summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/nand_base.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/nand_base.c')
-rw-r--r--drivers/mtd/nand/nand_base.c41
1 files changed, 30 insertions, 11 deletions
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index df7eb4ff07d1..c2e1232cd45c 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -386,7 +386,7 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
uint8_t buf[2] = { 0, 0 };
int ret = 0, res, i = 0;
- ops.datbuf = NULL;
+ memset(&ops, 0, sizeof(ops));
ops.oobbuf = buf;
ops.ooboffs = chip->badblockpos;
if (chip->options & NAND_BUSWIDTH_16) {
@@ -566,6 +566,25 @@ void nand_wait_ready(struct mtd_info *mtd)
EXPORT_SYMBOL_GPL(nand_wait_ready);
/**
+ * nand_wait_status_ready - [GENERIC] Wait for the ready status after commands.
+ * @mtd: MTD device structure
+ * @timeo: Timeout in ms
+ *
+ * Wait for status ready (i.e. command done) or timeout.
+ */
+static void nand_wait_status_ready(struct mtd_info *mtd, unsigned long timeo)
+{
+ register struct nand_chip *chip = mtd->priv;
+
+ timeo = jiffies + msecs_to_jiffies(timeo);
+ do {
+ if ((chip->read_byte(mtd) & NAND_STATUS_READY))
+ break;
+ touch_softlockup_watchdog();
+ } while (time_before(jiffies, timeo));
+};
+
+/**
* nand_command - [DEFAULT] Send command to NAND device
* @mtd: MTD device structure
* @command: the command to be sent
@@ -643,8 +662,8 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
NAND_CTRL_CLE | NAND_CTRL_CHANGE);
chip->cmd_ctrl(mtd,
NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
- while (!(chip->read_byte(mtd) & NAND_STATUS_READY))
- ;
+ /* EZ-NAND can take upto 250ms as per ONFi v4.0 */
+ nand_wait_status_ready(mtd, 250);
return;
/* This applies to read commands */
@@ -740,8 +759,8 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
chip->cmd_ctrl(mtd, NAND_CMD_NONE,
NAND_NCE | NAND_CTRL_CHANGE);
- while (!(chip->read_byte(mtd) & NAND_STATUS_READY))
- ;
+ /* EZ-NAND can take upto 250ms as per ONFi v4.0 */
+ nand_wait_status_ready(mtd, 250);
return;
case NAND_CMD_RNDOUT:
@@ -968,7 +987,7 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
__func__, (unsigned long long)ofs, len);
if (check_offs_len(mtd, ofs, len))
- ret = -EINVAL;
+ return -EINVAL;
/* Align to last block address if size addresses end of the device */
if (ofs + len == mtd->size)
@@ -1031,7 +1050,7 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
__func__, (unsigned long long)ofs, len);
if (check_offs_len(mtd, ofs, len))
- ret = -EINVAL;
+ return -EINVAL;
nand_get_device(mtd, FL_LOCKING);
@@ -1716,9 +1735,9 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
int ret;
nand_get_device(mtd, FL_READING);
+ memset(&ops, 0, sizeof(ops));
ops.len = len;
ops.datbuf = buf;
- ops.oobbuf = NULL;
ops.mode = MTD_OPS_PLACE_OOB;
ret = nand_do_read_ops(mtd, from, &ops);
*retlen = ops.retlen;
@@ -2124,7 +2143,7 @@ static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
/**
- * nand_write_subpage_hwecc - [REPLACABLE] hardware ECC based subpage write
+ * nand_write_subpage_hwecc - [REPLACEABLE] hardware ECC based subpage write
* @mtd: mtd info structure
* @chip: nand chip info structure
* @offset: column address of subpage within the page
@@ -2508,9 +2527,9 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
/* Grab the device */
panic_nand_get_device(chip, mtd, FL_WRITING);
+ memset(&ops, 0, sizeof(ops));
ops.len = len;
ops.datbuf = (uint8_t *)buf;
- ops.oobbuf = NULL;
ops.mode = MTD_OPS_PLACE_OOB;
ret = nand_do_write_ops(mtd, to, &ops);
@@ -2536,9 +2555,9 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
int ret;
nand_get_device(mtd, FL_WRITING);
+ memset(&ops, 0, sizeof(ops));
ops.len = len;
ops.datbuf = (uint8_t *)buf;
- ops.oobbuf = NULL;
ops.mode = MTD_OPS_PLACE_OOB;
ret = nand_do_write_ops(mtd, to, &ops);
*retlen = ops.retlen;