANDLED;
+
+ cb_idx = 0;
+ freeme = 0;
+
+ /*
+ * Check for non-TURBO reply!
+ */
+ if (pa & MPI_ADDRESS_REPLY_A_BIT) {
+ u32 reply_dma_low;
+ u16 ioc_stat;
+
+ /* non-TURBO reply! Hmmm, something may be up...
+ * Newest turbo reply mechanism; get address
+ * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
+ */
+
+ /* Map DMA address of reply header to cpu address.
+ * pa is 32 bits - but the dma address may be 32 or 64 bits
+ * get offset based only only the low addresses
+ */
+ reply_dma_low = (pa = (pa << 1));
+ mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
+ (reply_dma_low - ioc->reply_frames_low_dma));
+
+ req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
+ cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
+ mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
+
+ dmfprintk((MYIOC_s_INFO_FMT "Got non-TURBO reply=%p req_idx=%x\n",
+ ioc->name, mr, req_idx));
+ DBG_DUMP_REPLY_FRAME(mr)
+
+ /* NEW! 20010301 -sralston
+ * Check/log IOC log info
+ */
+ ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
+ if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
+ u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
+ if (ioc->bus_type == FC)
+ mpt_fc_log_info(ioc, log_info);
+ else if (ioc->bus_type == SCSI)
+ mpt_sp_log_info(ioc, log_info);
+ }
+ if (ioc_stat & MPI_IOCSTATUS_MASK) {
+ if (ioc->bus_type == SCSI)
+ mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf);
+ }
+ } else {
+ /*
+ * Process turbo (context) reply...
+ */
+ dmfprintk((MYIOC_s_INFO_FMT "Got TURBO reply req_idx=%08x\n", ioc->name, pa));
+ type = (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT);
+ if (type == MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET) {
+ cb_idx = mpt_stm_index;
+ mf = NULL;
+ mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
+ } else if (type == MPI_CONTEXT_REPLY_TYPE_LAN) {
+ cb_idx = mpt_lan_index;
+ /*
+ * BUG FIX! 20001218 -sralston
+ * Blind set of mf to NULL here was fatal
+ * after lan_reply says "freeme"
+ * Fix sort of combined with an optimization here;
+ * added explicit check for case where lan_reply
+ * was just returning 1 and doing nothing else.
+ * For this case skip the callback, but set up
+ * proper mf value first here:-)
+ */
+ if ((pa & 0x58000000) == 0x58000000) {
+ req_idx = pa & 0x0000FFFF;
+ mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
+ freeme = 1;
+ /*
+ * IMPORTANT! Invalidate the callback!
+ */
+ cb_idx = 0;
+ } else {
+ mf = NULL;
+ }
+ mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
+ } else {
+ req_idx = pa & 0x0000FFFF;
+ cb_idx = (pa & 0x00FF0000) >> 16;
+ mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
+ mr = NULL;
+ }
+ pa = 0; /* No reply flush! */
+ }
+
+#ifdef MPT_DEBUG_IRQ
+ if (ioc->bus_type == SCSI) {
+ /* Verify mf, mr are reasonable.
+ */
+ if ((mf) && ((mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))
+ || (mf < ioc->req_frames)) ) {
+ printk(MYIOC_s_WARN_FMT
+ "mpt_interrupt: Invalid mf (%p) req_idx (%d)!\n", ioc->name, (void *)mf, req_idx);
+ cb_idx = 0;
+ pa = 0;
+ freeme = 0;
+ }
+ if ((pa) && (mr) && ((mr >= MPT_INDEX_2_RFPTR(ioc, ioc->req_depth))
+ || (mr < ioc->reply_frames)) ) {
+ printk(MYIOC_s_WARN_FMT
+ "mpt_interrupt: Invalid rf (%p)!\n", ioc->name, (void *)mr);
+ cb_idx = 0;
+ pa = 0;
+ freeme = 0;
+ }
+ if (cb_idx > (MPT_MAX_PROTOCOL_DRIVERS-1)) {
+ printk(MYIOC_s_WARN_FMT
+ "mpt_interrupt: Invalid cb_idx (%d)!\n", ioc->name, cb_idx);
+ cb_idx = 0;
+ pa = 0;
+ freeme = 0;
+ }
+ }
+#endif
+
+ /* Check for (valid) IO callback! */
+ if (cb_idx) {
+ /* Do the callback! */
+ freeme = (*(MptCallbacks[cb_idx]))(ioc, mf, mr);
+ }
+
+ if (pa) {
+ /* Flush (non-TURBO) reply with a WRITE! */
+ CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
+ }
+
+ if (freeme) {
+ unsigned long flags;
+
+ /* Put Request back on FreeQ! */
+ spin_lock_irqsave(&ioc->FreeQlock, flags);
+ list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
+#ifdef MFCNT
+ ioc->mfcnt--;
+#endif
+ spin_unlock_irqrestore(&ioc->FreeQlock, flags);
+ }
+
+ mb();
+ } /* drain reply FIFO */
+
+ return IRQ_HANDLED;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mpt_base_reply - MPT base driver's callback routine; all base driver
+ * "internal" request/reply processing is routed here.
+ * Currently used for EventNotification and EventAck handling.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @mf: Pointer to original MPT request frame
+ * @reply: Pointer to MPT reply frame (NULL if TurboReply)
+ *
+ * Returns 1 indicating original alloc'd request frame ptr
+ * should be freed, or 0 if it shouldn't.
+ */
+static int
+mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)
+{
+ int freereq = 1;
+ u8 func;
+
+ dprintk((MYIOC_s_INFO_FMT "mpt_base_reply() called\n", ioc->name));
+
+ if ((mf == NULL) ||
+ (mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))) {
+ printk(MYIOC_s_ERR_FMT "NULL or BAD request frame ptr! (=%p)\n",
+ ioc->name, (void *)mf);
+ return 1;
+ }
+
+ if (reply == NULL) {
+ dprintk((MYIOC_s_ERR_FMT "Unexpected NULL Event (turbo?) reply!\n",
+ ioc->name));
+ return 1;
+ }
+
+ if (!(reply->u.hdr.MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)) {
+ dmfprintk((KERN_INFO MYNAM ": Original request frame (@%p) header\n", mf));
+ DBG_DUMP_REQUEST_FRAME_HDR(mf)
+ }
+
+ func = reply->u.hdr.Function;
+ dprintk((MYIOC_s_INFO_FMT "mpt_base_reply, Function=%02Xh\n",
+ ioc->name, func));
+
+ if (func == MPI_FUNCTION_EVENT_NOTIFICATION) {
+ EventNotificationReply_t *pEvReply = (EventNotificationReply_t *) reply;
+ int evHandlers = 0;
+ int results;
+
+ results = ProcessEventNotification(ioc, pEvReply, &evHandlers);
+ if (results != evHandlers) {
+ /* CHECKME! Any special handling needed here? */
+ devtprintk((MYIOC_s_WARN_FMT "Called %d event handlers, sum results = %d\n",
+ ioc->name, evHandlers, results));
+ }
+
+ /*
+ * Hmmm... It seems that EventNotificationReply is an exception
+ * to the rule of one reply per request.
+ */
+ if (pEvReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
+ freereq = 0;
+
+#ifdef CONFIG_PROC_FS
+// LogEvent(ioc, pEvReply);
+#endif
+
+ } else if (func == MPI_FUNCTION_EVENT_ACK) {
+ dprintk((MYIOC_s_INFO_FMT "mpt_base_reply, EventAck reply received\n",
+ ioc->name));
+ } else if (func == MPI_FUNCTION_CONFIG ||
+ func == MPI_FUNCTION_TOOLBOX) {
+ CONFIGPARMS *pCfg;
+ unsigned long flags;
+
+ dcprintk((MYIOC_s_INFO_FMT "config_complete (mf=%p,mr=%p)\n",
+ ioc->name, mf, reply));
+
+ pCfg = * ((CONFIGPARMS **)((u8 *) mf + ioc->req_sz - sizeof(void *)));
+
+ if (pCfg) {
+ /* disable timer and remove from linked list */
+ del_timer(&pCfg->timer);
+
+ spin_lock_irqsave(&ioc->FreeQlock, flags);
+ list_del(&pCfg->linkage);
+ spin_unlock_irqrestore(&ioc->FreeQlock, flags);
+
+ /*
+ * If IOC Status is SUCCESS, save the header
+ * and set the status code to GOOD.
+ */
+ pCfg->status = MPT_CONFIG_ERROR;
+ if (reply) {
+ ConfigReply_t *pReply = (ConfigReply_t *)reply;
+ u16 status;
+
+ status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
+ dcprintk((KERN_NOTICE " IOCStatus=%04xh, IOCLogInfo=%08xh\n",
+ status, le32_to_cpu(pReply->IOCLogInfo)));
+
+ pCfg->status = status;
+ if (status == MPI_IOCSTATUS_SUCCESS) {
+ pCfg->hdr->PageVersion = pReply->Header.PageVersion;
+ pCfg->hdr->PageLength = pReply->Header.PageLength;
+ pCfg->hdr->PageNumber = pReply->Header.PageNumber;
+ pCfg->hdr->PageType = pReply->Header.PageType;
+ }
+ }
+
+ /*
+ * Wake up the original calling thread
+ */
+ pCfg->wait_done = 1;
+ wake_up(&mpt_waitq);
+ }
+ } else {
+ printk(MYIOC_s_ERR_FMT "Unexpected msg function (=%02Xh) reply received!\n",
+ ioc->name, func);
+ }
+
+ /*
+ * Conditionally tell caller to free the original
+ * EventNotification/EventAck/unexpected request frame!
+ */
+ return freereq;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_register - Register protocol-specific main callback handler.
+ * @cbfunc: callback function pointer
+ * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value)
+ *
+ * This routine is called by a protocol-specific driver (SCSI host,
+ * LAN, SCSI target) to register it's reply callback routine. Each
+ * protocol-specific driver must do this before it will be able to
+ * use any IOC resources, such as obtaining request frames.
+ *
+ * NOTES: The SCSI protocol driver currently calls this routine thrice
+ * in order to register separate callbacks; one for "normal" SCSI IO;
+ * one for MptScsiTaskMgmt requests; one for Scan/DV requests.
+ *
+ * Returns a positive integer valued "handle" in the
+ * range (and S.O.D. order) {N,...,7,6,5,...,1} if successful.
+ * Any non-positive return value (including zero!) should be considered
+ * an error by the caller.
+ */
+int
+mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass)
+{
+ int i;
+
+ last_drv_idx = -1;
+
+ /*
+ * Search for empty callback slot in this order: {N,...,7,6,5,...,1}
+ * (slot/handle 0 is reserved!)
+ */
+ for (i = MPT_MAX_PROTOCOL_DRIVERS-1; i; i--) {
+ if (MptCallbacks[i] == NULL) {
+ MptCallbacks[i] = cbfunc;
+ MptDriverClass[i] = dclass;
+ MptEvHandlers[i] = NULL;
+ last_drv_idx = i;
+ break;
+ }
+ }
+
+ return last_drv_idx;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_deregister - Deregister a protocol drivers resources.
+ * @cb_idx: previously registered callback handle
+ *
+ * Each protocol-specific driver should call this routine when it's
+ * module is unloaded.
+ */
+void
+mpt_deregister(int cb_idx)
+{
+ if ((cb_idx >= 0) && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) {
+ MptCallbacks[cb_idx] = NULL;
+ MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
+ MptEvHandlers[cb_idx] = NULL;
+
+ last_drv_idx++;
+ }
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_event_register - Register protocol-specific event callback
+ * handler.
+ * @cb_idx: previously registered (via mpt_register) callback handle
+ * @ev_cbfunc: callback function
+ *
+ * This routine can be called by one or more protocol-specific drivers
+ * if/when they choose to be notified of MPT events.
+ *
+ * Returns 0 for success.
+ */
+int
+mpt_event_register(int cb_idx, MPT_EVHANDLER ev_cbfunc)
+{
+ if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
+ return -1;
+
+ MptEvHandlers[cb_idx] = ev_cbfunc;
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_event_deregister - Deregister protocol-specific event callback
+ * handler.
+ * @cb_idx: previously registered callback handle
+ *
+ * Each protocol-specific driver should call this routine
+ * when it does not (or can no longer) handle events,
+ * or when it's module is unloaded.
+ */
+void
+mpt_event_deregister(int cb_idx)
+{
+ if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
+ return;
+
+ MptEvHandlers[cb_idx] = NULL;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_reset_register - Register protocol-specific IOC reset handler.
+ * @cb_idx: previously registered (via mpt_register) callback handle
+ * @reset_func: reset function
+ *
+ * This routine can be called by one or more protocol-specific drivers
+ * if/when they choose to be notified of IOC resets.
+ *
+ * Returns 0 for success.
+ */
+int
+mpt_reset_register(int cb_idx, MPT_RESETHANDLER reset_func)
+{
+ if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
+ return -1;
+
+ MptResetHandlers[cb_idx] = reset_func;
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_reset_deregister - Deregister protocol-specific IOC reset handler.
+ * @cb_idx: previously registered callback handle
+ *
+ * Each protocol-specific driver should call this routine
+ * when it does not (or can no longer) handle IOC reset handling,
+ * or when it's module is unloaded.
+ */
+void
+mpt_reset_deregister(int cb_idx)
+{
+ if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
+ return;
+
+ MptResetHandlers[cb_idx] = NULL;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_device_driver_register - Register device driver hooks
+ */
+int
+mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, int cb_idx)
+{
+ MPT_ADAPTER *ioc;
+ int error=0;
+
+ if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) {
+ error= -EINVAL;
+ return error;
+ }
+
+ MptDeviceDriverHandlers[cb_idx] = dd_cbfunc;
+
+ /* call per pci device probe entry point */
+ list_for_each_entry(ioc, &ioc_list, list) {
+ if(dd_cbfunc->probe) {
+ error = dd_cbfunc->probe(ioc->pcidev,
+ ioc->pcidev->driver->id_table);
+ if(error != 0)
+ return error;
+ }
+ }
+
+ return error;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_device_driver_deregister - DeRegister device driver hooks
+ */
+void
+mpt_device_driver_deregister(int cb_idx)
+{
+ struct mpt_pci_driver *dd_cbfunc;
+ MPT_ADAPTER *ioc;
+
+ if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
+ return;
+
+ dd_cbfunc = MptDeviceDriverHandlers[cb_idx];
+
+ list_for_each_entry(ioc, &ioc_list, list) {
+ if (dd_cbfunc->remove)
+ dd_cbfunc->remove(ioc->pcidev);
+ }
+
+ MptDeviceDriverHandlers[cb_idx] = NULL;
+}
+
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_get_msg_frame - Obtain a MPT request frame from the pool (of 1024)
+ * allocated per MPT adapter.
+ * @handle: Handle of registered MPT protocol driver
+ * @ioc: Pointer to MPT adapter structure
+ *
+ * Returns pointer to a MPT request frame or %NULL if none are available
+ * or IOC is not active.
+ */
+MPT_FRAME_HDR*
+mpt_get_msg_frame(int handle, MPT_ADAPTER *ioc)
+{
+ MPT_FRAME_HDR *mf;
+ unsigned long flags;
+ u16 req_idx; /* Request index */
+
+ /* validate handle and ioc identifier */
+
+#ifdef MFCNT
+ if (!ioc->active)
+ printk(KERN_WARNING "IOC Not Active! mpt_get_msg_frame returning NULL!\n");
+#endif
+
+ /* If interrupts are not attached, do not return a request frame */
+ if (!ioc->active)
+ return NULL;
+
+ spin_lock_irqsave(&ioc->FreeQlock, flags);
+ if (!list_empty(&ioc->FreeQ)) {
+ int req_offset;
+
+ mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR,
+ u.frame.linkage.list);
+ list_del(&mf->u.frame.linkage.list);
+ mf->u.frame.hwhdr.msgctxu.fld.cb_idx = handle; /* byte */
+ req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
+ /* u16! */
+ req_idx = cpu_to_le16(req_offset / ioc->req_sz);
+ mf->u.frame.hwhdr.msgctxu.fld.req_idx = req_idx;
+ mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
+ ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame; /* Default, will be changed if necessary in SG generation */
+#ifdef MFCNT
+ ioc->mfcnt++;
+#endif
+ }
+ else
+ mf = NULL;
+ spin_unlock_irqrestore(&ioc->FreeQlock, flags);
+
+#ifdef MFCNT
+ if (mf == NULL)
+ printk(KERN_WARNING "IOC Active. No free Msg Frames! Count 0x%x Max 0x%x\n", ioc->mfcnt, ioc->req_depth);
+ mfcounter++;
+ if (mfcounter == PRINT_MF_COUNT)
+ printk(KERN_INFO "MF Count 0x%x Max 0x%x \n", ioc->mfcnt, ioc->req_depth);
+#endif
+
+ dmfprintk((KERN_INFO MYNAM ": %s: mpt_get_msg_frame(%d,%d), got mf=%p\n",
+ ioc->name, handle, ioc->id, mf));
+ return mf;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_put_msg_frame - Send a protocol specific MPT request frame
+ * to a IOC.
+ * @handle: Handle of registered MPT protocol driver
+ * @ioc: Pointer to MPT adapter structure
+ * @mf: Pointer to MPT request frame
+ *
+ * This routine posts a MPT request frame to the request post FIFO of a
+ * specific MPT adapter.
+ */
+void
+mpt_put_msg_frame(int handle, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
+{
+ u32 mf_dma_addr;
+ int req_offset;
+ u16 req_idx; /* Request index */
+
+ /* ensure values are reset properly! */
+ mf->u.frame.hwhdr.msgctxu.fld.cb_idx = handle; /* byte */
+ req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
+ /* u16! */
+ req_idx = cpu_to_le16(req_offset / ioc->req_sz);
+ mf->u.frame.hwhdr.msgctxu.fld.req_idx = req_idx;
+ mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
+
+#ifdef MPT_DEBUG_MSG_FRAME
+ {
+ u32 *m = mf->u.frame.hwhdr.__hdr;
+ int ii, n;
+
+ printk(KERN_INFO MYNAM ": %s: About to Put msg frame @ %p:\n" KERN_INFO " ",
+ ioc->name, m);
+ n = ioc->req_sz/4 - 1;
+ while (m[n] == 0)
+ n--;
+ for (ii=0; ii<=n; ii++) {
+ if (ii && ((ii%8)==0))
+ printk("\n" KERN_INFO " ");
+ printk(" %08x", le32_to_cpu(m[ii]));
+ }
+ printk("\n");
+ }
+#endif
+
+ mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
+ dsgprintk((MYIOC_s_INFO_FMT "mf_dma_addr=%x req_idx=%d RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx, ioc->RequestNB[req_idx]));
+ CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_free_msg_frame - Place MPT request frame back on FreeQ.
+ * @handle: Handle of registered MPT protocol driver
+ * @ioc: Pointer to MPT adapter structure
+ * @mf: Pointer to MPT request frame
+ *
+ * This routine places a MPT request frame back on the MPT adapter's
+ * FreeQ.
+ */
+void
+mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
+{
+ unsigned long flags;
+
+ /* Put Request back on FreeQ! */
+ spin_lock_irqsave(&ioc->FreeQlock, flags);
+ list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
+#ifdef MFCNT
+ ioc->mfcnt--;
+#endif
+ spin_unlock_irqrestore(&ioc->FreeQlock, flags);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_add_sge - Place a simple SGE at address pAddr.
+ * @pAddr: virtual address for SGE
+ * @flagslength: SGE flags and data transfer length
+ * @dma_addr: Physical address
+ *
+ * This routine places a MPT request frame back on the MPT adapter's
+ * FreeQ.
+ */
+void
+mpt_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr)
+{
+ if (sizeof(dma_addr_t) == sizeof(u64)) {
+ SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
+ u32 tmp = dma_addr & 0xFFFFFFFF;
+
+ pSge->FlagsLength = cpu_to_le32(flagslength);
+ pSge->Address.Low = cpu_to_le32(tmp);
+ tmp = (u32) ((u64)dma_addr >> 32);
+ pSge->Address.High = cpu_to_le32(tmp);
+
+ } else {
+ SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
+ pSge->FlagsLength = cpu_to_le32(flagslength);
+ pSge->Address = cpu_to_le32(dma_addr);
+ }
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_send_handshake_request - Send MPT request via doorbell
+ * handshake method.
+ * @handle: Handle of registered MPT protocol driver
+ * @ioc: Pointer to MPT adapter structure
+ * @reqBytes: Size of the request in bytes
+ * @req: Pointer to MPT request frame
+ * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
+ *
+ * This routine is used exclusively to send MptScsiTaskMgmt
+ * requests since they are required to be sent via doorbell handshake.
+ *
+ * NOTE: It is the callers responsibility to byte-swap fields in the
+ * request which are greater than 1 byte in size.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt_send_handshake_request(int handle, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag)
+{
+ int r = 0;
+ u8 *req_as_bytes;
+ int ii;
+
+ /* State is known to be good upon entering
+ * this function so issue the bus reset
+ * request.
+ */
+
+ /*
+ * Emulate what mpt_put_msg_frame() does /wrt to sanity
+ * setting cb_idx/req_idx. But ONLY if this request
+ * is in proper (pre-alloc'd) request buffer range...
+ */
+ ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req);
+ if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) {
+ MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req;
+ mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii);
+ mf->u.frame.hwhdr.msgctxu.fld.cb_idx = handle;
+ }
+
+ /* Make sure there are no doorbells */
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
+ CHIPREG_WRITE32(&ioc->chip->Doorbell,
+ ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
+ ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
+
+ /* Wait for IOC doorbell int */
+ if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) {
+ return ii;
+ }
+
+ /* Read doorbell and check for active bit */
+ if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
+ return -5;
+
+ dhsprintk((KERN_INFO MYNAM ": %s: mpt_send_handshake_request start, WaitCnt=%d\n",
+ ioc->name, ii));
+
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
+ if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
+ return -2;
+ }
+
+ /* Send request via doorbell handshake */
+ req_as_bytes = (u8 *) req;
+ for (ii = 0; ii < reqBytes/4; ii++) {
+ u32 word;
+
+ word = ((req_as_bytes[(ii*4) + 0] << 0) |
+ (req_as_bytes[(ii*4) + 1] << 8) |
+ (req_as_bytes[(ii*4) + 2] << 16) |
+ (req_as_bytes[(ii*4) + 3] << 24));
+ CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
+ if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
+ r = -3;
+ break;
+ }
+ }
+
+ if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0)
+ r = 0;
+ else
+ r = -4;
+
+ /* Make sure there are no doorbells */
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
+ return r;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_verify_adapter - Given a unique IOC identifier, set pointer to
+ * the associated MPT adapter structure.
+ * @iocid: IOC unique identifier (integer)
+ * @iocpp: Pointer to pointer to IOC adapter
+ *
+ * Returns iocid and sets iocpp.
+ */
+int
+mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
+{
+ MPT_ADAPTER *ioc;
+
+ list_for_each_entry(ioc,&ioc_list,list) {
+ if (ioc->id == iocid) {
+ *iocpp =ioc;
+ return iocid;
+ }
+ }
+
+ *iocpp = NULL;
+ return -1;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mptbase_probe - Install a PCI intelligent MPT adapter.
+ * @pdev: Pointer to pci_dev structure
+ *
+ * This routine performs all the steps necessary to bring the IOC of
+ * a MPT adapter to a OPERATIONAL state. This includes registering
+ * memory regions, registering the interrupt, and allocating request
+ * and reply memory pools.
+ *
+ * This routine also pre-fetches the LAN MAC address of a Fibre Channel
+ * MPT adapter.
+ *
+ * Returns 0 for success, non-zero for failure.
+ *
+ * TODO: Add support for polled controllers
+ */
+static int __devinit
+mptbase_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ MPT_ADAPTER *ioc;
+ u8 __iomem *mem;
+ unsigned long mem_phys;
+ unsigned long port;
+ u32 msize;
+ u32 psize;
+ int ii;
+ int r = -ENODEV;
+ u64 mask = 0xffffffffffffffffULL;
+ u8 revision;
+ u8 pcixcmd;
+ static int mpt_ids = 0;
+#ifdef CONFIG_PROC_FS
+ struct proc_dir_entry *dent, *ent;
+#endif
+
+ if (pci_enable_device(pdev))
+ return r;
+
+ dinitprintk((KERN_WARNING MYNAM ": mpt_adapter_install\n"));
+
+ if (!pci_set_dma_mask(pdev, mask)) {
+ dprintk((KERN_INFO MYNAM
+ ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n"));
+ } else if (pci_set_dma_mask(pdev, (u64) 0xffffffff)) {
+ printk(KERN_WARNING MYNAM ": 32 BIT PCI BUS DMA ADDRESSING NOT SUPPORTED\n");
+ return r;
+ }
+
+ if (!pci_set_consistent_dma_mask(pdev, mask))
+ dprintk((KERN_INFO MYNAM
+ ": Using 64 bit consistent mask\n"));
+ else
+ dprintk((KERN_INFO MYNAM
+ ": Not using 64 bit consistent mask\n"));
+
+ ioc = kmalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC);
+ if (ioc == NULL) {
+ printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
+ return -ENOMEM;
+ }
+ memset(ioc, 0, sizeof(MPT_ADAPTER));
+ ioc->alloc_total = sizeof(MPT_ADAPTER);
+ ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */
+ ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
+
+ ioc->pcidev = pdev;
+ ioc->diagPending = 0;
+ spin_lock_init(&ioc->diagLock);
+
+ /* Initialize the event logging.
+ */
+ ioc->eventTypes = 0; /* None */
+ ioc->eventContext = 0;
+ ioc->eventLogSize = 0;
+ ioc->events = NULL;
+
+#ifdef MFCNT
+ ioc->mfcnt = 0;
+#endif
+
+ ioc->cached_fw = NULL;
+
+ /* Initilize SCSI Config Data structure
+ */
+ memset(&ioc->spi_data, 0, sizeof(ScsiCfgData));
+
+ /* Initialize the running configQ head.
+ */
+ INIT_LIST_HEAD(&ioc->configQ);
+
+ /* Find lookup slot. */
+ INIT_LIST_HEAD(&ioc->list);
+ ioc->id = mpt_ids++;
+
+ mem_phys = msize = 0;
+ port = psize = 0;
+ for (ii=0; ii < DEVICE_COUNT_RESOURCE; ii++) {
+ if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
+ /* Get I/O space! */
+ port = pci_resource_start(pdev, ii);
+ psize = pci_resource_len(pdev,ii);
+ } else {
+ /* Get memmap */
+ mem_phys = pci_resource_start(pdev, ii);
+ msize = pci_resource_len(pdev,ii);
+ break;
+ }
+ }
+ ioc->mem_size = msize;
+
+ if (ii == DEVICE_COUNT_RESOURCE) {
+ printk(KERN_ERR MYNAM ": ERROR - MPT adapter has no memory regions defined!\n");
+ kfree(ioc);
+ return -EINVAL;
+ }
+
+ dinitprintk((KERN_INFO MYNAM ": MPT adapter @ %lx, msize=%dd bytes\n", mem_phys, msize));
+ dinitprintk((KERN_INFO MYNAM ": (port i/o @ %lx, psize=%dd bytes)\n", port, psize));
+
+ mem = NULL;
+ /* Get logical ptr for PciMem0 space */
+ /*mem = ioremap(mem_phys, msize);*/
+ mem = ioremap(mem_phys, 0x100);
+ if (mem == NULL) {
+ printk(KERN_ERR MYNAM ": ERROR - Unable to map adapter memory!\n");
+ kfree(ioc);
+ return -EINVAL;
+ }
+ ioc->memmap = mem;
+ dinitprintk((KERN_INFO MYNAM ": mem = %p, mem_phys = %lx\n", mem, mem_phys));
+
+ dinitprintk((KERN_INFO MYNAM ": facts @ %p, pfacts[0] @ %p\n",
+ &ioc->facts, &ioc->pfacts[0]));
+
+ ioc->mem_phys = mem_phys;
+ ioc->chip = (SYSIF_REGS __iomem *)mem;
+
+ /* Save Port IO values in case we need to do downloadboot */
+ {
+ u8 *pmem = (u8*)port;
+ ioc->pio_mem_phys = port;
+ ioc->pio_chip = (SYSIF_REGS __iomem *)pmem;
+ }
+
+ if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC909) {
+ ioc->prod_name = "LSIFC909";
+ ioc->bus_type = FC;
+ }
+ if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC929) {
+ ioc->prod_name = "LSIFC929";
+ ioc->bus_type = FC;
+ }
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC919) {
+ ioc->prod_name = "LSIFC919";
+ ioc->bus_type = FC;
+ }
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC929X) {
+ pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
+ ioc->bus_type = FC;
+ if (revision < XL_929) {
+ ioc->prod_name = "LSIFC929X";
+ /* 929X Chip Fix. Set Split transactions level
+ * for PCIX. Set MOST bits to zero.
+ */
+ pci_read_config_byte(pdev, 0x6a, &pcixcmd);
+ pcixcmd &= 0x8F;
+ pci_write_config_byte(pdev, 0x6a, pcixcmd);
+ } else {
+ ioc->prod_name = "LSIFC929XL";
+ /* 929XL Chip Fix. Set MMRBC to 0x08.
+ */
+ pci_read_config_byte(pdev, 0x6a, &pcixcmd);
+ pcixcmd |= 0x08;
+ pci_write_config_byte(pdev, 0x6a, pcixcmd);
+ }
+ }
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC919X) {
+ ioc->prod_name = "LSIFC919X";
+ ioc->bus_type = FC;
+ /* 919X Chip Fix. Set Split transactions level
+ * for PCIX. Set MOST bits to zero.
+ */
+ pci_read_config_byte(pdev, 0x6a, &pcixcmd);
+ pcixcmd &= 0x8F;
+ pci_write_config_byte(pdev, 0x6a, pcixcmd);
+ }
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVID_53C1030) {
+ ioc->prod_name = "LSI53C1030";
+ ioc->bus_type = SCSI;
+ /* 1030 Chip Fix. Disable Split transactions
+ * for PCIX. Set MOST bits to zero if Rev < C0( = 8).
+ */
+ pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
+ if (revision < C0_1030) {
+ pci_read_config_byte(pdev, 0x6a, &pcixcmd);
+ pcixcmd &= 0x8F;
+ pci_write_config_byte(pdev, 0x6a, pcixcmd);
+ }
+ }
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVID_1030_53C1035) {
+ ioc->prod_name = "LSI53C1035";
+ ioc->bus_type = SCSI;
+ }
+
+ sprintf(ioc->name, "ioc%d", ioc->id);
+
+ spin_lock_init(&ioc->FreeQlock);
+
+ /* Disable all! */
+ CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
+ ioc->active = 0;
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
+ /* Set lookup ptr. */
+ list_add_tail(&ioc->list, &ioc_list);
+
+ ioc->pci_irq = -1;
+ if (pdev->irq) {
+ r = request_irq(pdev->irq, mpt_interrupt, SA_SHIRQ, ioc->name, ioc);
+
+ if (r < 0) {
+#ifndef __sparc__
+ printk(MYIOC_s_ERR_FMT "Unable to allocate interrupt %d!\n",
+ ioc->name, pdev->irq);
+#else
+ printk(MYIOC_s_ERR_FMT "Unable to allocate interrupt %s!\n",
+ ioc->name, __irq_itoa(pdev->irq));
+#endif
+ list_del(&ioc->list);
+ iounmap(mem);
+ kfree(ioc);
+ return -EBUSY;
+ }
+
+ ioc->pci_irq = pdev->irq;
+
+ pci_set_master(pdev); /* ?? */
+ pci_set_drvdata(pdev, ioc);
+
+#ifndef __sparc__
+ dprintk((KERN_INFO MYNAM ": %s installed at interrupt %d\n", ioc->name, pdev->irq));
+#else
+ dprintk((KERN_INFO MYNAM ": %s installed at interrupt %s\n", ioc->name, __irq_itoa(pdev->irq)));
+#endif
+ }
+
+ /* NEW! 20010220 -sralston
+ * Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets.
+ */
+ mpt_detect_bound_ports(ioc, pdev);
+
+ if ((r = mpt_do_ioc_recovery(ioc,
+ MPT_HOSTEVENT_IOC_BRINGUP, CAN_SLEEP)) != 0) {
+ printk(KERN_WARNING MYNAM
+ ": WARNING - %s did not initialize properly! (%d)\n",
+ ioc->name, r);
+
+ list_del(&ioc->list);
+ free_irq(ioc->pci_irq, ioc);
+ iounmap(mem);
+ kfree(ioc);
+ pci_set_drvdata(pdev, NULL);
+ return r;
+ }
+
+ /* call per device driver probe entry point */
+ for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) {
+ if(MptDeviceDriverHandlers[ii] &&
+ MptDeviceDriverHandlers[ii]->probe) {
+ MptDeviceDriverHandlers[ii]->probe(pdev,id);
+ }
+ }
+
+#ifdef CONFIG_PROC_FS
+ /*
+ * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter.
+ */
+ dent = proc_mkdir(ioc->name, mpt_proc_root_dir);
+ if (dent) {
+ ent = create_proc_entry("info", S_IFREG|S_IRUGO, dent);
+ if (ent) {
+ ent->read_proc = procmpt_iocinfo_read;
+ ent->data = ioc;
+ }
+ ent = create_proc_entry("summary", S_IFREG|S_IRUGO, dent);
+ if (ent) {
+ ent->read_proc = procmpt_summary_read;
+ ent->data = ioc;
+ }
+ }
+#endif
+
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mptbase_remove - Remove a PCI intelligent MPT adapter.
+ * @pdev: Pointer to pci_dev structure
+ *
+ */
+
+static void __devexit
+mptbase_remove(struct pci_dev *pdev)
+{
+ MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
+ char pname[32];
+ int ii;
+
+ sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
+ remove_proc_entry(pname, NULL);
+ sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name);
+ remove_proc_entry(pname, NULL);
+ sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
+ remove_proc_entry(pname, NULL);
+
+ /* call per device driver remove entry point */
+ for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) {
+ if(MptDeviceDriverHandlers[ii] &&
+ MptDeviceDriverHandlers[ii]->remove) {
+ MptDeviceDriverHandlers[ii]->remove(pdev);
+ }
+ }
+
+ /* Disable interrupts! */
+ CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
+
+ ioc->active = 0;
+ synchronize_irq(pdev->irq);
+
+ /* Clear any lingering interrupt */
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
+ CHIPREG_READ32(&ioc->chip->IntStatus);
+
+ mpt_adapter_dispose(ioc);
+
+ pci_set_drvdata(pdev, NULL);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mptbase_shutdown -
+ *
+ */
+static void
+mptbase_shutdown(struct device * dev)
+{
+ int ii;
+
+ /* call per device driver shutdown entry point */
+ for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) {
+ if(MptDeviceDriverHandlers[ii] &&
+ MptDeviceDriverHandlers[ii]->shutdown) {
+ MptDeviceDriverHandlers[ii]->shutdown(dev);
+ }
+ }
+
+}
+
+
+/**************************************************************************
+ * Power Management
+ */
+#ifdef CONFIG_PM
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mptbase_suspend - Fusion MPT base driver suspend routine.
+ *
+ *
+ */
+static int
+mptbase_suspend(struct pci_dev *pdev, u32 state)
+{
+ u32 device_state;
+ MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
+ int ii;
+
+ switch(state)
+ {
+ case 1: /* S1 */
+ device_state=1; /* D1 */;
+ break;
+ case 3: /* S3 */
+ case 4: /* S4 */
+ device_state=3; /* D3 */;
+ break;
+ default:
+ return -EAGAIN /*FIXME*/;
+ break;
+ }
+
+ printk(MYIOC_s_INFO_FMT
+ "pci-suspend: pdev=0x%p, slot=%s, Entering operating state [D%d]\n",
+ ioc->name, pdev, pci_name(pdev), device_state);
+
+ /* call per device driver suspend entry point */
+ for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) {
+ if(MptDeviceDriverHandlers[ii] &&
+ MptDeviceDriverHandlers[ii]->suspend) {
+ MptDeviceDriverHandlers[ii]->suspend(pdev, state);
+ }
+ }
+
+ pci_save_state(pdev);
+
+ /* put ioc into READY_STATE */
+ if(SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) {
+ printk(MYIOC_s_ERR_FMT
+ "pci-suspend: IOC msg unit reset failed!\n", ioc->name);
+ }
+
+ /* disable interrupts */
+ CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
+ ioc->active = 0;
+
+ /* Clear any lingering interrupt */
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, device_state);
+
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mptbase_resume - Fusion MPT base driver resume routine.
+ *
+ *
+ */
+static int
+mptbase_resume(struct pci_dev *pdev)
+{
+ MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
+ u32 device_state = pdev->current_state;
+ int recovery_state;
+ int ii;
+
+ printk(MYIOC_s_INFO_FMT
+ "pci-resume: pdev=0x%p, slot=%s, Previous operating state [D%d]\n",
+ ioc->name, pdev, pci_name(pdev), device_state);
+
+ pci_set_power_state(pdev, 0);
+ pci_restore_state(pdev);
+ pci_enable_device(pdev);
+
+ /* enable interrupts */
+ CHIPREG_WRITE32(&ioc->chip->IntMask, ~(MPI_HIM_RIM));
+ ioc->active = 1;
+
+ /* F/W not running */
+ if(!CHIPREG_READ32(&ioc->chip->Doorbell)) {
+ /* enable domain validation flags */
+ for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
+ ioc->spi_data.dvStatus[ii] |= MPT_SCSICFG_NEED_DV;
+ }
+ }
+
+ printk(MYIOC_s_INFO_FMT
+ "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
+ ioc->name,
+ (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
+ CHIPREG_READ32(&ioc->chip->Doorbell));
+
+ /* bring ioc to operational state */
+ if ((recovery_state = mpt_do_ioc_recovery(ioc,
+ MPT_HOSTEVENT_IOC_RECOVER, CAN_SLEEP)) != 0) {
+ printk(MYIOC_s_INFO_FMT
+ "pci-resume: Cannot recover, error:[%x]\n",
+ ioc->name, recovery_state);
+ } else {
+ printk(MYIOC_s_INFO_FMT
+ "pci-resume: success\n", ioc->name);
+ }
+
+ /* call per device driver resume entry point */
+ for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) {
+ if(MptDeviceDriverHandlers[ii] &&
+ MptDeviceDriverHandlers[ii]->resume) {
+ MptDeviceDriverHandlers[ii]->resume(pdev);
+ }
+ }
+
+ return 0;
+}
+#endif
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mpt_do_ioc_recovery - Initialize or recover MPT adapter.
+ * @ioc: Pointer to MPT adapter structure
+ * @reason: Event word / reason
+ * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
+ *
+ * This routine performs all the steps necessary to bring the IOC
+ * to a OPERATIONAL state.
+ *
+ * This routine also pre-fetches the LAN MAC address of a Fibre Channel
+ * MPT adapter.
+ *
+ * Returns:
+ * 0 for success
+ * -1 if failed to get board READY
+ * -2 if READY but IOCFacts Failed
+ * -3 if READY but PrimeIOCFifos Failed
+ * -4 if READY but IOCInit Failed
+ */
+static int
+mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
+{
+ int hard_reset_done = 0;
+ int alt_ioc_ready = 0;
+ int hard;
+ int rc=0;
+ int ii;
+ int handlers;
+ int ret = 0;
+ int reset_alt_ioc_active = 0;
+
+ printk(KERN_INFO MYNAM ": Initiating %s %s\n",
+ ioc->name, reason==MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery");
+
+ /* Disable reply interrupts (also blocks FreeQ) */
+ CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
+ ioc->active = 0;
+
+ if (ioc->alt_ioc) {
+ if (ioc->alt_ioc->active)
+ reset_alt_ioc_active = 1;
+
+ /* Disable alt-IOC's reply interrupts (and FreeQ) for a bit ... */
+ CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, 0xFFFFFFFF);
+ ioc->alt_ioc->active = 0;
+ }
+
+ hard = 1;
+ if (reason == MPT_HOSTEVENT_IOC_BRINGUP)
+ hard = 0;
+
+ if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) {
+ if (hard_reset_done == -4) {
+ printk(KERN_WARNING MYNAM ": %s Owned by PEER..skipping!\n",
+ ioc->name);
+
+ if (reset_alt_ioc_active && ioc->alt_ioc) {
+ /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */
+ dprintk((KERN_INFO MYNAM ": alt-%s reply irq re-enabled\n",
+ ioc->alt_ioc->name));
+ CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, ~(MPI_HIM_RIM));
+ ioc->alt_ioc->active = 1;
+ }
+
+ } else {
+ printk(KERN_WARNING MYNAM ": %s NOT READY WARNING!\n",
+ ioc->name);
+ }
+ return -1;
+ }
+
+ /* hard_reset_done = 0 if a soft reset was performed
+ * and 1 if a hard reset was performed.
+ */
+ if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) {
+ if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
+ alt_ioc_ready = 1;
+ else
+ printk(KERN_WARNING MYNAM
+ ": alt-%s: Not ready WARNING!\n",
+ ioc->alt_ioc->name);
+ }
+
+ for (ii=0; ii<5; ii++) {
+ /* Get IOC facts! Allow 5 retries */
+ if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
+ break;
+ }
+
+
+ if (ii == 5) {
+ dinitprintk((MYIOC_s_INFO_FMT "Retry IocFacts failed rc=%x\n", ioc->name, rc));
+ ret = -2;
+ } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
+ MptDisplayIocCapabilities(ioc);
+ }
+
+ if (alt_ioc_ready) {
+ if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
+ dinitprintk((MYIOC_s_INFO_FMT "Initial Alt IocFacts failed rc=%x\n", ioc->name, rc));
+ /* Retry - alt IOC was initialized once
+ */
+ rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
+ }
+ if (rc) {
+ dinitprintk((MYIOC_s_INFO_FMT "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc));
+ alt_ioc_ready = 0;
+ reset_alt_ioc_active = 0;
+ } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
+ MptDisplayIocCapabilities(ioc->alt_ioc);
+ }
+ }
+
+ /* Prime reply & request queues!
+ * (mucho alloc's) Must be done prior to
+ * init as upper addresses are needed for init.
+ * If fails, continue with alt-ioc processing
+ */
+ if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
+ ret = -3;
+
+ /* May need to check/upload firmware & data here!
+ * If fails, continue with alt-ioc processing
+ */
+ if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
+ ret = -4;
+// NEW!
+ if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
+ printk(KERN_WARNING MYNAM ": alt-%s: (%d) FIFO mgmt alloc WARNING!\n",
+ ioc->alt_ioc->name, rc);
+ alt_ioc_ready = 0;
+ reset_alt_ioc_active = 0;
+ }
+
+ if (alt_ioc_ready) {
+ if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
+ alt_ioc_ready = 0;
+ reset_alt_ioc_active = 0;
+ printk(KERN_WARNING MYNAM
+ ": alt-%s: (%d) init failure WARNING!\n",
+ ioc->alt_ioc->name, rc);
+ }
+ }
+
+ if (reason == MPT_HOSTEVENT_IOC_BRINGUP){
+ if (ioc->upload_fw) {
+ ddlprintk((MYIOC_s_INFO_FMT
+ "firmware upload required!\n", ioc->name));
+
+ /* Controller is not operational, cannot do upload
+ */
+ if (ret == 0) {
+ rc = mpt_do_upload(ioc, sleepFlag);
+ if (rc != 0)
+ printk(KERN_WARNING MYNAM ": firmware upload failure!\n");
+ }
+ }
+ }
+
+ if (ret == 0) {
+ /* Enable! (reply interrupt) */
+ CHIPREG_WRITE32(&ioc->chip->IntMask, ~(MPI_HIM_RIM));
+ ioc->active = 1;
+ }
+
+ if (reset_alt_ioc_active && ioc->alt_ioc) {
+ /* (re)Enable alt-IOC! (reply interrupt) */
+ dprintk((KERN_INFO MYNAM ": alt-%s reply irq re-enabled\n",
+ ioc->alt_ioc->name));
+ CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, ~(MPI_HIM_RIM));
+ ioc->alt_ioc->active = 1;
+ }
+
+ /* NEW! 20010120 -sralston
+ * Enable MPT base driver management of EventNotification
+ * and EventAck handling.
+ */
+ if ((ret == 0) && (!ioc->facts.EventState))
+ (void) SendEventNotification(ioc, 1); /* 1=Enable EventNotification */
+
+ if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
+ (void) SendEventNotification(ioc->alt_ioc, 1); /* 1=Enable EventNotification */
+
+ /* (Bugzilla:fibrebugs, #513)
+ * Bug fix (part 2)! 20010905 -sralston
+ * Add additional "reason" check before call to GetLanConfigPages
+ * (combined with GetIoUnitPage2 call). This prevents a somewhat
+ * recursive scenario; GetLanConfigPages times out, timer expired
+ * routine calls HardResetHandler, which calls into here again,
+ * and we try GetLanConfigPages again...
+ */
+ if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
+ if (ioc->bus_type == FC) {
+ /*
+ * Pre-fetch FC port WWN and stuff...
+ * (FCPortPage0_t stuff)
+ */
+ for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
+ (void) GetFcPortPage0(ioc, ii);
+ }
+
+ if ((ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) &&
+ (ioc->lan_cnfg_page0.Header.PageLength == 0)) {
+ /*
+ * Pre-fetch the ports LAN MAC address!
+ * (LANPage1_t stuff)
+ */
+ (void) GetLanConfigPages(ioc);
+#ifdef MPT_DEBUG
+ {
+ u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
+ dprintk((MYIOC_s_INFO_FMT "LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
+ ioc->name, a[5], a[4], a[3], a[2], a[1], a[0] ));
+ }
+#endif
+ }
+ } else {
+ /* Get NVRAM and adapter maximums from SPP 0 and 2
+ */
+ mpt_GetScsiPortSettings(ioc, 0);
+
+ /* Get version and length of SDP 1
+ */
+ mpt_readScsiDevicePageHeaders(ioc, 0);
+
+ /* Find IM volumes
+ */
+ if (ioc->facts.MsgVersion >= 0x0102)
+ mpt_findImVolumes(ioc);
+
+ /* Check, and possibly reset, the coalescing value
+ */
+ mpt_read_ioc_pg_1(ioc);
+
+ mpt_read_ioc_pg_4(ioc);
+ }
+
+ GetIoUnitPage2(ioc);
+ }
+
+ /*
+ * Call each currently registered protocol IOC reset handler
+ * with post-reset indication.
+ * NOTE: If we're doing _IOC_BRINGUP, there can be no
+ * MptResetHandlers[] registered yet.
+ */
+ if (hard_reset_done) {
+ rc = handlers = 0;
+ for (ii=MPT_MAX_PROTOCOL_DRIVERS-1; ii; ii--) {
+ if ((ret == 0) && MptResetHandlers[ii]) {
+ dprintk((MYIOC_s_INFO_FMT "Calling IOC post_reset handler #%d\n",
+ ioc->name, ii));
+ rc += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_POST_RESET);
+ handlers++;
+ }
+
+ if (alt_ioc_ready && MptResetHandlers[ii]) {
+ dprintk((MYIOC_s_INFO_FMT "Calling alt-%s post_reset handler #%d\n",
+ ioc->name, ioc->alt_ioc->name, ii));
+ rc += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_POST_RESET);
+ handlers++;
+ }
+ }
+ /* FIXME? Examine results here? */
+ }
+
+ return ret;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mpt_detect_bound_ports - Search for PCI bus/dev_function
+ * which matches PCI bus/dev_function (+/-1) for newly discovered 929,
+ * 929X, 1030 or 1035.
+ * @ioc: Pointer to MPT adapter structure
+ * @pdev: Pointer to (struct pci_dev) structure
+ *
+ * If match on PCI dev_function +/-1 is found, bind the two MPT adapters
+ * using alt_ioc pointer fields in their %MPT_ADAPTER structures.
+ */
+static void
+mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
+{
+ unsigned int match_lo, match_hi;
+ MPT_ADAPTER *ioc_srch;
+
+ match_lo = pdev->devfn-1;
+ match_hi = pdev->devfn+1;
+ dprintk((MYIOC_s_INFO_FMT "PCI bus/devfn=%x/%x, searching for devfn match on %x or %x\n",
+ ioc->name, pdev->bus->number, pdev->devfn, match_lo, match_hi));
+
+ list_for_each_entry(ioc_srch, &ioc_list, list) {
+ struct pci_dev *_pcidev = ioc_srch->pcidev;
+
+ if ((_pcidev->device == pdev->device) &&
+ (_pcidev->bus->number == pdev->bus->number) &&
+ (_pcidev->devfn == match_lo || _pcidev->devfn == match_hi) ) {
+ /* Paranoia checks */
+ if (ioc->alt_ioc != NULL) {
+ printk(KERN_WARNING MYNAM ": Oops, already bound (%s <==> %s)!\n",
+ ioc->name, ioc->alt_ioc->name);
+ break;
+ } else if (ioc_srch->alt_ioc != NULL) {
+ printk(KERN_WARNING MYNAM ": Oops, already bound (%s <==> %s)!\n",
+ ioc_srch->name, ioc_srch->alt_ioc->name);
+ break;
+ }
+ dprintk((KERN_INFO MYNAM ": FOUND! binding %s <==> %s\n",
+ ioc->name, ioc_srch->name));
+ ioc_srch->alt_ioc = ioc;
+ ioc->alt_ioc = ioc_srch;
+ break;
+ }
+ }
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mpt_adapter_disable - Disable misbehaving MPT adapter.
+ * @this: Pointer to MPT adapter structure
+ */
+static void
+mpt_adapter_disable(MPT_ADAPTER *ioc)
+{
+ int sz;
+ int ret;
+
+ if (ioc->cached_fw != NULL) {
+ ddlprintk((KERN_INFO MYNAM ": mpt_adapter_disable: Pushing FW onto adapter\n"));
+ if ((ret = mpt_downloadboot(ioc, NO_SLEEP)) < 0) {
+ printk(KERN_WARNING MYNAM
+ ": firmware downloadboot failure (%d)!\n", ret);
+ }
+ }
+
+ /* Disable adapter interrupts! */
+ CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
+ ioc->active = 0;
+ /* Clear any lingering interrupt */
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
+ if (ioc->alloc != NULL) {
+ sz = ioc->alloc_sz;
+ dexitprintk((KERN_INFO MYNAM ": %s.free @ %p, sz=%d bytes\n",
+ ioc->name, ioc->alloc, ioc->alloc_sz));
+ pci_free_consistent(ioc->pcidev, sz,
+ ioc->alloc, ioc->alloc_dma);
+ ioc->reply_frames = NULL;
+ ioc->req_frames = NULL;
+ ioc->alloc = NULL;
+ ioc->alloc_total -= sz;
+ }
+
+ if (ioc->sense_buf_pool != NULL) {
+ sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
+ pci_free_consistent(ioc->pcidev, sz,
+ ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
+ ioc->sense_buf_pool = NULL;
+ ioc->alloc_total -= sz;
+ }
+
+ if (ioc->events != NULL){
+ sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS);
+ kfree(ioc->events);
+ ioc->events = NULL;
+ ioc->alloc_total -= sz;
+ }
+
+ if (ioc->cached_fw != NULL) {
+ sz = ioc->facts.FWImageSize;
+ pci_free_consistent(ioc->pcidev, sz,
+ ioc->cached_fw, ioc->cached_fw_dma);
+ ioc->cached_fw = NULL;
+ ioc->alloc_total -= sz;
+ }
+
+ if (ioc->spi_data.nvram != NULL) {
+ kfree(ioc->spi_data.nvram);
+ ioc->spi_data.nvram = NULL;
+ }
+
+ if (ioc->spi_data.pIocPg3 != NULL) {
+ kfree(ioc->spi_data.pIocPg3);
+ ioc->spi_data.pIocPg3 = NULL;
+ }
+
+ if (ioc->spi_data.pIocPg4 != NULL) {
+ sz = ioc->spi_data.IocPg4Sz;
+ pci_free_consistent(ioc->pcidev, sz,
+ ioc->spi_data.pIocPg4,
+ ioc->spi_data.IocPg4_dma);
+ ioc->spi_data.pIocPg4 = NULL;
+ ioc->alloc_total -= sz;
+ }
+
+ if (ioc->ReqToChain != NULL) {
+ kfree(ioc->ReqToChain);
+ kfree(ioc->RequestNB);
+ ioc->ReqToChain = NULL;
+ }
+
+ if (ioc->ChainToChain != NULL) {
+ kfree(ioc->ChainToChain);
+ ioc->ChainToChain = NULL;
+ }
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mpt_adapter_dispose - Free all resources associated with a MPT
+ * adapter.
+ * @ioc: Pointer to MPT adapter structure
+ *
+ * This routine unregisters h/w resources and frees all alloc'd memory
+ * associated with a MPT adapter structure.
+ */
+static void
+mpt_adapter_dispose(MPT_ADAPTER *ioc)
+{
+ if (ioc != NULL) {
+ int sz_first, sz_last;
+
+ sz_first = ioc->alloc_total;
+
+ mpt_adapter_disable(ioc);
+
+ if (ioc->pci_irq != -1) {
+ free_irq(ioc->pci_irq, ioc);
+ ioc->pci_irq = -1;
+ }
+
+ if (ioc->memmap != NULL)
+ iounmap(ioc->memmap);
+
+#if defined(CONFIG_MTRR) && 0
+ if (ioc->mtrr_reg > 0) {
+ mtrr_del(ioc->mtrr_reg, 0, 0);
+ dprintk((KERN_INFO MYNAM ": %s: MTRR region de-registered\n", ioc->name));
+ }
+#endif
+
+ /* Zap the adapter lookup ptr! */
+ list_del(&ioc->list);
+
+ sz_last = ioc->alloc_total;
+ dprintk((KERN_INFO MYNAM ": %s: free'd %d of %d bytes\n",
+ ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
+ kfree(ioc);
+ }
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * MptDisplayIocCapabilities - Disply IOC's capacilities.
+ * @ioc: Pointer to MPT adapter structure
+ */
+static void
+MptDisplayIocCapabilities(MPT_ADAPTER *ioc)
+{
+ int i = 0;
+
+ printk(KERN_INFO "%s: ", ioc->name);
+ if (ioc->prod_name && strlen(ioc->prod_name) > 3)
+ printk("%s: ", ioc->prod_name+3);
+ printk("Capabilities={");
+
+ if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) {
+ printk("Initiator");
+ i++;
+ }
+
+ if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
+ printk("%sTarget", i ? "," : "");
+ i++;
+ }
+
+ if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
+ printk("%sLAN", i ? "," : "");
+ i++;
+ }
+
+#if 0
+ /*
+ * This would probably evoke more questions than it's worth
+ */
+ if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
+ printk("%sLogBusAddr", i ? "," : "");
+ i++;
+ }
+#endif
+
+ printk("}\n");
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * MakeIocReady - Get IOC to a READY state, using KickStart if needed.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @force: Force hard KickStart of IOC
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * Returns:
+ * 1 - DIAG reset and READY
+ * 0 - READY initially OR soft reset and READY
+ * -1 - Any failure on KickStart
+ * -2 - Msg Unit Reset Failed
+ * -3 - IO Unit Reset Failed
+ * -4 - IOC owned by a PEER
+ */
+static int
+MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
+{
+ u32 ioc_state;
+ int statefault = 0;
+ int cntdn;
+ int hard_reset_done = 0;
+ int r;
+ int ii;
+ int whoinit;
+
+ /* Get current [raw] IOC state */
+ ioc_state = mpt_GetIocState(ioc, 0);
+ dhsprintk((KERN_INFO MYNAM "::MakeIocReady, %s [raw] state=%08x\n", ioc->name, ioc_state));
+
+ /*
+ * Check to see if IOC got left/stuck in doorbell handshake
+ * grip of death. If so, hard reset the IOC.
+ */
+ if (ioc_state & MPI_DOORBELL_ACTIVE) {
+ statefault = 1;
+ printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n",
+ ioc->name);
+ }
+
+ /* Is it already READY? */
+ if (!statefault && (ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)
+ return 0;
+
+ /*
+ * Check to see if IOC is in FAULT state.
+ */
+ if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
+ statefault = 2;
+ printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n",
+ ioc->name);
+ printk(KERN_WARNING " FAULT code = %04xh\n",
+ ioc_state & MPI_DOORBELL_DATA_MASK);
+ }
+
+ /*
+ * Hmmm... Did it get left operational?
+ */
+ if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) {
+ dinitprintk((MYIOC_s_WARN_FMT "IOC operational unexpected\n",
+ ioc->name));
+
+ /* Check WhoInit.
+ * If PCI Peer, exit.
+ * Else, if no fault conditions are present, issue a MessageUnitReset
+ * Else, fall through to KickStart case
+ */
+ whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
+ dprintk((KERN_WARNING MYNAM
+ ": whoinit 0x%x\n statefault %d force %d\n",
+ whoinit, statefault, force));
+ if (whoinit == MPI_WHOINIT_PCI_PEER)
+ return -4;
+ else {
+ if ((statefault == 0 ) && (force == 0)) {
+ if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0)
+ return 0;
+ }
+ statefault = 3;
+ }
+ }
+
+ hard_reset_done = KickStart(ioc, statefault||force, sleepFlag);
+ if (hard_reset_done < 0)
+ return -1;
+
+ /*
+ * Loop here waiting for IOC to come READY.
+ */
+ ii = 0;
+ cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */
+
+ while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
+ if (ioc_state == MPI_IOC_STATE_OPERATIONAL) {
+ /*
+ * BIOS or previous driver load left IOC in OP state.
+ * Reset messaging FIFOs.
+ */
+ if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) {
+ printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name);
+ return -2;
+ }
+ } else if (ioc_state == MPI_IOC_STATE_RESET) {
+ /*
+ * Something is wrong. Try to get IOC back
+ * to a known state.
+ */
+ if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) {
+ printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name);
+ return -3;
+ }
+ }
+
+ ii++; cntdn--;
+ if (!cntdn) {
+ printk(MYIOC_s_ERR_FMT "Wait IOC_READY state timeout(%d)!\n",
+ ioc->name, (int)((ii+5)/HZ));
+ return -ETIME;
+ }
+
+ if (sleepFlag == CAN_SLEEP) {
+ msleep_interruptible(1);
+ } else {
+ mdelay (1); /* 1 msec delay */
+ }
+
+ }
+
+ if (statefault < 3) {
+ printk(MYIOC_s_INFO_FMT "Recovered from %s\n",
+ ioc->name,
+ statefault==1 ? "stuck handshake" : "IOC FAULT");
+ }
+
+ return hard_reset_done;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mpt_GetIocState - Get the current state of a MPT adapter.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @cooked: Request raw or cooked IOC state
+ *
+ * Returns all IOC Doorbell register bits if cooked==0, else just the
+ * Doorbell bits in MPI_IOC_STATE_MASK.
+ */
+u32
+mpt_GetIocState(MPT_ADAPTER *ioc, int cooked)
+{
+ u32 s, sc;
+
+ /* Get! */
+ s = CHIPREG_READ32(&ioc->chip->Doorbell);
+// dprintk((MYIOC_s_INFO_FMT "raw state = %08x\n", ioc->name, s));
+ sc = s & MPI_IOC_STATE_MASK;
+
+ /* Save! */
+ ioc->last_state = sc;
+
+ return cooked ? sc : s;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * GetIocFacts - Send IOCFacts request to MPT adapter.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @sleepFlag: Specifies whether the process can sleep
+ * @reason: If recovery, only update facts.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
+{
+ IOCFacts_t get_facts;
+ IOCFactsReply_t *facts;
+ int r;
+ int req_sz;
+ int reply_sz;
+ int sz;
+ u32 status, vv;
+ u8 shiftFactor=1;
+
+ /* IOC *must* NOT be in RESET state! */
+ if (ioc->last_state == MPI_IOC_STATE_RESET) {
+ printk(KERN_ERR MYNAM ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
+ ioc->name,
+ ioc->last_state );
+ return -44;
+ }
+
+ facts = &ioc->facts;
+
+ /* Destination (reply area)... */
+ reply_sz = sizeof(*facts);
+ memset(facts, 0, reply_sz);
+
+ /* Request area (get_facts on the stack right now!) */
+ req_sz = sizeof(get_facts);
+ memset(&get_facts, 0, req_sz);
+
+ get_facts.Function = MPI_FUNCTION_IOC_FACTS;
+ /* Assert: All other get_facts fields are zero! */
+
+ dinitprintk((MYIOC_s_INFO_FMT
+ "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
+ ioc->name, req_sz, reply_sz));
+
+ /* No non-zero fields in the get_facts request are greater than
+ * 1 byte in size, so we can just fire it off as is.
+ */
+ r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts,
+ reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag);
+ if (r != 0)
+ return r;
+
+ /*
+ * Now byte swap (GRRR) the necessary fields before any further
+ * inspection of reply contents.
+ *
+ * But need to do some sanity checks on MsgLength (byte) field
+ * to make sure we don't zero IOC's req_sz!
+ */
+ /* Did we get a valid reply? */
+ if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) {
+ if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
+ /*
+ * If not been here, done that, save off first WhoInit value
+ */
+ if (ioc->FirstWhoInit == WHOINIT_UNKNOWN)
+ ioc->FirstWhoInit = facts->WhoInit;
+ }
+
+ facts->MsgVersion = le16_to_cpu(facts->MsgVersion);
+ facts->MsgContext = le32_to_cpu(facts->MsgContext);
+ facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
+ facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
+ facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
+ status = facts->IOCStatus & MPI_IOCSTATUS_MASK;
+ /* CHECKME! IOCStatus, IOCLogInfo */
+
+ facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
+ facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize);
+
+ /*
+ * FC f/w version changed between 1.1 and 1.2
+ * Old: u16{Major(4),Minor(4),SubMinor(8)}
+ * New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
+ */
+ if (facts->MsgVersion < 0x0102) {
+ /*
+ * Handle old FC f/w style, convert to new...
+ */
+ u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion);
+ facts->FWVersion.Word =
+ ((oldv<<12) & 0xFF000000) |
+ ((oldv<<8) & 0x000FFF00);
+ } else
+ facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
+
+ facts->ProductID = le16_to_cpu(facts->ProductID);
+ facts->CurrentHostMfaHighAddr =
+ le32_to_cpu(facts->CurrentHostMfaHighAddr);
+ facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
+ facts->CurrentSenseBufferHighAddr =
+ le32_to_cpu(facts->CurrentSenseBufferHighAddr);
+ facts->CurReplyFrameSize =
+ le16_to_cpu(facts->CurReplyFrameSize);
+
+ /*
+ * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx
+ * Older MPI-1.00.xx struct had 13 dwords, and enlarged
+ * to 14 in MPI-1.01.0x.
+ */
+ if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
+ facts->MsgVersion > 0x0100) {
+ facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
+ }
+
+ sz = facts->FWImageSize;
+ if ( sz & 0x01 )
+ sz += 1;
+ if ( sz & 0x02 )
+ sz += 2;
+ facts->FWImageSize = sz;
+
+ if (!facts->RequestFrameSize) {
+ /* Something is wrong! */
+ printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
+ ioc->name);
+ return -55;
+ }
+
+ r = sz = le32_to_cpu(facts->BlockSize);
+ vv = ((63 / (sz * 4)) + 1) & 0x03;
+ ioc->NB_for_64_byte_frame = vv;
+ while ( sz )
+ {
+ shiftFactor++;
+ sz = sz >> 1;
+ }
+ ioc->NBShiftFactor = shiftFactor;
+ dinitprintk((MYIOC_s_INFO_FMT "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
+ ioc->name, vv, shiftFactor, r));
+
+ if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
+ /*
+ * Set values for this IOC's request & reply frame sizes,
+ * and request & reply queue depths...
+ */
+ ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4);
+ ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits);
+ ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
+ ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth);
+
+ dinitprintk((MYIOC_s_INFO_FMT "reply_sz=%3d, reply_depth=%4d\n",
+ ioc->name, ioc->reply_sz, ioc->reply_depth));
+ dinitprintk((MYIOC_s_INFO_FMT "req_sz =%3d, req_depth =%4d\n",
+ ioc->name, ioc->req_sz, ioc->req_depth));
+
+ /* Get port facts! */
+ if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 )
+ return r;
+ }
+ } else {
+ printk(MYIOC_s_ERR_FMT
+ "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n",
+ ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t,
+ RequestFrameSize)/sizeof(u32)));
+ return -66;
+ }
+
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * GetPortFacts - Send PortFacts request to MPT adapter.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @portnum: Port number
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
+{
+ PortFacts_t get_pfacts;
+ PortFactsReply_t *pfacts;
+ int ii;
+ int req_sz;
+ int reply_sz;
+
+ /* IOC *must* NOT be in RESET state! */
+ if (ioc->last_state == MPI_IOC_STATE_RESET) {
+ printk(KERN_ERR MYNAM ": ERROR - Can't get PortFacts, %s NOT READY! (%08x)\n",
+ ioc->name,
+ ioc->last_state );
+ return -4;
+ }
+
+ pfacts = &ioc->pfacts[portnum];
+
+ /* Destination (reply area)... */
+ reply_sz = sizeof(*pfacts);
+ memset(pfacts, 0, reply_sz);
+
+ /* Request area (get_pfacts on the stack right now!) */
+ req_sz = sizeof(get_pfacts);
+ memset(&get_pfacts, 0, req_sz);
+
+ get_pfacts.Function = MPI_FUNCTION_PORT_FACTS;
+ get_pfacts.PortNumber = portnum;
+ /* Assert: All other get_pfacts fields are zero! */
+
+ dinitprintk((MYIOC_s_INFO_FMT "Sending get PortFacts(%d) request\n",
+ ioc->name, portnum));
+
+ /* No non-zero fields in the get_pfacts request are greater than
+ * 1 byte in size, so we can just fire it off as is.
+ */
+ ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts,
+ reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag);
+ if (ii != 0)
+ return ii;
+
+ /* Did we get a valid reply? */
+
+ /* Now byte swap the necessary fields in the response. */
+ pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext);
+ pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus);
+ pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo);
+ pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices);
+ pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID);
+ pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags);
+ pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers);
+ pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs);
+ pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets);
+
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * SendIocInit - Send IOCInit request to MPT adapter.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
+{
+ IOCInit_t ioc_init;
+ MPIDefaultReply_t init_reply;
+ u32 state;
+ int r;
+ int count;
+ int cntdn;
+
+ memset(&ioc_init, 0, sizeof(ioc_init));
+ memset(&init_reply, 0, sizeof(init_reply));
+
+ ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER;
+ ioc_init.Function = MPI_FUNCTION_IOC_INIT;
+
+ /* If we are in a recovery mode and we uploaded the FW image,
+ * then this pointer is not NULL. Skip the upload a second time.
+ * Set this flag if cached_fw set for either IOC.
+ */
+ if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
+ ioc->upload_fw = 1;
+ else
+ ioc->upload_fw = 0;
+ ddlprintk((MYIOC_s_INFO_FMT "upload_fw %d facts.Flags=%x\n",
+ ioc->name, ioc->upload_fw, ioc->facts.Flags));
+
+ if (ioc->bus_type == FC)
+ ioc_init.MaxDevices = MPT_MAX_FC_DEVICES;
+ else
+ ioc_init.MaxDevices = MPT_MAX_SCSI_DEVICES;
+
+ ioc_init.MaxBuses = MPT_MAX_BUS;
+
+ ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */
+
+ if (sizeof(dma_addr_t) == sizeof(u64)) {
+ /* Save the upper 32-bits of the request
+ * (reply) and sense buffers.
+ */
+ ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32));
+ ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32));
+ } else {
+ /* Force 32-bit addressing */
+ ioc_init.HostMfaHighAddr = cpu_to_le32(0);
+ ioc_init.SenseBufferHighAddr = cpu_to_le32(0);
+ }
+
+ ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr;
+ ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr;
+
+ dhsprintk((MYIOC_s_INFO_FMT "Sending IOCInit (req @ %p)\n",
+ ioc->name, &ioc_init));
+
+ r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init,
+ sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag);
+ if (r != 0)
+ return r;
+
+ /* No need to byte swap the multibyte fields in the reply
+ * since we don't even look at it's contents.
+ */
+
+ dhsprintk((MYIOC_s_INFO_FMT "Sending PortEnable (req @ %p)\n",
+ ioc->name, &ioc_init));
+
+ if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0)
+ return r;
+
+ /* YIKES! SUPER IMPORTANT!!!
+ * Poll IocState until _OPERATIONAL while IOC is doing
+ * LoopInit and TargetDiscovery!
+ */
+ count = 0;
+ cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */
+ state = mpt_GetIocState(ioc, 1);
+ while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) {
+ if (sleepFlag == CAN_SLEEP) {
+ msleep_interruptible(1);
+ } else {
+ mdelay(1);
+ }
+
+ if (!cntdn) {
+ printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n",
+ ioc->name, (int)((count+5)/HZ));
+ return -9;
+ }
+
+ state = mpt_GetIocState(ioc, 1);
+ count++;
+ }
+ dhsprintk((MYIOC_s_INFO_FMT "INFO - Wait IOC_OPERATIONAL state (cnt=%d)\n",
+ ioc->name, count));
+
+ return r;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * SendPortEnable - Send PortEnable request to MPT adapter port.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @portnum: Port number to enable
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * Send PortEnable to bring IOC to OPERATIONAL state.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
+{
+ PortEnable_t port_enable;
+ MPIDefaultReply_t reply_buf;
+ int ii;
+ int req_sz;
+ int reply_sz;
+
+ /* Destination... */
+ reply_sz = sizeof(MPIDefaultReply_t);
+ memset(&reply_buf, 0, reply_sz);
+
+ req_sz = sizeof(PortEnable_t);
+ memset(&port_enable, 0, req_sz);
+
+ port_enable.Function = MPI_FUNCTION_PORT_ENABLE;
+ port_enable.PortNumber = portnum;
+/* port_enable.ChainOffset = 0; */
+/* port_enable.MsgFlags = 0; */
+/* port_enable.MsgContext = 0; */
+
+ dinitprintk((MYIOC_s_INFO_FMT "Sending Port(%d)Enable (req @ %p)\n",
+ ioc->name, portnum, &port_enable));
+
+ /* RAID FW may take a long time to enable
+ */
+ if (ioc->bus_type == FC) {
+ ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable,
+ reply_sz, (u16*)&reply_buf, 65 /*seconds*/, sleepFlag);
+ } else {
+ ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable,
+ reply_sz, (u16*)&reply_buf, 300 /*seconds*/, sleepFlag);
+ }
+
+ if (ii != 0)
+ return ii;
+
+ /* We do not even look at the reply, so we need not
+ * swap the multi-byte fields.
+ */
+
+ return 0;
+}
+
+/*
+ * ioc: Pointer to MPT_ADAPTER structure
+ * size - total FW bytes
+ */
+void
+mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
+{
+ if (ioc->cached_fw)
+ return; /* use already allocated memory */
+ if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
+ ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */
+ ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma;
+ } else {
+ if ( (ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma) ) )
+ ioc->alloc_total += size;
+ }
+}
+/*
+ * If alt_img is NULL, delete from ioc structure.
+ * Else, delete a secondary image in same format.
+ */
+void
+mpt_free_fw_memory(MPT_ADAPTER *ioc)
+{
+ int sz;
+
+ sz = ioc->facts.FWImageSize;
+ dinitprintk((KERN_WARNING MYNAM "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
+ ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
+ pci_free_consistent(ioc->pcidev, sz,
+ ioc->cached_fw, ioc->cached_fw_dma);
+ ioc->cached_fw = NULL;
+
+ return;
+}
+
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * Returns 0 for success, >0 for handshake failure
+ * <0 for fw upload failure.
+ *
+ * Remark: If bound IOC and a successful FWUpload was performed
+ * on the bound IOC, the second image is discarded
+ * and memory is free'd. Both channels must upload to prevent
+ * IOC from running in degraded mode.
+ */
+static int
+mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
+{
+ u8 request[ioc->req_sz];
+ u8 reply[sizeof(FWUploadReply_t)];
+ FWUpload_t *prequest;
+ FWUploadReply_t *preply;
+ FWUploadTCSGE_t *ptcsge;
+ int sgeoffset;
+ u32 flagsLength;
+ int ii, sz, reply_sz;
+ int cmdStatus;
+
+ /* If the image size is 0, we are done.
+ */
+ if ((sz = ioc->facts.FWImageSize) == 0)
+ return 0;
+
+ mpt_alloc_fw_memory(ioc, sz);
+
+ dinitprintk((KERN_WARNING MYNAM ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
+ ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
+
+ if (ioc->cached_fw == NULL) {
+ /* Major Failure.
+ */
+ return -ENOMEM;
+ }
+
+ prequest = (FWUpload_t *)&request;
+ preply = (FWUploadReply_t *)&reply;
+
+ /* Destination... */
+ memset(prequest, 0, ioc->req_sz);
+
+ reply_sz = sizeof(reply);
+ memset(preply, 0, reply_sz);
+
+ prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM;
+ prequest->Function = MPI_FUNCTION_FW_UPLOAD;
+
+ ptcsge = (FWUploadTCSGE_t *) &prequest->SGL;
+ ptcsge->DetailsLength = 12;
+ ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
+ ptcsge->ImageSize = cpu_to_le32(sz);
+
+ sgeoffset = sizeof(FWUpload_t) - sizeof(SGE_MPI_UNION) + sizeof(FWUploadTCSGE_t);
+
+ flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz;
+ mpt_add_sge(&request[sgeoffset], flagsLength, ioc->cached_fw_dma);
+
+ sgeoffset += sizeof(u32) + sizeof(dma_addr_t);
+ dinitprintk((KERN_WARNING MYNAM "Sending FW Upload (req @ %p) sgeoffset=%d \n",
+ prequest, sgeoffset));
+ DBG_DUMP_FW_REQUEST_FRAME(prequest)
+
+ ii = mpt_handshake_req_reply_wait(ioc, sgeoffset, (u32*)prequest,
+ reply_sz, (u16*)preply, 65 /*seconds*/, sleepFlag);
+
+ dinitprintk((KERN_WARNING MYNAM "FW Upload completed rc=%x \n", ii));
+
+ cmdStatus = -EFAULT;
+ if (ii == 0) {
+ /* Handshake transfer was complete and successful.
+ * Check the Reply Frame.
+ */
+ int status, transfer_sz;
+ status = le16_to_cpu(preply->IOCStatus);
+ if (status == MPI_IOCSTATUS_SUCCESS) {
+ transfer_sz = le32_to_cpu(preply->ActualImageSize);
+ if (transfer_sz == sz)
+ cmdStatus = 0;
+ }
+ }
+ dinitprintk((MYIOC_s_INFO_FMT ": do_upload status %d \n",
+ ioc->name, cmdStatus));
+
+
+ if (cmdStatus) {
+
+ ddlprintk((MYIOC_s_INFO_FMT ": fw upload failed, freeing image \n",
+ ioc->name));
+ mpt_free_fw_memory(ioc);
+ }
+
+ return cmdStatus;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mpt_downloadboot - DownloadBoot code
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @flag: Specify which part of IOC memory is to be uploaded.
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * FwDownloadBoot requires Programmed IO access.
+ *
+ * Returns 0 for success
+ * -1 FW Image size is 0
+ * -2 No valid cached_fw Pointer
+ * <0 for fw upload failure.
+ */
+static int
+mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag)
+{
+ MpiFwHeader_t *pFwHeader;
+ MpiExtImageHeader_t *pExtImage;
+ u32 fwSize;
+ u32 diag0val;
+ int count;
+ u32 *ptrFw;
+ u32 diagRwData;
+ u32 nextImage;
+ u32 load_addr;
+ u32 ioc_state=0;
+
+ ddlprintk((MYIOC_s_INFO_FMT "downloadboot: fw size 0x%x, ioc FW Ptr %p\n",
+ ioc->name, ioc->facts.FWImageSize, ioc->cached_fw));
+
+ if ( ioc->facts.FWImageSize == 0 )
+ return -1;
+
+ if (ioc->cached_fw == NULL)
+ return -2;
+
+ /* prevent a second downloadboot and memory free with alt_ioc */
+ if (ioc->alt_ioc && ioc->alt_ioc->cached_fw)
+ ioc->alt_ioc->cached_fw = NULL;
+
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
+
+ CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM));
+
+ /* wait 1 msec */
+ if (sleepFlag == CAN_SLEEP) {
+ msleep_interruptible(1);
+ } else {
+ mdelay (1);
+ }
+
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+ CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
+
+ for (count = 0; count < 30; count ++) {
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+ if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
+ ddlprintk((MYIOC_s_INFO_FMT "RESET_ADAPTER cleared, count=%d\n",
+ ioc->name, count));
+ break;
+ }
+ /* wait 1 sec */
+ if (sleepFlag == CAN_SLEEP) {
+ msleep_interruptible (1000);
+ } else {
+ mdelay (1000);
+ }
+ }
+
+ if ( count == 30 ) {
+ ddlprintk((MYIOC_s_INFO_FMT "downloadboot failed! Unable to RESET_ADAPTER diag0val=%x\n",
+ ioc->name, diag0val));
+ return -3;
+ }
+
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
+
+ /* Set the DiagRwEn and Disable ARM bits */
+ CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM));
+
+ pFwHeader = (MpiFwHeader_t *) ioc->cached_fw;
+ fwSize = (pFwHeader->ImageSize + 3)/4;
+ ptrFw = (u32 *) pFwHeader;
+
+ /* Write the LoadStartAddress to the DiagRw Address Register
+ * using Programmed IO
+ */
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress);
+ ddlprintk((MYIOC_s_INFO_FMT "LoadStart addr written 0x%x \n",
+ ioc->name, pFwHeader->LoadStartAddress));
+
+ ddlprintk((MYIOC_s_INFO_FMT "Write FW Image: 0x%x bytes @ %p\n",
+ ioc->name, fwSize*4, ptrFw));
+ while (fwSize--) {
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
+ }
+
+ nextImage = pFwHeader->NextImageHeaderOffset;
+ while (nextImage) {
+ pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage);
+
+ load_addr = pExtImage->LoadStartAddress;
+
+ fwSize = (pExtImage->ImageSize + 3) >> 2;
+ ptrFw = (u32 *)pExtImage;
+
+ ddlprintk((MYIOC_s_INFO_FMT "Write Ext Image: 0x%x bytes @ %p load_addr=%x\n",
+ ioc->name, fwSize*4, ptrFw, load_addr));
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);
+
+ while (fwSize--) {
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
+ }
+ nextImage = pExtImage->NextImageHeaderOffset;
+ }
+
+ /* Write the IopResetVectorRegAddr */
+ ddlprintk((MYIOC_s_INFO_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr));
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr);
+
+ /* Write the IopResetVectorValue */
+ ddlprintk((MYIOC_s_INFO_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue));
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue);
+
+ /* Clear the internal flash bad bit - autoincrementing register,
+ * so must do two writes.
+ */
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
+ diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData);
+ diagRwData |= 0x4000000;
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData);
+
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+ ddlprintk((MYIOC_s_INFO_FMT "downloadboot diag0val=%x, turning off PREVENT_IOC_BOOT, DISABLE_ARM\n",
+ ioc->name, diag0val));
+ diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM);
+ ddlprintk((MYIOC_s_INFO_FMT "downloadboot now diag0val=%x\n",
+ ioc->name, diag0val));
+ CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
+
+ /* Write 0xFF to reset the sequencer */
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
+
+ for (count=0; count<HZ*20; count++) {
+ if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) {
+ ddlprintk((MYIOC_s_INFO_FMT "downloadboot successful! (count=%d) IocState=%x\n",
+ ioc->name, count, ioc_state));
+ if ((SendIocInit(ioc, sleepFlag)) != 0) {
+ ddlprintk((MYIOC_s_INFO_FMT "downloadboot: SendIocInit failed\n",
+ ioc->name));
+ return -EFAULT;
+ }
+ ddlprintk((MYIOC_s_INFO_FMT "downloadboot: SendIocInit successful\n",
+ ioc->name));
+ return 0;
+ }
+ if (sleepFlag == CAN_SLEEP) {
+ msleep_interruptible (10);
+ } else {
+ mdelay (10);
+ }
+ }
+ ddlprintk((MYIOC_s_INFO_FMT "downloadboot failed! IocState=%x\n",
+ ioc->name, ioc_state));
+ return -EFAULT;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * KickStart - Perform hard reset of MPT adapter.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @force: Force hard reset
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * This routine places MPT adapter in diagnostic mode via the
+ * WriteSequence register, and then performs a hard reset of adapter
+ * via the Diagnostic register.
+ *
+ * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread)
+ * or NO_SLEEP (interrupt thread, use mdelay)
+ * force - 1 if doorbell active, board fault state
+ * board operational, IOC_RECOVERY or
+ * IOC_BRINGUP and there is an alt_ioc.
+ * 0 else
+ *
+ * Returns:
+ * 1 - hard reset, READY
+ * 0 - no reset due to History bit, READY
+ * -1 - no reset due to History bit but not READY
+ * OR reset but failed to come READY
+ * -2 - no reset, could not enter DIAG mode
+ * -3 - reset but bad FW bit
+ */
+static int
+KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
+{
+ int hard_reset_done = 0;
+ u32 ioc_state=0;
+ int cnt,cntdn;
+
+ dinitprintk((KERN_WARNING MYNAM ": KickStarting %s!\n", ioc->name));
+ if (ioc->bus_type == SCSI) {
+ /* Always issue a Msg Unit Reset first. This will clear some
+ * SCSI bus hang conditions.
+ */
+ SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
+
+ if (sleepFlag == CAN_SLEEP) {
+ msleep_interruptible (1000);
+ } else {
+ mdelay (1000);
+ }
+ }
+
+ hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag);
+ if (hard_reset_done < 0)
+ return hard_reset_done;
+
+ dinitprintk((MYIOC_s_INFO_FMT "Diagnostic reset successful!\n",
+ ioc->name));
+
+ cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */
+ for (cnt=0; cnt<cntdn; cnt++) {
+ ioc_state = mpt_GetIocState(ioc, 1);
+ if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) {
+ dinitprintk((MYIOC_s_INFO_FMT "KickStart successful! (cnt=%d)\n",
+ ioc->name, cnt));
+ return hard_reset_done;
+ }
+ if (sleepFlag == CAN_SLEEP) {
+ msleep_interruptible (10);
+ } else {
+ mdelay (10);
+ }
+ }
+
+ printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n",
+ ioc->name, ioc_state);
+ return -1;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mpt_diag_reset - Perform hard reset of the adapter.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @ignore: Set if to honor and clear to ignore
+ * the reset history bit
+ * @sleepflag: CAN_SLEEP if called in a non-interrupt thread,
+ * else set to NO_SLEEP (use mdelay instead)
+ *
+ * This routine places the adapter in diagnostic mode via the
+ * WriteSequence register and then performs a hard reset of adapter
+ * via the Diagnostic register. Adapter should be in ready state
+ * upon successful completion.
+ *
+ * Returns: 1 hard reset successful
+ * 0 no reset performed because reset history bit set
+ * -2 enabling diagnostic mode failed
+ * -3 diagnostic reset failed
+ */
+static int
+mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
+{
+ u32 diag0val;
+ u32 doorbell;
+ int hard_reset_done = 0;
+ int count = 0;
+#ifdef MPT_DEBUG
+ u32 diag1val = 0;
+#endif
+
+ /* Clear any existing interrupts */
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
+ /* Use "Diagnostic reset" method! (only thing available!) */
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+
+#ifdef MPT_DEBUG
+ if (ioc->alt_ioc)
+ diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
+ dprintk((MYIOC_s_INFO_FMT "DbG1: diag0=%08x, diag1=%08x\n",
+ ioc->name, diag0val, diag1val));
+#endif
+
+ /* Do the reset if we are told to ignore the reset history
+ * or if the reset history is 0
+ */
+ if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) {
+ while ((diag0val & MPI_DIAG_DRWE) == 0) {
+ /* Write magic sequence to WriteSequence register
+ * Loop until in diagnostic mode
+ */
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
+
+ /* wait 100 msec */
+ if (sleepFlag == CAN_SLEEP) {
+ msleep_interruptible (100);
+ } else {
+ mdelay (100);
+ }
+
+ count++;
+ if (count > 20) {
+ printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
+ ioc->name, diag0val);
+ return -2;
+
+ }
+
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+
+ dprintk((MYIOC_s_INFO_FMT "Wrote magic DiagWriteEn sequence (%x)\n",
+ ioc->name, diag0val));
+ }
+
+#ifdef MPT_DEBUG
+ if (ioc->alt_ioc)
+ diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
+ dprintk((MYIOC_s_INFO_FMT "DbG2: diag0=%08x, diag1=%08x\n",
+ ioc->name, diag0val, diag1val));
+#endif
+ /*
+ * Disable the ARM (Bug fix)
+ *
+ */
+ CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
+ mdelay (1);
+
+ /*
+ * Now hit the reset bit in the Diagnostic register
+ * (THE BIG HAMMER!) (Clears DRWE bit).
+ */
+ CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
+ hard_reset_done = 1;
+ dprintk((MYIOC_s_INFO_FMT "Diagnostic reset performed\n",
+ ioc->name));
+
+ /*
+ * Call each currently registered protocol IOC reset handler
+ * with pre-reset indication.
+ * NOTE: If we're doing _IOC_BRINGUP, there can be no
+ * MptResetHandlers[] registered yet.
+ */
+ {
+ int ii;
+ int r = 0;
+
+ for (ii=MPT_MAX_PROTOCOL_DRIVERS-1; ii; ii--) {
+ if (MptResetHandlers[ii]) {
+ dprintk((MYIOC_s_INFO_FMT "Calling IOC pre_reset handler #%d\n",
+ ioc->name, ii));
+ r += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_PRE_RESET);
+ if (ioc->alt_ioc) {
+ dprintk((MYIOC_s_INFO_FMT "Calling alt-%s pre_reset handler #%d\n",
+ ioc->name, ioc->alt_ioc->name, ii));
+ r += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_PRE_RESET);
+ }
+ }
+ }
+ /* FIXME? Examine results here? */
+ }
+
+ if (ioc->cached_fw) {
+ /* If the DownloadBoot operation fails, the
+ * IOC will be left unusable. This is a fatal error
+ * case. _diag_reset will return < 0
+ */
+ for (count = 0; count < 30; count ++) {
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+ if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
+ break;
+ }
+
+ /* wait 1 sec */
+ if (sleepFlag == CAN_SLEEP) {
+ ssleep(1);
+ } else {
+ mdelay (1000);
+ }
+ }
+ if ((count = mpt_downloadboot(ioc, sleepFlag)) < 0) {
+ printk(KERN_WARNING MYNAM
+ ": firmware downloadboot failure (%d)!\n", count);
+ }
+
+ } else {
+ /* Wait for FW to reload and for board
+ * to go to the READY state.
+ * Maximum wait is 60 seconds.
+ * If fail, no error will check again
+ * with calling program.
+ */
+ for (count = 0; count < 60; count ++) {
+ doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
+ doorbell &= MPI_IOC_STATE_MASK;
+
+ if (doorbell == MPI_IOC_STATE_READY) {
+ break;
+ }
+
+ /* wait 1 sec */
+ if (sleepFlag == CAN_SLEEP) {
+ msleep_interruptible (1000);
+ } else {
+ mdelay (1000);
+ }
+ }
+ }
+ }
+
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+#ifdef MPT_DEBUG
+ if (ioc->alt_ioc)
+ diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
+ dprintk((MYIOC_s_INFO_FMT "DbG3: diag0=%08x, diag1=%08x\n",
+ ioc->name, diag0val, diag1val));
+#endif
+
+ /* Clear RESET_HISTORY bit! Place board in the
+ * diagnostic mode to update the diag register.
+ */
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+ count = 0;
+ while ((diag0val & MPI_DIAG_DRWE) == 0) {
+ /* Write magic sequence to WriteSequence register
+ * Loop until in diagnostic mode
+ */
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
+
+ /* wait 100 msec */
+ if (sleepFlag == CAN_SLEEP) {
+ msleep_interruptible (100);
+ } else {
+ mdelay (100);
+ }
+
+ count++;
+ if (count > 20) {
+ printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
+ ioc->name, diag0val);
+ break;
+ }
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+ }
+ diag0val &= ~MPI_DIAG_RESET_HISTORY;
+ CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+ if (diag0val & MPI_DIAG_RESET_HISTORY) {
+ printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n",
+ ioc->name);
+ }
+
+ /* Disable Diagnostic Mode
+ */
+ CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF);
+
+ /* Check FW reload status flags.
+ */
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+ if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) {
+ printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n",
+ ioc->name, diag0val);
+ return -3;
+ }
+
+#ifdef MPT_DEBUG
+ if (ioc->alt_ioc)
+ diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
+ dprintk((MYIOC_s_INFO_FMT "DbG4: diag0=%08x, diag1=%08x\n",
+ ioc->name, diag0val, diag1val));
+#endif
+
+ /*
+ * Reset flag that says we've enabled event notification
+ */
+ ioc->facts.EventState = 0;
+
+ if (ioc->alt_ioc)
+ ioc->alt_ioc->facts.EventState = 0;
+
+ return hard_reset_done;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * SendIocReset - Send IOCReset request to MPT adapter.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @reset_type: reset type, expected values are
+ * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET
+ *
+ * Send IOCReset request to the MPT adapter.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
+{
+ int r;
+ u32 state;
+ int cntdn, count;
+
+ drsprintk((KERN_WARNING MYNAM ": %s: Sending IOC reset(0x%02x)!\n",
+ ioc->name, reset_type));
+ CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
+ if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
+ return r;
+
+ /* FW ACK'd request, wait for READY state
+ */
+ count = 0;
+ cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */
+
+ while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
+ cntdn--;
+ count++;
+ if (!cntdn) {
+ if (sleepFlag != CAN_SLEEP)
+ count *= 10;
+
+ printk(KERN_ERR MYNAM ": %s: ERROR - Wait IOC_READY state timeout(%d)!\n",
+ ioc->name, (int)((count+5)/HZ));
+ return -ETIME;
+ }
+
+ if (sleepFlag == CAN_SLEEP) {
+ msleep_interruptible(1);
+ } else {
+ mdelay (1); /* 1 msec delay */
+ }
+ }
+
+ /* TODO!
+ * Cleanup all event stuff for this IOC; re-issue EventNotification
+ * request if needed.
+ */
+ if (ioc->facts.Function)
+ ioc->facts.EventState = 0;
+
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * initChainBuffers - Allocate memory for and initialize
+ * chain buffers, chain buffer control arrays and spinlock.
+ * @hd: Pointer to MPT_SCSI_HOST structure
+ * @init: If set, initialize the spin lock.
+ */
+static int
+initChainBuffers(MPT_ADAPTER *ioc)
+{
+ u8 *mem;
+ int sz, ii, num_chain;
+ int scale, num_sge, numSGE;
+
+ /* ReqToChain size must equal the req_depth
+ * index = req_idx
+ */
+ if (ioc->ReqToChain == NULL) {
+ sz = ioc->req_depth * sizeof(int);
+ mem = kmalloc(sz, GFP_ATOMIC);
+ if (mem == NULL)
+ return -1;
+
+ ioc->ReqToChain = (int *) mem;
+ dinitprintk((KERN_INFO MYNAM ": %s ReqToChain alloc @ %p, sz=%d bytes\n",
+ ioc->name, mem, sz));
+ mem = kmalloc(sz, GFP_ATOMIC);
+ if (mem == NULL)
+ return -1;
+
+ ioc->RequestNB = (int *) mem;
+ dinitprintk((KERN_INFO MYNAM ": %s RequestNB alloc @ %p, sz=%d bytes\n",
+ ioc->name, mem, sz));
+ }
+ for (ii = 0; ii < ioc->req_depth; ii++) {
+ ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN;
+ }
+
+ /* ChainToChain size must equal the total number
+ * of chain buffers to be allocated.
+ * index = chain_idx
+ *
+ * Calculate the number of chain buffers needed(plus 1) per I/O
+ * then multiply the the maximum number of simultaneous cmds
+ *
+ * num_sge = num sge in request frame + last chain buffer
+ * scale = num sge per chain buffer if no chain element
+ */
+ scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
+ if (sizeof(dma_addr_t) == sizeof(u64))
+ num_sge = scale + (ioc->req_sz - 60) / (sizeof(dma_addr_t) + sizeof(u32));
+ else
+ num_sge = 1+ scale + (ioc->req_sz - 64) / (sizeof(dma_addr_t) + sizeof(u32));
+
+ if (sizeof(dma_addr_t) == sizeof(u64)) {
+ numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
+ (ioc->req_sz - 60) / (sizeof(dma_addr_t) + sizeof(u32));
+ } else {
+ numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
+ (ioc->req_sz - 64) / (sizeof(dma_addr_t) + sizeof(u32));
+ }
+ dinitprintk((KERN_INFO MYNAM ": %s num_sge=%d numSGE=%d\n",
+ ioc->name, num_sge, numSGE));
+
+ if ( numSGE > MPT_SCSI_SG_DEPTH )
+ numSGE = MPT_SCSI_SG_DEPTH;
+
+ num_chain = 1;
+ while (numSGE - num_sge > 0) {
+ num_chain++;
+ num_sge += (scale - 1);
+ }
+ num_chain++;
+
+ dinitprintk((KERN_INFO MYNAM ": %s Now numSGE=%d num_sge=%d num_chain=%d\n",
+ ioc->name, numSGE, num_sge, num_chain));
+
+ if (ioc->bus_type == SCSI)
+ num_chain *= MPT_SCSI_CAN_QUEUE;
+ else
+ num_chain *= MPT_FC_CAN_QUEUE;
+
+ ioc->num_chain = num_chain;
+
+ sz = num_chain * sizeof(int);
+ if (ioc->ChainToChain == NULL) {
+ mem = kmalloc(sz, GFP_ATOMIC);
+ if (mem == NULL)
+ return -1;
+
+ ioc->ChainToChain = (int *) mem;
+ dinitprintk((KERN_INFO MYNAM ": %s ChainToChain alloc @ %p, sz=%d bytes\n",
+ ioc->name, mem, sz));
+ } else {
+ mem = (u8 *) ioc->ChainToChain;
+ }
+ memset(mem, 0xFF, sz);
+ return num_chain;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * PrimeIocFifos - Initialize IOC request and reply FIFOs.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ *
+ * This routine allocates memory for the MPT reply and request frame
+ * pools (if necessary), and primes the IOC reply FIFO with
+ * reply frames.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+PrimeIocFifos(MPT_ADAPTER *ioc)
+{
+ MPT_FRAME_HDR *mf;
+ unsigned long flags;
+ dma_addr_t alloc_dma;
+ u8 *mem;
+ int i, reply_sz, sz, total_size, num_chain;
+
+ /* Prime reply FIFO... */
+
+ if (ioc->reply_frames == NULL) {
+ if ( (num_chain = initChainBuffers(ioc)) < 0)
+ return -1;
+
+ total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth);
+ dinitprintk((KERN_INFO MYNAM ": %s.ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
+ ioc->name, ioc->reply_sz, ioc->reply_depth));
+ dinitprintk((KERN_INFO MYNAM ": %s.ReplyBuffer sz=%d[%x] bytes\n",
+ ioc->name, reply_sz, reply_sz));
+
+ sz = (ioc->req_sz * ioc->req_depth);
+ dinitprintk((KERN_INFO MYNAM ": %s.RequestBuffer sz=%d bytes, RequestDepth=%d\n",
+ ioc->name, ioc->req_sz, ioc->req_depth));
+ dinitprintk((KERN_INFO MYNAM ": %s.RequestBuffer sz=%d[%x] bytes\n",
+ ioc->name, sz, sz));
+ total_size += sz;
+
+ sz = num_chain * ioc->req_sz; /* chain buffer pool size */
+ dinitprintk((KERN_INFO MYNAM ": %s.ChainBuffer sz=%d bytes, ChainDepth=%d\n",
+ ioc->name, ioc->req_sz, num_chain));
+ dinitprintk((KERN_INFO MYNAM ": %s.ChainBuffer sz=%d[%x] bytes num_chain=%d\n",
+ ioc->name, sz, sz, num_chain));
+
+ total_size += sz;
+ mem = pci_alloc_consistent(ioc->pcidev, total_size, &alloc_dma);
+ if (mem == NULL) {
+ printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n",
+ ioc->name);
+ goto out_fail;
+ }
+
+ dinitprintk((KERN_INFO MYNAM ": %s.Total alloc @ %p[%p], sz=%d[%x] bytes\n",
+ ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size));
+
+ memset(mem, 0, total_size);
+ ioc->alloc_total += total_size;
+ ioc->alloc = mem;
+ ioc->alloc_dma = alloc_dma;
+ ioc->alloc_sz = total_size;
+ ioc->reply_frames = (MPT_FRAME_HDR *) mem;
+ ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
+
+ alloc_dma += reply_sz;
+ mem += reply_sz;
+
+ /* Request FIFO - WE manage this! */
+
+ ioc->req_frames = (MPT_FRAME_HDR *) mem;
+ ioc->req_frames_dma = alloc_dma;
+
+ dinitprintk((KERN_INFO MYNAM ": %s.RequestBuffers @ %p[%p]\n",
+ ioc->name, mem, (void *)(ulong)alloc_dma));
+
+ ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
+
+#if defined(CONFIG_MTRR) && 0
+ /*
+ * Enable Write Combining MTRR for IOC's memory region.
+ * (at least as much as we can; "size and base must be
+ * multiples of 4 kiB"
+ */
+ ioc->mtrr_reg = mtrr_add(ioc->req_frames_dma,
+ sz,
+ MTRR_TYPE_WRCOMB, 1);
+ dprintk((MYIOC_s_INFO_FMT "MTRR region registered (base:size=%08x:%x)\n",
+ ioc->name, ioc->req_frames_dma, sz));
+#endif
+
+ for (i = 0; i < ioc->req_depth; i++) {
+ alloc_dma += ioc->req_sz;
+ mem += ioc->req_sz;
+ }
+
+ ioc->ChainBuffer = mem;
+ ioc->ChainBufferDMA = alloc_dma;
+
+ dinitprintk((KERN_INFO MYNAM " :%s.ChainBuffers @ %p(%p)\n",
+ ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA));
+
+ /* Initialize the free chain Q.
+ */
+
+ INIT_LIST_HEAD(&ioc->FreeChainQ);
+
+ /* Post the chain buffers to the FreeChainQ.
+ */
+ mem = (u8 *)ioc->ChainBuffer;
+ for (i=0; i < num_chain; i++) {
+ mf = (MPT_FRAME_HDR *) mem;
+ list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ);
+ mem += ioc->req_sz;
+ }
+
+ /* Initialize Request frames linked list
+ */
+ alloc_dma = ioc->req_frames_dma;
+ mem = (u8 *) ioc->req_frames;
+
+ spin_lock_irqsave(&ioc->FreeQlock, flags);
+ INIT_LIST_HEAD(&ioc->FreeQ);
+ for (i = 0; i < ioc->req_depth; i++) {
+ mf = (MPT_FRAME_HDR *) mem;
+
+ /* Queue REQUESTs *internally*! */
+ list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
+
+ mem += ioc->req_sz;
+ }
+ spin_unlock_irqrestore(&ioc->FreeQlock, flags);
+
+ sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
+ ioc->sense_buf_pool =
+ pci_alloc_consistent(ioc->pcidev, sz, &ioc->sense_buf_pool_dma);
+ if (ioc->sense_buf_pool == NULL) {
+ printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n",
+ ioc->name);
+ goto out_fail;
+ }
+
+ ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF);
+ ioc->alloc_total += sz;
+ dinitprintk((KERN_INFO MYNAM ": %s.SenseBuffers @ %p[%p]\n",
+ ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma));
+
+ }
+
+ /* Post Reply frames to FIFO
+ */
+ alloc_dma = ioc->alloc_dma;
+ dinitprintk((KERN_INFO MYNAM ": %s.ReplyBuffers @ %p[%p]\n",
+ ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
+
+ for (i = 0; i < ioc->reply_depth; i++) {
+ /* Write each address to the IOC! */
+ CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma);
+ alloc_dma += ioc->reply_sz;
+ }
+
+ return 0;
+
+out_fail:
+ if (ioc->alloc != NULL) {
+ sz = ioc->alloc_sz;
+ pci_free_consistent(ioc->pcidev,
+ sz,
+ ioc->alloc, ioc->alloc_dma);
+ ioc->reply_frames = NULL;
+ ioc->req_frames = NULL;
+ ioc->alloc_total -= sz;
+ }
+ if (ioc->sense_buf_pool != NULL) {
+ sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
+ pci_free_consistent(ioc->pcidev,
+ sz,
+ ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
+ ioc->sense_buf_pool = NULL;
+ }
+ return -1;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_handshake_req_reply_wait - Send MPT request to and receive reply
+ * from IOC via doorbell handshake method.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @reqBytes: Size of the request in bytes
+ * @req: Pointer to MPT request frame
+ * @replyBytes: Expected size of the reply in bytes
+ * @u16reply: Pointer to area where reply should be written
+ * @maxwait: Max wait time for a reply (in seconds)
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * NOTES: It is the callers responsibility to byte-swap fields in the
+ * request which are greater than 1 byte in size. It is also the
+ * callers responsibility to byte-swap response fields which are
+ * greater than 1 byte in size.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
+ int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
+{
+ MPIDefaultReply_t *mptReply;
+ int failcnt = 0;
+ int t;
+
+ /*
+ * Get ready to cache a handshake reply
+ */
+ ioc->hs_reply_idx = 0;
+ mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
+ mptReply->MsgLength = 0;
+
+ /*
+ * Make sure there are no doorbells (WRITE 0 to IntStatus reg),
+ * then tell IOC that we want to handshake a request of N words.
+ * (WRITE u32val to Doorbell reg).
+ */
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+ CHIPREG_WRITE32(&ioc->chip->Doorbell,
+ ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
+ ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
+
+ /*
+ * Wait for IOC's doorbell handshake int
+ */
+ if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
+ failcnt++;
+
+ dhsprintk((MYIOC_s_INFO_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n",
+ ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
+
+ /* Read doorbell and check for active bit */
+ if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
+ return -1;
+
+ /*
+ * Clear doorbell int (WRITE 0 to IntStatus reg),
+ * then wait for IOC to ACKnowledge that it's ready for
+ * our handshake request.
+ */
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+ if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
+ failcnt++;
+
+ if (!failcnt) {
+ int ii;
+ u8 *req_as_bytes = (u8 *) req;
+
+ /*
+ * Stuff request words via doorbell handshake,
+ * with ACK from IOC for each.
+ */
+ for (ii = 0; !failcnt && ii < reqBytes/4; ii++) {
+ u32 word = ((req_as_bytes[(ii*4) + 0] << 0) |
+ (req_as_bytes[(ii*4) + 1] << 8) |
+ (req_as_bytes[(ii*4) + 2] << 16) |
+ (req_as_bytes[(ii*4) + 3] << 24));
+
+ CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
+ if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
+ failcnt++;
+ }
+
+ dhsprintk((KERN_INFO MYNAM ": Handshake request frame (@%p) header\n", req));
+ DBG_DUMP_REQUEST_FRAME_HDR(req)
+
+ dhsprintk((MYIOC_s_INFO_FMT "HandShake request post done, WaitCnt=%d%s\n",
+ ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : ""));
+
+ /*
+ * Wait for completion of doorbell handshake reply from the IOC
+ */
+ if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0)
+ failcnt++;
+
+ dhsprintk((MYIOC_s_INFO_FMT "HandShake reply count=%d%s\n",
+ ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : ""));
+
+ /*
+ * Copy out the cached reply...
+ */
+ for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++)
+ u16reply[ii] = ioc->hs_reply[ii];
+ } else {
+ return -99;
+ }
+
+ return -failcnt;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * WaitForDoorbellAck - Wait for IOC to clear the IOP_DOORBELL_STATUS bit
+ * in it's IntStatus register.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @howlong: How long to wait (in seconds)
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * This routine waits (up to ~2 seconds max) for IOC doorbell
+ * handshake ACKnowledge.
+ *
+ * Returns a negative value on failure, else wait loop count.
+ */
+static int
+WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
+{
+ int cntdn;
+ int count = 0;
+ u32 intstat=0;
+
+ cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * howlong;
+
+ if (sleepFlag == CAN_SLEEP) {
+ while (--cntdn) {
+ intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
+ if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
+ break;
+ msleep_interruptible (1);
+ count++;
+ }
+ } else {
+ while (--cntdn) {
+ intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
+ if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
+ break;
+ mdelay (1);
+ count++;
+ }
+ }
+
+ if (cntdn) {
+ dprintk((MYIOC_s_INFO_FMT "WaitForDoorbell ACK (count=%d)\n",
+ ioc->name, count));
+ return count;
+ }
+
+ printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n",
+ ioc->name, count, intstat);
+ return -1;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * WaitForDoorbellInt - Wait for IOC to set the HIS_DOORBELL_INTERRUPT bit
+ * in it's IntStatus register.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @howlong: How long to wait (in seconds)
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt.
+ *
+ * Returns a negative value on failure, else wait loop count.
+ */
+static int
+WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
+{
+ int cntdn;
+ int count = 0;
+ u32 intstat=0;
+
+ cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * howlong;
+ if (sleepFlag == CAN_SLEEP) {
+ while (--cntdn) {
+ intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
+ if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
+ break;
+ msleep_interruptible(1);
+ count++;
+ }
+ } else {
+ while (--cntdn) {
+ intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
+ if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
+ break;
+ mdelay(1);
+ count++;
+ }
+ }
+
+ if (cntdn) {
+ dprintk((MYIOC_s_INFO_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n",
+ ioc->name, count, howlong));
+ return count;
+ }
+
+ printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n",
+ ioc->name, count, intstat);
+ return -1;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * WaitForDoorbellReply - Wait for and capture a IOC handshake reply.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @howlong: How long to wait (in seconds)
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * This routine polls the IOC for a handshake reply, 16 bits at a time.
+ * Reply is cached to IOC private area large enough to hold a maximum
+ * of 128 bytes of reply data.
+ *
+ * Returns a negative value on failure, else size of reply in WORDS.
+ */
+static int
+WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
+{
+ int u16cnt = 0;
+ int failcnt = 0;
+ int t;
+ u16 *hs_reply = ioc->hs_reply;
+ volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
+ u16 hword;
+
+ hs_reply[0] = hs_reply[1] = hs_reply[7] = 0;
+
+ /*
+ * Get first two u16's so we can look at IOC's intended reply MsgLength
+ */
+ u16cnt=0;
+ if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) {
+ failcnt++;
+ } else {
+ hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+ if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
+ failcnt++;
+ else {
+ hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+ }
+ }
+
+ dhsprintk((MYIOC_s_INFO_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
+ ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
+ failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
+
+ /*
+ * If no error (and IOC said MsgLength is > 0), piece together
+ * reply 16 bits at a time.
+ */
+ for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) {
+ if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
+ failcnt++;
+ hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
+ /* don't overflow our IOC hs_reply[] buffer! */
+ if (u16cnt < sizeof(ioc->hs_reply) / sizeof(ioc->hs_reply[0]))
+ hs_reply[u16cnt] = hword;
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+ }
+
+ if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
+ failcnt++;
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
+ if (failcnt) {
+ printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n",
+ ioc->name);
+ return -failcnt;
+ }
+#if 0
+ else if (u16cnt != (2 * mptReply->MsgLength)) {
+ return -101;
+ }
+ else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
+ return -102;
+ }
+#endif
+
+ dhsprintk((MYIOC_s_INFO_FMT "Got Handshake reply:\n", ioc->name));
+ DBG_DUMP_REPLY_FRAME(mptReply)
+
+ dhsprintk((MYIOC_s_INFO_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n",
+ ioc->name, t, u16cnt/2));
+ return u16cnt/2;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * GetLanConfigPages - Fetch LANConfig pages.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ *
+ * Return: 0 for success
+ * -ENOMEM if no memory available
+ * -EPERM if not allowed due to ISR context
+ * -EAGAIN if no msg frames currently available
+ * -EFAULT for non-successful reply or no reply (timeout)
+ */
+static int
+GetLanConfigPages(MPT_ADAPTER *ioc)
+{
+ ConfigPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ LANPage0_t *ppage0_alloc;
+ dma_addr_t page0_dma;
+ LANPage1_t *ppage1_alloc;
+ dma_addr_t page1_dma;
+ int rc = 0;
+ int data_sz;
+ int copy_sz;
+
+ /* Get LAN Page 0 header */
+ hdr.PageVersion = 0;
+ hdr.PageLength = 0;
+ hdr.PageNumber = 0;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
+ cfg.hdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.pageAddr = 0;
+ cfg.timeout = 0;
+
+ if ((rc = mpt_config(ioc, &cfg)) != 0)
+ return rc;
+
+ if (hdr.PageLength > 0) {
+ data_sz = hdr.PageLength * 4;
+ ppage0_alloc = (LANPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
+ rc = -ENOMEM;
+ if (ppage0_alloc) {
+ memset((u8 *)ppage0_alloc, 0, data_sz);
+ cfg.physAddr = page0_dma;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ if ((rc = mpt_config(ioc, &cfg)) == 0) {
+ /* save the data */
+ copy_sz = min_t(int, sizeof(LANPage0_t), data_sz);
+ memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz);
+
+ }
+
+ pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
+
+ /* FIXME!
+ * Normalize endianness of structure data,
+ * by byte-swapping all > 1 byte fields!
+ */
+
+ }
+
+ if (rc)
+ return rc;
+ }
+
+ /* Get LAN Page 1 header */
+ hdr.PageVersion = 0;
+ hdr.PageLength = 0;
+ hdr.PageNumber = 1;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
+ cfg.hdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.pageAddr = 0;
+
+ if ((rc = mpt_config(ioc, &cfg)) != 0)
+ return rc;
+
+ if (hdr.PageLength == 0)
+ return 0;
+
+ data_sz = hdr.PageLength * 4;
+ rc = -ENOMEM;
+ ppage1_alloc = (LANPage1_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page1_dma);
+ if (ppage1_alloc) {
+ memset((u8 *)ppage1_alloc, 0, data_sz);
+ cfg.physAddr = page1_dma;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ if ((rc = mpt_config(ioc, &cfg)) == 0) {
+ /* save the data */
+ copy_sz = min_t(int, sizeof(LANPage1_t), data_sz);
+ memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz);
+ }
+
+ pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage1_alloc, page1_dma);
+
+ /* FIXME!
+ * Normalize endianness of structure data,
+ * by byte-swapping all > 1 byte fields!
+ */
+
+ }
+
+ return rc;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * GetFcPortPage0 - Fetch FCPort config Page0.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @portnum: IOC Port number
+ *
+ * Return: 0 for success
+ * -ENOMEM if no memory available
+ * -EPERM if not allowed due to ISR context
+ * -EAGAIN if no msg frames currently available
+ * -EFAULT for non-successful reply or no reply (timeout)
+ */
+static int
+GetFcPortPage0(MPT_ADAPTER *ioc, int portnum)
+{
+ ConfigPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ FCPortPage0_t *ppage0_alloc;
+ FCPortPage0_t *pp0dest;
+ dma_addr_t page0_dma;
+ int data_sz;
+ int copy_sz;
+ int rc;
+
+ /* Get FCPort Page 0 header */
+ hdr.PageVersion = 0;
+ hdr.PageLength = 0;
+ hdr.PageNumber = 0;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT;
+ cfg.hdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.pageAddr = portnum;
+ cfg.timeout = 0;
+
+ if ((rc = mpt_config(ioc, &cfg)) != 0)
+ return rc;
+
+ if (hdr.PageLength == 0)
+ return 0;
+
+ data_sz = hdr.PageLength * 4;
+ rc = -ENOMEM;
+ ppage0_alloc = (FCPortPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
+ if (ppage0_alloc) {
+ memset((u8 *)ppage0_alloc, 0, data_sz);
+ cfg.physAddr = page0_dma;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ if ((rc = mpt_config(ioc, &cfg)) == 0) {
+ /* save the data */
+ pp0dest = &ioc->fc_port_page0[portnum];
+ copy_sz = min_t(int, sizeof(FCPortPage0_t), data_sz);
+ memcpy(pp0dest, ppage0_alloc, copy_sz);
+
+ /*
+ * Normalize endianness of structure data,
+ * by byte-swapping all > 1 byte fields!
+ */
+ pp0dest->Flags = le32_to_cpu(pp0dest->Flags);
+ pp0dest->PortIdentifier = le32_to_cpu(pp0dest->PortIdentifier);
+ pp0dest->WWNN.Low = le32_to_cpu(pp0dest->WWNN.Low);
+ pp0dest->WWNN.High = le32_to_cpu(pp0dest->WWNN.High);
+ pp0dest->WWPN.Low = le32_to_cpu(pp0dest->WWPN.Low);
+ pp0dest->WWPN.High = le32_to_cpu(pp0dest->WWPN.High);
+ pp0dest->SupportedServiceClass = le32_to_cpu(pp0dest->SupportedServiceClass);
+ pp0dest->SupportedSpeeds = le32_to_cpu(pp0dest->SupportedSpeeds);
+ pp0dest->CurrentSpeed = le32_to_cpu(pp0dest->CurrentSpeed);
+ pp0dest->MaxFrameSize = le32_to_cpu(pp0dest->MaxFrameSize);
+ pp0dest->FabricWWNN.Low = le32_to_cpu(pp0dest->FabricWWNN.Low);
+ pp0dest->FabricWWNN.High = le32_to_cpu(pp0dest->FabricWWNN.High);
+ pp0dest->FabricWWPN.Low = le32_to_cpu(pp0dest->FabricWWPN.Low);
+ pp0dest->FabricWWPN.High = le32_to_cpu(pp0dest->FabricWWPN.High);
+ pp0dest->DiscoveredPortsCount = le32_to_cpu(pp0dest->DiscoveredPortsCount);
+ pp0dest->MaxInitiators = le32_to_cpu(pp0dest->MaxInitiators);
+
+ }
+
+ pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
+ }
+
+ return rc;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * GetIoUnitPage2 - Retrieve BIOS version and boot order information.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ *
+ * Returns: 0 for success
+ * -ENOMEM if no memory available
+ * -EPERM if not allowed due to ISR context
+ * -EAGAIN if no msg frames currently available
+ * -EFAULT for non-successful reply or no reply (timeout)
+ */
+static int
+GetIoUnitPage2(MPT_ADAPTER *ioc)
+{
+ ConfigPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ IOUnitPage2_t *ppage_alloc;
+ dma_addr_t page_dma;
+ int data_sz;
+ int rc;
+
+ /* Get the page header */
+ hdr.PageVersion = 0;
+ hdr.PageLength = 0;
+ hdr.PageNumber = 2;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT;
+ cfg.hdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.pageAddr = 0;
+ cfg.timeout = 0;
+
+ if ((rc = mpt_config(ioc, &cfg)) != 0)
+ return rc;
+
+ if (hdr.PageLength == 0)
+ return 0;
+
+ /* Read the config page */
+ data_sz = hdr.PageLength * 4;
+ rc = -ENOMEM;
+ ppage_alloc = (IOUnitPage2_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma);
+ if (ppage_alloc) {
+ memset((u8 *)ppage_alloc, 0, data_sz);
+ cfg.physAddr = page_dma;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ /* If Good, save data */
+ if ((rc = mpt_config(ioc, &cfg)) == 0)
+ ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion);
+
+ pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage_alloc, page_dma);
+ }
+
+ return rc;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/* mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2
+ * @ioc: Pointer to a Adapter Strucutre
+ * @portnum: IOC port number
+ *
+ * Return: -EFAULT if read of config page header fails
+ * or if no nvram
+ * If read of SCSI Port Page 0 fails,
+ * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
+ * Adapter settings: async, narrow
+ * Return 1
+ * If read of SCSI Port Page 2 fails,
+ * Adapter settings valid
+ * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
+ * Return 1
+ * Else
+ * Both valid
+ * Return 0
+ * CHECK - what type of locking mechanisms should be used????
+ */
+static int
+mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
+{
+ u8 *pbuf;
+ dma_addr_t buf_dma;
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t header;
+ int ii;
+ int data, rc = 0;
+
+ /* Allocate memory
+ */
+ if (!ioc->spi_data.nvram) {
+ int sz;
+ u8 *mem;
+ sz = MPT_MAX_SCSI_DEVICES * sizeof(int);
+ mem = kmalloc(sz, GFP_ATOMIC);
+ if (mem == NULL)
+ return -EFAULT;
+
+ ioc->spi_data.nvram = (int *) mem;
+
+ dprintk((MYIOC_s_INFO_FMT "SCSI device NVRAM settings @ %p, sz=%d\n",
+ ioc->name, ioc->spi_data.nvram, sz));
+ }
+
+ /* Invalidate NVRAM information
+ */
+ for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
+ ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID;
+ }
+
+ /* Read SPP0 header, allocate memory, then read page.
+ */
+ header.PageVersion = 0;
+ header.PageLength = 0;
+ header.PageNumber = 0;
+ header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
+ cfg.hdr = &header;
+ cfg.physAddr = -1;
+ cfg.pageAddr = portnum;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.timeout = 0; /* use default */
+ if (mpt_config(ioc, &cfg) != 0)
+ return -EFAULT;
+
+ if (header.PageLength > 0) {
+ pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
+ if (pbuf) {
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+ cfg.physAddr = buf_dma;
+ if (mpt_config(ioc, &cfg) != 0) {
+ ioc->spi_data.maxBusWidth = MPT_NARROW;
+ ioc->spi_data.maxSyncOffset = 0;
+ ioc->spi_data.minSyncFactor = MPT_ASYNC;
+ ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN;
+ rc = 1;
+ } else {
+ /* Save the Port Page 0 data
+ */
+ SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf;
+ pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities);
+ pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface);
+
+ if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
+ ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS;
+ dinitprintk((KERN_INFO MYNAM " :%s noQas due to Capabilities=%x\n",
+ ioc->name, pPP0->Capabilities));
+ }
+ ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
+ data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK;
+ if (data) {
+ ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
+ data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
+ ioc->spi_data.minSyncFactor = (u8) (data >> 8);
+ } else {
+ ioc->spi_data.maxSyncOffset = 0;
+ ioc->spi_data.minSyncFactor = MPT_ASYNC;
+ }
+
+ ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK;
+
+ /* Update the minSyncFactor based on bus type.
+ */
+ if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
+ (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) {
+
+ if (ioc->spi_data.minSyncFactor < MPT_ULTRA)
+ ioc->spi_data.minSyncFactor = MPT_ULTRA;
+ }
+ }
+ if (pbuf) {
+ pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
+ }
+ }
+ }
+
+ /* SCSI Port Page 2 - Read the header then the page.
+ */
+ header.PageVersion = 0;
+ header.PageLength = 0;
+ header.PageNumber = 2;
+ header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
+ cfg.hdr = &header;
+ cfg.physAddr = -1;
+ cfg.pageAddr = portnum;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ if (mpt_config(ioc, &cfg) != 0)
+ return -EFAULT;
+
+ if (header.PageLength > 0) {
+ /* Allocate memory and read SCSI Port Page 2
+ */
+ pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
+ if (pbuf) {
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM;
+ cfg.physAddr = buf_dma;
+ if (mpt_config(ioc, &cfg) != 0) {
+ /* Nvram data is left with INVALID mark
+ */
+ rc = 1;
+ } else {
+ SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf;
+ MpiDeviceInfo_t *pdevice = NULL;
+
+ /* Save the Port Page 2 data
+ * (reformat into a 32bit quantity)
+ */
+ data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK;
+ ioc->spi_data.PortFlags = data;
+ for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
+ pdevice = &pPP2->DeviceSettings[ii];
+ data = (le16_to_cpu(pdevice->DeviceFlags) << 16) |
+ (pdevice->SyncFactor << 8) | pdevice->Timeout;
+ ioc->spi_data.nvram[ii] = data;
+ }
+ }
+
+ pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
+ }
+ }
+
+ /* Update Adapter limits with those from NVRAM
+ * Comment: Don't need to do this. Target performance
+ * parameters will never exceed the adapters limits.
+ */
+
+ return rc;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/* mpt_readScsiDevicePageHeaders - save version and length of SDP1
+ * @ioc: Pointer to a Adapter Strucutre
+ * @portnum: IOC port number
+ *
+ * Return: -EFAULT if read of config page header fails
+ * or 0 if success.
+ */
+static int
+mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
+{
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t header;
+
+ /* Read the SCSI Device Page 1 header
+ */
+ header.PageVersion = 0;
+ header.PageLength = 0;
+ header.PageNumber = 1;
+ header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
+ cfg.hdr = &header;
+ cfg.physAddr = -1;
+ cfg.pageAddr = portnum;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.timeout = 0;
+ if (mpt_config(ioc, &cfg) != 0)
+ return -EFAULT;
+
+ ioc->spi_data.sdp1version = cfg.hdr->PageVersion;
+ ioc->spi_data.sdp1length = cfg.hdr->PageLength;
+
+ header.PageVersion = 0;
+ header.PageLength = 0;
+ header.PageNumber = 0;
+ header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
+ if (mpt_config(ioc, &cfg) != 0)
+ return -EFAULT;
+
+ ioc->spi_data.sdp0version = cfg.hdr->PageVersion;
+ ioc->spi_data.sdp0length = cfg.hdr->PageLength;
+
+ dcprintk((MYIOC_s_INFO_FMT "Headers: 0: version %d length %d\n",
+ ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length));
+
+ dcprintk((MYIOC_s_INFO_FMT "Headers: 1: version %d length %d\n",
+ ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length));
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
+ * @ioc: Pointer to a Adapter Strucutre
+ * @portnum: IOC port number
+ *
+ * Return:
+ * 0 on success
+ * -EFAULT if read of config page header fails or data pointer not NULL
+ * -ENOMEM if pci_alloc failed
+ */
+int
+mpt_findImVolumes(MPT_ADAPTER *ioc)
+{
+ IOCPage2_t *pIoc2;
+ u8 *mem;
+ ConfigPageIoc2RaidVol_t *pIocRv;
+ dma_addr_t ioc2_dma;
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t header;
+ int jj;
+ int rc = 0;
+ int iocpage2sz;
+ u8 nVols, nPhys;
+ u8 vid, vbus, vioc;
+
+ /* Read IOCP2 header then the page.
+ */
+ header.PageVersion = 0;
+ header.PageLength = 0;
+ header.PageNumber = 2;
+ header.PageType = MPI_CONFIG_PAGETYPE_IOC;
+ cfg.hdr = &header;
+ cfg.physAddr = -1;
+ cfg.pageAddr = 0;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.timeout = 0;
+ if (mpt_config(ioc, &cfg) != 0)
+ return -EFAULT;
+
+ if (header.PageLength == 0)
+ return -EFAULT;
+
+ iocpage2sz = header.PageLength * 4;
+ pIoc2 = pci_alloc_consistent(ioc->pcidev, iocpage2sz, &ioc2_dma);
+ if (!pIoc2)
+ return -ENOMEM;
+
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+ cfg.physAddr = ioc2_dma;
+ if (mpt_config(ioc, &cfg) != 0)
+ goto done_and_free;
+
+ if ( (mem = (u8 *)ioc->spi_data.pIocPg2) == NULL ) {
+ mem = kmalloc(iocpage2sz, GFP_ATOMIC);
+ if (mem) {
+ ioc->spi_data.pIocPg2 = (IOCPage2_t *) mem;
+ } else {
+ goto done_and_free;
+ }
+ }
+ memcpy(mem, (u8 *)pIoc2, iocpage2sz);
+
+ /* Identify RAID Volume Id's */
+ nVols = pIoc2->NumActiveVolumes;
+ if ( nVols == 0) {
+ /* No RAID Volume.
+ */
+ goto done_and_free;
+ } else {
+ /* At least 1 RAID Volume
+ */
+ pIocRv = pIoc2->RaidVolume;
+ ioc->spi_data.isRaid = 0;
+ for (jj = 0; jj < nVols; jj++, pIocRv++) {
+ vid = pIocRv->VolumeID;
+ vbus = pIocRv->VolumeBus;
+ vioc = pIocRv->VolumeIOC;
+
+ /* find the match
+ */
+ if (vbus == 0) {
+ ioc->spi_data.isRaid |= (1 << vid);
+ } else {
+ /* Error! Always bus 0
+ */
+ }
+ }
+ }
+
+ /* Identify Hidden Physical Disk Id's */
+ nPhys = pIoc2->NumActivePhysDisks;
+ if (nPhys == 0) {
+ /* No physical disks.
+ */
+ } else {
+ mpt_read_ioc_pg_3(ioc);
+ }
+
+done_and_free:
+ pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma);
+
+ return rc;
+}
+
+int
+mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
+{
+ IOCPage3_t *pIoc3;
+ u8 *mem;
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t header;
+ dma_addr_t ioc3_dma;
+ int iocpage3sz = 0;
+
+ /* Free the old page
+ */
+ if (ioc->spi_data.pIocPg3) {
+ kfree(ioc->spi_data.pIocPg3);
+ ioc->spi_data.pIocPg3 = NULL;
+ }
+
+ /* There is at least one physical disk.
+ * Read and save IOC Page 3
+ */
+ header.PageVersion = 0;
+ header.PageLength = 0;
+ header.PageNumber = 3;
+ header.PageType = MPI_CONFIG_PAGETYPE_IOC;
+ cfg.hdr = &header;
+ cfg.physAddr = -1;
+ cfg.pageAddr = 0;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.timeout = 0;
+ if (mpt_config(ioc, &cfg) != 0)
+ return 0;
+
+ if (header.PageLength == 0)
+ return 0;
+
+ /* Read Header good, alloc memory
+ */
+ iocpage3sz = header.PageLength * 4;
+ pIoc3 = pci_alloc_consistent(ioc->pcidev, iocpage3sz, &ioc3_dma);
+ if (!pIoc3)
+ return 0;
+
+ /* Read the Page and save the data
+ * into malloc'd memory.
+ */
+ cfg.physAddr = ioc3_dma;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+ if (mpt_config(ioc, &cfg) == 0) {
+ mem = kmalloc(iocpage3sz, GFP_ATOMIC);
+ if (mem) {
+ memcpy(mem, (u8 *)pIoc3, iocpage3sz);
+ ioc->spi_data.pIocPg3 = (IOCPage3_t *) mem;
+ }
+ }
+
+ pci_free_consistent(ioc->pcidev, iocpage3sz, pIoc3, ioc3_dma);
+
+ return 0;
+}
+
+static void
+mpt_read_ioc_pg_4(MPT_ADAPTER *ioc)
+{
+ IOCPage4_t *pIoc4;
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t header;
+ dma_addr_t ioc4_dma;
+ int iocpage4sz;
+
+ /* Read and save IOC Page 4
+ */
+ header.PageVersion = 0;
+ header.PageLength = 0;
+ header.PageNumber = 4;
+ header.PageType = MPI_CONFIG_PAGETYPE_IOC;
+ cfg.hdr = &header;
+ cfg.physAddr = -1;
+ cfg.pageAddr = 0;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.timeout = 0;
+ if (mpt_config(ioc, &cfg) != 0)
+ return;
+
+ if (header.PageLength == 0)
+ return;
+
+ if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) {
+ iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */
+ pIoc4 = pci_alloc_consistent(ioc->pcidev, iocpage4sz, &ioc4_dma);
+ if (!pIoc4)
+ return;
+ } else {
+ ioc4_dma = ioc->spi_data.IocPg4_dma;
+ iocpage4sz = ioc->spi_data.IocPg4Sz;
+ }
+
+ /* Read the Page into dma memory.
+ */
+ cfg.physAddr = ioc4_dma;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+ if (mpt_config(ioc, &cfg) == 0) {
+ ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4;
+ ioc->spi_data.IocPg4_dma = ioc4_dma;
+ ioc->spi_data.IocPg4Sz = iocpage4sz;
+ } else {
+ pci_free_consistent(ioc->pcidev, iocpage4sz, pIoc4, ioc4_dma);
+ ioc->spi_data.pIocPg4 = NULL;
+ }
+}
+
+static void
+mpt_read_ioc_pg_1(MPT_ADAPTER *ioc)
+{
+ IOCPage1_t *pIoc1;
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t header;
+ dma_addr_t ioc1_dma;
+ int iocpage1sz = 0;
+ u32 tmp;
+
+ /* Check the Coalescing Timeout in IOC Page 1
+ */
+ header.PageVersion = 0;
+ header.PageLength = 0;
+ header.PageNumber = 1;
+ header.PageType = MPI_CONFIG_PAGETYPE_IOC;
+ cfg.hdr = &header;
+ cfg.physAddr = -1;
+ cfg.pageAddr = 0;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.timeout = 0;
+ if (mpt_config(ioc, &cfg) != 0)
+ return;
+
+ if (header.PageLength == 0)
+ return;
+
+ /* Read Header good, alloc memory
+ */
+ iocpage1sz = header.PageLength * 4;
+ pIoc1 = pci_alloc_consistent(ioc->pcidev, iocpage1sz, &ioc1_dma);
+ if (!pIoc1)
+ return;
+
+ /* Read the Page and check coalescing timeout
+ */
+ cfg.physAddr = ioc1_dma;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+ if (mpt_config(ioc, &cfg) == 0) {
+
+ tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING;
+ if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) {
+ tmp = le32_to_cpu(pIoc1->CoalescingTimeout);
+
+ dprintk((MYIOC_s_INFO_FMT "Coalescing Enabled Timeout = %d\n",
+ ioc->name, tmp));
+
+ if (tmp > MPT_COALESCING_TIMEOUT) {
+ pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT);
+
+ /* Write NVRAM and current
+ */
+ cfg.dir = 1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+ if (mpt_config(ioc, &cfg) == 0) {
+ dprintk((MYIOC_s_INFO_FMT "Reset Current Coalescing Timeout to = %d\n",
+ ioc->name, MPT_COALESCING_TIMEOUT));
+
+ cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM;
+ if (mpt_config(ioc, &cfg) == 0) {
+ dprintk((MYIOC_s_INFO_FMT "Reset NVRAM Coalescing Timeout to = %d\n",
+ ioc->name, MPT_COALESCING_TIMEOUT));
+ } else {
+ dprintk((MYIOC_s_INFO_FMT "Reset NVRAM Coalescing Timeout Failed\n",
+ ioc->name));
+ }
+
+ } else {
+ dprintk((MYIOC_s_WARN_FMT "Reset of Current Coalescing Timeout Failed!\n",
+ ioc->name));
+ }
+ }
+
+ } else {
+ dprintk((MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name));
+ }
+ }
+
+ pci_free_consistent(ioc->pcidev, iocpage1sz, pIoc1, ioc1_dma);
+
+ return;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * SendEventNotification - Send EventNotification (on or off) request
+ * to MPT adapter.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @EvSwitch: Event switch flags
+ */
+static int
+SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch)
+{
+ EventNotification_t *evnp;
+
+ evnp = (EventNotification_t *) mpt_get_msg_frame(mpt_base_index, ioc);
+ if (evnp == NULL) {
+ dprintk((MYIOC_s_WARN_FMT "Unable to allocate event request frame!\n",
+ ioc->name));
+ return 0;
+ }
+ memset(evnp, 0, sizeof(*evnp));
+
+ dprintk((MYIOC_s_INFO_FMT "Sending EventNotification(%d)\n", ioc->name, EvSwitch));
+
+ evnp->Function = MPI_FUNCTION_EVENT_NOTIFICATION;
+ evnp->ChainOffset = 0;
+ evnp->MsgFlags = 0;
+ evnp->Switch = EvSwitch;
+
+ mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)evnp);
+
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * SendEventAck - Send EventAck request to MPT adapter.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @evnp: Pointer to original EventNotification request
+ */
+static int
+SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
+{
+ EventAck_t *pAck;
+
+ if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
+ printk(MYIOC_s_WARN_FMT "Unable to allocate event ACK request frame!\n",
+ ioc->name);
+ return -1;
+ }
+ memset(pAck, 0, sizeof(*pAck));
+
+ dprintk((MYIOC_s_INFO_FMT "Sending EventAck\n", ioc->name));
+
+ pAck->Function = MPI_FUNCTION_EVENT_ACK;
+ pAck->ChainOffset = 0;
+ pAck->MsgFlags = 0;
+ pAck->Event = evnp->Event;
+ pAck->EventContext = evnp->EventContext;
+
+ mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck);
+
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_config - Generic function to issue config message
+ * @ioc - Pointer to an adapter structure
+ * @cfg - Pointer to a configuration structure. Struct contains
+ * action, page address, direction, physical address
+ * and pointer to a configuration page header
+ * Page header is updated.
+ *
+ * Returns 0 for success
+ * -EPERM if not allowed due to ISR context
+ * -EAGAIN if no msg frames currently available
+ * -EFAULT for non-successful reply or no reply (timeout)
+ */
+int
+mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
+{
+ Config_t *pReq;
+ MPT_FRAME_HDR *mf;
+ unsigned long flags;
+ int ii, rc;
+ u32 flagsLength;
+ int in_isr;
+
+ /* (Bugzilla:fibrebugs, #513)
+ * Bug fix (part 1)! 20010905 -sralston
+ * Prevent calling wait_event() (below), if caller happens
+ * to be in ISR context, because that is fatal!
+ */
+ in_isr = in_interrupt();
+ if (in_isr) {
+ dcprintk((MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n",
+ ioc->name));
+ return -EPERM;
+ }
+
+ /* Get and Populate a free Frame
+ */
+ if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
+ dcprintk((MYIOC_s_WARN_FMT "mpt_config: no msg frames!\n",
+ ioc->name));
+ return -EAGAIN;
+ }
+ pReq = (Config_t *)mf;
+ pReq->Action = pCfg->action;
+ pReq->Reserved = 0;
+ pReq->ChainOffset = 0;
+ pReq->Function = MPI_FUNCTION_CONFIG;
+ pReq->ExtPageLength = 0;
+ pReq->ExtPageType = 0;
+ pReq->MsgFlags = 0;
+ for (ii=0; ii < 8; ii++)
+ pReq->Reserved2[ii] = 0;
+
+ pReq->Header.PageVersion = pCfg->hdr->PageVersion;
+ pReq->Header.PageLength = pCfg->hdr->PageLength;
+ pReq->Header.PageNumber = pCfg->hdr->PageNumber;
+ pReq->Header.PageType = (pCfg->hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
+ pReq->PageAddress = cpu_to_le32(pCfg->pageAddr);
+
+ /* Add a SGE to the config request.
+ */
+ if (pCfg->dir)
+ flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
+ else
+ flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
+
+ flagsLength |= pCfg->hdr->PageLength * 4;
+
+ mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
+
+ dcprintk((MYIOC_s_INFO_FMT "Sending Config request type %d, page %d and action %d\n",
+ ioc->name, pReq->Header.PageType, pReq->Header.PageNumber, pReq->Action));
+
+ /* Append pCfg pointer to end of mf
+ */
+ *((void **) (((u8 *) mf) + (ioc->req_sz - sizeof(void *)))) = (void *) pCfg;
+
+ /* Initalize the timer
+ */
+ init_timer(&pCfg->timer);
+ pCfg->timer.data = (unsigned long) ioc;
+ pCfg->timer.function = mpt_timer_expired;
+ pCfg->wait_done = 0;
+
+ /* Set the timer; ensure 10 second minimum */
+ if (pCfg->timeout < 10)
+ pCfg->timer.expires = jiffies + HZ*10;
+ else
+ pCfg->timer.expires = jiffies + HZ*pCfg->timeout;
+
+ /* Add to end of Q, set timer and then issue this command */
+ spin_lock_irqsave(&ioc->FreeQlock, flags);
+ list_add_tail(&pCfg->linkage, &ioc->configQ);
+ spin_unlock_irqrestore(&ioc->FreeQlock, flags);
+
+ add_timer(&pCfg->timer);
+ mpt_put_msg_frame(mpt_base_index, ioc, mf);
+ wait_event(mpt_waitq, pCfg->wait_done);
+
+ /* mf has been freed - do not access */
+
+ rc = pCfg->status;
+
+ return rc;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_toolbox - Generic function to issue toolbox message
+ * @ioc - Pointer to an adapter structure
+ * @cfg - Pointer to a toolbox structure. Struct contains
+ * action, page address, direction, physical address
+ * and pointer to a configuration page header
+ * Page header is updated.
+ *
+ * Returns 0 for success
+ * -EPERM if not allowed due to ISR context
+ * -EAGAIN if no msg frames currently available
+ * -EFAULT for non-successful reply or no reply (timeout)
+ */
+int
+mpt_toolbox(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
+{
+ ToolboxIstwiReadWriteRequest_t *pReq;
+ MPT_FRAME_HDR *mf;
+ struct pci_dev *pdev;
+ unsigned long flags;
+ int rc;
+ u32 flagsLength;
+ int in_isr;
+
+ /* (Bugzilla:fibrebugs, #513)
+ * Bug fix (part 1)! 20010905 -sralston
+ * Prevent calling wait_event() (below), if caller happens
+ * to be in ISR context, because that is fatal!
+ */
+ in_isr = in_interrupt();
+ if (in_isr) {
+ dcprintk((MYIOC_s_WARN_FMT "toobox request not allowed in ISR context!\n",
+ ioc->name));
+ return -EPERM;
+ }
+
+ /* Get and Populate a free Frame
+ */
+ if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
+ dcprintk((MYIOC_s_WARN_FMT "mpt_toolbox: no msg frames!\n",
+ ioc->name));
+ return -EAGAIN;
+ }
+ pReq = (ToolboxIstwiReadWriteRequest_t *)mf;
+ pReq->Tool = pCfg->action;
+ pReq->Reserved = 0;
+ pReq->ChainOffset = 0;
+ pReq->Function = MPI_FUNCTION_TOOLBOX;
+ pReq->Reserved1 = 0;
+ pReq->Reserved2 = 0;
+ pReq->MsgFlags = 0;
+ pReq->Flags = pCfg->dir;
+ pReq->BusNum = 0;
+ pReq->Reserved3 = 0;
+ pReq->NumAddressBytes = 0x01;
+ pReq->Reserved4 = 0;
+ pReq->DataLength = 0x04;
+ pdev = (struct pci_dev *) ioc->pcidev;
+ if (pdev->devfn & 1)
+ pReq->DeviceAddr = 0xB2;
+ else
+ pReq->DeviceAddr = 0xB0;
+ pReq->Addr1 = 0;
+ pReq->Addr2 = 0;
+ pReq->Addr3 = 0;
+ pReq->Reserved5 = 0;
+
+ /* Add a SGE to the config request.
+ */
+
+ flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | 4;
+
+ mpt_add_sge((char *)&pReq->SGL, flagsLength, pCfg->physAddr);
+
+ dcprintk((MYIOC_s_INFO_FMT "Sending Toolbox request, Tool=%x\n",
+ ioc->name, pReq->Tool));
+
+ /* Append pCfg pointer to end of mf
+ */
+ *((void **) (((u8 *) mf) + (ioc->req_sz - sizeof(void *)))) = (void *) pCfg;
+
+ /* Initalize the timer
+ */
+ init_timer(&pCfg->timer);
+ pCfg->timer.data = (unsigned long) ioc;
+ pCfg->timer.function = mpt_timer_expired;
+ pCfg->wait_done = 0;
+
+ /* Set the timer; ensure 10 second minimum */
+ if (pCfg->timeout < 10)
+ pCfg->timer.expires = jiffies + HZ*10;
+ else
+ pCfg->timer.expires = jiffies + HZ*pCfg->timeout;
+
+ /* Add to end of Q, set timer and then issue this command */
+ spin_lock_irqsave(&ioc->FreeQlock, flags);
+ list_add_tail(&pCfg->linkage, &ioc->configQ);
+ spin_unlock_irqrestore(&ioc->FreeQlock, flags);
+
+ add_timer(&pCfg->timer);
+ mpt_put_msg_frame(mpt_base_index, ioc, mf);
+ wait_event(mpt_waitq, pCfg->wait_done);
+
+ /* mf has been freed - do not access */
+
+ rc = pCfg->status;
+
+ return rc;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mpt_timer_expired - Call back for timer process.
+ * Used only internal config functionality.
+ * @data: Pointer to MPT_SCSI_HOST recast as an unsigned long
+ */
+static void
+mpt_timer_expired(unsigned long data)
+{
+ MPT_ADAPTER *ioc = (MPT_ADAPTER *) data;
+
+ dcprintk((MYIOC_s_WARN_FMT "mpt_timer_expired! \n", ioc->name));
+
+ /* Perform a FW reload */
+ if (mpt_HardResetHandler(ioc, NO_SLEEP) < 0)
+ printk(MYIOC_s_WARN_FMT "Firmware Reload FAILED!\n", ioc->name);
+
+ /* No more processing.
+ * Hard reset clean-up will wake up
+ * process and free all resources.
+ */
+ dcprintk((MYIOC_s_WARN_FMT "mpt_timer_expired complete!\n", ioc->name));
+
+ return;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mpt_ioc_reset - Base cleanup for hard reset
+ * @ioc: Pointer to the adapter structure
+ * @reset_phase: Indicates pre- or post-reset functionality
+ *
+ * Remark: Free's resources with internally generated commands.
+ */
+static int
+mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
+{
+ CONFIGPARMS *pCfg;
+ unsigned long flags;
+
+ dprintk((KERN_WARNING MYNAM
+ ": IOC %s_reset routed to MPT base driver!\n",
+ reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
+ reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
+
+ if (reset_phase == MPT_IOC_SETUP_RESET) {
+ ;
+ } else if (reset_phase == MPT_IOC_PRE_RESET) {
+ /* If the internal config Q is not empty -
+ * delete timer. MF resources will be freed when
+ * the FIFO's are primed.
+ */
+ spin_lock_irqsave(&ioc->FreeQlock, flags);
+ list_for_each_entry(pCfg, &ioc->configQ, linkage)
+ del_timer(&pCfg->timer);
+ spin_unlock_irqrestore(&ioc->FreeQlock, flags);
+
+ } else {
+ CONFIGPARMS *pNext;
+
+ /* Search the configQ for internal commands.
+ * Flush the Q, and wake up all suspended threads.
+ */
+ spin_lock_irqsave(&ioc->FreeQlock, flags);
+ list_for_each_entry_safe(pCfg, pNext, &ioc->configQ, linkage) {
+ list_del(&pCfg->linkage);
+
+ pCfg->status = MPT_CONFIG_ERROR;
+ pCfg->wait_done = 1;
+ wake_up(&mpt_waitq);
+ }
+ spin_unlock_irqrestore(&ioc->FreeQlock, flags);
+ }
+
+ return 1; /* currently means nothing really */
+}
+
+
+#ifdef CONFIG_PROC_FS /* { */
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff...
+ */
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+procmpt_create(void)
+{
+ struct proc_dir_entry *ent;
+
+ mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL);
+ if (mpt_proc_root_dir == NULL)
+ return -ENOTDIR;
+
+ ent = create_proc_entry("summary", S_IFREG|S_IRUGO, mpt_proc_root_dir);
+ if (ent)
+ ent->read_proc = procmpt_summary_read;
+
+ ent = create_proc_entry("version", S_IFREG|S_IRUGO, mpt_proc_root_dir);
+ if (ent)
+ ent->read_proc = procmpt_version_read;
+
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static void
+procmpt_destroy(void)
+{
+ remove_proc_entry("version", mpt_proc_root_dir);
+ remove_proc_entry("summary", mpt_proc_root_dir);
+ remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * procmpt_summary_read - Handle read request from /proc/mpt/summary
+ * or from /proc/mpt/iocN/summary.
+ * @buf: Pointer to area to write information
+ * @start: Pointer to start pointer
+ * @offset: Offset to start writing
+ * @request:
+ * @eof: Pointer to EOF integer
+ * @data: Pointer
+ *
+ * Returns number of characters written to process performing the read.
+ */
+static int
+procmpt_summary_read(char *buf, char **start, off_t offset, int request, int *eof, void *data)
+{
+ MPT_ADAPTER *ioc;
+ char *out = buf;
+ int len;
+
+ if (data) {
+ int more = 0;
+
+ ioc = data;
+ mpt_print_ioc_summary(ioc, out, &more, 0, 1);
+
+ out += more;
+ } else {
+ list_for_each_entry(ioc, &ioc_list, list) {
+ int more = 0;
+
+ mpt_print_ioc_summary(ioc, out, &more, 0, 1);
+
+ out += more;
+ if ((out-buf) >= request)
+ break;
+ }
+ }
+
+ len = out - buf;
+
+ MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * procmpt_version_read - Handle read request from /proc/mpt/version.
+ * @buf: Pointer to area to write information
+ * @start: Pointer to start pointer
+ * @offset: Offset to start writing
+ * @request:
+ * @eof: Pointer to EOF integer
+ * @data: Pointer
+ *
+ * Returns number of characters written to process performing the read.
+ */
+static int
+procmpt_version_read(char *buf, char **start, off_t offset, int request, int *eof, void *data)
+{
+ int ii;
+ int scsi, lan, ctl, targ, dmp;
+ char *drvname;
+ int len;
+
+ len = sprintf(buf, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON);
+ len += sprintf(buf+len, " Fusion MPT base driver\n");
+
+ scsi = lan = ctl = targ = dmp = 0;
+ for (ii=MPT_MAX_PROTOCOL_DRIVERS-1; ii; ii--) {
+ drvname = NULL;
+ if (MptCallbacks[ii]) {
+ switch (MptDriverClass[ii]) {
+ case MPTSCSIH_DRIVER:
+ if (!scsi++) drvname = "SCSI host";
+ break;
+ case MPTLAN_DRIVER:
+ if (!lan++) drvname = "LAN";
+ break;
+ case MPTSTM_DRIVER:
+ if (!targ++) drvname = "SCSI target";
+ break;
+ case MPTCTL_DRIVER:
+ if (!ctl++) drvname = "ioctl";
+ break;
+ }
+
+ if (drvname)
+ len += sprintf(buf+len, " Fusion MPT %s driver\n", drvname);
+ }
+ }
+
+ MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * procmpt_iocinfo_read - Handle read request from /proc/mpt/iocN/info.
+ * @buf: Pointer to area to write information
+ * @start: Pointer to start pointer
+ * @offset: Offset to start writing
+ * @request:
+ * @eof: Pointer to EOF integer
+ * @data: Pointer
+ *
+ * Returns number of characters written to process performing the read.
+ */
+static int
+procmpt_iocinfo_read(char *buf, char **start, off_t offset, int request, int *eof, void *data)
+{
+ MPT_ADAPTER *ioc = data;
+ int len;
+ char expVer[32];
+ int sz;
+ int p;
+
+ mpt_get_fw_exp_ver(expVer, ioc);
+
+ len = sprintf(buf, "%s:", ioc->name);
+ if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
+ len += sprintf(buf+len, " (f/w download boot flag set)");
+// if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL)
+// len += sprintf(buf+len, " CONFIG_CHECKSUM_FAIL!");
+
+ len += sprintf(buf+len, "\n ProductID = 0x%04x (%s)\n",
+ ioc->facts.ProductID,
+ ioc->prod_name);
+ len += sprintf(buf+len, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer);
+ if (ioc->facts.FWImageSize)
+ len += sprintf(buf+len, " (fw_size=%d)", ioc->facts.FWImageSize);
+ len += sprintf(buf+len, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion);
+ len += sprintf(buf+len, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit);
+ len += sprintf(buf+len, " EventState = 0x%02x\n", ioc->facts.EventState);
+
+ len += sprintf(buf+len, " CurrentHostMfaHighAddr = 0x%08x\n",
+ ioc->facts.CurrentHostMfaHighAddr);
+ len += sprintf(buf+len, " CurrentSenseBufferHighAddr = 0x%08x\n",
+ ioc->facts.CurrentSenseBufferHighAddr);
+
+ len += sprintf(buf+len, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth);
+ len += sprintf(buf+len, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize);
+
+ len += sprintf(buf+len, " RequestFrames @ 0x%p (Dma @ 0x%p)\n",
+ (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma);
+ /*
+ * Rounding UP to nearest 4-kB boundary here...
+ */
+ sz = (ioc->req_sz * ioc->req_depth) + 128;
+ sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000;
+ len += sprintf(buf+len, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n",
+ ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz);
+ len += sprintf(buf+len, " {MaxReqSz=%d} {MaxReqDepth=%d}\n",
+ 4*ioc->facts.RequestFrameSize,
+ ioc->facts.GlobalCredits);
+
+ len += sprintf(buf+len, " Frames @ 0x%p (Dma @ 0x%p)\n",
+ (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma);
+ sz = (ioc->reply_sz * ioc->reply_depth) + 128;
+ len += sprintf(buf+len, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n",
+ ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz);
+ len += sprintf(buf+len, " {MaxRepSz=%d} {MaxRepDepth=%d}\n",
+ ioc->facts.CurReplyFrameSize,
+ ioc->facts.ReplyQueueDepth);
+
+ len += sprintf(buf+len, " MaxDevices = %d\n",
+ (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices);
+ len += sprintf(buf+len, " MaxBuses = %d\n", ioc->facts.MaxBuses);
+
+ /* per-port info */
+ for (p=0; p < ioc->facts.NumberOfPorts; p++) {
+ len += sprintf(buf+len, " PortNumber = %d (of %d)\n",
+ p+1,
+ ioc->facts.NumberOfPorts);
+ if (ioc->bus_type == FC) {
+ if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
+ u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
+ len += sprintf(buf+len, " LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
+ a[5], a[4], a[3], a[2], a[1], a[0]);
+ }
+ len += sprintf(buf+len, " WWN = %08X%08X:%08X%08X\n",
+ ioc->fc_port_page0[p].WWNN.High,
+ ioc->fc_port_page0[p].WWNN.Low,
+ ioc->fc_port_page0[p].WWPN.High,
+ ioc->fc_port_page0[p].WWPN.Low);
+ }
+ }
+
+ MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len);
+}
+
+#endif /* CONFIG_PROC_FS } */
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+static void
+mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc)
+{
+ buf[0] ='\0';
+ if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) {
+ sprintf(buf, " (Exp %02d%02d)",
+ (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */
+ (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */
+
+ /* insider hack! */
+ if ((ioc->facts.FWVersion.Word >> 8) & 0x80)
+ strcat(buf, " [MDBG]");
+ }
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @buffer: Pointer to buffer where IOC summary info should be written
+ * @size: Pointer to number of bytes we wrote (set by this routine)
+ * @len: Offset at which to start writing in buffer
+ * @showlan: Display LAN stuff?
+ *
+ * This routine writes (english readable) ASCII text, which represents
+ * a summary of IOC information, to a buffer.
+ */
+void
+mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan)
+{
+ char expVer[32];
+ int y;
+
+ mpt_get_fw_exp_ver(expVer, ioc);
+
+ /*
+ * Shorter summary of attached ioc's...
+ */
+ y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
+ ioc->name,
+ ioc->prod_name,
+ MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
+ ioc->facts.FWVersion.Word,
+ expVer,
+ ioc->facts.NumberOfPorts,
+ ioc->req_depth);
+
+ if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
+ u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
+ y += sprintf(buffer+len+y, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
+ a[5], a[4], a[3], a[2], a[1], a[0]);
+ }
+
+#ifndef __sparc__
+ y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
+#else
+ y += sprintf(buffer+len+y, ", IRQ=%s", __irq_itoa(ioc->pci_irq));
+#endif
+
+ if (!ioc->active)
+ y += sprintf(buffer+len+y, " (disabled)");
+
+ y += sprintf(buffer+len+y, "\n");
+
+ *size = y;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * Reset Handling
+ */
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_HardResetHandler - Generic reset handler, issue SCSI Task
+ * Management call based on input arg values. If TaskMgmt fails,
+ * return associated SCSI request.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @sleepFlag: Indicates if sleep or schedule must be called.
+ *
+ * Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
+ * or a non-interrupt thread. In the former, must not call schedule().
+ *
+ * Remark: A return of -1 is a FATAL error case, as it means a
+ * FW reload/initialization failed.
+ *
+ * Returns 0 for SUCCESS or -1 if FAILED.
+ */
+int
+mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
+{
+ int rc;
+ unsigned long flags;
+
+ dtmprintk((MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name));
+#ifdef MFCNT
+ printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
+ printk("MF count 0x%x !\n", ioc->mfcnt);
+#endif
+
+ /* Reset the adapter. Prevent more than 1 call to
+ * mpt_do_ioc_recovery at any instant in time.
+ */
+ spin_lock_irqsave(&ioc->diagLock, flags);
+ if ((ioc->diagPending) || (ioc->alt_ioc && ioc->alt_ioc->diagPending)){
+ spin_unlock_irqrestore(&ioc->diagLock, flags);
+ return 0;
+ } else {
+ ioc->diagPending = 1;
+ }
+ spin_unlock_irqrestore(&ioc->diagLock, flags);
+
+ /* FIXME: If do_ioc_recovery fails, repeat....
+ */
+
+ /* The SCSI driver needs to adjust timeouts on all current
+ * commands prior to the diagnostic reset being issued.
+ * Prevents timeouts occuring during a diagnostic reset...very bad.
+ * For all other protocol drivers, this is a no-op.
+ */
+ {
+ int ii;
+ int r = 0;
+
+ for (ii=MPT_MAX_PROTOCOL_DRIVERS-1; ii; ii--) {
+ if (MptResetHandlers[ii]) {
+ dtmprintk((MYIOC_s_INFO_FMT "Calling IOC reset_setup handler #%d\n",
+ ioc->name, ii));
+ r += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_SETUP_RESET);
+ if (ioc->alt_ioc) {
+ dtmprintk((MYIOC_s_INFO_FMT "Calling alt-%s setup reset handler #%d\n",
+ ioc->name, ioc->alt_ioc->name, ii));
+ r += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_SETUP_RESET);
+ }
+ }
+ }
+ }
+
+ if ((rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag)) != 0) {
+ printk(KERN_WARNING MYNAM ": WARNING - (%d) Cannot recover %s\n",
+ rc, ioc->name);
+ }
+ ioc->reload_fw = 0;
+ if (ioc->alt_ioc)
+ ioc->alt_ioc->reload_fw = 0;
+
+ spin_lock_irqsave(&ioc->diagLock, flags);
+ ioc->diagPending = 0;
+ if (ioc->alt_ioc)
+ ioc->alt_ioc->diagPending = 0;
+ spin_unlock_irqrestore(&ioc->diagLock, flags);
+
+ dtmprintk((MYIOC_s_INFO_FMT "HardResetHandler rc = %d!\n", ioc->name, rc));
+
+ return rc;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+static char *
+EventDescriptionStr(u8 event, u32 evData0)
+{
+ char *ds;
+
+ switch(event) {
+ case MPI_EVENT_NONE:
+ ds = "None";
+ break;
+ case MPI_EVENT_LOG_DATA:
+ ds = "Log Data";
+ break;
+ case MPI_EVENT_STATE_CHANGE:
+ ds = "State Change";
+ break;
+ case MPI_EVENT_UNIT_ATTENTION:
+ ds = "Unit Attention";
+ break;
+ case MPI_EVENT_IOC_BUS_RESET:
+ ds = "IOC Bus Reset";
+ break;
+ case MPI_EVENT_EXT_BUS_RESET:
+ ds = "External Bus Reset";
+ break;
+ case MPI_EVENT_RESCAN:
+ ds = "Bus Rescan Event";
+ /* Ok, do we need to do anything here? As far as
+ I can tell, this is when a new device gets added
+ to the loop. */
+ break;
+ case MPI_EVENT_LINK_STATUS_CHANGE:
+ if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE)
+ ds = "Link Status(FAILURE) Change";
+ else
+ ds = "Link Status(ACTIVE) Change";
+ break;
+ case MPI_EVENT_LOOP_STATE_CHANGE:
+ if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
+ ds = "Loop State(LIP) Change";
+ else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
+ ds = "Loop State(LPE) Change"; /* ??? */
+ else
+ ds = "Loop State(LPB) Change"; /* ??? */
+ break;
+ case MPI_EVENT_LOGOUT:
+ ds = "Logout";
+ break;
+ case MPI_EVENT_EVENT_CHANGE:
+ if (evData0)
+ ds = "Events(ON) Change";
+ else
+ ds = "Events(OFF) Change";
+ break;
+ case MPI_EVENT_INTEGRATED_RAID:
+ ds = "Integrated Raid";
+ break;
+ /*
+ * MPT base "custom" events may be added here...
+ */
+ default:
+ ds = "Unknown";
+ break;
+ }
+ return ds;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * ProcessEventNotification - Route a received EventNotificationReply to
+ * all currently regeistered event handlers.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @pEventReply: Pointer to EventNotification reply frame
+ * @evHandlers: Pointer to integer, number of event handlers
+ *
+ * Returns sum of event handlers return values.
+ */
+static int
+ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers)
+{
+ u16 evDataLen;
+ u32 evData0 = 0;
+// u32 evCtx;
+ int ii;
+ int r = 0;
+ int handlers = 0;
+ char *evStr;
+ u8 event;
+
+ /*
+ * Do platform normalization of values
+ */
+ event = le32_to_cpu(pEventReply->Event) & 0xFF;
+// evCtx = le32_to_cpu(pEventReply->EventContext);
+ evDataLen = le16_to_cpu(pEventReply->EventDataLength);
+ if (evDataLen) {
+ evData0 = le32_to_cpu(pEventReply->Data[0]);
+ }
+
+ evStr = EventDescriptionStr(event, evData0);
+ devtprintk((MYIOC_s_INFO_FMT "MPT event (%s=%02Xh) detected!\n",
+ ioc->name,
+ evStr,
+ event));
+
+#if defined(MPT_DEBUG) || defined(MPT_DEBUG_EVENTS)
+ printk(KERN_INFO MYNAM ": Event data:\n" KERN_INFO);
+ for (ii = 0; ii < evDataLen; ii++)
+ printk(" %08x", le32_to_cpu(pEventReply->Data[ii]));
+ printk("\n");
+#endif
+
+ /*
+ * Do general / base driver event processing
+ */
+ switch(event) {
+ case MPI_EVENT_NONE: /* 00 */
+ case MPI_EVENT_LOG_DATA: /* 01 */
+ case MPI_EVENT_STATE_CHANGE: /* 02 */
+ case MPI_EVENT_UNIT_ATTENTION: /* 03 */
+ case MPI_EVENT_IOC_BUS_RESET: /* 04 */
+ case MPI_EVENT_EXT_BUS_RESET: /* 05 */
+ case MPI_EVENT_RESCAN: /* 06 */
+ case MPI_EVENT_LINK_STATUS_CHANGE: /* 07 */
+ case MPI_EVENT_LOOP_STATE_CHANGE: /* 08 */
+ case MPI_EVENT_LOGOUT: /* 09 */
+ case MPI_EVENT_INTEGRATED_RAID: /* 0B */
+ case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE: /* 0C */
+ default:
+ break;
+ case MPI_EVENT_EVENT_CHANGE: /* 0A */
+ if (evDataLen) {
+ u8 evState = evData0 & 0xFF;
+
+ /* CHECKME! What if evState unexpectedly says OFF (0)? */
+
+ /* Update EventState field in cached IocFacts */
+ if (ioc->facts.Function) {
+ ioc->facts.EventState = evState;
+ }
+ }
+ break;
+ }
+
+ /*
+ * Should this event be logged? Events are written sequentially.
+ * When buffer is full, start again at the top.
+ */
+ if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
+ int idx;
+
+ idx = ioc->eventContext % ioc->eventLogSize;
+
+ ioc->events[idx].event = event;
+ ioc->events[idx].eventContext = ioc->eventContext;
+
+ for (ii = 0; ii < 2; ii++) {
+ if (ii < evDataLen)
+ ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]);
+ else
+ ioc->events[idx].data[ii] = 0;
+ }
+
+ ioc->eventContext++;
+ }
+
+
+ /*
+ * Call each currently registered protocol event handler.
+ */
+ for (ii=MPT_MAX_PROTOCOL_DRIVERS-1; ii; ii--) {
+ if (MptEvHandlers[ii]) {
+ devtprintk((MYIOC_s_INFO_FMT "Routing Event to event handler #%d\n",
+ ioc->name, ii));
+ r += (*(MptEvHandlers[ii]))(ioc, pEventReply);
+ handlers++;
+ }
+ }
+ /* FIXME? Examine results here? */
+
+ /*
+ * If needed, send (a single) EventAck.
+ */
+ if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
+ if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
+ devtprintk((MYIOC_s_WARN_FMT "SendEventAck returned %d\n",
+ ioc->name, ii));
+ }
+ }
+
+ *evHandlers = handlers;
+ return r;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mpt_fc_log_info - Log information returned from Fibre Channel IOC.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @log_info: U32 LogInfo reply word from the IOC
+ *
+ * Refer to lsi/fc_log.h.
+ */
+static void
+mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info)
+{
+ static char *subcl_str[8] = {
+ "FCP Initiator", "FCP Target", "LAN", "MPI Message Layer",
+ "FC Link", "Context Manager", "Invalid Field Offset", "State Change Info"
+ };
+ u8 subcl = (log_info >> 24) & 0x7;
+
+ printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubCl={%s}\n",
+ ioc->name, log_info, subcl_str[subcl]);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mpt_sp_log_info - Log information returned from SCSI Parallel IOC.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @mr: Pointer to MPT reply frame
+ * @log_info: U32 LogInfo word from the IOC
+ *
+ * Refer to lsi/sp_log.h.
+ */
+static void
+mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info)
+{
+ u32 info = log_info & 0x00FF0000;
+ char *desc = "unknown";
+
+ switch (info) {
+ case 0x00010000:
+ desc = "bug! MID not found";
+ if (ioc->reload_fw == 0)
+ ioc->reload_fw++;
+ break;
+
+ case 0x00020000:
+ desc = "Parity Error";
+ break;
+
+ case 0x00030000:
+ desc = "ASYNC Outbound Overrun";
+ break;
+
+ case 0x00040000:
+ desc = "SYNC Offset Error";
+ break;
+
+ case 0x00050000:
+ desc = "BM Change";
+ break;
+
+ case 0x00060000:
+ desc = "Msg In Overflow";
+ break;
+
+ case 0x00070000:
+ desc = "DMA Error";
+ break;
+
+ case 0x00080000:
+ desc = "Outbound DMA Overrun";
+ break;
+
+ case 0x00090000:
+ desc = "Task Management";
+ break;
+
+ case 0x000A0000:
+ desc = "Device Problem";
+ break;
+
+ case 0x000B0000:
+ desc = "Invalid Phase Change";
+ break;
+
+ case 0x000C0000:
+ desc = "Untagged Table Size";
+ break;
+
+ }
+
+ printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mpt_sp_ioc_info - IOC information returned from SCSI Parallel IOC.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @ioc_status: U32 IOCStatus word from IOC
+ * @mf: Pointer to MPT request frame
+ *
+ * Refer to lsi/mpi.h.
+ */
+static void
+mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
+{
+ u32 status = ioc_status & MPI_IOCSTATUS_MASK;
+ char *desc = "";
+
+ switch (status) {
+ case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
+ desc = "Invalid Function";
+ break;
+
+ case MPI_IOCSTATUS_BUSY: /* 0x0002 */
+ desc = "Busy";
+ break;
+
+ case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
+ desc = "Invalid SGL";
+ break;
+
+ case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
+ desc = "Internal Error";
+ break;
+
+ case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
+ desc = "Reserved";
+ break;
+
+ case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
+ desc = "Insufficient Resources";
+ break;
+
+ case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
+ desc = "Invalid Field";
+ break;
+
+ case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
+ desc = "Invalid State";
+ break;
+
+ case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
+ case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
+ case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
+ case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
+ case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
+ case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
+ /* No message for Config IOCStatus values */
+ break;
+
+ case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
+ /* No message for recovered error
+ desc = "SCSI Recovered Error";
+ */
+ break;
+
+ case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
+ desc = "SCSI Invalid Bus";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
+ desc = "SCSI Invalid TargetID";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
+ {
+ SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf;
+ U8 cdb = pScsiReq->CDB[0];
+ if (cdb != 0x12) { /* Inquiry is issued for device scanning */
+ desc = "SCSI Device Not There";
+ }
+ break;
+ }
+
+ case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
+ desc = "SCSI Data Overrun";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
+ /* This error is checked in scsi_io_done(). Skip.
+ desc = "SCSI Data Underrun";
+ */
+ break;
+
+ case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
+ desc = "SCSI I/O Data Error";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
+ desc = "SCSI Protocol Error";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
+ desc = "SCSI Task Terminated";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
+ desc = "SCSI Residual Mismatch";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
+ desc = "SCSI Task Management Failed";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
+ desc = "SCSI IOC Terminated";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
+ desc = "SCSI Ext Terminated";
+ break;
+
+ default:
+ desc = "Others";
+ break;
+ }
+ if (desc != "")
+ printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04x): %s\n", ioc->name, status, desc);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+EXPORT_SYMBOL(ioc_list);
+EXPORT_SYMBOL(mpt_proc_root_dir);
+EXPORT_SYMBOL(mpt_register);
+EXPORT_SYMBOL(mpt_deregister);
+EXPORT_SYMBOL(mpt_event_register);
+EXPORT_SYMBOL(mpt_event_deregister);
+EXPORT_SYMBOL(mpt_reset_register);
+EXPORT_SYMBOL(mpt_reset_deregister);
+EXPORT_SYMBOL(mpt_device_driver_register);
+EXPORT_SYMBOL(mpt_device_driver_deregister);
+EXPORT_SYMBOL(mpt_get_msg_frame);
+EXPORT_SYMBOL(mpt_put_msg_frame);
+EXPORT_SYMBOL(mpt_free_msg_frame);
+EXPORT_SYMBOL(mpt_add_sge);
+EXPORT_SYMBOL(mpt_send_handshake_request);
+EXPORT_SYMBOL(mpt_verify_adapter);
+EXPORT_SYMBOL(mpt_GetIocState);
+EXPORT_SYMBOL(mpt_print_ioc_summary);
+EXPORT_SYMBOL(mpt_lan_index);
+EXPORT_SYMBOL(mpt_stm_index);
+EXPORT_SYMBOL(mpt_HardResetHandler);
+EXPORT_SYMBOL(mpt_config);
+EXPORT_SYMBOL(mpt_toolbox);
+EXPORT_SYMBOL(mpt_findImVolumes);
+EXPORT_SYMBOL(mpt_read_ioc_pg_3);
+EXPORT_SYMBOL(mpt_alloc_fw_memory);
+EXPORT_SYMBOL(mpt_free_fw_memory);
+
+static struct pci_driver mptbase_driver = {
+ .name = "mptbase",
+ .id_table = mptbase_pci_table,
+ .probe = mptbase_probe,
+ .remove = __devexit_p(mptbase_remove),
+ .driver = {
+ .shutdown = mptbase_shutdown,
+ },
+#ifdef CONFIG_PM
+ .suspend = mptbase_suspend,
+ .resume = mptbase_resume,
+#endif
+};
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * fusion_init - Fusion MPT base driver initialization routine.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int __init
+fusion_init(void)
+{
+ int i;
+ int r;
+
+ show_mptmod_ver(my_NAME, my_VERSION);
+ printk(KERN_INFO COPYRIGHT "\n");
+
+ for (i = 0; i < MPT_MAX_PROTOCOL_DRIVERS; i++) {
+ MptCallbacks[i] = NULL;
+ MptDriverClass[i] = MPTUNKNOWN_DRIVER;
+ MptEvHandlers[i] = NULL;
+ MptResetHandlers[i] = NULL;
+ }
+
+ /* NEW! 20010120 -sralston
+ * Register ourselves (mptbase) in order to facilitate
+ * EventNotification handling.
+ */
+ mpt_base_index = mpt_register(mpt_base_reply, MPTBASE_DRIVER);
+
+ /* Register for hard reset handling callbacks.
+ */
+ if (mpt_reset_register(mpt_base_index, mpt_ioc_reset) == 0) {
+ dprintk((KERN_INFO MYNAM ": Register for IOC reset notification\n"));
+ } else {
+ /* FIXME! */
+ }
+
+#ifdef CONFIG_PROC_FS
+ (void) procmpt_create();
+#endif
+ r = pci_register_driver(&mptbase_driver);
+ if(r)
+ return(r);
+
+ return r;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * fusion_exit - Perform driver unload cleanup.
+ *
+ * This routine frees all resources associated with each MPT adapter
+ * and removes all %MPT_PROCFS_MPTBASEDIR entries.
+ */
+static void __exit
+fusion_exit(void)
+{
+
+ dexitprintk((KERN_INFO MYNAM ": fusion_exit() called!\n"));
+
+ pci_unregister_driver(&mptbase_driver);
+ mpt_reset_deregister(mpt_base_index);
+
+#ifdef CONFIG_PROC_FS
+ procmpt_destroy();
+#endif
+}
+
+
+module_init(fusion_init);
+module_exit(fusion_exit);