diff options
Diffstat (limited to 'drivers/net/Kconfig')
-rw-r--r-- | drivers/net/Kconfig | 178 |
1 files changed, 137 insertions, 41 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index ce2fcdd4ab90..f6668cdaac85 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2,6 +2,9 @@ # Network device configuration # +config HAVE_NET_MACB + bool + menuconfig NETDEVICES default y if UML depends on NET @@ -177,6 +180,13 @@ config NET_SB1000 source "drivers/net/arcnet/Kconfig" +config MII + tristate "Generic Media Independent Interface device support" + help + Most ethernet controllers have MII transceiver either as an external + or internal device. It is safe to say Y or M here even if your + ethernet card lacks MII. + source "drivers/net/phy/Kconfig" # @@ -212,16 +222,9 @@ menuconfig NET_ETHERNET if NET_ETHERNET -config MII - tristate "Generic Media Independent Interface device support" - help - Most ethernet controllers have MII transceiver either as an external - or internal device. It is safe to say Y or M here even if your - ethernet card lack MII. - config MACB tristate "Atmel MACB support" - depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 + depends on HAVE_NET_MACB select PHYLIB help The Atmel MACB ethernet interface is found on many AT32 and AT91 @@ -484,7 +487,7 @@ config XTENSA_XT2000_SONIC config MIPS_AU1X00_ENET tristate "MIPS AU1000 Ethernet support" - depends on SOC_AU1X00 + depends on MIPS_ALCHEMY select PHYLIB select CRC32 help @@ -530,14 +533,15 @@ config SH_ETH depends on SUPERH && \ (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || \ CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7619 || \ - CPU_SUBTYPE_SH7724) + CPU_SUBTYPE_SH7724 || CPU_SUBTYPE_SH7757) select CRC32 select MII select MDIO_BITBANG select PHYLIB help Renesas SuperH Ethernet device driver. - This driver support SH7710, SH7712, SH7763, SH7619, and SH7724. + This driver supporting CPUs are: + - SH7710, SH7712, SH7763, SH7619, SH7724, and SH7757. config SUNLANCE tristate "Sun LANCE support" @@ -879,14 +883,6 @@ config BFIN_RX_DESC_NUM help Set the number of buffer packets used in driver. -config BFIN_MAC_RMII - bool "RMII PHY Interface" - depends on BFIN_MAC - default y if BFIN527_EZKIT - default n if BFIN537_STAMP - help - Use Reduced PHY MII Interface - config BFIN_MAC_USE_HWSTAMP bool "Use IEEE 1588 hwstamp" depends on BFIN_MAC && BF518 @@ -913,20 +909,30 @@ config SMC91X tristate "SMC 91C9x/91C1xxx support" select CRC32 select MII - depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \ + depends on ARM || M32R || SUPERH || \ MIPS || BLACKFIN || MN10300 || COLDFIRE help This is a driver for SMC's 91x series of Ethernet chipsets, including the SMC91C94 and the SMC91C111. Say Y if you want it compiled into the kernel, and read the file <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO, - available from <http://www.linuxdoc.org/docs.html#howto>. + available from <http://www.tldp.org/docs.html#howto>. This driver is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called smc91x. If you want to compile it as a module, say M here and read <file:Documentation/kbuild/modules.txt>. +config PXA168_ETH + tristate "Marvell pxa168 ethernet support" + depends on CPU_PXA168 + select PHYLIB + help + This driver supports the pxa168 Ethernet ports. + + To compile this driver as a module, choose M here. The module + will be called pxa168_eth. + config NET_NETX tristate "NetX Ethernet support" select MII @@ -940,6 +946,8 @@ config NET_NETX config TI_DAVINCI_EMAC tristate "TI DaVinci EMAC Support" depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 ) + select TI_DAVINCI_MDIO + select TI_DAVINCI_CPDMA select PHYLIB help This driver supports TI's DaVinci Ethernet . @@ -947,6 +955,25 @@ config TI_DAVINCI_EMAC To compile this driver as a module, choose M here: the module will be called davinci_emac_driver. This is recommended. +config TI_DAVINCI_MDIO + tristate "TI DaVinci MDIO Support" + depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 ) + select PHYLIB + help + This driver supports TI's DaVinci MDIO module. + + To compile this driver as a module, choose M here: the module + will be called davinci_mdio. This is recommended. + +config TI_DAVINCI_CPDMA + tristate "TI DaVinci CPDMA Support" + depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 ) + help + This driver supports TI's DaVinci CPDMA dma engine. + + To compile this driver as a module, choose M here: the module + will be called davinci_cpdma. This is recommended. + config DM9000 tristate "DM9000 support" depends on ARM || BLACKFIN || MIPS @@ -1014,13 +1041,13 @@ config SMC911X tristate "SMSC LAN911[5678] support" select CRC32 select MII - depends on ARM || SUPERH + depends on ARM || SUPERH || MN10300 help This is a driver for SMSC's LAN911x series of Ethernet chipsets including the new LAN9115, LAN9116, LAN9117, and LAN9118. Say Y if you want it compiled into the kernel, and read the Ethernet-HOWTO, available from - <http://www.linuxdoc.org/docs.html#howto>. + <http://www.tldp.org/docs.html#howto>. This driver is also available as a module. The module will be called smc911x. If you want to compile it as a module, say M @@ -1028,7 +1055,7 @@ config SMC911X config SMSC911X tristate "SMSC LAN911x/LAN921x families embedded ethernet support" - depends on ARM || SUPERH || BLACKFIN || MIPS + depends on ARM || SUPERH || BLACKFIN || MIPS || MN10300 select CRC32 select MII select PHYLIB @@ -1040,6 +1067,14 @@ config SMSC911X <file:Documentation/networking/net-modules.txt>. The module will be called smsc911x. +config SMSC911X_ARCH_HOOKS + def_bool n + depends on SMSC911X + help + If the arch enables this, it allows the arch to implement various + hooks for more comprehensive interrupt control and also to override + the source of the MAC address. + config NET_VENDOR_RACAL bool "Racal-Interlan (Micom) NI cards" depends on ISA @@ -1463,7 +1498,7 @@ config FORCEDETH config CS89x0 tristate "CS89x0 support" depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \ - || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS) + || ARCH_IXDP2X01 || MACH_MX31ADS) ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the @@ -1477,7 +1512,7 @@ config CS89x0 config CS89x0_NONISA_IRQ def_bool y depends on CS89x0 != n - depends on MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS + depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS config TC35815 tristate "TOSHIBA TC35815 Ethernet support" @@ -1502,7 +1537,7 @@ config E100 For the latest Intel PRO/100 network driver for Linux, see: - <http://appsr.intel.com/scripts-df/support_intel.asp> + <http://www.intel.com/p/en_US/support/highlights/network/pro100plus> More specific information on configuring the driver is in <file:Documentation/networking/e100.txt>. @@ -1528,9 +1563,8 @@ config FEALNX select CRC32 select MII help - Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet - cards. Specifications and data at - <http://www.myson.com.hk/mtd/datasheet/>. + Say Y here to support the Myson MTD-800 family of PCI-based Ethernet + cards. <http://www.myson.com.tw/> config NATSEMI tristate "National Semiconductor DP8381x series PCI Ethernet support" @@ -1659,6 +1693,7 @@ config R6040 depends on NET_PCI && PCI select CRC32 select MII + select PHYLIB help This is a driver for the R6040 Fast Ethernet MACs found in the the RDC R-321x System-on-chips. @@ -1703,7 +1738,7 @@ config SMSC9420 This is a driver for SMSC's LAN9420 PCI ethernet adapter. Say Y if you want it compiled into the kernel, and read the Ethernet-HOWTO, available from - <http://www.linuxdoc.org/docs.html#howto>. + <http://www.tldp.org/docs.html#howto>. This driver is also available as a module. The module will be called smsc9420. If you want to compile it as a module, say M @@ -1748,11 +1783,12 @@ config TLAN Please email feedback to <torben.mathiasen@compaq.com>. config KS8842 - tristate "Micrel KSZ8842" - depends on HAS_IOMEM + tristate "Micrel KSZ8841/42 with generic bus interface" + depends on HAS_IOMEM && DMA_ENGINE help - This platform driver is for Micrel KSZ8842 / KS8842 - 2-port ethernet switch chip (managed, VLAN, QoS). + This platform driver is for KSZ8841(1-port) / KS8842(2-port) + ethernet switch chip (managed, VLAN, QoS) from Micrel or + Timberdale(FPGA). config KS8851 tristate "Micrel KS8851 SPI" @@ -2415,7 +2451,7 @@ config UGETH_TX_ON_DEMAND config MV643XX_ETH tristate "Marvell Discovery (643XX) and Orion ethernet support" - depends on MV64X60 || PPC32 || PLAT_ORION + depends on (MV64X60 || PPC32 || PLAT_ORION) && INET select INET_LRO select PHYLIB help @@ -2502,6 +2538,19 @@ config S6GMAC source "drivers/net/stmmac/Kconfig" +config PCH_GBE + tristate "PCH Gigabit Ethernet" + depends on PCI + select MII + ---help--- + This is a gigabit ethernet driver for Topcliff PCH. + Topcliff PCH is the platform controller hub that is used in Intel's + general embedded platform. + Topcliff PCH has Gigabit Ethernet interface. + Using this interface, it is able to access system devices connected + to Gigabit Ethernet. + This driver enables Gigabit Ethernet function. + endif # NETDEV_1000 # @@ -2537,7 +2586,7 @@ config CHELSIO_T1 our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <linux-bugs@chelsio.com>. @@ -2569,7 +2618,7 @@ config CHELSIO_T3 our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <linux-bugs@chelsio.com>. @@ -2594,13 +2643,36 @@ config CHELSIO_T4 our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <linux-bugs@chelsio.com>. To compile this driver as a module choose M here; the module will be called cxgb4. +config CHELSIO_T4VF_DEPENDS + tristate + depends on PCI && INET + default y + +config CHELSIO_T4VF + tristate "Chelsio Communications T4 Virtual Function Ethernet support" + depends on CHELSIO_T4VF_DEPENDS + help + This driver supports Chelsio T4-based gigabit and 10Gb Ethernet + adapters with PCI-E SR-IOV Virtual Functions. + + For general information about Chelsio and our products, visit + our website at <http://www.chelsio.com>. + + For customer support, please visit our customer support page at + <http://www.chelsio.com/support.html>. + + Please send feedback to <linux-bugs@chelsio.com>. + + To compile this driver as a module choose M here; the module + will be called cxgb4vf. + config EHEA tristate "eHEA Ethernet support" depends on IBMEBUS && INET && SPARSEMEM @@ -2614,7 +2686,6 @@ config EHEA config ENIC tristate "Cisco VIC Ethernet NIC Support" depends on PCI && INET - select INET_LRO help This enables the support for the Cisco VIC Ethernet card. @@ -2768,7 +2839,7 @@ config NIU config PASEMI_MAC tristate "PA Semi 1/10Gbit MAC" - depends on PPC_PASEMI && PCI + depends on PPC_PASEMI && PCI && INET select PHYLIB select INET_LRO help @@ -2834,6 +2905,20 @@ config QLGE To compile this driver as a module, choose M here: the module will be called qlge. +config BNA + tristate "Brocade 1010/1020 10Gb Ethernet Driver support" + depends on PCI + ---help--- + This driver supports Brocade 1010/1020 10Gb CEE capable Ethernet + cards. + To compile this driver as a module, choose M here: the module + will be called bna. + + For general information and support, go to the Brocade support + website at: + + <http://support.brocade.com> + source "drivers/net/sfc/Kconfig" source "drivers/net/benet/Kconfig" @@ -3167,6 +3252,17 @@ config PPPOE which contains instruction on how to use this driver (under the heading "Kernel mode PPPoE"). +config PPTP + tristate "PPP over IPv4 (PPTP) (EXPERIMENTAL)" + depends on EXPERIMENTAL && PPP && NET_IPGRE_DEMUX + help + Support for PPP over IPv4.(Point-to-Point Tunneling Protocol) + + This driver requires pppd plugin to work in client mode or + modified pptpd (poptop) to work in server mode. + See http://accel-pptp.sourceforge.net/ for information how to + utilize this module. + config PPPOATM tristate "PPP over ATM" depends on ATM && PPP |