summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/card/sdio_uart.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/card/sdio_uart.c')
-rw-r--r--drivers/mmc/card/sdio_uart.c303
1 files changed, 199 insertions, 104 deletions
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index b8e7c5ae981e..f53755533e7e 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -29,6 +29,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/sched.h>
#include <linux/mutex.h>
#include <linux/seq_file.h>
#include <linux/serial_reg.h>
@@ -73,11 +74,10 @@ struct uart_icount {
};
struct sdio_uart_port {
+ struct tty_port port;
struct kref kref;
struct tty_struct *tty;
unsigned int index;
- unsigned int opened;
- struct mutex open_lock;
struct sdio_func *func;
struct mutex func_lock;
struct task_struct *in_sdio_uart_irq;
@@ -87,6 +87,7 @@ struct sdio_uart_port {
struct uart_icount icount;
unsigned int uartclk;
unsigned int mctrl;
+ unsigned int rx_mctrl;
unsigned int read_status_mask;
unsigned int ignore_status_mask;
unsigned char x_char;
@@ -102,7 +103,6 @@ static int sdio_uart_add_port(struct sdio_uart_port *port)
int index, ret = -EBUSY;
kref_init(&port->kref);
- mutex_init(&port->open_lock);
mutex_init(&port->func_lock);
spin_lock_init(&port->write_lock);
@@ -151,6 +151,7 @@ static void sdio_uart_port_put(struct sdio_uart_port *port)
static void sdio_uart_port_remove(struct sdio_uart_port *port)
{
struct sdio_func *func;
+ struct tty_struct *tty;
BUG_ON(sdio_uart_table[port->index] != port);
@@ -165,15 +166,19 @@ static void sdio_uart_port_remove(struct sdio_uart_port *port)
* give up on that port ASAP.
* Beware: the lock ordering is critical.
*/
- mutex_lock(&port->open_lock);
+ mutex_lock(&port->port.mutex);
mutex_lock(&port->func_lock);
func = port->func;
sdio_claim_host(func);
port->func = NULL;
mutex_unlock(&port->func_lock);
- if (port->opened)
- tty_hangup(port->tty);
- mutex_unlock(&port->open_lock);
+ tty = tty_port_tty_get(&port->port);
+ /* tty_hangup is async so is this safe as is ?? */
+ if (tty) {
+ tty_hangup(tty);
+ tty_kref_put(tty);
+ }
+ mutex_unlock(&port->port.mutex);
sdio_release_irq(func);
sdio_disable_func(func);
sdio_release_host(func);
@@ -217,6 +222,8 @@ static unsigned int sdio_uart_get_mctrl(struct sdio_uart_port *port)
unsigned char status;
unsigned int ret;
+ /* FIXME: What stops this losing the delta bits and breaking
+ sdio_uart_check_modem_status ? */
status = sdio_in(port, UART_MSR);
ret = 0;
@@ -391,7 +398,7 @@ static void sdio_uart_stop_rx(struct sdio_uart_port *port)
static void sdio_uart_receive_chars(struct sdio_uart_port *port,
unsigned int *status)
{
- struct tty_struct *tty = port->tty;
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
unsigned int ch, flag;
int max_count = 256;
@@ -428,24 +435,30 @@ static void sdio_uart_receive_chars(struct sdio_uart_port *port,
}
if ((*status & port->ignore_status_mask & ~UART_LSR_OE) == 0)
- tty_insert_flip_char(tty, ch, flag);
+ if (tty)
+ tty_insert_flip_char(tty, ch, flag);
/*
* Overrun is special. Since it's reported immediately,
* it doesn't affect the current character.
*/
if (*status & ~port->ignore_status_mask & UART_LSR_OE)
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ if (tty)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
*status = sdio_in(port, UART_LSR);
} while ((*status & UART_LSR_DR) && (max_count-- > 0));
- tty_flip_buffer_push(tty);
+ if (tty) {
+ tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
+ }
}
static void sdio_uart_transmit_chars(struct sdio_uart_port *port)
{
struct circ_buf *xmit = &port->xmit;
int count;
+ struct tty_struct *tty;
if (port->x_char) {
sdio_out(port, UART_TX, port->x_char);
@@ -453,8 +466,13 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port)
port->x_char = 0;
return;
}
- if (circ_empty(xmit) || port->tty->stopped || port->tty->hw_stopped) {
+
+ tty = tty_port_tty_get(&port->port);
+
+ if (tty == NULL || circ_empty(xmit) ||
+ tty->stopped || tty->hw_stopped) {
sdio_uart_stop_tx(port);
+ tty_kref_put(tty);
return;
}
@@ -468,15 +486,17 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port)
} while (--count > 0);
if (circ_chars_pending(xmit) < WAKEUP_CHARS)
- tty_wakeup(port->tty);
+ tty_wakeup(tty);
if (circ_empty(xmit))
sdio_uart_stop_tx(port);
+ tty_kref_put(tty);
}
static void sdio_uart_check_modem_status(struct sdio_uart_port *port)
{
int status;
+ struct tty_struct *tty;
status = sdio_in(port, UART_MSR);
@@ -487,25 +507,39 @@ static void sdio_uart_check_modem_status(struct sdio_uart_port *port)
port->icount.rng++;
if (status & UART_MSR_DDSR)
port->icount.dsr++;
- if (status & UART_MSR_DDCD)
+ if (status & UART_MSR_DDCD) {
port->icount.dcd++;
+ /* DCD raise - wake for open */
+ if (status & UART_MSR_DCD)
+ wake_up_interruptible(&port->port.open_wait);
+ else {
+ /* DCD drop - hang up if tty attached */
+ tty = tty_port_tty_get(&port->port);
+ if (tty) {
+ tty_hangup(tty);
+ tty_kref_put(tty);
+ }
+ }
+ }
if (status & UART_MSR_DCTS) {
port->icount.cts++;
- if (port->tty->termios->c_cflag & CRTSCTS) {
+ tty = tty_port_tty_get(&port->port);
+ if (tty && (tty->termios->c_cflag & CRTSCTS)) {
int cts = (status & UART_MSR_CTS);
- if (port->tty->hw_stopped) {
+ if (tty->hw_stopped) {
if (cts) {
- port->tty->hw_stopped = 0;
+ tty->hw_stopped = 0;
sdio_uart_start_tx(port);
- tty_wakeup(port->tty);
+ tty_wakeup(tty);
}
} else {
if (!cts) {
- port->tty->hw_stopped = 1;
+ tty->hw_stopped = 1;
sdio_uart_stop_tx(port);
}
}
}
+ tty_kref_put(tty);
}
}
@@ -542,8 +576,62 @@ static void sdio_uart_irq(struct sdio_func *func)
port->in_sdio_uart_irq = NULL;
}
-static int sdio_uart_startup(struct sdio_uart_port *port)
+static int uart_carrier_raised(struct tty_port *tport)
+{
+ struct sdio_uart_port *port =
+ container_of(tport, struct sdio_uart_port, port);
+ unsigned int ret = sdio_uart_claim_func(port);
+ if (ret) /* Missing hardware shoudn't block for carrier */
+ return 1;
+ ret = sdio_uart_get_mctrl(port);
+ sdio_uart_release_func(port);
+ if (ret & TIOCM_CAR)
+ return 1;
+ return 0;
+}
+
+/**
+ * uart_dtr_rts - port helper to set uart signals
+ * @tport: tty port to be updated
+ * @onoff: set to turn on DTR/RTS
+ *
+ * Called by the tty port helpers when the modem signals need to be
+ * adjusted during an open, close and hangup.
+ */
+
+static void uart_dtr_rts(struct tty_port *tport, int onoff)
+{
+ struct sdio_uart_port *port =
+ container_of(tport, struct sdio_uart_port, port);
+ int ret = sdio_uart_claim_func(port);
+ if (ret)
+ return;
+ if (onoff == 0)
+ sdio_uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+ else
+ sdio_uart_set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+ sdio_uart_release_func(port);
+}
+
+/**
+ * sdio_uart_activate - start up hardware
+ * @tport: tty port to activate
+ * @tty: tty bound to this port
+ *
+ * Activate a tty port. The port locking guarantees us this will be
+ * run exactly once per set of opens, and if successful will see the
+ * shutdown method run exactly once to match. Start up and shutdown are
+ * protected from each other by the internal locking and will not run
+ * at the same time even during a hangup event.
+ *
+ * If we successfully start up the port we take an extra kref as we
+ * will keep it around until shutdown when the kref is dropped.
+ */
+
+static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty)
{
+ struct sdio_uart_port *port =
+ container_of(tport, struct sdio_uart_port, port);
unsigned long page;
int ret;
@@ -551,7 +639,7 @@ static int sdio_uart_startup(struct sdio_uart_port *port)
* Set the TTY IO error marker - we will only clear this
* once we have successfully opened the port.
*/
- set_bit(TTY_IO_ERROR, &port->tty->flags);
+ set_bit(TTY_IO_ERROR, &tty->flags);
/* Initialise and allocate the transmit buffer. */
page = __get_free_page(GFP_KERNEL);
@@ -592,19 +680,19 @@ static int sdio_uart_startup(struct sdio_uart_port *port)
*/
sdio_out(port, UART_LCR, UART_LCR_WLEN8);
- port->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE;
+ port->ier = UART_IER_RLSI|UART_IER_RDI|UART_IER_RTOIE|UART_IER_UUE;
port->mctrl = TIOCM_OUT2;
- sdio_uart_change_speed(port, port->tty->termios, NULL);
+ sdio_uart_change_speed(port, tty->termios, NULL);
- if (port->tty->termios->c_cflag & CBAUD)
+ if (tty->termios->c_cflag & CBAUD)
sdio_uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR);
- if (port->tty->termios->c_cflag & CRTSCTS)
+ if (tty->termios->c_cflag & CRTSCTS)
if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS))
- port->tty->hw_stopped = 1;
+ tty->hw_stopped = 1;
- clear_bit(TTY_IO_ERROR, &port->tty->flags);
+ clear_bit(TTY_IO_ERROR, &tty->flags);
/* Kick the IRQ handler once while we're still holding the host lock */
sdio_uart_irq(port->func);
@@ -621,8 +709,20 @@ err1:
return ret;
}
-static void sdio_uart_shutdown(struct sdio_uart_port *port)
+/**
+ * sdio_uart_shutdown - stop hardware
+ * @tport: tty port to shut down
+ *
+ * Deactivate a tty port. The port locking guarantees us this will be
+ * run only if a successful matching activate already ran. The two are
+ * protected from each other by the internal locking and will not run
+ * at the same time even during a hangup event.
+ */
+
+static void sdio_uart_shutdown(struct tty_port *tport)
{
+ struct sdio_uart_port *port =
+ container_of(tport, struct sdio_uart_port, port);
int ret;
ret = sdio_uart_claim_func(port);
@@ -631,12 +731,6 @@ static void sdio_uart_shutdown(struct sdio_uart_port *port)
sdio_uart_stop_rx(port);
- /* TODO: wait here for TX FIFO to drain */
-
- /* Turn off DTR and RTS early. */
- if (port->tty->termios->c_cflag & HUPCL)
- sdio_uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
-
/* Disable interrupts from this port */
sdio_release_irq(port->func);
port->ier = 0;
@@ -661,77 +755,70 @@ skip:
free_page((unsigned long)port->xmit.buf);
}
-static int sdio_uart_open(struct tty_struct *tty, struct file *filp)
+/**
+ * sdio_uart_install - install method
+ * @driver: the driver in use (sdio_uart in our case)
+ * @tty: the tty being bound
+ *
+ * Look up and bind the tty and the driver together. Initialize
+ * any needed private data (in our case the termios)
+ */
+
+static int sdio_uart_install(struct tty_driver *driver, struct tty_struct *tty)
{
- struct sdio_uart_port *port;
- int ret;
+ int idx = tty->index;
+ struct sdio_uart_port *port = sdio_uart_port_get(idx);
+ int ret = tty_init_termios(tty);
+
+ if (ret == 0) {
+ tty_driver_kref_get(driver);
+ tty->count++;
+ /* This is the ref sdio_uart_port get provided */
+ tty->driver_data = port;
+ driver->ttys[idx] = tty;
+ } else
+ sdio_uart_port_put(port);
+ return ret;
+}
- port = sdio_uart_port_get(tty->index);
- if (!port)
- return -ENODEV;
+/**
+ * sdio_uart_cleanup - called on the last tty kref drop
+ * @tty: the tty being destroyed
+ *
+ * Called asynchronously when the last reference to the tty is dropped.
+ * We cannot destroy the tty->driver_data port kref until this point
+ */
- mutex_lock(&port->open_lock);
+static void sdio_uart_cleanup(struct tty_struct *tty)
+{
+ struct sdio_uart_port *port = tty->driver_data;
+ tty->driver_data = NULL; /* Bug trap */
+ sdio_uart_port_put(port);
+}
- /*
- * Make sure not to mess up with a dead port
- * which has not been closed yet.
- */
- if (tty->driver_data && tty->driver_data != port) {
- mutex_unlock(&port->open_lock);
- sdio_uart_port_put(port);
- return -EBUSY;
- }
+/*
+ * Open/close/hangup is now entirely boilerplate
+ */
- if (!port->opened) {
- tty->driver_data = port;
- port->tty = tty;
- ret = sdio_uart_startup(port);
- if (ret) {
- tty->driver_data = NULL;
- port->tty = NULL;
- mutex_unlock(&port->open_lock);
- sdio_uart_port_put(port);
- return ret;
- }
- }
- port->opened++;
- mutex_unlock(&port->open_lock);
- return 0;
+static int sdio_uart_open(struct tty_struct *tty, struct file *filp)
+{
+ struct sdio_uart_port *port = tty->driver_data;
+ return tty_port_open(&port->port, tty, filp);
}
static void sdio_uart_close(struct tty_struct *tty, struct file * filp)
{
struct sdio_uart_port *port = tty->driver_data;
+ tty_port_close(&port->port, tty, filp);
+}
- if (!port)
- return;
-
- mutex_lock(&port->open_lock);
- BUG_ON(!port->opened);
-
- /*
- * This is messy. The tty layer calls us even when open()
- * returned an error. Ignore this close request if tty->count
- * is larger than port->count.
- */
- if (tty->count > port->opened) {
- mutex_unlock(&port->open_lock);
- return;
- }
-
- if (--port->opened == 0) {
- tty->closing = 1;
- sdio_uart_shutdown(port);
- tty_ldisc_flush(tty);
- port->tty = NULL;
- tty->driver_data = NULL;
- tty->closing = 0;
- }
- mutex_unlock(&port->open_lock);
- sdio_uart_port_put(port);
+static void sdio_uart_hangup(struct tty_struct *tty)
+{
+ struct sdio_uart_port *port = tty->driver_data;
+ tty_port_hangup(&port->port);
}
-static int sdio_uart_write(struct tty_struct * tty, const unsigned char *buf,
+static int sdio_uart_write(struct tty_struct *tty, const unsigned char *buf,
int count)
{
struct sdio_uart_port *port = tty->driver_data;
@@ -756,7 +843,7 @@ static int sdio_uart_write(struct tty_struct * tty, const unsigned char *buf,
}
spin_unlock(&port->write_lock);
- if ( !(port->ier & UART_IER_THRI)) {
+ if (!(port->ier & UART_IER_THRI)) {
int err = sdio_uart_claim_func(port);
if (!err) {
sdio_uart_start_tx(port);
@@ -843,17 +930,12 @@ static void sdio_uart_unthrottle(struct tty_struct *tty)
sdio_uart_release_func(port);
}
-static void sdio_uart_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+static void sdio_uart_set_termios(struct tty_struct *tty,
+ struct ktermios *old_termios)
{
struct sdio_uart_port *port = tty->driver_data;
unsigned int cflag = tty->termios->c_cflag;
-#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-
- if ((cflag ^ old_termios->c_cflag) == 0 &&
- RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0)
- return;
-
if (sdio_uart_claim_func(port) != 0)
return;
@@ -928,7 +1010,7 @@ static int sdio_uart_tiocmset(struct tty_struct *tty, struct file *file,
int result;
result = sdio_uart_claim_func(port);
- if(!result) {
+ if (!result) {
sdio_uart_update_mctrl(port, set, clear);
sdio_uart_release_func(port);
}
@@ -946,7 +1028,7 @@ static int sdio_uart_proc_show(struct seq_file *m, void *v)
struct sdio_uart_port *port = sdio_uart_port_get(i);
if (port) {
seq_printf(m, "%d: uart:SDIO", i);
- if(capable(CAP_SYS_ADMIN)) {
+ if (capable(CAP_SYS_ADMIN)) {
seq_printf(m, " tx:%d rx:%d",
port->icount.tx, port->icount.rx);
if (port->icount.frame)
@@ -994,6 +1076,13 @@ static const struct file_operations sdio_uart_proc_fops = {
.release = single_release,
};
+static const struct tty_port_operations sdio_uart_port_ops = {
+ .dtr_rts = uart_dtr_rts,
+ .carrier_raised = uart_carrier_raised,
+ .shutdown = sdio_uart_shutdown,
+ .activate = sdio_uart_activate,
+};
+
static const struct tty_operations sdio_uart_ops = {
.open = sdio_uart_open,
.close = sdio_uart_close,
@@ -1004,9 +1093,12 @@ static const struct tty_operations sdio_uart_ops = {
.throttle = sdio_uart_throttle,
.unthrottle = sdio_uart_unthrottle,
.set_termios = sdio_uart_set_termios,
+ .hangup = sdio_uart_hangup,
.break_ctl = sdio_uart_break_ctl,
.tiocmget = sdio_uart_tiocmget,
.tiocmset = sdio_uart_tiocmset,
+ .install = sdio_uart_install,
+ .cleanup = sdio_uart_cleanup,
.proc_fops = &sdio_uart_proc_fops,
};
@@ -1043,7 +1135,7 @@ static int sdio_uart_probe(struct sdio_func *func,
}
if (!tpl) {
printk(KERN_WARNING
- "%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n",
+ "%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n",
sdio_func_id(func));
kfree(port);
return -EINVAL;
@@ -1068,13 +1160,16 @@ static int sdio_uart_probe(struct sdio_func *func,
port->func = func;
sdio_set_drvdata(func, port);
+ tty_port_init(&port->port);
+ port->port.ops = &sdio_uart_port_ops;
ret = sdio_uart_add_port(port);
if (ret) {
kfree(port);
} else {
struct device *dev;
- dev = tty_register_device(sdio_uart_tty_driver, port->index, &func->dev);
+ dev = tty_register_device(sdio_uart_tty_driver,
+ port->index, &func->dev);
if (IS_ERR(dev)) {
sdio_uart_port_remove(port);
ret = PTR_ERR(dev);