summaryrefslogtreecommitdiffstats
path: root/drivers/net/ioc3-eth.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ioc3-eth.c')
-rw-r--r--drivers/net/ioc3-eth.c1653
1 files changed, 1653 insertions, 0 deletions
diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
new file mode 100644
index 000000000000..d520b5920d6c
--- /dev/null
+++ b/drivers/net/ioc3-eth.c
@@ -0,0 +1,1653 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Driver for SGI's IOC3 based Ethernet cards as found in the PCI card.
+ *
+ * Copyright (C) 1999, 2000, 2001, 2003 Ralf Baechle
+ * Copyright (C) 1995, 1999, 2000, 2001 by Silicon Graphics, Inc.
+ *
+ * References:
+ * o IOC3 ASIC specification 4.51, 1996-04-18
+ * o IEEE 802.3 specification, 2000 edition
+ * o DP38840A Specification, National Semiconductor, March 1997
+ *
+ * To do:
+ *
+ * o Handle allocation failures in ioc3_alloc_skb() more gracefully.
+ * o Handle allocation failures in ioc3_init_rings().
+ * o Use prefetching for large packets. What is a good lower limit for
+ * prefetching?
+ * o We're probably allocating a bit too much memory.
+ * o Use hardware checksums.
+ * o Convert to using a IOC3 meta driver.
+ * o Which PHYs might possibly be attached to the IOC3 in real live,
+ * which workarounds are required for them? Do we ever have Lucent's?
+ * o For the 2.5 branch kill the mii-tool ioctls.
+ */
+
+#define IOC3_NAME "ioc3-eth"
+#define IOC3_VERSION "2.6.3-3"
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
+
+#ifdef CONFIG_SERIAL_8250
+#include <linux/serial.h>
+#include <asm/serial.h>
+#define IOC3_BAUD (22000000 / (3*16))
+#define IOC3_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#endif
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/skbuff.h>
+#include <net/ip.h>
+
+#include <asm/byteorder.h>
+#include <asm/checksum.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/uaccess.h>
+#include <asm/sn/types.h>
+#include <asm/sn/sn0/addrs.h>
+#include <asm/sn/sn0/hubni.h>
+#include <asm/sn/sn0/hubio.h>
+#include <asm/sn/klconfig.h>
+#include <asm/sn/ioc3.h>
+#include <asm/sn/sn0/ip27.h>
+#include <asm/pci/bridge.h>
+
+/*
+ * 64 RX buffers. This is tunable in the range of 16 <= x < 512. The
+ * value must be a power of two.
+ */
+#define RX_BUFFS 64
+
+#define ETCSR_FD ((17<<ETCSR_IPGR2_SHIFT) | (11<<ETCSR_IPGR1_SHIFT) | 21)
+#define ETCSR_HD ((21<<ETCSR_IPGR2_SHIFT) | (21<<ETCSR_IPGR1_SHIFT) | 21)
+
+/* Private per NIC data of the driver. */
+struct ioc3_private {
+ struct ioc3 *regs;
+ unsigned long *rxr; /* pointer to receiver ring */
+ struct ioc3_etxd *txr;
+ struct sk_buff *rx_skbs[512];
+ struct sk_buff *tx_skbs[128];
+ struct net_device_stats stats;
+ int rx_ci; /* RX consumer index */
+ int rx_pi; /* RX producer index */
+ int tx_ci; /* TX consumer index */
+ int tx_pi; /* TX producer index */
+ int txqlen;
+ u32 emcr, ehar_h, ehar_l;
+ spinlock_t ioc3_lock;
+ struct mii_if_info mii;
+ struct pci_dev *pdev;
+
+ /* Members used by autonegotiation */
+ struct timer_list ioc3_timer;
+};
+
+static inline struct net_device *priv_netdev(struct ioc3_private *dev)
+{
+ return (void *)dev - ((sizeof(struct net_device) + 31) & ~31);
+}
+
+static int ioc3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static void ioc3_set_multicast_list(struct net_device *dev);
+static int ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static void ioc3_timeout(struct net_device *dev);
+static inline unsigned int ioc3_hash(const unsigned char *addr);
+static inline void ioc3_stop(struct ioc3_private *ip);
+static void ioc3_init(struct net_device *dev);
+
+static const char ioc3_str[] = "IOC3 Ethernet";
+static struct ethtool_ops ioc3_ethtool_ops;
+
+/* We use this to acquire receive skb's that we can DMA directly into. */
+
+#define IOC3_CACHELINE 128UL
+
+static inline unsigned long aligned_rx_skb_addr(unsigned long addr)
+{
+ return (~addr + 1) & (IOC3_CACHELINE - 1UL);
+}
+
+static inline struct sk_buff * ioc3_alloc_skb(unsigned long length,
+ unsigned int gfp_mask)
+{
+ struct sk_buff *skb;
+
+ skb = alloc_skb(length + IOC3_CACHELINE - 1, gfp_mask);
+ if (likely(skb)) {
+ int offset = aligned_rx_skb_addr((unsigned long) skb->data);
+ if (offset)
+ skb_reserve(skb, offset);
+ }
+
+ return skb;
+}
+
+static inline unsigned long ioc3_map(void *ptr, unsigned long vdev)
+{
+#ifdef CONFIG_SGI_IP27
+ vdev <<= 58; /* Shift to PCI64_ATTR_VIRTUAL */
+
+ return vdev | (0xaUL << PCI64_ATTR_TARG_SHFT) | PCI64_ATTR_PREF |
+ ((unsigned long)ptr & TO_PHYS_MASK);
+#else
+ return virt_to_bus(ptr);
+#endif
+}
+
+/* BEWARE: The IOC3 documentation documents the size of rx buffers as
+ 1644 while it's actually 1664. This one was nasty to track down ... */
+#define RX_OFFSET 10
+#define RX_BUF_ALLOC_SIZE (1664 + RX_OFFSET + IOC3_CACHELINE)
+
+/* DMA barrier to separate cached and uncached accesses. */
+#define BARRIER() \
+ __asm__("sync" ::: "memory")
+
+
+#define IOC3_SIZE 0x100000
+
+/*
+ * IOC3 is a big endian device
+ *
+ * Unorthodox but makes the users of these macros more readable - the pointer
+ * to the IOC3's memory mapped registers is expected as struct ioc3 * ioc3
+ * in the environment.
+ */
+#define ioc3_r_mcr() be32_to_cpu(ioc3->mcr)
+#define ioc3_w_mcr(v) do { ioc3->mcr = cpu_to_be32(v); } while (0)
+#define ioc3_w_gpcr_s(v) do { ioc3->gpcr_s = cpu_to_be32(v); } while (0)
+#define ioc3_r_emcr() be32_to_cpu(ioc3->emcr)
+#define ioc3_w_emcr(v) do { ioc3->emcr = cpu_to_be32(v); } while (0)
+#define ioc3_r_eisr() be32_to_cpu(ioc3->eisr)
+#define ioc3_w_eisr(v) do { ioc3->eisr = cpu_to_be32(v); } while (0)
+#define ioc3_r_eier() be32_to_cpu(ioc3->eier)
+#define ioc3_w_eier(v) do { ioc3->eier = cpu_to_be32(v); } while (0)
+#define ioc3_r_ercsr() be32_to_cpu(ioc3->ercsr)
+#define ioc3_w_ercsr(v) do { ioc3->ercsr = cpu_to_be32(v); } while (0)
+#define ioc3_r_erbr_h() be32_to_cpu(ioc3->erbr_h)
+#define ioc3_w_erbr_h(v) do { ioc3->erbr_h = cpu_to_be32(v); } while (0)
+#define ioc3_r_erbr_l() be32_to_cpu(ioc3->erbr_l)
+#define ioc3_w_erbr_l(v) do { ioc3->erbr_l = cpu_to_be32(v); } while (0)
+#define ioc3_r_erbar() be32_to_cpu(ioc3->erbar)
+#define ioc3_w_erbar(v) do { ioc3->erbar = cpu_to_be32(v); } while (0)
+#define ioc3_r_ercir() be32_to_cpu(ioc3->ercir)
+#define ioc3_w_ercir(v) do { ioc3->ercir = cpu_to_be32(v); } while (0)
+#define ioc3_r_erpir() be32_to_cpu(ioc3->erpir)
+#define ioc3_w_erpir(v) do { ioc3->erpir = cpu_to_be32(v); } while (0)
+#define ioc3_r_ertr() be32_to_cpu(ioc3->ertr)
+#define ioc3_w_ertr(v) do { ioc3->ertr = cpu_to_be32(v); } while (0)
+#define ioc3_r_etcsr() be32_to_cpu(ioc3->etcsr)
+#define ioc3_w_etcsr(v) do { ioc3->etcsr = cpu_to_be32(v); } while (0)
+#define ioc3_r_ersr() be32_to_cpu(ioc3->ersr)
+#define ioc3_w_ersr(v) do { ioc3->ersr = cpu_to_be32(v); } while (0)
+#define ioc3_r_etcdc() be32_to_cpu(ioc3->etcdc)
+#define ioc3_w_etcdc(v) do { ioc3->etcdc = cpu_to_be32(v); } while (0)
+#define ioc3_r_ebir() be32_to_cpu(ioc3->ebir)
+#define ioc3_w_ebir(v) do { ioc3->ebir = cpu_to_be32(v); } while (0)
+#define ioc3_r_etbr_h() be32_to_cpu(ioc3->etbr_h)
+#define ioc3_w_etbr_h(v) do { ioc3->etbr_h = cpu_to_be32(v); } while (0)
+#define ioc3_r_etbr_l() be32_to_cpu(ioc3->etbr_l)
+#define ioc3_w_etbr_l(v) do { ioc3->etbr_l = cpu_to_be32(v); } while (0)
+#define ioc3_r_etcir() be32_to_cpu(ioc3->etcir)
+#define ioc3_w_etcir(v) do { ioc3->etcir = cpu_to_be32(v); } while (0)
+#define ioc3_r_etpir() be32_to_cpu(ioc3->etpir)
+#define ioc3_w_etpir(v) do { ioc3->etpir = cpu_to_be32(v); } while (0)
+#define ioc3_r_emar_h() be32_to_cpu(ioc3->emar_h)
+#define ioc3_w_emar_h(v) do { ioc3->emar_h = cpu_to_be32(v); } while (0)
+#define ioc3_r_emar_l() be32_to_cpu(ioc3->emar_l)
+#define ioc3_w_emar_l(v) do { ioc3->emar_l = cpu_to_be32(v); } while (0)
+#define ioc3_r_ehar_h() be32_to_cpu(ioc3->ehar_h)
+#define ioc3_w_ehar_h(v) do { ioc3->ehar_h = cpu_to_be32(v); } while (0)
+#define ioc3_r_ehar_l() be32_to_cpu(ioc3->ehar_l)
+#define ioc3_w_ehar_l(v) do { ioc3->ehar_l = cpu_to_be32(v); } while (0)
+#define ioc3_r_micr() be32_to_cpu(ioc3->micr)
+#define ioc3_w_micr(v) do { ioc3->micr = cpu_to_be32(v); } while (0)
+#define ioc3_r_midr_r() be32_to_cpu(ioc3->midr_r)
+#define ioc3_w_midr_r(v) do { ioc3->midr_r = cpu_to_be32(v); } while (0)
+#define ioc3_r_midr_w() be32_to_cpu(ioc3->midr_w)
+#define ioc3_w_midr_w(v) do { ioc3->midr_w = cpu_to_be32(v); } while (0)
+
+static inline u32 mcr_pack(u32 pulse, u32 sample)
+{
+ return (pulse << 10) | (sample << 2);
+}
+
+static int nic_wait(struct ioc3 *ioc3)
+{
+ u32 mcr;
+
+ do {
+ mcr = ioc3_r_mcr();
+ } while (!(mcr & 2));
+
+ return mcr & 1;
+}
+
+static int nic_reset(struct ioc3 *ioc3)
+{
+ int presence;
+
+ ioc3_w_mcr(mcr_pack(500, 65));
+ presence = nic_wait(ioc3);
+
+ ioc3_w_mcr(mcr_pack(0, 500));
+ nic_wait(ioc3);
+
+ return presence;
+}
+
+static inline int nic_read_bit(struct ioc3 *ioc3)
+{
+ int result;
+
+ ioc3_w_mcr(mcr_pack(6, 13));
+ result = nic_wait(ioc3);
+ ioc3_w_mcr(mcr_pack(0, 100));
+ nic_wait(ioc3);
+
+ return result;
+}
+
+static inline void nic_write_bit(struct ioc3 *ioc3, int bit)
+{
+ if (bit)
+ ioc3_w_mcr(mcr_pack(6, 110));
+ else
+ ioc3_w_mcr(mcr_pack(80, 30));
+
+ nic_wait(ioc3);
+}
+
+/*
+ * Read a byte from an iButton device
+ */
+static u32 nic_read_byte(struct ioc3 *ioc3)
+{
+ u32 result = 0;
+ int i;
+
+ for (i = 0; i < 8; i++)
+ result = (result >> 1) | (nic_read_bit(ioc3) << 7);
+
+ return result;
+}
+
+/*
+ * Write a byte to an iButton device
+ */
+static void nic_write_byte(struct ioc3 *ioc3, int byte)
+{
+ int i, bit;
+
+ for (i = 8; i; i--) {
+ bit = byte & 1;
+ byte >>= 1;
+
+ nic_write_bit(ioc3, bit);
+ }
+}
+
+static u64 nic_find(struct ioc3 *ioc3, int *last)
+{
+ int a, b, index, disc;
+ u64 address = 0;
+
+ nic_reset(ioc3);
+ /* Search ROM. */
+ nic_write_byte(ioc3, 0xf0);
+
+ /* Algorithm from ``Book of iButton Standards''. */
+ for (index = 0, disc = 0; index < 64; index++) {
+ a = nic_read_bit(ioc3);
+ b = nic_read_bit(ioc3);
+
+ if (a && b) {
+ printk("NIC search failed (not fatal).\n");
+ *last = 0;
+ return 0;
+ }
+
+ if (!a && !b) {
+ if (index == *last) {
+ address |= 1UL << index;
+ } else if (index > *last) {
+ address &= ~(1UL << index);
+ disc = index;
+ } else if ((address & (1UL << index)) == 0)
+ disc = index;
+ nic_write_bit(ioc3, address & (1UL << index));
+ continue;
+ } else {
+ if (a)
+ address |= 1UL << index;
+ else
+ address &= ~(1UL << index);
+ nic_write_bit(ioc3, a);
+ continue;
+ }
+ }
+
+ *last = disc;
+
+ return address;
+}
+
+static int nic_init(struct ioc3 *ioc3)
+{
+ const char *type;
+ u8 crc;
+ u8 serial[6];
+ int save = 0, i;
+
+ type = "unknown";
+
+ while (1) {
+ u64 reg;
+ reg = nic_find(ioc3, &save);
+
+ switch (reg & 0xff) {
+ case 0x91:
+ type = "DS1981U";
+ break;
+ default:
+ if (save == 0) {
+ /* Let the caller try again. */
+ return -1;
+ }
+ continue;
+ }
+
+ nic_reset(ioc3);
+
+ /* Match ROM. */
+ nic_write_byte(ioc3, 0x55);
+ for (i = 0; i < 8; i++)
+ nic_write_byte(ioc3, (reg >> (i << 3)) & 0xff);
+
+ reg >>= 8; /* Shift out type. */
+ for (i = 0; i < 6; i++) {
+ serial[i] = reg & 0xff;
+ reg >>= 8;
+ }
+ crc = reg & 0xff;
+ break;
+ }
+
+ printk("Found %s NIC", type);
+ if (type != "unknown") {
+ printk (" registration number %02x:%02x:%02x:%02x:%02x:%02x,"
+ " CRC %02x", serial[0], serial[1], serial[2],
+ serial[3], serial[4], serial[5], crc);
+ }
+ printk(".\n");
+
+ return 0;
+}
+
+/*
+ * Read the NIC (Number-In-a-Can) device used to store the MAC address on
+ * SN0 / SN00 nodeboards and PCI cards.
+ */
+static void ioc3_get_eaddr_nic(struct ioc3_private *ip)
+{
+ struct ioc3 *ioc3 = ip->regs;
+ u8 nic[14];
+ int tries = 2; /* There may be some problem with the battery? */
+ int i;
+
+ ioc3_w_gpcr_s(1 << 21);
+
+ while (tries--) {
+ if (!nic_init(ioc3))
+ break;
+ udelay(500);
+ }
+
+ if (tries < 0) {
+ printk("Failed to read MAC address\n");
+ return;
+ }
+
+ /* Read Memory. */
+ nic_write_byte(ioc3, 0xf0);
+ nic_write_byte(ioc3, 0x00);
+ nic_write_byte(ioc3, 0x00);
+
+ for (i = 13; i >= 0; i--)
+ nic[i] = nic_read_byte(ioc3);
+
+ for (i = 2; i < 8; i++)
+ priv_netdev(ip)->dev_addr[i - 2] = nic[i];
+}
+
+/*
+ * Ok, this is hosed by design. It's necessary to know what machine the
+ * NIC is in in order to know how to read the NIC address. We also have
+ * to know if it's a PCI card or a NIC in on the node board ...
+ */
+static void ioc3_get_eaddr(struct ioc3_private *ip)
+{
+ int i;
+
+
+ ioc3_get_eaddr_nic(ip);
+
+ printk("Ethernet address is ");
+ for (i = 0; i < 6; i++) {
+ printk("%02x", priv_netdev(ip)->dev_addr[i]);
+ if (i < 5)
+ printk(":");
+ }
+ printk(".\n");
+}
+
+static void __ioc3_set_mac_address(struct net_device *dev)
+{
+ struct ioc3_private *ip = netdev_priv(dev);
+ struct ioc3 *ioc3 = ip->regs;
+
+ ioc3_w_emar_h((dev->dev_addr[5] << 8) | dev->dev_addr[4]);
+ ioc3_w_emar_l((dev->dev_addr[3] << 24) | (dev->dev_addr[2] << 16) |
+ (dev->dev_addr[1] << 8) | dev->dev_addr[0]);
+}
+
+static int ioc3_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct ioc3_private *ip = netdev_priv(dev);
+ struct sockaddr *sa = addr;
+
+ memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
+
+ spin_lock_irq(&ip->ioc3_lock);
+ __ioc3_set_mac_address(dev);
+ spin_unlock_irq(&ip->ioc3_lock);
+
+ return 0;
+}
+
+/*
+ * Caller must hold the ioc3_lock ever for MII readers. This is also
+ * used to protect the transmitter side but it's low contention.
+ */
+static int ioc3_mdio_read(struct net_device *dev, int phy, int reg)
+{
+ struct ioc3_private *ip = netdev_priv(dev);
+ struct ioc3 *ioc3 = ip->regs;
+
+ while (ioc3_r_micr() & MICR_BUSY);
+ ioc3_w_micr((phy << MICR_PHYADDR_SHIFT) | reg | MICR_READTRIG);
+ while (ioc3_r_micr() & MICR_BUSY);
+
+ return ioc3_r_micr() & MIDR_DATA_MASK;
+}
+
+static void ioc3_mdio_write(struct net_device *dev, int phy, int reg, int data)
+{
+ struct ioc3_private *ip = netdev_priv(dev);
+ struct ioc3 *ioc3 = ip->regs;
+
+ while (ioc3_r_micr() & MICR_BUSY);
+ ioc3_w_midr_w(data);
+ ioc3_w_micr((phy << MICR_PHYADDR_SHIFT) | reg);
+ while (ioc3_r_micr() & MICR_BUSY);
+}
+
+static int ioc3_mii_init(struct ioc3_private *ip);
+
+static struct net_device_stats *ioc3_get_stats(struct net_device *dev)
+{
+ struct ioc3_private *ip = netdev_priv(dev);
+ struct ioc3 *ioc3 = ip->regs;
+
+ ip->stats.collisions += (ioc3_r_etcdc() & ETCDC_COLLCNT_MASK);
+ return &ip->stats;
+}
+
+#ifdef CONFIG_SGI_IOC3_ETH_HW_RX_CSUM
+
+static void ioc3_tcpudp_checksum(struct sk_buff *skb, uint32_t hwsum, int len)
+{
+ struct ethhdr *eh = eth_hdr(skb);
+ uint32_t csum, ehsum;
+ unsigned int proto;
+ struct iphdr *ih;
+ uint16_t *ew;
+ unsigned char *cp;
+
+ /*
+ * Did hardware handle the checksum at all? The cases we can handle
+ * are:
+ *
+ * - TCP and UDP checksums of IPv4 only.
+ * - IPv6 would be doable but we keep that for later ...
+ * - Only unfragmented packets. Did somebody already tell you
+ * fragmentation is evil?
+ * - don't care about packet size. Worst case when processing a
+ * malformed packet we'll try to access the packet at ip header +
+ * 64 bytes which is still inside the skb. Even in the unlikely
+ * case where the checksum is right the higher layers will still
+ * drop the packet as appropriate.
+ */
+ if (eh->h_proto != ntohs(ETH_P_IP))
+ return;
+
+ ih = (struct iphdr *) ((char *)eh + ETH_HLEN);
+ if (ih->frag_off & htons(IP_MF | IP_OFFSET))
+ return;
+
+ proto = ih->protocol;
+ if (proto != IPPROTO_TCP && proto != IPPROTO_UDP)
+ return;
+
+ /* Same as tx - compute csum of pseudo header */
+ csum = hwsum +
+ (ih->tot_len - (ih->ihl << 2)) +
+ htons((uint16_t)ih->protocol) +
+ (ih->saddr >> 16) + (ih->saddr & 0xffff) +
+ (ih->daddr >> 16) + (ih->daddr & 0xffff);
+
+ /* Sum up ethernet dest addr, src addr and protocol */
+ ew = (uint16_t *) eh;
+ ehsum = ew[0] + ew[1] + ew[2] + ew[3] + ew[4] + ew[5] + ew[6];
+
+ ehsum = (ehsum & 0xffff) + (ehsum >> 16);
+ ehsum = (ehsum & 0xffff) + (ehsum >> 16);
+
+ csum += 0xffff ^ ehsum;
+
+ /* In the next step we also subtract the 1's complement
+ checksum of the trailing ethernet CRC. */
+ cp = (char *)eh + len; /* points at trailing CRC */
+ if (len & 1) {
+ csum += 0xffff ^ (uint16_t) ((cp[1] << 8) | cp[0]);
+ csum += 0xffff ^ (uint16_t) ((cp[3] << 8) | cp[2]);
+ } else {
+ csum += 0xffff ^ (uint16_t) ((cp[0] << 8) | cp[1]);
+ csum += 0xffff ^ (uint16_t) ((cp[2] << 8) | cp[3]);
+ }
+
+ csum = (csum & 0xffff) + (csum >> 16);
+ csum = (csum & 0xffff) + (csum >> 16);
+
+ if (csum == 0xffff)
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+}
+#endif /* CONFIG_SGI_IOC3_ETH_HW_RX_CSUM */
+
+static inline void ioc3_rx(struct ioc3_private *ip)
+{
+ struct sk_buff *skb, *new_skb;
+ struct ioc3 *ioc3 = ip->regs;
+ int rx_entry, n_entry, len;
+ struct ioc3_erxbuf *rxb;
+ unsigned long *rxr;
+ u32 w0, err;
+
+ rxr = (unsigned long *) ip->rxr; /* Ring base */
+ rx_entry = ip->rx_ci; /* RX consume index */
+ n_entry = ip->rx_pi;
+
+ skb = ip->rx_skbs[rx_entry];
+ rxb = (struct ioc3_erxbuf *) (skb->data - RX_OFFSET);
+ w0 = be32_to_cpu(rxb->w0);
+
+ while (w0 & ERXBUF_V) {
+ err = be32_to_cpu(rxb->err); /* It's valid ... */
+ if (err & ERXBUF_GOODPKT) {
+ len = ((w0 >> ERXBUF_BYTECNT_SHIFT) & 0x7ff) - 4;
+ skb_trim(skb, len);
+ skb->protocol = eth_type_trans(skb, priv_netdev(ip));
+
+ new_skb = ioc3_alloc_skb(RX_BUF_ALLOC_SIZE, GFP_ATOMIC);
+ if (!new_skb) {
+ /* Ouch, drop packet and just recycle packet
+ to keep the ring filled. */
+ ip->stats.rx_dropped++;
+ new_skb = skb;
+ goto next;
+ }
+
+#ifdef CONFIG_SGI_IOC3_ETH_HW_RX_CSUM
+ ioc3_tcpudp_checksum(skb, w0 & ERXBUF_IPCKSUM_MASK,len);
+#endif
+
+ netif_rx(skb);
+
+ ip->rx_skbs[rx_entry] = NULL; /* Poison */
+
+ new_skb->dev = priv_netdev(ip);
+
+ /* Because we reserve afterwards. */
+ skb_put(new_skb, (1664 + RX_OFFSET));
+ rxb = (struct ioc3_erxbuf *) new_skb->data;
+ skb_reserve(new_skb, RX_OFFSET);
+
+ priv_netdev(ip)->last_rx = jiffies;
+ ip->stats.rx_packets++; /* Statistics */
+ ip->stats.rx_bytes += len;
+ } else {
+ /* The frame is invalid and the skb never
+ reached the network layer so we can just
+ recycle it. */
+ new_skb = skb;
+ ip->stats.rx_errors++;
+ }
+ if (err & ERXBUF_CRCERR) /* Statistics */
+ ip->stats.rx_crc_errors++;
+ if (err & ERXBUF_FRAMERR)
+ ip->stats.rx_frame_errors++;
+next:
+ ip->rx_skbs[n_entry] = new_skb;
+ rxr[n_entry] = cpu_to_be64(ioc3_map(rxb, 1));
+ rxb->w0 = 0; /* Clear valid flag */
+ n_entry = (n_entry + 1) & 511; /* Update erpir */
+
+ /* Now go on to the next ring entry. */
+ rx_entry = (rx_entry + 1) & 511;
+ skb = ip->rx_skbs[rx_entry];
+ rxb = (struct ioc3_erxbuf *) (skb->data - RX_OFFSET);
+ w0 = be32_to_cpu(rxb->w0);
+ }
+ ioc3_w_erpir((n_entry << 3) | ERPIR_ARM);
+ ip->rx_pi = n_entry;
+ ip->rx_ci = rx_entry;
+}
+
+static inline void ioc3_tx(struct ioc3_private *ip)
+{
+ unsigned long packets, bytes;
+ struct ioc3 *ioc3 = ip->regs;
+ int tx_entry, o_entry;
+ struct sk_buff *skb;
+ u32 etcir;
+
+ spin_lock(&ip->ioc3_lock);
+ etcir = ioc3_r_etcir();
+
+ tx_entry = (etcir >> 7) & 127;
+ o_entry = ip->tx_ci;
+ packets = 0;
+ bytes = 0;
+
+ while (o_entry != tx_entry) {
+ packets++;
+ skb = ip->tx_skbs[o_entry];
+ bytes += skb->len;
+ dev_kfree_skb_irq(skb);
+ ip->tx_skbs[o_entry] = NULL;
+
+ o_entry = (o_entry + 1) & 127; /* Next */
+
+ etcir = ioc3_r_etcir(); /* More pkts sent? */
+ tx_entry = (etcir >> 7) & 127;
+ }
+
+ ip->stats.tx_packets += packets;
+ ip->stats.tx_bytes += bytes;
+ ip->txqlen -= packets;
+
+ if (ip->txqlen < 128)
+ netif_wake_queue(priv_netdev(ip));
+
+ ip->tx_ci = o_entry;
+ spin_unlock(&ip->ioc3_lock);
+}
+
+/*
+ * Deal with fatal IOC3 errors. This condition might be caused by a hard or
+ * software problems, so we should try to recover
+ * more gracefully if this ever happens. In theory we might be flooded
+ * with such error interrupts if something really goes wrong, so we might
+ * also consider to take the interface down.
+ */
+static void ioc3_error(struct ioc3_private *ip, u32 eisr)
+{
+ struct net_device *dev = priv_netdev(ip);
+ unsigned char *iface = dev->name;
+
+ spin_lock(&ip->ioc3_lock);
+
+ if (eisr & EISR_RXOFLO)
+ printk(KERN_ERR "%s: RX overflow.\n", iface);
+ if (eisr & EISR_RXBUFOFLO)
+ printk(KERN_ERR "%s: RX buffer overflow.\n", iface);
+ if (eisr & EISR_RXMEMERR)
+ printk(KERN_ERR "%s: RX PCI error.\n", iface);
+ if (eisr & EISR_RXPARERR)
+ printk(KERN_ERR "%s: RX SSRAM parity error.\n", iface);
+ if (eisr & EISR_TXBUFUFLO)
+ printk(KERN_ERR "%s: TX buffer underflow.\n", iface);
+ if (eisr & EISR_TXMEMERR)
+ printk(KERN_ERR "%s: TX PCI error.\n", iface);
+
+ ioc3_stop(ip);
+ ioc3_init(dev);
+ ioc3_mii_init(ip);
+
+ netif_wake_queue(dev);
+
+ spin_unlock(&ip->ioc3_lock);
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+ after the Tx thread. */
+static irqreturn_t ioc3_interrupt(int irq, void *_dev, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *)_dev;
+ struct ioc3_private *ip = netdev_priv(dev);
+ struct ioc3 *ioc3 = ip->regs;
+ const u32 enabled = EISR_RXTIMERINT | EISR_RXOFLO | EISR_RXBUFOFLO |
+ EISR_RXMEMERR | EISR_RXPARERR | EISR_TXBUFUFLO |
+ EISR_TXEXPLICIT | EISR_TXMEMERR;
+ u32 eisr;
+
+ eisr = ioc3_r_eisr() & enabled;
+
+ ioc3_w_eisr(eisr);
+ (void) ioc3_r_eisr(); /* Flush */
+
+ if (eisr & (EISR_RXOFLO | EISR_RXBUFOFLO | EISR_RXMEMERR |
+ EISR_RXPARERR | EISR_TXBUFUFLO | EISR_TXMEMERR))
+ ioc3_error(ip, eisr);
+ if (eisr & EISR_RXTIMERINT)
+ ioc3_rx(ip);
+ if (eisr & EISR_TXEXPLICIT)
+ ioc3_tx(ip);
+
+ return IRQ_HANDLED;
+}
+
+static inline void ioc3_setup_duplex(struct ioc3_private *ip)
+{
+ struct ioc3 *ioc3 = ip->regs;
+
+ if (ip->mii.full_duplex) {
+ ioc3_w_etcsr(ETCSR_FD);
+ ip->emcr |= EMCR_DUPLEX;
+ } else {
+ ioc3_w_etcsr(ETCSR_HD);
+ ip->emcr &= ~EMCR_DUPLEX;
+ }
+ ioc3_w_emcr(ip->emcr);
+}
+
+static void ioc3_timer(unsigned long data)
+{
+ struct ioc3_private *ip = (struct ioc3_private *) data;
+
+ /* Print the link status if it has changed */
+ mii_check_media(&ip->mii, 1, 0);
+ ioc3_setup_duplex(ip);
+
+ ip->ioc3_timer.expires = jiffies + ((12 * HZ)/10); /* 1.2s */
+ add_timer(&ip->ioc3_timer);
+}
+
+/*
+ * Try to find a PHY. There is no apparent relation between the MII addresses
+ * in the SGI documentation and what we find in reality, so we simply probe
+ * for the PHY. It seems IOC3 PHYs usually live on address 31. One of my
+ * onboard IOC3s has the special oddity that probing doesn't seem to find it
+ * yet the interface seems to work fine, so if probing fails we for now will
+ * simply default to PHY 31 instead of bailing out.
+ */
+static int ioc3_mii_init(struct ioc3_private *ip)
+{
+ struct net_device *dev = priv_netdev(ip);
+ int i, found = 0, res = 0;
+ int ioc3_phy_workaround = 1;
+ u16 word;
+
+ for (i = 0; i < 32; i++) {
+ word = ioc3_mdio_read(dev, i, MII_PHYSID1);
+
+ if (word != 0xffff && word != 0x0000) {
+ found = 1;
+ break; /* Found a PHY */
+ }
+ }
+
+ if (!found) {
+ if (ioc3_phy_workaround)
+ i = 31;
+ else {
+ ip->mii.phy_id = -1;
+ res = -ENODEV;
+ goto out;
+ }
+ }
+
+ ip->mii.phy_id = i;
+ ip->ioc3_timer.expires = jiffies + (12 * HZ)/10; /* 1.2 sec. */
+ ip->ioc3_timer.data = (unsigned long) ip;
+ ip->ioc3_timer.function = &ioc3_timer;
+ add_timer(&ip->ioc3_timer);
+
+out:
+ return res;
+}
+
+static inline void ioc3_clean_rx_ring(struct ioc3_private *ip)
+{
+ struct sk_buff *skb;
+ int i;
+
+ for (i = ip->rx_ci; i & 15; i++) {
+ ip->rx_skbs[ip->rx_pi] = ip->rx_skbs[ip->rx_ci];
+ ip->rxr[ip->rx_pi++] = ip->rxr[ip->rx_ci++];
+ }
+ ip->rx_pi &= 511;
+ ip->rx_ci &= 511;
+
+ for (i = ip->rx_ci; i != ip->rx_pi; i = (i+1) & 511) {
+ struct ioc3_erxbuf *rxb;
+ skb = ip->rx_skbs[i];
+ rxb = (struct ioc3_erxbuf *) (skb->data - RX_OFFSET);
+ rxb->w0 = 0;
+ }
+}
+
+static inline void ioc3_clean_tx_ring(struct ioc3_private *ip)
+{
+ struct sk_buff *skb;
+ int i;
+
+ for (i=0; i < 128; i++) {
+ skb = ip->tx_skbs[i];
+ if (skb) {
+ ip->tx_skbs[i] = NULL;
+ dev_kfree_skb_any(skb);
+ }
+ ip->txr[i].cmd = 0;
+ }
+ ip->tx_pi = 0;
+ ip->tx_ci = 0;
+}
+
+static void ioc3_free_rings(struct ioc3_private *ip)
+{
+ struct sk_buff *skb;
+ int rx_entry, n_entry;
+
+ if (ip->txr) {
+ ioc3_clean_tx_ring(ip);
+ free_pages((unsigned long)ip->txr, 2);
+ ip->txr = NULL;
+ }
+
+ if (ip->rxr) {
+ n_entry = ip->rx_ci;
+ rx_entry = ip->rx_pi;
+
+ while (n_entry != rx_entry) {
+ skb = ip->rx_skbs[n_entry];
+ if (skb)
+ dev_kfree_skb_any(skb);
+
+ n_entry = (n_entry + 1) & 511;
+ }
+ free_page((unsigned long)ip->rxr);
+ ip->rxr = NULL;
+ }
+}
+
+static void ioc3_alloc_rings(struct net_device *dev)
+{
+ struct ioc3_private *ip = netdev_priv(dev);
+ struct ioc3_erxbuf *rxb;
+ unsigned long *rxr;
+ int i;
+
+ if (ip->rxr == NULL) {
+ /* Allocate and initialize rx ring. 4kb = 512 entries */
+ ip->rxr = (unsigned long *) get_zeroed_page(GFP_ATOMIC);
+ rxr = (unsigned long *) ip->rxr;
+ if (!rxr)
+ printk("ioc3_alloc_rings(): get_zeroed_page() failed!\n");
+
+ /* Now the rx buffers. The RX ring may be larger but
+ we only allocate 16 buffers for now. Need to tune
+ this for performance and memory later. */
+ for (i = 0; i < RX_BUFFS; i++) {
+ struct sk_buff *skb;
+
+ skb = ioc3_alloc_skb(RX_BUF_ALLOC_SIZE, GFP_ATOMIC);
+ if (!skb) {
+ show_free_areas();
+ continue;
+ }
+
+ ip->rx_skbs[i] = skb;
+ skb->dev = dev;
+
+ /* Because we reserve afterwards. */
+ skb_put(skb, (1664 + RX_OFFSET));
+ rxb = (struct ioc3_erxbuf *) skb->data;
+ rxr[i] = cpu_to_be64(ioc3_map(rxb, 1));
+ skb_reserve(skb, RX_OFFSET);
+ }
+ ip->rx_ci = 0;
+ ip->rx_pi = RX_BUFFS;
+ }
+
+ if (ip->txr == NULL) {
+ /* Allocate and initialize tx rings. 16kb = 128 bufs. */
+ ip->txr = (struct ioc3_etxd *)__get_free_pages(GFP_KERNEL, 2);
+ if (!ip->txr)
+ printk("ioc3_alloc_rings(): __get_free_pages() failed!\n");
+ ip->tx_pi = 0;
+ ip->tx_ci = 0;
+ }
+}
+
+static void ioc3_init_rings(struct net_device *dev)
+{
+ struct ioc3_private *ip = netdev_priv(dev);
+ struct ioc3 *ioc3 = ip->regs;
+ unsigned long ring;
+
+ ioc3_free_rings(ip);
+ ioc3_alloc_rings(dev);
+
+ ioc3_clean_rx_ring(ip);
+ ioc3_clean_tx_ring(ip);
+
+ /* Now the rx ring base, consume & produce registers. */
+ ring = ioc3_map(ip->rxr, 0);
+ ioc3_w_erbr_h(ring >> 32);
+ ioc3_w_erbr_l(ring & 0xffffffff);
+ ioc3_w_ercir(ip->rx_ci << 3);
+ ioc3_w_erpir((ip->rx_pi << 3) | ERPIR_ARM);
+
+ ring = ioc3_map(ip->txr, 0);
+
+ ip->txqlen = 0; /* nothing queued */
+
+ /* Now the tx ring base, consume & produce registers. */
+ ioc3_w_etbr_h(ring >> 32);
+ ioc3_w_etbr_l(ring & 0xffffffff);
+ ioc3_w_etpir(ip->tx_pi << 7);
+ ioc3_w_etcir(ip->tx_ci << 7);
+ (void) ioc3_r_etcir(); /* Flush */
+}
+
+static inline void ioc3_ssram_disc(struct ioc3_private *ip)
+{
+ struct ioc3 *ioc3 = ip->regs;
+ volatile u32 *ssram0 = &ioc3->ssram[0x0000];
+ volatile u32 *ssram1 = &ioc3->ssram[0x4000];
+ unsigned int pattern = 0x5555;
+
+ /* Assume the larger size SSRAM and enable parity checking */
+ ioc3_w_emcr(ioc3_r_emcr() | (EMCR_BUFSIZ | EMCR_RAMPAR));
+
+ *ssram0 = pattern;
+ *ssram1 = ~pattern & IOC3_SSRAM_DM;
+
+ if ((*ssram0 & IOC3_SSRAM_DM) != pattern ||
+ (*ssram1 & IOC3_SSRAM_DM) != (~pattern & IOC3_SSRAM_DM)) {
+ /* set ssram size to 64 KB */
+ ip->emcr = EMCR_RAMPAR;
+ ioc3_w_emcr(ioc3_r_emcr() & ~EMCR_BUFSIZ);
+ } else
+ ip->emcr = EMCR_BUFSIZ | EMCR_RAMPAR;
+}
+
+static void ioc3_init(struct net_device *dev)
+{
+ struct ioc3_private *ip = netdev_priv(dev);
+ struct ioc3 *ioc3 = ip->regs;
+
+ del_timer(&ip->ioc3_timer); /* Kill if running */
+
+ ioc3_w_emcr(EMCR_RST); /* Reset */
+ (void) ioc3_r_emcr(); /* Flush WB */
+ udelay(4); /* Give it time ... */
+ ioc3_w_emcr(0);
+ (void) ioc3_r_emcr();
+
+ /* Misc registers */
+#ifdef CONFIG_SGI_IP27
+ ioc3_w_erbar(PCI64_ATTR_BAR >> 32); /* Barrier on last store */
+#else
+ ioc3_w_erbar(0); /* Let PCI API get it right */
+#endif
+ (void) ioc3_r_etcdc(); /* Clear on read */
+ ioc3_w_ercsr(15); /* RX low watermark */
+ ioc3_w_ertr(0); /* Interrupt immediately */
+ __ioc3_set_mac_address(dev);
+ ioc3_w_ehar_h(ip->ehar_h);
+ ioc3_w_ehar_l(ip->ehar_l);
+ ioc3_w_ersr(42); /* XXX should be random */
+
+ ioc3_init_rings(dev);
+
+ ip->emcr |= ((RX_OFFSET / 2) << EMCR_RXOFF_SHIFT) | EMCR_TXDMAEN |
+ EMCR_TXEN | EMCR_RXDMAEN | EMCR_RXEN | EMCR_PADEN;
+ ioc3_w_emcr(ip->emcr);
+ ioc3_w_eier(EISR_RXTIMERINT | EISR_RXOFLO | EISR_RXBUFOFLO |
+ EISR_RXMEMERR | EISR_RXPARERR | EISR_TXBUFUFLO |
+ EISR_TXEXPLICIT | EISR_TXMEMERR);
+ (void) ioc3_r_eier();
+}
+
+static inline void ioc3_stop(struct ioc3_private *ip)
+{
+ struct ioc3 *ioc3 = ip->regs;
+
+ ioc3_w_emcr(0); /* Shutup */
+ ioc3_w_eier(0); /* Disable interrupts */
+ (void) ioc3_r_eier(); /* Flush */
+}
+
+static int ioc3_open(struct net_device *dev)
+{
+ struct ioc3_private *ip = netdev_priv(dev);
+
+ if (request_irq(dev->irq, ioc3_interrupt, SA_SHIRQ, ioc3_str, dev)) {
+ printk(KERN_ERR "%s: Can't get irq %d\n", dev->name, dev->irq);
+
+ return -EAGAIN;
+ }
+
+ ip->ehar_h = 0;
+ ip->ehar_l = 0;
+ ioc3_init(dev);
+
+ netif_start_queue(dev);
+ return 0;
+}
+
+static int ioc3_close(struct net_device *dev)
+{
+ struct ioc3_private *ip = netdev_priv(dev);
+
+ del_timer(&ip->ioc3_timer);
+
+ netif_stop_queue(dev);
+
+ ioc3_stop(ip);
+ free_irq(dev->irq, dev);
+
+ ioc3_free_rings(ip);
+ return 0;
+}
+
+/*
+ * MENET cards have four IOC3 chips, which are attached to two sets of
+ * PCI slot resources each: the primary connections are on slots
+ * 0..3 and the secondaries are on 4..7
+ *
+ * All four ethernets are brought out to connectors; six serial ports
+ * (a pair from each of the first three IOC3s) are brought out to
+ * MiniDINs; all other subdevices are left swinging in the wind, leave
+ * them disabled.
+ */
+static inline int ioc3_is_menet(struct pci_dev *pdev)
+{
+ struct pci_dev *dev;
+
+ return pdev->bus->parent == NULL
+ && (dev = pci_find_slot(pdev->bus->number, PCI_DEVFN(0, 0)))
+ && dev->vendor == PCI_VENDOR_ID_SGI
+ && dev->device == PCI_DEVICE_ID_SGI_IOC3
+ && (dev = pci_find_slot(pdev->bus->number, PCI_DEVFN(1, 0)))
+ && dev->vendor == PCI_VENDOR_ID_SGI
+ && dev->device == PCI_DEVICE_ID_SGI_IOC3
+ && (dev = pci_find_slot(pdev->bus->number, PCI_DEVFN(2, 0)))
+ && dev->vendor == PCI_VENDOR_ID_SGI
+ && dev->device == PCI_DEVICE_ID_SGI_IOC3;
+}
+
+#ifdef CONFIG_SERIAL_8250
+/*
+ * Note about serial ports and consoles:
+ * For console output, everyone uses the IOC3 UARTA (offset 0x178)
+ * connected to the master node (look in ip27_setup_console() and
+ * ip27prom_console_write()).
+ *
+ * For serial (/dev/ttyS0 etc), we can not have hardcoded serial port
+ * addresses on a partitioned machine. Since we currently use the ioc3
+ * serial ports, we use dynamic serial port discovery that the serial.c
+ * driver uses for pci/pnp ports (there is an entry for the SGI ioc3
+ * boards in pci_boards[]). Unfortunately, UARTA's pio address is greater
+ * than UARTB's, although UARTA on o200s has traditionally been known as
+ * port 0. So, we just use one serial port from each ioc3 (since the
+ * serial driver adds addresses to get to higher ports).
+ *
+ * The first one to do a register_console becomes the preferred console
+ * (if there is no kernel command line console= directive). /dev/console
+ * (ie 5, 1) is then "aliased" into the device number returned by the
+ * "device" routine referred to in this console structure
+ * (ip27prom_console_dev).
+ *
+ * Also look in ip27-pci.c:pci_fixup_ioc3() for some comments on working
+ * around ioc3 oddities in this respect.
+ *
+ * The IOC3 serials use a 22MHz clock rate with an additional divider by 3.
+ * (IOC3_BAUD = (22000000 / (3*16)))
+ */
+
+static void __devinit ioc3_serial_probe(struct pci_dev *pdev, struct ioc3 *ioc3)
+{
+ struct serial_struct req;
+
+ /*
+ * We need to recognice and treat the fourth MENET serial as it
+ * does not have an SuperIO chip attached to it, therefore attempting
+ * to access it will result in bus errors. We call something an
+ * MENET if PCI slot 0, 1, 2 and 3 of a master PCI bus all have an IOC3
+ * in it. This is paranoid but we want to avoid blowing up on a
+ * showhorn PCI box that happens to have 4 IOC3 cards in it so it's
+ * not paranoid enough ...
+ */
+ if (ioc3_is_menet(pdev) && PCI_SLOT(pdev->devfn) == 3)
+ return;
+
+ /* Register to interrupt zero because we share the interrupt with
+ the serial driver which we don't properly support yet. */
+ memset(&req, 0, sizeof(req));
+ req.irq = 0;
+ req.flags = IOC3_COM_FLAGS;
+ req.io_type = SERIAL_IO_MEM;
+ req.iomem_reg_shift = 0;
+ req.baud_base = IOC3_BAUD;
+
+ req.iomem_base = (unsigned char *) &ioc3->sregs.uarta;
+ register_serial(&req);
+
+ req.iomem_base = (unsigned char *) &ioc3->sregs.uartb;
+ register_serial(&req);
+}
+#endif
+
+static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ unsigned int sw_physid1, sw_physid2;
+ struct net_device *dev = NULL;
+ struct ioc3_private *ip;
+ struct ioc3 *ioc3;
+ unsigned long ioc3_base, ioc3_size;
+ u32 vendor, model, rev;
+ int err, pci_using_dac;
+
+ /* Configure DMA attributes. */
+ err = pci_set_dma_mask(pdev, 0xffffffffffffffffULL);
+ if (!err) {
+ pci_using_dac = 1;
+ err = pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL);
+ if (err < 0) {
+ printk(KERN_ERR "%s: Unable to obtain 64 bit DMA "
+ "for consistent allocations\n", pci_name(pdev));
+ goto out;
+ }
+ } else {
+ err = pci_set_dma_mask(pdev, 0xffffffffULL);
+ if (err) {
+ printk(KERN_ERR "%s: No usable DMA configuration, "
+ "aborting.\n", pci_name(pdev));
+ goto out;
+ }
+ pci_using_dac = 0;
+ }
+
+ if (pci_enable_device(pdev))
+ return -ENODEV;
+
+ dev = alloc_etherdev(sizeof(struct ioc3_private));
+ if (!dev) {
+ err = -ENOMEM;
+ goto out_disable;
+ }
+
+ if (pci_using_dac)
+ dev->features |= NETIF_F_HIGHDMA;
+
+ err = pci_request_regions(pdev, "ioc3");
+ if (err)
+ goto out_free;
+
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ ip = netdev_priv(dev);
+
+ dev->irq = pdev->irq;
+
+ ioc3_base = pci_resource_start(pdev, 0);
+ ioc3_size = pci_resource_len(pdev, 0);
+ ioc3 = (struct ioc3 *) ioremap(ioc3_base, ioc3_size);
+ if (!ioc3) {
+ printk(KERN_CRIT "ioc3eth(%s): ioremap failed, goodbye.\n",
+ pci_name(pdev));
+ err = -ENOMEM;
+ goto out_res;
+ }
+ ip->regs = ioc3;
+
+#ifdef CONFIG_SERIAL_8250
+ ioc3_serial_probe(pdev, ioc3);
+#endif
+
+ spin_lock_init(&ip->ioc3_lock);
+ init_timer(&ip->ioc3_timer);
+
+ ioc3_stop(ip);
+ ioc3_init(dev);
+
+ ip->pdev = pdev;
+
+ ip->mii.phy_id_mask = 0x1f;
+ ip->mii.reg_num_mask = 0x1f;
+ ip->mii.dev = dev;
+ ip->mii.mdio_read = ioc3_mdio_read;
+ ip->mii.mdio_write = ioc3_mdio_write;
+
+ ioc3_mii_init(ip);
+
+ if (ip->mii.phy_id == -1) {
+ printk(KERN_CRIT "ioc3-eth(%s): Didn't find a PHY, goodbye.\n",
+ pci_name(pdev));
+ err = -ENODEV;
+ goto out_stop;
+ }
+
+ ioc3_ssram_disc(ip);
+ ioc3_get_eaddr(ip);
+
+ /* The IOC3-specific entries in the device structure. */
+ dev->open = ioc3_open;
+ dev->hard_start_xmit = ioc3_start_xmit;
+ dev->tx_timeout = ioc3_timeout;
+ dev->watchdog_timeo = 5 * HZ;
+ dev->stop = ioc3_close;
+ dev->get_stats = ioc3_get_stats;
+ dev->do_ioctl = ioc3_ioctl;
+ dev->set_multicast_list = ioc3_set_multicast_list;
+ dev->set_mac_address = ioc3_set_mac_address;
+ dev->ethtool_ops = &ioc3_ethtool_ops;
+#ifdef CONFIG_SGI_IOC3_ETH_HW_TX_CSUM
+ dev->features = NETIF_F_IP_CSUM;
+#endif
+
+ ioc3_setup_duplex(ip);
+ sw_physid1 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID1);
+ sw_physid2 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID2);
+
+ err = register_netdev(dev);
+ if (err)
+ goto out_stop;
+
+ mii_check_media(&ip->mii, 1, 1);
+
+ vendor = (sw_physid1 << 12) | (sw_physid2 >> 4);
+ model = (sw_physid2 >> 4) & 0x3f;
+ rev = sw_physid2 & 0xf;
+ printk(KERN_INFO "%s: Using PHY %d, vendor 0x%x, model %d, "
+ "rev %d.\n", dev->name, ip->mii.phy_id, vendor, model, rev);
+ printk(KERN_INFO "%s: IOC3 SSRAM has %d kbyte.\n", dev->name,
+ ip->emcr & EMCR_BUFSIZ ? 128 : 64);
+
+ return 0;
+
+out_stop:
+ ioc3_stop(ip);
+ ioc3_free_rings(ip);
+out_res:
+ pci_release_regions(pdev);
+out_free:
+ free_netdev(dev);
+out_disable:
+ /*
+ * We should call pci_disable_device(pdev); here if the IOC3 wasn't
+ * such a weird device ...
+ */
+out:
+ return err;
+}
+
+static void __devexit ioc3_remove_one (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct ioc3_private *ip = netdev_priv(dev);
+ struct ioc3 *ioc3 = ip->regs;
+
+ unregister_netdev(dev);
+ iounmap(ioc3);
+ pci_release_regions(pdev);
+ free_netdev(dev);
+ /*
+ * We should call pci_disable_device(pdev); here if the IOC3 wasn't
+ * such a weird device ...
+ */
+}
+
+static struct pci_device_id ioc3_pci_tbl[] = {
+ { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, PCI_ANY_ID, PCI_ANY_ID },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, ioc3_pci_tbl);
+
+static struct pci_driver ioc3_driver = {
+ .name = "ioc3-eth",
+ .id_table = ioc3_pci_tbl,
+ .probe = ioc3_probe,
+ .remove = __devexit_p(ioc3_remove_one),
+};
+
+static int __init ioc3_init_module(void)
+{
+ return pci_module_init(&ioc3_driver);
+}
+
+static void __exit ioc3_cleanup_module(void)
+{
+ pci_unregister_driver(&ioc3_driver);
+}
+
+static int ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ unsigned long data;
+ struct ioc3_private *ip = netdev_priv(dev);
+ struct ioc3 *ioc3 = ip->regs;
+ unsigned int len;
+ struct ioc3_etxd *desc;
+ uint32_t w0 = 0;
+ int produce;
+
+#ifdef CONFIG_SGI_IOC3_ETH_HW_TX_CSUM
+ /*
+ * IOC3 has a fairly simple minded checksumming hardware which simply
+ * adds up the 1's complement checksum for the entire packet and
+ * inserts it at an offset which can be specified in the descriptor
+ * into the transmit packet. This means we have to compensate for the
+ * MAC header which should not be summed and the TCP/UDP pseudo headers
+ * manually.
+ */
+ if (skb->ip_summed == CHECKSUM_HW) {
+ int proto = ntohs(skb->nh.iph->protocol);
+ unsigned int csoff;
+ struct iphdr *ih = skb->nh.iph;
+ uint32_t csum, ehsum;
+ uint16_t *eh;
+
+ /* The MAC header. skb->mac seem the logic approach
+ to find the MAC header - except it's a NULL pointer ... */
+ eh = (uint16_t *) skb->data;
+
+ /* Sum up dest addr, src addr and protocol */
+ ehsum = eh[0] + eh[1] + eh[2] + eh[3] + eh[4] + eh[5] + eh[6];
+
+ /* Fold ehsum. can't use csum_fold which negates also ... */
+ ehsum = (ehsum & 0xffff) + (ehsum >> 16);
+ ehsum = (ehsum & 0xffff) + (ehsum >> 16);
+
+ /* Skip IP header; it's sum is always zero and was
+ already filled in by ip_output.c */
+ csum = csum_tcpudp_nofold(ih->saddr, ih->daddr,
+ ih->tot_len - (ih->ihl << 2),
+ proto, 0xffff ^ ehsum);
+
+ csum = (csum & 0xffff) + (csum >> 16); /* Fold again */
+ csum = (csum & 0xffff) + (csum >> 16);
+
+ csoff = ETH_HLEN + (ih->ihl << 2);
+ if (proto == IPPROTO_UDP) {
+ csoff += offsetof(struct udphdr, check);
+ skb->h.uh->check = csum;
+ }
+ if (proto == IPPROTO_TCP) {
+ csoff += offsetof(struct tcphdr, check);
+ skb->h.th->check = csum;
+ }
+
+ w0 = ETXD_DOCHECKSUM | (csoff << ETXD_CHKOFF_SHIFT);
+ }
+#endif /* CONFIG_SGI_IOC3_ETH_HW_TX_CSUM */
+
+ spin_lock_irq(&ip->ioc3_lock);
+
+ data = (unsigned long) skb->data;
+ len = skb->len;
+
+ produce = ip->tx_pi;
+ desc = &ip->txr[produce];
+
+ if (len <= 104) {
+ /* Short packet, let's copy it directly into the ring. */
+ memcpy(desc->data, skb->data, skb->len);
+ if (len < ETH_ZLEN) {
+ /* Very short packet, pad with zeros at the end. */
+ memset(desc->data + len, 0, ETH_ZLEN - len);
+ len = ETH_ZLEN;
+ }
+ desc->cmd = cpu_to_be32(len | ETXD_INTWHENDONE | ETXD_D0V | w0);
+ desc->bufcnt = cpu_to_be32(len);
+ } else if ((data ^ (data + len - 1)) & 0x4000) {
+ unsigned long b2 = (data | 0x3fffUL) + 1UL;
+ unsigned long s1 = b2 - data;
+ unsigned long s2 = data + len - b2;
+
+ desc->cmd = cpu_to_be32(len | ETXD_INTWHENDONE |
+ ETXD_B1V | ETXD_B2V | w0);
+ desc->bufcnt = cpu_to_be32((s1 << ETXD_B1CNT_SHIFT) |
+ (s2 << ETXD_B2CNT_SHIFT));
+ desc->p1 = cpu_to_be64(ioc3_map(skb->data, 1));
+ desc->p2 = cpu_to_be64(ioc3_map((void *) b2, 1));
+ } else {
+ /* Normal sized packet that doesn't cross a page boundary. */
+ desc->cmd = cpu_to_be32(len | ETXD_INTWHENDONE | ETXD_B1V | w0);
+ desc->bufcnt = cpu_to_be32(len << ETXD_B1CNT_SHIFT);
+ desc->p1 = cpu_to_be64(ioc3_map(skb->data, 1));
+ }
+
+ BARRIER();
+
+ dev->trans_start = jiffies;
+ ip->tx_skbs[produce] = skb; /* Remember skb */
+ produce = (produce + 1) & 127;
+ ip->tx_pi = produce;
+ ioc3_w_etpir(produce << 7); /* Fire ... */
+
+ ip->txqlen++;
+
+ if (ip->txqlen >= 127)
+ netif_stop_queue(dev);
+
+ spin_unlock_irq(&ip->ioc3_lock);
+
+ return 0;
+}
+
+static void ioc3_timeout(struct net_device *dev)
+{
+ struct ioc3_private *ip = netdev_priv(dev);
+
+ printk(KERN_ERR "%s: transmit timed out, resetting\n", dev->name);
+
+ spin_lock_irq(&ip->ioc3_lock);
+
+ ioc3_stop(ip);
+ ioc3_init(dev);
+ ioc3_mii_init(ip);
+
+ spin_unlock_irq(&ip->ioc3_lock);
+
+ netif_wake_queue(dev);
+}
+
+/*
+ * Given a multicast ethernet address, this routine calculates the
+ * address's bit index in the logical address filter mask
+ */
+
+static inline unsigned int ioc3_hash(const unsigned char *addr)
+{
+ unsigned int temp = 0;
+ u32 crc;
+ int bits;
+
+ crc = ether_crc_le(ETH_ALEN, addr);
+
+ crc &= 0x3f; /* bit reverse lowest 6 bits for hash index */
+ for (bits = 6; --bits >= 0; ) {
+ temp <<= 1;
+ temp |= (crc & 0x1);
+ crc >>= 1;
+ }
+
+ return temp;
+}
+
+static void ioc3_get_drvinfo (struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct ioc3_private *ip = netdev_priv(dev);
+
+ strcpy (info->driver, IOC3_NAME);
+ strcpy (info->version, IOC3_VERSION);
+ strcpy (info->bus_info, pci_name(ip->pdev));
+}
+
+static int ioc3_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct ioc3_private *ip = netdev_priv(dev);
+ int rc;
+
+ spin_lock_irq(&ip->ioc3_lock);
+ rc = mii_ethtool_gset(&ip->mii, cmd);
+ spin_unlock_irq(&ip->ioc3_lock);
+
+ return rc;
+}
+
+static int ioc3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct ioc3_private *ip = netdev_priv(dev);
+ int rc;
+
+ spin_lock_irq(&ip->ioc3_lock);
+ rc = mii_ethtool_sset(&ip->mii, cmd);
+ spin_unlock_irq(&ip->ioc3_lock);
+
+ return rc;
+}
+
+static int ioc3_nway_reset(struct net_device *dev)
+{
+ struct ioc3_private *ip = netdev_priv(dev);
+ int rc;
+
+ spin_lock_irq(&ip->ioc3_lock);
+ rc = mii_nway_restart(&ip->mii);
+ spin_unlock_irq(&ip->ioc3_lock);
+
+ return rc;
+}
+
+static u32 ioc3_get_link(struct net_device *dev)
+{
+ struct ioc3_private *ip = netdev_priv(dev);
+ int rc;
+
+ spin_lock_irq(&ip->ioc3_lock);
+ rc = mii_link_ok(&ip->mii);
+ spin_unlock_irq(&ip->ioc3_lock);
+
+ return rc;
+}
+
+static struct ethtool_ops ioc3_ethtool_ops = {
+ .get_drvinfo = ioc3_get_drvinfo,
+ .get_settings = ioc3_get_settings,
+ .set_settings = ioc3_set_settings,
+ .nway_reset = ioc3_nway_reset,
+ .get_link = ioc3_get_link,
+};
+
+static int ioc3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct ioc3_private *ip = netdev_priv(dev);
+ int rc;
+
+ spin_lock_irq(&ip->ioc3_lock);
+ rc = generic_mii_ioctl(&ip->mii, if_mii(rq), cmd, NULL);
+ spin_unlock_irq(&ip->ioc3_lock);
+
+ return rc;
+}
+
+static void ioc3_set_multicast_list(struct net_device *dev)
+{
+ struct dev_mc_list *dmi = dev->mc_list;
+ struct ioc3_private *ip = netdev_priv(dev);
+ struct ioc3 *ioc3 = ip->regs;
+ u64 ehar = 0;
+ int i;
+
+ netif_stop_queue(dev); /* Lock out others. */
+
+ if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
+ /* Unconditionally log net taps. */
+ printk(KERN_INFO "%s: Promiscuous mode enabled.\n", dev->name);
+ ip->emcr |= EMCR_PROMISC;
+ ioc3_w_emcr(ip->emcr);
+ (void) ioc3_r_emcr();
+ } else {
+ ip->emcr &= ~EMCR_PROMISC;
+ ioc3_w_emcr(ip->emcr); /* Clear promiscuous. */
+ (void) ioc3_r_emcr();
+
+ if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 64)) {
+ /* Too many for hashing to make sense or we want all
+ multicast packets anyway, so skip computing all the
+ hashes and just accept all packets. */
+ ip->ehar_h = 0xffffffff;
+ ip->ehar_l = 0xffffffff;
+ } else {
+ for (i = 0; i < dev->mc_count; i++) {
+ char *addr = dmi->dmi_addr;
+ dmi = dmi->next;
+
+ if (!(*addr & 1))
+ continue;
+
+ ehar |= (1UL << ioc3_hash(addr));
+ }
+ ip->ehar_h = ehar >> 32;
+ ip->ehar_l = ehar & 0xffffffff;
+ }
+ ioc3_w_ehar_h(ip->ehar_h);
+ ioc3_w_ehar_l(ip->ehar_l);
+ }
+
+ netif_wake_queue(dev); /* Let us get going again. */
+}
+
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
+MODULE_DESCRIPTION("SGI IOC3 Ethernet driver");
+MODULE_LICENSE("GPL");
+
+module_init(ioc3_init_module);
+module_exit(ioc3_cleanup_module);