summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/davinci_nand.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/davinci_nand.c')
-rw-r--r--drivers/mtd/nand/davinci_nand.c210
1 files changed, 91 insertions, 119 deletions
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 8cb821b6686e..cc07ba0f044d 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -34,7 +34,6 @@
#include <linux/slab.h>
#include <linux/of_device.h>
#include <linux/of.h>
-#include <linux/of_mtd.h>
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
@@ -54,7 +53,6 @@
*/
struct davinci_nand_info {
struct nand_chip chip;
- struct nand_ecclayout ecclayout;
struct device *dev;
struct clk *clk;
@@ -480,63 +478,46 @@ static int nand_davinci_dev_ready(struct mtd_info *mtd)
* ten ECC bytes plus the manufacturer's bad block marker byte, and
* and not overlapping the default BBT markers.
*/
-static struct nand_ecclayout hwecc4_small = {
- .eccbytes = 10,
- .eccpos = { 0, 1, 2, 3, 4,
- /* offset 5 holds the badblock marker */
- 6, 7,
- 13, 14, 15, },
- .oobfree = {
- {.offset = 8, .length = 5, },
- {.offset = 16, },
- },
-};
+static int hwecc4_ooblayout_small_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 2)
+ return -ERANGE;
+
+ if (!section) {
+ oobregion->offset = 0;
+ oobregion->length = 5;
+ } else if (section == 1) {
+ oobregion->offset = 6;
+ oobregion->length = 2;
+ } else {
+ oobregion->offset = 13;
+ oobregion->length = 3;
+ }
-/* An ECC layout for using 4-bit ECC with large-page (2048bytes) flash,
- * storing ten ECC bytes plus the manufacturer's bad block marker byte,
- * and not overlapping the default BBT markers.
- */
-static struct nand_ecclayout hwecc4_2048 = {
- .eccbytes = 40,
- .eccpos = {
- /* at the end of spare sector */
- 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,
- 34, 35, 36, 37, 38, 39, 40, 41, 42, 43,
- 44, 45, 46, 47, 48, 49, 50, 51, 52, 53,
- 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
- },
- .oobfree = {
- /* 2 bytes at offset 0 hold manufacturer badblock markers */
- {.offset = 2, .length = 22, },
- /* 5 bytes at offset 8 hold BBT markers */
- /* 8 bytes at offset 16 hold JFFS2 clean markers */
- },
-};
+ return 0;
+}
-/*
- * An ECC layout for using 4-bit ECC with large-page (4096bytes) flash,
- * storing ten ECC bytes plus the manufacturer's bad block marker byte,
- * and not overlapping the default BBT markers.
- */
-static struct nand_ecclayout hwecc4_4096 = {
- .eccbytes = 80,
- .eccpos = {
- /* at the end of spare sector */
- 48, 49, 50, 51, 52, 53, 54, 55, 56, 57,
- 58, 59, 60, 61, 62, 63, 64, 65, 66, 67,
- 68, 69, 70, 71, 72, 73, 74, 75, 76, 77,
- 78, 79, 80, 81, 82, 83, 84, 85, 86, 87,
- 88, 89, 90, 91, 92, 93, 94, 95, 96, 97,
- 98, 99, 100, 101, 102, 103, 104, 105, 106, 107,
- 108, 109, 110, 111, 112, 113, 114, 115, 116, 117,
- 118, 119, 120, 121, 122, 123, 124, 125, 126, 127,
- },
- .oobfree = {
- /* 2 bytes at offset 0 hold manufacturer badblock markers */
- {.offset = 2, .length = 46, },
- /* 5 bytes at offset 8 hold BBT markers */
- /* 8 bytes at offset 16 hold JFFS2 clean markers */
- },
+static int hwecc4_ooblayout_small_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 1)
+ return -ERANGE;
+
+ if (!section) {
+ oobregion->offset = 8;
+ oobregion->length = 5;
+ } else {
+ oobregion->offset = 16;
+ oobregion->length = mtd->oobsize - 16;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops hwecc4_small_ooblayout_ops = {
+ .ecc = hwecc4_ooblayout_small_ecc,
+ .free = hwecc4_ooblayout_small_free,
};
#if defined(CONFIG_OF)
@@ -577,8 +558,6 @@ static struct davinci_nand_pdata
"ti,davinci-mask-chipsel", &prop))
pdata->mask_chipsel = prop;
if (!of_property_read_string(pdev->dev.of_node,
- "nand-ecc-mode", &mode) ||
- !of_property_read_string(pdev->dev.of_node,
"ti,davinci-ecc-mode", &mode)) {
if (!strncmp("none", mode, 4))
pdata->ecc_mode = NAND_ECC_NONE;
@@ -591,14 +570,11 @@ static struct davinci_nand_pdata
"ti,davinci-ecc-bits", &prop))
pdata->ecc_bits = prop;
- prop = of_get_nand_bus_width(pdev->dev.of_node);
- if (0 < prop || !of_property_read_u32(pdev->dev.of_node,
- "ti,davinci-nand-buswidth", &prop))
- if (prop == 16)
- pdata->options |= NAND_BUSWIDTH_16;
+ if (!of_property_read_u32(pdev->dev.of_node,
+ "ti,davinci-nand-buswidth", &prop) && prop == 16)
+ pdata->options |= NAND_BUSWIDTH_16;
+
if (of_property_read_bool(pdev->dev.of_node,
- "nand-on-flash-bbt") ||
- of_property_read_bool(pdev->dev.of_node,
"ti,davinci-nand-use-bbt"))
pdata->bbt_options = NAND_BBT_USE_FLASH;
@@ -628,7 +604,6 @@ static int nand_davinci_probe(struct platform_device *pdev)
void __iomem *base;
int ret;
uint32_t val;
- nand_ecc_modes_t ecc_mode;
struct mtd_info *mtd;
pdata = nand_davinci_get_pdata(pdev);
@@ -712,13 +687,53 @@ static int nand_davinci_probe(struct platform_device *pdev)
info->chip.write_buf = nand_davinci_write_buf;
/* Use board-specific ECC config */
- ecc_mode = pdata->ecc_mode;
+ info->chip.ecc.mode = pdata->ecc_mode;
ret = -EINVAL;
- switch (ecc_mode) {
+
+ info->clk = devm_clk_get(&pdev->dev, "aemif");
+ if (IS_ERR(info->clk)) {
+ ret = PTR_ERR(info->clk);
+ dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(info->clk);
+ if (ret < 0) {
+ dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
+ ret);
+ goto err_clk_enable;
+ }
+
+ spin_lock_irq(&davinci_nand_lock);
+
+ /* put CSxNAND into NAND mode */
+ val = davinci_nand_readl(info, NANDFCR_OFFSET);
+ val |= BIT(info->core_chipsel);
+ davinci_nand_writel(info, NANDFCR_OFFSET, val);
+
+ spin_unlock_irq(&davinci_nand_lock);
+
+ /* Scan to find existence of the device(s) */
+ ret = nand_scan_ident(mtd, pdata->mask_chipsel ? 2 : 1, NULL);
+ if (ret < 0) {
+ dev_dbg(&pdev->dev, "no NAND chip(s) found\n");
+ goto err;
+ }
+
+ switch (info->chip.ecc.mode) {
case NAND_ECC_NONE:
+ pdata->ecc_bits = 0;
+ break;
case NAND_ECC_SOFT:
pdata->ecc_bits = 0;
+ /*
+ * This driver expects Hamming based ECC when ecc_mode is set
+ * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_HAMMING to
+ * avoid adding an extra ->ecc_algo field to
+ * davinci_nand_pdata.
+ */
+ info->chip.ecc.algo = NAND_ECC_HAMMING;
break;
case NAND_ECC_HW:
if (pdata->ecc_bits == 4) {
@@ -754,37 +769,6 @@ static int nand_davinci_probe(struct platform_device *pdev)
default:
return -EINVAL;
}
- info->chip.ecc.mode = ecc_mode;
-
- info->clk = devm_clk_get(&pdev->dev, "aemif");
- if (IS_ERR(info->clk)) {
- ret = PTR_ERR(info->clk);
- dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
- return ret;
- }
-
- ret = clk_prepare_enable(info->clk);
- if (ret < 0) {
- dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
- ret);
- goto err_clk_enable;
- }
-
- spin_lock_irq(&davinci_nand_lock);
-
- /* put CSxNAND into NAND mode */
- val = davinci_nand_readl(info, NANDFCR_OFFSET);
- val |= BIT(info->core_chipsel);
- davinci_nand_writel(info, NANDFCR_OFFSET, val);
-
- spin_unlock_irq(&davinci_nand_lock);
-
- /* Scan to find existence of the device(s) */
- ret = nand_scan_ident(mtd, pdata->mask_chipsel ? 2 : 1, NULL);
- if (ret < 0) {
- dev_dbg(&pdev->dev, "no NAND chip(s) found\n");
- goto err;
- }
/* Update ECC layout if needed ... for 1-bit HW ECC, the default
* is OK, but it allocates 6 bytes when only 3 are needed (for
@@ -805,26 +789,14 @@ static int nand_davinci_probe(struct platform_device *pdev)
* table marker fits in the free bytes.
*/
if (chunks == 1) {
- info->ecclayout = hwecc4_small;
- info->ecclayout.oobfree[1].length = mtd->oobsize - 16;
- goto syndrome_done;
- }
- if (chunks == 4) {
- info->ecclayout = hwecc4_2048;
- info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST;
- goto syndrome_done;
- }
- if (chunks == 8) {
- info->ecclayout = hwecc4_4096;
+ mtd_set_ooblayout(mtd, &hwecc4_small_ooblayout_ops);
+ } else if (chunks == 4 || chunks == 8) {
+ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST;
- goto syndrome_done;
+ } else {
+ ret = -EIO;
+ goto err;
}
-
- ret = -EIO;
- goto err;
-
-syndrome_done:
- info->chip.ecc.layout = &info->ecclayout;
}
ret = nand_scan_tail(mtd);
@@ -850,7 +822,7 @@ err:
err_clk_enable:
spin_lock_irq(&davinci_nand_lock);
- if (ecc_mode == NAND_ECC_HW_SYNDROME)
+ if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME)
ecc4_busy = false;
spin_unlock_irq(&davinci_nand_lock);
return ret;
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-13 06:35:34 +0200