summaryrefslogtreecommitdiffstats
path: root/drivers/net/eepro100.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/eepro100.c')
-rw-r--r--drivers/net/eepro100.c2412
1 files changed, 2412 insertions, 0 deletions
diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
new file mode 100644
index 000000000000..98b3a2fdce90
--- /dev/null
+++ b/drivers/net/eepro100.c
@@ -0,0 +1,2412 @@
+/* drivers/net/eepro100.c: An Intel i82557-559 Ethernet driver for Linux. */
+/*
+ Written 1996-1999 by Donald Becker.
+
+ The driver also contains updates by different kernel developers
+ (see incomplete list below).
+ Current maintainer is Andrey V. Savochkin <saw@saw.sw.com.sg>.
+ Please use this email address and linux-kernel mailing list for bug reports.
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ This driver is for the Intel EtherExpress Pro100 (Speedo3) design.
+ It should work with all i82557/558/559 boards.
+
+ Version history:
+ 1998 Apr - 2000 Feb Andrey V. Savochkin <saw@saw.sw.com.sg>
+ Serious fixes for multicast filter list setting, TX timeout routine;
+ RX ring refilling logic; other stuff
+ 2000 Feb Jeff Garzik <jgarzik@pobox.com>
+ Convert to new PCI driver interface
+ 2000 Mar 24 Dragan Stancevic <visitor@valinux.com>
+ Disabled FC and ER, to avoid lockups when when we get FCP interrupts.
+ 2000 Jul 17 Goutham Rao <goutham.rao@intel.com>
+ PCI DMA API fixes, adding pci_dma_sync_single calls where neccesary
+ 2000 Aug 31 David Mosberger <davidm@hpl.hp.com>
+ rx_align support: enables rx DMA without causing unaligned accesses.
+*/
+
+static const char *version =
+"eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html\n"
+"eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others\n";
+
+/* A few user-configurable values that apply to all boards.
+ First set is undocumented and spelled per Intel recommendations. */
+
+static int congenb /* = 0 */; /* Enable congestion control in the DP83840. */
+static int txfifo = 8; /* Tx FIFO threshold in 4 byte units, 0-15 */
+static int rxfifo = 8; /* Rx FIFO threshold, default 32 bytes. */
+/* Tx/Rx DMA burst length, 0-127, 0 == no preemption, tx==128 -> disabled. */
+static int txdmacount = 128;
+static int rxdmacount /* = 0 */;
+
+#if defined(__ia64__) || defined(__alpha__) || defined(__sparc__) || defined(__mips__) || \
+ defined(__arm__)
+ /* align rx buffers to 2 bytes so that IP header is aligned */
+# define rx_align(skb) skb_reserve((skb), 2)
+# define RxFD_ALIGNMENT __attribute__ ((aligned (2), packed))
+#else
+# define rx_align(skb)
+# define RxFD_ALIGNMENT
+#endif
+
+/* Set the copy breakpoint for the copy-only-tiny-buffer Rx method.
+ Lower values use more memory, but are faster. */
+static int rx_copybreak = 200;
+
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+static int max_interrupt_work = 20;
+
+/* Maximum number of multicast addresses to filter (vs. rx-all-multicast) */
+static int multicast_filter_limit = 64;
+
+/* 'options' is used to pass a transceiver override or full-duplex flag
+ e.g. "options=16" for FD, "options=32" for 100mbps-only. */
+static int full_duplex[] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int options[] = {-1, -1, -1, -1, -1, -1, -1, -1};
+
+/* A few values that may be tweaked. */
+/* The ring sizes should be a power of two for efficiency. */
+#define TX_RING_SIZE 64
+#define RX_RING_SIZE 64
+/* How much slots multicast filter setup may take.
+ Do not descrease without changing set_rx_mode() implementaion. */
+#define TX_MULTICAST_SIZE 2
+#define TX_MULTICAST_RESERV (TX_MULTICAST_SIZE*2)
+/* Actual number of TX packets queued, must be
+ <= TX_RING_SIZE-TX_MULTICAST_RESERV. */
+#define TX_QUEUE_LIMIT (TX_RING_SIZE-TX_MULTICAST_RESERV)
+/* Hysteresis marking queue as no longer full. */
+#define TX_QUEUE_UNFULL (TX_QUEUE_LIMIT-4)
+
+/* Operational parameters that usually are not changed. */
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (2*HZ)
+/* Size of an pre-allocated Rx buffer: <Ethernet MTU> + slack.*/
+#define PKT_BUF_SZ 1536
+
+#include <linux/config.h>
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/mii.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/irq.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+
+static int use_io;
+static int debug = -1;
+#define DEBUG_DEFAULT (NETIF_MSG_DRV | \
+ NETIF_MSG_HW | \
+ NETIF_MSG_RX_ERR | \
+ NETIF_MSG_TX_ERR)
+#define DEBUG ((debug >= 0) ? (1<<debug)-1 : DEBUG_DEFAULT)
+
+
+MODULE_AUTHOR("Maintainer: Andrey V. Savochkin <saw@saw.sw.com.sg>");
+MODULE_DESCRIPTION("Intel i82557/i82558/i82559 PCI EtherExpressPro driver");
+MODULE_LICENSE("GPL");
+module_param(use_io, int, 0);
+module_param(debug, int, 0);
+module_param_array(options, int, NULL, 0);
+module_param_array(full_duplex, int, NULL, 0);
+module_param(congenb, int, 0);
+module_param(txfifo, int, 0);
+module_param(rxfifo, int, 0);
+module_param(txdmacount, int, 0);
+module_param(rxdmacount, int, 0);
+module_param(rx_copybreak, int, 0);
+module_param(max_interrupt_work, int, 0);
+module_param(multicast_filter_limit, int, 0);
+MODULE_PARM_DESC(debug, "debug level (0-6)");
+MODULE_PARM_DESC(options, "Bits 0-3: transceiver type, bit 4: full duplex, bit 5: 100Mbps");
+MODULE_PARM_DESC(full_duplex, "full duplex setting(s) (1)");
+MODULE_PARM_DESC(congenb, "Enable congestion control (1)");
+MODULE_PARM_DESC(txfifo, "Tx FIFO threshold in 4 byte units, (0-15)");
+MODULE_PARM_DESC(rxfifo, "Rx FIFO threshold in 4 byte units, (0-15)");
+MODULE_PARM_DESC(txdmacount, "Tx DMA burst length; 128 - disable (0-128)");
+MODULE_PARM_DESC(rxdmacount, "Rx DMA burst length; 128 - disable (0-128)");
+MODULE_PARM_DESC(rx_copybreak, "copy breakpoint for copy-only-tiny-frames");
+MODULE_PARM_DESC(max_interrupt_work, "maximum events handled per interrupt");
+MODULE_PARM_DESC(multicast_filter_limit, "maximum number of filtered multicast addresses");
+
+#define RUN_AT(x) (jiffies + (x))
+
+#define netdevice_start(dev)
+#define netdevice_stop(dev)
+#define netif_set_tx_timeout(dev, tf, tm) \
+ do { \
+ (dev)->tx_timeout = (tf); \
+ (dev)->watchdog_timeo = (tm); \
+ } while(0)
+
+
+
+/*
+ Theory of Operation
+
+I. Board Compatibility
+
+This device driver is designed for the Intel i82557 "Speedo3" chip, Intel's
+single-chip fast Ethernet controller for PCI, as used on the Intel
+EtherExpress Pro 100 adapter.
+
+II. Board-specific settings
+
+PCI bus devices are configured by the system at boot time, so no jumpers
+need to be set on the board. The system BIOS should be set to assign the
+PCI INTA signal to an otherwise unused system IRQ line. While it's
+possible to share PCI interrupt lines, it negatively impacts performance and
+only recent kernels support it.
+
+III. Driver operation
+
+IIIA. General
+The Speedo3 is very similar to other Intel network chips, that is to say
+"apparently designed on a different planet". This chips retains the complex
+Rx and Tx descriptors and multiple buffers pointers as previous chips, but
+also has simplified Tx and Rx buffer modes. This driver uses the "flexible"
+Tx mode, but in a simplified lower-overhead manner: it associates only a
+single buffer descriptor with each frame descriptor.
+
+Despite the extra space overhead in each receive skbuff, the driver must use
+the simplified Rx buffer mode to assure that only a single data buffer is
+associated with each RxFD. The driver implements this by reserving space
+for the Rx descriptor at the head of each Rx skbuff.
+
+The Speedo-3 has receive and command unit base addresses that are added to
+almost all descriptor pointers. The driver sets these to zero, so that all
+pointer fields are absolute addresses.
+
+The System Control Block (SCB) of some previous Intel chips exists on the
+chip in both PCI I/O and memory space. This driver uses the I/O space
+registers, but might switch to memory mapped mode to better support non-x86
+processors.
+
+IIIB. Transmit structure
+
+The driver must use the complex Tx command+descriptor mode in order to
+have a indirect pointer to the skbuff data section. Each Tx command block
+(TxCB) is associated with two immediately appended Tx Buffer Descriptor
+(TxBD). A fixed ring of these TxCB+TxBD pairs are kept as part of the
+speedo_private data structure for each adapter instance.
+
+The newer i82558 explicitly supports this structure, and can read the two
+TxBDs in the same PCI burst as the TxCB.
+
+This ring structure is used for all normal transmit packets, but the
+transmit packet descriptors aren't long enough for most non-Tx commands such
+as CmdConfigure. This is complicated by the possibility that the chip has
+already loaded the link address in the previous descriptor. So for these
+commands we convert the next free descriptor on the ring to a NoOp, and point
+that descriptor's link to the complex command.
+
+An additional complexity of these non-transmit commands are that they may be
+added asynchronous to the normal transmit queue, so we disable interrupts
+whenever the Tx descriptor ring is manipulated.
+
+A notable aspect of these special configure commands is that they do
+work with the normal Tx ring entry scavenge method. The Tx ring scavenge
+is done at interrupt time using the 'dirty_tx' index, and checking for the
+command-complete bit. While the setup frames may have the NoOp command on the
+Tx ring marked as complete, but not have completed the setup command, this
+is not a problem. The tx_ring entry can be still safely reused, as the
+tx_skbuff[] entry is always empty for config_cmd and mc_setup frames.
+
+Commands may have bits set e.g. CmdSuspend in the command word to either
+suspend or stop the transmit/command unit. This driver always flags the last
+command with CmdSuspend, erases the CmdSuspend in the previous command, and
+then issues a CU_RESUME.
+Note: Watch out for the potential race condition here: imagine
+ erasing the previous suspend
+ the chip processes the previous command
+ the chip processes the final command, and suspends
+ doing the CU_RESUME
+ the chip processes the next-yet-valid post-final-command.
+So blindly sending a CU_RESUME is only safe if we do it immediately after
+after erasing the previous CmdSuspend, without the possibility of an
+intervening delay. Thus the resume command is always within the
+interrupts-disabled region. This is a timing dependence, but handling this
+condition in a timing-independent way would considerably complicate the code.
+
+Note: In previous generation Intel chips, restarting the command unit was a
+notoriously slow process. This is presumably no longer true.
+
+IIIC. Receive structure
+
+Because of the bus-master support on the Speedo3 this driver uses the new
+SKBUFF_RX_COPYBREAK scheme, rather than a fixed intermediate receive buffer.
+This scheme allocates full-sized skbuffs as receive buffers. The value
+SKBUFF_RX_COPYBREAK is used as the copying breakpoint: it is chosen to
+trade-off the memory wasted by passing the full-sized skbuff to the queue
+layer for all frames vs. the copying cost of copying a frame to a
+correctly-sized skbuff.
+
+For small frames the copying cost is negligible (esp. considering that we
+are pre-loading the cache with immediately useful header information), so we
+allocate a new, minimally-sized skbuff. For large frames the copying cost
+is non-trivial, and the larger copy might flush the cache of useful data, so
+we pass up the skbuff the packet was received into.
+
+IV. Notes
+
+Thanks to Steve Williams of Intel for arranging the non-disclosure agreement
+that stated that I could disclose the information. But I still resent
+having to sign an Intel NDA when I'm helping Intel sell their own product!
+
+*/
+
+static int speedo_found1(struct pci_dev *pdev, void __iomem *ioaddr, int fnd_cnt, int acpi_idle_state);
+
+enum pci_flags_bit {
+ PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4,
+ PCI_ADDR0=0x10<<0, PCI_ADDR1=0x10<<1, PCI_ADDR2=0x10<<2, PCI_ADDR3=0x10<<3,
+};
+
+/* Offsets to the various registers.
+ All accesses need not be longword aligned. */
+enum speedo_offsets {
+ SCBStatus = 0, SCBCmd = 2, /* Rx/Command Unit command and status. */
+ SCBIntmask = 3,
+ SCBPointer = 4, /* General purpose pointer. */
+ SCBPort = 8, /* Misc. commands and operands. */
+ SCBflash = 12, SCBeeprom = 14, /* EEPROM and flash memory control. */
+ SCBCtrlMDI = 16, /* MDI interface control. */
+ SCBEarlyRx = 20, /* Early receive byte count. */
+};
+/* Commands that can be put in a command list entry. */
+enum commands {
+ CmdNOp = 0, CmdIASetup = 0x10000, CmdConfigure = 0x20000,
+ CmdMulticastList = 0x30000, CmdTx = 0x40000, CmdTDR = 0x50000,
+ CmdDump = 0x60000, CmdDiagnose = 0x70000,
+ CmdSuspend = 0x40000000, /* Suspend after completion. */
+ CmdIntr = 0x20000000, /* Interrupt after completion. */
+ CmdTxFlex = 0x00080000, /* Use "Flexible mode" for CmdTx command. */
+};
+/* Clear CmdSuspend (1<<30) avoiding interference with the card access to the
+ status bits. Previous driver versions used separate 16 bit fields for
+ commands and statuses. --SAW
+ */
+#if defined(__alpha__)
+# define clear_suspend(cmd) clear_bit(30, &(cmd)->cmd_status);
+#else
+# if defined(__LITTLE_ENDIAN)
+# define clear_suspend(cmd) ((__u16 *)&(cmd)->cmd_status)[1] &= ~0x4000
+# elif defined(__BIG_ENDIAN)
+# define clear_suspend(cmd) ((__u16 *)&(cmd)->cmd_status)[1] &= ~0x0040
+# else
+# error Unsupported byteorder
+# endif
+#endif
+
+enum SCBCmdBits {
+ SCBMaskCmdDone=0x8000, SCBMaskRxDone=0x4000, SCBMaskCmdIdle=0x2000,
+ SCBMaskRxSuspend=0x1000, SCBMaskEarlyRx=0x0800, SCBMaskFlowCtl=0x0400,
+ SCBTriggerIntr=0x0200, SCBMaskAll=0x0100,
+ /* The rest are Rx and Tx commands. */
+ CUStart=0x0010, CUResume=0x0020, CUStatsAddr=0x0040, CUShowStats=0x0050,
+ CUCmdBase=0x0060, /* CU Base address (set to zero) . */
+ CUDumpStats=0x0070, /* Dump then reset stats counters. */
+ RxStart=0x0001, RxResume=0x0002, RxAbort=0x0004, RxAddrLoad=0x0006,
+ RxResumeNoResources=0x0007,
+};
+
+enum SCBPort_cmds {
+ PortReset=0, PortSelfTest=1, PortPartialReset=2, PortDump=3,
+};
+
+/* The Speedo3 Rx and Tx frame/buffer descriptors. */
+struct descriptor { /* A generic descriptor. */
+ volatile s32 cmd_status; /* All command and status fields. */
+ u32 link; /* struct descriptor * */
+ unsigned char params[0];
+};
+
+/* The Speedo3 Rx and Tx buffer descriptors. */
+struct RxFD { /* Receive frame descriptor. */
+ volatile s32 status;
+ u32 link; /* struct RxFD * */
+ u32 rx_buf_addr; /* void * */
+ u32 count;
+} RxFD_ALIGNMENT;
+
+/* Selected elements of the Tx/RxFD.status word. */
+enum RxFD_bits {
+ RxComplete=0x8000, RxOK=0x2000,
+ RxErrCRC=0x0800, RxErrAlign=0x0400, RxErrTooBig=0x0200, RxErrSymbol=0x0010,
+ RxEth2Type=0x0020, RxNoMatch=0x0004, RxNoIAMatch=0x0002,
+ TxUnderrun=0x1000, StatusComplete=0x8000,
+};
+
+#define CONFIG_DATA_SIZE 22
+struct TxFD { /* Transmit frame descriptor set. */
+ s32 status;
+ u32 link; /* void * */
+ u32 tx_desc_addr; /* Always points to the tx_buf_addr element. */
+ s32 count; /* # of TBD (=1), Tx start thresh., etc. */
+ /* This constitutes two "TBD" entries -- we only use one. */
+#define TX_DESCR_BUF_OFFSET 16
+ u32 tx_buf_addr0; /* void *, frame to be transmitted. */
+ s32 tx_buf_size0; /* Length of Tx frame. */
+ u32 tx_buf_addr1; /* void *, frame to be transmitted. */
+ s32 tx_buf_size1; /* Length of Tx frame. */
+ /* the structure must have space for at least CONFIG_DATA_SIZE starting
+ * from tx_desc_addr field */
+};
+
+/* Multicast filter setting block. --SAW */
+struct speedo_mc_block {
+ struct speedo_mc_block *next;
+ unsigned int tx;
+ dma_addr_t frame_dma;
+ unsigned int len;
+ struct descriptor frame __attribute__ ((__aligned__(16)));
+};
+
+/* Elements of the dump_statistics block. This block must be lword aligned. */
+struct speedo_stats {
+ u32 tx_good_frames;
+ u32 tx_coll16_errs;
+ u32 tx_late_colls;
+ u32 tx_underruns;
+ u32 tx_lost_carrier;
+ u32 tx_deferred;
+ u32 tx_one_colls;
+ u32 tx_multi_colls;
+ u32 tx_total_colls;
+ u32 rx_good_frames;
+ u32 rx_crc_errs;
+ u32 rx_align_errs;
+ u32 rx_resource_errs;
+ u32 rx_overrun_errs;
+ u32 rx_colls_errs;
+ u32 rx_runt_errs;
+ u32 done_marker;
+};
+
+enum Rx_ring_state_bits {
+ RrNoMem=1, RrPostponed=2, RrNoResources=4, RrOOMReported=8,
+};
+
+/* Do not change the position (alignment) of the first few elements!
+ The later elements are grouped for cache locality.
+
+ Unfortunately, all the positions have been shifted since there.
+ A new re-alignment is required. 2000/03/06 SAW */
+struct speedo_private {
+ void __iomem *regs;
+ struct TxFD *tx_ring; /* Commands (usually CmdTxPacket). */
+ struct RxFD *rx_ringp[RX_RING_SIZE]; /* Rx descriptor, used as ring. */
+ /* The addresses of a Tx/Rx-in-place packets/buffers. */
+ struct sk_buff *tx_skbuff[TX_RING_SIZE];
+ struct sk_buff *rx_skbuff[RX_RING_SIZE];
+ /* Mapped addresses of the rings. */
+ dma_addr_t tx_ring_dma;
+#define TX_RING_ELEM_DMA(sp, n) ((sp)->tx_ring_dma + (n)*sizeof(struct TxFD))
+ dma_addr_t rx_ring_dma[RX_RING_SIZE];
+ struct descriptor *last_cmd; /* Last command sent. */
+ unsigned int cur_tx, dirty_tx; /* The ring entries to be free()ed. */
+ spinlock_t lock; /* Group with Tx control cache line. */
+ u32 tx_threshold; /* The value for txdesc.count. */
+ struct RxFD *last_rxf; /* Last filled RX buffer. */
+ dma_addr_t last_rxf_dma;
+ unsigned int cur_rx, dirty_rx; /* The next free ring entry */
+ long last_rx_time; /* Last Rx, in jiffies, to handle Rx hang. */
+ struct net_device_stats stats;
+ struct speedo_stats *lstats;
+ dma_addr_t lstats_dma;
+ int chip_id;
+ struct pci_dev *pdev;
+ struct timer_list timer; /* Media selection timer. */
+ struct speedo_mc_block *mc_setup_head; /* Multicast setup frame list head. */
+ struct speedo_mc_block *mc_setup_tail; /* Multicast setup frame list tail. */
+ long in_interrupt; /* Word-aligned dev->interrupt */
+ unsigned char acpi_pwr;
+ signed char rx_mode; /* Current PROMISC/ALLMULTI setting. */
+ unsigned int tx_full:1; /* The Tx queue is full. */
+ unsigned int flow_ctrl:1; /* Use 802.3x flow control. */
+ unsigned int rx_bug:1; /* Work around receiver hang errata. */
+ unsigned char default_port:8; /* Last dev->if_port value. */
+ unsigned char rx_ring_state; /* RX ring status flags. */
+ unsigned short phy[2]; /* PHY media interfaces available. */
+ unsigned short partner; /* Link partner caps. */
+ struct mii_if_info mii_if; /* MII API hooks, info */
+ u32 msg_enable; /* debug message level */
+};
+
+/* The parameters for a CmdConfigure operation.
+ There are so many options that it would be difficult to document each bit.
+ We mostly use the default or recommended settings. */
+static const char i82557_config_cmd[CONFIG_DATA_SIZE] = {
+ 22, 0x08, 0, 0, 0, 0, 0x32, 0x03, 1, /* 1=Use MII 0=Use AUI */
+ 0, 0x2E, 0, 0x60, 0,
+ 0xf2, 0x48, 0, 0x40, 0xf2, 0x80, /* 0x40=Force full-duplex */
+ 0x3f, 0x05, };
+static const char i82558_config_cmd[CONFIG_DATA_SIZE] = {
+ 22, 0x08, 0, 1, 0, 0, 0x22, 0x03, 1, /* 1=Use MII 0=Use AUI */
+ 0, 0x2E, 0, 0x60, 0x08, 0x88,
+ 0x68, 0, 0x40, 0xf2, 0x84, /* Disable FC */
+ 0x31, 0x05, };
+
+/* PHY media interface chips. */
+static const char *phys[] = {
+ "None", "i82553-A/B", "i82553-C", "i82503",
+ "DP83840", "80c240", "80c24", "i82555",
+ "unknown-8", "unknown-9", "DP83840A", "unknown-11",
+ "unknown-12", "unknown-13", "unknown-14", "unknown-15", };
+enum phy_chips { NonSuchPhy=0, I82553AB, I82553C, I82503, DP83840, S80C240,
+ S80C24, I82555, DP83840A=10, };
+static const char is_mii[] = { 0, 1, 1, 0, 1, 1, 0, 1 };
+#define EE_READ_CMD (6)
+
+static int eepro100_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent);
+
+static int do_eeprom_cmd(void __iomem *ioaddr, int cmd, int cmd_len);
+static int mdio_read(struct net_device *dev, int phy_id, int location);
+static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
+static int speedo_open(struct net_device *dev);
+static void speedo_resume(struct net_device *dev);
+static void speedo_timer(unsigned long data);
+static void speedo_init_rx_ring(struct net_device *dev);
+static void speedo_tx_timeout(struct net_device *dev);
+static int speedo_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static void speedo_refill_rx_buffers(struct net_device *dev, int force);
+static int speedo_rx(struct net_device *dev);
+static void speedo_tx_buffer_gc(struct net_device *dev);
+static irqreturn_t speedo_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
+static int speedo_close(struct net_device *dev);
+static struct net_device_stats *speedo_get_stats(struct net_device *dev);
+static int speedo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static void set_rx_mode(struct net_device *dev);
+static void speedo_show_state(struct net_device *dev);
+static struct ethtool_ops ethtool_ops;
+
+
+
+#ifdef honor_default_port
+/* Optional driver feature to allow forcing the transceiver setting.
+ Not recommended. */
+static int mii_ctrl[8] = { 0x3300, 0x3100, 0x0000, 0x0100,
+ 0x2000, 0x2100, 0x0400, 0x3100};
+#endif
+
+/* How to wait for the command unit to accept a command.
+ Typically this takes 0 ticks. */
+static inline unsigned char wait_for_cmd_done(struct net_device *dev,
+ struct speedo_private *sp)
+{
+ int wait = 1000;
+ void __iomem *cmd_ioaddr = sp->regs + SCBCmd;
+ unsigned char r;
+
+ do {
+ udelay(1);
+ r = ioread8(cmd_ioaddr);
+ } while(r && --wait >= 0);
+
+ if (wait < 0)
+ printk(KERN_ALERT "%s: wait_for_cmd_done timeout!\n", dev->name);
+ return r;
+}
+
+static int __devinit eepro100_init_one (struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ void __iomem *ioaddr;
+ int irq, pci_bar;
+ int acpi_idle_state = 0, pm;
+ static int cards_found /* = 0 */;
+ unsigned long pci_base;
+
+#ifndef MODULE
+ /* when built-in, we only print version if device is found */
+ static int did_version;
+ if (did_version++ == 0)
+ printk(version);
+#endif
+
+ /* save power state before pci_enable_device overwrites it */
+ pm = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ if (pm) {
+ u16 pwr_command;
+ pci_read_config_word(pdev, pm + PCI_PM_CTRL, &pwr_command);
+ acpi_idle_state = pwr_command & PCI_PM_CTRL_STATE_MASK;
+ }
+
+ if (pci_enable_device(pdev))
+ goto err_out_free_mmio_region;
+
+ pci_set_master(pdev);
+
+ if (!request_region(pci_resource_start(pdev, 1),
+ pci_resource_len(pdev, 1), "eepro100")) {
+ printk (KERN_ERR "eepro100: cannot reserve I/O ports\n");
+ goto err_out_none;
+ }
+ if (!request_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0), "eepro100")) {
+ printk (KERN_ERR "eepro100: cannot reserve MMIO region\n");
+ goto err_out_free_pio_region;
+ }
+
+ irq = pdev->irq;
+ pci_bar = use_io ? 1 : 0;
+ pci_base = pci_resource_start(pdev, pci_bar);
+ if (DEBUG & NETIF_MSG_PROBE)
+ printk("Found Intel i82557 PCI Speedo at %#lx, IRQ %d.\n",
+ pci_base, irq);
+
+ ioaddr = pci_iomap(pdev, pci_bar, 0);
+ if (!ioaddr) {
+ printk (KERN_ERR "eepro100: cannot remap IO\n");
+ goto err_out_free_mmio_region;
+ }
+
+ if (speedo_found1(pdev, ioaddr, cards_found, acpi_idle_state) == 0)
+ cards_found++;
+ else
+ goto err_out_iounmap;
+
+ return 0;
+
+err_out_iounmap: ;
+ pci_iounmap(pdev, ioaddr);
+err_out_free_mmio_region:
+ release_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
+err_out_free_pio_region:
+ release_region(pci_resource_start(pdev, 1), pci_resource_len(pdev, 1));
+err_out_none:
+ return -ENODEV;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+
+static void poll_speedo (struct net_device *dev)
+{
+ /* disable_irq is not very nice, but with the funny lockless design
+ we have no other choice. */
+ disable_irq(dev->irq);
+ speedo_interrupt (dev->irq, dev, NULL);
+ enable_irq(dev->irq);
+}
+#endif
+
+static int __devinit speedo_found1(struct pci_dev *pdev,
+ void __iomem *ioaddr, int card_idx, int acpi_idle_state)
+{
+ struct net_device *dev;
+ struct speedo_private *sp;
+ const char *product;
+ int i, option;
+ u16 eeprom[0x100];
+ int size;
+ void *tx_ring_space;
+ dma_addr_t tx_ring_dma;
+
+ size = TX_RING_SIZE * sizeof(struct TxFD) + sizeof(struct speedo_stats);
+ tx_ring_space = pci_alloc_consistent(pdev, size, &tx_ring_dma);
+ if (tx_ring_space == NULL)
+ return -1;
+
+ dev = alloc_etherdev(sizeof(struct speedo_private));
+ if (dev == NULL) {
+ printk(KERN_ERR "eepro100: Could not allocate ethernet device.\n");
+ pci_free_consistent(pdev, size, tx_ring_space, tx_ring_dma);
+ return -1;
+ }
+
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ if (dev->mem_start > 0)
+ option = dev->mem_start;
+ else if (card_idx >= 0 && options[card_idx] >= 0)
+ option = options[card_idx];
+ else
+ option = 0;
+
+ rtnl_lock();
+ if (dev_alloc_name(dev, dev->name) < 0)
+ goto err_free_unlock;
+
+ /* Read the station address EEPROM before doing the reset.
+ Nominally his should even be done before accepting the device, but
+ then we wouldn't have a device name with which to report the error.
+ The size test is for 6 bit vs. 8 bit address serial EEPROMs.
+ */
+ {
+ void __iomem *iobase;
+ int read_cmd, ee_size;
+ u16 sum;
+ int j;
+
+ /* Use IO only to avoid postponed writes and satisfy EEPROM timing
+ requirements. */
+ iobase = pci_iomap(pdev, 1, pci_resource_len(pdev, 1));
+ if (!iobase)
+ goto err_free_unlock;
+ if ((do_eeprom_cmd(iobase, EE_READ_CMD << 24, 27) & 0xffe0000)
+ == 0xffe0000) {
+ ee_size = 0x100;
+ read_cmd = EE_READ_CMD << 24;
+ } else {
+ ee_size = 0x40;
+ read_cmd = EE_READ_CMD << 22;
+ }
+
+ for (j = 0, i = 0, sum = 0; i < ee_size; i++) {
+ u16 value = do_eeprom_cmd(iobase, read_cmd | (i << 16), 27);
+ eeprom[i] = value;
+ sum += value;
+ if (i < 3) {
+ dev->dev_addr[j++] = value;
+ dev->dev_addr[j++] = value >> 8;
+ }
+ }
+ if (sum != 0xBABA)
+ printk(KERN_WARNING "%s: Invalid EEPROM checksum %#4.4x, "
+ "check settings before activating this device!\n",
+ dev->name, sum);
+ /* Don't unregister_netdev(dev); as the EEPro may actually be
+ usable, especially if the MAC address is set later.
+ On the other hand, it may be unusable if MDI data is corrupted. */
+
+ pci_iounmap(pdev, iobase);
+ }
+
+ /* Reset the chip: stop Tx and Rx processes and clear counters.
+ This takes less than 10usec and will easily finish before the next
+ action. */
+ iowrite32(PortReset, ioaddr + SCBPort);
+ ioread32(ioaddr + SCBPort);
+ udelay(10);
+
+ if (eeprom[3] & 0x0100)
+ product = "OEM i82557/i82558 10/100 Ethernet";
+ else
+ product = pci_name(pdev);
+
+ printk(KERN_INFO "%s: %s, ", dev->name, product);
+
+ for (i = 0; i < 5; i++)
+ printk("%2.2X:", dev->dev_addr[i]);
+ printk("%2.2X, ", dev->dev_addr[i]);
+ printk("IRQ %d.\n", pdev->irq);
+
+ sp = netdev_priv(dev);
+
+ /* we must initialize this early, for mdio_{read,write} */
+ sp->regs = ioaddr;
+
+#if 1 || defined(kernel_bloat)
+ /* OK, this is pure kernel bloat. I don't like it when other drivers
+ waste non-pageable kernel space to emit similar messages, but I need
+ them for bug reports. */
+ {
+ const char *connectors[] = {" RJ45", " BNC", " AUI", " MII"};
+ /* The self-test results must be paragraph aligned. */
+ volatile s32 *self_test_results;
+ int boguscnt = 16000; /* Timeout for set-test. */
+ if ((eeprom[3] & 0x03) != 0x03)
+ printk(KERN_INFO " Receiver lock-up bug exists -- enabling"
+ " work-around.\n");
+ printk(KERN_INFO " Board assembly %4.4x%2.2x-%3.3d, Physical"
+ " connectors present:",
+ eeprom[8], eeprom[9]>>8, eeprom[9] & 0xff);
+ for (i = 0; i < 4; i++)
+ if (eeprom[5] & (1<<i))
+ printk(connectors[i]);
+ printk("\n"KERN_INFO" Primary interface chip %s PHY #%d.\n",
+ phys[(eeprom[6]>>8)&15], eeprom[6] & 0x1f);
+ if (eeprom[7] & 0x0700)
+ printk(KERN_INFO " Secondary interface chip %s.\n",
+ phys[(eeprom[7]>>8)&7]);
+ if (((eeprom[6]>>8) & 0x3f) == DP83840
+ || ((eeprom[6]>>8) & 0x3f) == DP83840A) {
+ int mdi_reg23 = mdio_read(dev, eeprom[6] & 0x1f, 23) | 0x0422;
+ if (congenb)
+ mdi_reg23 |= 0x0100;
+ printk(KERN_INFO" DP83840 specific setup, setting register 23 to %4.4x.\n",
+ mdi_reg23);
+ mdio_write(dev, eeprom[6] & 0x1f, 23, mdi_reg23);
+ }
+ if ((option >= 0) && (option & 0x70)) {
+ printk(KERN_INFO " Forcing %dMbs %s-duplex operation.\n",
+ (option & 0x20 ? 100 : 10),
+ (option & 0x10 ? "full" : "half"));
+ mdio_write(dev, eeprom[6] & 0x1f, MII_BMCR,
+ ((option & 0x20) ? 0x2000 : 0) | /* 100mbps? */
+ ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */
+ }
+
+ /* Perform a system self-test. */
+ self_test_results = (s32*) ((((long) tx_ring_space) + 15) & ~0xf);
+ self_test_results[0] = 0;
+ self_test_results[1] = -1;
+ iowrite32(tx_ring_dma | PortSelfTest, ioaddr + SCBPort);
+ do {
+ udelay(10);
+ } while (self_test_results[1] == -1 && --boguscnt >= 0);
+
+ if (boguscnt < 0) { /* Test optimized out. */
+ printk(KERN_ERR "Self test failed, status %8.8x:\n"
+ KERN_ERR " Failure to initialize the i82557.\n"
+ KERN_ERR " Verify that the card is a bus-master"
+ " capable slot.\n",
+ self_test_results[1]);
+ } else
+ printk(KERN_INFO " General self-test: %s.\n"
+ KERN_INFO " Serial sub-system self-test: %s.\n"
+ KERN_INFO " Internal registers self-test: %s.\n"
+ KERN_INFO " ROM checksum self-test: %s (%#8.8x).\n",
+ self_test_results[1] & 0x1000 ? "failed" : "passed",
+ self_test_results[1] & 0x0020 ? "failed" : "passed",
+ self_test_results[1] & 0x0008 ? "failed" : "passed",
+ self_test_results[1] & 0x0004 ? "failed" : "passed",
+ self_test_results[0]);
+ }
+#endif /* kernel_bloat */
+
+ iowrite32(PortReset, ioaddr + SCBPort);
+ ioread32(ioaddr + SCBPort);
+ udelay(10);
+
+ /* Return the chip to its original power state. */
+ pci_set_power_state(pdev, acpi_idle_state);
+
+ pci_set_drvdata (pdev, dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ dev->irq = pdev->irq;
+
+ sp->pdev = pdev;
+ sp->msg_enable = DEBUG;
+ sp->acpi_pwr = acpi_idle_state;
+ sp->tx_ring = tx_ring_space;
+ sp->tx_ring_dma = tx_ring_dma;
+ sp->lstats = (struct speedo_stats *)(sp->tx_ring + TX_RING_SIZE);
+ sp->lstats_dma = TX_RING_ELEM_DMA(sp, TX_RING_SIZE);
+ init_timer(&sp->timer); /* used in ioctl() */
+ spin_lock_init(&sp->lock);
+
+ sp->mii_if.full_duplex = option >= 0 && (option & 0x10) ? 1 : 0;
+ if (card_idx >= 0) {
+ if (full_duplex[card_idx] >= 0)
+ sp->mii_if.full_duplex = full_duplex[card_idx];
+ }
+ sp->default_port = option >= 0 ? (option & 0x0f) : 0;
+
+ sp->phy[0] = eeprom[6];
+ sp->phy[1] = eeprom[7];
+
+ sp->mii_if.phy_id = eeprom[6] & 0x1f;
+ sp->mii_if.phy_id_mask = 0x1f;
+ sp->mii_if.reg_num_mask = 0x1f;
+ sp->mii_if.dev = dev;
+ sp->mii_if.mdio_read = mdio_read;
+ sp->mii_if.mdio_write = mdio_write;
+
+ sp->rx_bug = (eeprom[3] & 0x03) == 3 ? 0 : 1;
+ if (((pdev->device > 0x1030 && (pdev->device < 0x103F)))
+ || (pdev->device == 0x2449) || (pdev->device == 0x2459)
+ || (pdev->device == 0x245D)) {
+ sp->chip_id = 1;
+ }
+
+ if (sp->rx_bug)
+ printk(KERN_INFO " Receiver lock-up workaround activated.\n");
+
+ /* The Speedo-specific entries in the device structure. */
+ dev->open = &speedo_open;
+ dev->hard_start_xmit = &speedo_start_xmit;
+ netif_set_tx_timeout(dev, &speedo_tx_timeout, TX_TIMEOUT);
+ dev->stop = &speedo_close;
+ dev->get_stats = &speedo_get_stats;
+ dev->set_multicast_list = &set_rx_mode;
+ dev->do_ioctl = &speedo_ioctl;
+ SET_ETHTOOL_OPS(dev, &ethtool_ops);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = &poll_speedo;
+#endif
+
+ if (register_netdevice(dev))
+ goto err_free_unlock;
+ rtnl_unlock();
+
+ return 0;
+
+ err_free_unlock:
+ rtnl_unlock();
+ free_netdev(dev);
+ return -1;
+}
+
+static void do_slow_command(struct net_device *dev, struct speedo_private *sp, int cmd)
+{
+ void __iomem *cmd_ioaddr = sp->regs + SCBCmd;
+ int wait = 0;
+ do
+ if (ioread8(cmd_ioaddr) == 0) break;
+ while(++wait <= 200);
+ if (wait > 100)
+ printk(KERN_ERR "Command %4.4x never accepted (%d polls)!\n",
+ ioread8(cmd_ioaddr), wait);
+
+ iowrite8(cmd, cmd_ioaddr);
+
+ for (wait = 0; wait <= 100; wait++)
+ if (ioread8(cmd_ioaddr) == 0) return;
+ for (; wait <= 20000; wait++)
+ if (ioread8(cmd_ioaddr) == 0) return;
+ else udelay(1);
+ printk(KERN_ERR "Command %4.4x was not accepted after %d polls!"
+ " Current status %8.8x.\n",
+ cmd, wait, ioread32(sp->regs + SCBStatus));
+}
+
+/* Serial EEPROM section.
+ A "bit" grungy, but we work our way through bit-by-bit :->. */
+/* EEPROM_Ctrl bits. */
+#define EE_SHIFT_CLK 0x01 /* EEPROM shift clock. */
+#define EE_CS 0x02 /* EEPROM chip select. */
+#define EE_DATA_WRITE 0x04 /* EEPROM chip data in. */
+#define EE_DATA_READ 0x08 /* EEPROM chip data out. */
+#define EE_ENB (0x4800 | EE_CS)
+#define EE_WRITE_0 0x4802
+#define EE_WRITE_1 0x4806
+#define EE_OFFSET SCBeeprom
+
+/* The fixes for the code were kindly provided by Dragan Stancevic
+ <visitor@valinux.com> to strictly follow Intel specifications of EEPROM
+ access timing.
+ The publicly available sheet 64486302 (sec. 3.1) specifies 1us access
+ interval for serial EEPROM. However, it looks like that there is an
+ additional requirement dictating larger udelay's in the code below.
+ 2000/05/24 SAW */
+static int __devinit do_eeprom_cmd(void __iomem *ioaddr, int cmd, int cmd_len)
+{
+ unsigned retval = 0;
+ void __iomem *ee_addr = ioaddr + SCBeeprom;
+
+ iowrite16(EE_ENB, ee_addr); udelay(2);
+ iowrite16(EE_ENB | EE_SHIFT_CLK, ee_addr); udelay(2);
+
+ /* Shift the command bits out. */
+ do {
+ short dataval = (cmd & (1 << cmd_len)) ? EE_WRITE_1 : EE_WRITE_0;
+ iowrite16(dataval, ee_addr); udelay(2);
+ iowrite16(dataval | EE_SHIFT_CLK, ee_addr); udelay(2);
+ retval = (retval << 1) | ((ioread16(ee_addr) & EE_DATA_READ) ? 1 : 0);
+ } while (--cmd_len >= 0);
+ iowrite16(EE_ENB, ee_addr); udelay(2);
+
+ /* Terminate the EEPROM access. */
+ iowrite16(EE_ENB & ~EE_CS, ee_addr);
+ return retval;
+}
+
+static int mdio_read(struct net_device *dev, int phy_id, int location)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ void __iomem *ioaddr = sp->regs;
+ int val, boguscnt = 64*10; /* <64 usec. to complete, typ 27 ticks */
+ iowrite32(0x08000000 | (location<<16) | (phy_id<<21), ioaddr + SCBCtrlMDI);
+ do {
+ val = ioread32(ioaddr + SCBCtrlMDI);
+ if (--boguscnt < 0) {
+ printk(KERN_ERR " mdio_read() timed out with val = %8.8x.\n", val);
+ break;
+ }
+ } while (! (val & 0x10000000));
+ return val & 0xffff;
+}
+
+static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ void __iomem *ioaddr = sp->regs;
+ int val, boguscnt = 64*10; /* <64 usec. to complete, typ 27 ticks */
+ iowrite32(0x04000000 | (location<<16) | (phy_id<<21) | value,
+ ioaddr + SCBCtrlMDI);
+ do {
+ val = ioread32(ioaddr + SCBCtrlMDI);
+ if (--boguscnt < 0) {
+ printk(KERN_ERR" mdio_write() timed out with val = %8.8x.\n", val);
+ break;
+ }
+ } while (! (val & 0x10000000));
+}
+
+static int
+speedo_open(struct net_device *dev)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ void __iomem *ioaddr = sp->regs;
+ int retval;
+
+ if (netif_msg_ifup(sp))
+ printk(KERN_DEBUG "%s: speedo_open() irq %d.\n", dev->name, dev->irq);
+
+ pci_set_power_state(sp->pdev, PCI_D0);
+
+ /* Set up the Tx queue early.. */
+ sp->cur_tx = 0;
+ sp->dirty_tx = 0;
+ sp->last_cmd = NULL;
+ sp->tx_full = 0;
+ sp->in_interrupt = 0;
+
+ /* .. we can safely take handler calls during init. */
+ retval = request_irq(dev->irq, &speedo_interrupt, SA_SHIRQ, dev->name, dev);
+ if (retval) {
+ return retval;
+ }
+
+ dev->if_port = sp->default_port;
+
+#ifdef oh_no_you_dont_unless_you_honour_the_options_passed_in_to_us
+ /* Retrigger negotiation to reset previous errors. */
+ if ((sp->phy[0] & 0x8000) == 0) {
+ int phy_addr = sp->phy[0] & 0x1f ;
+ /* Use 0x3300 for restarting NWay, other values to force xcvr:
+ 0x0000 10-HD
+ 0x0100 10-FD
+ 0x2000 100-HD
+ 0x2100 100-FD
+ */
+#ifdef honor_default_port
+ mdio_write(dev, phy_addr, MII_BMCR, mii_ctrl[dev->default_port & 7]);
+#else
+ mdio_write(dev, phy_addr, MII_BMCR, 0x3300);
+#endif
+ }
+#endif
+
+ speedo_init_rx_ring(dev);
+
+ /* Fire up the hardware. */
+ iowrite16(SCBMaskAll, ioaddr + SCBCmd);
+ speedo_resume(dev);
+
+ netdevice_start(dev);
+ netif_start_queue(dev);
+
+ /* Setup the chip and configure the multicast list. */
+ sp->mc_setup_head = NULL;
+ sp->mc_setup_tail = NULL;
+ sp->flow_ctrl = sp->partner = 0;
+ sp->rx_mode = -1; /* Invalid -> always reset the mode. */
+ set_rx_mode(dev);
+ if ((sp->phy[0] & 0x8000) == 0)
+ sp->mii_if.advertising = mdio_read(dev, sp->phy[0] & 0x1f, MII_ADVERTISE);
+
+ mii_check_link(&sp->mii_if);
+
+ if (netif_msg_ifup(sp)) {
+ printk(KERN_DEBUG "%s: Done speedo_open(), status %8.8x.\n",
+ dev->name, ioread16(ioaddr + SCBStatus));
+ }
+
+ /* Set the timer. The timer serves a dual purpose:
+ 1) to monitor the media interface (e.g. link beat) and perhaps switch
+ to an alternate media type
+ 2) to monitor Rx activity, and restart the Rx process if the receiver
+ hangs. */
+ sp->timer.expires = RUN_AT((24*HZ)/10); /* 2.4 sec. */
+ sp->timer.data = (unsigned long)dev;
+ sp->timer.function = &speedo_timer; /* timer handler */
+ add_timer(&sp->timer);
+
+ /* No need to wait for the command unit to accept here. */
+ if ((sp->phy[0] & 0x8000) == 0)
+ mdio_read(dev, sp->phy[0] & 0x1f, MII_BMCR);
+
+ return 0;
+}
+
+/* Start the chip hardware after a full reset. */
+static void speedo_resume(struct net_device *dev)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ void __iomem *ioaddr = sp->regs;
+
+ /* Start with a Tx threshold of 256 (0x..20.... 8 byte units). */
+ sp->tx_threshold = 0x01208000;
+
+ /* Set the segment registers to '0'. */
+ if (wait_for_cmd_done(dev, sp) != 0) {
+ iowrite32(PortPartialReset, ioaddr + SCBPort);
+ udelay(10);
+ }
+
+ iowrite32(0, ioaddr + SCBPointer);
+ ioread32(ioaddr + SCBPointer); /* Flush to PCI. */
+ udelay(10); /* Bogus, but it avoids the bug. */
+
+ /* Note: these next two operations can take a while. */
+ do_slow_command(dev, sp, RxAddrLoad);
+ do_slow_command(dev, sp, CUCmdBase);
+
+ /* Load the statistics block and rx ring addresses. */
+ iowrite32(sp->lstats_dma, ioaddr + SCBPointer);
+ ioread32(ioaddr + SCBPointer); /* Flush to PCI */
+
+ iowrite8(CUStatsAddr, ioaddr + SCBCmd);
+ sp->lstats->done_marker = 0;
+ wait_for_cmd_done(dev, sp);
+
+ if (sp->rx_ringp[sp->cur_rx % RX_RING_SIZE] == NULL) {
+ if (netif_msg_rx_err(sp))
+ printk(KERN_DEBUG "%s: NULL cur_rx in speedo_resume().\n",
+ dev->name);
+ } else {
+ iowrite32(sp->rx_ring_dma[sp->cur_rx % RX_RING_SIZE],
+ ioaddr + SCBPointer);
+ ioread32(ioaddr + SCBPointer); /* Flush to PCI */
+ }
+
+ /* Note: RxStart should complete instantly. */
+ do_slow_command(dev, sp, RxStart);
+ do_slow_command(dev, sp, CUDumpStats);
+
+ /* Fill the first command with our physical address. */
+ {
+ struct descriptor *ias_cmd;
+
+ ias_cmd =
+ (struct descriptor *)&sp->tx_ring[sp->cur_tx++ % TX_RING_SIZE];
+ /* Avoid a bug(?!) here by marking the command already completed. */
+ ias_cmd->cmd_status = cpu_to_le32((CmdSuspend | CmdIASetup) | 0xa000);
+ ias_cmd->link =
+ cpu_to_le32(TX_RING_ELEM_DMA(sp, sp->cur_tx % TX_RING_SIZE));
+ memcpy(ias_cmd->params, dev->dev_addr, 6);
+ if (sp->last_cmd)
+ clear_suspend(sp->last_cmd);
+ sp->last_cmd = ias_cmd;
+ }
+
+ /* Start the chip's Tx process and unmask interrupts. */
+ iowrite32(TX_RING_ELEM_DMA(sp, sp->dirty_tx % TX_RING_SIZE),
+ ioaddr + SCBPointer);
+ /* We are not ACK-ing FCP and ER in the interrupt handler yet so they should
+ remain masked --Dragan */
+ iowrite16(CUStart | SCBMaskEarlyRx | SCBMaskFlowCtl, ioaddr + SCBCmd);
+}
+
+/*
+ * Sometimes the receiver stops making progress. This routine knows how to
+ * get it going again, without losing packets or being otherwise nasty like
+ * a chip reset would be. Previously the driver had a whole sequence
+ * of if RxSuspended, if it's no buffers do one thing, if it's no resources,
+ * do another, etc. But those things don't really matter. Separate logic
+ * in the ISR provides for allocating buffers--the other half of operation
+ * is just making sure the receiver is active. speedo_rx_soft_reset does that.
+ * This problem with the old, more involved algorithm is shown up under
+ * ping floods on the order of 60K packets/second on a 100Mbps fdx network.
+ */
+static void
+speedo_rx_soft_reset(struct net_device *dev)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ struct RxFD *rfd;
+ void __iomem *ioaddr;
+
+ ioaddr = sp->regs;
+ if (wait_for_cmd_done(dev, sp) != 0) {
+ printk("%s: previous command stalled\n", dev->name);
+ return;
+ }
+ /*
+ * Put the hardware into a known state.
+ */
+ iowrite8(RxAbort, ioaddr + SCBCmd);
+
+ rfd = sp->rx_ringp[sp->cur_rx % RX_RING_SIZE];
+
+ rfd->rx_buf_addr = 0xffffffff;
+
+ if (wait_for_cmd_done(dev, sp) != 0) {
+ printk("%s: RxAbort command stalled\n", dev->name);
+ return;
+ }
+ iowrite32(sp->rx_ring_dma[sp->cur_rx % RX_RING_SIZE],
+ ioaddr + SCBPointer);
+ iowrite8(RxStart, ioaddr + SCBCmd);
+}
+
+
+/* Media monitoring and control. */
+static void speedo_timer(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *)data;
+ struct speedo_private *sp = netdev_priv(dev);
+ void __iomem *ioaddr = sp->regs;
+ int phy_num = sp->phy[0] & 0x1f;
+
+ /* We have MII and lost link beat. */
+ if ((sp->phy[0] & 0x8000) == 0) {
+ int partner = mdio_read(dev, phy_num, MII_LPA);
+ if (partner != sp->partner) {
+ int flow_ctrl = sp->mii_if.advertising & partner & 0x0400 ? 1 : 0;
+ if (netif_msg_link(sp)) {
+ printk(KERN_DEBUG "%s: Link status change.\n", dev->name);
+ printk(KERN_DEBUG "%s: Old partner %x, new %x, adv %x.\n",
+ dev->name, sp->partner, partner, sp->mii_if.advertising);
+ }
+ sp->partner = partner;
+ if (flow_ctrl != sp->flow_ctrl) {
+ sp->flow_ctrl = flow_ctrl;
+ sp->rx_mode = -1; /* Trigger a reload. */
+ }
+ }
+ }
+ mii_check_link(&sp->mii_if);
+ if (netif_msg_timer(sp)) {
+ printk(KERN_DEBUG "%s: Media control tick, status %4.4x.\n",
+ dev->name, ioread16(ioaddr + SCBStatus));
+ }
+ if (sp->rx_mode < 0 ||
+ (sp->rx_bug && jiffies - sp->last_rx_time > 2*HZ)) {
+ /* We haven't received a packet in a Long Time. We might have been
+ bitten by the receiver hang bug. This can be cleared by sending
+ a set multicast list command. */
+ if (netif_msg_timer(sp))
+ printk(KERN_DEBUG "%s: Sending a multicast list set command"
+ " from a timer routine,"
+ " m=%d, j=%ld, l=%ld.\n",
+ dev->name, sp->rx_mode, jiffies, sp->last_rx_time);
+ set_rx_mode(dev);
+ }
+ /* We must continue to monitor the media. */
+ sp->timer.expires = RUN_AT(2*HZ); /* 2.0 sec. */
+ add_timer(&sp->timer);
+}
+
+static void speedo_show_state(struct net_device *dev)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ int i;
+
+ if (netif_msg_pktdata(sp)) {
+ printk(KERN_DEBUG "%s: Tx ring dump, Tx queue %u / %u:\n",
+ dev->name, sp->cur_tx, sp->dirty_tx);
+ for (i = 0; i < TX_RING_SIZE; i++)
+ printk(KERN_DEBUG "%s: %c%c%2d %8.8x.\n", dev->name,
+ i == sp->dirty_tx % TX_RING_SIZE ? '*' : ' ',
+ i == sp->cur_tx % TX_RING_SIZE ? '=' : ' ',
+ i, sp->tx_ring[i].status);
+
+ printk(KERN_DEBUG "%s: Printing Rx ring"
+ " (next to receive into %u, dirty index %u).\n",
+ dev->name, sp->cur_rx, sp->dirty_rx);
+ for (i = 0; i < RX_RING_SIZE; i++)
+ printk(KERN_DEBUG "%s: %c%c%c%2d %8.8x.\n", dev->name,
+ sp->rx_ringp[i] == sp->last_rxf ? 'l' : ' ',
+ i == sp->dirty_rx % RX_RING_SIZE ? '*' : ' ',
+ i == sp->cur_rx % RX_RING_SIZE ? '=' : ' ',
+ i, (sp->rx_ringp[i] != NULL) ?
+ (unsigned)sp->rx_ringp[i]->status : 0);
+ }
+
+#if 0
+ {
+ void __iomem *ioaddr = sp->regs;
+ int phy_num = sp->phy[0] & 0x1f;
+ for (i = 0; i < 16; i++) {
+ /* FIXME: what does it mean? --SAW */
+ if (i == 6) i = 21;
+ printk(KERN_DEBUG "%s: PHY index %d register %d is %4.4x.\n",
+ dev->name, phy_num, i, mdio_read(dev, phy_num, i));
+ }
+ }
+#endif
+
+}
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void
+speedo_init_rx_ring(struct net_device *dev)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ struct RxFD *rxf, *last_rxf = NULL;
+ dma_addr_t last_rxf_dma = 0 /* to shut up the compiler */;
+ int i;
+
+ sp->cur_rx = 0;
+
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ struct sk_buff *skb;
+ skb = dev_alloc_skb(PKT_BUF_SZ + sizeof(struct RxFD));
+ /* XXX: do we really want to call this before the NULL check? --hch */
+ rx_align(skb); /* Align IP on 16 byte boundary */
+ sp->rx_skbuff[i] = skb;
+ if (skb == NULL)
+ break; /* OK. Just initially short of Rx bufs. */
+ skb->dev = dev; /* Mark as being used by this device. */
+ rxf = (struct RxFD *)skb->tail;
+ sp->rx_ringp[i] = rxf;
+ sp->rx_ring_dma[i] =
+ pci_map_single(sp->pdev, rxf,
+ PKT_BUF_SZ + sizeof(struct RxFD), PCI_DMA_BIDIRECTIONAL);
+ skb_reserve(skb, sizeof(struct RxFD));
+ if (last_rxf) {
+ last_rxf->link = cpu_to_le32(sp->rx_ring_dma[i]);
+ pci_dma_sync_single_for_device(sp->pdev, last_rxf_dma,
+ sizeof(struct RxFD), PCI_DMA_TODEVICE);
+ }
+ last_rxf = rxf;
+ last_rxf_dma = sp->rx_ring_dma[i];
+ rxf->status = cpu_to_le32(0x00000001); /* '1' is flag value only. */
+ rxf->link = 0; /* None yet. */
+ /* This field unused by i82557. */
+ rxf->rx_buf_addr = 0xffffffff;
+ rxf->count = cpu_to_le32(PKT_BUF_SZ << 16);
+ pci_dma_sync_single_for_device(sp->pdev, sp->rx_ring_dma[i],
+ sizeof(struct RxFD), PCI_DMA_TODEVICE);
+ }
+ sp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
+ /* Mark the last entry as end-of-list. */
+ last_rxf->status = cpu_to_le32(0xC0000002); /* '2' is flag value only. */
+ pci_dma_sync_single_for_device(sp->pdev, sp->rx_ring_dma[RX_RING_SIZE-1],
+ sizeof(struct RxFD), PCI_DMA_TODEVICE);
+ sp->last_rxf = last_rxf;
+ sp->last_rxf_dma = last_rxf_dma;
+}
+
+static void speedo_purge_tx(struct net_device *dev)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ int entry;
+
+ while ((int)(sp->cur_tx - sp->dirty_tx) > 0) {
+ entry = sp->dirty_tx % TX_RING_SIZE;
+ if (sp->tx_skbuff[entry]) {
+ sp->stats.tx_errors++;
+ pci_unmap_single(sp->pdev,
+ le32_to_cpu(sp->tx_ring[entry].tx_buf_addr0),
+ sp->tx_skbuff[entry]->len, PCI_DMA_TODEVICE);
+ dev_kfree_skb_irq(sp->tx_skbuff[entry]);
+ sp->tx_skbuff[entry] = NULL;
+ }
+ sp->dirty_tx++;
+ }
+ while (sp->mc_setup_head != NULL) {
+ struct speedo_mc_block *t;
+ if (netif_msg_tx_err(sp))
+ printk(KERN_DEBUG "%s: freeing mc frame.\n", dev->name);
+ pci_unmap_single(sp->pdev, sp->mc_setup_head->frame_dma,
+ sp->mc_setup_head->len, PCI_DMA_TODEVICE);
+ t = sp->mc_setup_head->next;
+ kfree(sp->mc_setup_head);
+ sp->mc_setup_head = t;
+ }
+ sp->mc_setup_tail = NULL;
+ sp->tx_full = 0;
+ netif_wake_queue(dev);
+}
+
+static void reset_mii(struct net_device *dev)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+
+ /* Reset the MII transceiver, suggested by Fred Young @ scalable.com. */
+ if ((sp->phy[0] & 0x8000) == 0) {
+ int phy_addr = sp->phy[0] & 0x1f;
+ int advertising = mdio_read(dev, phy_addr, MII_ADVERTISE);
+ int mii_bmcr = mdio_read(dev, phy_addr, MII_BMCR);
+ mdio_write(dev, phy_addr, MII_BMCR, 0x0400);
+ mdio_write(dev, phy_addr, MII_BMSR, 0x0000);
+ mdio_write(dev, phy_addr, MII_ADVERTISE, 0x0000);
+ mdio_write(dev, phy_addr, MII_BMCR, 0x8000);
+#ifdef honor_default_port
+ mdio_write(dev, phy_addr, MII_BMCR, mii_ctrl[dev->default_port & 7]);
+#else
+ mdio_read(dev, phy_addr, MII_BMCR);
+ mdio_write(dev, phy_addr, MII_BMCR, mii_bmcr);
+ mdio_write(dev, phy_addr, MII_ADVERTISE, advertising);
+#endif
+ }
+}
+
+static void speedo_tx_timeout(struct net_device *dev)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ void __iomem *ioaddr = sp->regs;
+ int status = ioread16(ioaddr + SCBStatus);
+ unsigned long flags;
+
+ if (netif_msg_tx_err(sp)) {
+ printk(KERN_WARNING "%s: Transmit timed out: status %4.4x "
+ " %4.4x at %d/%d command %8.8x.\n",
+ dev->name, status, ioread16(ioaddr + SCBCmd),
+ sp->dirty_tx, sp->cur_tx,
+ sp->tx_ring[sp->dirty_tx % TX_RING_SIZE].status);
+
+ }
+ speedo_show_state(dev);
+#if 0
+ if ((status & 0x00C0) != 0x0080
+ && (status & 0x003C) == 0x0010) {
+ /* Only the command unit has stopped. */
+ printk(KERN_WARNING "%s: Trying to restart the transmitter...\n",
+ dev->name);
+ iowrite32(TX_RING_ELEM_DMA(sp, dirty_tx % TX_RING_SIZE]),
+ ioaddr + SCBPointer);
+ iowrite16(CUStart, ioaddr + SCBCmd);
+ reset_mii(dev);
+ } else {
+#else
+ {
+#endif
+ del_timer_sync(&sp->timer);
+ /* Reset the Tx and Rx units. */
+ iowrite32(PortReset, ioaddr + SCBPort);
+ /* We may get spurious interrupts here. But I don't think that they
+ may do much harm. 1999/12/09 SAW */
+ udelay(10);
+ /* Disable interrupts. */
+ iowrite16(SCBMaskAll, ioaddr + SCBCmd);
+ synchronize_irq(dev->irq);
+ speedo_tx_buffer_gc(dev);
+ /* Free as much as possible.
+ It helps to recover from a hang because of out-of-memory.
+ It also simplifies speedo_resume() in case TX ring is full or
+ close-to-be full. */
+ speedo_purge_tx(dev);
+ speedo_refill_rx_buffers(dev, 1);
+ spin_lock_irqsave(&sp->lock, flags);
+ speedo_resume(dev);
+ sp->rx_mode = -1;
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&sp->lock, flags);
+ set_rx_mode(dev); /* it takes the spinlock itself --SAW */
+ /* Reset MII transceiver. Do it before starting the timer to serialize
+ mdio_xxx operations. Yes, it's a paranoya :-) 2000/05/09 SAW */
+ reset_mii(dev);
+ sp->timer.expires = RUN_AT(2*HZ);
+ add_timer(&sp->timer);
+ }
+ return;
+}
+
+static int
+speedo_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ void __iomem *ioaddr = sp->regs;
+ int entry;
+
+ /* Prevent interrupts from changing the Tx ring from underneath us. */
+ unsigned long flags;
+
+ spin_lock_irqsave(&sp->lock, flags);
+
+ /* Check if there are enough space. */
+ if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
+ printk(KERN_ERR "%s: incorrect tbusy state, fixed.\n", dev->name);
+ netif_stop_queue(dev);
+ sp->tx_full = 1;
+ spin_unlock_irqrestore(&sp->lock, flags);
+ return 1;
+ }
+
+ /* Calculate the Tx descriptor entry. */
+ entry = sp->cur_tx++ % TX_RING_SIZE;
+
+ sp->tx_skbuff[entry] = skb;
+ sp->tx_ring[entry].status =
+ cpu_to_le32(CmdSuspend | CmdTx | CmdTxFlex);
+ if (!(entry & ((TX_RING_SIZE>>2)-1)))
+ sp->tx_ring[entry].status |= cpu_to_le32(CmdIntr);
+ sp->tx_ring[entry].link =
+ cpu_to_le32(TX_RING_ELEM_DMA(sp, sp->cur_tx % TX_RING_SIZE));
+ sp->tx_ring[entry].tx_desc_addr =
+ cpu_to_le32(TX_RING_ELEM_DMA(sp, entry) + TX_DESCR_BUF_OFFSET);
+ /* The data region is always in one buffer descriptor. */
+ sp->tx_ring[entry].count = cpu_to_le32(sp->tx_threshold);
+ sp->tx_ring[entry].tx_buf_addr0 =
+ cpu_to_le32(pci_map_single(sp->pdev, skb->data,
+ skb->len, PCI_DMA_TODEVICE));
+ sp->tx_ring[entry].tx_buf_size0 = cpu_to_le32(skb->len);
+
+ /* workaround for hardware bug on 10 mbit half duplex */
+
+ if ((sp->partner == 0) && (sp->chip_id == 1)) {
+ wait_for_cmd_done(dev, sp);
+ iowrite8(0 , ioaddr + SCBCmd);
+ udelay(1);
+ }
+
+ /* Trigger the command unit resume. */
+ wait_for_cmd_done(dev, sp);
+ clear_suspend(sp->last_cmd);
+ /* We want the time window between clearing suspend flag on the previous
+ command and resuming CU to be as small as possible.
+ Interrupts in between are very undesired. --SAW */
+ iowrite8(CUResume, ioaddr + SCBCmd);
+ sp->last_cmd = (struct descriptor *)&sp->tx_ring[entry];
+
+ /* Leave room for set_rx_mode(). If there is no more space than reserved
+ for multicast filter mark the ring as full. */
+ if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
+ netif_stop_queue(dev);
+ sp->tx_full = 1;
+ }
+
+ spin_unlock_irqrestore(&sp->lock, flags);
+
+ dev->trans_start = jiffies;
+
+ return 0;
+}
+
+static void speedo_tx_buffer_gc(struct net_device *dev)
+{
+ unsigned int dirty_tx;
+ struct speedo_private *sp = netdev_priv(dev);
+
+ dirty_tx = sp->dirty_tx;
+ while ((int)(sp->cur_tx - dirty_tx) > 0) {
+ int entry = dirty_tx % TX_RING_SIZE;
+ int status = le32_to_cpu(sp->tx_ring[entry].status);
+
+ if (netif_msg_tx_done(sp))
+ printk(KERN_DEBUG " scavenge candidate %d status %4.4x.\n",
+ entry, status);
+ if ((status & StatusComplete) == 0)
+ break; /* It still hasn't been processed. */
+ if (status & TxUnderrun)
+ if (sp->tx_threshold < 0x01e08000) {
+ if (netif_msg_tx_err(sp))
+ printk(KERN_DEBUG "%s: TX underrun, threshold adjusted.\n",
+ dev->name);
+ sp->tx_threshold += 0x00040000;
+ }
+ /* Free the original skb. */
+ if (sp->tx_skbuff[entry]) {
+ sp->stats.tx_packets++; /* Count only user packets. */
+ sp->stats.tx_bytes += sp->tx_skbuff[entry]->len;
+ pci_unmap_single(sp->pdev,
+ le32_to_cpu(sp->tx_ring[entry].tx_buf_addr0),
+ sp->tx_skbuff[entry]->len, PCI_DMA_TODEVICE);
+ dev_kfree_skb_irq(sp->tx_skbuff[entry]);
+ sp->tx_skbuff[entry] = NULL;
+ }
+ dirty_tx++;
+ }
+
+ if (netif_msg_tx_err(sp) && (int)(sp->cur_tx - dirty_tx) > TX_RING_SIZE) {
+ printk(KERN_ERR "out-of-sync dirty pointer, %d vs. %d,"
+ " full=%d.\n",
+ dirty_tx, sp->cur_tx, sp->tx_full);
+ dirty_tx += TX_RING_SIZE;
+ }
+
+ while (sp->mc_setup_head != NULL
+ && (int)(dirty_tx - sp->mc_setup_head->tx - 1) > 0) {
+ struct speedo_mc_block *t;
+ if (netif_msg_tx_err(sp))
+ printk(KERN_DEBUG "%s: freeing mc frame.\n", dev->name);
+ pci_unmap_single(sp->pdev, sp->mc_setup_head->frame_dma,
+ sp->mc_setup_head->len, PCI_DMA_TODEVICE);
+ t = sp->mc_setup_head->next;
+ kfree(sp->mc_setup_head);
+ sp->mc_setup_head = t;
+ }
+ if (sp->mc_setup_head == NULL)
+ sp->mc_setup_tail = NULL;
+
+ sp->dirty_tx = dirty_tx;
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+ after the Tx thread. */
+static irqreturn_t speedo_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *)dev_instance;
+ struct speedo_private *sp;
+ void __iomem *ioaddr;
+ long boguscnt = max_interrupt_work;
+ unsigned short status;
+ unsigned int handled = 0;
+
+ sp = netdev_priv(dev);
+ ioaddr = sp->regs;
+
+#ifndef final_version
+ /* A lock to prevent simultaneous entry on SMP machines. */
+ if (test_and_set_bit(0, (void*)&sp->in_interrupt)) {
+ printk(KERN_ERR"%s: SMP simultaneous entry of an interrupt handler.\n",
+ dev->name);
+ sp->in_interrupt = 0; /* Avoid halting machine. */
+ return IRQ_NONE;
+ }
+#endif
+
+ do {
+ status = ioread16(ioaddr + SCBStatus);
+ /* Acknowledge all of the current interrupt sources ASAP. */
+ /* Will change from 0xfc00 to 0xff00 when we start handling
+ FCP and ER interrupts --Dragan */
+ iowrite16(status & 0xfc00, ioaddr + SCBStatus);
+
+ if (netif_msg_intr(sp))
+ printk(KERN_DEBUG "%s: interrupt status=%#4.4x.\n",
+ dev->name, status);
+
+ if ((status & 0xfc00) == 0)
+ break;
+ handled = 1;
+
+
+ if ((status & 0x5000) || /* Packet received, or Rx error. */
+ (sp->rx_ring_state&(RrNoMem|RrPostponed)) == RrPostponed)
+ /* Need to gather the postponed packet. */
+ speedo_rx(dev);
+
+ /* Always check if all rx buffers are allocated. --SAW */
+ speedo_refill_rx_buffers(dev, 0);
+
+ spin_lock(&sp->lock);
+ /*
+ * The chip may have suspended reception for various reasons.
+ * Check for that, and re-prime it should this be the case.
+ */
+ switch ((status >> 2) & 0xf) {
+ case 0: /* Idle */
+ break;
+ case 1: /* Suspended */
+ case 2: /* No resources (RxFDs) */
+ case 9: /* Suspended with no more RBDs */
+ case 10: /* No resources due to no RBDs */
+ case 12: /* Ready with no RBDs */
+ speedo_rx_soft_reset(dev);
+ break;
+ case 3: case 5: case 6: case 7: case 8:
+ case 11: case 13: case 14: case 15:
+ /* these are all reserved values */
+ break;
+ }
+
+
+ /* User interrupt, Command/Tx unit interrupt or CU not active. */
+ if (status & 0xA400) {
+ speedo_tx_buffer_gc(dev);
+ if (sp->tx_full
+ && (int)(sp->cur_tx - sp->dirty_tx) < TX_QUEUE_UNFULL) {
+ /* The ring is no longer full. */
+ sp->tx_full = 0;
+ netif_wake_queue(dev); /* Attention: under a spinlock. --SAW */
+ }
+ }
+
+ spin_unlock(&sp->lock);
+
+ if (--boguscnt < 0) {
+ printk(KERN_ERR "%s: Too much work at interrupt, status=0x%4.4x.\n",
+ dev->name, status);
+ /* Clear all interrupt sources. */
+ /* Will change from 0xfc00 to 0xff00 when we start handling
+ FCP and ER interrupts --Dragan */
+ iowrite16(0xfc00, ioaddr + SCBStatus);
+ break;
+ }
+ } while (1);
+
+ if (netif_msg_intr(sp))
+ printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n",
+ dev->name, ioread16(ioaddr + SCBStatus));
+
+ clear_bit(0, (void*)&sp->in_interrupt);
+ return IRQ_RETVAL(handled);
+}
+
+static inline struct RxFD *speedo_rx_alloc(struct net_device *dev, int entry)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ struct RxFD *rxf;
+ struct sk_buff *skb;
+ /* Get a fresh skbuff to replace the consumed one. */
+ skb = dev_alloc_skb(PKT_BUF_SZ + sizeof(struct RxFD));
+ /* XXX: do we really want to call this before the NULL check? --hch */
+ rx_align(skb); /* Align IP on 16 byte boundary */
+ sp->rx_skbuff[entry] = skb;
+ if (skb == NULL) {
+ sp->rx_ringp[entry] = NULL;
+ return NULL;
+ }
+ rxf = sp->rx_ringp[entry] = (struct RxFD *)skb->tail;
+ sp->rx_ring_dma[entry] =
+ pci_map_single(sp->pdev, rxf,
+ PKT_BUF_SZ + sizeof(struct RxFD), PCI_DMA_FROMDEVICE);
+ skb->dev = dev;
+ skb_reserve(skb, sizeof(struct RxFD));
+ rxf->rx_buf_addr = 0xffffffff;
+ pci_dma_sync_single_for_device(sp->pdev, sp->rx_ring_dma[entry],
+ sizeof(struct RxFD), PCI_DMA_TODEVICE);
+ return rxf;
+}
+
+static inline void speedo_rx_link(struct net_device *dev, int entry,
+ struct RxFD *rxf, dma_addr_t rxf_dma)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ rxf->status = cpu_to_le32(0xC0000001); /* '1' for driver use only. */
+ rxf->link = 0; /* None yet. */
+ rxf->count = cpu_to_le32(PKT_BUF_SZ << 16);
+ sp->last_rxf->link = cpu_to_le32(rxf_dma);
+ sp->last_rxf->status &= cpu_to_le32(~0xC0000000);
+ pci_dma_sync_single_for_device(sp->pdev, sp->last_rxf_dma,
+ sizeof(struct RxFD), PCI_DMA_TODEVICE);
+ sp->last_rxf = rxf;
+ sp->last_rxf_dma = rxf_dma;
+}
+
+static int speedo_refill_rx_buf(struct net_device *dev, int force)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ int entry;
+ struct RxFD *rxf;
+
+ entry = sp->dirty_rx % RX_RING_SIZE;
+ if (sp->rx_skbuff[entry] == NULL) {
+ rxf = speedo_rx_alloc(dev, entry);
+ if (rxf == NULL) {
+ unsigned int forw;
+ int forw_entry;
+ if (netif_msg_rx_err(sp) || !(sp->rx_ring_state & RrOOMReported)) {
+ printk(KERN_WARNING "%s: can't fill rx buffer (force %d)!\n",
+ dev->name, force);
+ sp->rx_ring_state |= RrOOMReported;
+ }
+ speedo_show_state(dev);
+ if (!force)
+ return -1; /* Better luck next time! */
+ /* Borrow an skb from one of next entries. */
+ for (forw = sp->dirty_rx + 1; forw != sp->cur_rx; forw++)
+ if (sp->rx_skbuff[forw % RX_RING_SIZE] != NULL)
+ break;
+ if (forw == sp->cur_rx)
+ return -1;
+ forw_entry = forw % RX_RING_SIZE;
+ sp->rx_skbuff[entry] = sp->rx_skbuff[forw_entry];
+ sp->rx_skbuff[forw_entry] = NULL;
+ rxf = sp->rx_ringp[forw_entry];
+ sp->rx_ringp[forw_entry] = NULL;
+ sp->rx_ringp[entry] = rxf;
+ }
+ } else {
+ rxf = sp->rx_ringp[entry];
+ }
+ speedo_rx_link(dev, entry, rxf, sp->rx_ring_dma[entry]);
+ sp->dirty_rx++;
+ sp->rx_ring_state &= ~(RrNoMem|RrOOMReported); /* Mark the progress. */
+ return 0;
+}
+
+static void speedo_refill_rx_buffers(struct net_device *dev, int force)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+
+ /* Refill the RX ring. */
+ while ((int)(sp->cur_rx - sp->dirty_rx) > 0 &&
+ speedo_refill_rx_buf(dev, force) != -1);
+}
+
+static int
+speedo_rx(struct net_device *dev)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ int entry = sp->cur_rx % RX_RING_SIZE;
+ int rx_work_limit = sp->dirty_rx + RX_RING_SIZE - sp->cur_rx;
+ int alloc_ok = 1;
+ int npkts = 0;
+
+ if (netif_msg_intr(sp))
+ printk(KERN_DEBUG " In speedo_rx().\n");
+ /* If we own the next entry, it's a new packet. Send it up. */
+ while (sp->rx_ringp[entry] != NULL) {
+ int status;
+ int pkt_len;
+
+ pci_dma_sync_single_for_cpu(sp->pdev, sp->rx_ring_dma[entry],
+ sizeof(struct RxFD), PCI_DMA_FROMDEVICE);
+ status = le32_to_cpu(sp->rx_ringp[entry]->status);
+ pkt_len = le32_to_cpu(sp->rx_ringp[entry]->count) & 0x3fff;
+
+ if (!(status & RxComplete))
+ break;
+
+ if (--rx_work_limit < 0)
+ break;
+
+ /* Check for a rare out-of-memory case: the current buffer is
+ the last buffer allocated in the RX ring. --SAW */
+ if (sp->last_rxf == sp->rx_ringp[entry]) {
+ /* Postpone the packet. It'll be reaped at an interrupt when this
+ packet is no longer the last packet in the ring. */
+ if (netif_msg_rx_err(sp))
+ printk(KERN_DEBUG "%s: RX packet postponed!\n",
+ dev->name);
+ sp->rx_ring_state |= RrPostponed;
+ break;
+ }
+
+ if (netif_msg_rx_status(sp))
+ printk(KERN_DEBUG " speedo_rx() status %8.8x len %d.\n", status,
+ pkt_len);
+ if ((status & (RxErrTooBig|RxOK|0x0f90)) != RxOK) {
+ if (status & RxErrTooBig)
+ printk(KERN_ERR "%s: Ethernet frame overran the Rx buffer, "
+ "status %8.8x!\n", dev->name, status);
+ else if (! (status & RxOK)) {
+ /* There was a fatal error. This *should* be impossible. */
+ sp->stats.rx_errors++;
+ printk(KERN_ERR "%s: Anomalous event in speedo_rx(), "
+ "status %8.8x.\n",
+ dev->name, status);
+ }
+ } else {
+ struct sk_buff *skb;
+
+ /* Check if the packet is long enough to just accept without
+ copying to a properly sized skbuff. */
+ if (pkt_len < rx_copybreak
+ && (skb = dev_alloc_skb(pkt_len + 2)) != 0) {
+ skb->dev = dev;
+ skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
+ /* 'skb_put()' points to the start of sk_buff data area. */
+ pci_dma_sync_single_for_cpu(sp->pdev, sp->rx_ring_dma[entry],
+ sizeof(struct RxFD) + pkt_len,
+ PCI_DMA_FROMDEVICE);
+
+#if 1 || USE_IP_CSUM
+ /* Packet is in one chunk -- we can copy + cksum. */
+ eth_copy_and_sum(skb, sp->rx_skbuff[entry]->tail, pkt_len, 0);
+ skb_put(skb, pkt_len);
+#else
+ memcpy(skb_put(skb, pkt_len), sp->rx_skbuff[entry]->tail,
+ pkt_len);
+#endif
+ pci_dma_sync_single_for_device(sp->pdev, sp->rx_ring_dma[entry],
+ sizeof(struct RxFD) + pkt_len,
+ PCI_DMA_FROMDEVICE);
+ npkts++;
+ } else {
+ /* Pass up the already-filled skbuff. */
+ skb = sp->rx_skbuff[entry];
+ if (skb == NULL) {
+ printk(KERN_ERR "%s: Inconsistent Rx descriptor chain.\n",
+ dev->name);
+ break;
+ }
+ sp->rx_skbuff[entry] = NULL;
+ skb_put(skb, pkt_len);
+ npkts++;
+ sp->rx_ringp[entry] = NULL;
+ pci_unmap_single(sp->pdev, sp->rx_ring_dma[entry],
+ PKT_BUF_SZ + sizeof(struct RxFD),
+ PCI_DMA_FROMDEVICE);
+ }
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ dev->last_rx = jiffies;
+ sp->stats.rx_packets++;
+ sp->stats.rx_bytes += pkt_len;
+ }
+ entry = (++sp->cur_rx) % RX_RING_SIZE;
+ sp->rx_ring_state &= ~RrPostponed;
+ /* Refill the recently taken buffers.
+ Do it one-by-one to handle traffic bursts better. */
+ if (alloc_ok && speedo_refill_rx_buf(dev, 0) == -1)
+ alloc_ok = 0;
+ }
+
+ /* Try hard to refill the recently taken buffers. */
+ speedo_refill_rx_buffers(dev, 1);
+
+ if (npkts)
+ sp->last_rx_time = jiffies;
+
+ return 0;
+}
+
+static int
+speedo_close(struct net_device *dev)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ void __iomem *ioaddr = sp->regs;
+ int i;
+
+ netdevice_stop(dev);
+ netif_stop_queue(dev);
+
+ if (netif_msg_ifdown(sp))
+ printk(KERN_DEBUG "%s: Shutting down ethercard, status was %4.4x.\n",
+ dev->name, ioread16(ioaddr + SCBStatus));
+
+ /* Shut off the media monitoring timer. */
+ del_timer_sync(&sp->timer);
+
+ iowrite16(SCBMaskAll, ioaddr + SCBCmd);
+
+ /* Shutting down the chip nicely fails to disable flow control. So.. */
+ iowrite32(PortPartialReset, ioaddr + SCBPort);
+ ioread32(ioaddr + SCBPort); /* flush posted write */
+ /*
+ * The chip requires a 10 microsecond quiet period. Wait here!
+ */
+ udelay(10);
+
+ free_irq(dev->irq, dev);
+ speedo_show_state(dev);
+
+ /* Free all the skbuffs in the Rx and Tx queues. */
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ struct sk_buff *skb = sp->rx_skbuff[i];
+ sp->rx_skbuff[i] = NULL;
+ /* Clear the Rx descriptors. */
+ if (skb) {
+ pci_unmap_single(sp->pdev,
+ sp->rx_ring_dma[i],
+ PKT_BUF_SZ + sizeof(struct RxFD), PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(skb);
+ }
+ }
+
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ struct sk_buff *skb = sp->tx_skbuff[i];
+ sp->tx_skbuff[i] = NULL;
+ /* Clear the Tx descriptors. */
+ if (skb) {
+ pci_unmap_single(sp->pdev,
+ le32_to_cpu(sp->tx_ring[i].tx_buf_addr0),
+ skb->len, PCI_DMA_TODEVICE);
+ dev_kfree_skb(skb);
+ }
+ }
+
+ /* Free multicast setting blocks. */
+ for (i = 0; sp->mc_setup_head != NULL; i++) {
+ struct speedo_mc_block *t;
+ t = sp->mc_setup_head->next;
+ kfree(sp->mc_setup_head);
+ sp->mc_setup_head = t;
+ }
+ sp->mc_setup_tail = NULL;
+ if (netif_msg_ifdown(sp))
+ printk(KERN_DEBUG "%s: %d multicast blocks dropped.\n", dev->name, i);
+
+ pci_set_power_state(sp->pdev, PCI_D2);
+
+ return 0;
+}
+
+/* The Speedo-3 has an especially awkward and unusable method of getting
+ statistics out of the chip. It takes an unpredictable length of time
+ for the dump-stats command to complete. To avoid a busy-wait loop we
+ update the stats with the previous dump results, and then trigger a
+ new dump.
+
+ Oh, and incoming frames are dropped while executing dump-stats!
+ */
+static struct net_device_stats *
+speedo_get_stats(struct net_device *dev)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ void __iomem *ioaddr = sp->regs;
+
+ /* Update only if the previous dump finished. */
+ if (sp->lstats->done_marker == le32_to_cpu(0xA007)) {
+ sp->stats.tx_aborted_errors += le32_to_cpu(sp->lstats->tx_coll16_errs);
+ sp->stats.tx_window_errors += le32_to_cpu(sp->lstats->tx_late_colls);
+ sp->stats.tx_fifo_errors += le32_to_cpu(sp->lstats->tx_underruns);
+ sp->stats.tx_fifo_errors += le32_to_cpu(sp->lstats->tx_lost_carrier);
+ /*sp->stats.tx_deferred += le32_to_cpu(sp->lstats->tx_deferred);*/
+ sp->stats.collisions += le32_to_cpu(sp->lstats->tx_total_colls);
+ sp->stats.rx_crc_errors += le32_to_cpu(sp->lstats->rx_crc_errs);
+ sp->stats.rx_frame_errors += le32_to_cpu(sp->lstats->rx_align_errs);
+ sp->stats.rx_over_errors += le32_to_cpu(sp->lstats->rx_resource_errs);
+ sp->stats.rx_fifo_errors += le32_to_cpu(sp->lstats->rx_overrun_errs);
+ sp->stats.rx_length_errors += le32_to_cpu(sp->lstats->rx_runt_errs);
+ sp->lstats->done_marker = 0x0000;
+ if (netif_running(dev)) {
+ unsigned long flags;
+ /* Take a spinlock to make wait_for_cmd_done and sending the
+ command atomic. --SAW */
+ spin_lock_irqsave(&sp->lock, flags);
+ wait_for_cmd_done(dev, sp);
+ iowrite8(CUDumpStats, ioaddr + SCBCmd);
+ spin_unlock_irqrestore(&sp->lock, flags);
+ }
+ }
+ return &sp->stats;
+}
+
+static void speedo_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ strncpy(info->driver, "eepro100", sizeof(info->driver)-1);
+ strncpy(info->version, version, sizeof(info->version)-1);
+ if (sp->pdev)
+ strcpy(info->bus_info, pci_name(sp->pdev));
+}
+
+static int speedo_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ spin_lock_irq(&sp->lock);
+ mii_ethtool_gset(&sp->mii_if, ecmd);
+ spin_unlock_irq(&sp->lock);
+ return 0;
+}
+
+static int speedo_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ int res;
+ spin_lock_irq(&sp->lock);
+ res = mii_ethtool_sset(&sp->mii_if, ecmd);
+ spin_unlock_irq(&sp->lock);
+ return res;
+}
+
+static int speedo_nway_reset(struct net_device *dev)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ return mii_nway_restart(&sp->mii_if);
+}
+
+static u32 speedo_get_link(struct net_device *dev)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ return mii_link_ok(&sp->mii_if);
+}
+
+static u32 speedo_get_msglevel(struct net_device *dev)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ return sp->msg_enable;
+}
+
+static void speedo_set_msglevel(struct net_device *dev, u32 v)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ sp->msg_enable = v;
+}
+
+static struct ethtool_ops ethtool_ops = {
+ .get_drvinfo = speedo_get_drvinfo,
+ .get_settings = speedo_get_settings,
+ .set_settings = speedo_set_settings,
+ .nway_reset = speedo_nway_reset,
+ .get_link = speedo_get_link,
+ .get_msglevel = speedo_get_msglevel,
+ .set_msglevel = speedo_set_msglevel,
+};
+
+static int speedo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ struct mii_ioctl_data *data = if_mii(rq);
+ int phy = sp->phy[0] & 0x1f;
+ int saved_acpi;
+ int t;
+
+ switch(cmd) {
+ case SIOCGMIIPHY: /* Get address of MII PHY in use. */
+ data->phy_id = phy;
+
+ case SIOCGMIIREG: /* Read MII PHY register. */
+ /* FIXME: these operations need to be serialized with MDIO
+ access from the timeout handler.
+ They are currently serialized only with MDIO access from the
+ timer routine. 2000/05/09 SAW */
+ saved_acpi = pci_set_power_state(sp->pdev, PCI_D0);
+ t = del_timer_sync(&sp->timer);
+ data->val_out = mdio_read(dev, data->phy_id & 0x1f, data->reg_num & 0x1f);
+ if (t)
+ add_timer(&sp->timer); /* may be set to the past --SAW */
+ pci_set_power_state(sp->pdev, saved_acpi);
+ return 0;
+
+ case SIOCSMIIREG: /* Write MII PHY register. */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ saved_acpi = pci_set_power_state(sp->pdev, PCI_D0);
+ t = del_timer_sync(&sp->timer);
+ mdio_write(dev, data->phy_id, data->reg_num, data->val_in);
+ if (t)
+ add_timer(&sp->timer); /* may be set to the past --SAW */
+ pci_set_power_state(sp->pdev, saved_acpi);
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+/* Set or clear the multicast filter for this adaptor.
+ This is very ugly with Intel chips -- we usually have to execute an
+ entire configuration command, plus process a multicast command.
+ This is complicated. We must put a large configuration command and
+ an arbitrarily-sized multicast command in the transmit list.
+ To minimize the disruption -- the previous command might have already
+ loaded the link -- we convert the current command block, normally a Tx
+ command, into a no-op and link it to the new command.
+*/
+static void set_rx_mode(struct net_device *dev)
+{
+ struct speedo_private *sp = netdev_priv(dev);
+ void __iomem *ioaddr = sp->regs;
+ struct descriptor *last_cmd;
+ char new_rx_mode;
+ unsigned long flags;
+ int entry, i;
+
+ if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
+ new_rx_mode = 3;
+ } else if ((dev->flags & IFF_ALLMULTI) ||
+ dev->mc_count > multicast_filter_limit) {
+ new_rx_mode = 1;
+ } else
+ new_rx_mode = 0;
+
+ if (netif_msg_rx_status(sp))
+ printk(KERN_DEBUG "%s: set_rx_mode %d -> %d\n", dev->name,
+ sp->rx_mode, new_rx_mode);
+
+ if ((int)(sp->cur_tx - sp->dirty_tx) > TX_RING_SIZE - TX_MULTICAST_SIZE) {
+ /* The Tx ring is full -- don't add anything! Hope the mode will be
+ * set again later. */
+ sp->rx_mode = -1;
+ return;
+ }
+
+ if (new_rx_mode != sp->rx_mode) {
+ u8 *config_cmd_data;
+
+ spin_lock_irqsave(&sp->lock, flags);
+ entry = sp->cur_tx++ % TX_RING_SIZE;
+ last_cmd = sp->last_cmd;
+ sp->last_cmd = (struct descriptor *)&sp->tx_ring[entry];
+
+ sp->tx_skbuff[entry] = NULL; /* Redundant. */
+ sp->tx_ring[entry].status = cpu_to_le32(CmdSuspend | CmdConfigure);
+ sp->tx_ring[entry].link =
+ cpu_to_le32(TX_RING_ELEM_DMA(sp, (entry + 1) % TX_RING_SIZE));
+ config_cmd_data = (void *)&sp->tx_ring[entry].tx_desc_addr;
+ /* Construct a full CmdConfig frame. */
+ memcpy(config_cmd_data, i82558_config_cmd, CONFIG_DATA_SIZE);
+ config_cmd_data[1] = (txfifo << 4) | rxfifo;
+ config_cmd_data[4] = rxdmacount;
+ config_cmd_data[5] = txdmacount + 0x80;
+ config_cmd_data[15] |= (new_rx_mode & 2) ? 1 : 0;
+ /* 0x80 doesn't disable FC 0x84 does.
+ Disable Flow control since we are not ACK-ing any FC interrupts
+ for now. --Dragan */
+ config_cmd_data[19] = 0x84;
+ config_cmd_data[19] |= sp->mii_if.full_duplex ? 0x40 : 0;
+ config_cmd_data[21] = (new_rx_mode & 1) ? 0x0D : 0x05;
+ if (sp->phy[0] & 0x8000) { /* Use the AUI port instead. */
+ config_cmd_data[15] |= 0x80;
+ config_cmd_data[8] = 0;
+ }
+ /* Trigger the command unit resume. */
+ wait_for_cmd_done(dev, sp);
+ clear_suspend(last_cmd);
+ iowrite8(CUResume, ioaddr + SCBCmd);
+ if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
+ netif_stop_queue(dev);
+ sp->tx_full = 1;
+ }
+ spin_unlock_irqrestore(&sp->lock, flags);
+ }
+
+ if (new_rx_mode == 0 && dev->mc_count < 4) {
+ /* The simple case of 0-3 multicast list entries occurs often, and
+ fits within one tx_ring[] entry. */
+ struct dev_mc_list *mclist;
+ u16 *setup_params, *eaddrs;
+
+ spin_lock_irqsave(&sp->lock, flags);
+ entry = sp->cur_tx++ % TX_RING_SIZE;
+ last_cmd = sp->last_cmd;
+ sp->last_cmd = (struct descriptor *)&sp->tx_ring[entry];
+
+ sp->tx_skbuff[entry] = NULL;
+ sp->tx_ring[entry].status = cpu_to_le32(CmdSuspend | CmdMulticastList);
+ sp->tx_ring[entry].link =
+ cpu_to_le32(TX_RING_ELEM_DMA(sp, (entry + 1) % TX_RING_SIZE));
+ sp->tx_ring[entry].tx_desc_addr = 0; /* Really MC list count. */
+ setup_params = (u16 *)&sp->tx_ring[entry].tx_desc_addr;
+ *setup_params++ = cpu_to_le16(dev->mc_count*6);
+ /* Fill in the multicast addresses. */
+ for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
+ i++, mclist = mclist->next) {
+ eaddrs = (u16 *)mclist->dmi_addr;
+ *setup_params++ = *eaddrs++;
+ *setup_params++ = *eaddrs++;
+ *setup_params++ = *eaddrs++;
+ }
+
+ wait_for_cmd_done(dev, sp);
+ clear_suspend(last_cmd);
+ /* Immediately trigger the command unit resume. */
+ iowrite8(CUResume, ioaddr + SCBCmd);
+
+ if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
+ netif_stop_queue(dev);
+ sp->tx_full = 1;
+ }
+ spin_unlock_irqrestore(&sp->lock, flags);
+ } else if (new_rx_mode == 0) {
+ struct dev_mc_list *mclist;
+ u16 *setup_params, *eaddrs;
+ struct speedo_mc_block *mc_blk;
+ struct descriptor *mc_setup_frm;
+ int i;
+
+ mc_blk = kmalloc(sizeof(*mc_blk) + 2 + multicast_filter_limit*6,
+ GFP_ATOMIC);
+ if (mc_blk == NULL) {
+ printk(KERN_ERR "%s: Failed to allocate a setup frame.\n",
+ dev->name);
+ sp->rx_mode = -1; /* We failed, try again. */
+ return;
+ }
+ mc_blk->next = NULL;
+ mc_blk->len = 2 + multicast_filter_limit*6;
+ mc_blk->frame_dma =
+ pci_map_single(sp->pdev, &mc_blk->frame, mc_blk->len,
+ PCI_DMA_TODEVICE);
+ mc_setup_frm = &mc_blk->frame;
+
+ /* Fill the setup frame. */
+ if (netif_msg_ifup(sp))
+ printk(KERN_DEBUG "%s: Constructing a setup frame at %p.\n",
+ dev->name, mc_setup_frm);
+ mc_setup_frm->cmd_status =
+ cpu_to_le32(CmdSuspend | CmdIntr | CmdMulticastList);
+ /* Link set below. */
+ setup_params = (u16 *)&mc_setup_frm->params;
+ *setup_params++ = cpu_to_le16(dev->mc_count*6);
+ /* Fill in the multicast addresses. */
+ for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
+ i++, mclist = mclist->next) {
+ eaddrs = (u16 *)mclist->dmi_addr;
+ *setup_params++ = *eaddrs++;
+ *setup_params++ = *eaddrs++;
+ *setup_params++ = *eaddrs++;
+ }
+
+ /* Disable interrupts while playing with the Tx Cmd list. */
+ spin_lock_irqsave(&sp->lock, flags);
+
+ if (sp->mc_setup_tail)
+ sp->mc_setup_tail->next = mc_blk;
+ else
+ sp->mc_setup_head = mc_blk;
+ sp->mc_setup_tail = mc_blk;
+ mc_blk->tx = sp->cur_tx;
+
+ entry = sp->cur_tx++ % TX_RING_SIZE;
+ last_cmd = sp->last_cmd;
+ sp->last_cmd = mc_setup_frm;
+
+ /* Change the command to a NoOp, pointing to the CmdMulti command. */
+ sp->tx_skbuff[entry] = NULL;
+ sp->tx_ring[entry].status = cpu_to_le32(CmdNOp);
+ sp->tx_ring[entry].link = cpu_to_le32(mc_blk->frame_dma);
+
+ /* Set the link in the setup frame. */
+ mc_setup_frm->link =
+ cpu_to_le32(TX_RING_ELEM_DMA(sp, (entry + 1) % TX_RING_SIZE));
+
+ pci_dma_sync_single_for_device(sp->pdev, mc_blk->frame_dma,
+ mc_blk->len, PCI_DMA_TODEVICE);
+
+ wait_for_cmd_done(dev, sp);
+ clear_suspend(last_cmd);
+ /* Immediately trigger the command unit resume. */
+ iowrite8(CUResume, ioaddr + SCBCmd);
+
+ if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
+ netif_stop_queue(dev);
+ sp->tx_full = 1;
+ }
+ spin_unlock_irqrestore(&sp->lock, flags);
+
+ if (netif_msg_rx_status(sp))
+ printk(" CmdMCSetup frame length %d in entry %d.\n",
+ dev->mc_count, entry);
+ }
+
+ sp->rx_mode = new_rx_mode;
+}
+
+#ifdef CONFIG_PM
+static int eepro100_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct speedo_private *sp = netdev_priv(dev);
+ void __iomem *ioaddr = sp->regs;
+
+ pci_save_state(pdev);
+
+ if (!netif_running(dev))
+ return 0;
+
+ del_timer_sync(&sp->timer);
+
+ netif_device_detach(dev);
+ iowrite32(PortPartialReset, ioaddr + SCBPort);
+
+ /* XXX call pci_set_power_state ()? */
+ pci_disable_device(pdev);
+ pci_set_power_state (pdev, PCI_D3hot);
+ return 0;
+}
+
+static int eepro100_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct speedo_private *sp = netdev_priv(dev);
+ void __iomem *ioaddr = sp->regs;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_enable_device(pdev);
+ pci_set_master(pdev);
+
+ if (!netif_running(dev))
+ return 0;
+
+ /* I'm absolutely uncertain if this part of code may work.
+ The problems are:
+ - correct hardware reinitialization;
+ - correct driver behavior between different steps of the
+ reinitialization;
+ - serialization with other driver calls.
+ 2000/03/08 SAW */
+ iowrite16(SCBMaskAll, ioaddr + SCBCmd);
+ speedo_resume(dev);
+ netif_device_attach(dev);
+ sp->rx_mode = -1;
+ sp->flow_ctrl = sp->partner = 0;
+ set_rx_mode(dev);
+ sp->timer.expires = RUN_AT(2*HZ);
+ add_timer(&sp->timer);
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+static void __devexit eepro100_remove_one (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct speedo_private *sp = netdev_priv(dev);
+
+ unregister_netdev(dev);
+
+ release_region(pci_resource_start(pdev, 1), pci_resource_len(pdev, 1));
+ release_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
+
+ pci_iounmap(pdev, sp->regs);
+ pci_free_consistent(pdev, TX_RING_SIZE * sizeof(struct TxFD)
+ + sizeof(struct speedo_stats),
+ sp->tx_ring, sp->tx_ring_dma);
+ pci_disable_device(pdev);
+ free_netdev(dev);
+}
+
+static struct pci_device_id eepro100_pci_tbl[] = {
+ { PCI_VENDOR_ID_INTEL, 0x1229, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x1209, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x1029, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x1030, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x1031, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x1032, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x1033, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x1034, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x1035, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x1036, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x1037, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x1038, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x1039, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x103A, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x103B, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x103C, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x103D, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x103E, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x1050, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x1059, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x1227, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x2449, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x2459, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x245D, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x5200, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, 0x5201, PCI_ANY_ID, PCI_ANY_ID, },
+ { 0,}
+};
+MODULE_DEVICE_TABLE(pci, eepro100_pci_tbl);
+
+static struct pci_driver eepro100_driver = {
+ .name = "eepro100",
+ .id_table = eepro100_pci_tbl,
+ .probe = eepro100_init_one,
+ .remove = __devexit_p(eepro100_remove_one),
+#ifdef CONFIG_PM
+ .suspend = eepro100_suspend,
+ .resume = eepro100_resume,
+#endif /* CONFIG_PM */
+};
+
+static int __init eepro100_init_module(void)
+{
+#ifdef MODULE
+ printk(version);
+#endif
+ return pci_module_init(&eepro100_driver);
+}
+
+static void __exit eepro100_cleanup_module(void)
+{
+ pci_unregister_driver(&eepro100_driver);
+}
+
+module_init(eepro100_init_module);
+module_exit(eepro100_cleanup_module);
+
+/*
+ * Local variables:
+ * compile-command: "gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -c eepro100.c `[ -f /usr/include/linux/modversions.h ] && echo -DMODVERSIONS`"
+ * c-indent-level: 4
+ * c-basic-offset: 4
+ * tab-width: 4
+ * End:
+ */