summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r--drivers/mtd/nand/Kconfig30
-rw-r--r--drivers/mtd/nand/Makefile2
-rw-r--r--drivers/mtd/nand/ams-delta.c8
-rw-r--r--drivers/mtd/nand/atmel_nand.c2
-rw-r--r--drivers/mtd/nand/cafe_nand.c6
-rw-r--r--drivers/mtd/nand/cmx270_nand.c4
-rw-r--r--drivers/mtd/nand/davinci_nand.c45
-rw-r--r--drivers/mtd/nand/fsl_elbc_nand.c3
-rw-r--r--drivers/mtd/nand/mxc_nand.c16
-rw-r--r--drivers/mtd/nand/nand_base.c167
-rw-r--r--drivers/mtd/nand/nand_ecc.c31
-rw-r--r--drivers/mtd/nand/ndfc.c4
-rw-r--r--drivers/mtd/nand/nomadik_nand.c250
-rw-r--r--drivers/mtd/nand/omap2.c347
-rw-r--r--drivers/mtd/nand/orion_nand.c3
-rw-r--r--drivers/mtd/nand/pxa3xx_nand.c17
-rw-r--r--drivers/mtd/nand/sh_flctl.c5
-rw-r--r--drivers/mtd/nand/tmio_nand.c17
-rw-r--r--drivers/mtd/nand/txx9ndfmc.c52
-rw-r--r--drivers/mtd/nand/w90p910_nand.c382
20 files changed, 1285 insertions, 106 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index ce96c091f01b..2fda0b615246 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -80,6 +80,23 @@ config MTD_NAND_OMAP2
help
Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
+config MTD_NAND_OMAP_PREFETCH
+ bool "GPMC prefetch support for NAND Flash device"
+ depends on MTD_NAND && MTD_NAND_OMAP2
+ default y
+ help
+ The NAND device can be accessed for Read/Write using GPMC PREFETCH engine
+ to improve the performance.
+
+config MTD_NAND_OMAP_PREFETCH_DMA
+ depends on MTD_NAND_OMAP_PREFETCH
+ bool "DMA mode"
+ default n
+ help
+ The GPMC PREFETCH engine can be configured eigther in MPU interrupt mode
+ or in DMA interrupt mode.
+ Say y for DMA mode or MPU mode will be used
+
config MTD_NAND_TS7250
tristate "NAND Flash device on TS-7250 board"
depends on MACH_TS72XX
@@ -426,6 +443,12 @@ config MTD_NAND_MXC
This enables the driver for the NAND flash controller on the
MXC processors.
+config MTD_NAND_NOMADIK
+ tristate "ST Nomadik 8815 NAND support"
+ depends on ARCH_NOMADIK
+ help
+ Driver for the NAND flash controller on the Nomadik, with ECC.
+
config MTD_NAND_SH_FLCTL
tristate "Support for NAND on Renesas SuperH FLCTL"
depends on MTD_NAND && SUPERH && CPU_SUBTYPE_SH7723
@@ -452,4 +475,11 @@ config MTD_NAND_SOCRATES
help
Enables support for NAND Flash chips wired onto Socrates board.
+config MTD_NAND_W90P910
+ tristate "Support for NAND on w90p910 evaluation board."
+ depends on ARCH_W90X900 && MTD_PARTITIONS
+ help
+ This enables the driver for the NAND Flash on evaluation board based
+ on w90p910.
+
endif # MTD_NAND
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index f3a786b3cff3..6950d3dabf10 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -40,5 +40,7 @@ obj-$(CONFIG_MTD_NAND_SH_FLCTL) += sh_flctl.o
obj-$(CONFIG_MTD_NAND_MXC) += mxc_nand.o
obj-$(CONFIG_MTD_NAND_SOCRATES) += socrates_nand.o
obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o
+obj-$(CONFIG_MTD_NAND_W90P910) += w90p910_nand.o
+obj-$(CONFIG_MTD_NAND_NOMADIK) += nomadik_nand.o
nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index 782994ead0e8..005b91f096f2 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -63,7 +63,7 @@ static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte)
{
struct nand_chip *this = mtd->priv;
- omap_writew(0, (OMAP_MPUIO_BASE + OMAP_MPUIO_IO_CNTL));
+ omap_writew(0, (OMAP1_MPUIO_BASE + OMAP_MPUIO_IO_CNTL));
omap_writew(byte, this->IO_ADDR_W);
ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NWE, 0);
ndelay(40);
@@ -78,7 +78,7 @@ static u_char ams_delta_read_byte(struct mtd_info *mtd)
ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NRE, 0);
ndelay(40);
- omap_writew(~0, (OMAP_MPUIO_BASE + OMAP_MPUIO_IO_CNTL));
+ omap_writew(~0, (OMAP1_MPUIO_BASE + OMAP_MPUIO_IO_CNTL));
res = omap_readw(this->IO_ADDR_R);
ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NRE,
AMS_DELTA_LATCH2_NAND_NRE);
@@ -178,8 +178,8 @@ static int __init ams_delta_init(void)
ams_delta_mtd->priv = this;
/* Set address of NAND IO lines */
- this->IO_ADDR_R = (OMAP_MPUIO_BASE + OMAP_MPUIO_INPUT_LATCH);
- this->IO_ADDR_W = (OMAP_MPUIO_BASE + OMAP_MPUIO_OUTPUT);
+ this->IO_ADDR_R = (OMAP1_MPUIO_BASE + OMAP_MPUIO_INPUT_LATCH);
+ this->IO_ADDR_W = (OMAP1_MPUIO_BASE + OMAP_MPUIO_OUTPUT);
this->read_byte = ams_delta_read_byte;
this->write_buf = ams_delta_write_buf;
this->read_buf = ams_delta_read_buf;
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 20c828ba9405..f8e9975c86e5 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -218,7 +218,7 @@ static int atmel_nand_calculate(struct mtd_info *mtd,
* buf: buffer to store read data
*/
static int atmel_nand_read_page(struct mtd_info *mtd,
- struct nand_chip *chip, uint8_t *buf)
+ struct nand_chip *chip, uint8_t *buf, int page)
{
int eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index 29acd06b1c39..c828d9ac7bd7 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -381,7 +381,7 @@ static int cafe_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
* we need a special oob layout and handling.
*/
static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf)
+ uint8_t *buf, int page)
{
struct cafe_priv *cafe = mtd->priv;
@@ -903,12 +903,12 @@ static struct pci_driver cafe_nand_pci_driver = {
.resume = cafe_nand_resume,
};
-static int cafe_nand_init(void)
+static int __init cafe_nand_init(void)
{
return pci_register_driver(&cafe_nand_pci_driver);
}
-static void cafe_nand_exit(void)
+static void __exit cafe_nand_exit(void)
{
pci_unregister_driver(&cafe_nand_pci_driver);
}
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index 10081e656a6f..826cacffcefc 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -147,7 +147,7 @@ static int cmx270_device_ready(struct mtd_info *mtd)
/*
* Main initialization routine
*/
-static int cmx270_init(void)
+static int __init cmx270_init(void)
{
struct nand_chip *this;
const char *part_type;
@@ -261,7 +261,7 @@ module_init(cmx270_init);
/*
* Clean up routine
*/
-static void cmx270_cleanup(void)
+static void __exit cmx270_cleanup(void)
{
/* Release resources, unregister device */
nand_release(cmx270_nand_mtd);
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 0fad6487e6f4..f13f5b9afaf7 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -348,6 +348,12 @@ compare:
if (!(syndrome[0] | syndrome[1] | syndrome[2] | syndrome[3]))
return 0;
+ /*
+ * Clear any previous address calculation by doing a dummy read of an
+ * error address register.
+ */
+ davinci_nand_readl(info, NAND_ERR_ADD1_OFFSET);
+
/* Start address calculation, and wait for it to complete.
* We _could_ start reading more data while this is working,
* to speed up the overall page read.
@@ -359,8 +365,10 @@ compare:
switch ((fsr >> 8) & 0x0f) {
case 0: /* no error, should not happen */
+ davinci_nand_readl(info, NAND_ERR_ERRVAL1_OFFSET);
return 0;
case 1: /* five or more errors detected */
+ davinci_nand_readl(info, NAND_ERR_ERRVAL1_OFFSET);
return -EIO;
case 2: /* error addresses computed */
case 3:
@@ -500,6 +508,26 @@ static struct nand_ecclayout hwecc4_small __initconst = {
},
};
+/* An ECC layout for using 4-bit ECC with large-page (2048bytes) flash,
+ * storing ten ECC bytes plus the manufacturer's bad block marker byte,
+ * and not overlapping the default BBT markers.
+ */
+static struct nand_ecclayout hwecc4_2048 __initconst = {
+ .eccbytes = 40,
+ .eccpos = {
+ /* at the end of spare sector */
+ 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,
+ 34, 35, 36, 37, 38, 39, 40, 41, 42, 43,
+ 44, 45, 46, 47, 48, 49, 50, 51, 52, 53,
+ 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
+ },
+ .oobfree = {
+ /* 2 bytes at offset 0 hold manufacturer badblock markers */
+ {.offset = 2, .length = 22, },
+ /* 5 bytes at offset 8 hold BBT markers */
+ /* 8 bytes at offset 16 hold JFFS2 clean markers */
+ },
+};
static int __init nand_davinci_probe(struct platform_device *pdev)
{
@@ -690,15 +718,20 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
info->mtd.oobsize - 16;
goto syndrome_done;
}
+ if (chunks == 4) {
+ info->ecclayout = hwecc4_2048;
+ info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST;
+ goto syndrome_done;
+ }
- /* For large page chips we'll be wanting to use a
- * not-yet-implemented mode that reads OOB data
- * before reading the body of the page, to avoid
- * the "infix OOB" model of NAND_ECC_HW_SYNDROME
- * (and preserve manufacturer badblock markings).
+ /* 4KiB page chips are not yet supported. The eccpos from
+ * nand_ecclayout cannot hold 80 bytes and change to eccpos[]
+ * breaks userspace ioctl interface with mtd-utils. Once we
+ * resolve this issue, NAND_ECC_HW_OOB_FIRST mode can be used
+ * for the 4KiB page chips.
*/
dev_warn(&pdev->dev, "no 4-bit ECC support yet "
- "for large page NAND\n");
+ "for 4KiB-page NAND\n");
ret = -EIO;
goto err_scan;
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 1f6eb2578717..ddd37d2554ed 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -739,7 +739,8 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
static int fsl_elbc_read_page(struct mtd_info *mtd,
struct nand_chip *chip,
- uint8_t *buf)
+ uint8_t *buf,
+ int page)
{
fsl_elbc_read_buf(mtd, buf, mtd->writesize);
fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 76beea40d2cf..65b26d5a5c0d 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -857,6 +857,17 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
}
}
+/* Define some generic bad / good block scan pattern which are used
+ * while scanning a device for factory marked good / bad blocks. */
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr smallpage_memorybased = {
+ .options = NAND_BBT_SCAN2NDPAGE,
+ .offs = 5,
+ .len = 1,
+ .pattern = scan_ff_pattern
+};
+
static int __init mxcnd_probe(struct platform_device *pdev)
{
struct nand_chip *this;
@@ -973,7 +984,10 @@ static int __init mxcnd_probe(struct platform_device *pdev)
goto escan;
}
- host->pagesize_2k = (mtd->writesize == 2048) ? 1 : 0;
+ if (mtd->writesize == 2048) {
+ host->pagesize_2k = 1;
+ this->badblock_pattern = &smallpage_memorybased;
+ }
if (this->ecc.mode == NAND_ECC_HW) {
switch (mtd->oobsize) {
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 8c21b89d2d0c..22113865438b 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -688,8 +688,7 @@ nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
retry:
spin_lock(lock);
- /* Hardware controller shared among independend devices */
- /* Hardware controller shared among independend devices */
+ /* Hardware controller shared among independent devices */
if (!chip->controller->active)
chip->controller->active = chip;
@@ -766,7 +765,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
* Not for syndrome calculating ecc controllers, which use a special oob layout
*/
static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf)
+ uint8_t *buf, int page)
{
chip->read_buf(mtd, buf, mtd->writesize);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -782,7 +781,7 @@ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
* We need a special oob layout and handling even when OOB isn't used.
*/
static int nand_read_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf)
+ uint8_t *buf, int page)
{
int eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -821,7 +820,7 @@ static int nand_read_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *c
* @buf: buffer to store read data
*/
static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf)
+ uint8_t *buf, int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -831,7 +830,7 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *ecc_code = chip->buffers->ecccode;
uint32_t *eccpos = chip->ecc.layout->eccpos;
- chip->ecc.read_page_raw(mtd, chip, buf);
+ chip->ecc.read_page_raw(mtd, chip, buf, page);
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
@@ -944,7 +943,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint3
* Not for syndrome calculating ecc controllers which need a special oob layout
*/
static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf)
+ uint8_t *buf, int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -980,6 +979,54 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
+ * nand_read_page_hwecc_oob_first - [REPLACABLE] hw ecc, read oob first
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ *
+ * Hardware ECC for large page chips, require OOB to be read first.
+ * For this ECC mode, the write_page method is re-used from ECC_HW.
+ * These methods read/write ECC from the OOB area, unlike the
+ * ECC_HW_SYNDROME support with multiple ECC steps, follows the
+ * "infix ECC" scheme and reads/writes ECC from the data area, by
+ * overwriting the NAND manufacturer bad block markings.
+ */
+static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
+ struct nand_chip *chip, uint8_t *buf, int page)
+{
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *p = buf;
+ uint8_t *ecc_code = chip->buffers->ecccode;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+
+ /* Read the OOB area first */
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+ for (i = 0; i < chip->ecc.total; i++)
+ ecc_code[i] = chip->oob_poi[eccpos[i]];
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ int stat;
+
+ chip->ecc.hwctl(mtd, NAND_ECC_READ);
+ chip->read_buf(mtd, p, eccsize);
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+
+ stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL);
+ if (stat < 0)
+ mtd->ecc_stats.failed++;
+ else
+ mtd->ecc_stats.corrected += stat;
+ }
+ return 0;
+}
+
+/**
* nand_read_page_syndrome - [REPLACABLE] hardware ecc syndrom based page read
* @mtd: mtd info structure
* @chip: nand chip info structure
@@ -989,7 +1036,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
* we need a special oob layout and handling.
*/
static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf)
+ uint8_t *buf, int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -1131,11 +1178,13 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
/* Now read the page into the buffer */
if (unlikely(ops->mode == MTD_OOB_RAW))
- ret = chip->ecc.read_page_raw(mtd, chip, bufpoi);
+ ret = chip->ecc.read_page_raw(mtd, chip,
+ bufpoi, page);
else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi);
else
- ret = chip->ecc.read_page(mtd, chip, bufpoi);
+ ret = chip->ecc.read_page(mtd, chip, bufpoi,
+ page);
if (ret < 0)
break;
@@ -1413,8 +1462,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
int len;
uint8_t *buf = ops->oobbuf;
- DEBUG(MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08Lx, len = %i\n",
- (unsigned long long)from, readlen);
+ DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08Lx, len = %i\n",
+ __func__, (unsigned long long)from, readlen);
if (ops->mode == MTD_OOB_AUTO)
len = chip->ecc.layout->oobavail;
@@ -1422,8 +1471,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
len = mtd->oobsize;
if (unlikely(ops->ooboffs >= len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
- "Attempt to start read outside oob\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start read "
+ "outside oob\n", __func__);
return -EINVAL;
}
@@ -1431,8 +1480,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
if (unlikely(from >= mtd->size ||
ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) -
(from >> chip->page_shift)) * len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
- "Attempt read beyond end of device\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read beyond end "
+ "of device\n", __func__);
return -EINVAL;
}
@@ -1506,8 +1555,8 @@ static int nand_read_oob(struct mtd_info *mtd, loff_t from,
/* Do not allow reads past end of device */
if (ops->datbuf && (from + ops->len) > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
- "Attempt read beyond end of device\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read "
+ "beyond end of device\n", __func__);
return -EINVAL;
}
@@ -1816,8 +1865,8 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
/* reject writes, which are not page aligned */
if (NOTALIGNED(to) || NOTALIGNED(ops->len)) {
- printk(KERN_NOTICE "nand_write: "
- "Attempt to write not page aligned data\n");
+ printk(KERN_NOTICE "%s: Attempt to write not "
+ "page aligned data\n", __func__);
return -EINVAL;
}
@@ -1944,8 +1993,8 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
int chipnr, page, status, len;
struct nand_chip *chip = mtd->priv;
- DEBUG(MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n",
- (unsigned int)to, (int)ops->ooblen);
+ DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
+ __func__, (unsigned int)to, (int)ops->ooblen);
if (ops->mode == MTD_OOB_AUTO)
len = chip->ecc.layout->oobavail;
@@ -1954,14 +2003,14 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
/* Do not allow write past end of page */
if ((ops->ooboffs + ops->ooblen) > len) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: "
- "Attempt to write past end of page\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to write "
+ "past end of page\n", __func__);
return -EINVAL;
}
if (unlikely(ops->ooboffs >= len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_do_write_oob: "
- "Attempt to start write outside oob\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start "
+ "write outside oob\n", __func__);
return -EINVAL;
}
@@ -1970,8 +2019,8 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
ops->ooboffs + ops->ooblen >
((mtd->size >> chip->page_shift) -
(to >> chip->page_shift)) * len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_do_write_oob: "
- "Attempt write beyond end of device\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond "
+ "end of device\n", __func__);
return -EINVAL;
}
@@ -2026,8 +2075,8 @@ static int nand_write_oob(struct mtd_info *mtd, loff_t to,
/* Do not allow writes past end of device */
if (ops->datbuf && (to + ops->len) > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: "
- "Attempt write beyond end of device\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond "
+ "end of device\n", __func__);
return -EINVAL;
}
@@ -2117,26 +2166,27 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
unsigned int bbt_masked_page = 0xffffffff;
loff_t len;
- DEBUG(MTD_DEBUG_LEVEL3, "nand_erase: start = 0x%012llx, len = %llu\n",
- (unsigned long long)instr->addr, (unsigned long long)instr->len);
+ DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
+ __func__, (unsigned long long)instr->addr,
+ (unsigned long long)instr->len);
/* Start address must align on block boundary */
if (instr->addr & ((1 << chip->phys_erase_shift) - 1)) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Unaligned address\n", __func__);
return -EINVAL;
}
/* Length must align on block boundary */
if (instr->len & ((1 << chip->phys_erase_shift) - 1)) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: "
- "Length not block aligned\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Length not block aligned\n",
+ __func__);
return -EINVAL;
}
/* Do not allow erase past end of device */
if ((instr->len + instr->addr) > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: "
- "Erase past end of device\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Erase past end of device\n",
+ __func__);
return -EINVAL;
}
@@ -2157,8 +2207,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
/* Check, if it is write protected */
if (nand_check_wp(mtd)) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: "
- "Device is write protected!!!\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
+ __func__);
instr->state = MTD_ERASE_FAILED;
goto erase_exit;
}
@@ -2183,8 +2233,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
*/
if (nand_block_checkbad(mtd, ((loff_t) page) <<
chip->page_shift, 0, allowbbt)) {
- printk(KERN_WARNING "nand_erase: attempt to erase a "
- "bad block at page 0x%08x\n", page);
+ printk(KERN_WARNING "%s: attempt to erase a bad block "
+ "at page 0x%08x\n", __func__, page);
instr->state = MTD_ERASE_FAILED;
goto erase_exit;
}
@@ -2211,8 +2261,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
/* See if block erase succeeded */
if (status & NAND_STATUS_FAIL) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: "
- "Failed erase, page 0x%08x\n", page);
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Failed erase, "
+ "page 0x%08x\n", __func__, page);
instr->state = MTD_ERASE_FAILED;
instr->fail_addr =
((loff_t)page << chip->page_shift);
@@ -2272,9 +2322,9 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
if (!rewrite_bbt[chipnr])
continue;
/* update the BBT for chip */
- DEBUG(MTD_DEBUG_LEVEL0, "nand_erase_nand: nand_update_bbt "
- "(%d:0x%0llx 0x%0x)\n", chipnr, rewrite_bbt[chipnr],
- chip->bbt_td->pages[chipnr]);
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: nand_update_bbt "
+ "(%d:0x%0llx 0x%0x)\n", __func__, chipnr,
+ rewrite_bbt[chipnr], chip->bbt_td->pages[chipnr]);
nand_update_bbt(mtd, rewrite_bbt[chipnr]);
}
@@ -2292,7 +2342,7 @@ static void nand_sync(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
- DEBUG(MTD_DEBUG_LEVEL3, "nand_sync: called\n");
+ DEBUG(MTD_DEBUG_LEVEL3, "%s: called\n", __func__);
/* Grab the lock and see if the device is available */
nand_get_device(chip, mtd, FL_SYNCING);
@@ -2356,8 +2406,8 @@ static void nand_resume(struct mtd_info *mtd)
if (chip->state == FL_PM_SUSPENDED)
nand_release_device(mtd);
else
- printk(KERN_ERR "nand_resume() called for a chip which is not "
- "in suspended state\n");
+ printk(KERN_ERR "%s called for a chip which is not "
+ "in suspended state\n", __func__);
}
/*
@@ -2671,6 +2721,17 @@ int nand_scan_tail(struct mtd_info *mtd)
*/
switch (chip->ecc.mode) {
+ case NAND_ECC_HW_OOB_FIRST:
+ /* Similar to NAND_ECC_HW, but a separate read_page handle */
+ if (!chip->ecc.calculate || !chip->ecc.correct ||
+ !chip->ecc.hwctl) {
+ printk(KERN_WARNING "No ECC functions supplied; "
+ "Hardware ECC not possible\n");
+ BUG();
+ }
+ if (!chip->ecc.read_page)
+ chip->ecc.read_page = nand_read_page_hwecc_oob_first;
+
case NAND_ECC_HW:
/* Use standard hwecc read page function ? */
if (!chip->ecc.read_page)
@@ -2693,7 +2754,7 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->ecc.read_page == nand_read_page_hwecc ||
!chip->ecc.write_page ||
chip->ecc.write_page == nand_write_page_hwecc)) {
- printk(KERN_WARNING "No ECC functions supplied, "
+ printk(KERN_WARNING "No ECC functions supplied; "
"Hardware ECC not possible\n");
BUG();
}
@@ -2728,7 +2789,8 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->ecc.write_page_raw = nand_write_page_raw;
chip->ecc.read_oob = nand_read_oob_std;
chip->ecc.write_oob = nand_write_oob_std;
- chip->ecc.size = 256;
+ if (!chip->ecc.size)
+ chip->ecc.size = 256;
chip->ecc.bytes = 3;
break;
@@ -2858,7 +2920,8 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
/* Many callers got this wrong, so check for it for a while... */
if (!mtd->owner && caller_is_module()) {
- printk(KERN_CRIT "nand_scan() called with NULL mtd->owner!\n");
+ printk(KERN_CRIT "%s called with NULL mtd->owner!\n",
+ __func__);
BUG();
}
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index c0cb87d6d16e..db7ae9d6a296 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -417,22 +417,22 @@ int nand_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf,
EXPORT_SYMBOL(nand_calculate_ecc);
/**
- * nand_correct_data - [NAND Interface] Detect and correct bit error(s)
- * @mtd: MTD block structure
+ * __nand_correct_data - [NAND Interface] Detect and correct bit error(s)
* @buf: raw data read from the chip
* @read_ecc: ECC from the chip
* @calc_ecc: the ECC calculated from raw data
+ * @eccsize: data bytes per ecc step (256 or 512)
*
- * Detect and correct a 1 bit error for 256/512 byte block
+ * Detect and correct a 1 bit error for eccsize byte block
*/
-int nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
- unsigned char *read_ecc, unsigned char *calc_ecc)
+int __nand_correct_data(unsigned char *buf,
+ unsigned char *read_ecc, unsigned char *calc_ecc,
+ unsigned int eccsize)
{
unsigned char b0, b1, b2, bit_addr;
unsigned int byte_addr;
/* 256 or 512 bytes/ecc */
- const uint32_t eccsize_mult =
- (((struct nand_chip *)mtd->priv)->ecc.size) >> 8;
+ const uint32_t eccsize_mult = eccsize >> 8;
/*
* b0 to b2 indicate which bit is faulty (if any)
@@ -495,6 +495,23 @@ int nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
printk(KERN_ERR "uncorrectable error : ");
return -1;
}
+EXPORT_SYMBOL(__nand_correct_data);
+
+/**
+ * nand_correct_data - [NAND Interface] Detect and correct bit error(s)
+ * @mtd: MTD block structure
+ * @buf: raw data read from the chip
+ * @read_ecc: ECC from the chip
+ * @calc_ecc: the ECC calculated from raw data
+ *
+ * Detect and correct a 1 bit error for 256/512 byte block
+ */
+int nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
+ unsigned char *read_ecc, unsigned char *calc_ecc)
+{
+ return __nand_correct_data(buf, read_ecc, calc_ecc,
+ ((struct nand_chip *)mtd->priv)->ecc.size);
+}
EXPORT_SYMBOL(nand_correct_data);
MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index 89bf85af642c..40b5658bdbe6 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -102,8 +102,8 @@ static int ndfc_calculate_ecc(struct mtd_info *mtd,
wmb();
ecc = in_be32(ndfc->ndfcbase + NDFC_ECC);
/* The NDFC uses Smart Media (SMC) bytes order */
- ecc_code[0] = p[2];
- ecc_code[1] = p[1];
+ ecc_code[0] = p[1];
+ ecc_code[1] = p[2];
ecc_code[2] = p[3];
return 0;
diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c
new file mode 100644
index 000000000000..7c302d55910e
--- /dev/null
+++ b/drivers/mtd/nand/nomadik_nand.c
@@ -0,0 +1,250 @@
+/*
+ * drivers/mtd/nand/nomadik_nand.c
+ *
+ * Overview:
+ * Driver for on-board NAND flash on Nomadik Platforms
+ *
+ * Copyright © 2007 STMicroelectronics Pvt. Ltd.
+ * Author: Sachin Verma <sachin.verma@st.com>
+ *
+ * Copyright © 2009 Alessandro Rubini
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+#include <mach/nand.h>
+#include <mach/fsmc.h>
+
+#include <mtd/mtd-abi.h>
+
+struct nomadik_nand_host {
+ struct mtd_info mtd;
+ struct nand_chip nand;
+ void __iomem *data_va;
+ void __iomem *cmd_va;
+ void __iomem *addr_va;
+ struct nand_bbt_descr *bbt_desc;
+};
+
+static struct nand_ecclayout nomadik_ecc_layout = {
+ .eccbytes = 3 * 4,
+ .eccpos = { /* each subpage has 16 bytes: pos 2,3,4 hosts ECC */
+ 0x02, 0x03, 0x04,
+ 0x12, 0x13, 0x14,
+ 0x22, 0x23, 0x24,
+ 0x32, 0x33, 0x34},
+ /* let's keep bytes 5,6,7 for us, just in case we change ECC algo */
+ .oobfree = { {0x08, 0x08}, {0x18, 0x08}, {0x28, 0x08}, {0x38, 0x08} },
+};
+
+static void nomadik_ecc_control(struct mtd_info *mtd, int mode)
+{
+ /* No need to enable hw ecc, it's on by default */
+}
+
+static void nomadik_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct nomadik_nand_host *host = nand->priv;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ writeb(cmd, host->cmd_va);
+ else
+ writeb(cmd, host->addr_va);
+}
+
+static int nomadik_nand_probe(struct platform_device *pdev)
+{
+ struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data;
+ struct nomadik_nand_host *host;
+ struct mtd_info *mtd;
+ struct nand_chip *nand;
+ struct resource *res;
+ int ret = 0;
+
+ /* Allocate memory for the device structure (and zero it) */
+ host = kzalloc(sizeof(struct nomadik_nand_host), GFP_KERNEL);
+ if (!host) {
+ dev_err(&pdev->dev, "Failed to allocate device structure.\n");
+ return -ENOMEM;
+ }
+
+ /* Call the client's init function, if any */
+ if (pdata->init)
+ ret = pdata->init();
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Init function failed\n");
+ goto err;
+ }
+
+ /* ioremap three regions */
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_addr");
+ if (!res) {
+ ret = -EIO;
+ goto err_unmap;
+ }
+ host->addr_va = ioremap(res->start, res->end - res->start + 1);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
+ if (!res) {
+ ret = -EIO;
+ goto err_unmap;
+ }
+ host->data_va = ioremap(res->start, res->end - res->start + 1);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_cmd");
+ if (!res) {
+ ret = -EIO;
+ goto err_unmap;
+ }
+ host->cmd_va = ioremap(res->start, res->end - res->start + 1);
+
+ if (!host->addr_va || !host->data_va || !host->cmd_va) {
+ ret = -ENOMEM;
+ goto err_unmap;
+ }
+
+ /* Link all private pointers */
+ mtd = &host->mtd;
+ nand = &host->nand;
+ mtd->priv = nand;
+ nand->priv = host;
+
+ host->mtd.owner = THIS_MODULE;
+ nand->IO_ADDR_R = host->data_va;
+ nand->IO_ADDR_W = host->data_va;
+ nand->cmd_ctrl = nomadik_cmd_ctrl;
+
+ /*
+ * This stanza declares ECC_HW but uses soft routines. It's because
+ * HW claims to make the calculation but not the correction. However,
+ * I haven't managed to get the desired data out of it until now.
+ */
+ nand->ecc.mode = NAND_ECC_SOFT;
+ nand->ecc.layout = &nomadik_ecc_layout;
+ nand->ecc.hwctl = nomadik_ecc_control;
+ nand->ecc.size = 512;
+ nand->ecc.bytes = 3;
+
+ nand->options = pdata->options;
+
+ /*
+ * Scan to find existance of the device
+ */
+ if (nand_scan(&host->mtd, 1)) {
+ ret = -ENXIO;
+ goto err_unmap;
+ }
+
+#ifdef CONFIG_MTD_PARTITIONS
+ add_mtd_partitions(&host->mtd, pdata->parts, pdata->nparts);
+#else
+ pr_info("Registering %s as whole device\n", mtd->name);
+ add_mtd_device(mtd);
+#endif
+
+ platform_set_drvdata(pdev, host);
+ return 0;
+
+ err_unmap:
+ if (host->cmd_va)
+ iounmap(host->cmd_va);
+ if (host->data_va)
+ iounmap(host->data_va);
+ if (host->addr_va)
+ iounmap(host->addr_va);
+ err:
+ kfree(host);
+ return ret;
+}
+
+/*
+ * Clean up routine
+ */
+static int nomadik_nand_remove(struct platform_device *pdev)
+{
+ struct nomadik_nand_host *host = platform_get_drvdata(pdev);
+ struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data;
+
+ if (pdata->exit)
+ pdata->exit();
+
+ if (host) {
+ iounmap(host->cmd_va);
+ iounmap(host->data_va);
+ iounmap(host->addr_va);
+ kfree(host);
+ }
+ return 0;
+}
+
+static int nomadik_nand_suspend(struct device *dev)
+{
+ struct nomadik_nand_host *host = dev_get_drvdata(dev);
+ int ret = 0;
+ if (host)
+ ret = host->mtd.suspend(&host->mtd);
+ return ret;
+}
+
+static int nomadik_nand_resume(struct device *dev)
+{
+ struct nomadik_nand_host *host = dev_get_drvdata(dev);
+ if (host)
+ host->mtd.resume(&host->mtd);
+ return 0;
+}
+
+static struct dev_pm_ops nomadik_nand_pm_ops = {
+ .suspend = nomadik_nand_suspend,
+ .resume = nomadik_nand_resume,
+};
+
+static struct platform_driver nomadik_nand_driver = {
+ .probe = nomadik_nand_probe,
+ .remove = nomadik_nand_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "nomadik_nand",
+ .pm = &nomadik_nand_pm_ops,
+ },
+};
+
+static int __init nand_nomadik_init(void)
+{
+ pr_info("Nomadik NAND driver\n");
+ return platform_driver_register(&nomadik_nand_driver);
+}
+
+static void __exit nand_nomadik_exit(void)
+{
+ platform_driver_unregister(&nomadik_nand_driver);
+}
+
+module_init(nand_nomadik_init);
+module_exit(nand_nomadik_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("ST Microelectronics (sachin.verma@st.com)");
+MODULE_DESCRIPTION("NAND driver for Nomadik Platform");
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index ebd07e95b814..090ab87086b5 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -18,8 +18,7 @@
#include <linux/mtd/partitions.h>
#include <linux/io.h>
-#include <asm/dma.h>
-
+#include <mach/dma.h>
#include <mach/gpmc.h>
#include <mach/nand.h>
@@ -112,6 +111,27 @@
static const char *part_probes[] = { "cmdlinepart", NULL };
#endif
+#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH
+static int use_prefetch = 1;
+
+/* "modprobe ... use_prefetch=0" etc */
+module_param(use_prefetch, bool, 0);
+MODULE_PARM_DESC(use_prefetch, "enable/disable use of PREFETCH");
+
+#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH_DMA
+static int use_dma = 1;
+
+/* "modprobe ... use_dma=0" etc */
+module_param(use_dma, bool, 0);
+MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
+#else
+const int use_dma;
+#endif
+#else
+const int use_prefetch;
+const int use_dma;
+#endif
+
struct omap_nand_info {
struct nand_hw_control controller;
struct omap_nand_platform_data *pdata;
@@ -124,6 +144,9 @@ struct omap_nand_info {
unsigned long phys_base;
void __iomem *gpmc_cs_baseaddr;
void __iomem *gpmc_baseaddr;
+ void __iomem *nand_pref_fifo_add;
+ struct completion comp;
+ int dma_ch;
};
/**
@@ -189,6 +212,38 @@ static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
}
/**
+ * omap_read_buf8 - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf8(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct nand_chip *nand = mtd->priv;
+
+ ioread8_rep(nand->IO_ADDR_R, buf, len);
+}
+
+/**
+ * omap_write_buf8 - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ struct omap_nand_info *info = container_of(mtd,
+ struct omap_nand_info, mtd);
+ u_char *p = (u_char *)buf;
+
+ while (len--) {
+ iowrite8(*p++, info->nand.IO_ADDR_W);
+ while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr +
+ GPMC_STATUS) & GPMC_BUF_FULL));
+ }
+}
+
+/**
* omap_read_buf16 - read data from NAND controller into buffer
* @mtd: MTD device structure
* @buf: buffer to store date
@@ -198,7 +253,7 @@ static void omap_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
{
struct nand_chip *nand = mtd->priv;
- __raw_readsw(nand->IO_ADDR_R, buf, len / 2);
+ ioread16_rep(nand->IO_ADDR_R, buf, len / 2);
}
/**
@@ -217,13 +272,242 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
len >>= 1;
while (len--) {
- writew(*p++, info->nand.IO_ADDR_W);
+ iowrite16(*p++, info->nand.IO_ADDR_W);
while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr +
GPMC_STATUS) & GPMC_BUF_FULL))
;
}
}
+
+/**
+ * omap_read_buf_pref - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct omap_nand_info *info = container_of(mtd,
+ struct omap_nand_info, mtd);
+ uint32_t pfpw_status = 0, r_count = 0;
+ int ret = 0;
+ u32 *p = (u32 *)buf;
+
+ /* take care of subpage reads */
+ for (; len % 4 != 0; ) {
+ *buf++ = __raw_readb(info->nand.IO_ADDR_R);
+ len--;
+ }
+ p = (u32 *) buf;
+
+ /* configure and start prefetch transfer */
+ ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0);
+ if (ret) {
+ /* PFPW engine is busy, use cpu copy method */
+ if (info->nand.options & NAND_BUSWIDTH_16)
+ omap_read_buf16(mtd, buf, len);
+ else
+ omap_read_buf8(mtd, buf, len);
+ } else {
+ do {
+ pfpw_status = gpmc_prefetch_status();
+ r_count = ((pfpw_status >> 24) & 0x7F) >> 2;
+ ioread32_rep(info->nand_pref_fifo_add, p, r_count);
+ p += r_count;
+ len -= r_count << 2;
+ } while (len);
+
+ /* disable and stop the PFPW engine */
+ gpmc_prefetch_reset();
+ }
+}
+
+/**
+ * omap_write_buf_pref - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf_pref(struct mtd_info *mtd,
+ const u_char *buf, int len)
+{
+ struct omap_nand_info *info = container_of(mtd,
+ struct omap_nand_info, mtd);
+ uint32_t pfpw_status = 0, w_count = 0;
+ int i = 0, ret = 0;
+ u16 *p = (u16 *) buf;
+
+ /* take care of subpage writes */
+ if (len % 2 != 0) {
+ writeb(*buf, info->nand.IO_ADDR_R);
+ p = (u16 *)(buf + 1);
+ len--;
+ }
+
+ /* configure and start prefetch transfer */
+ ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x1);
+ if (ret) {
+ /* PFPW engine is busy, use cpu copy method */
+ if (info->nand.options & NAND_BUSWIDTH_16)
+ omap_write_buf16(mtd, buf, len);
+ else
+ omap_write_buf8(mtd, buf, len);
+ } else {
+ pfpw_status = gpmc_prefetch_status();
+ while (pfpw_status & 0x3FFF) {
+ w_count = ((pfpw_status >> 24) & 0x7F) >> 1;
+ for (i = 0; (i < w_count) && len; i++, len -= 2)
+ iowrite16(*p++, info->nand_pref_fifo_add);
+ pfpw_status = gpmc_prefetch_status();
+ }
+
+ /* disable and stop the PFPW engine */
+ gpmc_prefetch_reset();
+ }
+}
+
+#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH_DMA
+/*
+ * omap_nand_dma_cb: callback on the completion of dma transfer
+ * @lch: logical channel
+ * @ch_satuts: channel status
+ * @data: pointer to completion data structure
+ */
+static void omap_nand_dma_cb(int lch, u16 ch_status, void *data)
+{
+ complete((struct completion *) data);
+}
+
+/*
+ * omap_nand_dma_transfer: configer and start dma transfer
+ * @mtd: MTD device structure
+ * @addr: virtual address in RAM of source/destination
+ * @len: number of data bytes to be transferred
+ * @is_write: flag for read/write operation
+ */
+static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
+ unsigned int len, int is_write)
+{
+ struct omap_nand_info *info = container_of(mtd,
+ struct omap_nand_info, mtd);
+ uint32_t prefetch_status = 0;
+ enum dma_data_direction dir = is_write ? DMA_TO_DEVICE :
+ DMA_FROM_DEVICE;
+ dma_addr_t dma_addr;
+ int ret;
+
+ /* The fifo depth is 64 bytes. We have a sync at each frame and frame
+ * length is 64 bytes.
+ */
+ int buf_len = len >> 6;
+
+ if (addr >= high_memory) {
+ struct page *p1;
+
+ if (((size_t)addr & PAGE_MASK) !=
+ ((size_t)(addr + len - 1) & PAGE_MASK))
+ goto out_copy;
+ p1 = vmalloc_to_page(addr);
+ if (!p1)
+ goto out_copy;
+ addr = page_address(p1) + ((size_t)addr & ~PAGE_MASK);
+ }
+
+ dma_addr = dma_map_single(&info->pdev->dev, addr, len, dir);
+ if (dma_mapping_error(&info->pdev->dev, dma_addr)) {
+ dev_err(&info->pdev->dev,
+ "Couldn't DMA map a %d byte buffer\n", len);
+ goto out_copy;
+ }
+
+ if (is_write) {
+ omap_set_dma_dest_params(info->dma_ch, 0, OMAP_DMA_AMODE_CONSTANT,
+ info->phys_base, 0, 0);
+ omap_set_dma_src_params(info->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
+ dma_addr, 0, 0);
+ omap_set_dma_transfer_params(info->dma_ch, OMAP_DMA_DATA_TYPE_S32,
+ 0x10, buf_len, OMAP_DMA_SYNC_FRAME,
+ OMAP24XX_DMA_GPMC, OMAP_DMA_DST_SYNC);
+ } else {
+ omap_set_dma_src_params(info->dma_ch, 0, OMAP_DMA_AMODE_CONSTANT,
+ info->phys_base, 0, 0);
+ omap_set_dma_dest_params(info->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
+ dma_addr, 0, 0);
+ omap_set_dma_transfer_params(info->dma_ch, OMAP_DMA_DATA_TYPE_S32,
+ 0x10, buf_len, OMAP_DMA_SYNC_FRAME,
+ OMAP24XX_DMA_GPMC, OMAP_DMA_SRC_SYNC);
+ }
+ /* configure and start prefetch transfer */
+ ret = gpmc_prefetch_enable(info->gpmc_cs, 0x1, len, is_write);
+ if (ret)
+ /* PFPW engine is busy, use cpu copy methode */
+ goto out_copy;
+
+ init_completion(&info->comp);
+
+ omap_start_dma(info->dma_ch);
+
+ /* setup and start DMA using dma_addr */
+ wait_for_completion(&info->comp);
+
+ while (0x3fff & (prefetch_status = gpmc_prefetch_status()))
+ ;
+ /* disable and stop the PFPW engine */
+ gpmc_prefetch_reset();
+
+ dma_unmap_single(&info->pdev->dev, dma_addr, len, dir);
+ return 0;
+
+out_copy:
+ if (info->nand.options & NAND_BUSWIDTH_16)
+ is_write == 0 ? omap_read_buf16(mtd, (u_char *) addr, len)
+ : omap_write_buf16(mtd, (u_char *) addr, len);
+ else
+ is_write == 0 ? omap_read_buf8(mtd, (u_char *) addr, len)
+ : omap_write_buf8(mtd, (u_char *) addr, len);
+ return 0;
+}
+#else
+static void omap_nand_dma_cb(int lch, u16 ch_status, void *data) {}
+static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
+ unsigned int len, int is_write)
+{
+ return 0;
+}
+#endif
+
+/**
+ * omap_read_buf_dma_pref - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf_dma_pref(struct mtd_info *mtd, u_char *buf, int len)
+{
+ if (len <= mtd->oobsize)
+ omap_read_buf_pref(mtd, buf, len);
+ else
+ /* start transfer in DMA mode */
+ omap_nand_dma_transfer(mtd, buf, len, 0x0);
+}
+
+/**
+ * omap_write_buf_dma_pref - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf_dma_pref(struct mtd_info *mtd,
+ const u_char *buf, int len)
+{
+ if (len <= mtd->oobsize)
+ omap_write_buf_pref(mtd, buf, len);
+ else
+ /* start transfer in DMA mode */
+ omap_nand_dma_transfer(mtd, buf, len, 0x1);
+}
+
/**
* omap_verify_buf - Verify chip data against buffer
* @mtd: MTD device structure
@@ -658,17 +942,12 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
err = -ENOMEM;
goto out_release_mem_region;
}
+
info->nand.controller = &info->controller;
info->nand.IO_ADDR_W = info->nand.IO_ADDR_R;
info->nand.cmd_ctrl = omap_hwcontrol;
- /* REVISIT: only supports 16-bit NAND flash */
-
- info->nand.read_buf = omap_read_buf16;
- info->nand.write_buf = omap_write_buf16;
- info->nand.verify_buf = omap_verify_buf;
-
/*
* If RDY/BSY line is connected to OMAP then use the omap ready
* funcrtion and the generic nand_wait function which reads the status
@@ -689,6 +968,40 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
== 0x1000)
info->nand.options |= NAND_BUSWIDTH_16;
+ if (use_prefetch) {
+ /* copy the virtual address of nand base for fifo access */
+ info->nand_pref_fifo_add = info->nand.IO_ADDR_R;
+
+ info->nand.read_buf = omap_read_buf_pref;
+ info->nand.write_buf = omap_write_buf_pref;
+ if (use_dma) {
+ err = omap_request_dma(OMAP24XX_DMA_GPMC, "NAND",
+ omap_nand_dma_cb, &info->comp, &info->dma_ch);
+ if (err < 0) {
+ info->dma_ch = -1;
+ printk(KERN_WARNING "DMA request failed."
+ " Non-dma data transfer mode\n");
+ } else {
+ omap_set_dma_dest_burst_mode(info->dma_ch,
+ OMAP_DMA_DATA_BURST_16);
+ omap_set_dma_src_burst_mode(info->dma_ch,
+ OMAP_DMA_DATA_BURST_16);
+
+ info->nand.read_buf = omap_read_buf_dma_pref;
+ info->nand.write_buf = omap_write_buf_dma_pref;
+ }
+ }
+ } else {
+ if (info->nand.options & NAND_BUSWIDTH_16) {
+ info->nand.read_buf = omap_read_buf16;
+ info->nand.write_buf = omap_write_buf16;
+ } else {
+ info->nand.read_buf = omap_read_buf8;
+ info->nand.write_buf = omap_write_buf8;
+ }
+ }
+ info->nand.verify_buf = omap_verify_buf;
+
#ifdef CONFIG_MTD_NAND_OMAP_HWECC
info->nand.ecc.bytes = 3;
info->nand.ecc.size = 512;
@@ -744,9 +1057,12 @@ static int omap_nand_remove(struct platform_device *pdev)
struct omap_nand_info *info = mtd->priv;
platform_set_drvdata(pdev, NULL);
+ if (use_dma)
+ omap_free_dma(info->dma_ch);
+
/* Release NAND device, its internal structures and partitions */
nand_release(&info->mtd);
- iounmap(info->nand.IO_ADDR_R);
+ iounmap(info->nand_pref_fifo_add);
kfree(&info->mtd);
return 0;
}
@@ -763,6 +1079,15 @@ static struct platform_driver omap_nand_driver = {
static int __init omap_nand_init(void)
{
printk(KERN_INFO "%s driver initializing\n", DRIVER_NAME);
+
+ /* This check is required if driver is being
+ * loaded run time as a module
+ */
+ if ((1 == use_dma) && (0 == use_prefetch)) {
+ printk(KERN_INFO"Wrong parameters: 'use_dma' can not be 1 "
+ "without use_prefetch'. Prefetch will not be"
+ " used in either mode (mpu or dma)\n");
+ }
return platform_driver_register(&omap_nand_driver);
}
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index 0d9d4bc9c762..f59c07427af3 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -171,7 +171,6 @@ static int __devexit orion_nand_remove(struct platform_device *pdev)
}
static struct platform_driver orion_nand_driver = {
- .probe = orion_nand_probe,
.remove = __devexit_p(orion_nand_remove),
.driver = {
.name = "orion_nand",
@@ -181,7 +180,7 @@ static struct platform_driver orion_nand_driver = {
static int __init orion_nand_init(void)
{
- return platform_driver_register(&orion_nand_driver);
+ return platform_driver_probe(&orion_nand_driver, orion_nand_probe);
}
static void __exit orion_nand_exit(void)
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 30a8ce6d3e69..6ea520ae2410 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -102,6 +102,7 @@ enum {
ERR_SENDCMD = -2,
ERR_DBERR = -3,
ERR_BBERR = -4,
+ ERR_SBERR = -5,
};
enum {
@@ -564,11 +565,13 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
status = nand_readl(info, NDSR);
- if (status & (NDSR_RDDREQ | NDSR_DBERR)) {
+ if (status & (NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR)) {
if (status & NDSR_DBERR)
info->retcode = ERR_DBERR;
+ else if (status & NDSR_SBERR)
+ info->retcode = ERR_SBERR;
- disable_int(info, NDSR_RDDREQ | NDSR_DBERR);
+ disable_int(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR);
if (info->use_dma) {
info->state = STATE_DMA_READING;
@@ -670,7 +673,7 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr))
break;
- pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR);
+ pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR);
/* We only are OOB, so if the data has error, does not matter */
if (info->retcode == ERR_DBERR)
@@ -687,7 +690,7 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr))
break;
- pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR);
+ pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR);
if (info->retcode == ERR_DBERR) {
/* for blank page (all 0xff), HW will calculate its ECC as
@@ -861,8 +864,12 @@ static int pxa3xx_nand_ecc_correct(struct mtd_info *mtd,
* consider it as a ecc error which will tell the caller the
* read fail We have distinguish all the errors, but the
* nand_read_ecc only check this function return value
+ *
+ * Corrected (single-bit) errors must also be noted.
*/
- if (info->retcode != ERR_NONE)
+ if (info->retcode == ERR_SBERR)
+ return 1;
+ else if (info->retcode != ERR_NONE)
return -1;
return 0;
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 2bc896623e2d..02bef21f2e4b 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -329,7 +329,7 @@ static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_va
}
static int flctl_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf)
+ uint8_t *buf, int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -857,7 +857,6 @@ static int __exit flctl_remove(struct platform_device *pdev)
}
static struct platform_driver flctl_driver = {
- .probe = flctl_probe,
.remove = flctl_remove,
.driver = {
.name = "sh_flctl",
@@ -867,7 +866,7 @@ static struct platform_driver flctl_driver = {
static int __init flctl_nand_init(void)
{
- return platform_driver_register(&flctl_driver);
+ return platform_driver_probe(&flctl_driver, flctl_probe);
}
static void __exit flctl_nand_cleanup(void)
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
index daa6a4c3b8ce..92c73344a669 100644
--- a/drivers/mtd/nand/tmio_nand.c
+++ b/drivers/mtd/nand/tmio_nand.c
@@ -301,6 +301,21 @@ static int tmio_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
return 0;
}
+static int tmio_nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
+ unsigned char *read_ecc, unsigned char *calc_ecc)
+{
+ int r0, r1;
+
+ /* assume ecc.size = 512 and ecc.bytes = 6 */
+ r0 = __nand_correct_data(buf, read_ecc, calc_ecc, 256);
+ if (r0 < 0)
+ return r0;
+ r1 = __nand_correct_data(buf + 256, read_ecc + 3, calc_ecc + 3, 256);
+ if (r1 < 0)
+ return r1;
+ return r0 + r1;
+}
+
static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio)
{
struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
@@ -424,7 +439,7 @@ static int tmio_probe(struct platform_device *dev)
nand_chip->ecc.bytes = 6;
nand_chip->ecc.hwctl = tmio_nand_enable_hwecc;
nand_chip->ecc.calculate = tmio_nand_calculate_ecc;
- nand_chip->ecc.correct = nand_correct_data;
+ nand_chip->ecc.correct = tmio_nand_correct_data;
if (data)
nand_chip->badblock_pattern = data->badblock_pattern;
diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c
index 488088eff2ca..73af8324d0d0 100644
--- a/drivers/mtd/nand/txx9ndfmc.c
+++ b/drivers/mtd/nand/txx9ndfmc.c
@@ -189,18 +189,43 @@ static int txx9ndfmc_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
uint8_t *ecc_code)
{
struct platform_device *dev = mtd_to_platdev(mtd);
+ struct nand_chip *chip = mtd->priv;
+ int eccbytes;
u32 mcr = txx9ndfmc_read(dev, TXX9_NDFMCR);
mcr &= ~TXX9_NDFMCR_ECC_ALL;
txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_OFF, TXX9_NDFMCR);
txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_READ, TXX9_NDFMCR);
- ecc_code[1] = txx9ndfmc_read(dev, TXX9_NDFDTR);
- ecc_code[0] = txx9ndfmc_read(dev, TXX9_NDFDTR);
- ecc_code[2] = txx9ndfmc_read(dev, TXX9_NDFDTR);
+ for (eccbytes = chip->ecc.bytes; eccbytes > 0; eccbytes -= 3) {
+ ecc_code[1] = txx9ndfmc_read(dev, TXX9_NDFDTR);
+ ecc_code[0] = txx9ndfmc_read(dev, TXX9_NDFDTR);
+ ecc_code[2] = txx9ndfmc_read(dev, TXX9_NDFDTR);
+ ecc_code += 3;
+ }
txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_OFF, TXX9_NDFMCR);
return 0;
}
+static int txx9ndfmc_correct_data(struct mtd_info *mtd, unsigned char *buf,
+ unsigned char *read_ecc, unsigned char *calc_ecc)
+{
+ struct nand_chip *chip = mtd->priv;
+ int eccsize;
+ int corrected = 0;
+ int stat;
+
+ for (eccsize = chip->ecc.size; eccsize > 0; eccsize -= 256) {
+ stat = __nand_correct_data(buf, read_ecc, calc_ecc, 256);
+ if (stat < 0)
+ return stat;
+ corrected += stat;
+ buf += 256;
+ read_ecc += 3;
+ calc_ecc += 3;
+ }
+ return corrected;
+}
+
static void txx9ndfmc_enable_hwecc(struct mtd_info *mtd, int mode)
{
struct platform_device *dev = mtd_to_platdev(mtd);
@@ -244,6 +269,22 @@ static void txx9ndfmc_initialize(struct platform_device *dev)
#define TXX9NDFMC_NS_TO_CYC(gbusclk, ns) \
DIV_ROUND_UP((ns) * DIV_ROUND_UP(gbusclk, 1000), 1000000)
+static int txx9ndfmc_nand_scan(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ int ret;
+
+ ret = nand_scan_ident(mtd, 1);
+ if (!ret) {
+ if (mtd->writesize >= 512) {
+ chip->ecc.size = mtd->writesize;
+ chip->ecc.bytes = 3 * (mtd->writesize / 256);
+ }
+ ret = nand_scan_tail(mtd);
+ }
+ return ret;
+}
+
static int __init txx9ndfmc_probe(struct platform_device *dev)
{
struct txx9ndfmc_platform_data *plat = dev->dev.platform_data;
@@ -321,9 +362,10 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
chip->cmd_ctrl = txx9ndfmc_cmd_ctrl;
chip->dev_ready = txx9ndfmc_dev_ready;
chip->ecc.calculate = txx9ndfmc_calculate_ecc;
- chip->ecc.correct = nand_correct_data;
+ chip->ecc.correct = txx9ndfmc_correct_data;
chip->ecc.hwctl = txx9ndfmc_enable_hwecc;
chip->ecc.mode = NAND_ECC_HW;
+ /* txx9ndfmc_nand_scan will overwrite ecc.size and ecc.bytes */
chip->ecc.size = 256;
chip->ecc.bytes = 3;
chip->chip_delay = 100;
@@ -349,7 +391,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
if (plat->wide_mask & (1 << i))
chip->options |= NAND_BUSWIDTH_16;
- if (nand_scan(mtd, 1)) {
+ if (txx9ndfmc_nand_scan(mtd)) {
kfree(txx9_priv->mtdname);
kfree(txx9_priv);
continue;
diff --git a/drivers/mtd/nand/w90p910_nand.c b/drivers/mtd/nand/w90p910_nand.c
new file mode 100644
index 000000000000..7680e731348a
--- /dev/null
+++ b/drivers/mtd/nand/w90p910_nand.c
@@ -0,0 +1,382 @@
+/*
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#define REG_FMICSR 0x00
+#define REG_SMCSR 0xa0
+#define REG_SMISR 0xac
+#define REG_SMCMD 0xb0
+#define REG_SMADDR 0xb4
+#define REG_SMDATA 0xb8
+
+#define RESET_FMI 0x01
+#define NAND_EN 0x08
+#define READYBUSY (0x01 << 18)
+
+#define SWRST 0x01
+#define PSIZE (0x01 << 3)
+#define DMARWEN (0x03 << 1)
+#define BUSWID (0x01 << 4)
+#define ECC4EN (0x01 << 5)
+#define WP (0x01 << 24)
+#define NANDCS (0x01 << 25)
+#define ENDADDR (0x01 << 31)
+
+#define read_data_reg(dev) \
+ __raw_readl((dev)->reg + REG_SMDATA)
+
+#define write_data_reg(dev, val) \
+ __raw_writel((val), (dev)->reg + REG_SMDATA)
+
+#define write_cmd_reg(dev, val) \
+ __raw_writel((val), (dev)->reg + REG_SMCMD)
+
+#define write_addr_reg(dev, val) \
+ __raw_writel((val), (dev)->reg + REG_SMADDR)
+
+struct w90p910_nand {
+ struct mtd_info mtd;
+ struct nand_chip chip;
+ void __iomem *reg;
+ struct clk *clk;
+ spinlock_t lock;
+};
+
+static const struct mtd_partition partitions[] = {
+ {
+ .name = "NAND FS 0",
+ .offset = 0,
+ .size = 8 * 1024 * 1024
+ },
+ {
+ .name = "NAND FS 1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL
+ }
+};
+
+static unsigned char w90p910_nand_read_byte(struct mtd_info *mtd)
+{
+ unsigned char ret;
+ struct w90p910_nand *nand;
+
+ nand = container_of(mtd, struct w90p910_nand, mtd);
+
+ ret = (unsigned char)read_data_reg(nand);
+
+ return ret;
+}
+
+static void w90p910_nand_read_buf(struct mtd_info *mtd,
+ unsigned char *buf, int len)
+{
+ int i;
+ struct w90p910_nand *nand;
+
+ nand = container_of(mtd, struct w90p910_nand, mtd);
+
+ for (i = 0; i < len; i++)
+ buf[i] = (unsigned char)read_data_reg(nand);
+}
+
+static void w90p910_nand_write_buf(struct mtd_info *mtd,
+ const unsigned char *buf, int len)
+{
+ int i;
+ struct w90p910_nand *nand;
+
+ nand = container_of(mtd, struct w90p910_nand, mtd);
+
+ for (i = 0; i < len; i++)
+ write_data_reg(nand, buf[i]);
+}
+
+static int w90p910_verify_buf(struct mtd_info *mtd,
+ const unsigned char *buf, int len)
+{
+ int i;
+ struct w90p910_nand *nand;
+
+ nand = container_of(mtd, struct w90p910_nand, mtd);
+
+ for (i = 0; i < len; i++) {
+ if (buf[i] != (unsigned char)read_data_reg(nand))
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int w90p910_check_rb(struct w90p910_nand *nand)
+{
+ unsigned int val;
+ spin_lock(&nand->lock);
+ val = __raw_readl(REG_SMISR);
+ val &= READYBUSY;
+ spin_unlock(&nand->lock);
+
+ return val;
+}
+
+static int w90p910_nand_devready(struct mtd_info *mtd)
+{
+ struct w90p910_nand *nand;
+ int ready;
+
+ nand = container_of(mtd, struct w90p910_nand, mtd);
+
+ ready = (w90p910_check_rb(nand)) ? 1 : 0;
+ return ready;
+}
+
+static void w90p910_nand_command_lp(struct mtd_info *mtd,
+ unsigned int command, int column, int page_addr)
+{
+ register struct nand_chip *chip = mtd->priv;
+ struct w90p910_nand *nand;
+
+ nand = container_of(mtd, struct w90p910_nand, mtd);
+
+ if (command == NAND_CMD_READOOB) {
+ column += mtd->writesize;
+ command = NAND_CMD_READ0;
+ }
+
+ write_cmd_reg(nand, command & 0xff);
+
+ if (column != -1 || page_addr != -1) {
+
+ if (column != -1) {
+ if (chip->options & NAND_BUSWIDTH_16)
+ column >>= 1;
+ write_addr_reg(nand, column);
+ write_addr_reg(nand, column >> 8 | ENDADDR);
+ }
+ if (page_addr != -1) {
+ write_addr_reg(nand, page_addr);
+
+ if (chip->chipsize > (128 << 20)) {
+ write_addr_reg(nand, page_addr >> 8);
+ write_addr_reg(nand, page_addr >> 16 | ENDADDR);
+ } else {
+ write_addr_reg(nand, page_addr >> 8 | ENDADDR);
+ }
+ }
+ }
+
+ switch (command) {
+ case NAND_CMD_CACHEDPROG:
+ case NAND_CMD_PAGEPROG:
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ case NAND_CMD_SEQIN:
+ case NAND_CMD_RNDIN:
+ case NAND_CMD_STATUS:
+ case NAND_CMD_DEPLETE1:
+ return;
+
+ case NAND_CMD_STATUS_ERROR:
+ case NAND_CMD_STATUS_ERROR0:
+ case NAND_CMD_STATUS_ERROR1:
+ case NAND_CMD_STATUS_ERROR2:
+ case NAND_CMD_STATUS_ERROR3:
+ udelay(chip->chip_delay);
+ return;
+
+ case NAND_CMD_RESET:
+ if (chip->dev_ready)
+ break;
+ udelay(chip->chip_delay);
+
+ write_cmd_reg(nand, NAND_CMD_STATUS);
+ write_cmd_reg(nand, command);
+
+ while (!w90p910_check_rb(nand))
+ ;
+
+ return;
+
+ case NAND_CMD_RNDOUT:
+ write_cmd_reg(nand, NAND_CMD_RNDOUTSTART);
+ return;
+
+ case NAND_CMD_READ0:
+
+ write_cmd_reg(nand, NAND_CMD_READSTART);
+ default:
+
+ if (!chip->dev_ready) {
+ udelay(chip->chip_delay);
+ return;
+ }
+ }
+
+ /* Apply this short delay always to ensure that we do wait tWB in
+ * any case on any machine. */
+ ndelay(100);
+
+ while (!chip->dev_ready(mtd))
+ ;
+}
+
+
+static void w90p910_nand_enable(struct w90p910_nand *nand)
+{
+ unsigned int val;
+ spin_lock(&nand->lock);
+ __raw_writel(RESET_FMI, (nand->reg + REG_FMICSR));
+
+ val = __raw_readl(nand->reg + REG_FMICSR);
+
+ if (!(val & NAND_EN))
+ __raw_writel(val | NAND_EN, REG_FMICSR);
+
+ val = __raw_readl(nand->reg + REG_SMCSR);
+
+ val &= ~(SWRST|PSIZE|DMARWEN|BUSWID|ECC4EN|NANDCS);
+ val |= WP;
+
+ __raw_writel(val, nand->reg + REG_SMCSR);
+
+ spin_unlock(&nand->lock);
+}
+
+static int __devinit w90p910_nand_probe(struct platform_device *pdev)
+{
+ struct w90p910_nand *w90p910_nand;
+ struct nand_chip *chip;
+ int retval;
+ struct resource *res;
+
+ retval = 0;
+
+ w90p910_nand = kzalloc(sizeof(struct w90p910_nand), GFP_KERNEL);
+ if (!w90p910_nand)
+ return -ENOMEM;
+ chip = &(w90p910_nand->chip);
+
+ w90p910_nand->mtd.priv = chip;
+ w90p910_nand->mtd.owner = THIS_MODULE;
+ spin_lock_init(&w90p910_nand->lock);
+
+ w90p910_nand->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(w90p910_nand->clk)) {
+ retval = -ENOENT;
+ goto fail1;
+ }
+ clk_enable(w90p910_nand->clk);
+
+ chip->cmdfunc = w90p910_nand_command_lp;
+ chip->dev_ready = w90p910_nand_devready;
+ chip->read_byte = w90p910_nand_read_byte;
+ chip->write_buf = w90p910_nand_write_buf;
+ chip->read_buf = w90p910_nand_read_buf;
+ chip->verify_buf = w90p910_verify_buf;
+ chip->chip_delay = 50;
+ chip->options = 0;
+ chip->ecc.mode = NAND_ECC_SOFT;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ retval = -ENXIO;
+ goto fail1;
+ }
+
+ if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+ retval = -EBUSY;
+ goto fail1;
+ }
+
+ w90p910_nand->reg = ioremap(res->start, resource_size(res));
+ if (!w90p910_nand->reg) {
+ retval = -ENOMEM;
+ goto fail2;
+ }
+
+ w90p910_nand_enable(w90p910_nand);
+
+ if (nand_scan(&(w90p910_nand->mtd), 1)) {
+ retval = -ENXIO;
+ goto fail3;
+ }
+
+ add_mtd_partitions(&(w90p910_nand->mtd), partitions,
+ ARRAY_SIZE(partitions));
+
+ platform_set_drvdata(pdev, w90p910_nand);
+
+ return retval;
+
+fail3: iounmap(w90p910_nand->reg);
+fail2: release_mem_region(res->start, resource_size(res));
+fail1: kfree(w90p910_nand);
+ return retval;
+}
+
+static int __devexit w90p910_nand_remove(struct platform_device *pdev)
+{
+ struct w90p910_nand *w90p910_nand = platform_get_drvdata(pdev);
+ struct resource *res;
+
+ iounmap(w90p910_nand->reg);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, resource_size(res));
+
+ clk_disable(w90p910_nand->clk);
+ clk_put(w90p910_nand->clk);
+
+ kfree(w90p910_nand);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver w90p910_nand_driver = {
+ .probe = w90p910_nand_probe,
+ .remove = __devexit_p(w90p910_nand_remove),
+ .driver = {
+ .name = "w90p910-fmi",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init w90p910_nand_init(void)
+{
+ return platform_driver_register(&w90p910_nand_driver);
+}
+
+static void __exit w90p910_nand_exit(void)
+{
+ platform_driver_unregister(&w90p910_nand_driver);
+}
+
+module_init(w90p910_nand_init);
+module_exit(w90p910_nand_exit);
+
+MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
+MODULE_DESCRIPTION("w90p910 nand driver!");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:w90p910-fmi");
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-06-26 00:34:40 +0200