diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/wmi.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/wmi.h | 61 |
1 files changed, 61 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 0087d699b85b..4b5e7d3d32b6 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -3003,6 +3003,18 @@ struct wmi_vdev_install_key_arg { const void *key_data; }; +/* + * vdev fixed rate format: + * - preamble - b7:b6 - see WMI_RATE_PREMABLE_ + * - nss - b5:b4 - ss number (0 mean 1ss) + * - rate_mcs - b3:b0 - as below + * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps, + * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s) + * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps, + * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps + * HT/VHT: MCS index + */ + /* Preamble types to be used with VDEV fixed rate configuration */ enum wmi_rate_preamble { WMI_RATE_PREAMBLE_OFDM, @@ -4090,6 +4102,54 @@ struct wmi_force_fw_hang_cmd { __le32 delay_ms; } __packed; +enum ath10k_dbglog_level { + ATH10K_DBGLOG_LEVEL_VERBOSE = 0, + ATH10K_DBGLOG_LEVEL_INFO = 1, + ATH10K_DBGLOG_LEVEL_WARN = 2, + ATH10K_DBGLOG_LEVEL_ERR = 3, +}; + +/* VAP ids to enable dbglog */ +#define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0 +#define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff + +/* to enable dbglog in the firmware */ +#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16 +#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000 + +/* timestamp resolution */ +#define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17 +#define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000 + +/* number of queued messages before sending them to the host */ +#define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20 +#define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000 + +/* + * Log levels to enable. This defines the minimum level to enable, this is + * not a bitmask. See enum ath10k_dbglog_level for the values. + */ +#define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28 +#define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000 + +/* + * Note: this is a cleaned up version of a struct firmware uses. For + * example, config_valid was hidden inside an array. + */ +struct wmi_dbglog_cfg_cmd { + /* bitmask to hold mod id config*/ + __le32 module_enable; + + /* see ATH10K_DBGLOG_CFG_ */ + __le32 config_enable; + + /* mask of module id bits to be changed */ + __le32 module_valid; + + /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ + __le32 config_valid; +} __packed; + #define ATH10K_RTS_MAX 2347 #define ATH10K_FRAGMT_THRESHOLD_MIN 540 #define ATH10K_FRAGMT_THRESHOLD_MAX 2346 @@ -4167,5 +4227,6 @@ int ath10k_wmi_request_stats(struct ath10k *ar, enum wmi_stats_id stats_id); int ath10k_wmi_force_fw_hang(struct ath10k *ar, enum wmi_force_fw_hang_type type, u32 delay_ms); int ath10k_wmi_mgmt_tx(struct ath10k *ar, struct sk_buff *skb); +int ath10k_wmi_dbglog_cfg(struct ath10k *ar, u32 module_enable); #endif /* _WMI_H_ */ |