summaryrefslogtreecommitdiffstats
path: root/drivers/net/tulip/tulip.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/tulip/tulip.h')
-rw-r--r--drivers/net/tulip/tulip.h493
1 files changed, 493 insertions, 0 deletions
diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h
new file mode 100644
index 000000000000..20346d847d9e
--- /dev/null
+++ b/drivers/net/tulip/tulip.h
@@ -0,0 +1,493 @@
+/*
+ drivers/net/tulip/tulip.h
+
+ Copyright 2000,2001 The Linux Kernel Team
+ Written/copyright 1994-2001 by Donald Becker.
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
+ for more information on this driver, or visit the project
+ Web page at http://sourceforge.net/projects/tulip/
+
+*/
+
+#ifndef __NET_TULIP_H__
+#define __NET_TULIP_H__
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/netdevice.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+
+
+/* undefine, or define to various debugging levels (>4 == obscene levels) */
+#define TULIP_DEBUG 1
+
+/* undefine USE_IO_OPS for MMIO, define for PIO */
+#ifdef CONFIG_TULIP_MMIO
+# undef USE_IO_OPS
+#else
+# define USE_IO_OPS 1
+#endif
+
+
+
+struct tulip_chip_table {
+ char *chip_name;
+ int io_size;
+ int valid_intrs; /* CSR7 interrupt enable settings */
+ int flags;
+ void (*media_timer) (unsigned long data);
+};
+
+
+enum tbl_flag {
+ HAS_MII = 0x0001,
+ HAS_MEDIA_TABLE = 0x0002,
+ CSR12_IN_SROM = 0x0004,
+ ALWAYS_CHECK_MII = 0x0008,
+ HAS_ACPI = 0x0010,
+ MC_HASH_ONLY = 0x0020, /* Hash-only multicast filter. */
+ HAS_PNICNWAY = 0x0080,
+ HAS_NWAY = 0x0040, /* Uses internal NWay xcvr. */
+ HAS_INTR_MITIGATION = 0x0100,
+ IS_ASIX = 0x0200,
+ HAS_8023X = 0x0400,
+ COMET_MAC_ADDR = 0x0800,
+ HAS_PCI_MWI = 0x1000,
+ HAS_PHY_IRQ = 0x2000,
+ HAS_SWAPPED_SEEPROM = 0x4000,
+ NEEDS_FAKE_MEDIA_TABLE = 0x8000,
+};
+
+
+/* chip types. careful! order is VERY IMPORTANT here, as these
+ * are used throughout the driver as indices into arrays */
+/* Note 21142 == 21143. */
+enum chips {
+ DC21040 = 0,
+ DC21041 = 1,
+ DC21140 = 2,
+ DC21142 = 3, DC21143 = 3,
+ LC82C168,
+ MX98713,
+ MX98715,
+ MX98725,
+ AX88140,
+ PNIC2,
+ COMET,
+ COMPEX9881,
+ I21145,
+ DM910X,
+ CONEXANT,
+ ULI526X
+};
+
+
+enum MediaIs {
+ MediaIsFD = 1,
+ MediaAlwaysFD = 2,
+ MediaIsMII = 4,
+ MediaIsFx = 8,
+ MediaIs100 = 16
+};
+
+
+/* Offsets to the Command and Status Registers, "CSRs". All accesses
+ must be longword instructions and quadword aligned. */
+enum tulip_offsets {
+ CSR0 = 0,
+ CSR1 = 0x08,
+ CSR2 = 0x10,
+ CSR3 = 0x18,
+ CSR4 = 0x20,
+ CSR5 = 0x28,
+ CSR6 = 0x30,
+ CSR7 = 0x38,
+ CSR8 = 0x40,
+ CSR9 = 0x48,
+ CSR10 = 0x50,
+ CSR11 = 0x58,
+ CSR12 = 0x60,
+ CSR13 = 0x68,
+ CSR14 = 0x70,
+ CSR15 = 0x78,
+};
+
+/* register offset and bits for CFDD PCI config reg */
+enum pci_cfg_driver_reg {
+ CFDD = 0x40,
+ CFDD_Sleep = (1 << 31),
+ CFDD_Snooze = (1 << 30),
+};
+
+#define RxPollInt (RxIntr|RxNoBuf|RxDied|RxJabber)
+
+/* The bits in the CSR5 status registers, mostly interrupt sources. */
+enum status_bits {
+ TimerInt = 0x800,
+ SytemError = 0x2000,
+ TPLnkFail = 0x1000,
+ TPLnkPass = 0x10,
+ NormalIntr = 0x10000,
+ AbnormalIntr = 0x8000,
+ RxJabber = 0x200,
+ RxDied = 0x100,
+ RxNoBuf = 0x80,
+ RxIntr = 0x40,
+ TxFIFOUnderflow = 0x20,
+ TxJabber = 0x08,
+ TxNoBuf = 0x04,
+ TxDied = 0x02,
+ TxIntr = 0x01,
+};
+
+/* bit mask for CSR5 TX/RX process state */
+#define CSR5_TS 0x00700000
+#define CSR5_RS 0x000e0000
+
+enum tulip_mode_bits {
+ TxThreshold = (1 << 22),
+ FullDuplex = (1 << 9),
+ TxOn = 0x2000,
+ AcceptBroadcast = 0x0100,
+ AcceptAllMulticast = 0x0080,
+ AcceptAllPhys = 0x0040,
+ AcceptRunt = 0x0008,
+ RxOn = 0x0002,
+ RxTx = (TxOn | RxOn),
+};
+
+
+enum tulip_busconfig_bits {
+ MWI = (1 << 24),
+ MRL = (1 << 23),
+ MRM = (1 << 21),
+ CALShift = 14,
+ BurstLenShift = 8,
+};
+
+
+/* The Tulip Rx and Tx buffer descriptors. */
+struct tulip_rx_desc {
+ s32 status;
+ s32 length;
+ u32 buffer1;
+ u32 buffer2;
+};
+
+
+struct tulip_tx_desc {
+ s32 status;
+ s32 length;
+ u32 buffer1;
+ u32 buffer2; /* We use only buffer 1. */
+};
+
+
+enum desc_status_bits {
+ DescOwned = 0x80000000,
+ RxDescFatalErr = 0x8000,
+ RxWholePkt = 0x0300,
+};
+
+
+enum t21143_csr6_bits {
+ csr6_sc = (1<<31),
+ csr6_ra = (1<<30),
+ csr6_ign_dest_msb = (1<<26),
+ csr6_mbo = (1<<25),
+ csr6_scr = (1<<24), /* scramble mode flag: can't be set */
+ csr6_pcs = (1<<23), /* Enables PCS functions (symbol mode requires csr6_ps be set) default is set */
+ csr6_ttm = (1<<22), /* Transmit Threshold Mode, set for 10baseT, 0 for 100BaseTX */
+ csr6_sf = (1<<21), /* Store and forward. If set ignores TR bits */
+ csr6_hbd = (1<<19), /* Heart beat disable. Disables SQE function in 10baseT */
+ csr6_ps = (1<<18), /* Port Select. 0 (defualt) = 10baseT, 1 = 100baseTX: can't be set */
+ csr6_ca = (1<<17), /* Collision Offset Enable. If set uses special algorithm in low collision situations */
+ csr6_trh = (1<<15), /* Transmit Threshold high bit */
+ csr6_trl = (1<<14), /* Transmit Threshold low bit */
+
+ /***************************************************************
+ * This table shows transmit threshold values based on media *
+ * and these two registers (from PNIC1 & 2 docs) Note: this is *
+ * all meaningless if sf is set. *
+ ***************************************************************/
+
+ /***********************************
+ * (trh,trl) * 100BaseTX * 10BaseT *
+ ***********************************
+ * (0,0) * 128 * 72 *
+ * (0,1) * 256 * 96 *
+ * (1,0) * 512 * 128 *
+ * (1,1) * 1024 * 160 *
+ ***********************************/
+
+ csr6_fc = (1<<12), /* Forces a collision in next transmission (for testing in loopback mode) */
+ csr6_om_int_loop = (1<<10), /* internal (FIFO) loopback flag */
+ csr6_om_ext_loop = (1<<11), /* external (PMD) loopback flag */
+ /* set both and you get (PHY) loopback */
+ csr6_fd = (1<<9), /* Full duplex mode, disables hearbeat, no loopback */
+ csr6_pm = (1<<7), /* Pass All Multicast */
+ csr6_pr = (1<<6), /* Promiscuous mode */
+ csr6_sb = (1<<5), /* Start(1)/Stop(0) backoff counter */
+ csr6_if = (1<<4), /* Inverse Filtering, rejects only addresses in address table: can't be set */
+ csr6_pb = (1<<3), /* Pass Bad Frames, (1) causes even bad frames to be passed on */
+ csr6_ho = (1<<2), /* Hash-only filtering mode: can't be set */
+ csr6_hp = (1<<0), /* Hash/Perfect Receive Filtering Mode: can't be set */
+
+ csr6_mask_capture = (csr6_sc | csr6_ca),
+ csr6_mask_defstate = (csr6_mask_capture | csr6_mbo),
+ csr6_mask_hdcap = (csr6_mask_defstate | csr6_hbd | csr6_ps),
+ csr6_mask_hdcaptt = (csr6_mask_hdcap | csr6_trh | csr6_trl),
+ csr6_mask_fullcap = (csr6_mask_hdcaptt | csr6_fd),
+ csr6_mask_fullpromisc = (csr6_pr | csr6_pm),
+ csr6_mask_filters = (csr6_hp | csr6_ho | csr6_if),
+ csr6_mask_100bt = (csr6_scr | csr6_pcs | csr6_hbd),
+};
+
+
+/* Keep the ring sizes a power of two for efficiency.
+ Making the Tx ring too large decreases the effectiveness of channel
+ bonding and packet priority.
+ There are no ill effects from too-large receive rings. */
+
+#define TX_RING_SIZE 32
+#define RX_RING_SIZE 128
+#define MEDIA_MASK 31
+
+#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer. */
+
+#define TULIP_MIN_CACHE_LINE 8 /* in units of 32-bit words */
+
+#if defined(__sparc__) || defined(__hppa__)
+/* The UltraSparc PCI controllers will disconnect at every 64-byte
+ * crossing anyways so it makes no sense to tell Tulip to burst
+ * any more than that.
+ */
+#define TULIP_MAX_CACHE_LINE 16 /* in units of 32-bit words */
+#else
+#define TULIP_MAX_CACHE_LINE 32 /* in units of 32-bit words */
+#endif
+
+
+/* Ring-wrap flag in length field, use for last ring entry.
+ 0x01000000 means chain on buffer2 address,
+ 0x02000000 means use the ring start address in CSR2/3.
+ Note: Some work-alike chips do not function correctly in chained mode.
+ The ASIX chip works only in chained mode.
+ Thus we indicates ring mode, but always write the 'next' field for
+ chained mode as well.
+*/
+#define DESC_RING_WRAP 0x02000000
+
+
+#define EEPROM_SIZE 512 /* 2 << EEPROM_ADDRLEN */
+
+
+#define RUN_AT(x) (jiffies + (x))
+
+#if defined(__i386__) /* AKA get_unaligned() */
+#define get_u16(ptr) (*(u16 *)(ptr))
+#else
+#define get_u16(ptr) (((u8*)(ptr))[0] + (((u8*)(ptr))[1]<<8))
+#endif
+
+struct medialeaf {
+ u8 type;
+ u8 media;
+ unsigned char *leafdata;
+};
+
+
+struct mediatable {
+ u16 defaultmedia;
+ u8 leafcount;
+ u8 csr12dir; /* General purpose pin directions. */
+ unsigned has_mii:1;
+ unsigned has_nonmii:1;
+ unsigned has_reset:6;
+ u32 csr15dir;
+ u32 csr15val; /* 21143 NWay setting. */
+ struct medialeaf mleaf[0];
+};
+
+
+struct mediainfo {
+ struct mediainfo *next;
+ int info_type;
+ int index;
+ unsigned char *info;
+};
+
+struct ring_info {
+ struct sk_buff *skb;
+ dma_addr_t mapping;
+};
+
+
+struct tulip_private {
+ const char *product_name;
+ struct net_device *next_module;
+ struct tulip_rx_desc *rx_ring;
+ struct tulip_tx_desc *tx_ring;
+ dma_addr_t rx_ring_dma;
+ dma_addr_t tx_ring_dma;
+ /* The saved address of a sent-in-place packet/buffer, for skfree(). */
+ struct ring_info tx_buffers[TX_RING_SIZE];
+ /* The addresses of receive-in-place skbuffs. */
+ struct ring_info rx_buffers[RX_RING_SIZE];
+ u16 setup_frame[96]; /* Pseudo-Tx frame to init address table. */
+ int chip_id;
+ int revision;
+ int flags;
+ struct net_device_stats stats;
+ struct timer_list timer; /* Media selection timer. */
+ struct timer_list oom_timer; /* Out of memory timer. */
+ u32 mc_filter[2];
+ spinlock_t lock;
+ spinlock_t mii_lock;
+ unsigned int cur_rx, cur_tx; /* The next free ring entry */
+ unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */
+
+#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
+ int mit_on;
+#endif
+ unsigned int full_duplex:1; /* Full-duplex operation requested. */
+ unsigned int full_duplex_lock:1;
+ unsigned int fake_addr:1; /* Multiport board faked address. */
+ unsigned int default_port:4; /* Last dev->if_port value. */
+ unsigned int media2:4; /* Secondary monitored media port. */
+ unsigned int medialock:1; /* Don't sense media type. */
+ unsigned int mediasense:1; /* Media sensing in progress. */
+ unsigned int nway:1, nwayset:1; /* 21143 internal NWay. */
+ unsigned int csr0; /* CSR0 setting. */
+ unsigned int csr6; /* Current CSR6 control settings. */
+ unsigned char eeprom[EEPROM_SIZE]; /* Serial EEPROM contents. */
+ void (*link_change) (struct net_device * dev, int csr5);
+ u16 sym_advertise, mii_advertise; /* NWay capabilities advertised. */
+ u16 lpar; /* 21143 Link partner ability. */
+ u16 advertising[4];
+ signed char phys[4], mii_cnt; /* MII device addresses. */
+ struct mediatable *mtable;
+ int cur_index; /* Current media index. */
+ int saved_if_port;
+ struct pci_dev *pdev;
+ int ttimer;
+ int susp_rx;
+ unsigned long nir;
+ void __iomem *base_addr;
+ int csr12_shadow;
+ int pad0; /* Used for 8-byte alignment */
+};
+
+
+struct eeprom_fixup {
+ char *name;
+ unsigned char addr0;
+ unsigned char addr1;
+ unsigned char addr2;
+ u16 newtable[32]; /* Max length below. */
+};
+
+
+/* 21142.c */
+extern u16 t21142_csr14[];
+void t21142_timer(unsigned long data);
+void t21142_start_nway(struct net_device *dev);
+void t21142_lnk_change(struct net_device *dev, int csr5);
+
+
+/* PNIC2.c */
+void pnic2_lnk_change(struct net_device *dev, int csr5);
+void pnic2_timer(unsigned long data);
+void pnic2_start_nway(struct net_device *dev);
+void pnic2_lnk_change(struct net_device *dev, int csr5);
+
+/* eeprom.c */
+void tulip_parse_eeprom(struct net_device *dev);
+int tulip_read_eeprom(struct net_device *dev, int location, int addr_len);
+
+/* interrupt.c */
+extern unsigned int tulip_max_interrupt_work;
+extern int tulip_rx_copybreak;
+irqreturn_t tulip_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
+int tulip_refill_rx(struct net_device *dev);
+#ifdef CONFIG_TULIP_NAPI
+int tulip_poll(struct net_device *dev, int *budget);
+#endif
+
+
+/* media.c */
+int tulip_mdio_read(struct net_device *dev, int phy_id, int location);
+void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int value);
+void tulip_select_media(struct net_device *dev, int startup);
+int tulip_check_duplex(struct net_device *dev);
+void tulip_find_mii (struct net_device *dev, int board_idx);
+
+/* pnic.c */
+void pnic_do_nway(struct net_device *dev);
+void pnic_lnk_change(struct net_device *dev, int csr5);
+void pnic_timer(unsigned long data);
+
+/* timer.c */
+void tulip_timer(unsigned long data);
+void mxic_timer(unsigned long data);
+void comet_timer(unsigned long data);
+
+/* tulip_core.c */
+extern int tulip_debug;
+extern const char * const medianame[];
+extern const char tulip_media_cap[];
+extern struct tulip_chip_table tulip_tbl[];
+void oom_timer(unsigned long data);
+extern u8 t21040_csr13[];
+
+static inline void tulip_start_rxtx(struct tulip_private *tp)
+{
+ void __iomem *ioaddr = tp->base_addr;
+ iowrite32(tp->csr6 | RxTx, ioaddr + CSR6);
+ barrier();
+ (void) ioread32(ioaddr + CSR6); /* mmio sync */
+}
+
+static inline void tulip_stop_rxtx(struct tulip_private *tp)
+{
+ void __iomem *ioaddr = tp->base_addr;
+ u32 csr6 = ioread32(ioaddr + CSR6);
+
+ if (csr6 & RxTx) {
+ unsigned i=1300/10;
+ iowrite32(csr6 & ~RxTx, ioaddr + CSR6);
+ barrier();
+ /* wait until in-flight frame completes.
+ * Max time @ 10BT: 1500*8b/10Mbps == 1200us (+ 100us margin)
+ * Typically expect this loop to end in < 50 us on 100BT.
+ */
+ while (--i && (ioread32(ioaddr + CSR5) & (CSR5_TS|CSR5_RS)))
+ udelay(10);
+
+ if (!i)
+ printk(KERN_DEBUG "%s: tulip_stop_rxtx() failed\n",
+ pci_name(tp->pdev));
+ }
+}
+
+static inline void tulip_restart_rxtx(struct tulip_private *tp)
+{
+ if(!(tp->chip_id == ULI526X &&
+ (tp->revision == 0x40 || tp->revision == 0x50))) {
+ tulip_stop_rxtx(tp);
+ udelay(5);
+ }
+ tulip_start_rxtx(tp);
+}
+
+#endif /* __NET_TULIP_H__ */