diff options
Diffstat (limited to 'drivers/mmc/host')
| -rw-r--r-- | drivers/mmc/host/Kconfig | 66 | ||||
| -rw-r--r-- | drivers/mmc/host/Makefile | 7 | ||||
| -rw-r--r-- | drivers/mmc/host/atmel-mci-regs.h | 33 | ||||
| -rw-r--r-- | drivers/mmc/host/cb710-mmc.c | 804 | ||||
| -rw-r--r-- | drivers/mmc/host/cb710-mmc.h | 104 | ||||
| -rw-r--r-- | drivers/mmc/host/imxmmc.c | 2 | ||||
| -rw-r--r-- | drivers/mmc/host/mmc_spi.c | 29 | ||||
| -rw-r--r-- | drivers/mmc/host/mmci.c | 2 | ||||
| -rw-r--r-- | drivers/mmc/host/mvsdio.c | 4 | ||||
| -rw-r--r-- | drivers/mmc/host/mxcmmc.c | 2 | ||||
| -rw-r--r-- | drivers/mmc/host/omap.c | 3 | ||||
| -rw-r--r-- | drivers/mmc/host/omap_hsmmc.c | 6 | ||||
| -rw-r--r-- | drivers/mmc/host/pxamci.c | 50 | ||||
| -rw-r--r-- | drivers/mmc/host/s3cmci.c | 7 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-of.c | 13 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-pci.c | 20 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-pltfm.c | 168 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-s3c.c | 428 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci.c | 123 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci.h | 9 | ||||
| -rw-r--r-- | drivers/mmc/host/tmio_mmc.c | 180 | ||||
| -rw-r--r-- | drivers/mmc/host/tmio_mmc.h | 77 | ||||
| -rw-r--r-- | drivers/mmc/host/via-sdmmc.c | 1362 |
23 files changed, 3324 insertions, 175 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index b4cf691f3f64..891ef18bd77b 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -83,6 +83,42 @@ config MMC_SDHCI_OF If unsure, say N. +config MMC_SDHCI_PLTFM + tristate "SDHCI support on the platform specific bus" + depends on MMC_SDHCI + help + This selects the platform specific bus support for Secure Digital Host + Controller Interface. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + +config MMC_SDHCI_S3C + tristate "SDHCI support on Samsung S3C SoC" + depends on MMC_SDHCI && (PLAT_S3C24XX || PLAT_S3C64XX) + help + This selects the Secure Digital Host Controller Interface (SDHCI) + often referrered to as the HSMMC block in some of the Samsung S3C + range of SoC. + + Note, due to the problems with DMA, the DMA support is only + available with CONFIG_EXPERIMENTAL is selected. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + +config MMC_SDHCI_S3C_DMA + bool "DMA support on S3C SDHCI" + depends on MMC_SDHCI_S3C && EXPERIMENTAL + help + Enable DMA support on the Samsung S3C SDHCI glue. The DMA + has proved to be problematic if the controller encounters + certain errors, and thus should be treated with care. + + YMMV. + config MMC_OMAP tristate "TI OMAP Multimedia Card Interface support" depends on ARCH_OMAP @@ -155,7 +191,7 @@ config MMC_ATMELMCI_DMA config MMC_IMX tristate "Motorola i.MX Multimedia Card Interface support" - depends on ARCH_IMX + depends on ARCH_MX1 help This selects the Motorola i.MX Multimedia card Interface. If you have a i.MX platform with a Multimedia Card slot, @@ -237,7 +273,31 @@ config MMC_SDRICOH_CS config MMC_TMIO tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support" - depends on MFD_TMIO + depends on MFD_TMIO || MFD_ASIC3 help This provides support for the SD/MMC cell found in TC6393XB, - T7L66XB and also ipaq ASIC3 + T7L66XB and also HTC ASIC3 + +config MMC_CB710 + tristate "ENE CB710 MMC/SD Interface support" + depends on PCI + select CB710_CORE + help + This option enables support for MMC/SD part of ENE CB710/720 Flash + memory card reader found in some laptops (ie. some versions of + HP Compaq nx9500). + + This driver can also be built as a module. If so, the module + will be called cb710-mmc. + +config MMC_VIA_SDMMC + tristate "VIA SD/MMC Card Reader Driver" + depends on PCI + help + This selects the VIA SD/MMC Card Reader driver, say Y or M here. + VIA provides one multi-functional card reader which integrated into + some motherboards manufactured by VIA. This card reader supports + SD/MMC/SDHC. + If you have a controller with this interface, say Y or M here. + + If unsure, say N. diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 970a997620e1..cf153f628457 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -14,6 +14,8 @@ obj-$(CONFIG_MMC_SDHCI) += sdhci.o obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o +obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o +obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o obj-$(CONFIG_MMC_WBSD) += wbsd.o obj-$(CONFIG_MMC_AU1X) += au1xmmc.o obj-$(CONFIG_MMC_OMAP) += omap.o @@ -29,4 +31,9 @@ endif obj-$(CONFIG_MMC_S3C) += s3cmci.o obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o +obj-$(CONFIG_MMC_CB710) += cb710-mmc.o +obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o +ifeq ($(CONFIG_CB710_DEBUG),y) + CFLAGS-cb710-mmc += -DDEBUG +endif diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h index b58364ed6bba..fc8a0fe7c5c5 100644 --- a/drivers/mmc/host/atmel-mci-regs.h +++ b/drivers/mmc/host/atmel-mci-regs.h @@ -7,6 +7,12 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +/* + * Superset of MCI IP registers integrated in Atmel AVR32 and AT91 Processors + * Registers and bitfields marked with [2] are only available in MCI2 + */ + #ifndef __DRIVERS_MMC_ATMEL_MCI_H__ #define __DRIVERS_MMC_ATMEL_MCI_H__ @@ -14,11 +20,17 @@ #define MCI_CR 0x0000 /* Control */ # define MCI_CR_MCIEN ( 1 << 0) /* MCI Enable */ # define MCI_CR_MCIDIS ( 1 << 1) /* MCI Disable */ +# define MCI_CR_PWSEN ( 1 << 2) /* Power Save Enable */ +# define MCI_CR_PWSDIS ( 1 << 3) /* Power Save Disable */ # define MCI_CR_SWRST ( 1 << 7) /* Software Reset */ #define MCI_MR 0x0004 /* Mode */ # define MCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */ +# define MCI_MR_PWSDIV(x) ((x) << 8) /* Power Saving Divider */ # define MCI_MR_RDPROOF ( 1 << 11) /* Read Proof */ # define MCI_MR_WRPROOF ( 1 << 12) /* Write Proof */ +# define MCI_MR_PDCFBYTE ( 1 << 13) /* Force Byte Transfer */ +# define MCI_MR_PDCPADV ( 1 << 14) /* Padding Value */ +# define MCI_MR_PDCMODE ( 1 << 15) /* PDC-oriented Mode */ #define MCI_DTOR 0x0008 /* Data Timeout */ # define MCI_DTOCYC(x) ((x) << 0) /* Data Timeout Cycles */ # define MCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */ @@ -28,6 +40,7 @@ # define MCI_SDCSEL_MASK ( 3 << 0) # define MCI_SDCBUS_1BIT ( 0 << 6) /* 1-bit data bus */ # define MCI_SDCBUS_4BIT ( 2 << 6) /* 4-bit data bus */ +# define MCI_SDCBUS_8BIT ( 3 << 6) /* 8-bit data bus[2] */ # define MCI_SDCBUS_MASK ( 3 << 6) #define MCI_ARGR 0x0010 /* Command Argument */ #define MCI_CMDR 0x0014 /* Command */ @@ -56,6 +69,9 @@ #define MCI_BLKR 0x0018 /* Block */ # define MCI_BCNT(x) ((x) << 0) /* Data Block Count */ # define MCI_BLKLEN(x) ((x) << 16) /* Data Block Length */ +#define MCI_CSTOR 0x001c /* Completion Signal Timeout[2] */ +# define MCI_CSTOCYC(x) ((x) << 0) /* CST cycles */ +# define MCI_CSTOMUL(x) ((x) << 4) /* CST multiplier */ #define MCI_RSPR 0x0020 /* Response 0 */ #define MCI_RSPR1 0x0024 /* Response 1 */ #define MCI_RSPR2 0x0028 /* Response 2 */ @@ -83,7 +99,24 @@ # define MCI_DTOE ( 1 << 22) /* Data Time-Out Error */ # define MCI_OVRE ( 1 << 30) /* RX Overrun Error */ # define MCI_UNRE ( 1 << 31) /* TX Underrun Error */ +#define MCI_DMA 0x0050 /* DMA Configuration[2] */ +# define MCI_DMA_OFFSET(x) ((x) << 0) /* DMA Write Buffer Offset */ +# define MCI_DMA_CHKSIZE(x) ((x) << 4) /* DMA Channel Read and Write Chunk Size */ +# define MCI_DMAEN ( 1 << 8) /* DMA Hardware Handshaking Enable */ +#define MCI_CFG 0x0054 /* Configuration[2] */ +# define MCI_CFG_FIFOMODE_1DATA ( 1 << 0) /* MCI Internal FIFO control mode */ +# define MCI_CFG_FERRCTRL_COR ( 1 << 4) /* Flow Error flag reset control mode */ +# define MCI_CFG_HSMODE ( 1 << 8) /* High Speed Mode */ +# define MCI_CFG_LSYNC ( 1 << 12) /* Synchronize on the last block */ +#define MCI_WPMR 0x00e4 /* Write Protection Mode[2] */ +# define MCI_WP_EN ( 1 << 0) /* WP Enable */ +# define MCI_WP_KEY (0x4d4349 << 8) /* WP Key */ +#define MCI_WPSR 0x00e8 /* Write Protection Status[2] */ +# define MCI_GET_WP_VS(x) ((x) & 0x0f) +# define MCI_GET_WP_VSRC(x) (((x) >> 8) & 0xffff) +#define MCI_FIFO_APERTURE 0x0200 /* FIFO Aperture[2] */ +/* This is not including the FIFO Aperture on MCI2 */ #define MCI_REGS_SIZE 0x100 /* Register access macros */ diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c new file mode 100644 index 000000000000..4e72964a7b43 --- /dev/null +++ b/drivers/mmc/host/cb710-mmc.c @@ -0,0 +1,804 @@ +/* + * cb710/mmc.c + * + * Copyright by Michał Mirosław, 2008-2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include "cb710-mmc.h" + +static const u8 cb710_clock_divider_log2[8] = { +/* 1, 2, 4, 8, 16, 32, 128, 512 */ + 0, 1, 2, 3, 4, 5, 7, 9 +}; +#define CB710_MAX_DIVIDER_IDX \ + (ARRAY_SIZE(cb710_clock_divider_log2) - 1) + +static const u8 cb710_src_freq_mhz[16] = { + 33, 10, 20, 25, 30, 35, 40, 45, + 50, 55, 60, 65, 70, 75, 80, 85 +}; + +static void cb710_mmc_set_clock(struct mmc_host *mmc, int hz) +{ + struct cb710_slot *slot = cb710_mmc_to_slot(mmc); + struct pci_dev *pdev = cb710_slot_to_chip(slot)->pdev; + u32 src_freq_idx; + u32 divider_idx; + int src_hz; + + /* this is magic, unverifiable for me, unless I get + * MMC card with cables connected to bus signals */ + pci_read_config_dword(pdev, 0x48, &src_freq_idx); + src_freq_idx = (src_freq_idx >> 16) & 0xF; + src_hz = cb710_src_freq_mhz[src_freq_idx] * 1000000; + + for (divider_idx = 0; divider_idx < CB710_MAX_DIVIDER_IDX; ++divider_idx) { + if (hz >= src_hz >> cb710_clock_divider_log2[divider_idx]) + break; + } + + if (src_freq_idx) + divider_idx |= 0x8; + + cb710_pci_update_config_reg(pdev, 0x40, ~0xF0000000, divider_idx << 28); + + dev_dbg(cb710_slot_dev(slot), + "clock set to %d Hz, wanted %d Hz; flag = %d\n", + src_hz >> cb710_clock_divider_log2[divider_idx & 7], + hz, (divider_idx & 8) != 0); +} + +static void __cb710_mmc_enable_irq(struct cb710_slot *slot, + unsigned short enable, unsigned short mask) +{ + /* clear global IE + * - it gets set later if any interrupt sources are enabled */ + mask |= CB710_MMC_IE_IRQ_ENABLE; + + /* look like interrupt is fired whenever + * WORD[0x0C] & WORD[0x10] != 0; + * -> bit 15 port 0x0C seems to be global interrupt enable + */ + + enable = (cb710_read_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT) + & ~mask) | enable; + + if (enable) + enable |= CB710_MMC_IE_IRQ_ENABLE; + + cb710_write_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT, enable); +} + +static void cb710_mmc_enable_irq(struct cb710_slot *slot, + unsigned short enable, unsigned short mask) +{ + struct cb710_mmc_reader *reader = mmc_priv(cb710_slot_to_mmc(slot)); + unsigned long flags; + + spin_lock_irqsave(&reader->irq_lock, flags); + /* this is the only thing irq_lock protects */ + __cb710_mmc_enable_irq(slot, enable, mask); + spin_unlock_irqrestore(&reader->irq_lock, flags); +} + +static void cb710_mmc_reset_events(struct cb710_slot *slot) +{ + cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, 0xFF); + cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, 0xFF); + cb710_write_port_8(slot, CB710_MMC_STATUS2_PORT, 0xFF); +} + +static int cb710_mmc_is_card_inserted(struct cb710_slot *slot) +{ + return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT) + & CB710_MMC_S3_CARD_DETECTED; +} + +static void cb710_mmc_enable_4bit_data(struct cb710_slot *slot, int enable) +{ + dev_dbg(cb710_slot_dev(slot), "configuring %d-data-line%s mode\n", + enable ? 4 : 1, enable ? "s" : ""); + if (enable) + cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, + CB710_MMC_C1_4BIT_DATA_BUS, 0); + else + cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, + 0, CB710_MMC_C1_4BIT_DATA_BUS); +} + +static int cb710_check_event(struct cb710_slot *slot, u8 what) +{ + u16 status; + + status = cb710_read_port_16(slot, CB710_MMC_STATUS_PORT); + + if (status & CB710_MMC_S0_FIFO_UNDERFLOW) { + /* it is just a guess, so log it */ + dev_dbg(cb710_slot_dev(slot), + "CHECK : ignoring bit 6 in status %04X\n", status); + cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, + CB710_MMC_S0_FIFO_UNDERFLOW); + status &= ~CB710_MMC_S0_FIFO_UNDERFLOW; + } + + if (status & CB710_MMC_STATUS_ERROR_EVENTS) { + dev_dbg(cb710_slot_dev(slot), + "CHECK : returning EIO on status %04X\n", status); + cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, status & 0xFF); + cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, + CB710_MMC_S1_RESET); + return -EIO; + } + + /* 'what' is a bit in MMC_STATUS1 */ + if ((status >> 8) & what) { + cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, what); + return 1; + } + + return 0; +} + +static int cb710_wait_for_event(struct cb710_slot *slot, u8 what) +{ + int err = 0; + unsigned limit = 2000000; /* FIXME: real timeout */ + +#ifdef CONFIG_CB710_DEBUG + u32 e, x; + e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT); +#endif + + while (!(err = cb710_check_event(slot, what))) { + if (!--limit) { + cb710_dump_regs(cb710_slot_to_chip(slot), + CB710_DUMP_REGS_MMC); + err = -ETIMEDOUT; + break; + } + udelay(1); + } + +#ifdef CONFIG_CB710_DEBUG + x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT); + + limit = 2000000 - limit; + if (limit > 100) + dev_dbg(cb710_slot_dev(slot), + "WAIT10: waited %d loops, what %d, entry val %08X, exit val %08X\n", + limit, what, e, x); +#endif + return err < 0 ? err : 0; +} + + +static int cb710_wait_while_busy(struct cb710_slot *slot, uint8_t mask) +{ + unsigned limit = 500000; /* FIXME: real timeout */ + int err = 0; + +#ifdef CONFIG_CB710_DEBUG + u32 e, x; + e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT); +#endif + + while (cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & mask) { + if (!--limit) { + cb710_dump_regs(cb710_slot_to_chip(slot), + CB710_DUMP_REGS_MMC); + err = -ETIMEDOUT; + break; + } + udelay(1); + } + +#ifdef CONFIG_CB710_DEBUG + x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT); + + limit = 500000 - limit; + if (limit > 100) + dev_dbg(cb710_slot_dev(slot), + "WAIT12: waited %d loops, mask %02X, entry val %08X, exit val %08X\n", + limit, mask, e, x); +#endif + return 0; +} + +static void cb710_mmc_set_transfer_size(struct cb710_slot *slot, + size_t count, size_t blocksize) +{ + cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); + cb710_write_port_32(slot, CB710_MMC_TRANSFER_SIZE_PORT, + ((count - 1) << 16)|(blocksize - 1)); + + dev_vdbg(cb710_slot_dev(slot), "set up for %zu block%s of %zu bytes\n", + count, count == 1 ? "" : "s", blocksize); +} + +static void cb710_mmc_fifo_hack(struct cb710_slot *slot) +{ + /* without this, received data is prepended with 8-bytes of zeroes */ + u32 r1, r2; + int ok = 0; + + r1 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT); + r2 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT); + if (cb710_read_port_8(slot, CB710_MMC_STATUS0_PORT) + & CB710_MMC_S0_FIFO_UNDERFLOW) { + cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, + CB710_MMC_S0_FIFO_UNDERFLOW); + ok = 1; + } + + dev_dbg(cb710_slot_dev(slot), + "FIFO-read-hack: expected STATUS0 bit was %s\n", + ok ? "set." : "NOT SET!"); + dev_dbg(cb710_slot_dev(slot), + "FIFO-read-hack: dwords ignored: %08X %08X - %s\n", + r1, r2, (r1|r2) ? "BAD (NOT ZERO)!" : "ok"); +} + +static int cb710_mmc_receive_pio(struct cb710_slot *slot, + struct sg_mapping_iter *miter, size_t dw_count) +{ + if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & CB710_MMC_S2_FIFO_READY)) { + int err = cb710_wait_for_event(slot, + CB710_MMC_S1_PIO_TRANSFER_DONE); + if (err) + return err; + } + + cb710_sg_dwiter_write_from_io(miter, + slot->iobase + CB710_MMC_DATA_PORT, dw_count); + + return 0; +} + +static bool cb710_is_transfer_size_supported(struct mmc_data *data) +{ + return !(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8)); +} + +static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data) +{ + struct sg_mapping_iter miter; + size_t len, blocks = data->blocks; + int err = 0; + + /* TODO: I don't know how/if the hardware handles non-16B-boundary blocks + * except single 8B block */ + if (unlikely(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8))) + return -EINVAL; + + sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_TO_SG); + + cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, + 15, CB710_MMC_C2_READ_PIO_SIZE_MASK); + + cb710_mmc_fifo_hack(slot); + + while (blocks-- > 0) { + len = data->blksz; + + while (len >= 16) { + err = cb710_mmc_receive_pio(slot, &miter, 4); + if (err) + goto out; + len -= 16; + } + + if (!len) + continue; + + cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, + len - 1, CB710_MMC_C2_READ_PIO_SIZE_MASK); + + len = (len >= 8) ? 4 : 2; + err = cb710_mmc_receive_pio(slot, &miter, len); + if (err) + goto out; + } +out: + sg_miter_stop(&miter); + return err; +} + +static int cb710_mmc_send(struct cb710_slot *slot, struct mmc_data *data) +{ + struct sg_mapping_iter miter; + size_t len, blocks = data->blocks; + int err = 0; + + /* TODO: I don't know how/if the hardware handles multiple + * non-16B-boundary blocks */ + if (unlikely(data->blocks > 1 && data->blksz & 15)) + return -EINVAL; + + sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_FROM_SG); + + cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, + 0, CB710_MMC_C2_READ_PIO_SIZE_MASK); + + while (blocks-- > 0) { + len = (data->blksz + 15) >> 4; + do { + if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) + & CB710_MMC_S2_FIFO_EMPTY)) { + err = cb710_wait_for_event(slot, + CB710_MMC_S1_PIO_TRANSFER_DONE); + if (err) + goto out; + } + cb710_sg_dwiter_read_to_io(&miter, + slot->iobase + CB710_MMC_DATA_PORT, 4); + } while (--len); + } +out: + sg_miter_stop(&miter); + return err; +} + +static u16 cb710_encode_cmd_flags(struct cb710_mmc_reader *reader, + struct mmc_command *cmd) +{ + unsigned int flags = cmd->flags; + u16 cb_flags = 0; + + /* Windows driver returned 0 for commands for which no response + * is expected. It happened that there were only two such commands + * used: MMC_GO_IDLE_STATE and MMC_GO_INACTIVE_STATE so it might + * as well be a bug in that driver. + * + * Original driver set bit 14 for MMC/SD application + * commands. There's no difference 'on the wire' and + * it apparently works without it anyway. + */ + + switch (flags & MMC_CMD_MASK) { + case MMC_CMD_AC: cb_flags = CB710_MMC_CMD_AC; break; + case MMC_CMD_ADTC: cb_flags = CB710_MMC_CMD_ADTC; break; + case MMC_CMD_BC: cb_flags = CB710_MMC_CMD_BC; break; + case MMC_CMD_BCR: cb_flags = CB710_MMC_CMD_BCR; break; + } + + if (flags & MMC_RSP_BUSY) + cb_flags |= CB710_MMC_RSP_BUSY; + + cb_flags |= cmd->opcode << CB710_MMC_CMD_CODE_SHIFT; + + if (cmd->data && (cmd->data->flags & MMC_DATA_READ)) + cb_flags |= CB710_MMC_DATA_READ; + + if (flags & MMC_RSP_PRESENT) { + /* Windows driver set 01 at bits 4,3 except for + * MMC_SET_BLOCKLEN where it set 10. Maybe the + * hardware can do something special about this + * command? The original driver looks buggy/incomplete + * anyway so we ignore this for now. + * + * I assume that 00 here means no response is expected. + */ + cb_flags |= CB710_MMC_RSP_PRESENT; + + if (flags & MMC_RSP_136) + cb_flags |= CB710_MMC_RSP_136; + if (!(flags & MMC_RSP_CRC)) + cb_flags |= CB710_MMC_RSP_NO_CRC; + } + + return cb_flags; +} + +static void cb710_receive_response(struct cb710_slot *slot, + struct mmc_command *cmd) +{ + unsigned rsp_opcode, wanted_opcode; + + /* Looks like final byte with CRC is always stripped (same as SDHCI) */ + if (cmd->flags & MMC_RSP_136) { + u32 resp[4]; + + resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE3_PORT); + resp[1] = cb710_read_port_32(slot, CB710_MMC_RESPONSE2_PORT); + resp[2] = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT); + resp[3] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT); + rsp_opcode = resp[0] >> 24; + + cmd->resp[0] = (resp[0] << 8)|(resp[1] >> 24); + cmd->resp[1] = (resp[1] << 8)|(resp[2] >> 24); + cmd->resp[2] = (resp[2] << 8)|(resp[3] >> 24); + cmd->resp[3] = (resp[3] << 8); + } else { + rsp_opcode = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT) & 0x3F; + cmd->resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT); + } + + wanted_opcode = (cmd->flags & MMC_RSP_OPCODE) ? cmd->opcode : 0x3F; + if (rsp_opcode != wanted_opcode) + cmd->error = -EILSEQ; +} + +static int cb710_mmc_transfer_data(struct cb710_slot *slot, + struct mmc_data *data) +{ + int error, to; + + if (data->flags & MMC_DATA_READ) + error = cb710_mmc_receive(slot, data); + else + error = cb710_mmc_send(slot, data); + + to = cb710_wait_for_event(slot, CB710_MMC_S1_DATA_TRANSFER_DONE); + if (!error) + error = to; + + if (!error) + data->bytes_xfered = data->blksz * data->blocks; + return error; +} + +static int cb710_mmc_command(struct mmc_host *mmc, struct mmc_command *cmd) +{ + struct cb710_slot *slot = cb710_mmc_to_slot(mmc); + struct cb710_mmc_reader *reader = mmc_priv(mmc); + struct mmc_data *data = cmd->data; + + u16 cb_cmd = cb710_encode_cmd_flags(reader, cmd); + dev_dbg(cb710_slot_dev(slot), "cmd request: 0x%04X\n", cb_cmd); + + if (data) { + if (!cb710_is_transfer_size_supported(data)) { + data->error = -EINVAL; + return -1; + } + cb710_mmc_set_transfer_size(slot, data->blocks, data->blksz); + } + + cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20|CB710_MMC_S2_BUSY_10); + cb710_write_port_16(slot, CB710_MMC_CMD_TYPE_PORT, cb_cmd); + cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); + cb710_write_port_32(slot, CB710_MMC_CMD_PARAM_PORT, cmd->arg); + cb710_mmc_reset_events(slot); + cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); + cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x01, 0); + + cmd->error = cb710_wait_for_event(slot, CB710_MMC_S1_COMMAND_SENT); + if (cmd->error) + return -1; + + if (cmd->flags & MMC_RSP_PRESENT) { + cb710_receive_response(slot, cmd); + if (cmd->error) + return -1; + } + + if (data) + data->error = cb710_mmc_transfer_data(slot, data); + return 0; +} + +static void cb710_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct cb710_slot *slot = cb710_mmc_to_slot(mmc); + struct cb710_mmc_reader *reader = mmc_priv(mmc); + + WARN_ON(reader->mrq != NULL); + + reader->mrq = mrq; + cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0); + + if (cb710_mmc_is_card_inserted(slot)) { + if (!cb710_mmc_command(mmc, mrq->cmd) && mrq->stop) + cb710_mmc_command(mmc, mrq->stop); + mdelay(1); + } else { + mrq->cmd->error = -ENOMEDIUM; + } + + tasklet_schedule(&reader->finish_req_tasklet); +} + +static int cb710_mmc_powerup(struct cb710_slot *slot) +{ +#ifdef CONFIG_CB710_DEBUG + struct cb710_chip *chip = cb710_slot_to_chip(slot); +#endif + int err; + + /* a lot of magic; see comment in cb710_mmc_set_clock() */ + dev_dbg(cb710_slot_dev(slot), "bus powerup\n"); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); + if (unlikely(err)) + return err; + cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x80, 0); + cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x80, 0); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + mdelay(1); + dev_dbg(cb710_slot_dev(slot), "after delay 1\n"); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); + if (unlikely(err)) + return err; + cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x09, 0); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + mdelay(1); + dev_dbg(cb710_slot_dev(slot), "after delay 2\n"); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); + if (unlikely(err)) + return err; + cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x08); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + mdelay(2); + dev_dbg(cb710_slot_dev(slot), "after delay 3\n"); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0); + cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x70, 0); + cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, 0x80, 0); + cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x03, 0); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); + if (unlikely(err)) + return err; + /* This port behaves weird: quick byte reads of 0x08,0x09 return + * 0xFF,0x00 after writing 0xFFFF to 0x08; it works correctly when + * read/written from userspace... What am I missing here? + * (it doesn't depend on write-to-read delay) */ + cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0xFFFF); + cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + dev_dbg(cb710_slot_dev(slot), "bus powerup finished\n"); + + return cb710_check_event(slot, 0); +} + +static void cb710_mmc_powerdown(struct cb710_slot *slot) +{ + cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x81); + cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0, 0x80); +} + +static void cb710_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct cb710_slot *slot = cb710_mmc_to_slot(mmc); + struct cb710_mmc_reader *reader = mmc_priv(mmc); + int err; + + cb710_mmc_set_clock(mmc, ios->clock); + + if (!cb710_mmc_is_card_inserted(slot)) { + dev_dbg(cb710_slot_dev(slot), + "no card inserted - ignoring bus powerup request\n"); + ios->power_mode = MMC_POWER_OFF; + } + + if (ios->power_mode != reader->last_power_mode) + switch (ios->power_mode) { + case MMC_POWER_ON: + err = cb710_mmc_powerup(slot); + if (err) { + dev_warn(cb710_slot_dev(slot), + "powerup failed (%d)- retrying\n", err); + cb710_mmc_powerdown(slot); + udelay(1); + err = cb710_mmc_powerup(slot); + if (err) + dev_warn(cb710_slot_dev(slot), + "powerup retry failed (%d) - expect errors\n", + err); + } + reader->last_power_mode = MMC_POWER_ON; + break; + case MMC_POWER_OFF: + cb710_mmc_powerdown(slot); + reader->last_power_mode = MMC_POWER_OFF; + break; + case MMC_POWER_UP: + default: + /* ignore */; + } + + cb710_mmc_enable_4bit_data(slot, ios->bus_width != MMC_BUS_WIDTH_1); + + cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0); +} + +static int cb710_mmc_get_ro(struct mmc_host *mmc) +{ + struct cb710_slot *slot = cb710_mmc_to_slot(mmc); + + return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT) + & CB710_MMC_S3_WRITE_PROTECTED; +} + +static int cb710_mmc_irq_handler(struct cb710_slot *slot) +{ + struct mmc_host *mmc = cb710_slot_to_mmc(slot); + struct cb710_mmc_reader *reader = mmc_priv(mmc); + u32 status, config1, config2, irqen; + + status = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT); + irqen = cb710_read_port_32(slot, CB710_MMC_IRQ_ENABLE_PORT); + config2 = cb710_read_port_32(slot, CB710_MMC_CONFIGB_PORT); + config1 = cb710_read_port_32(slot, CB710_MMC_CONFIG_PORT); + + dev_dbg(cb710_slot_dev(slot), "interrupt; status: %08X, " + "ie: %08X, c2: %08X, c1: %08X\n", + status, irqen, config2, config1); + + if (status & (CB710_MMC_S1_CARD_CHANGED << 8)) { + /* ack the event */ + cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, + CB710_MMC_S1_CARD_CHANGED); + if ((irqen & CB710_MMC_IE_CISTATUS_MASK) + == CB710_MMC_IE_CISTATUS_MASK) + mmc_detect_change(mmc, HZ/5); + } else { + dev_dbg(cb710_slot_dev(slot), "unknown interrupt (test)\n"); + spin_lock(&reader->irq_lock); + __cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_TEST_MASK); + spin_unlock(&reader->irq_lock); + } + + return 1; +} + +static void cb710_mmc_finish_request_tasklet(unsigned long data) +{ + struct mmc_host *mmc = (void *)data; + struct cb710_mmc_reader *reader = mmc_priv(mmc); + struct mmc_request *mrq = reader->mrq; + + reader->mrq = NULL; + mmc_request_done(mmc, mrq); +} + +static const struct mmc_host_ops cb710_mmc_host = { + .request = cb710_mmc_request, + .set_ios = cb710_mmc_set_ios, + .get_ro = cb710_mmc_get_ro +}; + +#ifdef CONFIG_PM + +static int cb710_mmc_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct cb710_slot *slot = cb710_pdev_to_slot(pdev); + struct mmc_host *mmc = cb710_slot_to_mmc(slot); + int err; + + err = mmc_suspend_host(mmc, state); + if (err) + return err; + + cb710_mmc_enable_irq(slot, 0, ~0); + return 0; +} + +static int cb710_mmc_resume(struct platform_device *pdev) +{ + struct cb710_slot *slot = cb710_pdev_to_slot(pdev); + struct mmc_host *mmc = cb710_slot_to_mmc(slot); + + cb710_mmc_enable_irq(slot, 0, ~0); + + return mmc_resume_host(mmc); +} + +#endif /* CONFIG_PM */ + +static int __devinit cb710_mmc_init(struct platform_device *pdev) +{ + struct cb710_slot *slot = cb710_pdev_to_slot(pdev); + struct cb710_chip *chip = cb710_slot_to_chip(slot); + struct mmc_host *mmc; + struct cb710_mmc_reader *reader; + int err; + u32 val; + + mmc = mmc_alloc_host(sizeof(*reader), cb710_slot_dev(slot)); + if (!mmc) + return -ENOMEM; + + dev_set_drvdata(&pdev->dev, mmc); + + /* harmless (maybe) magic */ + pci_read_config_dword(chip->pdev, 0x48, &val); + val = cb710_src_freq_mhz[(val >> 16) & 0xF]; + dev_dbg(cb710_slot_dev(slot), "source frequency: %dMHz\n", val); + val *= 1000000; + + mmc->ops = &cb710_mmc_host; + mmc->f_max = val; + mmc->f_min = val >> cb710_clock_divider_log2[CB710_MAX_DIVIDER_IDX]; + mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34; + mmc->caps = MMC_CAP_4_BIT_DATA; + + reader = mmc_priv(mmc); + + tasklet_init(&reader->finish_req_tasklet, + cb710_mmc_finish_request_tasklet, (unsigned long)mmc); + spin_lock_init(&reader->irq_lock); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + + cb710_mmc_enable_irq(slot, 0, ~0); + cb710_set_irq_handler(slot, cb710_mmc_irq_handler); + + err = mmc_add_host(mmc); + if (unlikely(err)) + goto err_free_mmc; + + dev_dbg(cb710_slot_dev(slot), "mmc_hostname is %s\n", + mmc_hostname(mmc)); + + cb710_mmc_enable_irq(slot, CB710_MMC_IE_CARD_INSERTION_STATUS, 0); + + return 0; + +err_free_mmc: + dev_dbg(cb710_slot_dev(slot), "mmc_add_host() failed: %d\n", err); + + mmc_free_host(mmc); + return err; +} + +static int __devexit cb710_mmc_exit(struct platform_device *pdev) +{ + struct cb710_slot *slot = cb710_pdev_to_slot(pdev); + struct mmc_host *mmc = cb710_slot_to_mmc(slot); + struct cb710_mmc_reader *reader = mmc_priv(mmc); + + cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_CARD_INSERTION_STATUS); + + mmc_remove_host(mmc); + + /* IRQs should be disabled now, but let's stay on the safe side */ + cb710_mmc_enable_irq(slot, 0, ~0); + cb710_set_irq_handler(slot, NULL); + + /* clear config ports - just in case */ + cb710_write_port_32(slot, CB710_MMC_CONFIG_PORT, 0); + cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0); + + tasklet_kill(&reader->finish_req_tasklet); + + mmc_free_host(mmc); + return 0; +} + +static struct platform_driver cb710_mmc_driver = { + .driver.name = "cb710-mmc", + .probe = cb710_mmc_init, + .remove = __devexit_p(cb710_mmc_exit), +#ifdef CONFIG_PM + .suspend = cb710_mmc_suspend, + .resume = cb710_mmc_resume, +#endif +}; + +static int __init cb710_mmc_init_module(void) +{ + return platform_driver_register(&cb710_mmc_driver); +} + +static void __exit cb710_mmc_cleanup_module(void) +{ + platform_driver_unregister(&cb710_mmc_driver); +} + +module_init(cb710_mmc_init_module); +module_exit(cb710_mmc_cleanup_module); + +MODULE_AUTHOR("Michał Mirosław <mirq-linux@rere.qmqm.pl>"); +MODULE_DESCRIPTION("ENE CB710 memory card reader driver - MMC/SD part"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:cb710-mmc"); diff --git a/drivers/mmc/host/cb710-mmc.h b/drivers/mmc/host/cb710-mmc.h new file mode 100644 index 000000000000..e845c776bdd7 --- /dev/null +++ b/drivers/mmc/host/cb710-mmc.h @@ -0,0 +1,104 @@ +/* + * cb710/cb710-mmc.h + * + * Copyright by Michał Mirosław, 2008-2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef LINUX_CB710_MMC_H +#define LINUX_CB710_MMC_H + +#include <linux/cb710.h> + +/* per-MMC-reader structure */ +struct cb710_mmc_reader { + struct tasklet_struct finish_req_tasklet; + struct mmc_request *mrq; + spinlock_t irq_lock; + unsigned char last_power_mode; +}; + +/* some device struct walking */ + +static inline struct mmc_host *cb710_slot_to_mmc(struct cb710_slot *slot) +{ + return dev_get_drvdata(&slot->pdev.dev); +} + +static inline struct cb710_slot *cb710_mmc_to_slot(struct mmc_host *mmc) +{ + struct platform_device *pdev = container_of(mmc_dev(mmc), + struct platform_device, dev); + return cb710_pdev_to_slot(pdev); +} + +/* registers (this might be all wrong ;) */ + +#define CB710_MMC_DATA_PORT 0x00 + +#define CB710_MMC_CONFIG_PORT 0x04 +#define CB710_MMC_CONFIG0_PORT 0x04 +#define CB710_MMC_CONFIG1_PORT 0x05 +#define CB710_MMC_C1_4BIT_DATA_BUS 0x40 +#define CB710_MMC_CONFIG2_PORT 0x06 +#define CB710_MMC_C2_READ_PIO_SIZE_MASK 0x0F /* N-1 */ +#define CB710_MMC_CONFIG3_PORT 0x07 + +#define CB710_MMC_CONFIGB_PORT 0x08 + +#define CB710_MMC_IRQ_ENABLE_PORT 0x0C +#define CB710_MMC_IE_TEST_MASK 0x00BF +#define CB710_MMC_IE_CARD_INSERTION_STATUS 0x1000 +#define CB710_MMC_IE_IRQ_ENABLE 0x8000 +#define CB710_MMC_IE_CISTATUS_MASK \ + (CB710_MMC_IE_CARD_INSERTION_STATUS|CB710_MMC_IE_IRQ_ENABLE) + +#define CB710_MMC_STATUS_PORT 0x10 +#define CB710_MMC_STATUS_ERROR_EVENTS 0x60FF +#define CB710_MMC_STATUS0_PORT 0x10 +#define CB710_MMC_S0_FIFO_UNDERFLOW 0x40 +#define CB710_MMC_STATUS1_PORT 0x11 +#define CB710_MMC_S1_COMMAND_SENT 0x01 +#define CB710_MMC_S1_DATA_TRANSFER_DONE 0x02 +#define CB710_MMC_S1_PIO_TRANSFER_DONE 0x04 +#define CB710_MMC_S1_CARD_CHANGED 0x10 +#define CB710_MMC_S1_RESET 0x20 +#define CB710_MMC_STATUS2_PORT 0x12 +#define CB710_MMC_S2_FIFO_READY 0x01 +#define CB710_MMC_S2_FIFO_EMPTY 0x02 +#define CB710_MMC_S2_BUSY_10 0x10 +#define CB710_MMC_S2_BUSY_20 0x20 +#define CB710_MMC_STATUS3_PORT 0x13 +#define CB710_MMC_S3_CARD_DETECTED 0x02 +#define CB710_MMC_S3_WRITE_PROTECTED 0x04 + +#define CB710_MMC_CMD_TYPE_PORT 0x14 +#define CB710_MMC_RSP_TYPE_MASK 0x0007 +#define CB710_MMC_RSP_R1 (0) +#define CB710_MMC_RSP_136 (5) +#define CB710_MMC_RSP_NO_CRC (2) +#define CB710_MMC_RSP_PRESENT_MASK 0x0018 +#define CB710_MMC_RSP_NONE (0 << 3) +#define CB710_MMC_RSP_PRESENT (1 << 3) +#define CB710_MMC_RSP_PRESENT_X (2 << 3) +#define CB710_MMC_CMD_TYPE_MASK 0x0060 +#define CB710_MMC_CMD_BC (0 << 5) +#define CB710_MMC_CMD_BCR (1 << 5) +#define CB710_MMC_CMD_AC (2 << 5) +#define CB710_MMC_CMD_ADTC (3 << 5) +#define CB710_MMC_DATA_READ 0x0080 +#define CB710_MMC_CMD_CODE_MASK 0x3F00 +#define CB710_MMC_CMD_CODE_SHIFT 8 +#define CB710_MMC_IS_APP_CMD 0x4000 +#define CB710_MMC_RSP_BUSY 0x8000 + +#define CB710_MMC_CMD_PARAM_PORT 0x18 +#define CB710_MMC_TRANSFER_SIZE_PORT 0x1C +#define CB710_MMC_RESPONSE0_PORT 0x20 +#define CB710_MMC_RESPONSE1_PORT 0x24 +#define CB710_MMC_RESPONSE2_PORT 0x28 +#define CB710_MMC_RESPONSE3_PORT 0x2C + +#endif /* LINUX_CB710_MMC_H */ diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c index e0be21a4a696..bf98d7cc928a 100644 --- a/drivers/mmc/host/imxmmc.c +++ b/drivers/mmc/host/imxmmc.c @@ -652,7 +652,7 @@ static irqreturn_t imxmci_irq(int irq, void *devid) set_bit(IMXMCI_PEND_STARTED_b, &host->pending_events); tasklet_schedule(&host->tasklet); - return IRQ_RETVAL(handled);; + return IRQ_RETVAL(handled); } static void imxmci_tasklet_fnc(unsigned long data) diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index f48349d18c92..a461017ce5ce 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -97,6 +97,14 @@ */ #define r1b_timeout (HZ * 3) +/* One of the critical speed parameters is the amount of data which may + * be transfered in one command. If this value is too low, the SD card + * controller has to do multiple partial block writes (argggh!). With + * today (2008) SD cards there is little speed gain if we transfer more + * than 64 KBytes at a time. So use this value until there is any indication + * that we should do more here. + */ +#define MMC_SPI_BLOCKSATONCE 128 /****************************************************************************/ @@ -327,15 +335,16 @@ checkstatus: /* Status byte: the entire seven-bit R1 response. */ if (cmd->resp[0] != 0) { - if ((R1_SPI_PARAMETER | R1_SPI_ADDRESS - | R1_SPI_ILLEGAL_COMMAND) + if ((R1_SPI_PARAMETER | R1_SPI_ADDRESS) & cmd->resp[0]) - value = -EINVAL; + value = -EFAULT; /* Bad address */ + else if (R1_SPI_ILLEGAL_COMMAND & cmd->resp[0]) + value = -ENOSYS; /* Function not implemented */ else if (R1_SPI_COM_CRC & cmd->resp[0]) - value = -EILSEQ; + value = -EILSEQ; /* Illegal byte sequence */ else if ((R1_SPI_ERASE_SEQ | R1_SPI_ERASE_RESET) & cmd->resp[0]) - value = -EIO; + value = -EIO; /* I/O error */ /* else R1_SPI_IDLE, "it's resetting" */ } @@ -1304,6 +1313,12 @@ static int mmc_spi_probe(struct spi_device *spi) struct mmc_spi_host *host; int status; + /* We rely on full duplex transfers, mostly to reduce + * per-transfer overheads (by making fewer transfers). + */ + if (spi->master->flags & SPI_MASTER_HALF_DUPLEX) + return -EINVAL; + /* MMC and SD specs only seem to care that sampling is on the * rising edge ... meaning SPI modes 0 or 3. So either SPI mode * should be legit. We'll use mode 0 since the steady state is 0, @@ -1366,6 +1381,10 @@ static int mmc_spi_probe(struct spi_device *spi) mmc->ops = &mmc_spi_ops; mmc->max_blk_size = MMC_SPI_BLOCKSIZE; + mmc->max_hw_segs = MMC_SPI_BLOCKSATONCE; + mmc->max_phys_segs = MMC_SPI_BLOCKSATONCE; + mmc->max_req_size = MMC_SPI_BLOCKSATONCE * MMC_SPI_BLOCKSIZE; + mmc->max_blk_count = MMC_SPI_BLOCKSATONCE; mmc->caps = MMC_CAP_SPI; diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 7d4febdab286..e1aa8471ab1c 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -546,7 +546,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) host->mclk = clk_get_rate(host->clk); DBG(host, "eventual mclk rate: %u Hz\n", host->mclk); } - host->base = ioremap(dev->res.start, SZ_4K); + host->base = ioremap(dev->res.start, resource_size(&dev->res)); if (!host->base) { ret = -ENOMEM; goto clk_disable; diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index b56d72ff06e9..34e23489811a 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -384,7 +384,7 @@ static irqreturn_t mvsd_irq(int irq, void *dev) u16 val[2] = {0, 0}; val[0] = mvsd_read(MVSD_FIFO); val[1] = mvsd_read(MVSD_FIFO); - memcpy(p, &val, s); + memcpy(p, ((void *)&val) + 4 - s, s); s = 0; intr_status = mvsd_read(MVSD_NOR_INTR_STATUS); } @@ -423,7 +423,7 @@ static irqreturn_t mvsd_irq(int irq, void *dev) if (s < 4) { if (s && (intr_status & MVSD_NOR_TX_AVAIL)) { u16 val[2] = {0, 0}; - memcpy(&val, p, s); + memcpy(((void *)&val) + 4 - s, p, s); mvsd_write(MVSD_FIFO, val[0]); mvsd_write(MVSD_FIFO, val[1]); s = 0; diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index f4cbe473670e..bc14bb1b0579 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -746,8 +746,6 @@ static int mxcmci_probe(struct platform_device *pdev) } mmc->f_min = clk_get_rate(host->clk) >> 16; - if (mmc->f_min < 400000) - mmc->f_min = 400000; mmc->f_max = clk_get_rate(host->clk) >> 1; /* recommended in data sheet */ diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index dceb5ee3bda0..e7a331de5733 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1593,7 +1593,6 @@ static int mmc_omap_resume(struct platform_device *pdev) #endif static struct platform_driver mmc_omap_driver = { - .probe = mmc_omap_probe, .remove = mmc_omap_remove, .suspend = mmc_omap_suspend, .resume = mmc_omap_resume, @@ -1605,7 +1604,7 @@ static struct platform_driver mmc_omap_driver = { static int __init mmc_omap_init(void) { - return platform_driver_register(&mmc_omap_driver); + return platform_driver_probe(&mmc_omap_driver, mmc_omap_probe); } static void __exit mmc_omap_exit(void) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index c40cb96255a2..1cf9cfb3b64f 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1073,7 +1073,6 @@ static int __init omap_mmc_probe(struct platform_device *pdev) mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; mmc->max_seg_size = mmc->max_req_size; - mmc->ocr_avail = mmc_slot(host).ocr_mask; mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED; if (pdata->slots[host->slot_id].wires >= 8) @@ -1110,13 +1109,14 @@ static int __init omap_mmc_probe(struct platform_device *pdev) goto err_irq; } + /* initialize power supplies, gpios, etc */ if (pdata->init != NULL) { if (pdata->init(&pdev->dev) != 0) { - dev_dbg(mmc_dev(host->mmc), - "Unable to configure MMC IRQs\n"); + dev_dbg(mmc_dev(host->mmc), "late init error\n"); goto err_irq_cd_init; } } + mmc->ocr_avail = mmc_slot(host).ocr_mask; /* Request IRQ for card detect */ if ((mmc_slot(host).card_detect_irq)) { diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 430095725f9f..e55ac792d68c 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -27,6 +27,7 @@ #include <linux/err.h> #include <linux/mmc/host.h> #include <linux/io.h> +#include <linux/regulator/consumer.h> #include <asm/sizes.h> @@ -67,8 +68,42 @@ struct pxamci_host { unsigned int dma_dir; unsigned int dma_drcmrrx; unsigned int dma_drcmrtx; + + struct regulator *vcc; }; +static inline void pxamci_init_ocr(struct pxamci_host *host) +{ +#ifdef CONFIG_REGULATOR + host->vcc = regulator_get(mmc_dev(host->mmc), "vmmc"); + + if (IS_ERR(host->vcc)) + host->vcc = NULL; + else { + host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc); + if (host->pdata && host->pdata->ocr_mask) + dev_warn(mmc_dev(host->mmc), + "ocr_mask/setpower will not be used\n"); + } +#endif + if (host->vcc == NULL) { + /* fall-back to platform data */ + host->mmc->ocr_avail = host->pdata ? + host->pdata->ocr_mask : + MMC_VDD_32_33 | MMC_VDD_33_34; + } +} + +static inline void pxamci_set_power(struct pxamci_host *host, unsigned int vdd) +{ +#ifdef CONFIG_REGULATOR + if (host->vcc) + mmc_regulator_set_ocr(host->vcc, vdd); +#endif + if (!host->vcc && host->pdata && host->pdata->setpower) + host->pdata->setpower(mmc_dev(host->mmc), vdd); +} + static void pxamci_stop_clock(struct pxamci_host *host) { if (readl(host->base + MMC_STAT) & STAT_CLK_EN) { @@ -133,12 +168,12 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data) if (data->flags & MMC_DATA_READ) { host->dma_dir = DMA_FROM_DEVICE; - dcmd = DCMD_INCTRGADDR | DCMD_FLOWTRG; + dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC; DRCMR(host->dma_drcmrtx) = 0; DRCMR(host->dma_drcmrrx) = host->dma | DRCMR_MAPVLD; } else { host->dma_dir = DMA_TO_DEVICE; - dcmd = DCMD_INCSRCADDR | DCMD_FLOWSRC; + dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG; DRCMR(host->dma_drcmrrx) = 0; DRCMR(host->dma_drcmrtx) = host->dma | DRCMR_MAPVLD; } @@ -438,8 +473,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (host->power_mode != ios->power_mode) { host->power_mode = ios->power_mode; - if (host->pdata && host->pdata->setpower) - host->pdata->setpower(mmc_dev(mmc), ios->vdd); + pxamci_set_power(host, ios->vdd); if (ios->power_mode == MMC_POWER_ON) host->cmdat |= CMDAT_INIT; @@ -562,9 +596,8 @@ static int pxamci_probe(struct platform_device *pdev) mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000 : host->clkrate; - mmc->ocr_avail = host->pdata ? - host->pdata->ocr_mask : - MMC_VDD_32_33|MMC_VDD_33_34; + pxamci_init_ocr(host); + mmc->caps = 0; host->cmdat = 0; if (!cpu_is_pxa25x()) { @@ -661,6 +694,9 @@ static int pxamci_remove(struct platform_device *pdev) if (mmc) { struct pxamci_host *host = mmc_priv(mmc); + if (host->vcc) + regulator_put(host->vcc); + if (host->pdata && host->pdata->exit) host->pdata->exit(&pdev->dev, mmc); diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 2db166b7096f..8c08cd7efa7f 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -17,6 +17,7 @@ #include <linux/mmc/host.h> #include <linux/platform_device.h> #include <linux/cpufreq.h> +#include <linux/gpio.h> #include <linux/irq.h> #include <linux/io.h> @@ -789,11 +790,11 @@ static void s3cmci_dma_setup(struct s3cmci_host *host, last_source = source; - s3c2410_dma_devconfig(host->dma, source, 3, + s3c2410_dma_devconfig(host->dma, source, host->mem->start + host->sdidata); if (!setup_ok) { - s3c2410_dma_config(host->dma, 4, 0); + s3c2410_dma_config(host->dma, 4); s3c2410_dma_set_buffdone_fn(host->dma, s3cmci_dma_done_callback); s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART); @@ -1121,7 +1122,7 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) case MMC_POWER_OFF: default: s3c2410_gpio_setpin(S3C2410_GPE5, 0); - s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_OUTP); + s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPIO_OUTPUT); if (host->is2440) mci_con |= S3C2440_SDICON_SDRESET; diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of.c index 128c614d11aa..1e8aa590bb39 100644 --- a/drivers/mmc/host/sdhci-of.c +++ b/drivers/mmc/host/sdhci-of.c @@ -158,6 +158,13 @@ static unsigned int esdhc_get_max_clock(struct sdhci_host *host) return of_host->clock; } +static unsigned int esdhc_get_min_clock(struct sdhci_host *host) +{ + struct sdhci_of_host *of_host = sdhci_priv(host); + + return of_host->clock / 256 / 16; +} + static unsigned int esdhc_get_timeout_clock(struct sdhci_host *host) { struct sdhci_of_host *of_host = sdhci_priv(host); @@ -184,6 +191,7 @@ static struct sdhci_of_data sdhci_esdhc = { .set_clock = esdhc_set_clock, .enable_dma = esdhc_enable_dma, .get_max_clock = esdhc_get_max_clock, + .get_min_clock = esdhc_get_min_clock, .get_timeout_clock = esdhc_get_timeout_clock, }, }; @@ -226,7 +234,7 @@ static int __devinit sdhci_of_probe(struct of_device *ofdev, return -ENODEV; host = sdhci_alloc_host(&ofdev->dev, sizeof(*of_host)); - if (!host) + if (IS_ERR(host)) return -ENOMEM; of_host = sdhci_priv(host); @@ -250,6 +258,9 @@ static int __devinit sdhci_of_probe(struct of_device *ofdev, host->ops = &sdhci_of_data->ops; } + if (of_get_property(np, "sdhci,1-bit-only", NULL)) + host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA; + clk = of_get_property(np, "clock-frequency", &size); if (clk && size == sizeof(*clk) && *clk) of_host->clock = *clk; diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 65be27995d5c..2f15cc17d887 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -284,6 +284,18 @@ static const struct sdhci_pci_fixes sdhci_jmicron = { .resume = jmicron_resume, }; +static int via_probe(struct sdhci_pci_chip *chip) +{ + if (chip->pdev->revision == 0x10) + chip->quirks |= SDHCI_QUIRK_DELAY_AFTER_POWER; + + return 0; +} + +static const struct sdhci_pci_fixes sdhci_via = { + .probe = via_probe, +}; + static const struct pci_device_id pci_ids[] __devinitdata = { { .vendor = PCI_VENDOR_ID_RICOH, @@ -349,6 +361,14 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .driver_data = (kernel_ulong_t)&sdhci_jmicron, }, + { + .vendor = PCI_VENDOR_ID_VIA, + .device = 0x95d0, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_via, + }, + { /* Generic SD host controller */ PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00) }, diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c new file mode 100644 index 000000000000..297f40ae6ad5 --- /dev/null +++ b/drivers/mmc/host/sdhci-pltfm.c @@ -0,0 +1,168 @@ +/* + * sdhci-pltfm.c Support for SDHCI platform devices + * Copyright (c) 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Supports: + * SDHCI platform devices + * + * Inspired by sdhci-pci.c, by Pierre Ossman + */ + +#include <linux/delay.h> +#include <linux/highmem.h> +#include <linux/platform_device.h> + +#include <linux/mmc/host.h> + +#include <linux/io.h> + +#include "sdhci.h" + +/*****************************************************************************\ + * * + * SDHCI core callbacks * + * * +\*****************************************************************************/ + +static struct sdhci_ops sdhci_pltfm_ops = { +}; + +/*****************************************************************************\ + * * + * Device probing/removal * + * * +\*****************************************************************************/ + +static int __devinit sdhci_pltfm_probe(struct platform_device *pdev) +{ + struct sdhci_host *host; + struct resource *iomem; + int ret; + + BUG_ON(pdev == NULL); + + iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!iomem) { + ret = -ENOMEM; + goto err; + } + + if (resource_size(iomem) != 0x100) + dev_err(&pdev->dev, "Invalid iomem size. You may " + "experience problems.\n"); + + if (pdev->dev.parent) + host = sdhci_alloc_host(pdev->dev.parent, 0); + else + host = sdhci_alloc_host(&pdev->dev, 0); + + if (IS_ERR(host)) { + ret = PTR_ERR(host); + goto err; + } + + host->hw_name = "platform"; + host->ops = &sdhci_pltfm_ops; + host->irq = platform_get_irq(pdev, 0); + + if (!request_mem_region(iomem->start, resource_size(iomem), + mmc_hostname(host->mmc))) { + dev_err(&pdev->dev, "cannot request region\n"); + ret = -EBUSY; + goto err_request; + } + + host->ioaddr = ioremap(iomem->start, resource_size(iomem)); + if (!host->ioaddr) { + dev_err(&pdev->dev, "failed to remap registers\n"); + ret = -ENOMEM; + goto err_remap; + } + + ret = sdhci_add_host(host); + if (ret) + goto err_add_host; + + platform_set_drvdata(pdev, host); + + return 0; + +err_add_host: + iounmap(host->ioaddr); +err_remap: + release_mem_region(iomem->start, resource_size(iomem)); +err_request: + sdhci_free_host(host); +err: + printk(KERN_ERR"Probing of sdhci-pltfm failed: %d\n", ret); + return ret; +} + +static int __devexit sdhci_pltfm_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + int dead; + u32 scratch; + + dead = 0; + scratch = readl(host->ioaddr + SDHCI_INT_STATUS); + if (scratch == (u32)-1) + dead = 1; + + sdhci_remove_host(host, dead); + iounmap(host->ioaddr); + release_mem_region(iomem->start, resource_size(iomem)); + sdhci_free_host(host); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver sdhci_pltfm_driver = { + .driver = { + .name = "sdhci", + .owner = THIS_MODULE, + }, + .probe = sdhci_pltfm_probe, + .remove = __devexit_p(sdhci_pltfm_remove), +}; + +/*****************************************************************************\ + * * + * Driver init/exit * + * * +\*****************************************************************************/ + +static int __init sdhci_drv_init(void) +{ + return platform_driver_register(&sdhci_pltfm_driver); +} + +static void __exit sdhci_drv_exit(void) +{ + platform_driver_unregister(&sdhci_pltfm_driver); +} + +module_init(sdhci_drv_init); +module_exit(sdhci_drv_exit); + +MODULE_DESCRIPTION("Secure Digital Host Controller Interface platform driver"); +MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:sdhci"); + diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c new file mode 100644 index 000000000000..50997d2a63e7 --- /dev/null +++ b/drivers/mmc/host/sdhci-s3c.c @@ -0,0 +1,428 @@ +/* linux/drivers/mmc/host/sdhci-s3c.c + * + * Copyright 2008 Openmoko Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * SDHCI (HSMMC) support for Samsung SoC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <linux/mmc/host.h> + +#include <plat/sdhci.h> +#include <plat/regs-sdhci.h> + +#include "sdhci.h" + +#define MAX_BUS_CLK (4) + +/** + * struct sdhci_s3c - S3C SDHCI instance + * @host: The SDHCI host created + * @pdev: The platform device we where created from. + * @ioarea: The resource created when we claimed the IO area. + * @pdata: The platform data for this controller. + * @cur_clk: The index of the current bus clock. + * @clk_io: The clock for the internal bus interface. + * @clk_bus: The clocks that are available for the SD/MMC bus clock. + */ +struct sdhci_s3c { + struct sdhci_host *host; + struct platform_device *pdev; + struct resource *ioarea; + struct s3c_sdhci_platdata *pdata; + unsigned int cur_clk; + + struct clk *clk_io; + struct clk *clk_bus[MAX_BUS_CLK]; +}; + +static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host) +{ + return sdhci_priv(host); +} + +/** + * get_curclk - convert ctrl2 register to clock source number + * @ctrl2: Control2 register value. + */ +static u32 get_curclk(u32 ctrl2) +{ + ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; + ctrl2 >>= S3C_SDHCI_CTRL2_SELBASECLK_SHIFT; + + return ctrl2; +} + +static void sdhci_s3c_check_sclk(struct sdhci_host *host) +{ + struct sdhci_s3c *ourhost = to_s3c(host); + u32 tmp = readl(host->ioaddr + S3C_SDHCI_CONTROL2); + + if (get_curclk(tmp) != ourhost->cur_clk) { + dev_dbg(&ourhost->pdev->dev, "restored ctrl2 clock setting\n"); + + tmp &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK; + tmp |= ourhost->cur_clk << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT; + writel(tmp, host->ioaddr + 0x80); + } +} + +/** + * sdhci_s3c_get_max_clk - callback to get maximum clock frequency. + * @host: The SDHCI host instance. + * + * Callback to return the maximum clock rate acheivable by the controller. +*/ +static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host) +{ + struct sdhci_s3c *ourhost = to_s3c(host); + struct clk *busclk; + unsigned int rate, max; + int clk; + + /* note, a reset will reset the clock source */ + + sdhci_s3c_check_sclk(host); + + for (max = 0, clk = 0; clk < MAX_BUS_CLK; clk++) { + busclk = ourhost->clk_bus[clk]; + if (!busclk) + continue; + + rate = clk_get_rate(busclk); + if (rate > max) + max = rate; + } + + return max; +} + +static unsigned int sdhci_s3c_get_timeout_clk(struct sdhci_host *host) +{ + return sdhci_s3c_get_max_clk(host) / 1000000; +} + +/** + * sdhci_s3c_consider_clock - consider one the bus clocks for current setting + * @ourhost: Our SDHCI instance. + * @src: The source clock index. + * @wanted: The clock frequency wanted. + */ +static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost, + unsigned int src, + unsigned int wanted) +{ + unsigned long rate; + struct clk *clksrc = ourhost->clk_bus[src]; + int div; + + if (!clksrc) + return UINT_MAX; + + rate = clk_get_rate(clksrc); + + for (div = 1; div < 256; div *= 2) { + if ((rate / div) <= wanted) + break; + } + + dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n", + src, rate, wanted, rate / div); + + return (wanted - (rate / div)); +} + +/** + * sdhci_s3c_set_clock - callback on clock change + * @host: The SDHCI host being changed + * @clock: The clock rate being requested. + * + * When the card's clock is going to be changed, look at the new frequency + * and find the best clock source to go with it. +*/ +static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock) +{ + struct sdhci_s3c *ourhost = to_s3c(host); + unsigned int best = UINT_MAX; + unsigned int delta; + int best_src = 0; + int src; + u32 ctrl; + + /* don't bother if the clock is going off. */ + if (clock == 0) + return; + + for (src = 0; src < MAX_BUS_CLK; src++) { + delta = sdhci_s3c_consider_clock(ourhost, src, clock); + if (delta < best) { + best = delta; + best_src = src; + } + } + + dev_dbg(&ourhost->pdev->dev, + "selected source %d, clock %d, delta %d\n", + best_src, clock, best); + + /* select the new clock source */ + + if (ourhost->cur_clk != best_src) { + struct clk *clk = ourhost->clk_bus[best_src]; + + /* turn clock off to card before changing clock source */ + writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL); + + ourhost->cur_clk = best_src; + host->max_clk = clk_get_rate(clk); + host->timeout_clk = sdhci_s3c_get_timeout_clk(host); + + ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2); + ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK; + ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT; + writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2); + } + + /* reconfigure the hardware for new clock rate */ + + { + struct mmc_ios ios; + + ios.clock = clock; + + if (ourhost->pdata->cfg_card) + (ourhost->pdata->cfg_card)(ourhost->pdev, host->ioaddr, + &ios, NULL); + } +} + +static struct sdhci_ops sdhci_s3c_ops = { + .get_max_clock = sdhci_s3c_get_max_clk, + .get_timeout_clock = sdhci_s3c_get_timeout_clk, + .set_clock = sdhci_s3c_set_clock, +}; + +static int __devinit sdhci_s3c_probe(struct platform_device *pdev) +{ + struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct sdhci_host *host; + struct sdhci_s3c *sc; + struct resource *res; + int ret, irq, ptr, clks; + + if (!pdata) { + dev_err(dev, "no device data specified\n"); + return -ENOENT; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "no irq specified\n"); + return irq; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "no memory specified\n"); + return -ENOENT; + } + + host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c)); + if (IS_ERR(host)) { + dev_err(dev, "sdhci_alloc_host() failed\n"); + return PTR_ERR(host); + } + + sc = sdhci_priv(host); + + sc->host = host; + sc->pdev = pdev; + sc->pdata = pdata; + + platform_set_drvdata(pdev, host); + + sc->clk_io = clk_get(dev, "hsmmc"); + if (IS_ERR(sc->clk_io)) { + dev_err(dev, "failed to get io clock\n"); + ret = PTR_ERR(sc->clk_io); + goto err_io_clk; + } + + /* enable the local io clock and keep it running for the moment. */ + clk_enable(sc->clk_io); + + for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) { + struct clk *clk; + char *name = pdata->clocks[ptr]; + + if (name == NULL) + continue; + + clk = clk_get(dev, name); + if (IS_ERR(clk)) { + dev_err(dev, "failed to get clock %s\n", name); + continue; + } + + clks++; + sc->clk_bus[ptr] = clk; + clk_enable(clk); + + dev_info(dev, "clock source %d: %s (%ld Hz)\n", + ptr, name, clk_get_rate(clk)); + } + + if (clks == 0) { + dev_err(dev, "failed to find any bus clocks\n"); + ret = -ENOENT; + goto err_no_busclks; + } + + sc->ioarea = request_mem_region(res->start, resource_size(res), + mmc_hostname(host->mmc)); + if (!sc->ioarea) { + dev_err(dev, "failed to reserve register area\n"); + ret = -ENXIO; + goto err_req_regs; + } + + host->ioaddr = ioremap_nocache(res->start, resource_size(res)); + if (!host->ioaddr) { + dev_err(dev, "failed to map registers\n"); + ret = -ENXIO; + goto err_req_regs; + } + + /* Ensure we have minimal gpio selected CMD/CLK/Detect */ + if (pdata->cfg_gpio) + pdata->cfg_gpio(pdev, pdata->max_width); + + host->hw_name = "samsung-hsmmc"; + host->ops = &sdhci_s3c_ops; + host->quirks = 0; + host->irq = irq; + + /* Setup quirks for the controller */ + + /* Currently with ADMA enabled we are getting some length + * interrupts that are not being dealt with, do disable + * ADMA until this is sorted out. */ + host->quirks |= SDHCI_QUIRK_BROKEN_ADMA; + host->quirks |= SDHCI_QUIRK_32BIT_ADMA_SIZE; + +#ifndef CONFIG_MMC_SDHCI_S3C_DMA + + /* we currently see overruns on errors, so disable the SDMA + * support as well. */ + host->quirks |= SDHCI_QUIRK_BROKEN_DMA; + + /* PIO currently has problems with multi-block IO */ + host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK; + +#endif /* CONFIG_MMC_SDHCI_S3C_DMA */ + + /* It seems we do not get an DATA transfer complete on non-busy + * transfers, not sure if this is a problem with this specific + * SDHCI block, or a missing configuration that needs to be set. */ + host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ; + + host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR | + SDHCI_QUIRK_32BIT_DMA_SIZE); + + ret = sdhci_add_host(host); + if (ret) { + dev_err(dev, "sdhci_add_host() failed\n"); + goto err_add_host; + } + + return 0; + + err_add_host: + release_resource(sc->ioarea); + kfree(sc->ioarea); + + err_req_regs: + for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) { + clk_disable(sc->clk_bus[ptr]); + clk_put(sc->clk_bus[ptr]); + } + + err_no_busclks: + clk_disable(sc->clk_io); + clk_put(sc->clk_io); + + err_io_clk: + sdhci_free_host(host); + + return ret; +} + +static int __devexit sdhci_s3c_remove(struct platform_device *pdev) +{ + return 0; +} + +#ifdef CONFIG_PM + +static int sdhci_s3c_suspend(struct platform_device *dev, pm_message_t pm) +{ + struct sdhci_host *host = platform_get_drvdata(dev); + + sdhci_suspend_host(host, pm); + return 0; +} + +static int sdhci_s3c_resume(struct platform_device *dev) +{ + struct sdhci_host *host = platform_get_drvdata(dev); + + sdhci_resume_host(host); + return 0; +} + +#else +#define sdhci_s3c_suspend NULL +#define sdhci_s3c_resume NULL +#endif + +static struct platform_driver sdhci_s3c_driver = { + .probe = sdhci_s3c_probe, + .remove = __devexit_p(sdhci_s3c_remove), + .suspend = sdhci_s3c_suspend, + .resume = sdhci_s3c_resume, + .driver = { + .owner = THIS_MODULE, + .name = "s3c-sdhci", + }, +}; + +static int __init sdhci_s3c_init(void) +{ + return platform_driver_register(&sdhci_s3c_driver); +} + +static void __exit sdhci_s3c_exit(void) +{ + platform_driver_unregister(&sdhci_s3c_driver); +} + +module_init(sdhci_s3c_init); +module_exit(sdhci_s3c_exit); + +MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue"); +MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:s3c-sdhci"); diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 9234be2226e7..fc96f8cb9c0b 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -78,6 +78,11 @@ static void sdhci_dumpregs(struct sdhci_host *host) sdhci_readl(host, SDHCI_CAPABILITIES), sdhci_readl(host, SDHCI_MAX_CURRENT)); + if (host->flags & SDHCI_USE_ADMA) + printk(KERN_DEBUG DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n", + readl(host->ioaddr + SDHCI_ADMA_ERROR), + readl(host->ioaddr + SDHCI_ADMA_ADDRESS)); + printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n"); } @@ -579,7 +584,7 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data) * longer to time out, but that's much better than having a too-short * timeout value. */ - if ((host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL)) + if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL) return 0xE; /* timeout in us */ @@ -768,8 +773,14 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) } if (!(host->flags & SDHCI_REQ_USE_DMA)) { - sg_miter_start(&host->sg_miter, - data->sg, data->sg_len, SG_MITER_ATOMIC); + int flags; + + flags = SG_MITER_ATOMIC; + if (host->data->flags & MMC_DATA_READ) + flags |= SG_MITER_TO_SG; + else + flags |= SG_MITER_FROM_SG; + sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); host->blocks = data->blocks; } @@ -1005,12 +1016,34 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power) { u8 pwr; - if (host->power == power) + if (power == (unsigned short)-1) + pwr = 0; + else { + switch (1 << power) { + case MMC_VDD_165_195: + pwr = SDHCI_POWER_180; + break; + case MMC_VDD_29_30: + case MMC_VDD_30_31: + pwr = SDHCI_POWER_300; + break; + case MMC_VDD_32_33: + case MMC_VDD_33_34: + pwr = SDHCI_POWER_330; + break; + default: + BUG(); + } + } + + if (host->pwr == pwr) return; - if (power == (unsigned short)-1) { + host->pwr = pwr; + + if (pwr == 0) { sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); - goto out; + return; } /* @@ -1020,35 +1053,23 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power) if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE)) sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); - pwr = SDHCI_POWER_ON; - - switch (1 << power) { - case MMC_VDD_165_195: - pwr |= SDHCI_POWER_180; - break; - case MMC_VDD_29_30: - case MMC_VDD_30_31: - pwr |= SDHCI_POWER_300; - break; - case MMC_VDD_32_33: - case MMC_VDD_33_34: - pwr |= SDHCI_POWER_330; - break; - default: - BUG(); - } - /* * At least the Marvell CaFe chip gets confused if we set the voltage * and set turn on power at the same time, so set the voltage first. */ - if ((host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)) - sdhci_writeb(host, pwr & ~SDHCI_POWER_ON, SDHCI_POWER_CONTROL); + if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER) + sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + + pwr |= SDHCI_POWER_ON; sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); -out: - host->power = power; + /* + * Some controllers need an extra 10ms delay of 10ms before they + * can apply clock after applying power + */ + if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER) + mdelay(10); } /*****************************************************************************\ @@ -1374,6 +1395,35 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask) sdhci_finish_command(host); } +#ifdef DEBUG +static void sdhci_show_adma_error(struct sdhci_host *host) +{ + const char *name = mmc_hostname(host->mmc); + u8 *desc = host->adma_desc; + __le32 *dma; + __le16 *len; + u8 attr; + + sdhci_dumpregs(host); + + while (true) { + dma = (__le32 *)(desc + 4); + len = (__le16 *)(desc + 2); + attr = *desc; + + DBG("%s: %p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n", + name, desc, le32_to_cpu(*dma), le16_to_cpu(*len), attr); + + desc += 8; + + if (attr & 2) + break; + } +} +#else +static void sdhci_show_adma_error(struct sdhci_host *host) { } +#endif + static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) { BUG_ON(intmask == 0); @@ -1403,8 +1453,11 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) host->data->error = -ETIMEDOUT; else if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_END_BIT)) host->data->error = -EILSEQ; - else if (intmask & SDHCI_INT_ADMA_ERROR) + else if (intmask & SDHCI_INT_ADMA_ERROR) { + printk(KERN_ERR "%s: ADMA error\n", mmc_hostname(host->mmc)); + sdhci_show_adma_error(host); host->data->error = -EIO; + } if (host->data->error) sdhci_finish_data(host); @@ -1719,9 +1772,15 @@ int sdhci_add_host(struct sdhci_host *host) * Set host parameters. */ mmc->ops = &sdhci_ops; - mmc->f_min = host->max_clk / 256; + if (host->ops->get_min_clock) + mmc->f_min = host->ops->get_min_clock(host); + else + mmc->f_min = host->max_clk / 256; mmc->f_max = host->max_clk; - mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; + mmc->caps = MMC_CAP_SDIO_IRQ; + + if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA)) + mmc->caps |= MMC_CAP_4_BIT_DATA; if (caps & SDHCI_CAN_DO_HISPD) mmc->caps |= MMC_CAP_SD_HIGHSPEED; @@ -1794,7 +1853,7 @@ int sdhci_add_host(struct sdhci_host *host) /* * Maximum block count. */ - mmc->max_blk_count = 65535; + mmc->max_blk_count = (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535; /* * Init tasklets. diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 65c6f996bbd3..c77e9ff30223 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -226,6 +226,12 @@ struct sdhci_host { #define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET (1<<19) /* Controller has to be forced to use block size of 2048 bytes */ #define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20) +/* Controller cannot do multi-block transfers */ +#define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21) +/* Controller can only handle 1-bit data transfers */ +#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22) +/* Controller needs 10ms delay between applying power and clock */ +#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23) int irq; /* Device IRQ */ void __iomem * ioaddr; /* Mapped address */ @@ -255,7 +261,7 @@ struct sdhci_host { unsigned int timeout_clk; /* Timeout freq (KHz) */ unsigned int clock; /* Current clock (MHz) */ - unsigned short power; /* Current voltage */ + u8 pwr; /* Current voltage */ struct mmc_request *mrq; /* Current request */ struct mmc_command *cmd; /* Current command */ @@ -296,6 +302,7 @@ struct sdhci_ops { int (*enable_dma)(struct sdhci_host *host); unsigned int (*get_max_clock)(struct sdhci_host *host); + unsigned int (*get_min_clock)(struct sdhci_host *host); unsigned int (*get_timeout_clock)(struct sdhci_host *host); }; diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c index 63fbd5b7d312..91991b460c45 100644 --- a/drivers/mmc/host/tmio_mmc.c +++ b/drivers/mmc/host/tmio_mmc.c @@ -10,7 +10,7 @@ * * Driver for the MMC / SD / SDIO cell found in: * - * TC6393XB TC6391XB TC6387XB T7L66XB + * TC6393XB TC6391XB TC6387XB T7L66XB ASIC3 * * This driver draws mainly on scattered spec sheets, Reverse engineering * of the toshiba e800 SD driver and some parts of the 2.4 ASIC3 driver (4 bit @@ -35,69 +35,47 @@ #include "tmio_mmc.h" -/* - * Fixme - documentation conflicts on what the clock values are for the - * various dividers. - * One document I have says that its a divisor of a 24MHz clock, another 33. - * This probably depends on HCLK for a given platform, so we may need to - * require HCLK be passed to us from the MFD core. - * - */ - static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock) { - void __iomem *cnf = host->cnf; - void __iomem *ctl = host->ctl; u32 clk = 0, clock; if (new_clock) { - for (clock = 46875, clk = 0x100; new_clock >= (clock<<1); ) { + for (clock = host->mmc->f_min, clk = 0x80000080; + new_clock >= (clock<<1); clk >>= 1) clock <<= 1; - clk >>= 1; - } - if (clk & 0x1) - clk = 0x20000; - - clk >>= 2; - tmio_iowrite8((clk & 0x8000) ? 0 : 1, cnf + CNF_SD_CLK_MODE); clk |= 0x100; } - tmio_iowrite16(clk, ctl + CTL_SD_CARD_CLK_CTL); + sd_config_write8(host, CNF_SD_CLK_MODE, clk >> 22); + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff); } static void tmio_mmc_clk_stop(struct tmio_mmc_host *host) { - void __iomem *ctl = host->ctl; - - tmio_iowrite16(0x0000, ctl + CTL_CLK_AND_WAIT_CTL); + sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000); msleep(10); - tmio_iowrite16(tmio_ioread16(ctl + CTL_SD_CARD_CLK_CTL) & ~0x0100, - ctl + CTL_SD_CARD_CLK_CTL); + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 & + sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); msleep(10); } static void tmio_mmc_clk_start(struct tmio_mmc_host *host) { - void __iomem *ctl = host->ctl; - - tmio_iowrite16(tmio_ioread16(ctl + CTL_SD_CARD_CLK_CTL) | 0x0100, - ctl + CTL_SD_CARD_CLK_CTL); + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 | + sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); msleep(10); - tmio_iowrite16(0x0100, ctl + CTL_CLK_AND_WAIT_CTL); + sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100); msleep(10); } static void reset(struct tmio_mmc_host *host) { - void __iomem *ctl = host->ctl; - /* FIXME - should we set stop clock reg here */ - tmio_iowrite16(0x0000, ctl + CTL_RESET_SD); - tmio_iowrite16(0x0000, ctl + CTL_RESET_SDIO); + sd_ctrl_write16(host, CTL_RESET_SD, 0x0000); + sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000); msleep(10); - tmio_iowrite16(0x0001, ctl + CTL_RESET_SD); - tmio_iowrite16(0x0001, ctl + CTL_RESET_SDIO); + sd_ctrl_write16(host, CTL_RESET_SD, 0x0001); + sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001); msleep(10); } @@ -129,13 +107,12 @@ tmio_mmc_finish_request(struct tmio_mmc_host *host) static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd) { - void __iomem *ctl = host->ctl; struct mmc_data *data = host->data; int c = cmd->opcode; /* Command 12 is handled by hardware */ if (cmd->opcode == 12 && !cmd->arg) { - tmio_iowrite16(0x001, ctl + CTL_STOP_INTERNAL_ACTION); + sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001); return 0; } @@ -160,18 +137,18 @@ tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd) if (data) { c |= DATA_PRESENT; if (data->blocks > 1) { - tmio_iowrite16(0x100, ctl + CTL_STOP_INTERNAL_ACTION); + sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100); c |= TRANSFER_MULTI; } if (data->flags & MMC_DATA_READ) c |= TRANSFER_READ; } - enable_mmc_irqs(ctl, TMIO_MASK_CMD); + enable_mmc_irqs(host, TMIO_MASK_CMD); /* Fire off the command */ - tmio_iowrite32(cmd->arg, ctl + CTL_ARG_REG); - tmio_iowrite16(c, ctl + CTL_SD_CMD); + sd_ctrl_write32(host, CTL_ARG_REG, cmd->arg); + sd_ctrl_write16(host, CTL_SD_CMD, c); return 0; } @@ -183,7 +160,6 @@ tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd) */ static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host) { - void __iomem *ctl = host->ctl; struct mmc_data *data = host->data; unsigned short *buf; unsigned int count; @@ -206,9 +182,9 @@ static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host) /* Transfer the data */ if (data->flags & MMC_DATA_READ) - tmio_ioread16_rep(ctl + CTL_SD_DATA_PORT, buf, count >> 1); + sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1); else - tmio_iowrite16_rep(ctl + CTL_SD_DATA_PORT, buf, count >> 1); + sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1); host->sg_off += count; @@ -222,7 +198,6 @@ static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host) static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host) { - void __iomem *ctl = host->ctl; struct mmc_data *data = host->data; struct mmc_command *stop; @@ -251,13 +226,13 @@ static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host) */ if (data->flags & MMC_DATA_READ) - disable_mmc_irqs(ctl, TMIO_MASK_READOP); + disable_mmc_irqs(host, TMIO_MASK_READOP); else - disable_mmc_irqs(ctl, TMIO_MASK_WRITEOP); + disable_mmc_irqs(host, TMIO_MASK_WRITEOP); if (stop) { if (stop->opcode == 12 && !stop->arg) - tmio_iowrite16(0x000, ctl + CTL_STOP_INTERNAL_ACTION); + sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000); else BUG(); } @@ -268,9 +243,8 @@ static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host) static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, unsigned int stat) { - void __iomem *ctl = host->ctl, *addr; struct mmc_command *cmd = host->cmd; - int i; + int i, addr; if (!host->cmd) { pr_debug("Spurious CMD irq\n"); @@ -284,8 +258,8 @@ static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, * modify the order of the response for short response command types. */ - for (i = 3, addr = ctl + CTL_RESPONSE ; i >= 0 ; i--, addr += 4) - cmd->resp[i] = tmio_ioread32(addr); + for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4) + cmd->resp[i] = sd_ctrl_read32(host, addr); if (cmd->flags & MMC_RSP_136) { cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24); @@ -307,9 +281,9 @@ static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, */ if (host->data && !cmd->error) { if (host->data->flags & MMC_DATA_READ) - enable_mmc_irqs(ctl, TMIO_MASK_READOP); + enable_mmc_irqs(host, TMIO_MASK_READOP); else - enable_mmc_irqs(ctl, TMIO_MASK_WRITEOP); + enable_mmc_irqs(host, TMIO_MASK_WRITEOP); } else { tmio_mmc_finish_request(host); } @@ -321,20 +295,19 @@ static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, static irqreturn_t tmio_mmc_irq(int irq, void *devid) { struct tmio_mmc_host *host = devid; - void __iomem *ctl = host->ctl; unsigned int ireg, irq_mask, status; pr_debug("MMC IRQ begin\n"); - status = tmio_ioread32(ctl + CTL_STATUS); - irq_mask = tmio_ioread32(ctl + CTL_IRQ_MASK); + status = sd_ctrl_read32(host, CTL_STATUS); + irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK); ireg = status & TMIO_MASK_IRQ & ~irq_mask; pr_debug_status(status); pr_debug_status(ireg); if (!ireg) { - disable_mmc_irqs(ctl, status & ~irq_mask); + disable_mmc_irqs(host, status & ~irq_mask); pr_debug("tmio_mmc: Spurious irq, disabling! " "0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg); @@ -346,7 +319,7 @@ static irqreturn_t tmio_mmc_irq(int irq, void *devid) while (ireg) { /* Card insert / remove attempts */ if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) { - ack_mmc_irqs(ctl, TMIO_STAT_CARD_INSERT | + ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE); mmc_detect_change(host->mmc, 0); } @@ -358,25 +331,25 @@ static irqreturn_t tmio_mmc_irq(int irq, void *devid) /* Command completion */ if (ireg & TMIO_MASK_CMD) { - ack_mmc_irqs(ctl, TMIO_MASK_CMD); + ack_mmc_irqs(host, TMIO_MASK_CMD); tmio_mmc_cmd_irq(host, status); } /* Data transfer */ if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) { - ack_mmc_irqs(ctl, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ); + ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ); tmio_mmc_pio_irq(host); } /* Data transfer completion */ if (ireg & TMIO_STAT_DATAEND) { - ack_mmc_irqs(ctl, TMIO_STAT_DATAEND); + ack_mmc_irqs(host, TMIO_STAT_DATAEND); tmio_mmc_data_irq(host); } /* Check status - keep going until we've handled it all */ - status = tmio_ioread32(ctl + CTL_STATUS); - irq_mask = tmio_ioread32(ctl + CTL_IRQ_MASK); + status = sd_ctrl_read32(host, CTL_STATUS); + irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK); ireg = status & TMIO_MASK_IRQ & ~irq_mask; pr_debug("Status at end of loop: %08x\n", status); @@ -391,8 +364,6 @@ out: static int tmio_mmc_start_data(struct tmio_mmc_host *host, struct mmc_data *data) { - void __iomem *ctl = host->ctl; - pr_debug("setup data transfer: blocksize %08x nr_blocks %d\n", data->blksz, data->blocks); @@ -407,8 +378,8 @@ static int tmio_mmc_start_data(struct tmio_mmc_host *host, host->data = data; /* Set transfer length / blocksize */ - tmio_iowrite16(data->blksz, ctl + CTL_SD_XFER_LEN); - tmio_iowrite16(data->blocks, ctl + CTL_XFER_BLK_COUNT); + sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz); + sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks); return 0; } @@ -449,8 +420,6 @@ fail: static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct tmio_mmc_host *host = mmc_priv(mmc); - void __iomem *cnf = host->cnf; - void __iomem *ctl = host->ctl; if (ios->clock) tmio_mmc_set_clock(host, ios->clock); @@ -458,12 +427,12 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) /* Power sequence - OFF -> ON -> UP */ switch (ios->power_mode) { case MMC_POWER_OFF: /* power down SD bus */ - tmio_iowrite8(0x00, cnf + CNF_PWR_CTL_2); + sd_config_write8(host, CNF_PWR_CTL_2, 0x00); tmio_mmc_clk_stop(host); break; case MMC_POWER_ON: /* power up SD bus */ - tmio_iowrite8(0x02, cnf + CNF_PWR_CTL_2); + sd_config_write8(host, CNF_PWR_CTL_2, 0x02); break; case MMC_POWER_UP: /* start bus clock */ tmio_mmc_clk_start(host); @@ -472,10 +441,10 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) switch (ios->bus_width) { case MMC_BUS_WIDTH_1: - tmio_iowrite16(0x80e0, ctl + CTL_SD_MEM_CARD_OPT); + sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0); break; case MMC_BUS_WIDTH_4: - tmio_iowrite16(0x00e0, ctl + CTL_SD_MEM_CARD_OPT); + sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0); break; } @@ -486,9 +455,8 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) static int tmio_mmc_get_ro(struct mmc_host *mmc) { struct tmio_mmc_host *host = mmc_priv(mmc); - void __iomem *ctl = host->ctl; - return (tmio_ioread16(ctl + CTL_STATUS) & TMIO_STAT_WRPROTECT) ? 0 : 1; + return (sd_ctrl_read16(host, CTL_STATUS) & TMIO_STAT_WRPROTECT) ? 0 : 1; } static struct mmc_host_ops tmio_mmc_ops = { @@ -518,13 +486,8 @@ static int tmio_mmc_resume(struct platform_device *dev) struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data; struct mmc_host *mmc = platform_get_drvdata(dev); struct tmio_mmc_host *host = mmc_priv(mmc); - void __iomem *cnf = host->cnf; int ret = 0; - /* Enable the MMC/SD Control registers */ - tmio_iowrite16(SDCREN, cnf + CNF_CMD); - tmio_iowrite32(dev->resource[0].start & 0xfffe, cnf + CNF_CTL_BASE); - /* Tell the MFD core we are ready to be enabled */ if (cell->enable) { ret = cell->enable(dev); @@ -532,6 +495,11 @@ static int tmio_mmc_resume(struct platform_device *dev) goto out; } + /* Enable the MMC/SD Control registers */ + sd_config_write16(host, CNF_CMD, SDCREN); + sd_config_write32(host, CNF_CTL_BASE, + (dev->resource[0].start >> host->bus_shift) & 0xfffe); + mmc_resume_host(mmc); out: @@ -545,20 +513,25 @@ out: static int __devinit tmio_mmc_probe(struct platform_device *dev) { struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data; + struct tmio_mmc_data *pdata; struct resource *res_ctl, *res_cnf; struct tmio_mmc_host *host; struct mmc_host *mmc; - int ret = -ENOMEM; + int ret = -EINVAL; if (dev->num_resources != 3) goto out; res_ctl = platform_get_resource(dev, IORESOURCE_MEM, 0); res_cnf = platform_get_resource(dev, IORESOURCE_MEM, 1); - if (!res_ctl || !res_cnf) { - ret = -EINVAL; + if (!res_ctl || !res_cnf) goto out; - } + + pdata = cell->driver_data; + if (!pdata || !pdata->hclk) + goto out; + + ret = -ENOMEM; mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &dev->dev); if (!mmc) @@ -568,6 +541,9 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev) host->mmc = mmc; platform_set_drvdata(dev, mmc); + /* SD control register space size is 0x200, 0x400 for bus_shift=1 */ + host->bus_shift = resource_size(res_ctl) >> 10; + host->ctl = ioremap(res_ctl->start, resource_size(res_ctl)); if (!host->ctl) goto host_free; @@ -578,15 +554,10 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev) mmc->ops = &tmio_mmc_ops; mmc->caps = MMC_CAP_4_BIT_DATA; - mmc->f_min = 46875; /* 24000000 / 512 */ - mmc->f_max = 24000000; + mmc->f_max = pdata->hclk; + mmc->f_min = mmc->f_max / 512; mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - /* Enable the MMC/SD Control registers */ - tmio_iowrite16(SDCREN, host->cnf + CNF_CMD); - tmio_iowrite32(dev->resource[0].start & 0xfffe, - host->cnf + CNF_CTL_BASE); - /* Tell the MFD core we are ready to be enabled */ if (cell->enable) { ret = cell->enable(dev); @@ -594,14 +565,19 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev) goto unmap_cnf; } + /* Enable the MMC/SD Control registers */ + sd_config_write16(host, CNF_CMD, SDCREN); + sd_config_write32(host, CNF_CTL_BASE, + (dev->resource[0].start >> host->bus_shift) & 0xfffe); + /* Disable SD power during suspend */ - tmio_iowrite8(0x01, host->cnf + CNF_PWR_CTL_3); + sd_config_write8(host, CNF_PWR_CTL_3, 0x01); /* The below is required but why? FIXME */ - tmio_iowrite8(0x1f, host->cnf + CNF_STOP_CLK_CTL); + sd_config_write8(host, CNF_STOP_CLK_CTL, 0x1f); /* Power down SD bus*/ - tmio_iowrite8(0x0, host->cnf + CNF_PWR_CTL_2); + sd_config_write8(host, CNF_PWR_CTL_2, 0x00); tmio_mmc_clk_stop(host); reset(host); @@ -612,22 +588,20 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev) else goto unmap_cnf; - disable_mmc_irqs(host->ctl, TMIO_MASK_ALL); + disable_mmc_irqs(host, TMIO_MASK_ALL); - ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED, "tmio-mmc", - host); + ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED | + IRQF_TRIGGER_FALLING, "tmio-mmc", host); if (ret) goto unmap_cnf; - set_irq_type(host->irq, IRQ_TYPE_EDGE_FALLING); - mmc_add_host(mmc); printk(KERN_INFO "%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc), (unsigned long)host->ctl, host->irq); /* Unmask the IRQs we want to know about */ - enable_mmc_irqs(host->ctl, TMIO_MASK_IRQ); + enable_mmc_irqs(host, TMIO_MASK_IRQ); return 0; diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index 9c831ab2ece6..9fa998594974 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -83,34 +83,36 @@ TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT) #define TMIO_MASK_IRQ (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD) -#define enable_mmc_irqs(ctl, i) \ + +#define enable_mmc_irqs(host, i) \ do { \ u32 mask;\ - mask = tmio_ioread32((ctl) + CTL_IRQ_MASK); \ + mask = sd_ctrl_read32((host), CTL_IRQ_MASK); \ mask &= ~((i) & TMIO_MASK_IRQ); \ - tmio_iowrite32(mask, (ctl) + CTL_IRQ_MASK); \ + sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \ } while (0) -#define disable_mmc_irqs(ctl, i) \ +#define disable_mmc_irqs(host, i) \ do { \ u32 mask;\ - mask = tmio_ioread32((ctl) + CTL_IRQ_MASK); \ + mask = sd_ctrl_read32((host), CTL_IRQ_MASK); \ mask |= ((i) & TMIO_MASK_IRQ); \ - tmio_iowrite32(mask, (ctl) + CTL_IRQ_MASK); \ + sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \ } while (0) -#define ack_mmc_irqs(ctl, i) \ +#define ack_mmc_irqs(host, i) \ do { \ u32 mask;\ - mask = tmio_ioread32((ctl) + CTL_STATUS); \ + mask = sd_ctrl_read32((host), CTL_STATUS); \ mask &= ~((i) & TMIO_MASK_IRQ); \ - tmio_iowrite32(mask, (ctl) + CTL_STATUS); \ + sd_ctrl_write32((host), CTL_STATUS, mask); \ } while (0) struct tmio_mmc_host { void __iomem *cnf; void __iomem *ctl; + unsigned long bus_shift; struct mmc_command *cmd; struct mmc_request *mrq; struct mmc_data *data; @@ -123,6 +125,63 @@ struct tmio_mmc_host { unsigned int sg_off; }; +#include <linux/io.h> + +static inline u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr) +{ + return readw(host->ctl + (addr << host->bus_shift)); +} + +static inline void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr, + u16 *buf, int count) +{ + readsw(host->ctl + (addr << host->bus_shift), buf, count); +} + +static inline u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr) +{ + return readw(host->ctl + (addr << host->bus_shift)) | + readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16; +} + +static inline void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, + u16 val) +{ + writew(val, host->ctl + (addr << host->bus_shift)); +} + +static inline void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr, + u16 *buf, int count) +{ + writesw(host->ctl + (addr << host->bus_shift), buf, count); +} + +static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, + u32 val) +{ + writew(val, host->ctl + (addr << host->bus_shift)); + writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift)); +} + +static inline void sd_config_write8(struct tmio_mmc_host *host, int addr, + u8 val) +{ + writeb(val, host->cnf + (addr << host->bus_shift)); +} + +static inline void sd_config_write16(struct tmio_mmc_host *host, int addr, + u16 val) +{ + writew(val, host->cnf + (addr << host->bus_shift)); +} + +static inline void sd_config_write32(struct tmio_mmc_host *host, int addr, + u32 val) +{ + writew(val, host->cnf + (addr << host->bus_shift)); + writew(val >> 16, host->cnf + ((addr + 2) << host->bus_shift)); +} + #include <linux/scatterlist.h> #include <linux/blkdev.h> diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c new file mode 100644 index 000000000000..632858a94376 --- /dev/null +++ b/drivers/mmc/host/via-sdmmc.c @@ -0,0 +1,1362 @@ +/* + * drivers/mmc/host/via-sdmmc.c - VIA SD/MMC Card Reader driver + * Copyright (c) 2008, VIA Technologies Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/highmem.h> +#include <linux/delay.h> + +#include <linux/mmc/host.h> + +#define DRV_NAME "via_sdmmc" + +#define PCI_DEVICE_ID_VIA_9530 0x9530 + +#define VIA_CRDR_SDC_OFF 0x200 +#define VIA_CRDR_DDMA_OFF 0x400 +#define VIA_CRDR_PCICTRL_OFF 0x600 + +#define VIA_CRDR_MIN_CLOCK 375000 +#define VIA_CRDR_MAX_CLOCK 48000000 + +/* + * PCI registers + */ + +#define VIA_CRDR_PCI_WORK_MODE 0x40 +#define VIA_CRDR_PCI_DBG_MODE 0x41 + +/* + * SDC MMIO Registers + */ + +#define VIA_CRDR_SDCTRL 0x0 +#define VIA_CRDR_SDCTRL_START 0x01 +#define VIA_CRDR_SDCTRL_WRITE 0x04 +#define VIA_CRDR_SDCTRL_SINGLE_WR 0x10 +#define VIA_CRDR_SDCTRL_SINGLE_RD 0x20 +#define VIA_CRDR_SDCTRL_MULTI_WR 0x30 +#define VIA_CRDR_SDCTRL_MULTI_RD 0x40 +#define VIA_CRDR_SDCTRL_STOP 0x70 + +#define VIA_CRDR_SDCTRL_RSP_NONE 0x0 +#define VIA_CRDR_SDCTRL_RSP_R1 0x10000 +#define VIA_CRDR_SDCTRL_RSP_R2 0x20000 +#define VIA_CRDR_SDCTRL_RSP_R3 0x30000 +#define VIA_CRDR_SDCTRL_RSP_R1B 0x90000 + +#define VIA_CRDR_SDCARG 0x4 + +#define VIA_CRDR_SDBUSMODE 0x8 +#define VIA_CRDR_SDMODE_4BIT 0x02 +#define VIA_CRDR_SDMODE_CLK_ON 0x40 + +#define VIA_CRDR_SDBLKLEN 0xc +/* + * Bit 0 -Bit 10 : Block length. So, the maximum block length should be 2048. + * Bit 11 - Bit 13 : Reserved. + * GPIDET : Select GPI pin to detect card, GPI means CR_CD# in top design. + * INTEN : Enable SD host interrupt. + * Bit 16 - Bit 31 : Block count. So, the maximun block count should be 65536. + */ +#define VIA_CRDR_SDBLKLEN_GPIDET 0x2000 +#define VIA_CRDR_SDBLKLEN_INTEN 0x8000 +#define VIA_CRDR_MAX_BLOCK_COUNT 65536 +#define VIA_CRDR_MAX_BLOCK_LENGTH 2048 + +#define VIA_CRDR_SDRESP0 0x10 +#define VIA_CRDR_SDRESP1 0x14 +#define VIA_CRDR_SDRESP2 0x18 +#define VIA_CRDR_SDRESP3 0x1c + +#define VIA_CRDR_SDCURBLKCNT 0x20 + +#define VIA_CRDR_SDINTMASK 0x24 +/* + * MBDIE : Multiple Blocks transfer Done Interrupt Enable + * BDDIE : Block Data transfer Done Interrupt Enable + * CIRIE : Card Insertion or Removal Interrupt Enable + * CRDIE : Command-Response transfer Done Interrupt Enable + * CRTOIE : Command-Response response TimeOut Interrupt Enable + * ASCRDIE : Auto Stop Command-Response transfer Done Interrupt Enable + * DTIE : Data access Timeout Interrupt Enable + * SCIE : reSponse CRC error Interrupt Enable + * RCIE : Read data CRC error Interrupt Enable + * WCIE : Write data CRC error Interrupt Enable + */ +#define VIA_CRDR_SDINTMASK_MBDIE 0x10 +#define VIA_CRDR_SDINTMASK_BDDIE 0x20 +#define VIA_CRDR_SDINTMASK_CIRIE 0x80 +#define VIA_CRDR_SDINTMASK_CRDIE 0x200 +#define VIA_CRDR_SDINTMASK_CRTOIE 0x400 +#define VIA_CRDR_SDINTMASK_ASCRDIE 0x800 +#define VIA_CRDR_SDINTMASK_DTIE 0x1000 +#define VIA_CRDR_SDINTMASK_SCIE 0x2000 +#define VIA_CRDR_SDINTMASK_RCIE 0x4000 +#define VIA_CRDR_SDINTMASK_WCIE 0x8000 + +#define VIA_CRDR_SDACTIVE_INTMASK \ + (VIA_CRDR_SDINTMASK_MBDIE | VIA_CRDR_SDINTMASK_CIRIE \ + | VIA_CRDR_SDINTMASK_CRDIE | VIA_CRDR_SDINTMASK_CRTOIE \ + | VIA_CRDR_SDINTMASK_DTIE | VIA_CRDR_SDINTMASK_SCIE \ + | VIA_CRDR_SDINTMASK_RCIE | VIA_CRDR_SDINTMASK_WCIE) + +#define VIA_CRDR_SDSTATUS 0x28 +/* + * CECC : Reserved + * WP : SD card Write Protect status + * SLOTD : Reserved + * SLOTG : SD SLOT status(Gpi pin status) + * MBD : Multiple Blocks transfer Done interrupt status + * BDD : Block Data transfer Done interrupt status + * CD : Reserved + * CIR : Card Insertion or Removal interrupt detected on GPI pin + * IO : Reserved + * CRD : Command-Response transfer Done interrupt status + * CRTO : Command-Response response TimeOut interrupt status + * ASCRDIE : Auto Stop Command-Response transfer Done interrupt status + * DT : Data access Timeout interrupt status + * SC : reSponse CRC error interrupt status + * RC : Read data CRC error interrupt status + * WC : Write data CRC error interrupt status + */ +#define VIA_CRDR_SDSTS_CECC 0x01 +#define VIA_CRDR_SDSTS_WP 0x02 +#define VIA_CRDR_SDSTS_SLOTD 0x04 +#define VIA_CRDR_SDSTS_SLOTG 0x08 +#define VIA_CRDR_SDSTS_MBD 0x10 +#define VIA_CRDR_SDSTS_BDD 0x20 +#define VIA_CRDR_SDSTS_CD 0x40 +#define VIA_CRDR_SDSTS_CIR 0x80 +#define VIA_CRDR_SDSTS_IO 0x100 +#define VIA_CRDR_SDSTS_CRD 0x200 +#define VIA_CRDR_SDSTS_CRTO 0x400 +#define VIA_CRDR_SDSTS_ASCRDIE 0x800 +#define VIA_CRDR_SDSTS_DT 0x1000 +#define VIA_CRDR_SDSTS_SC 0x2000 +#define VIA_CRDR_SDSTS_RC 0x4000 +#define VIA_CRDR_SDSTS_WC 0x8000 + +#define VIA_CRDR_SDSTS_IGN_MASK\ + (VIA_CRDR_SDSTS_BDD | VIA_CRDR_SDSTS_ASCRDIE | VIA_CRDR_SDSTS_IO) +#define VIA_CRDR_SDSTS_INT_MASK \ + (VIA_CRDR_SDSTS_MBD | VIA_CRDR_SDSTS_BDD | VIA_CRDR_SDSTS_CD \ + | VIA_CRDR_SDSTS_CIR | VIA_CRDR_SDSTS_IO | VIA_CRDR_SDSTS_CRD \ + | VIA_CRDR_SDSTS_CRTO | VIA_CRDR_SDSTS_ASCRDIE | VIA_CRDR_SDSTS_DT \ + | VIA_CRDR_SDSTS_SC | VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC) +#define VIA_CRDR_SDSTS_W1C_MASK \ + (VIA_CRDR_SDSTS_CECC | VIA_CRDR_SDSTS_MBD | VIA_CRDR_SDSTS_BDD \ + | VIA_CRDR_SDSTS_CD | VIA_CRDR_SDSTS_CIR | VIA_CRDR_SDSTS_CRD \ + | VIA_CRDR_SDSTS_CRTO | VIA_CRDR_SDSTS_ASCRDIE | VIA_CRDR_SDSTS_DT \ + | VIA_CRDR_SDSTS_SC | VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC) +#define VIA_CRDR_SDSTS_CMD_MASK \ + (VIA_CRDR_SDSTS_CRD | VIA_CRDR_SDSTS_CRTO | VIA_CRDR_SDSTS_SC) +#define VIA_CRDR_SDSTS_DATA_MASK\ + (VIA_CRDR_SDSTS_MBD | VIA_CRDR_SDSTS_DT \ + | VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC) + +#define VIA_CRDR_SDSTATUS2 0x2a +/* + * CFE : Enable SD host automatic Clock FReezing + */ +#define VIA_CRDR_SDSTS_CFE 0x80 + +#define VIA_CRDR_SDRSPTMO 0x2C + +#define VIA_CRDR_SDCLKSEL 0x30 + +#define VIA_CRDR_SDEXTCTRL 0x34 +#define VIS_CRDR_SDEXTCTRL_AUTOSTOP_SD 0x01 +#define VIS_CRDR_SDEXTCTRL_SHIFT_9 0x02 +#define VIS_CRDR_SDEXTCTRL_MMC_8BIT 0x04 +#define VIS_CRDR_SDEXTCTRL_RELD_BLK 0x08 +#define VIS_CRDR_SDEXTCTRL_BAD_CMDA 0x10 +#define VIS_CRDR_SDEXTCTRL_BAD_DATA 0x20 +#define VIS_CRDR_SDEXTCTRL_AUTOSTOP_SPI 0x40 +#define VIA_CRDR_SDEXTCTRL_HISPD 0x80 +/* 0x38-0xFF reserved */ + +/* + * Data DMA Control Registers + */ + +#define VIA_CRDR_DMABASEADD 0x0 +#define VIA_CRDR_DMACOUNTER 0x4 + +#define VIA_CRDR_DMACTRL 0x8 +/* + * DIR :Transaction Direction + * 0 : From card to memory + * 1 : From memory to card + */ +#define VIA_CRDR_DMACTRL_DIR 0x100 +#define VIA_CRDR_DMACTRL_ENIRQ 0x10000 +#define VIA_CRDR_DMACTRL_SFTRST 0x1000000 + +#define VIA_CRDR_DMASTS 0xc + +#define VIA_CRDR_DMASTART 0x10 +/*0x14-0xFF reserved*/ + +/* + * PCI Control Registers + */ + +/*0x0 - 0x1 reserved*/ +#define VIA_CRDR_PCICLKGATT 0x2 +/* + * SFTRST : + * 0 : Soft reset all the controller and it will be de-asserted automatically + * 1 : Soft reset is de-asserted + */ +#define VIA_CRDR_PCICLKGATT_SFTRST 0x01 +/* + * 3V3 : Pad power select + * 0 : 1.8V + * 1 : 3.3V + * NOTE : No mater what the actual value should be, this bit always + * read as 0. This is a hardware bug. + */ +#define VIA_CRDR_PCICLKGATT_3V3 0x10 +/* + * PAD_PWRON : Pad Power on/off select + * 0 : Power off + * 1 : Power on + * NOTE : No mater what the actual value should be, this bit always + * read as 0. This is a hardware bug. + */ +#define VIA_CRDR_PCICLKGATT_PAD_PWRON 0x20 + +#define VIA_CRDR_PCISDCCLK 0x5 + +#define VIA_CRDR_PCIDMACLK 0x7 +#define VIA_CRDR_PCIDMACLK_SDC 0x2 + +#define VIA_CRDR_PCIINTCTRL 0x8 +#define VIA_CRDR_PCIINTCTRL_SDCIRQEN 0x04 + +#define VIA_CRDR_PCIINTSTATUS 0x9 +#define VIA_CRDR_PCIINTSTATUS_SDC 0x04 + +#define VIA_CRDR_PCITMOCTRL 0xa +#define VIA_CRDR_PCITMOCTRL_NO 0x0 +#define VIA_CRDR_PCITMOCTRL_32US 0x1 +#define VIA_CRDR_PCITMOCTRL_256US 0x2 +#define VIA_CRDR_PCITMOCTRL_1024US 0x3 +#define VIA_CRDR_PCITMOCTRL_256MS 0x4 +#define VIA_CRDR_PCITMOCTRL_512MS 0x5 +#define VIA_CRDR_PCITMOCTRL_1024MS 0x6 + +/*0xB-0xFF reserved*/ + +enum PCI_HOST_CLK_CONTROL { + PCI_CLK_375K = 0x03, + PCI_CLK_8M = 0x04, + PCI_CLK_12M = 0x00, + PCI_CLK_16M = 0x05, + PCI_CLK_24M = 0x01, + PCI_CLK_33M = 0x06, + PCI_CLK_48M = 0x02 +}; + +struct sdhcreg { + u32 sdcontrol_reg; + u32 sdcmdarg_reg; + u32 sdbusmode_reg; + u32 sdblklen_reg; + u32 sdresp_reg[4]; + u32 sdcurblkcnt_reg; + u32 sdintmask_reg; + u32 sdstatus_reg; + u32 sdrsptmo_reg; + u32 sdclksel_reg; + u32 sdextctrl_reg; +}; + +struct pcictrlreg { + u8 reserve[2]; + u8 pciclkgat_reg; + u8 pcinfcclk_reg; + u8 pcimscclk_reg; + u8 pcisdclk_reg; + u8 pcicaclk_reg; + u8 pcidmaclk_reg; + u8 pciintctrl_reg; + u8 pciintstatus_reg; + u8 pcitmoctrl_reg; + u8 Resv; +}; + +struct via_crdr_mmc_host { + struct mmc_host *mmc; + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; + + void __iomem *mmiobase; + void __iomem *sdhc_mmiobase; + void __iomem *ddma_mmiobase; + void __iomem *pcictrl_mmiobase; + + struct pcictrlreg pm_pcictrl_reg; + struct sdhcreg pm_sdhc_reg; + + struct work_struct carddet_work; + struct tasklet_struct finish_tasklet; + + struct timer_list timer; + spinlock_t lock; + u8 power; + int reject; + unsigned int quirks; +}; + +/* some devices need a very long delay for power to stabilize */ +#define VIA_CRDR_QUIRK_300MS_PWRDELAY 0x0001 + +static struct pci_device_id via_ids[] = { + {PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_9530, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,}, + {0,} +}; + +MODULE_DEVICE_TABLE(pci, via_ids); + +static void via_print_sdchc(struct via_crdr_mmc_host *host) +{ + void __iomem *addrbase = host->sdhc_mmiobase; + + pr_debug("SDC MMIO Registers:\n"); + pr_debug("SDCONTROL=%08x, SDCMDARG=%08x, SDBUSMODE=%08x\n", + readl(addrbase + VIA_CRDR_SDCTRL), + readl(addrbase + VIA_CRDR_SDCARG), + readl(addrbase + VIA_CRDR_SDBUSMODE)); + pr_debug("SDBLKLEN=%08x, SDCURBLKCNT=%08x, SDINTMASK=%08x\n", + readl(addrbase + VIA_CRDR_SDBLKLEN), + readl(addrbase + VIA_CRDR_SDCURBLKCNT), + readl(addrbase + VIA_CRDR_SDINTMASK)); + pr_debug("SDSTATUS=%08x, SDCLKSEL=%08x, SDEXTCTRL=%08x\n", + readl(addrbase + VIA_CRDR_SDSTATUS), + readl(addrbase + VIA_CRDR_SDCLKSEL), + readl(addrbase + VIA_CRDR_SDEXTCTRL)); +} + +static void via_print_pcictrl(struct via_crdr_mmc_host *host) +{ + void __iomem *addrbase = host->pcictrl_mmiobase; + + pr_debug("PCI Control Registers:\n"); + pr_debug("PCICLKGATT=%02x, PCISDCCLK=%02x, PCIDMACLK=%02x\n", + readb(addrbase + VIA_CRDR_PCICLKGATT), + readb(addrbase + VIA_CRDR_PCISDCCLK), + readb(addrbase + VIA_CRDR_PCIDMACLK)); + pr_debug("PCIINTCTRL=%02x, PCIINTSTATUS=%02x\n", + readb(addrbase + VIA_CRDR_PCIINTCTRL), + readb(addrbase + VIA_CRDR_PCIINTSTATUS)); +} + +static void via_save_pcictrlreg(struct via_crdr_mmc_host *host) +{ + struct pcictrlreg *pm_pcictrl_reg; + void __iomem *addrbase; + + pm_pcictrl_reg = &(host->pm_pcictrl_reg); + addrbase = host->pcictrl_mmiobase; + + pm_pcictrl_reg->pciclkgat_reg = readb(addrbase + VIA_CRDR_PCICLKGATT); + pm_pcictrl_reg->pciclkgat_reg |= + VIA_CRDR_PCICLKGATT_3V3 | VIA_CRDR_PCICLKGATT_PAD_PWRON; + pm_pcictrl_reg->pcisdclk_reg = readb(addrbase + VIA_CRDR_PCISDCCLK); + pm_pcictrl_reg->pcidmaclk_reg = readb(addrbase + VIA_CRDR_PCIDMACLK); + pm_pcictrl_reg->pciintctrl_reg = readb(addrbase + VIA_CRDR_PCIINTCTRL); + pm_pcictrl_reg->pciintstatus_reg = + readb(addrbase + VIA_CRDR_PCIINTSTATUS); + pm_pcictrl_reg->pcitmoctrl_reg = readb(addrbase + VIA_CRDR_PCITMOCTRL); +} + +static void via_restore_pcictrlreg(struct via_crdr_mmc_host *host) +{ + struct pcictrlreg *pm_pcictrl_reg; + void __iomem *addrbase; + + pm_pcictrl_reg = &(host->pm_pcictrl_reg); + addrbase = host->pcictrl_mmiobase; + + writeb(pm_pcictrl_reg->pciclkgat_reg, addrbase + VIA_CRDR_PCICLKGATT); + writeb(pm_pcictrl_reg->pcisdclk_reg, addrbase + VIA_CRDR_PCISDCCLK); + writeb(pm_pcictrl_reg->pcidmaclk_reg, addrbase + VIA_CRDR_PCIDMACLK); + writeb(pm_pcictrl_reg->pciintctrl_reg, addrbase + VIA_CRDR_PCIINTCTRL); + writeb(pm_pcictrl_reg->pciintstatus_reg, + addrbase + VIA_CRDR_PCIINTSTATUS); + writeb(pm_pcictrl_reg->pcitmoctrl_reg, addrbase + VIA_CRDR_PCITMOCTRL); +} + +static void via_save_sdcreg(struct via_crdr_mmc_host *host) +{ + struct sdhcreg *pm_sdhc_reg; + void __iomem *addrbase; + + pm_sdhc_reg = &(host->pm_sdhc_reg); + addrbase = host->sdhc_mmiobase; + + pm_sdhc_reg->sdcontrol_reg = readl(addrbase + VIA_CRDR_SDCTRL); + pm_sdhc_reg->sdcmdarg_reg = readl(addrbase + VIA_CRDR_SDCARG); + pm_sdhc_reg->sdbusmode_reg = readl(addrbase + VIA_CRDR_SDBUSMODE); + pm_sdhc_reg->sdblklen_reg = readl(addrbase + VIA_CRDR_SDBLKLEN); + pm_sdhc_reg->sdcurblkcnt_reg = readl(addrbase + VIA_CRDR_SDCURBLKCNT); + pm_sdhc_reg->sdintmask_reg = readl(addrbase + VIA_CRDR_SDINTMASK); + pm_sdhc_reg->sdstatus_reg = readl(addrbase + VIA_CRDR_SDSTATUS); + pm_sdhc_reg->sdrsptmo_reg = readl(addrbase + VIA_CRDR_SDRSPTMO); + pm_sdhc_reg->sdclksel_reg = readl(addrbase + VIA_CRDR_SDCLKSEL); + pm_sdhc_reg->sdextctrl_reg = readl(addrbase + VIA_CRDR_SDEXTCTRL); +} + +static void via_restore_sdcreg(struct via_crdr_mmc_host *host) +{ + struct sdhcreg *pm_sdhc_reg; + void __iomem *addrbase; + + pm_sdhc_reg = &(host->pm_sdhc_reg); + addrbase = host->sdhc_mmiobase; + + writel(pm_sdhc_reg->sdcontrol_reg, addrbase + VIA_CRDR_SDCTRL); + writel(pm_sdhc_reg->sdcmdarg_reg, addrbase + VIA_CRDR_SDCARG); + writel(pm_sdhc_reg->sdbusmode_reg, addrbase + VIA_CRDR_SDBUSMODE); + writel(pm_sdhc_reg->sdblklen_reg, addrbase + VIA_CRDR_SDBLKLEN); + writel(pm_sdhc_reg->sdcurblkcnt_reg, addrbase + VIA_CRDR_SDCURBLKCNT); + writel(pm_sdhc_reg->sdintmask_reg, addrbase + VIA_CRDR_SDINTMASK); + writel(pm_sdhc_reg->sdstatus_reg, addrbase + VIA_CRDR_SDSTATUS); + writel(pm_sdhc_reg->sdrsptmo_reg, addrbase + VIA_CRDR_SDRSPTMO); + writel(pm_sdhc_reg->sdclksel_reg, addrbase + VIA_CRDR_SDCLKSEL); + writel(pm_sdhc_reg->sdextctrl_reg, addrbase + VIA_CRDR_SDEXTCTRL); +} + +static void via_pwron_sleep(struct via_crdr_mmc_host *sdhost) +{ + if (sdhost->quirks & VIA_CRDR_QUIRK_300MS_PWRDELAY) + msleep(300); + else + msleep(3); +} + +static void via_set_ddma(struct via_crdr_mmc_host *host, + dma_addr_t dmaaddr, u32 count, int dir, int enirq) +{ + void __iomem *addrbase; + u32 ctrl_data = 0; + + if (enirq) + ctrl_data |= VIA_CRDR_DMACTRL_ENIRQ; + + if (dir) + ctrl_data |= VIA_CRDR_DMACTRL_DIR; + + addrbase = host->ddma_mmiobase; + + writel(dmaaddr, addrbase + VIA_CRDR_DMABASEADD); + writel(count, addrbase + VIA_CRDR_DMACOUNTER); + writel(ctrl_data, addrbase + VIA_CRDR_DMACTRL); + writel(0x01, addrbase + VIA_CRDR_DMASTART); + + /* It seems that our DMA can not work normally with 375kHz clock */ + /* FIXME: don't brute-force 8MHz but use PIO at 375kHz !! */ + addrbase = host->pcictrl_mmiobase; + if (readb(addrbase + VIA_CRDR_PCISDCCLK) == PCI_CLK_375K) { + dev_info(host->mmc->parent, "forcing card speed to 8MHz\n"); + writeb(PCI_CLK_8M, addrbase + VIA_CRDR_PCISDCCLK); + } +} + +static void via_sdc_preparedata(struct via_crdr_mmc_host *host, + struct mmc_data *data) +{ + void __iomem *addrbase; + u32 blk_reg; + int count; + + WARN_ON(host->data); + + /* Sanity checks */ + BUG_ON(data->blksz > host->mmc->max_blk_size); + BUG_ON(data->blocks > host->mmc->max_blk_count); + + host->data = data; + + count = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + ((data->flags & MMC_DATA_READ) ? + PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE)); + BUG_ON(count != 1); + + via_set_ddma(host, sg_dma_address(data->sg), sg_dma_len(data->sg), + (data->flags & MMC_DATA_WRITE) ? 1 : 0, 1); + + addrbase = host->sdhc_mmiobase; + + blk_reg = data->blksz - 1; + blk_reg |= VIA_CRDR_SDBLKLEN_GPIDET | VIA_CRDR_SDBLKLEN_INTEN; + blk_reg |= (data->blocks) << 16; + + writel(blk_reg, addrbase + VIA_CRDR_SDBLKLEN); +} + +static void via_sdc_get_response(struct via_crdr_mmc_host *host, + struct mmc_command *cmd) +{ + void __iomem *addrbase = host->sdhc_mmiobase; + u32 dwdata0 = readl(addrbase + VIA_CRDR_SDRESP0); + u32 dwdata1 = readl(addrbase + VIA_CRDR_SDRESP1); + u32 dwdata2 = readl(addrbase + VIA_CRDR_SDRESP2); + u32 dwdata3 = readl(addrbase + VIA_CRDR_SDRESP3); + + if (cmd->flags & MMC_RSP_136) { + cmd->resp[0] = ((u8) (dwdata1)) | + (((u8) (dwdata0 >> 24)) << 8) | + (((u8) (dwdata0 >> 16)) << 16) | + (((u8) (dwdata0 >> 8)) << 24); + + cmd->resp[1] = ((u8) (dwdata2)) | + (((u8) (dwdata1 >> 24)) << 8) | + (((u8) (dwdata1 >> 16)) << 16) | + (((u8) (dwdata1 >> 8)) << 24); + + cmd->resp[2] = ((u8) (dwdata3)) | + (((u8) (dwdata2 >> 24)) << 8) | + (((u8) (dwdata2 >> 16)) << 16) | + (((u8) (dwdata2 >> 8)) << 24); + + cmd->resp[3] = 0xff | + ((((u8) (dwdata3 >> 24))) << 8) | + (((u8) (dwdata3 >> 16)) << 16) | + (((u8) (dwdata3 >> 8)) << 24); + } else { + dwdata0 >>= 8; + cmd->resp[0] = ((dwdata0 & 0xff) << 24) | + (((dwdata0 >> 8) & 0xff) << 16) | + (((dwdata0 >> 16) & 0xff) << 8) | (dwdata1 & 0xff); + + dwdata1 >>= 8; + cmd->resp[1] = ((dwdata1 & 0xff) << 24) | + (((dwdata1 >> 8) & 0xff) << 16) | + (((dwdata1 >> 16) & 0xff) << 8); + } +} + +static void via_sdc_send_command(struct via_crdr_mmc_host *host, + struct mmc_command *cmd) +{ + void __iomem *addrbase; + struct mmc_data *data; + u32 cmdctrl = 0; + + WARN_ON(host->cmd); + + data = cmd->data; + mod_timer(&host->timer, jiffies + HZ); + host->cmd = cmd; + + /*Command index*/ + cmdctrl = cmd->opcode << 8; + + /*Response type*/ + switch (mmc_resp_type(cmd)) { + case MMC_RSP_NONE: + cmdctrl |= VIA_CRDR_SDCTRL_RSP_NONE; + break; + case MMC_RSP_R1: + cmdctrl |= VIA_CRDR_SDCTRL_RSP_R1; + break; + case MMC_RSP_R1B: + cmdctrl |= VIA_CRDR_SDCTRL_RSP_R1B; + break; + case MMC_RSP_R2: + cmdctrl |= VIA_CRDR_SDCTRL_RSP_R2; + break; + case MMC_RSP_R3: + cmdctrl |= VIA_CRDR_SDCTRL_RSP_R3; + break; + default: + pr_err("%s: cmd->flag is not valid\n", mmc_hostname(host->mmc)); + break; + } + + if (!(cmd->data)) + goto nodata; + + via_sdc_preparedata(host, data); + + /*Command control*/ + if (data->blocks > 1) { + if (data->flags & MMC_DATA_WRITE) { + cmdctrl |= VIA_CRDR_SDCTRL_WRITE; + cmdctrl |= VIA_CRDR_SDCTRL_MULTI_WR; + } else { + cmdctrl |= VIA_CRDR_SDCTRL_MULTI_RD; + } + } else { + if (data->flags & MMC_DATA_WRITE) { + cmdctrl |= VIA_CRDR_SDCTRL_WRITE; + cmdctrl |= VIA_CRDR_SDCTRL_SINGLE_WR; + } else { + cmdctrl |= VIA_CRDR_SDCTRL_SINGLE_RD; + } + } + +nodata: + if (cmd == host->mrq->stop) + cmdctrl |= VIA_CRDR_SDCTRL_STOP; + + cmdctrl |= VIA_CRDR_SDCTRL_START; + + addrbase = host->sdhc_mmiobase; + writel(cmd->arg, addrbase + VIA_CRDR_SDCARG); + writel(cmdctrl, addrbase + VIA_CRDR_SDCTRL); +} + +static void via_sdc_finish_data(struct via_crdr_mmc_host *host) +{ + struct mmc_data *data; + + BUG_ON(!host->data); + + data = host->data; + host->data = NULL; + + if (data->error) + data->bytes_xfered = 0; + else + data->bytes_xfered = data->blocks * data->blksz; + + dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + ((data->flags & MMC_DATA_READ) ? + PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE)); + + if (data->stop) + via_sdc_send_command(host, data->stop); + else + tasklet_schedule(&host->finish_tasklet); +} + +static void via_sdc_finish_command(struct via_crdr_mmc_host *host) +{ + via_sdc_get_response(host, host->cmd); + + host->cmd->error = 0; + + if (!host->cmd->data) + tasklet_schedule(&host->finish_tasklet); + + host->cmd = NULL; +} + +static void via_sdc_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + void __iomem *addrbase; + struct via_crdr_mmc_host *host; + unsigned long flags; + u16 status; + + host = mmc_priv(mmc); + + spin_lock_irqsave(&host->lock, flags); + + addrbase = host->pcictrl_mmiobase; + writeb(VIA_CRDR_PCIDMACLK_SDC, addrbase + VIA_CRDR_PCIDMACLK); + + status = readw(host->sdhc_mmiobase + VIA_CRDR_SDSTATUS); + status &= VIA_CRDR_SDSTS_W1C_MASK; + writew(status, host->sdhc_mmiobase + VIA_CRDR_SDSTATUS); + + WARN_ON(host->mrq != NULL); + host->mrq = mrq; + + status = readw(host->sdhc_mmiobase + VIA_CRDR_SDSTATUS); + if (!(status & VIA_CRDR_SDSTS_SLOTG) || host->reject) { + host->mrq->cmd->error = -ENOMEDIUM; + tasklet_schedule(&host->finish_tasklet); + } else { + via_sdc_send_command(host, mrq->cmd); + } + + mmiowb(); + spin_unlock_irqrestore(&host->lock, flags); +} + +static void via_sdc_set_power(struct via_crdr_mmc_host *host, + unsigned short power, unsigned int on) +{ + unsigned long flags; + u8 gatt; + + spin_lock_irqsave(&host->lock, flags); + + host->power = (1 << power); + + gatt = readb(host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT); + if (host->power == MMC_VDD_165_195) + gatt &= ~VIA_CRDR_PCICLKGATT_3V3; + else + gatt |= VIA_CRDR_PCICLKGATT_3V3; + if (on) + gatt |= VIA_CRDR_PCICLKGATT_PAD_PWRON; + else + gatt &= ~VIA_CRDR_PCICLKGATT_PAD_PWRON; + writeb(gatt, host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT); + + mmiowb(); + spin_unlock_irqrestore(&host->lock, flags); + + via_pwron_sleep(host); +} + +static void via_sdc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct via_crdr_mmc_host *host; + unsigned long flags; + void __iomem *addrbase; + u32 org_data, sdextctrl; + u8 clock; + + host = mmc_priv(mmc); + + spin_lock_irqsave(&host->lock, flags); + + addrbase = host->sdhc_mmiobase; + org_data = readl(addrbase + VIA_CRDR_SDBUSMODE); + sdextctrl = readl(addrbase + VIA_CRDR_SDEXTCTRL); + + if (ios->bus_width == MMC_BUS_WIDTH_1) + org_data &= ~VIA_CRDR_SDMODE_4BIT; + else + org_data |= VIA_CRDR_SDMODE_4BIT; + + if (ios->power_mode == MMC_POWER_OFF) + org_data &= ~VIA_CRDR_SDMODE_CLK_ON; + else + org_data |= VIA_CRDR_SDMODE_CLK_ON; + + if (ios->timing == MMC_TIMING_SD_HS) + sdextctrl |= VIA_CRDR_SDEXTCTRL_HISPD; + else + sdextctrl &= ~VIA_CRDR_SDEXTCTRL_HISPD; + + writel(org_data, addrbase + VIA_CRDR_SDBUSMODE); + writel(sdextctrl, addrbase + VIA_CRDR_SDEXTCTRL); + + if (ios->clock >= 48000000) + clock = PCI_CLK_48M; + else if (ios->clock >= 33000000) + clock = PCI_CLK_33M; + else if (ios->clock >= 24000000) + clock = PCI_CLK_24M; + else if (ios->clock >= 16000000) + clock = PCI_CLK_16M; + else if (ios->clock >= 12000000) + clock = PCI_CLK_12M; + else if (ios->clock >= 8000000) + clock = PCI_CLK_8M; + else + clock = PCI_CLK_375K; + + addrbase = host->pcictrl_mmiobase; + if (readb(addrbase + VIA_CRDR_PCISDCCLK) != clock) + writeb(clock, addrbase + VIA_CRDR_PCISDCCLK); + + mmiowb(); + spin_unlock_irqrestore(&host->lock, flags); + + if (ios->power_mode != MMC_POWER_OFF) + via_sdc_set_power(host, ios->vdd, 1); + else + via_sdc_set_power(host, ios->vdd, 0); +} + +static int via_sdc_get_ro(struct mmc_host *mmc) +{ + struct via_crdr_mmc_host *host; + unsigned long flags; + u16 status; + + host = mmc_priv(mmc); + + spin_lock_irqsave(&host->lock, flags); + + status = readw(host->sdhc_mmiobase + VIA_CRDR_SDSTATUS); + + spin_unlock_irqrestore(&host->lock, flags); + + return !(status & VIA_CRDR_SDSTS_WP); +} + +static const struct mmc_host_ops via_sdc_ops = { + .request = via_sdc_request, + .set_ios = via_sdc_set_ios, + .get_ro = via_sdc_get_ro, +}; + +static void via_reset_pcictrl(struct via_crdr_mmc_host *host) +{ + void __iomem *addrbase; + unsigned long flags; + u8 gatt; + + addrbase = host->pcictrl_mmiobase; + + spin_lock_irqsave(&host->lock, flags); + + via_save_pcictrlreg(host); + via_save_sdcreg(host); + + spin_unlock_irqrestore(&host->lock, flags); + + gatt = VIA_CRDR_PCICLKGATT_PAD_PWRON; + if (host->power == MMC_VDD_165_195) + gatt &= VIA_CRDR_PCICLKGATT_3V3; + else + gatt |= VIA_CRDR_PCICLKGATT_3V3; + writeb(gatt, host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT); + via_pwron_sleep(host); + gatt |= VIA_CRDR_PCICLKGATT_SFTRST; + writeb(gatt, host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT); + msleep(3); + + spin_lock_irqsave(&host->lock, flags); + + via_restore_pcictrlreg(host); + via_restore_sdcreg(host); + + mmiowb(); + spin_unlock_irqrestore(&host->lock, flags); +} + +static void via_sdc_cmd_isr(struct via_crdr_mmc_host *host, u16 intmask) +{ + BUG_ON(intmask == 0); + + if (!host->cmd) { + pr_err("%s: Got command interrupt 0x%x even " + "though no command operation was in progress.\n", + mmc_hostname(host->mmc), intmask); + return; + } + + if (intmask & VIA_CRDR_SDSTS_CRTO) + host->cmd->error = -ETIMEDOUT; + else if (intmask & VIA_CRDR_SDSTS_SC) + host->cmd->error = -EILSEQ; + + if (host->cmd->error) + tasklet_schedule(&host->finish_tasklet); + else if (intmask & VIA_CRDR_SDSTS_CRD) + via_sdc_finish_command(host); +} + +static void via_sdc_data_isr(struct via_crdr_mmc_host *host, u16 intmask) +{ + BUG_ON(intmask == 0); + + if (intmask & VIA_CRDR_SDSTS_DT) + host->data->error = -ETIMEDOUT; + else if (intmask & (VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC)) + host->data->error = -EILSEQ; + + via_sdc_finish_data(host); +} + +static irqreturn_t via_sdc_isr(int irq, void *dev_id) +{ + struct via_crdr_mmc_host *sdhost = dev_id; + void __iomem *addrbase; + u8 pci_status; + u16 sd_status; + irqreturn_t result; + + if (!sdhost) + return IRQ_NONE; + + spin_lock(&sdhost->lock); + + addrbase = sdhost->pcictrl_mmiobase; + pci_status = readb(addrbase + VIA_CRDR_PCIINTSTATUS); + if (!(pci_status & VIA_CRDR_PCIINTSTATUS_SDC)) { + result = IRQ_NONE; + goto out; + } + + addrbase = sdhost->sdhc_mmiobase; + sd_status = readw(addrbase + VIA_CRDR_SDSTATUS); + sd_status &= VIA_CRDR_SDSTS_INT_MASK; + sd_status &= ~VIA_CRDR_SDSTS_IGN_MASK; + if (!sd_status) { + result = IRQ_NONE; + goto out; + } + + if (sd_status & VIA_CRDR_SDSTS_CIR) { + writew(sd_status & VIA_CRDR_SDSTS_CIR, + addrbase + VIA_CRDR_SDSTATUS); + + schedule_work(&sdhost->carddet_work); + } + + sd_status &= ~VIA_CRDR_SDSTS_CIR; + if (sd_status & VIA_CRDR_SDSTS_CMD_MASK) { + writew(sd_status & VIA_CRDR_SDSTS_CMD_MASK, + addrbase + VIA_CRDR_SDSTATUS); + via_sdc_cmd_isr(sdhost, sd_status & VIA_CRDR_SDSTS_CMD_MASK); + } + if (sd_status & VIA_CRDR_SDSTS_DATA_MASK) { + writew(sd_status & VIA_CRDR_SDSTS_DATA_MASK, + addrbase + VIA_CRDR_SDSTATUS); + via_sdc_data_isr(sdhost, sd_status & VIA_CRDR_SDSTS_DATA_MASK); + } + + sd_status &= ~(VIA_CRDR_SDSTS_CMD_MASK | VIA_CRDR_SDSTS_DATA_MASK); + if (sd_status) { + pr_err("%s: Unexpected interrupt 0x%x\n", + mmc_hostname(sdhost->mmc), sd_status); + writew(sd_status, addrbase + VIA_CRDR_SDSTATUS); + } + + result = IRQ_HANDLED; + + mmiowb(); +out: + spin_unlock(&sdhost->lock); + + return result; +} + +static void via_sdc_timeout(unsigned long ulongdata) +{ + struct via_crdr_mmc_host *sdhost; + unsigned long flags; + + sdhost = (struct via_crdr_mmc_host *)ulongdata; + + spin_lock_irqsave(&sdhost->lock, flags); + + if (sdhost->mrq) { + pr_err("%s: Timeout waiting for hardware interrupt." + "cmd:0x%x\n", mmc_hostname(sdhost->mmc), + sdhost->mrq->cmd->opcode); + + if (sdhost->data) { + writel(VIA_CRDR_DMACTRL_SFTRST, + sdhost->ddma_mmiobase + VIA_CRDR_DMACTRL); + sdhost->data->error = -ETIMEDOUT; + via_sdc_finish_data(sdhost); + } else { + if (sdhost->cmd) + sdhost->cmd->error = -ETIMEDOUT; + else + sdhost->mrq->cmd->error = -ETIMEDOUT; + tasklet_schedule(&sdhost->finish_tasklet); + } + } + + mmiowb(); + spin_unlock_irqrestore(&sdhost->lock, flags); +} + +static void via_sdc_tasklet_finish(unsigned long param) +{ + struct via_crdr_mmc_host *host; + unsigned long flags; + struct mmc_request *mrq; + + host = (struct via_crdr_mmc_host *)param; + + spin_lock_irqsave(&host->lock, flags); + + del_timer(&host->timer); + mrq = host->mrq; + host->mrq = NULL; + host->cmd = NULL; + host->data = NULL; + + spin_unlock_irqrestore(&host->lock, flags); + + mmc_request_done(host->mmc, mrq); +} + +static void via_sdc_card_detect(struct work_struct *work) +{ + struct via_crdr_mmc_host *host; + void __iomem *addrbase; + unsigned long flags; + u16 status; + + host = container_of(work, struct via_crdr_mmc_host, carddet_work); + + addrbase = host->ddma_mmiobase; + writel(VIA_CRDR_DMACTRL_SFTRST, addrbase + VIA_CRDR_DMACTRL); + + spin_lock_irqsave(&host->lock, flags); + + addrbase = host->pcictrl_mmiobase; + writeb(VIA_CRDR_PCIDMACLK_SDC, addrbase + VIA_CRDR_PCIDMACLK); + + addrbase = host->sdhc_mmiobase; + status = readw(addrbase + VIA_CRDR_SDSTATUS); + if (!(status & VIA_CRDR_SDSTS_SLOTG)) { + if (host->mrq) { + pr_err("%s: Card removed during transfer!\n", + mmc_hostname(host->mmc)); + host->mrq->cmd->error = -ENOMEDIUM; + tasklet_schedule(&host->finish_tasklet); + } + + mmiowb(); + spin_unlock_irqrestore(&host->lock, flags); + + via_reset_pcictrl(host); + + spin_lock_irqsave(&host->lock, flags); + } + + mmiowb(); + spin_unlock_irqrestore(&host->lock, flags); + + via_print_pcictrl(host); + via_print_sdchc(host); + + mmc_detect_change(host->mmc, msecs_to_jiffies(500)); +} + +static void via_init_mmc_host(struct via_crdr_mmc_host *host) +{ + struct mmc_host *mmc = host->mmc; + void __iomem *addrbase; + u32 lenreg; + u32 status; + + init_timer(&host->timer); + host->timer.data = (unsigned long)host; + host->timer.function = via_sdc_timeout; + + spin_lock_init(&host->lock); + + mmc->f_min = VIA_CRDR_MIN_CLOCK; + mmc->f_max = VIA_CRDR_MAX_CLOCK; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; + mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED; + mmc->ops = &via_sdc_ops; + + /*Hardware cannot do scatter lists*/ + mmc->max_hw_segs = 1; + mmc->max_phys_segs = 1; + + mmc->max_blk_size = VIA_CRDR_MAX_BLOCK_LENGTH; + mmc->max_blk_count = VIA_CRDR_MAX_BLOCK_COUNT; + + mmc->max_seg_size = mmc->max_blk_size * mmc->max_blk_count; + mmc->max_req_size = mmc->max_seg_size; + + INIT_WORK(&host->carddet_work, via_sdc_card_detect); + + tasklet_init(&host->finish_tasklet, via_sdc_tasklet_finish, + (unsigned long)host); + + addrbase = host->sdhc_mmiobase; + writel(0x0, addrbase + VIA_CRDR_SDINTMASK); + msleep(1); + + lenreg = VIA_CRDR_SDBLKLEN_GPIDET | VIA_CRDR_SDBLKLEN_INTEN; + writel(lenreg, addrbase + VIA_CRDR_SDBLKLEN); + + status = readw(addrbase + VIA_CRDR_SDSTATUS); + status &= VIA_CRDR_SDSTS_W1C_MASK; + writew(status, addrbase + VIA_CRDR_SDSTATUS); + + status = readw(addrbase + VIA_CRDR_SDSTATUS2); + status |= VIA_CRDR_SDSTS_CFE; + writew(status, addrbase + VIA_CRDR_SDSTATUS2); + + writeb(0x0, addrbase + VIA_CRDR_SDEXTCTRL); + + writel(VIA_CRDR_SDACTIVE_INTMASK, addrbase + VIA_CRDR_SDINTMASK); + msleep(1); +} + +static int __devinit via_sd_probe(struct pci_dev *pcidev, + const struct pci_device_id *id) +{ + struct mmc_host *mmc; + struct via_crdr_mmc_host *sdhost; + u32 base, len; + u8 rev, gatt; + int ret; + + pci_read_config_byte(pcidev, PCI_CLASS_REVISION, &rev); + pr_info(DRV_NAME + ": VIA SDMMC controller found at %s [%04x:%04x] (rev %x)\n", + pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device, + (int)rev); + + ret = pci_enable_device(pcidev); + if (ret) + return ret; + + ret = pci_request_regions(pcidev, DRV_NAME); + if (ret) + goto disable; + + pci_write_config_byte(pcidev, VIA_CRDR_PCI_WORK_MODE, 0); + pci_write_config_byte(pcidev, VIA_CRDR_PCI_DBG_MODE, 0); + + mmc = mmc_alloc_host(sizeof(struct via_crdr_mmc_host), &pcidev->dev); + if (!mmc) { + ret = -ENOMEM; + goto release; + } + + sdhost = mmc_priv(mmc); + sdhost->mmc = mmc; + dev_set_drvdata(&pcidev->dev, sdhost); + + len = pci_resource_len(pcidev, 0); + base = pci_resource_start(pcidev, 0); + sdhost->mmiobase = ioremap_nocache(base, len); + if (!sdhost->mmiobase) { + ret = -ENOMEM; + goto free_mmc_host; + } + + sdhost->sdhc_mmiobase = + sdhost->mmiobase + VIA_CRDR_SDC_OFF; + sdhost->ddma_mmiobase = + sdhost->mmiobase + VIA_CRDR_DDMA_OFF; + sdhost->pcictrl_mmiobase = + sdhost->mmiobase + VIA_CRDR_PCICTRL_OFF; + + sdhost->power = MMC_VDD_165_195; + + gatt = VIA_CRDR_PCICLKGATT_3V3 | VIA_CRDR_PCICLKGATT_PAD_PWRON; + writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT); + via_pwron_sleep(sdhost); + gatt |= VIA_CRDR_PCICLKGATT_SFTRST; + writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT); + msleep(3); + + via_init_mmc_host(sdhost); + + ret = + request_irq(pcidev->irq, via_sdc_isr, IRQF_SHARED, DRV_NAME, + sdhost); + if (ret) + goto unmap; + + writeb(VIA_CRDR_PCIINTCTRL_SDCIRQEN, + sdhost->pcictrl_mmiobase + VIA_CRDR_PCIINTCTRL); + writeb(VIA_CRDR_PCITMOCTRL_1024MS, + sdhost->pcictrl_mmiobase + VIA_CRDR_PCITMOCTRL); + + /* device-specific quirks */ + if (pcidev->subsystem_vendor == PCI_VENDOR_ID_LENOVO && + pcidev->subsystem_device == 0x3891) + sdhost->quirks = VIA_CRDR_QUIRK_300MS_PWRDELAY; + + mmc_add_host(mmc); + + return 0; + +unmap: + iounmap(sdhost->mmiobase); +free_mmc_host: + dev_set_drvdata(&pcidev->dev, NULL); + mmc_free_host(mmc); +release: + pci_release_regions(pcidev); +disable: + pci_disable_device(pcidev); + + return ret; +} + +static void __devexit via_sd_remove(struct pci_dev *pcidev) +{ + struct via_crdr_mmc_host *sdhost = pci_get_drvdata(pcidev); + unsigned long flags; + u8 gatt; + + spin_lock_irqsave(&sdhost->lock, flags); + + /* Ensure we don't accept more commands from mmc layer */ + sdhost->reject = 1; + + /* Disable generating further interrupts */ + writeb(0x0, sdhost->pcictrl_mmiobase + VIA_CRDR_PCIINTCTRL); + mmiowb(); + + if (sdhost->mrq) { + printk(KERN_ERR "%s: Controller removed during " + "transfer\n", mmc_hostname(sdhost->mmc)); + + /* make sure all DMA is stopped */ + writel(VIA_CRDR_DMACTRL_SFTRST, + sdhost->ddma_mmiobase + VIA_CRDR_DMACTRL); + mmiowb(); + sdhost->mrq->cmd->error = -ENOMEDIUM; + if (sdhost->mrq->stop) + sdhost->mrq->stop->error = -ENOMEDIUM; + tasklet_schedule(&sdhost->finish_tasklet); + } + spin_unlock_irqrestore(&sdhost->lock, flags); + + mmc_remove_host(sdhost->mmc); + + free_irq(pcidev->irq, sdhost); + + del_timer_sync(&sdhost->timer); + + tasklet_kill(&sdhost->finish_tasklet); + + /* switch off power */ + gatt = readb(sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT); + gatt &= ~VIA_CRDR_PCICLKGATT_PAD_PWRON; + writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT); + + iounmap(sdhost->mmiobase); + dev_set_drvdata(&pcidev->dev, NULL); + mmc_free_host(sdhost->mmc); + pci_release_regions(pcidev); + pci_disable_device(pcidev); + + pr_info(DRV_NAME + ": VIA SDMMC controller at %s [%04x:%04x] has been removed\n", + pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device); +} + +#ifdef CONFIG_PM + +static void via_init_sdc_pm(struct via_crdr_mmc_host *host) +{ + struct sdhcreg *pm_sdhcreg; + void __iomem *addrbase; + u32 lenreg; + u16 status; + + pm_sdhcreg = &(host->pm_sdhc_reg); + addrbase = host->sdhc_mmiobase; + + writel(0x0, addrbase + VIA_CRDR_SDINTMASK); + + lenreg = VIA_CRDR_SDBLKLEN_GPIDET | VIA_CRDR_SDBLKLEN_INTEN; + writel(lenreg, addrbase + VIA_CRDR_SDBLKLEN); + + status = readw(addrbase + VIA_CRDR_SDSTATUS); + status &= VIA_CRDR_SDSTS_W1C_MASK; + writew(status, addrbase + VIA_CRDR_SDSTATUS); + + status = readw(addrbase + VIA_CRDR_SDSTATUS2); + status |= VIA_CRDR_SDSTS_CFE; + writew(status, addrbase + VIA_CRDR_SDSTATUS2); + + writel(pm_sdhcreg->sdcontrol_reg, addrbase + VIA_CRDR_SDCTRL); + writel(pm_sdhcreg->sdcmdarg_reg, addrbase + VIA_CRDR_SDCARG); + writel(pm_sdhcreg->sdintmask_reg, addrbase + VIA_CRDR_SDINTMASK); + writel(pm_sdhcreg->sdrsptmo_reg, addrbase + VIA_CRDR_SDRSPTMO); + writel(pm_sdhcreg->sdclksel_reg, addrbase + VIA_CRDR_SDCLKSEL); + writel(pm_sdhcreg->sdextctrl_reg, addrbase + VIA_CRDR_SDEXTCTRL); + + via_print_pcictrl(host); + via_print_sdchc(host); +} + +static int via_sd_suspend(struct pci_dev *pcidev, pm_message_t state) +{ + struct via_crdr_mmc_host *host; + int ret = 0; + + host = pci_get_drvdata(pcidev); + + via_save_pcictrlreg(host); + via_save_sdcreg(host); + + ret = mmc_suspend_host(host->mmc, state); + + pci_save_state(pcidev); + pci_enable_wake(pcidev, pci_choose_state(pcidev, state), 0); + pci_disable_device(pcidev); + pci_set_power_state(pcidev, pci_choose_state(pcidev, state)); + + return ret; +} + +static int via_sd_resume(struct pci_dev *pcidev) +{ + struct via_crdr_mmc_host *sdhost; + int ret = 0; + u8 gatt; + + sdhost = pci_get_drvdata(pcidev); + + gatt = VIA_CRDR_PCICLKGATT_PAD_PWRON; + if (sdhost->power == MMC_VDD_165_195) + gatt &= ~VIA_CRDR_PCICLKGATT_3V3; + else + gatt |= VIA_CRDR_PCICLKGATT_3V3; + writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT); + via_pwron_sleep(sdhost); + gatt |= VIA_CRDR_PCICLKGATT_SFTRST; + writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT); + msleep(3); + + msleep(100); + + pci_set_power_state(pcidev, PCI_D0); + pci_restore_state(pcidev); + ret = pci_enable_device(pcidev); + if (ret) + return ret; + + via_restore_pcictrlreg(sdhost); + via_init_sdc_pm(sdhost); + + ret = mmc_resume_host(sdhost->mmc); + + return ret; +} + +#else /* CONFIG_PM */ + +#define via_sd_suspend NULL +#define via_sd_resume NULL + +#endif /* CONFIG_PM */ + +static struct pci_driver via_sd_driver = { + .name = DRV_NAME, + .id_table = via_ids, + .probe = via_sd_probe, + .remove = __devexit_p(via_sd_remove), + .suspend = via_sd_suspend, + .resume = via_sd_resume, +}; + +static int __init via_sd_drv_init(void) +{ + pr_info(DRV_NAME ": VIA SD/MMC Card Reader driver " + "(C) 2008 VIA Technologies, Inc.\n"); + + return pci_register_driver(&via_sd_driver); +} + +static void __exit via_sd_drv_exit(void) +{ + pci_unregister_driver(&via_sd_driver); +} + +module_init(via_sd_drv_init); +module_exit(via_sd_drv_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("VIA Technologies Inc."); +MODULE_DESCRIPTION("VIA SD/MMC Card Interface driver"); |