summaryrefslogtreecommitdiffstats
path: root/drivers/net/sb1250-mac.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/sb1250-mac.c')
-rw-r--r--drivers/net/sb1250-mac.c2920
1 files changed, 2920 insertions, 0 deletions
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
new file mode 100644
index 000000000000..fd2e7c374906
--- /dev/null
+++ b/drivers/net/sb1250-mac.c
@@ -0,0 +1,2920 @@
+/*
+ * Copyright (C) 2001,2002,2003 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *
+ * This driver is designed for the Broadcom SiByte SOC built-in
+ * Ethernet controllers. Written by Mitch Lichtenberg at Broadcom Corp.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/config.h>
+#include <linux/bitops.h>
+#include <asm/processor.h> /* Processor type for cache alignment. */
+#include <asm/io.h>
+#include <asm/cache.h>
+
+/* This is only here until the firmware is ready. In that case,
+ the firmware leaves the ethernet address in the register for us. */
+#ifdef CONFIG_SIBYTE_STANDALONE
+#define SBMAC_ETH0_HWADDR "40:00:00:00:01:00"
+#define SBMAC_ETH1_HWADDR "40:00:00:00:01:01"
+#define SBMAC_ETH2_HWADDR "40:00:00:00:01:02"
+#endif
+
+
+/* These identify the driver base version and may not be removed. */
+#if 0
+static char version1[] __devinitdata =
+"sb1250-mac.c:1.00 1/11/2001 Written by Mitch Lichtenberg\n";
+#endif
+
+
+/* Operational parameters that usually are not changed. */
+
+#define CONFIG_SBMAC_COALESCE
+
+#define MAX_UNITS 3 /* More are supported, limit only on options */
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (2*HZ)
+
+
+MODULE_AUTHOR("Mitch Lichtenberg (Broadcom Corp.)");
+MODULE_DESCRIPTION("Broadcom SiByte SOC GB Ethernet driver");
+
+/* A few user-configurable values which may be modified when a driver
+ module is loaded. */
+
+/* 1 normal messages, 0 quiet .. 7 verbose. */
+static int debug = 1;
+module_param(debug, int, S_IRUGO);
+MODULE_PARM_DESC(debug, "Debug messages");
+
+/* mii status msgs */
+static int noisy_mii = 1;
+module_param(noisy_mii, int, S_IRUGO);
+MODULE_PARM_DESC(noisy_mii, "MII status messages");
+
+/* Used to pass the media type, etc.
+ Both 'options[]' and 'full_duplex[]' should exist for driver
+ interoperability.
+ The media type is usually passed in 'options[]'.
+*/
+#ifdef MODULE
+static int options[MAX_UNITS] = {-1, -1, -1};
+module_param_array(options, int, NULL, S_IRUGO);
+MODULE_PARM_DESC(options, "1-" __MODULE_STRING(MAX_UNITS));
+
+static int full_duplex[MAX_UNITS] = {-1, -1, -1};
+module_param_array(full_duplex, int, NULL, S_IRUGO);
+MODULE_PARM_DESC(full_duplex, "1-" __MODULE_STRING(MAX_UNITS));
+#endif
+
+#ifdef CONFIG_SBMAC_COALESCE
+static int int_pktcnt = 0;
+module_param(int_pktcnt, int, S_IRUGO);
+MODULE_PARM_DESC(int_pktcnt, "Packet count");
+
+static int int_timeout = 0;
+module_param(int_timeout, int, S_IRUGO);
+MODULE_PARM_DESC(int_timeout, "Timeout value");
+#endif
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_defs.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_mac.h>
+#include <asm/sibyte/sb1250_dma.h>
+#include <asm/sibyte/sb1250_int.h>
+#include <asm/sibyte/sb1250_scd.h>
+
+
+/**********************************************************************
+ * Simple types
+ ********************************************************************* */
+
+
+typedef unsigned long sbmac_port_t;
+
+typedef enum { sbmac_speed_auto, sbmac_speed_10,
+ sbmac_speed_100, sbmac_speed_1000 } sbmac_speed_t;
+
+typedef enum { sbmac_duplex_auto, sbmac_duplex_half,
+ sbmac_duplex_full } sbmac_duplex_t;
+
+typedef enum { sbmac_fc_auto, sbmac_fc_disabled, sbmac_fc_frame,
+ sbmac_fc_collision, sbmac_fc_carrier } sbmac_fc_t;
+
+typedef enum { sbmac_state_uninit, sbmac_state_off, sbmac_state_on,
+ sbmac_state_broken } sbmac_state_t;
+
+
+/**********************************************************************
+ * Macros
+ ********************************************************************* */
+
+
+#define SBDMA_NEXTBUF(d,f) ((((d)->f+1) == (d)->sbdma_dscrtable_end) ? \
+ (d)->sbdma_dscrtable : (d)->f+1)
+
+
+#define NUMCACHEBLKS(x) (((x)+SMP_CACHE_BYTES-1)/SMP_CACHE_BYTES)
+
+#define SBMAC_READCSR(t) __raw_readq((unsigned long)t)
+#define SBMAC_WRITECSR(t,v) __raw_writeq(v, (unsigned long)t)
+
+
+#define SBMAC_MAX_TXDESCR 32
+#define SBMAC_MAX_RXDESCR 32
+
+#define ETHER_ALIGN 2
+#define ETHER_ADDR_LEN 6
+#define ENET_PACKET_SIZE 1518
+/*#define ENET_PACKET_SIZE 9216 */
+
+/**********************************************************************
+ * DMA Descriptor structure
+ ********************************************************************* */
+
+typedef struct sbdmadscr_s {
+ uint64_t dscr_a;
+ uint64_t dscr_b;
+} sbdmadscr_t;
+
+typedef unsigned long paddr_t;
+
+/**********************************************************************
+ * DMA Controller structure
+ ********************************************************************* */
+
+typedef struct sbmacdma_s {
+
+ /*
+ * This stuff is used to identify the channel and the registers
+ * associated with it.
+ */
+
+ struct sbmac_softc *sbdma_eth; /* back pointer to associated MAC */
+ int sbdma_channel; /* channel number */
+ int sbdma_txdir; /* direction (1=transmit) */
+ int sbdma_maxdescr; /* total # of descriptors in ring */
+#ifdef CONFIG_SBMAC_COALESCE
+ int sbdma_int_pktcnt; /* # descriptors rx/tx before interrupt*/
+ int sbdma_int_timeout; /* # usec rx/tx interrupt */
+#endif
+
+ sbmac_port_t sbdma_config0; /* DMA config register 0 */
+ sbmac_port_t sbdma_config1; /* DMA config register 1 */
+ sbmac_port_t sbdma_dscrbase; /* Descriptor base address */
+ sbmac_port_t sbdma_dscrcnt; /* Descriptor count register */
+ sbmac_port_t sbdma_curdscr; /* current descriptor address */
+
+ /*
+ * This stuff is for maintenance of the ring
+ */
+
+ sbdmadscr_t *sbdma_dscrtable; /* base of descriptor table */
+ sbdmadscr_t *sbdma_dscrtable_end; /* end of descriptor table */
+
+ struct sk_buff **sbdma_ctxtable; /* context table, one per descr */
+
+ paddr_t sbdma_dscrtable_phys; /* and also the phys addr */
+ sbdmadscr_t *sbdma_addptr; /* next dscr for sw to add */
+ sbdmadscr_t *sbdma_remptr; /* next dscr for sw to remove */
+} sbmacdma_t;
+
+
+/**********************************************************************
+ * Ethernet softc structure
+ ********************************************************************* */
+
+struct sbmac_softc {
+
+ /*
+ * Linux-specific things
+ */
+
+ struct net_device *sbm_dev; /* pointer to linux device */
+ spinlock_t sbm_lock; /* spin lock */
+ struct timer_list sbm_timer; /* for monitoring MII */
+ struct net_device_stats sbm_stats;
+ int sbm_devflags; /* current device flags */
+
+ int sbm_phy_oldbmsr;
+ int sbm_phy_oldanlpar;
+ int sbm_phy_oldk1stsr;
+ int sbm_phy_oldlinkstat;
+ int sbm_buffersize;
+
+ unsigned char sbm_phys[2];
+
+ /*
+ * Controller-specific things
+ */
+
+ unsigned long sbm_base; /* MAC's base address */
+ sbmac_state_t sbm_state; /* current state */
+
+ sbmac_port_t sbm_macenable; /* MAC Enable Register */
+ sbmac_port_t sbm_maccfg; /* MAC Configuration Register */
+ sbmac_port_t sbm_fifocfg; /* FIFO configuration register */
+ sbmac_port_t sbm_framecfg; /* Frame configuration register */
+ sbmac_port_t sbm_rxfilter; /* receive filter register */
+ sbmac_port_t sbm_isr; /* Interrupt status register */
+ sbmac_port_t sbm_imr; /* Interrupt mask register */
+ sbmac_port_t sbm_mdio; /* MDIO register */
+
+ sbmac_speed_t sbm_speed; /* current speed */
+ sbmac_duplex_t sbm_duplex; /* current duplex */
+ sbmac_fc_t sbm_fc; /* current flow control setting */
+
+ unsigned char sbm_hwaddr[ETHER_ADDR_LEN];
+
+ sbmacdma_t sbm_txdma; /* for now, only use channel 0 */
+ sbmacdma_t sbm_rxdma;
+ int rx_hw_checksum;
+ int sbe_idx;
+};
+
+
+/**********************************************************************
+ * Externs
+ ********************************************************************* */
+
+/**********************************************************************
+ * Prototypes
+ ********************************************************************* */
+
+static void sbdma_initctx(sbmacdma_t *d,
+ struct sbmac_softc *s,
+ int chan,
+ int txrx,
+ int maxdescr);
+static void sbdma_channel_start(sbmacdma_t *d, int rxtx);
+static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *m);
+static int sbdma_add_txbuffer(sbmacdma_t *d,struct sk_buff *m);
+static void sbdma_emptyring(sbmacdma_t *d);
+static void sbdma_fillring(sbmacdma_t *d);
+static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d);
+static void sbdma_tx_process(struct sbmac_softc *sc,sbmacdma_t *d);
+static int sbmac_initctx(struct sbmac_softc *s);
+static void sbmac_channel_start(struct sbmac_softc *s);
+static void sbmac_channel_stop(struct sbmac_softc *s);
+static sbmac_state_t sbmac_set_channel_state(struct sbmac_softc *,sbmac_state_t);
+static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff);
+static uint64_t sbmac_addr2reg(unsigned char *ptr);
+static irqreturn_t sbmac_intr(int irq,void *dev_instance,struct pt_regs *rgs);
+static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev);
+static void sbmac_setmulti(struct sbmac_softc *sc);
+static int sbmac_init(struct net_device *dev, int idx);
+static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed);
+static int sbmac_set_duplex(struct sbmac_softc *s,sbmac_duplex_t duplex,sbmac_fc_t fc);
+
+static int sbmac_open(struct net_device *dev);
+static void sbmac_timer(unsigned long data);
+static void sbmac_tx_timeout (struct net_device *dev);
+static struct net_device_stats *sbmac_get_stats(struct net_device *dev);
+static void sbmac_set_rx_mode(struct net_device *dev);
+static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static int sbmac_close(struct net_device *dev);
+static int sbmac_mii_poll(struct sbmac_softc *s,int noisy);
+
+static void sbmac_mii_sync(struct sbmac_softc *s);
+static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitcnt);
+static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx);
+static void sbmac_mii_write(struct sbmac_softc *s,int phyaddr,int regidx,
+ unsigned int regval);
+
+
+/**********************************************************************
+ * Globals
+ ********************************************************************* */
+
+static uint64_t sbmac_orig_hwaddr[MAX_UNITS];
+
+
+/**********************************************************************
+ * MDIO constants
+ ********************************************************************* */
+
+#define MII_COMMAND_START 0x01
+#define MII_COMMAND_READ 0x02
+#define MII_COMMAND_WRITE 0x01
+#define MII_COMMAND_ACK 0x02
+
+#define BMCR_RESET 0x8000
+#define BMCR_LOOPBACK 0x4000
+#define BMCR_SPEED0 0x2000
+#define BMCR_ANENABLE 0x1000
+#define BMCR_POWERDOWN 0x0800
+#define BMCR_ISOLATE 0x0400
+#define BMCR_RESTARTAN 0x0200
+#define BMCR_DUPLEX 0x0100
+#define BMCR_COLTEST 0x0080
+#define BMCR_SPEED1 0x0040
+#define BMCR_SPEED1000 BMCR_SPEED1
+#define BMCR_SPEED100 BMCR_SPEED0
+#define BMCR_SPEED10 0
+
+#define BMSR_100BT4 0x8000
+#define BMSR_100BT_FDX 0x4000
+#define BMSR_100BT_HDX 0x2000
+#define BMSR_10BT_FDX 0x1000
+#define BMSR_10BT_HDX 0x0800
+#define BMSR_100BT2_FDX 0x0400
+#define BMSR_100BT2_HDX 0x0200
+#define BMSR_1000BT_XSR 0x0100
+#define BMSR_PRESUP 0x0040
+#define BMSR_ANCOMPLT 0x0020
+#define BMSR_REMFAULT 0x0010
+#define BMSR_AUTONEG 0x0008
+#define BMSR_LINKSTAT 0x0004
+#define BMSR_JABDETECT 0x0002
+#define BMSR_EXTCAPAB 0x0001
+
+#define PHYIDR1 0x2000
+#define PHYIDR2 0x5C60
+
+#define ANAR_NP 0x8000
+#define ANAR_RF 0x2000
+#define ANAR_ASYPAUSE 0x0800
+#define ANAR_PAUSE 0x0400
+#define ANAR_T4 0x0200
+#define ANAR_TXFD 0x0100
+#define ANAR_TXHD 0x0080
+#define ANAR_10FD 0x0040
+#define ANAR_10HD 0x0020
+#define ANAR_PSB 0x0001
+
+#define ANLPAR_NP 0x8000
+#define ANLPAR_ACK 0x4000
+#define ANLPAR_RF 0x2000
+#define ANLPAR_ASYPAUSE 0x0800
+#define ANLPAR_PAUSE 0x0400
+#define ANLPAR_T4 0x0200
+#define ANLPAR_TXFD 0x0100
+#define ANLPAR_TXHD 0x0080
+#define ANLPAR_10FD 0x0040
+#define ANLPAR_10HD 0x0020
+#define ANLPAR_PSB 0x0001 /* 802.3 */
+
+#define ANER_PDF 0x0010
+#define ANER_LPNPABLE 0x0008
+#define ANER_NPABLE 0x0004
+#define ANER_PAGERX 0x0002
+#define ANER_LPANABLE 0x0001
+
+#define ANNPTR_NP 0x8000
+#define ANNPTR_MP 0x2000
+#define ANNPTR_ACK2 0x1000
+#define ANNPTR_TOGTX 0x0800
+#define ANNPTR_CODE 0x0008
+
+#define ANNPRR_NP 0x8000
+#define ANNPRR_MP 0x2000
+#define ANNPRR_ACK3 0x1000
+#define ANNPRR_TOGTX 0x0800
+#define ANNPRR_CODE 0x0008
+
+#define K1TCR_TESTMODE 0x0000
+#define K1TCR_MSMCE 0x1000
+#define K1TCR_MSCV 0x0800
+#define K1TCR_RPTR 0x0400
+#define K1TCR_1000BT_FDX 0x200
+#define K1TCR_1000BT_HDX 0x100
+
+#define K1STSR_MSMCFLT 0x8000
+#define K1STSR_MSCFGRES 0x4000
+#define K1STSR_LRSTAT 0x2000
+#define K1STSR_RRSTAT 0x1000
+#define K1STSR_LP1KFD 0x0800
+#define K1STSR_LP1KHD 0x0400
+#define K1STSR_LPASMDIR 0x0200
+
+#define K1SCR_1KX_FDX 0x8000
+#define K1SCR_1KX_HDX 0x4000
+#define K1SCR_1KT_FDX 0x2000
+#define K1SCR_1KT_HDX 0x1000
+
+#define STRAP_PHY1 0x0800
+#define STRAP_NCMODE 0x0400
+#define STRAP_MANMSCFG 0x0200
+#define STRAP_ANENABLE 0x0100
+#define STRAP_MSVAL 0x0080
+#define STRAP_1KHDXADV 0x0010
+#define STRAP_1KFDXADV 0x0008
+#define STRAP_100ADV 0x0004
+#define STRAP_SPEEDSEL 0x0000
+#define STRAP_SPEED100 0x0001
+
+#define PHYSUP_SPEED1000 0x10
+#define PHYSUP_SPEED100 0x08
+#define PHYSUP_SPEED10 0x00
+#define PHYSUP_LINKUP 0x04
+#define PHYSUP_FDX 0x02
+
+#define MII_BMCR 0x00 /* Basic mode control register (rw) */
+#define MII_BMSR 0x01 /* Basic mode status register (ro) */
+#define MII_K1STSR 0x0A /* 1K Status Register (ro) */
+#define MII_ANLPAR 0x05 /* Autonegotiation lnk partner abilities (rw) */
+
+
+#define M_MAC_MDIO_DIR_OUTPUT 0 /* for clarity */
+
+#define ENABLE 1
+#define DISABLE 0
+
+/**********************************************************************
+ * SBMAC_MII_SYNC(s)
+ *
+ * Synchronize with the MII - send a pattern of bits to the MII
+ * that will guarantee that it is ready to accept a command.
+ *
+ * Input parameters:
+ * s - sbmac structure
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+
+static void sbmac_mii_sync(struct sbmac_softc *s)
+{
+ int cnt;
+ uint64_t bits;
+ int mac_mdio_genc;
+
+ mac_mdio_genc = SBMAC_READCSR(s->sbm_mdio) & M_MAC_GENC;
+
+ bits = M_MAC_MDIO_DIR_OUTPUT | M_MAC_MDIO_OUT;
+
+ SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc);
+
+ for (cnt = 0; cnt < 32; cnt++) {
+ SBMAC_WRITECSR(s->sbm_mdio,bits | M_MAC_MDC | mac_mdio_genc);
+ SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc);
+ }
+}
+
+/**********************************************************************
+ * SBMAC_MII_SENDDATA(s,data,bitcnt)
+ *
+ * Send some bits to the MII. The bits to be sent are right-
+ * justified in the 'data' parameter.
+ *
+ * Input parameters:
+ * s - sbmac structure
+ * data - data to send
+ * bitcnt - number of bits to send
+ ********************************************************************* */
+
+static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitcnt)
+{
+ int i;
+ uint64_t bits;
+ unsigned int curmask;
+ int mac_mdio_genc;
+
+ mac_mdio_genc = SBMAC_READCSR(s->sbm_mdio) & M_MAC_GENC;
+
+ bits = M_MAC_MDIO_DIR_OUTPUT;
+ SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc);
+
+ curmask = 1 << (bitcnt - 1);
+
+ for (i = 0; i < bitcnt; i++) {
+ if (data & curmask)
+ bits |= M_MAC_MDIO_OUT;
+ else bits &= ~M_MAC_MDIO_OUT;
+ SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc);
+ SBMAC_WRITECSR(s->sbm_mdio,bits | M_MAC_MDC | mac_mdio_genc);
+ SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc);
+ curmask >>= 1;
+ }
+}
+
+
+
+/**********************************************************************
+ * SBMAC_MII_READ(s,phyaddr,regidx)
+ *
+ * Read a PHY register.
+ *
+ * Input parameters:
+ * s - sbmac structure
+ * phyaddr - PHY's address
+ * regidx = index of register to read
+ *
+ * Return value:
+ * value read, or 0 if an error occurred.
+ ********************************************************************* */
+
+static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx)
+{
+ int idx;
+ int error;
+ int regval;
+ int mac_mdio_genc;
+
+ /*
+ * Synchronize ourselves so that the PHY knows the next
+ * thing coming down is a command
+ */
+
+ sbmac_mii_sync(s);
+
+ /*
+ * Send the data to the PHY. The sequence is
+ * a "start" command (2 bits)
+ * a "read" command (2 bits)
+ * the PHY addr (5 bits)
+ * the register index (5 bits)
+ */
+
+ sbmac_mii_senddata(s,MII_COMMAND_START, 2);
+ sbmac_mii_senddata(s,MII_COMMAND_READ, 2);
+ sbmac_mii_senddata(s,phyaddr, 5);
+ sbmac_mii_senddata(s,regidx, 5);
+
+ mac_mdio_genc = SBMAC_READCSR(s->sbm_mdio) & M_MAC_GENC;
+
+ /*
+ * Switch the port around without a clock transition.
+ */
+ SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_INPUT | mac_mdio_genc);
+
+ /*
+ * Send out a clock pulse to signal we want the status
+ */
+
+ SBMAC_WRITECSR(s->sbm_mdio,
+ M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc);
+ SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_INPUT | mac_mdio_genc);
+
+ /*
+ * If an error occurred, the PHY will signal '1' back
+ */
+ error = SBMAC_READCSR(s->sbm_mdio) & M_MAC_MDIO_IN;
+
+ /*
+ * Issue an 'idle' clock pulse, but keep the direction
+ * the same.
+ */
+ SBMAC_WRITECSR(s->sbm_mdio,
+ M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc);
+ SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_INPUT | mac_mdio_genc);
+
+ regval = 0;
+
+ for (idx = 0; idx < 16; idx++) {
+ regval <<= 1;
+
+ if (error == 0) {
+ if (SBMAC_READCSR(s->sbm_mdio) & M_MAC_MDIO_IN)
+ regval |= 1;
+ }
+
+ SBMAC_WRITECSR(s->sbm_mdio,
+ M_MAC_MDIO_DIR_INPUT|M_MAC_MDC | mac_mdio_genc);
+ SBMAC_WRITECSR(s->sbm_mdio,
+ M_MAC_MDIO_DIR_INPUT | mac_mdio_genc);
+ }
+
+ /* Switch back to output */
+ SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc);
+
+ if (error == 0)
+ return regval;
+ return 0;
+}
+
+
+/**********************************************************************
+ * SBMAC_MII_WRITE(s,phyaddr,regidx,regval)
+ *
+ * Write a value to a PHY register.
+ *
+ * Input parameters:
+ * s - sbmac structure
+ * phyaddr - PHY to use
+ * regidx - register within the PHY
+ * regval - data to write to register
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+
+static void sbmac_mii_write(struct sbmac_softc *s,int phyaddr,int regidx,
+ unsigned int regval)
+{
+ int mac_mdio_genc;
+
+ sbmac_mii_sync(s);
+
+ sbmac_mii_senddata(s,MII_COMMAND_START,2);
+ sbmac_mii_senddata(s,MII_COMMAND_WRITE,2);
+ sbmac_mii_senddata(s,phyaddr, 5);
+ sbmac_mii_senddata(s,regidx, 5);
+ sbmac_mii_senddata(s,MII_COMMAND_ACK,2);
+ sbmac_mii_senddata(s,regval,16);
+
+ mac_mdio_genc = SBMAC_READCSR(s->sbm_mdio) & M_MAC_GENC;
+
+ SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc);
+}
+
+
+
+/**********************************************************************
+ * SBDMA_INITCTX(d,s,chan,txrx,maxdescr)
+ *
+ * Initialize a DMA channel context. Since there are potentially
+ * eight DMA channels per MAC, it's nice to do this in a standard
+ * way.
+ *
+ * Input parameters:
+ * d - sbmacdma_t structure (DMA channel context)
+ * s - sbmac_softc structure (pointer to a MAC)
+ * chan - channel number (0..1 right now)
+ * txrx - Identifies DMA_TX or DMA_RX for channel direction
+ * maxdescr - number of descriptors
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+
+static void sbdma_initctx(sbmacdma_t *d,
+ struct sbmac_softc *s,
+ int chan,
+ int txrx,
+ int maxdescr)
+{
+ /*
+ * Save away interesting stuff in the structure
+ */
+
+ d->sbdma_eth = s;
+ d->sbdma_channel = chan;
+ d->sbdma_txdir = txrx;
+
+#if 0
+ /* RMON clearing */
+ s->sbe_idx =(s->sbm_base - A_MAC_BASE_0)/MAC_SPACING;
+#endif
+
+ SBMAC_WRITECSR(IOADDR(
+ A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_BYTES)), 0);
+ SBMAC_WRITECSR(IOADDR(
+ A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_COLLISIONS)), 0);
+ SBMAC_WRITECSR(IOADDR(
+ A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_LATE_COL)), 0);
+ SBMAC_WRITECSR(IOADDR(
+ A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_EX_COL)), 0);
+ SBMAC_WRITECSR(IOADDR(
+ A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_FCS_ERROR)), 0);
+ SBMAC_WRITECSR(IOADDR(
+ A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_ABORT)), 0);
+ SBMAC_WRITECSR(IOADDR(
+ A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_BAD)), 0);
+ SBMAC_WRITECSR(IOADDR(
+ A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_GOOD)), 0);
+ SBMAC_WRITECSR(IOADDR(
+ A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_RUNT)), 0);
+ SBMAC_WRITECSR(IOADDR(
+ A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_OVERSIZE)), 0);
+ SBMAC_WRITECSR(IOADDR(
+ A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BYTES)), 0);
+ SBMAC_WRITECSR(IOADDR(
+ A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_MCAST)), 0);
+ SBMAC_WRITECSR(IOADDR(
+ A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BCAST)), 0);
+ SBMAC_WRITECSR(IOADDR(
+ A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BAD)), 0);
+ SBMAC_WRITECSR(IOADDR(
+ A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_GOOD)), 0);
+ SBMAC_WRITECSR(IOADDR(
+ A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_RUNT)), 0);
+ SBMAC_WRITECSR(IOADDR(
+ A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_OVERSIZE)), 0);
+ SBMAC_WRITECSR(IOADDR(
+ A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_FCS_ERROR)), 0);
+ SBMAC_WRITECSR(IOADDR(
+ A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_LENGTH_ERROR)), 0);
+ SBMAC_WRITECSR(IOADDR(
+ A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_CODE_ERROR)), 0);
+ SBMAC_WRITECSR(IOADDR(
+ A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_ALIGN_ERROR)), 0);
+
+ /*
+ * initialize register pointers
+ */
+
+ d->sbdma_config0 =
+ s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG0);
+ d->sbdma_config1 =
+ s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG1);
+ d->sbdma_dscrbase =
+ s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_BASE);
+ d->sbdma_dscrcnt =
+ s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_CNT);
+ d->sbdma_curdscr =
+ s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CUR_DSCRADDR);
+
+ /*
+ * Allocate memory for the ring
+ */
+
+ d->sbdma_maxdescr = maxdescr;
+
+ d->sbdma_dscrtable = (sbdmadscr_t *)
+ kmalloc(d->sbdma_maxdescr*sizeof(sbdmadscr_t), GFP_KERNEL);
+
+ memset(d->sbdma_dscrtable,0,d->sbdma_maxdescr*sizeof(sbdmadscr_t));
+
+ d->sbdma_dscrtable_end = d->sbdma_dscrtable + d->sbdma_maxdescr;
+
+ d->sbdma_dscrtable_phys = virt_to_phys(d->sbdma_dscrtable);
+
+ /*
+ * And context table
+ */
+
+ d->sbdma_ctxtable = (struct sk_buff **)
+ kmalloc(d->sbdma_maxdescr*sizeof(struct sk_buff *), GFP_KERNEL);
+
+ memset(d->sbdma_ctxtable,0,d->sbdma_maxdescr*sizeof(struct sk_buff *));
+
+#ifdef CONFIG_SBMAC_COALESCE
+ /*
+ * Setup Rx/Tx DMA coalescing defaults
+ */
+
+ if ( int_pktcnt ) {
+ d->sbdma_int_pktcnt = int_pktcnt;
+ } else {
+ d->sbdma_int_pktcnt = 1;
+ }
+
+ if ( int_timeout ) {
+ d->sbdma_int_timeout = int_timeout;
+ } else {
+ d->sbdma_int_timeout = 0;
+ }
+#endif
+
+}
+
+/**********************************************************************
+ * SBDMA_CHANNEL_START(d)
+ *
+ * Initialize the hardware registers for a DMA channel.
+ *
+ * Input parameters:
+ * d - DMA channel to init (context must be previously init'd
+ * rxtx - DMA_RX or DMA_TX depending on what type of channel
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+
+static void sbdma_channel_start(sbmacdma_t *d, int rxtx )
+{
+ /*
+ * Turn on the DMA channel
+ */
+
+#ifdef CONFIG_SBMAC_COALESCE
+ SBMAC_WRITECSR(d->sbdma_config1,
+ V_DMA_INT_TIMEOUT(d->sbdma_int_timeout) |
+ 0);
+ SBMAC_WRITECSR(d->sbdma_config0,
+ M_DMA_EOP_INT_EN |
+ V_DMA_RINGSZ(d->sbdma_maxdescr) |
+ V_DMA_INT_PKTCNT(d->sbdma_int_pktcnt) |
+ 0);
+#else
+ SBMAC_WRITECSR(d->sbdma_config1,0);
+ SBMAC_WRITECSR(d->sbdma_config0,
+ V_DMA_RINGSZ(d->sbdma_maxdescr) |
+ 0);
+#endif
+
+ SBMAC_WRITECSR(d->sbdma_dscrbase,d->sbdma_dscrtable_phys);
+
+ /*
+ * Initialize ring pointers
+ */
+
+ d->sbdma_addptr = d->sbdma_dscrtable;
+ d->sbdma_remptr = d->sbdma_dscrtable;
+}
+
+/**********************************************************************
+ * SBDMA_CHANNEL_STOP(d)
+ *
+ * Initialize the hardware registers for a DMA channel.
+ *
+ * Input parameters:
+ * d - DMA channel to init (context must be previously init'd
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+
+static void sbdma_channel_stop(sbmacdma_t *d)
+{
+ /*
+ * Turn off the DMA channel
+ */
+
+ SBMAC_WRITECSR(d->sbdma_config1,0);
+
+ SBMAC_WRITECSR(d->sbdma_dscrbase,0);
+
+ SBMAC_WRITECSR(d->sbdma_config0,0);
+
+ /*
+ * Zero ring pointers
+ */
+
+ d->sbdma_addptr = 0;
+ d->sbdma_remptr = 0;
+}
+
+static void sbdma_align_skb(struct sk_buff *skb,int power2,int offset)
+{
+ unsigned long addr;
+ unsigned long newaddr;
+
+ addr = (unsigned long) skb->data;
+
+ newaddr = (addr + power2 - 1) & ~(power2 - 1);
+
+ skb_reserve(skb,newaddr-addr+offset);
+}
+
+
+/**********************************************************************
+ * SBDMA_ADD_RCVBUFFER(d,sb)
+ *
+ * Add a buffer to the specified DMA channel. For receive channels,
+ * this queues a buffer for inbound packets.
+ *
+ * Input parameters:
+ * d - DMA channel descriptor
+ * sb - sk_buff to add, or NULL if we should allocate one
+ *
+ * Return value:
+ * 0 if buffer could not be added (ring is full)
+ * 1 if buffer added successfully
+ ********************************************************************* */
+
+
+static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *sb)
+{
+ sbdmadscr_t *dsc;
+ sbdmadscr_t *nextdsc;
+ struct sk_buff *sb_new = NULL;
+ int pktsize = ENET_PACKET_SIZE;
+
+ /* get pointer to our current place in the ring */
+
+ dsc = d->sbdma_addptr;
+ nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr);
+
+ /*
+ * figure out if the ring is full - if the next descriptor
+ * is the same as the one that we're going to remove from
+ * the ring, the ring is full
+ */
+
+ if (nextdsc == d->sbdma_remptr) {
+ return -ENOSPC;
+ }
+
+ /*
+ * Allocate a sk_buff if we don't already have one.
+ * If we do have an sk_buff, reset it so that it's empty.
+ *
+ * Note: sk_buffs don't seem to be guaranteed to have any sort
+ * of alignment when they are allocated. Therefore, allocate enough
+ * extra space to make sure that:
+ *
+ * 1. the data does not start in the middle of a cache line.
+ * 2. The data does not end in the middle of a cache line
+ * 3. The buffer can be aligned such that the IP addresses are
+ * naturally aligned.
+ *
+ * Remember, the SOCs MAC writes whole cache lines at a time,
+ * without reading the old contents first. So, if the sk_buff's
+ * data portion starts in the middle of a cache line, the SOC
+ * DMA will trash the beginning (and ending) portions.
+ */
+
+ if (sb == NULL) {
+ sb_new = dev_alloc_skb(ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN);
+ if (sb_new == NULL) {
+ printk(KERN_INFO "%s: sk_buff allocation failed\n",
+ d->sbdma_eth->sbm_dev->name);
+ return -ENOBUFS;
+ }
+
+ sbdma_align_skb(sb_new, SMP_CACHE_BYTES, ETHER_ALIGN);
+
+ /* mark skbuff owned by our device */
+ sb_new->dev = d->sbdma_eth->sbm_dev;
+ }
+ else {
+ sb_new = sb;
+ /*
+ * nothing special to reinit buffer, it's already aligned
+ * and sb->data already points to a good place.
+ */
+ }
+
+ /*
+ * fill in the descriptor
+ */
+
+#ifdef CONFIG_SBMAC_COALESCE
+ /*
+ * Do not interrupt per DMA transfer.
+ */
+ dsc->dscr_a = virt_to_phys(sb_new->tail) |
+ V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) |
+ 0;
+#else
+ dsc->dscr_a = virt_to_phys(sb_new->tail) |
+ V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) |
+ M_DMA_DSCRA_INTERRUPT;
+#endif
+
+ /* receiving: no options */
+ dsc->dscr_b = 0;
+
+ /*
+ * fill in the context
+ */
+
+ d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb_new;
+
+ /*
+ * point at next packet
+ */
+
+ d->sbdma_addptr = nextdsc;
+
+ /*
+ * Give the buffer to the DMA engine.
+ */
+
+ SBMAC_WRITECSR(d->sbdma_dscrcnt,1);
+
+ return 0; /* we did it */
+}
+
+/**********************************************************************
+ * SBDMA_ADD_TXBUFFER(d,sb)
+ *
+ * Add a transmit buffer to the specified DMA channel, causing a
+ * transmit to start.
+ *
+ * Input parameters:
+ * d - DMA channel descriptor
+ * sb - sk_buff to add
+ *
+ * Return value:
+ * 0 transmit queued successfully
+ * otherwise error code
+ ********************************************************************* */
+
+
+static int sbdma_add_txbuffer(sbmacdma_t *d,struct sk_buff *sb)
+{
+ sbdmadscr_t *dsc;
+ sbdmadscr_t *nextdsc;
+ uint64_t phys;
+ uint64_t ncb;
+ int length;
+
+ /* get pointer to our current place in the ring */
+
+ dsc = d->sbdma_addptr;
+ nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr);
+
+ /*
+ * figure out if the ring is full - if the next descriptor
+ * is the same as the one that we're going to remove from
+ * the ring, the ring is full
+ */
+
+ if (nextdsc == d->sbdma_remptr) {
+ return -ENOSPC;
+ }
+
+ /*
+ * Under Linux, it's not necessary to copy/coalesce buffers
+ * like it is on NetBSD. We think they're all contiguous,
+ * but that may not be true for GBE.
+ */
+
+ length = sb->len;
+
+ /*
+ * fill in the descriptor. Note that the number of cache
+ * blocks in the descriptor is the number of blocks
+ * *spanned*, so we need to add in the offset (if any)
+ * while doing the calculation.
+ */
+
+ phys = virt_to_phys(sb->data);
+ ncb = NUMCACHEBLKS(length+(phys & (SMP_CACHE_BYTES - 1)));
+
+ dsc->dscr_a = phys |
+ V_DMA_DSCRA_A_SIZE(ncb) |
+#ifndef CONFIG_SBMAC_COALESCE
+ M_DMA_DSCRA_INTERRUPT |
+#endif
+ M_DMA_ETHTX_SOP;
+
+ /* transmitting: set outbound options and length */
+
+ dsc->dscr_b = V_DMA_DSCRB_OPTIONS(K_DMA_ETHTX_APPENDCRC_APPENDPAD) |
+ V_DMA_DSCRB_PKT_SIZE(length);
+
+ /*
+ * fill in the context
+ */
+
+ d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb;
+
+ /*
+ * point at next packet
+ */
+
+ d->sbdma_addptr = nextdsc;
+
+ /*
+ * Give the buffer to the DMA engine.
+ */
+
+ SBMAC_WRITECSR(d->sbdma_dscrcnt,1);
+
+ return 0; /* we did it */
+}
+
+
+
+
+/**********************************************************************
+ * SBDMA_EMPTYRING(d)
+ *
+ * Free all allocated sk_buffs on the specified DMA channel;
+ *
+ * Input parameters:
+ * d - DMA channel
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+
+static void sbdma_emptyring(sbmacdma_t *d)
+{
+ int idx;
+ struct sk_buff *sb;
+
+ for (idx = 0; idx < d->sbdma_maxdescr; idx++) {
+ sb = d->sbdma_ctxtable[idx];
+ if (sb) {
+ dev_kfree_skb(sb);
+ d->sbdma_ctxtable[idx] = NULL;
+ }
+ }
+}
+
+
+/**********************************************************************
+ * SBDMA_FILLRING(d)
+ *
+ * Fill the specified DMA channel (must be receive channel)
+ * with sk_buffs
+ *
+ * Input parameters:
+ * d - DMA channel
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+
+static void sbdma_fillring(sbmacdma_t *d)
+{
+ int idx;
+
+ for (idx = 0; idx < SBMAC_MAX_RXDESCR-1; idx++) {
+ if (sbdma_add_rcvbuffer(d,NULL) != 0)
+ break;
+ }
+}
+
+
+/**********************************************************************
+ * SBDMA_RX_PROCESS(sc,d)
+ *
+ * Process "completed" receive buffers on the specified DMA channel.
+ * Note that this isn't really ideal for priority channels, since
+ * it processes all of the packets on a given channel before
+ * returning.
+ *
+ * Input parameters:
+ * sc - softc structure
+ * d - DMA channel context
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+
+static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d)
+{
+ int curidx;
+ int hwidx;
+ sbdmadscr_t *dsc;
+ struct sk_buff *sb;
+ int len;
+
+ for (;;) {
+ /*
+ * figure out where we are (as an index) and where
+ * the hardware is (also as an index)
+ *
+ * This could be done faster if (for example) the
+ * descriptor table was page-aligned and contiguous in
+ * both virtual and physical memory -- you could then
+ * just compare the low-order bits of the virtual address
+ * (sbdma_remptr) and the physical address (sbdma_curdscr CSR)
+ */
+
+ curidx = d->sbdma_remptr - d->sbdma_dscrtable;
+ hwidx = (int) (((SBMAC_READCSR(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) -
+ d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t));
+
+ /*
+ * If they're the same, that means we've processed all
+ * of the descriptors up to (but not including) the one that
+ * the hardware is working on right now.
+ */
+
+ if (curidx == hwidx)
+ break;
+
+ /*
+ * Otherwise, get the packet's sk_buff ptr back
+ */
+
+ dsc = &(d->sbdma_dscrtable[curidx]);
+ sb = d->sbdma_ctxtable[curidx];
+ d->sbdma_ctxtable[curidx] = NULL;
+
+ len = (int)G_DMA_DSCRB_PKT_SIZE(dsc->dscr_b) - 4;
+
+ /*
+ * Check packet status. If good, process it.
+ * If not, silently drop it and put it back on the
+ * receive ring.
+ */
+
+ if (!(dsc->dscr_a & M_DMA_ETHRX_BAD)) {
+
+ /*
+ * Add a new buffer to replace the old one. If we fail
+ * to allocate a buffer, we're going to drop this
+ * packet and put it right back on the receive ring.
+ */
+
+ if (sbdma_add_rcvbuffer(d,NULL) == -ENOBUFS) {
+ sc->sbm_stats.rx_dropped++;
+ sbdma_add_rcvbuffer(d,sb); /* re-add old buffer */
+ } else {
+ /*
+ * Set length into the packet
+ */
+ skb_put(sb,len);
+
+ /*
+ * Buffer has been replaced on the
+ * receive ring. Pass the buffer to
+ * the kernel
+ */
+ sc->sbm_stats.rx_bytes += len;
+ sc->sbm_stats.rx_packets++;
+ sb->protocol = eth_type_trans(sb,d->sbdma_eth->sbm_dev);
+ /* Check hw IPv4/TCP checksum if supported */
+ if (sc->rx_hw_checksum == ENABLE) {
+ if (!((dsc->dscr_a) & M_DMA_ETHRX_BADIP4CS) &&
+ !((dsc->dscr_a) & M_DMA_ETHRX_BADTCPCS)) {
+ sb->ip_summed = CHECKSUM_UNNECESSARY;
+ /* don't need to set sb->csum */
+ } else {
+ sb->ip_summed = CHECKSUM_NONE;
+ }
+ }
+
+ netif_rx(sb);
+ }
+ } else {
+ /*
+ * Packet was mangled somehow. Just drop it and
+ * put it back on the receive ring.
+ */
+ sc->sbm_stats.rx_errors++;
+ sbdma_add_rcvbuffer(d,sb);
+ }
+
+
+ /*
+ * .. and advance to the next buffer.
+ */
+
+ d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr);
+
+ }
+}
+
+
+
+/**********************************************************************
+ * SBDMA_TX_PROCESS(sc,d)
+ *
+ * Process "completed" transmit buffers on the specified DMA channel.
+ * This is normally called within the interrupt service routine.
+ * Note that this isn't really ideal for priority channels, since
+ * it processes all of the packets on a given channel before
+ * returning.
+ *
+ * Input parameters:
+ * sc - softc structure
+ * d - DMA channel context
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+
+static void sbdma_tx_process(struct sbmac_softc *sc,sbmacdma_t *d)
+{
+ int curidx;
+ int hwidx;
+ sbdmadscr_t *dsc;
+ struct sk_buff *sb;
+ unsigned long flags;
+
+ spin_lock_irqsave(&(sc->sbm_lock), flags);
+
+ for (;;) {
+ /*
+ * figure out where we are (as an index) and where
+ * the hardware is (also as an index)
+ *
+ * This could be done faster if (for example) the
+ * descriptor table was page-aligned and contiguous in
+ * both virtual and physical memory -- you could then
+ * just compare the low-order bits of the virtual address
+ * (sbdma_remptr) and the physical address (sbdma_curdscr CSR)
+ */
+
+ curidx = d->sbdma_remptr - d->sbdma_dscrtable;
+ hwidx = (int) (((SBMAC_READCSR(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) -
+ d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t));
+
+ /*
+ * If they're the same, that means we've processed all
+ * of the descriptors up to (but not including) the one that
+ * the hardware is working on right now.
+ */
+
+ if (curidx == hwidx)
+ break;
+
+ /*
+ * Otherwise, get the packet's sk_buff ptr back
+ */
+
+ dsc = &(d->sbdma_dscrtable[curidx]);
+ sb = d->sbdma_ctxtable[curidx];
+ d->sbdma_ctxtable[curidx] = NULL;
+
+ /*
+ * Stats
+ */
+
+ sc->sbm_stats.tx_bytes += sb->len;
+ sc->sbm_stats.tx_packets++;
+
+ /*
+ * for transmits, we just free buffers.
+ */
+
+ dev_kfree_skb_irq(sb);
+
+ /*
+ * .. and advance to the next buffer.
+ */
+
+ d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr);
+
+ }
+
+ /*
+ * Decide if we should wake up the protocol or not.
+ * Other drivers seem to do this when we reach a low
+ * watermark on the transmit queue.
+ */
+
+ netif_wake_queue(d->sbdma_eth->sbm_dev);
+
+ spin_unlock_irqrestore(&(sc->sbm_lock), flags);
+
+}
+
+
+
+/**********************************************************************
+ * SBMAC_INITCTX(s)
+ *
+ * Initialize an Ethernet context structure - this is called
+ * once per MAC on the 1250. Memory is allocated here, so don't
+ * call it again from inside the ioctl routines that bring the
+ * interface up/down
+ *
+ * Input parameters:
+ * s - sbmac context structure
+ *
+ * Return value:
+ * 0
+ ********************************************************************* */
+
+static int sbmac_initctx(struct sbmac_softc *s)
+{
+
+ /*
+ * figure out the addresses of some ports
+ */
+
+ s->sbm_macenable = s->sbm_base + R_MAC_ENABLE;
+ s->sbm_maccfg = s->sbm_base + R_MAC_CFG;
+ s->sbm_fifocfg = s->sbm_base + R_MAC_THRSH_CFG;
+ s->sbm_framecfg = s->sbm_base + R_MAC_FRAMECFG;
+ s->sbm_rxfilter = s->sbm_base + R_MAC_ADFILTER_CFG;
+ s->sbm_isr = s->sbm_base + R_MAC_STATUS;
+ s->sbm_imr = s->sbm_base + R_MAC_INT_MASK;
+ s->sbm_mdio = s->sbm_base + R_MAC_MDIO;
+
+ s->sbm_phys[0] = 1;
+ s->sbm_phys[1] = 0;
+
+ s->sbm_phy_oldbmsr = 0;
+ s->sbm_phy_oldanlpar = 0;
+ s->sbm_phy_oldk1stsr = 0;
+ s->sbm_phy_oldlinkstat = 0;
+
+ /*
+ * Initialize the DMA channels. Right now, only one per MAC is used
+ * Note: Only do this _once_, as it allocates memory from the kernel!
+ */
+
+ sbdma_initctx(&(s->sbm_txdma),s,0,DMA_TX,SBMAC_MAX_TXDESCR);
+ sbdma_initctx(&(s->sbm_rxdma),s,0,DMA_RX,SBMAC_MAX_RXDESCR);
+
+ /*
+ * initial state is OFF
+ */
+
+ s->sbm_state = sbmac_state_off;
+
+ /*
+ * Initial speed is (XXX TEMP) 10MBit/s HDX no FC
+ */
+
+ s->sbm_speed = sbmac_speed_10;
+ s->sbm_duplex = sbmac_duplex_half;
+ s->sbm_fc = sbmac_fc_disabled;
+
+ return 0;
+}
+
+
+static void sbdma_uninitctx(struct sbmacdma_s *d)
+{
+ if (d->sbdma_dscrtable) {
+ kfree(d->sbdma_dscrtable);
+ d->sbdma_dscrtable = NULL;
+ }
+
+ if (d->sbdma_ctxtable) {
+ kfree(d->sbdma_ctxtable);
+ d->sbdma_ctxtable = NULL;
+ }
+}
+
+
+static void sbmac_uninitctx(struct sbmac_softc *sc)
+{
+ sbdma_uninitctx(&(sc->sbm_txdma));
+ sbdma_uninitctx(&(sc->sbm_rxdma));
+}
+
+
+/**********************************************************************
+ * SBMAC_CHANNEL_START(s)
+ *
+ * Start packet processing on this MAC.
+ *
+ * Input parameters:
+ * s - sbmac structure
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+
+static void sbmac_channel_start(struct sbmac_softc *s)
+{
+ uint64_t reg;
+ sbmac_port_t port;
+ uint64_t cfg,fifo,framecfg;
+ int idx, th_value;
+
+ /*
+ * Don't do this if running
+ */
+
+ if (s->sbm_state == sbmac_state_on)
+ return;
+
+ /*
+ * Bring the controller out of reset, but leave it off.
+ */
+
+ SBMAC_WRITECSR(s->sbm_macenable,0);
+
+ /*
+ * Ignore all received packets
+ */
+
+ SBMAC_WRITECSR(s->sbm_rxfilter,0);
+
+ /*
+ * Calculate values for various control registers.
+ */
+
+ cfg = M_MAC_RETRY_EN |
+ M_MAC_TX_HOLD_SOP_EN |
+ V_MAC_TX_PAUSE_CNT_16K |
+ M_MAC_AP_STAT_EN |
+ M_MAC_FAST_SYNC |
+ M_MAC_SS_EN |
+ 0;
+
+ /*
+ * Be sure that RD_THRSH+WR_THRSH <= 32 for pass1 pars
+ * and make sure that RD_THRSH + WR_THRSH <=128 for pass2 and above
+ * Use a larger RD_THRSH for gigabit
+ */
+ if (periph_rev >= 2)
+ th_value = 64;
+ else
+ th_value = 28;
+
+ fifo = V_MAC_TX_WR_THRSH(4) | /* Must be '4' or '8' */
+ ((s->sbm_speed == sbmac_speed_1000)
+ ? V_MAC_TX_RD_THRSH(th_value) : V_MAC_TX_RD_THRSH(4)) |
+ V_MAC_TX_RL_THRSH(4) |
+ V_MAC_RX_PL_THRSH(4) |
+ V_MAC_RX_RD_THRSH(4) | /* Must be '4' */
+ V_MAC_RX_PL_THRSH(4) |
+ V_MAC_RX_RL_THRSH(8) |
+ 0;
+
+ framecfg = V_MAC_MIN_FRAMESZ_DEFAULT |
+ V_MAC_MAX_FRAMESZ_DEFAULT |
+ V_MAC_BACKOFF_SEL(1);
+
+ /*
+ * Clear out the hash address map
+ */
+
+ port = s->sbm_base + R_MAC_HASH_BASE;
+ for (idx = 0; idx < MAC_HASH_COUNT; idx++) {
+ SBMAC_WRITECSR(port,0);
+ port += sizeof(uint64_t);
+ }
+
+ /*
+ * Clear out the exact-match table
+ */
+
+ port = s->sbm_base + R_MAC_ADDR_BASE;
+ for (idx = 0; idx < MAC_ADDR_COUNT; idx++) {
+ SBMAC_WRITECSR(port,0);
+ port += sizeof(uint64_t);
+ }
+
+ /*
+ * Clear out the DMA Channel mapping table registers
+ */
+
+ port = s->sbm_base + R_MAC_CHUP0_BASE;
+ for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) {
+ SBMAC_WRITECSR(port,0);
+ port += sizeof(uint64_t);
+ }
+
+
+ port = s->sbm_base + R_MAC_CHLO0_BASE;
+ for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) {
+ SBMAC_WRITECSR(port,0);
+ port += sizeof(uint64_t);
+ }
+
+ /*
+ * Program the hardware address. It goes into the hardware-address
+ * register as well as the first filter register.
+ */
+
+ reg = sbmac_addr2reg(s->sbm_hwaddr);
+
+ port = s->sbm_base + R_MAC_ADDR_BASE;
+ SBMAC_WRITECSR(port,reg);
+ port = s->sbm_base + R_MAC_ETHERNET_ADDR;
+
+#ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
+ /*
+ * Pass1 SOCs do not receive packets addressed to the
+ * destination address in the R_MAC_ETHERNET_ADDR register.
+ * Set the value to zero.
+ */
+ SBMAC_WRITECSR(port,0);
+#else
+ SBMAC_WRITECSR(port,reg);
+#endif
+
+ /*
+ * Set the receive filter for no packets, and write values
+ * to the various config registers
+ */
+
+ SBMAC_WRITECSR(s->sbm_rxfilter,0);
+ SBMAC_WRITECSR(s->sbm_imr,0);
+ SBMAC_WRITECSR(s->sbm_framecfg,framecfg);
+ SBMAC_WRITECSR(s->sbm_fifocfg,fifo);
+ SBMAC_WRITECSR(s->sbm_maccfg,cfg);
+
+ /*
+ * Initialize DMA channels (rings should be ok now)
+ */
+
+ sbdma_channel_start(&(s->sbm_rxdma), DMA_RX);
+ sbdma_channel_start(&(s->sbm_txdma), DMA_TX);
+
+ /*
+ * Configure the speed, duplex, and flow control
+ */
+
+ sbmac_set_speed(s,s->sbm_speed);
+ sbmac_set_duplex(s,s->sbm_duplex,s->sbm_fc);
+
+ /*
+ * Fill the receive ring
+ */
+
+ sbdma_fillring(&(s->sbm_rxdma));
+
+ /*
+ * Turn on the rest of the bits in the enable register
+ */
+
+ SBMAC_WRITECSR(s->sbm_macenable,
+ M_MAC_RXDMA_EN0 |
+ M_MAC_TXDMA_EN0 |
+ M_MAC_RX_ENABLE |
+ M_MAC_TX_ENABLE);
+
+
+
+
+#ifdef CONFIG_SBMAC_COALESCE
+ /*
+ * Accept any TX interrupt and EOP count/timer RX interrupts on ch 0
+ */
+ SBMAC_WRITECSR(s->sbm_imr,
+ ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_TX_CH0) |
+ ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_RX_CH0));
+#else
+ /*
+ * Accept any kind of interrupt on TX and RX DMA channel 0
+ */
+ SBMAC_WRITECSR(s->sbm_imr,
+ (M_MAC_INT_CHANNEL << S_MAC_TX_CH0) |
+ (M_MAC_INT_CHANNEL << S_MAC_RX_CH0));
+#endif
+
+ /*
+ * Enable receiving unicasts and broadcasts
+ */
+
+ SBMAC_WRITECSR(s->sbm_rxfilter,M_MAC_UCAST_EN | M_MAC_BCAST_EN);
+
+ /*
+ * we're running now.
+ */
+
+ s->sbm_state = sbmac_state_on;
+
+ /*
+ * Program multicast addresses
+ */
+
+ sbmac_setmulti(s);
+
+ /*
+ * If channel was in promiscuous mode before, turn that on
+ */
+
+ if (s->sbm_devflags & IFF_PROMISC) {
+ sbmac_promiscuous_mode(s,1);
+ }
+
+}
+
+
+/**********************************************************************
+ * SBMAC_CHANNEL_STOP(s)
+ *
+ * Stop packet processing on this MAC.
+ *
+ * Input parameters:
+ * s - sbmac structure
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+
+static void sbmac_channel_stop(struct sbmac_softc *s)
+{
+ /* don't do this if already stopped */
+
+ if (s->sbm_state == sbmac_state_off)
+ return;
+
+ /* don't accept any packets, disable all interrupts */
+
+ SBMAC_WRITECSR(s->sbm_rxfilter,0);
+ SBMAC_WRITECSR(s->sbm_imr,0);
+
+ /* Turn off ticker */
+
+ /* XXX */
+
+ /* turn off receiver and transmitter */
+
+ SBMAC_WRITECSR(s->sbm_macenable,0);
+
+ /* We're stopped now. */
+
+ s->sbm_state = sbmac_state_off;
+
+ /*
+ * Stop DMA channels (rings should be ok now)
+ */
+
+ sbdma_channel_stop(&(s->sbm_rxdma));
+ sbdma_channel_stop(&(s->sbm_txdma));
+
+ /* Empty the receive and transmit rings */
+
+ sbdma_emptyring(&(s->sbm_rxdma));
+ sbdma_emptyring(&(s->sbm_txdma));
+
+}
+
+/**********************************************************************
+ * SBMAC_SET_CHANNEL_STATE(state)
+ *
+ * Set the channel's state ON or OFF
+ *
+ * Input parameters:
+ * state - new state
+ *
+ * Return value:
+ * old state
+ ********************************************************************* */
+static sbmac_state_t sbmac_set_channel_state(struct sbmac_softc *sc,
+ sbmac_state_t state)
+{
+ sbmac_state_t oldstate = sc->sbm_state;
+
+ /*
+ * If same as previous state, return
+ */
+
+ if (state == oldstate) {
+ return oldstate;
+ }
+
+ /*
+ * If new state is ON, turn channel on
+ */
+
+ if (state == sbmac_state_on) {
+ sbmac_channel_start(sc);
+ }
+ else {
+ sbmac_channel_stop(sc);
+ }
+
+ /*
+ * Return previous state
+ */
+
+ return oldstate;
+}
+
+
+/**********************************************************************
+ * SBMAC_PROMISCUOUS_MODE(sc,onoff)
+ *
+ * Turn on or off promiscuous mode
+ *
+ * Input parameters:
+ * sc - softc
+ * onoff - 1 to turn on, 0 to turn off
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+
+static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff)
+{
+ uint64_t reg;
+
+ if (sc->sbm_state != sbmac_state_on)
+ return;
+
+ if (onoff) {
+ reg = SBMAC_READCSR(sc->sbm_rxfilter);
+ reg |= M_MAC_ALLPKT_EN;
+ SBMAC_WRITECSR(sc->sbm_rxfilter,reg);
+ }
+ else {
+ reg = SBMAC_READCSR(sc->sbm_rxfilter);
+ reg &= ~M_MAC_ALLPKT_EN;
+ SBMAC_WRITECSR(sc->sbm_rxfilter,reg);
+ }
+}
+
+/**********************************************************************
+ * SBMAC_SETIPHDR_OFFSET(sc,onoff)
+ *
+ * Set the iphdr offset as 15 assuming ethernet encapsulation
+ *
+ * Input parameters:
+ * sc - softc
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+
+static void sbmac_set_iphdr_offset(struct sbmac_softc *sc)
+{
+ uint64_t reg;
+
+ /* Hard code the off set to 15 for now */
+ reg = SBMAC_READCSR(sc->sbm_rxfilter);
+ reg &= ~M_MAC_IPHDR_OFFSET | V_MAC_IPHDR_OFFSET(15);
+ SBMAC_WRITECSR(sc->sbm_rxfilter,reg);
+
+ /* read system identification to determine revision */
+ if (periph_rev >= 2) {
+ sc->rx_hw_checksum = ENABLE;
+ } else {
+ sc->rx_hw_checksum = DISABLE;
+ }
+}
+
+
+/**********************************************************************
+ * SBMAC_ADDR2REG(ptr)
+ *
+ * Convert six bytes into the 64-bit register value that
+ * we typically write into the SBMAC's address/mcast registers
+ *
+ * Input parameters:
+ * ptr - pointer to 6 bytes
+ *
+ * Return value:
+ * register value
+ ********************************************************************* */
+
+static uint64_t sbmac_addr2reg(unsigned char *ptr)
+{
+ uint64_t reg = 0;
+
+ ptr += 6;
+
+ reg |= (uint64_t) *(--ptr);
+ reg <<= 8;
+ reg |= (uint64_t) *(--ptr);
+ reg <<= 8;
+ reg |= (uint64_t) *(--ptr);
+ reg <<= 8;
+ reg |= (uint64_t) *(--ptr);
+ reg <<= 8;
+ reg |= (uint64_t) *(--ptr);
+ reg <<= 8;
+ reg |= (uint64_t) *(--ptr);
+
+ return reg;
+}
+
+
+/**********************************************************************
+ * SBMAC_SET_SPEED(s,speed)
+ *
+ * Configure LAN speed for the specified MAC.
+ * Warning: must be called when MAC is off!
+ *
+ * Input parameters:
+ * s - sbmac structure
+ * speed - speed to set MAC to (see sbmac_speed_t enum)
+ *
+ * Return value:
+ * 1 if successful
+ * 0 indicates invalid parameters
+ ********************************************************************* */
+
+static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed)
+{
+ uint64_t cfg;
+ uint64_t framecfg;
+
+ /*
+ * Save new current values
+ */
+
+ s->sbm_speed = speed;
+
+ if (s->sbm_state == sbmac_state_on)
+ return 0; /* save for next restart */
+
+ /*
+ * Read current register values
+ */
+
+ cfg = SBMAC_READCSR(s->sbm_maccfg);
+ framecfg = SBMAC_READCSR(s->sbm_framecfg);
+
+ /*
+ * Mask out the stuff we want to change
+ */
+
+ cfg &= ~(M_MAC_BURST_EN | M_MAC_SPEED_SEL);
+ framecfg &= ~(M_MAC_IFG_RX | M_MAC_IFG_TX | M_MAC_IFG_THRSH |
+ M_MAC_SLOT_SIZE);
+
+ /*
+ * Now add in the new bits
+ */
+
+ switch (speed) {
+ case sbmac_speed_10:
+ framecfg |= V_MAC_IFG_RX_10 |
+ V_MAC_IFG_TX_10 |
+ K_MAC_IFG_THRSH_10 |
+ V_MAC_SLOT_SIZE_10;
+ cfg |= V_MAC_SPEED_SEL_10MBPS;
+ break;
+
+ case sbmac_speed_100:
+ framecfg |= V_MAC_IFG_RX_100 |
+ V_MAC_IFG_TX_100 |
+ V_MAC_IFG_THRSH_100 |
+ V_MAC_SLOT_SIZE_100;
+ cfg |= V_MAC_SPEED_SEL_100MBPS ;
+ break;
+
+ case sbmac_speed_1000:
+ framecfg |= V_MAC_IFG_RX_1000 |
+ V_MAC_IFG_TX_1000 |
+ V_MAC_IFG_THRSH_1000 |
+ V_MAC_SLOT_SIZE_1000;
+ cfg |= V_MAC_SPEED_SEL_1000MBPS | M_MAC_BURST_EN;
+ break;
+
+ case sbmac_speed_auto: /* XXX not implemented */
+ /* fall through */
+ default:
+ return 0;
+ }
+
+ /*
+ * Send the bits back to the hardware
+ */
+
+ SBMAC_WRITECSR(s->sbm_framecfg,framecfg);
+ SBMAC_WRITECSR(s->sbm_maccfg,cfg);
+
+ return 1;
+}
+
+/**********************************************************************
+ * SBMAC_SET_DUPLEX(s,duplex,fc)
+ *
+ * Set Ethernet duplex and flow control options for this MAC
+ * Warning: must be called when MAC is off!
+ *
+ * Input parameters:
+ * s - sbmac structure
+ * duplex - duplex setting (see sbmac_duplex_t)
+ * fc - flow control setting (see sbmac_fc_t)
+ *
+ * Return value:
+ * 1 if ok
+ * 0 if an invalid parameter combination was specified
+ ********************************************************************* */
+
+static int sbmac_set_duplex(struct sbmac_softc *s,sbmac_duplex_t duplex,sbmac_fc_t fc)
+{
+ uint64_t cfg;
+
+ /*
+ * Save new current values
+ */
+
+ s->sbm_duplex = duplex;
+ s->sbm_fc = fc;
+
+ if (s->sbm_state == sbmac_state_on)
+ return 0; /* save for next restart */
+
+ /*
+ * Read current register values
+ */
+
+ cfg = SBMAC_READCSR(s->sbm_maccfg);
+
+ /*
+ * Mask off the stuff we're about to change
+ */
+
+ cfg &= ~(M_MAC_FC_SEL | M_MAC_FC_CMD | M_MAC_HDX_EN);
+
+
+ switch (duplex) {
+ case sbmac_duplex_half:
+ switch (fc) {
+ case sbmac_fc_disabled:
+ cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_DISABLED;
+ break;
+
+ case sbmac_fc_collision:
+ cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENABLED;
+ break;
+
+ case sbmac_fc_carrier:
+ cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENAB_FALSECARR;
+ break;
+
+ case sbmac_fc_auto: /* XXX not implemented */
+ /* fall through */
+ case sbmac_fc_frame: /* not valid in half duplex */
+ default: /* invalid selection */
+ return 0;
+ }
+ break;
+
+ case sbmac_duplex_full:
+ switch (fc) {
+ case sbmac_fc_disabled:
+ cfg |= V_MAC_FC_CMD_DISABLED;
+ break;
+
+ case sbmac_fc_frame:
+ cfg |= V_MAC_FC_CMD_ENABLED;
+ break;
+
+ case sbmac_fc_collision: /* not valid in full duplex */
+ case sbmac_fc_carrier: /* not valid in full duplex */
+ case sbmac_fc_auto: /* XXX not implemented */
+ /* fall through */
+ default:
+ return 0;
+ }
+ break;
+ case sbmac_duplex_auto:
+ /* XXX not implemented */
+ break;
+ }
+
+ /*
+ * Send the bits back to the hardware
+ */
+
+ SBMAC_WRITECSR(s->sbm_maccfg,cfg);
+
+ return 1;
+}
+
+
+
+
+/**********************************************************************
+ * SBMAC_INTR()
+ *
+ * Interrupt handler for MAC interrupts
+ *
+ * Input parameters:
+ * MAC structure
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+static irqreturn_t sbmac_intr(int irq,void *dev_instance,struct pt_regs *rgs)
+{
+ struct net_device *dev = (struct net_device *) dev_instance;
+ struct sbmac_softc *sc = netdev_priv(dev);
+ uint64_t isr;
+ int handled = 0;
+
+ for (;;) {
+
+ /*
+ * Read the ISR (this clears the bits in the real
+ * register, except for counter addr)
+ */
+
+ isr = SBMAC_READCSR(sc->sbm_isr) & ~M_MAC_COUNTER_ADDR;
+
+ if (isr == 0)
+ break;
+
+ handled = 1;
+
+ /*
+ * Transmits on channel 0
+ */
+
+ if (isr & (M_MAC_INT_CHANNEL << S_MAC_TX_CH0)) {
+ sbdma_tx_process(sc,&(sc->sbm_txdma));
+ }
+
+ /*
+ * Receives on channel 0
+ */
+
+ /*
+ * It's important to test all the bits (or at least the
+ * EOP_SEEN bit) when deciding to do the RX process
+ * particularly when coalescing, to make sure we
+ * take care of the following:
+ *
+ * If you have some packets waiting (have been received
+ * but no interrupt) and get a TX interrupt before
+ * the RX timer or counter expires, reading the ISR
+ * above will clear the timer and counter, and you
+ * won't get another interrupt until a packet shows
+ * up to start the timer again. Testing
+ * EOP_SEEN here takes care of this case.
+ * (EOP_SEEN is part of M_MAC_INT_CHANNEL << S_MAC_RX_CH0)
+ */
+
+
+ if (isr & (M_MAC_INT_CHANNEL << S_MAC_RX_CH0)) {
+ sbdma_rx_process(sc,&(sc->sbm_rxdma));
+ }
+ }
+ return IRQ_RETVAL(handled);
+}
+
+
+/**********************************************************************
+ * SBMAC_START_TX(skb,dev)
+ *
+ * Start output on the specified interface. Basically, we
+ * queue as many buffers as we can until the ring fills up, or
+ * we run off the end of the queue, whichever comes first.
+ *
+ * Input parameters:
+ *
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev)
+{
+ struct sbmac_softc *sc = netdev_priv(dev);
+
+ /* lock eth irq */
+ spin_lock_irq (&sc->sbm_lock);
+
+ /*
+ * Put the buffer on the transmit ring. If we
+ * don't have room, stop the queue.
+ */
+
+ if (sbdma_add_txbuffer(&(sc->sbm_txdma),skb)) {
+ /* XXX save skb that we could not send */
+ netif_stop_queue(dev);
+ spin_unlock_irq(&sc->sbm_lock);
+
+ return 1;
+ }
+
+ dev->trans_start = jiffies;
+
+ spin_unlock_irq (&sc->sbm_lock);
+
+ return 0;
+}
+
+/**********************************************************************
+ * SBMAC_SETMULTI(sc)
+ *
+ * Reprogram the multicast table into the hardware, given
+ * the list of multicasts associated with the interface
+ * structure.
+ *
+ * Input parameters:
+ * sc - softc
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+
+static void sbmac_setmulti(struct sbmac_softc *sc)
+{
+ uint64_t reg;
+ sbmac_port_t port;
+ int idx;
+ struct dev_mc_list *mclist;
+ struct net_device *dev = sc->sbm_dev;
+
+ /*
+ * Clear out entire multicast table. We do this by nuking
+ * the entire hash table and all the direct matches except
+ * the first one, which is used for our station address
+ */
+
+ for (idx = 1; idx < MAC_ADDR_COUNT; idx++) {
+ port = sc->sbm_base + R_MAC_ADDR_BASE+(idx*sizeof(uint64_t));
+ SBMAC_WRITECSR(port,0);
+ }
+
+ for (idx = 0; idx < MAC_HASH_COUNT; idx++) {
+ port = sc->sbm_base + R_MAC_HASH_BASE+(idx*sizeof(uint64_t));
+ SBMAC_WRITECSR(port,0);
+ }
+
+ /*
+ * Clear the filter to say we don't want any multicasts.
+ */
+
+ reg = SBMAC_READCSR(sc->sbm_rxfilter);
+ reg &= ~(M_MAC_MCAST_INV | M_MAC_MCAST_EN);
+ SBMAC_WRITECSR(sc->sbm_rxfilter,reg);
+
+ if (dev->flags & IFF_ALLMULTI) {
+ /*
+ * Enable ALL multicasts. Do this by inverting the
+ * multicast enable bit.
+ */
+ reg = SBMAC_READCSR(sc->sbm_rxfilter);
+ reg |= (M_MAC_MCAST_INV | M_MAC_MCAST_EN);
+ SBMAC_WRITECSR(sc->sbm_rxfilter,reg);
+ return;
+ }
+
+
+ /*
+ * Progam new multicast entries. For now, only use the
+ * perfect filter. In the future we'll need to use the
+ * hash filter if the perfect filter overflows
+ */
+
+ /* XXX only using perfect filter for now, need to use hash
+ * XXX if the table overflows */
+
+ idx = 1; /* skip station address */
+ mclist = dev->mc_list;
+ while (mclist && (idx < MAC_ADDR_COUNT)) {
+ reg = sbmac_addr2reg(mclist->dmi_addr);
+ port = sc->sbm_base + R_MAC_ADDR_BASE+(idx * sizeof(uint64_t));
+ SBMAC_WRITECSR(port,reg);
+ idx++;
+ mclist = mclist->next;
+ }
+
+ /*
+ * Enable the "accept multicast bits" if we programmed at least one
+ * multicast.
+ */
+
+ if (idx > 1) {
+ reg = SBMAC_READCSR(sc->sbm_rxfilter);
+ reg |= M_MAC_MCAST_EN;
+ SBMAC_WRITECSR(sc->sbm_rxfilter,reg);
+ }
+}
+
+
+
+#if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR)
+/**********************************************************************
+ * SBMAC_PARSE_XDIGIT(str)
+ *
+ * Parse a hex digit, returning its value
+ *
+ * Input parameters:
+ * str - character
+ *
+ * Return value:
+ * hex value, or -1 if invalid
+ ********************************************************************* */
+
+static int sbmac_parse_xdigit(char str)
+{
+ int digit;
+
+ if ((str >= '0') && (str <= '9'))
+ digit = str - '0';
+ else if ((str >= 'a') && (str <= 'f'))
+ digit = str - 'a' + 10;
+ else if ((str >= 'A') && (str <= 'F'))
+ digit = str - 'A' + 10;
+ else
+ return -1;
+
+ return digit;
+}
+
+/**********************************************************************
+ * SBMAC_PARSE_HWADDR(str,hwaddr)
+ *
+ * Convert a string in the form xx:xx:xx:xx:xx:xx into a 6-byte
+ * Ethernet address.
+ *
+ * Input parameters:
+ * str - string
+ * hwaddr - pointer to hardware address
+ *
+ * Return value:
+ * 0 if ok, else -1
+ ********************************************************************* */
+
+static int sbmac_parse_hwaddr(char *str, unsigned char *hwaddr)
+{
+ int digit1,digit2;
+ int idx = 6;
+
+ while (*str && (idx > 0)) {
+ digit1 = sbmac_parse_xdigit(*str);
+ if (digit1 < 0)
+ return -1;
+ str++;
+ if (!*str)
+ return -1;
+
+ if ((*str == ':') || (*str == '-')) {
+ digit2 = digit1;
+ digit1 = 0;
+ }
+ else {
+ digit2 = sbmac_parse_xdigit(*str);
+ if (digit2 < 0)
+ return -1;
+ str++;
+ }
+
+ *hwaddr++ = (digit1 << 4) | digit2;
+ idx--;
+
+ if (*str == '-')
+ str++;
+ if (*str == ':')
+ str++;
+ }
+ return 0;
+}
+#endif
+
+static int sb1250_change_mtu(struct net_device *_dev, int new_mtu)
+{
+ if (new_mtu > ENET_PACKET_SIZE)
+ return -EINVAL;
+ _dev->mtu = new_mtu;
+ printk(KERN_INFO "changing the mtu to %d\n", new_mtu);
+ return 0;
+}
+
+/**********************************************************************
+ * SBMAC_INIT(dev)
+ *
+ * Attach routine - init hardware and hook ourselves into linux
+ *
+ * Input parameters:
+ * dev - net_device structure
+ *
+ * Return value:
+ * status
+ ********************************************************************* */
+
+static int sbmac_init(struct net_device *dev, int idx)
+{
+ struct sbmac_softc *sc;
+ unsigned char *eaddr;
+ uint64_t ea_reg;
+ int i;
+ int err;
+
+ sc = netdev_priv(dev);
+
+ /* Determine controller base address */
+
+ sc->sbm_base = IOADDR(dev->base_addr);
+ sc->sbm_dev = dev;
+ sc->sbe_idx = idx;
+
+ eaddr = sc->sbm_hwaddr;
+
+ /*
+ * Read the ethernet address. The firwmare left this programmed
+ * for us in the ethernet address register for each mac.
+ */
+
+ ea_reg = SBMAC_READCSR(sc->sbm_base + R_MAC_ETHERNET_ADDR);
+ SBMAC_WRITECSR(sc->sbm_base + R_MAC_ETHERNET_ADDR, 0);
+ for (i = 0; i < 6; i++) {
+ eaddr[i] = (uint8_t) (ea_reg & 0xFF);
+ ea_reg >>= 8;
+ }
+
+ for (i = 0; i < 6; i++) {
+ dev->dev_addr[i] = eaddr[i];
+ }
+
+
+ /*
+ * Init packet size
+ */
+
+ sc->sbm_buffersize = ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN;
+
+ /*
+ * Initialize context (get pointers to registers and stuff), then
+ * allocate the memory for the descriptor tables.
+ */
+
+ sbmac_initctx(sc);
+
+ /*
+ * Set up Linux device callins
+ */
+
+ spin_lock_init(&(sc->sbm_lock));
+
+ dev->open = sbmac_open;
+ dev->hard_start_xmit = sbmac_start_tx;
+ dev->stop = sbmac_close;
+ dev->get_stats = sbmac_get_stats;
+ dev->set_multicast_list = sbmac_set_rx_mode;
+ dev->do_ioctl = sbmac_mii_ioctl;
+ dev->tx_timeout = sbmac_tx_timeout;
+ dev->watchdog_timeo = TX_TIMEOUT;
+
+ dev->change_mtu = sb1250_change_mtu;
+
+ /* This is needed for PASS2 for Rx H/W checksum feature */
+ sbmac_set_iphdr_offset(sc);
+
+ err = register_netdev(dev);
+ if (err)
+ goto out_uninit;
+
+ if (periph_rev >= 2) {
+ printk(KERN_INFO "%s: enabling TCP rcv checksum\n",
+ sc->sbm_dev->name);
+ }
+
+ /*
+ * Display Ethernet address (this is called during the config
+ * process so we need to finish off the config message that
+ * was being displayed)
+ */
+ printk(KERN_INFO
+ "%s: SiByte Ethernet at 0x%08lX, address: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ dev->name, dev->base_addr,
+ eaddr[0],eaddr[1],eaddr[2],eaddr[3],eaddr[4],eaddr[5]);
+
+
+ return 0;
+
+out_uninit:
+ sbmac_uninitctx(sc);
+
+ return err;
+}
+
+
+static int sbmac_open(struct net_device *dev)
+{
+ struct sbmac_softc *sc = netdev_priv(dev);
+
+ if (debug > 1) {
+ printk(KERN_DEBUG "%s: sbmac_open() irq %d.\n", dev->name, dev->irq);
+ }
+
+ /*
+ * map/route interrupt (clear status first, in case something
+ * weird is pending; we haven't initialized the mac registers
+ * yet)
+ */
+
+ SBMAC_READCSR(sc->sbm_isr);
+ if (request_irq(dev->irq, &sbmac_intr, SA_SHIRQ, dev->name, dev))
+ return -EBUSY;
+
+ /*
+ * Configure default speed
+ */
+
+ sbmac_mii_poll(sc,noisy_mii);
+
+ /*
+ * Turn on the channel
+ */
+
+ sbmac_set_channel_state(sc,sbmac_state_on);
+
+ /*
+ * XXX Station address is in dev->dev_addr
+ */
+
+ if (dev->if_port == 0)
+ dev->if_port = 0;
+
+ netif_start_queue(dev);
+
+ sbmac_set_rx_mode(dev);
+
+ /* Set the timer to check for link beat. */
+ init_timer(&sc->sbm_timer);
+ sc->sbm_timer.expires = jiffies + 2 * HZ/100;
+ sc->sbm_timer.data = (unsigned long)dev;
+ sc->sbm_timer.function = &sbmac_timer;
+ add_timer(&sc->sbm_timer);
+
+ return 0;
+}
+
+
+
+static int sbmac_mii_poll(struct sbmac_softc *s,int noisy)
+{
+ int bmsr,bmcr,k1stsr,anlpar;
+ int chg;
+ char buffer[100];
+ char *p = buffer;
+
+ /* Read the mode status and mode control registers. */
+ bmsr = sbmac_mii_read(s,s->sbm_phys[0],MII_BMSR);
+ bmcr = sbmac_mii_read(s,s->sbm_phys[0],MII_BMCR);
+
+ /* get the link partner status */
+ anlpar = sbmac_mii_read(s,s->sbm_phys[0],MII_ANLPAR);
+
+ /* if supported, read the 1000baseT register */
+ if (bmsr & BMSR_1000BT_XSR) {
+ k1stsr = sbmac_mii_read(s,s->sbm_phys[0],MII_K1STSR);
+ }
+ else {
+ k1stsr = 0;
+ }
+
+ chg = 0;
+
+ if ((bmsr & BMSR_LINKSTAT) == 0) {
+ /*
+ * If link status is down, clear out old info so that when
+ * it comes back up it will force us to reconfigure speed
+ */
+ s->sbm_phy_oldbmsr = 0;
+ s->sbm_phy_oldanlpar = 0;
+ s->sbm_phy_oldk1stsr = 0;
+ return 0;
+ }
+
+ if ((s->sbm_phy_oldbmsr != bmsr) ||
+ (s->sbm_phy_oldanlpar != anlpar) ||
+ (s->sbm_phy_oldk1stsr != k1stsr)) {
+ if (debug > 1) {
+ printk(KERN_DEBUG "%s: bmsr:%x/%x anlpar:%x/%x k1stsr:%x/%x\n",
+ s->sbm_dev->name,
+ s->sbm_phy_oldbmsr,bmsr,
+ s->sbm_phy_oldanlpar,anlpar,
+ s->sbm_phy_oldk1stsr,k1stsr);
+ }
+ s->sbm_phy_oldbmsr = bmsr;
+ s->sbm_phy_oldanlpar = anlpar;
+ s->sbm_phy_oldk1stsr = k1stsr;
+ chg = 1;
+ }
+
+ if (chg == 0)
+ return 0;
+
+ p += sprintf(p,"Link speed: ");
+
+ if (k1stsr & K1STSR_LP1KFD) {
+ s->sbm_speed = sbmac_speed_1000;
+ s->sbm_duplex = sbmac_duplex_full;
+ s->sbm_fc = sbmac_fc_frame;
+ p += sprintf(p,"1000BaseT FDX");
+ }
+ else if (k1stsr & K1STSR_LP1KHD) {
+ s->sbm_speed = sbmac_speed_1000;
+ s->sbm_duplex = sbmac_duplex_half;
+ s->sbm_fc = sbmac_fc_disabled;
+ p += sprintf(p,"1000BaseT HDX");
+ }
+ else if (anlpar & ANLPAR_TXFD) {
+ s->sbm_speed = sbmac_speed_100;
+ s->sbm_duplex = sbmac_duplex_full;
+ s->sbm_fc = (anlpar & ANLPAR_PAUSE) ? sbmac_fc_frame : sbmac_fc_disabled;
+ p += sprintf(p,"100BaseT FDX");
+ }
+ else if (anlpar & ANLPAR_TXHD) {
+ s->sbm_speed = sbmac_speed_100;
+ s->sbm_duplex = sbmac_duplex_half;
+ s->sbm_fc = sbmac_fc_disabled;
+ p += sprintf(p,"100BaseT HDX");
+ }
+ else if (anlpar & ANLPAR_10FD) {
+ s->sbm_speed = sbmac_speed_10;
+ s->sbm_duplex = sbmac_duplex_full;
+ s->sbm_fc = sbmac_fc_frame;
+ p += sprintf(p,"10BaseT FDX");
+ }
+ else if (anlpar & ANLPAR_10HD) {
+ s->sbm_speed = sbmac_speed_10;
+ s->sbm_duplex = sbmac_duplex_half;
+ s->sbm_fc = sbmac_fc_collision;
+ p += sprintf(p,"10BaseT HDX");
+ }
+ else {
+ p += sprintf(p,"Unknown");
+ }
+
+ if (noisy) {
+ printk(KERN_INFO "%s: %s\n",s->sbm_dev->name,buffer);
+ }
+
+ return 1;
+}
+
+
+static void sbmac_timer(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *)data;
+ struct sbmac_softc *sc = netdev_priv(dev);
+ int next_tick = HZ;
+ int mii_status;
+
+ spin_lock_irq (&sc->sbm_lock);
+
+ /* make IFF_RUNNING follow the MII status bit "Link established" */
+ mii_status = sbmac_mii_read(sc, sc->sbm_phys[0], MII_BMSR);
+
+ if ( (mii_status & BMSR_LINKSTAT) != (sc->sbm_phy_oldlinkstat) ) {
+ sc->sbm_phy_oldlinkstat = mii_status & BMSR_LINKSTAT;
+ if (mii_status & BMSR_LINKSTAT) {
+ netif_carrier_on(dev);
+ }
+ else {
+ netif_carrier_off(dev);
+ }
+ }
+
+ /*
+ * Poll the PHY to see what speed we should be running at
+ */
+
+ if (sbmac_mii_poll(sc,noisy_mii)) {
+ if (sc->sbm_state != sbmac_state_off) {
+ /*
+ * something changed, restart the channel
+ */
+ if (debug > 1) {
+ printk("%s: restarting channel because speed changed\n",
+ sc->sbm_dev->name);
+ }
+ sbmac_channel_stop(sc);
+ sbmac_channel_start(sc);
+ }
+ }
+
+ spin_unlock_irq (&sc->sbm_lock);
+
+ sc->sbm_timer.expires = jiffies + next_tick;
+ add_timer(&sc->sbm_timer);
+}
+
+
+static void sbmac_tx_timeout (struct net_device *dev)
+{
+ struct sbmac_softc *sc = netdev_priv(dev);
+
+ spin_lock_irq (&sc->sbm_lock);
+
+
+ dev->trans_start = jiffies;
+ sc->sbm_stats.tx_errors++;
+
+ spin_unlock_irq (&sc->sbm_lock);
+
+ printk (KERN_WARNING "%s: Transmit timed out\n",dev->name);
+}
+
+
+
+
+static struct net_device_stats *sbmac_get_stats(struct net_device *dev)
+{
+ struct sbmac_softc *sc = netdev_priv(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&sc->sbm_lock, flags);
+
+ /* XXX update other stats here */
+
+ spin_unlock_irqrestore(&sc->sbm_lock, flags);
+
+ return &sc->sbm_stats;
+}
+
+
+
+static void sbmac_set_rx_mode(struct net_device *dev)
+{
+ unsigned long flags;
+ int msg_flag = 0;
+ struct sbmac_softc *sc = netdev_priv(dev);
+
+ spin_lock_irqsave(&sc->sbm_lock, flags);
+ if ((dev->flags ^ sc->sbm_devflags) & IFF_PROMISC) {
+ /*
+ * Promiscuous changed.
+ */
+
+ if (dev->flags & IFF_PROMISC) {
+ /* Unconditionally log net taps. */
+ msg_flag = 1;
+ sbmac_promiscuous_mode(sc,1);
+ }
+ else {
+ msg_flag = 2;
+ sbmac_promiscuous_mode(sc,0);
+ }
+ }
+ spin_unlock_irqrestore(&sc->sbm_lock, flags);
+
+ if (msg_flag) {
+ printk(KERN_NOTICE "%s: Promiscuous mode %sabled.\n",
+ dev->name,(msg_flag==1)?"en":"dis");
+ }
+
+ /*
+ * Program the multicasts. Do this every time.
+ */
+
+ sbmac_setmulti(sc);
+
+}
+
+static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct sbmac_softc *sc = netdev_priv(dev);
+ u16 *data = (u16 *)&rq->ifr_ifru;
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&sc->sbm_lock, flags);
+ retval = 0;
+
+ switch(cmd) {
+ case SIOCDEVPRIVATE: /* Get the address of the PHY in use. */
+ data[0] = sc->sbm_phys[0] & 0x1f;
+ /* Fall Through */
+ case SIOCDEVPRIVATE+1: /* Read the specified MII register. */
+ data[3] = sbmac_mii_read(sc, data[0] & 0x1f, data[1] & 0x1f);
+ break;
+ case SIOCDEVPRIVATE+2: /* Write the specified MII register */
+ if (!capable(CAP_NET_ADMIN)) {
+ retval = -EPERM;
+ break;
+ }
+ if (debug > 1) {
+ printk(KERN_DEBUG "%s: sbmac_mii_ioctl: write %02X %02X %02X\n",dev->name,
+ data[0],data[1],data[2]);
+ }
+ sbmac_mii_write(sc, data[0] & 0x1f, data[1] & 0x1f, data[2]);
+ break;
+ default:
+ retval = -EOPNOTSUPP;
+ }
+
+ spin_unlock_irqrestore(&sc->sbm_lock, flags);
+ return retval;
+}
+
+static int sbmac_close(struct net_device *dev)
+{
+ struct sbmac_softc *sc = netdev_priv(dev);
+ unsigned long flags;
+ int irq;
+
+ sbmac_set_channel_state(sc,sbmac_state_off);
+
+ del_timer_sync(&sc->sbm_timer);
+
+ spin_lock_irqsave(&sc->sbm_lock, flags);
+
+ netif_stop_queue(dev);
+
+ if (debug > 1) {
+ printk(KERN_DEBUG "%s: Shutting down ethercard\n",dev->name);
+ }
+
+ spin_unlock_irqrestore(&sc->sbm_lock, flags);
+
+ irq = dev->irq;
+ synchronize_irq(irq);
+ free_irq(irq, dev);
+
+ sbdma_emptyring(&(sc->sbm_txdma));
+ sbdma_emptyring(&(sc->sbm_rxdma));
+
+ return 0;
+}
+
+
+
+#if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR)
+static void
+sbmac_setup_hwaddr(int chan,char *addr)
+{
+ uint8_t eaddr[6];
+ uint64_t val;
+ sbmac_port_t port;
+
+ port = A_MAC_CHANNEL_BASE(chan);
+ sbmac_parse_hwaddr(addr,eaddr);
+ val = sbmac_addr2reg(eaddr);
+ SBMAC_WRITECSR(IOADDR(port+R_MAC_ETHERNET_ADDR),val);
+ val = SBMAC_READCSR(IOADDR(port+R_MAC_ETHERNET_ADDR));
+}
+#endif
+
+static struct net_device *dev_sbmac[MAX_UNITS];
+
+static int __init
+sbmac_init_module(void)
+{
+ int idx;
+ struct net_device *dev;
+ sbmac_port_t port;
+ int chip_max_units;
+
+ /*
+ * For bringup when not using the firmware, we can pre-fill
+ * the MAC addresses using the environment variables
+ * specified in this file (or maybe from the config file?)
+ */
+#ifdef SBMAC_ETH0_HWADDR
+ sbmac_setup_hwaddr(0,SBMAC_ETH0_HWADDR);
+#endif
+#ifdef SBMAC_ETH1_HWADDR
+ sbmac_setup_hwaddr(1,SBMAC_ETH1_HWADDR);
+#endif
+#ifdef SBMAC_ETH2_HWADDR
+ sbmac_setup_hwaddr(2,SBMAC_ETH2_HWADDR);
+#endif
+
+ /*
+ * Walk through the Ethernet controllers and find
+ * those who have their MAC addresses set.
+ */
+ switch (soc_type) {
+ case K_SYS_SOC_TYPE_BCM1250:
+ case K_SYS_SOC_TYPE_BCM1250_ALT:
+ chip_max_units = 3;
+ break;
+ case K_SYS_SOC_TYPE_BCM1120:
+ case K_SYS_SOC_TYPE_BCM1125:
+ case K_SYS_SOC_TYPE_BCM1125H:
+ case K_SYS_SOC_TYPE_BCM1250_ALT2: /* Hybrid */
+ chip_max_units = 2;
+ break;
+ default:
+ chip_max_units = 0;
+ break;
+ }
+ if (chip_max_units > MAX_UNITS)
+ chip_max_units = MAX_UNITS;
+
+ for (idx = 0; idx < chip_max_units; idx++) {
+
+ /*
+ * This is the base address of the MAC.
+ */
+
+ port = A_MAC_CHANNEL_BASE(idx);
+
+ /*
+ * The R_MAC_ETHERNET_ADDR register will be set to some nonzero
+ * value for us by the firmware if we're going to use this MAC.
+ * If we find a zero, skip this MAC.
+ */
+
+ sbmac_orig_hwaddr[idx] = SBMAC_READCSR(IOADDR(port+R_MAC_ETHERNET_ADDR));
+ if (sbmac_orig_hwaddr[idx] == 0) {
+ printk(KERN_DEBUG "sbmac: not configuring MAC at "
+ "%lx\n", port);
+ continue;
+ }
+
+ /*
+ * Okay, cool. Initialize this MAC.
+ */
+
+ dev = alloc_etherdev(sizeof(struct sbmac_softc));
+ if (!dev)
+ return -ENOMEM; /* return ENOMEM */
+
+ printk(KERN_DEBUG "sbmac: configuring MAC at %lx\n", port);
+
+ dev->irq = K_INT_MAC_0 + idx;
+ dev->base_addr = port;
+ dev->mem_end = 0;
+ if (sbmac_init(dev, idx)) {
+ port = A_MAC_CHANNEL_BASE(idx);
+ SBMAC_WRITECSR(IOADDR(port+R_MAC_ETHERNET_ADDR),
+ sbmac_orig_hwaddr[idx]);
+ free_netdev(dev);
+ continue;
+ }
+ dev_sbmac[idx] = dev;
+ }
+ return 0;
+}
+
+
+static void __exit
+sbmac_cleanup_module(void)
+{
+ struct net_device *dev;
+ int idx;
+
+ for (idx = 0; idx < MAX_UNITS; idx++) {
+ struct sbmac_softc *sc;
+ dev = dev_sbmac[idx];
+ if (!dev)
+ continue;
+
+ sc = netdev_priv(dev);
+ unregister_netdev(dev);
+ sbmac_uninitctx(sc);
+ free_netdev(dev);
+ }
+}
+
+module_init(sbmac_init_module);
+module_exit(sbmac_cleanup_module);