summaryrefslogtreecommitdiffstats
path: root/drivers/mfd/stmpe-spi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd/stmpe-spi.c')
-rw-r--r--drivers/mfd/stmpe-spi.c150
1 files changed, 150 insertions, 0 deletions
diff --git a/drivers/mfd/stmpe-spi.c b/drivers/mfd/stmpe-spi.c
new file mode 100644
index 000000000000..b58c43c7ea93
--- /dev/null
+++ b/drivers/mfd/stmpe-spi.c
@@ -0,0 +1,150 @@
+/*
+ * ST Microelectronics MFD: stmpe's spi client specific driver
+ *
+ * Copyright (C) ST Microelectronics SA 2011
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Viresh Kumar <viresh.kumar@st.com> for ST Microelectronics
+ */
+
+#include <linux/spi/spi.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include "stmpe.h"
+
+#define READ_CMD (1 << 7)
+
+static int spi_reg_read(struct stmpe *stmpe, u8 reg)
+{
+ struct spi_device *spi = stmpe->client;
+ int status = spi_w8r16(spi, reg | READ_CMD);
+
+ return (status < 0) ? status : status >> 8;
+}
+
+static int spi_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
+{
+ struct spi_device *spi = stmpe->client;
+ u16 cmd = (val << 8) | reg;
+
+ return spi_write(spi, (const u8 *)&cmd, 2);
+}
+
+static int spi_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values)
+{
+ int ret, i;
+
+ for (i = 0; i < length; i++) {
+ ret = spi_reg_read(stmpe, reg + i);
+ if (ret < 0)
+ return ret;
+ *(values + i) = ret;
+ }
+
+ return 0;
+}
+
+static int spi_block_write(struct stmpe *stmpe, u8 reg, u8 length,
+ const u8 *values)
+{
+ int ret = 0, i;
+
+ for (i = length; i > 0; i--, reg++) {
+ ret = spi_reg_write(stmpe, reg, *(values + i - 1));
+ if (ret < 0)
+ return ret;
+ }
+
+ return ret;
+}
+
+static void spi_init(struct stmpe *stmpe)
+{
+ struct spi_device *spi = stmpe->client;
+
+ spi->bits_per_word = 8;
+
+ /* This register is only present for stmpe811 */
+ if (stmpe->variant->id_val == 0x0811)
+ spi_reg_write(stmpe, STMPE811_REG_SPI_CFG, spi->mode);
+
+ if (spi_setup(spi) < 0)
+ dev_dbg(&spi->dev, "spi_setup failed\n");
+}
+
+static struct stmpe_client_info spi_ci = {
+ .read_byte = spi_reg_read,
+ .write_byte = spi_reg_write,
+ .read_block = spi_block_read,
+ .write_block = spi_block_write,
+ .init = spi_init,
+};
+
+static int __devinit
+stmpe_spi_probe(struct spi_device *spi)
+{
+ const struct spi_device_id *id = spi_get_device_id(spi);
+
+ /* don't exceed max specified rate - 1MHz - Limitation of STMPE */
+ if (spi->max_speed_hz > 1000000) {
+ dev_dbg(&spi->dev, "f(sample) %d KHz?\n",
+ (spi->max_speed_hz/1000));
+ return -EINVAL;
+ }
+
+ spi_ci.irq = spi->irq;
+ spi_ci.client = spi;
+ spi_ci.dev = &spi->dev;
+
+ return stmpe_probe(&spi_ci, id->driver_data);
+}
+
+static int __devexit stmpe_spi_remove(struct spi_device *spi)
+{
+ struct stmpe *stmpe = dev_get_drvdata(&spi->dev);
+
+ return stmpe_remove(stmpe);
+}
+
+static const struct spi_device_id stmpe_spi_id[] = {
+ { "stmpe610", STMPE610 },
+ { "stmpe801", STMPE801 },
+ { "stmpe811", STMPE811 },
+ { "stmpe1601", STMPE1601 },
+ { "stmpe2401", STMPE2401 },
+ { "stmpe2403", STMPE2403 },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, stmpe_id);
+
+static struct spi_driver stmpe_spi_driver = {
+ .driver = {
+ .name = "stmpe-spi",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &stmpe_dev_pm_ops,
+#endif
+ },
+ .probe = stmpe_spi_probe,
+ .remove = __devexit_p(stmpe_spi_remove),
+ .id_table = stmpe_spi_id,
+};
+
+static int __init stmpe_init(void)
+{
+ return spi_register_driver(&stmpe_spi_driver);
+}
+subsys_initcall(stmpe_init);
+
+static void __exit stmpe_exit(void)
+{
+ spi_unregister_driver(&stmpe_spi_driver);
+}
+module_exit(stmpe_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("STMPE MFD SPI Interface Driver");
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");