diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/base.c')
-rw-r--r-- | drivers/net/wireless/ath/ath5k/base.c | 2693 |
1 files changed, 1486 insertions, 1207 deletions
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 648972df369d..8251946842e6 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -48,9 +48,11 @@ #include <linux/netdevice.h> #include <linux/cache.h> #include <linux/pci.h> +#include <linux/pci-aspm.h> #include <linux/ethtool.h> #include <linux/uaccess.h> #include <linux/slab.h> +#include <linux/etherdevice.h> #include <net/ieee80211_radiotap.h> @@ -60,6 +62,7 @@ #include "reg.h" #include "debug.h" #include "ani.h" +#include "../debug.h" static int modparam_nohwcrypt; module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); @@ -69,11 +72,6 @@ static int modparam_all_channels; module_param_named(all_channels, modparam_all_channels, bool, S_IRUGO); MODULE_PARM_DESC(all_channels, "Expose all channels the device can use."); - -/******************\ -* Internal defines * -\******************/ - /* Module info */ MODULE_AUTHOR("Jiri Slaby"); MODULE_AUTHOR("Nick Kossifidis"); @@ -82,6 +80,10 @@ MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards"); MODULE_LICENSE("Dual BSD/GPL"); MODULE_VERSION("0.6.0 (EXPERIMENTAL)"); +static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan); +static int ath5k_beacon_update(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); +static void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf); /* Known PCI ids */ static DEFINE_PCI_DEVICE_TABLE(ath5k_pci_id_table) = { @@ -189,129 +191,7 @@ static const struct ieee80211_rate ath5k_rates[] = { /* XR missing */ }; -/* - * Prototypes - PCI stack related functions - */ -static int __devinit ath5k_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *id); -static void __devexit ath5k_pci_remove(struct pci_dev *pdev); -#ifdef CONFIG_PM_SLEEP -static int ath5k_pci_suspend(struct device *dev); -static int ath5k_pci_resume(struct device *dev); - -static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume); -#define ATH5K_PM_OPS (&ath5k_pm_ops) -#else -#define ATH5K_PM_OPS NULL -#endif /* CONFIG_PM_SLEEP */ - -static struct pci_driver ath5k_pci_driver = { - .name = KBUILD_MODNAME, - .id_table = ath5k_pci_id_table, - .probe = ath5k_pci_probe, - .remove = __devexit_p(ath5k_pci_remove), - .driver.pm = ATH5K_PM_OPS, -}; - - - -/* - * Prototypes - MAC 802.11 stack related functions - */ -static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb); -static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ath5k_txq *txq); -static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan); -static int ath5k_start(struct ieee80211_hw *hw); -static void ath5k_stop(struct ieee80211_hw *hw); -static int ath5k_add_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif); -static void ath5k_remove_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif); -static int ath5k_config(struct ieee80211_hw *hw, u32 changed); -static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw, - struct netdev_hw_addr_list *mc_list); -static void ath5k_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *new_flags, - u64 multicast); -static int ath5k_set_key(struct ieee80211_hw *hw, - enum set_key_cmd cmd, - struct ieee80211_vif *vif, struct ieee80211_sta *sta, - struct ieee80211_key_conf *key); -static int ath5k_get_stats(struct ieee80211_hw *hw, - struct ieee80211_low_level_stats *stats); -static int ath5k_get_survey(struct ieee80211_hw *hw, - int idx, struct survey_info *survey); -static u64 ath5k_get_tsf(struct ieee80211_hw *hw); -static void ath5k_set_tsf(struct ieee80211_hw *hw, u64 tsf); -static void ath5k_reset_tsf(struct ieee80211_hw *hw); -static int ath5k_beacon_update(struct ieee80211_hw *hw, - struct ieee80211_vif *vif); -static void ath5k_bss_info_changed(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_bss_conf *bss_conf, - u32 changes); -static void ath5k_sw_scan_start(struct ieee80211_hw *hw); -static void ath5k_sw_scan_complete(struct ieee80211_hw *hw); -static void ath5k_set_coverage_class(struct ieee80211_hw *hw, - u8 coverage_class); - -static const struct ieee80211_ops ath5k_hw_ops = { - .tx = ath5k_tx, - .start = ath5k_start, - .stop = ath5k_stop, - .add_interface = ath5k_add_interface, - .remove_interface = ath5k_remove_interface, - .config = ath5k_config, - .prepare_multicast = ath5k_prepare_multicast, - .configure_filter = ath5k_configure_filter, - .set_key = ath5k_set_key, - .get_stats = ath5k_get_stats, - .get_survey = ath5k_get_survey, - .conf_tx = NULL, - .get_tsf = ath5k_get_tsf, - .set_tsf = ath5k_set_tsf, - .reset_tsf = ath5k_reset_tsf, - .bss_info_changed = ath5k_bss_info_changed, - .sw_scan_start = ath5k_sw_scan_start, - .sw_scan_complete = ath5k_sw_scan_complete, - .set_coverage_class = ath5k_set_coverage_class, -}; - -/* - * Prototypes - Internal functions - */ -/* Attach detach */ -static int ath5k_attach(struct pci_dev *pdev, - struct ieee80211_hw *hw); -static void ath5k_detach(struct pci_dev *pdev, - struct ieee80211_hw *hw); -/* Channel/mode setup */ -static inline short ath5k_ieee2mhz(short chan); -static unsigned int ath5k_copy_channels(struct ath5k_hw *ah, - struct ieee80211_channel *channels, - unsigned int mode, - unsigned int max); -static int ath5k_setup_bands(struct ieee80211_hw *hw); -static int ath5k_chan_set(struct ath5k_softc *sc, - struct ieee80211_channel *chan); -static void ath5k_setcurmode(struct ath5k_softc *sc, - unsigned int mode); -static void ath5k_mode_setup(struct ath5k_softc *sc); - -/* Descriptor setup */ -static int ath5k_desc_alloc(struct ath5k_softc *sc, - struct pci_dev *pdev); -static void ath5k_desc_free(struct ath5k_softc *sc, - struct pci_dev *pdev); -/* Buffers setup */ -static int ath5k_rxbuf_setup(struct ath5k_softc *sc, - struct ath5k_buf *bf); -static int ath5k_txbuf_setup(struct ath5k_softc *sc, - struct ath5k_buf *bf, - struct ath5k_txq *txq, int padsize); -static inline void ath5k_txbuf_free(struct ath5k_softc *sc, +static inline void ath5k_txbuf_free_skb(struct ath5k_softc *sc, struct ath5k_buf *bf) { BUG_ON(!bf); @@ -321,9 +201,11 @@ static inline void ath5k_txbuf_free(struct ath5k_softc *sc, PCI_DMA_TODEVICE); dev_kfree_skb_any(bf->skb); bf->skb = NULL; + bf->skbaddr = 0; + bf->desc->ds_data = 0; } -static inline void ath5k_rxbuf_free(struct ath5k_softc *sc, +static inline void ath5k_rxbuf_free_skb(struct ath5k_softc *sc, struct ath5k_buf *bf) { struct ath5k_hw *ah = sc->ah; @@ -336,39 +218,11 @@ static inline void ath5k_rxbuf_free(struct ath5k_softc *sc, PCI_DMA_FROMDEVICE); dev_kfree_skb_any(bf->skb); bf->skb = NULL; + bf->skbaddr = 0; + bf->desc->ds_data = 0; } -/* Queues setup */ -static struct ath5k_txq *ath5k_txq_setup(struct ath5k_softc *sc, - int qtype, int subtype); -static int ath5k_beaconq_setup(struct ath5k_hw *ah); -static int ath5k_beaconq_config(struct ath5k_softc *sc); -static void ath5k_txq_drainq(struct ath5k_softc *sc, - struct ath5k_txq *txq); -static void ath5k_txq_cleanup(struct ath5k_softc *sc); -static void ath5k_txq_release(struct ath5k_softc *sc); -/* Rx handling */ -static int ath5k_rx_start(struct ath5k_softc *sc); -static void ath5k_rx_stop(struct ath5k_softc *sc); -static unsigned int ath5k_rx_decrypted(struct ath5k_softc *sc, - struct ath5k_desc *ds, - struct sk_buff *skb, - struct ath5k_rx_status *rs); -static void ath5k_tasklet_rx(unsigned long data); -/* Tx handling */ -static void ath5k_tx_processq(struct ath5k_softc *sc, - struct ath5k_txq *txq); -static void ath5k_tasklet_tx(unsigned long data); -/* Beacon handling */ -static int ath5k_beacon_setup(struct ath5k_softc *sc, - struct ath5k_buf *bf); -static void ath5k_beacon_send(struct ath5k_softc *sc); -static void ath5k_beacon_config(struct ath5k_softc *sc); -static void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf); -static void ath5k_tasklet_beacon(unsigned long data); -static void ath5k_tasklet_ani(unsigned long data); - static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp) { u64 tsf = ath5k_hw_get_tsf64(ah); @@ -379,50 +233,6 @@ static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp) return (tsf & ~0x7fff) | rstamp; } -/* Interrupt handling */ -static int ath5k_init(struct ath5k_softc *sc); -static int ath5k_stop_locked(struct ath5k_softc *sc); -static int ath5k_stop_hw(struct ath5k_softc *sc); -static irqreturn_t ath5k_intr(int irq, void *dev_id); -static void ath5k_tasklet_reset(unsigned long data); - -static void ath5k_tasklet_calibrate(unsigned long data); - -/* - * Module init/exit functions - */ -static int __init -init_ath5k_pci(void) -{ - int ret; - - ath5k_debug_init(); - - ret = pci_register_driver(&ath5k_pci_driver); - if (ret) { - printk(KERN_ERR "ath5k_pci: can't register pci driver\n"); - return ret; - } - - return 0; -} - -static void __exit -exit_ath5k_pci(void) -{ - pci_unregister_driver(&ath5k_pci_driver); - - ath5k_debug_finish(); -} - -module_init(init_ath5k_pci); -module_exit(exit_ath5k_pci); - - -/********************\ -* PCI Initialization * -\********************/ - static const char * ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val) { @@ -461,282 +271,6 @@ static const struct ath_ops ath5k_common_ops = { .write = ath5k_iowrite32, }; -static int __devinit -ath5k_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *id) -{ - void __iomem *mem; - struct ath5k_softc *sc; - struct ath_common *common; - struct ieee80211_hw *hw; - int ret; - u8 csz; - - ret = pci_enable_device(pdev); - if (ret) { - dev_err(&pdev->dev, "can't enable device\n"); - goto err; - } - - /* XXX 32-bit addressing only */ - ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); - if (ret) { - dev_err(&pdev->dev, "32-bit DMA not available\n"); - goto err_dis; - } - - /* - * Cache line size is used to size and align various - * structures used to communicate with the hardware. - */ - pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz); - if (csz == 0) { - /* - * Linux 2.4.18 (at least) writes the cache line size - * register as a 16-bit wide register which is wrong. - * We must have this setup properly for rx buffer - * DMA to work so force a reasonable value here if it - * comes up zero. - */ - csz = L1_CACHE_BYTES >> 2; - pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz); - } - /* - * The default setting of latency timer yields poor results, - * set it to the value used by other systems. It may be worth - * tweaking this setting more. - */ - pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8); - - /* Enable bus mastering */ - pci_set_master(pdev); - - /* - * Disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state. - */ - pci_write_config_byte(pdev, 0x41, 0); - - ret = pci_request_region(pdev, 0, "ath5k"); - if (ret) { - dev_err(&pdev->dev, "cannot reserve PCI memory region\n"); - goto err_dis; - } - - mem = pci_iomap(pdev, 0, 0); - if (!mem) { - dev_err(&pdev->dev, "cannot remap PCI memory region\n") ; - ret = -EIO; - goto err_reg; - } - - /* - * Allocate hw (mac80211 main struct) - * and hw->priv (driver private data) - */ - hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops); - if (hw == NULL) { - dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n"); - ret = -ENOMEM; - goto err_map; - } - - dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy)); - - /* Initialize driver private data */ - SET_IEEE80211_DEV(hw, &pdev->dev); - hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_SIGNAL_DBM; - - hw->wiphy->interface_modes = - BIT(NL80211_IFTYPE_AP) | - BIT(NL80211_IFTYPE_STATION) | - BIT(NL80211_IFTYPE_ADHOC) | - BIT(NL80211_IFTYPE_MESH_POINT); - - hw->extra_tx_headroom = 2; - hw->channel_change_time = 5000; - sc = hw->priv; - sc->hw = hw; - sc->pdev = pdev; - - ath5k_debug_init_device(sc); - - /* - * Mark the device as detached to avoid processing - * interrupts until setup is complete. - */ - __set_bit(ATH_STAT_INVALID, sc->status); - - sc->iobase = mem; /* So we can unmap it on detach */ - sc->opmode = NL80211_IFTYPE_STATION; - sc->bintval = 1000; - mutex_init(&sc->lock); - spin_lock_init(&sc->rxbuflock); - spin_lock_init(&sc->txbuflock); - spin_lock_init(&sc->block); - - /* Set private data */ - pci_set_drvdata(pdev, hw); - - /* Setup interrupt handler */ - ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc); - if (ret) { - ATH5K_ERR(sc, "request_irq failed\n"); - goto err_free; - } - - /*If we passed the test malloc a ath5k_hw struct*/ - sc->ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL); - if (!sc->ah) { - ret = -ENOMEM; - ATH5K_ERR(sc, "out of memory\n"); - goto err_irq; - } - - sc->ah->ah_sc = sc; - sc->ah->ah_iobase = sc->iobase; - common = ath5k_hw_common(sc->ah); - common->ops = &ath5k_common_ops; - common->ah = sc->ah; - common->hw = hw; - common->cachelsz = csz << 2; /* convert to bytes */ - - /* Initialize device */ - ret = ath5k_hw_attach(sc); - if (ret) { - goto err_free_ah; - } - - /* set up multi-rate retry capabilities */ - if (sc->ah->ah_version == AR5K_AR5212) { - hw->max_rates = 4; - hw->max_rate_tries = 11; - } - - /* Finish private driver data initialization */ - ret = ath5k_attach(pdev, hw); - if (ret) - goto err_ah; - - ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n", - ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev), - sc->ah->ah_mac_srev, - sc->ah->ah_phy_revision); - - if (!sc->ah->ah_single_chip) { - /* Single chip radio (!RF5111) */ - if (sc->ah->ah_radio_5ghz_revision && - !sc->ah->ah_radio_2ghz_revision) { - /* No 5GHz support -> report 2GHz radio */ - if (!test_bit(AR5K_MODE_11A, - sc->ah->ah_capabilities.cap_mode)) { - ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_5ghz_revision), - sc->ah->ah_radio_5ghz_revision); - /* No 2GHz support (5110 and some - * 5Ghz only cards) -> report 5Ghz radio */ - } else if (!test_bit(AR5K_MODE_11B, - sc->ah->ah_capabilities.cap_mode)) { - ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_5ghz_revision), - sc->ah->ah_radio_5ghz_revision); - /* Multiband radio */ - } else { - ATH5K_INFO(sc, "RF%s multiband radio found" - " (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_5ghz_revision), - sc->ah->ah_radio_5ghz_revision); - } - } - /* Multi chip radio (RF5111 - RF2111) -> - * report both 2GHz/5GHz radios */ - else if (sc->ah->ah_radio_5ghz_revision && - sc->ah->ah_radio_2ghz_revision){ - ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_5ghz_revision), - sc->ah->ah_radio_5ghz_revision); - ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_2ghz_revision), - sc->ah->ah_radio_2ghz_revision); - } - } - - - /* ready to process interrupts */ - __clear_bit(ATH_STAT_INVALID, sc->status); - - return 0; -err_ah: - ath5k_hw_detach(sc->ah); -err_irq: - free_irq(pdev->irq, sc); -err_free_ah: - kfree(sc->ah); -err_free: - ieee80211_free_hw(hw); -err_map: - pci_iounmap(pdev, mem); -err_reg: - pci_release_region(pdev, 0); -err_dis: - pci_disable_device(pdev); -err: - return ret; -} - -static void __devexit -ath5k_pci_remove(struct pci_dev *pdev) -{ - struct ieee80211_hw *hw = pci_get_drvdata(pdev); - struct ath5k_softc *sc = hw->priv; - - ath5k_debug_finish_device(sc); - ath5k_detach(pdev, hw); - ath5k_hw_detach(sc->ah); - kfree(sc->ah); - free_irq(pdev->irq, sc); - pci_iounmap(pdev, sc->iobase); - pci_release_region(pdev, 0); - pci_disable_device(pdev); - ieee80211_free_hw(hw); -} - -#ifdef CONFIG_PM_SLEEP -static int ath5k_pci_suspend(struct device *dev) -{ - struct ieee80211_hw *hw = pci_get_drvdata(to_pci_dev(dev)); - struct ath5k_softc *sc = hw->priv; - - ath5k_led_off(sc); - return 0; -} - -static int ath5k_pci_resume(struct device *dev) -{ - struct pci_dev *pdev = to_pci_dev(dev); - struct ieee80211_hw *hw = pci_get_drvdata(pdev); - struct ath5k_softc *sc = hw->priv; - - /* - * Suspend/Resume resets the PCI configuration space, so we have to - * re-disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state - */ - pci_write_config_byte(pdev, 0x41, 0); - - ath5k_led_enable(sc); - return 0; -} -#endif /* CONFIG_PM_SLEEP */ - - /***********************\ * Driver Initialization * \***********************/ @@ -750,165 +284,6 @@ static int ath5k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *re return ath_reg_notifier_apply(wiphy, request, regulatory); } -static int -ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) -{ - struct ath5k_softc *sc = hw->priv; - struct ath5k_hw *ah = sc->ah; - struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah); - u8 mac[ETH_ALEN] = {}; - int ret; - - ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device); - - /* - * Check if the MAC has multi-rate retry support. - * We do this by trying to setup a fake extended - * descriptor. MAC's that don't have support will - * return false w/o doing anything. MAC's that do - * support it will return true w/o doing anything. - */ - ret = ah->ah_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0); - if (ret < 0) - goto err; - if (ret > 0) - __set_bit(ATH_STAT_MRRETRY, sc->status); - - /* - * Collect the channel list. The 802.11 layer - * is resposible for filtering this list based - * on settings like the phy mode and regulatory - * domain restrictions. - */ - ret = ath5k_setup_bands(hw); - if (ret) { - ATH5K_ERR(sc, "can't get channels\n"); - goto err; - } - - /* NB: setup here so ath5k_rate_update is happy */ - if (test_bit(AR5K_MODE_11A, ah->ah_modes)) - ath5k_setcurmode(sc, AR5K_MODE_11A); - else - ath5k_setcurmode(sc, AR5K_MODE_11B); - - /* - * Allocate tx+rx descriptors and populate the lists. - */ - ret = ath5k_desc_alloc(sc, pdev); - if (ret) { - ATH5K_ERR(sc, "can't allocate descriptors\n"); - goto err; - } - - /* - * Allocate hardware transmit queues: one queue for - * beacon frames and one data queue for each QoS - * priority. Note that hw functions handle reseting - * these queues at the needed time. - */ - ret = ath5k_beaconq_setup(ah); - if (ret < 0) { - ATH5K_ERR(sc, "can't setup a beacon xmit queue\n"); - goto err_desc; - } - sc->bhalq = ret; - sc->cabq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_CAB, 0); - if (IS_ERR(sc->cabq)) { - ATH5K_ERR(sc, "can't setup cab queue\n"); - ret = PTR_ERR(sc->cabq); - goto err_bhal; - } - - sc->txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK); - if (IS_ERR(sc->txq)) { - ATH5K_ERR(sc, "can't setup xmit queue\n"); - ret = PTR_ERR(sc->txq); - goto err_queues; - } - - tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc); - tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc); - tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc); - tasklet_init(&sc->calib, ath5k_tasklet_calibrate, (unsigned long)sc); - tasklet_init(&sc->beacontq, ath5k_tasklet_beacon, (unsigned long)sc); - tasklet_init(&sc->ani_tasklet, ath5k_tasklet_ani, (unsigned long)sc); - - ret = ath5k_eeprom_read_mac(ah, mac); - if (ret) { - ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n", - sc->pdev->device); - goto err_queues; - } - - SET_IEEE80211_PERM_ADDR(hw, mac); - /* All MAC address bits matter for ACKs */ - memcpy(sc->bssidmask, ath_bcast_mac, ETH_ALEN); - ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask); - - regulatory->current_rd = ah->ah_capabilities.cap_eeprom.ee_regdomain; - ret = ath_regd_init(regulatory, hw->wiphy, ath5k_reg_notifier); - if (ret) { - ATH5K_ERR(sc, "can't initialize regulatory system\n"); - goto err_queues; - } - - ret = ieee80211_register_hw(hw); - if (ret) { - ATH5K_ERR(sc, "can't register ieee80211 hw\n"); - goto err_queues; - } - - if (!ath_is_world_regd(regulatory)) - regulatory_hint(hw->wiphy, regulatory->alpha2); - - ath5k_init_leds(sc); - - return 0; -err_queues: - ath5k_txq_release(sc); -err_bhal: - ath5k_hw_release_tx_queue(ah, sc->bhalq); -err_desc: - ath5k_desc_free(sc, pdev); -err: - return ret; -} - -static void -ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw) -{ - struct ath5k_softc *sc = hw->priv; - - /* - * NB: the order of these is important: - * o call the 802.11 layer before detaching ath5k_hw to - * insure callbacks into the driver to delete global - * key cache entries can be handled - * o reclaim the tx queue data structures after calling - * the 802.11 layer as we'll get called back to reclaim - * node state and potentially want to use them - * o to cleanup the tx queues the hal is called, so detach - * it last - * XXX: ??? detach ath5k_hw ??? - * Other than that, it's straightforward... - */ - ieee80211_unregister_hw(hw); - ath5k_desc_free(sc, pdev); - ath5k_txq_release(sc); - ath5k_hw_release_tx_queue(sc->ah, sc->bhalq); - ath5k_unregister_leds(sc); - - /* - * NB: can't reclaim these until after ieee80211_ifdetach - * returns because we'll get called back to reclaim node - * state and potentially want to use them. - */ -} - - - - /********************\ * Channel/mode setup * \********************/ @@ -1111,8 +486,9 @@ ath5k_setup_bands(struct ieee80211_hw *hw) static int ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) { - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "(%u MHz) -> (%u MHz)\n", - sc->curchan->center_freq, chan->center_freq); + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, + "channel set, resetting (%u -> %u MHz)\n", + sc->curchan->center_freq, chan->center_freq); /* * To switch channels clear any pending DMA operations; @@ -1135,8 +511,101 @@ ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode) } } +struct ath_vif_iter_data { + const u8 *hw_macaddr; + u8 mask[ETH_ALEN]; + u8 active_mac[ETH_ALEN]; /* first active MAC */ + bool need_set_hw_addr; + bool found_active; + bool any_assoc; + enum nl80211_iftype opmode; +}; + +static void ath_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif) +{ + struct ath_vif_iter_data *iter_data = data; + int i; + struct ath5k_vif *avf = (void *)vif->drv_priv; + + if (iter_data->hw_macaddr) + for (i = 0; i < ETH_ALEN; i++) + iter_data->mask[i] &= + ~(iter_data->hw_macaddr[i] ^ mac[i]); + + if (!iter_data->found_active) { + iter_data->found_active = true; + memcpy(iter_data->active_mac, mac, ETH_ALEN); + } + + if (iter_data->need_set_hw_addr && iter_data->hw_macaddr) + if (compare_ether_addr(iter_data->hw_macaddr, mac) == 0) + iter_data->need_set_hw_addr = false; + + if (!iter_data->any_assoc) { + if (avf->assoc) + iter_data->any_assoc = true; + } + + /* Calculate combined mode - when APs are active, operate in AP mode. + * Otherwise use the mode of the new interface. This can currently + * only deal with combinations of APs and STAs. Only one ad-hoc + * interfaces is allowed above. + */ + if (avf->opmode == NL80211_IFTYPE_AP) + iter_data->opmode = NL80211_IFTYPE_AP; + else + if (iter_data->opmode == NL80211_IFTYPE_UNSPECIFIED) + iter_data->opmode = avf->opmode; +} + +static void ath_do_set_opmode(struct ath5k_softc *sc) +{ + struct ath5k_hw *ah = sc->ah; + ath5k_hw_set_opmode(ah, sc->opmode); + ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "mode setup opmode %d (%s)\n", + sc->opmode, ath_opmode_to_string(sc->opmode)); +} + +void ath5k_update_bssid_mask_and_opmode(struct ath5k_softc *sc, + struct ieee80211_vif *vif) +{ + struct ath_common *common = ath5k_hw_common(sc->ah); + struct ath_vif_iter_data iter_data; + + /* + * Use the hardware MAC address as reference, the hardware uses it + * together with the BSSID mask when matching addresses. + */ + iter_data.hw_macaddr = common->macaddr; + memset(&iter_data.mask, 0xff, ETH_ALEN); + iter_data.found_active = false; + iter_data.need_set_hw_addr = true; + iter_data.opmode = NL80211_IFTYPE_UNSPECIFIED; + + if (vif) + ath_vif_iter(&iter_data, vif->addr, vif); + + /* Get list of all active MAC addresses */ + ieee80211_iterate_active_interfaces_atomic(sc->hw, ath_vif_iter, + &iter_data); + memcpy(sc->bssidmask, iter_data.mask, ETH_ALEN); + + sc->opmode = iter_data.opmode; + if (sc->opmode == NL80211_IFTYPE_UNSPECIFIED) + /* Nothing active, default to station mode */ + sc->opmode = NL80211_IFTYPE_STATION; + + ath_do_set_opmode(sc); + + if (iter_data.need_set_hw_addr && iter_data.found_active) + ath5k_hw_set_lladdr(sc->ah, iter_data.active_mac); + + if (ath5k_hw_hasbssidmask(sc->ah)) + ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask); +} + static void -ath5k_mode_setup(struct ath5k_softc *sc) +ath5k_mode_setup(struct ath5k_softc *sc, struct ieee80211_vif *vif) { struct ath5k_hw *ah = sc->ah; u32 rfilt; @@ -1144,15 +613,9 @@ ath5k_mode_setup(struct ath5k_softc *sc) /* configure rx filter */ rfilt = sc->filter_flags; ath5k_hw_set_rx_filter(ah, rfilt); - - if (ath5k_hw_hasbssidmask(ah)) - ath5k_hw_set_bssid_mask(ah, sc->bssidmask); - - /* configure operational mode */ - ath5k_hw_set_opmode(ah, sc->opmode); - - ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "mode setup opmode %d\n", sc->opmode); ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt); + + ath5k_update_bssid_mask_and_opmode(sc, vif); } static inline int @@ -1228,21 +691,23 @@ ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) * not get overrun under high load (as can happen with a * 5212 when ANI processing enables PHY error frames). * - * To insure the last descriptor is self-linked we create + * To ensure the last descriptor is self-linked we create * each descriptor as self-linked and add it to the end. As * each additional descriptor is added the previous self-linked - * entry is ``fixed'' naturally. This should be safe even + * entry is "fixed" naturally. This should be safe even * if DMA is happening. When processing RX interrupts we * never remove/process the last, self-linked, entry on the - * descriptor list. This insures the hardware always has + * descriptor list. This ensures the hardware always has * someplace to write a new frame. */ ds = bf->desc; ds->ds_link = bf->daddr; /* link to self */ ds->ds_data = bf->skbaddr; - ret = ah->ah_setup_rx_desc(ah, ds, ah->common.rx_bufsize, 0); - if (ret) + ret = ath5k_hw_setup_rx_desc(ah, ds, ah->common.rx_bufsize, 0); + if (ret) { + ATH5K_ERR(sc, "%s: could not setup RX desc\n", __func__); return ret; + } if (sc->rxlink != NULL) *sc->rxlink = bf->daddr; @@ -1297,6 +762,10 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, PCI_DMA_TODEVICE); rate = ieee80211_get_tx_rate(sc->hw, info); + if (!rate) { + ret = -EINVAL; + goto err_unmap; + } if (info->flags & IEEE80211_TX_CTL_NO_ACK) flags |= AR5K_TXDESC_NOACK; @@ -1318,13 +787,13 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, flags |= AR5K_TXDESC_RTSENA; cts_rate = ieee80211_get_rts_cts_rate(sc->hw, info)->hw_value; duration = le16_to_cpu(ieee80211_rts_duration(sc->hw, - sc->vif, pktlen, info)); + info->control.vif, pktlen, info)); } if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { flags |= AR5K_TXDESC_CTSENA; cts_rate = ieee80211_get_rts_cts_rate(sc->hw, info)->hw_value; duration = le16_to_cpu(ieee80211_ctstoself_duration(sc->hw, - sc->vif, pktlen, info)); + info->control.vif, pktlen, info)); } ret = ah->ah_setup_tx_desc(ah, ds, pktlen, ieee80211_get_hdrlen_from_skb(skb), padsize, @@ -1347,7 +816,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, mrr_tries[i] = info->control.rates[i + 1].count; } - ah->ah_setup_mrr_tx_desc(ah, ds, + ath5k_hw_setup_mrr_tx_desc(ah, ds, mrr_rate[0], mrr_tries[0], mrr_rate[1], mrr_tries[1], mrr_rate[2], mrr_tries[2]); @@ -1357,6 +826,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, spin_lock_bh(&txq->lock); list_add_tail(&bf->list, &txq->q); + txq->txq_len++; if (txq->link == NULL) /* is this first packet? */ ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr); else /* no, so only link it */ @@ -1425,10 +895,13 @@ ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev) list_add_tail(&bf->list, &sc->txbuf); } - /* beacon buffer */ - bf->desc = ds; - bf->daddr = da; - sc->bbuf = bf; + /* beacon buffers */ + INIT_LIST_HEAD(&sc->bcbuf); + for (i = 0; i < ATH_BCBUF; i++, bf++, ds++, da += sizeof(*ds)) { + bf->desc = ds; + bf->daddr = da; + list_add_tail(&bf->list, &sc->bcbuf); + } return 0; err_free: @@ -1443,23 +916,23 @@ ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev) { struct ath5k_buf *bf; - ath5k_txbuf_free(sc, sc->bbuf); list_for_each_entry(bf, &sc->txbuf, list) - ath5k_txbuf_free(sc, bf); + ath5k_txbuf_free_skb(sc, bf); list_for_each_entry(bf, &sc->rxbuf, list) - ath5k_rxbuf_free(sc, bf); + ath5k_rxbuf_free_skb(sc, bf); + list_for_each_entry(bf, &sc->bcbuf, list) + ath5k_txbuf_free_skb(sc, bf); /* Free memory associated with all descriptors */ pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr); + sc->desc = NULL; + sc->desc_daddr = 0; kfree(sc->bufptr); sc->bufptr = NULL; } - - - /**************\ * Queues setup * \**************/ @@ -1472,16 +945,18 @@ ath5k_txq_setup(struct ath5k_softc *sc, struct ath5k_txq *txq; struct ath5k_txq_info qi = { .tqi_subtype = subtype, - .tqi_aifs = AR5K_TXQ_USEDEFAULT, - .tqi_cw_min = AR5K_TXQ_USEDEFAULT, - .tqi_cw_max = AR5K_TXQ_USEDEFAULT + /* XXX: default values not correct for B and XR channels, + * but who cares? */ + .tqi_aifs = AR5K_TUNE_AIFS, + .tqi_cw_min = AR5K_TUNE_CWMIN, + .tqi_cw_max = AR5K_TUNE_CWMAX }; int qnum; /* * Enable interrupts only for EOL and DESC conditions. * We mark tx descriptors to receive a DESC interrupt - * when a tx queue gets deep; otherwise waiting for the + * when a tx queue gets deep; otherwise we wait for the * EOL to reap descriptors. Note that this is done to * reduce interrupt load and this only defers reaping * descriptors, never transmitting frames. Aside from @@ -1513,6 +988,9 @@ ath5k_txq_setup(struct ath5k_softc *sc, INIT_LIST_HEAD(&txq->q); spin_lock_init(&txq->lock); txq->setup = true; + txq->txq_len = 0; + txq->txq_poll_mark = false; + txq->txq_stuck = 0; } return &sc->txqs[qnum]; } @@ -1521,9 +999,11 @@ static int ath5k_beaconq_setup(struct ath5k_hw *ah) { struct ath5k_txq_info qi = { - .tqi_aifs = AR5K_TXQ_USEDEFAULT, - .tqi_cw_min = AR5K_TXQ_USEDEFAULT, - .tqi_cw_max = AR5K_TXQ_USEDEFAULT, + /* XXX: default values not correct for B and XR channels, + * but who cares? */ + .tqi_aifs = AR5K_TUNE_AIFS, + .tqi_cw_min = AR5K_TUNE_CWMIN, + .tqi_cw_max = AR5K_TUNE_CWMAX, /* NB: for dynamic turbo, don't enable any other interrupts */ .tqi_flags = AR5K_TXQ_FLAG_TXDESCINT_ENABLE }; @@ -1557,7 +1037,7 @@ ath5k_beaconq_config(struct ath5k_softc *sc) */ qi.tqi_aifs = 0; qi.tqi_cw_min = 0; - qi.tqi_cw_max = 2 * ah->ah_cw_min; + qi.tqi_cw_max = 2 * AR5K_TUNE_CWMIN; } ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, @@ -1602,14 +1082,16 @@ ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq) list_for_each_entry_safe(bf, bf0, &txq->q, list) { ath5k_debug_printtxbuf(sc, bf); - ath5k_txbuf_free(sc, bf); + ath5k_txbuf_free_skb(sc, bf); spin_lock_bh(&sc->txbuflock); list_move_tail(&bf->list, &sc->txbuf); sc->txbuf_len++; + txq->txq_len--; spin_unlock_bh(&sc->txbuflock); } txq->link = NULL; + txq->txq_poll_mark = false; spin_unlock_bh(&txq->lock); } @@ -1659,8 +1141,6 @@ ath5k_txq_release(struct ath5k_softc *sc) } - - /*************\ * RX Handling * \*************/ @@ -1676,7 +1156,7 @@ ath5k_rx_start(struct ath5k_softc *sc) struct ath5k_buf *bf; int ret; - common->rx_bufsize = roundup(IEEE80211_MAX_LEN, common->cachelsz); + common->rx_bufsize = roundup(IEEE80211_MAX_FRAME_LEN, common->cachelsz); ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rx_bufsize %u\n", common->cachelsz, common->rx_bufsize); @@ -1695,7 +1175,7 @@ ath5k_rx_start(struct ath5k_softc *sc) spin_unlock_bh(&sc->rxbuflock); ath5k_hw_start_rx_dma(ah); /* enable recv descriptors */ - ath5k_mode_setup(sc); /* set filters, etc. */ + ath5k_mode_setup(sc, NULL); /* set filters, etc. */ ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */ return 0; @@ -1716,13 +1196,11 @@ ath5k_rx_stop(struct ath5k_softc *sc) ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */ ath5k_debug_printrxbuffs(sc, ah); - - sc->rxlink = NULL; /* just in case */ } static unsigned int -ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds, - struct sk_buff *skb, struct ath5k_rx_status *rs) +ath5k_rx_decrypted(struct ath5k_softc *sc, struct sk_buff *skb, + struct ath5k_rx_status *rs) { struct ath5k_hw *ah = sc->ah; struct ath_common *common = ath5k_hw_common(ah); @@ -1805,6 +1283,15 @@ ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb, */ if (hw_tu >= sc->nexttbtt) ath5k_beacon_update_timers(sc, bc_tstamp); + + /* Check if the beacon timers are still correct, because a TSF + * update might have created a window between them - for a + * longer description see the comment of this function: */ + if (!ath5k_hw_check_beacon_timers(sc->ah, sc->bintval)) { + ath5k_beacon_update_timers(sc, bc_tstamp); + ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, + "fixed beacon timers after beacon receive\n"); + } } } @@ -1828,7 +1315,7 @@ ath5k_update_beacon_rssi(struct ath5k_softc *sc, struct sk_buff *skb, int rssi) } /* - * Compute padding position. skb must contains an IEEE 802.11 frame + * Compute padding position. skb must contain an IEEE 802.11 frame */ static int ath5k_common_padpos(struct sk_buff *skb) { @@ -1847,10 +1334,9 @@ static int ath5k_common_padpos(struct sk_buff *skb) } /* - * This function expects a 802.11 frame and returns the number of - * bytes added, or -1 if we don't have enought header room. + * This function expects an 802.11 frame and returns the number of + * bytes added, or -1 if we don't have enough header room. */ - static int ath5k_add_padding(struct sk_buff *skb) { int padpos = ath5k_common_padpos(skb); @@ -1870,10 +1356,18 @@ static int ath5k_add_padding(struct sk_buff *skb) } /* - * This function expects a 802.11 frame and returns the number of - * bytes removed + * The MAC header is padded to have 32-bit boundary if the + * packet payload is non-zero. The general calculation for + * padsize would take into account odd header lengths: + * padsize = 4 - (hdrlen & 3); however, since only + * even-length headers are used, padding can only be 0 or 2 + * bytes and we can optimize this a bit. We must not try to + * remove padding from short control frames that do not have a + * payload. + * + * This function expects an 802.11 frame and returns the number of + * bytes removed. */ - static int ath5k_remove_padding(struct sk_buff *skb) { int padpos = ath5k_common_padpos(skb); @@ -1889,9 +1383,130 @@ static int ath5k_remove_padding(struct sk_buff *skb) } static void -ath5k_tasklet_rx(unsigned long data) +ath5k_receive_frame(struct ath5k_softc *sc, struct sk_buff *skb, + struct ath5k_rx_status *rs) { struct ieee80211_rx_status *rxs; + + ath5k_remove_padding(skb); + + rxs = IEEE80211_SKB_RXCB(skb); + + rxs->flag = 0; + if (unlikely(rs->rs_status & AR5K_RXERR_MIC)) + rxs->flag |= RX_FLAG_MMIC_ERROR; + + /* + * always extend the mac timestamp, since this information is + * also needed for proper IBSS merging. + * + * XXX: it might be too late to do it here, since rs_tstamp is + * 15bit only. that means TSF extension has to be done within + * 32768usec (about 32ms). it might be necessary to move this to + * the interrupt handler, like it is done in madwifi. + * + * Unfortunately we don't know when the hardware takes the rx + * timestamp (beginning of phy frame, data frame, end of rx?). + * The only thing we know is that it is hardware specific... + * On AR5213 it seems the rx timestamp is at the end of the + * frame, but i'm not sure. + * + * NOTE: mac80211 defines mactime at the beginning of the first + * data symbol. Since we don't have any time references it's + * impossible to comply to that. This affects IBSS merge only + * right now, so it's not too bad... + */ + rxs->mactime = ath5k_extend_tsf(sc->ah, rs->rs_tstamp); + rxs->flag |= RX_FLAG_TSFT; + + rxs->freq = sc->curchan->center_freq; + rxs->band = sc->curband->band; + + rxs->signal = sc->ah->ah_noise_floor + rs->rs_rssi; + + rxs->antenna = rs->rs_antenna; + + if (rs->rs_antenna > 0 && rs->rs_antenna < 5) + sc->stats.antenna_rx[rs->rs_antenna]++; + else + sc->stats.antenna_rx[0]++; /* invalid */ + + rxs->rate_idx = ath5k_hw_to_driver_rix(sc, rs->rs_rate); + rxs->flag |= ath5k_rx_decrypted(sc, skb, rs); + + if (rxs->rate_idx >= 0 && rs->rs_rate == + sc->curband->bitrates[rxs->rate_idx].hw_value_short) + rxs->flag |= RX_FLAG_SHORTPRE; + + ath5k_debug_dump_skb(sc, skb, "RX ", 0); + + ath5k_update_beacon_rssi(sc, skb, rs->rs_rssi); + + /* check beacons in IBSS mode */ + if (sc->opmode == NL80211_IFTYPE_ADHOC) + ath5k_check_ibss_tsf(sc, skb, rxs); + + ieee80211_rx(sc->hw, skb); +} + +/** ath5k_frame_receive_ok() - Do we want to receive this frame or not? + * + * Check if we want to further process this frame or not. Also update + * statistics. Return true if we want this frame, false if not. + */ +static bool +ath5k_receive_frame_ok(struct ath5k_softc *sc, struct ath5k_rx_status *rs) +{ + sc->stats.rx_all_count++; + sc->stats.rx_bytes_count += rs->rs_datalen; + + if (unlikely(rs->rs_status)) { + if (rs->rs_status & AR5K_RXERR_CRC) + sc->stats.rxerr_crc++; + if (rs->rs_status & AR5K_RXERR_FIFO) + sc->stats.rxerr_fifo++; + if (rs->rs_status & AR5K_RXERR_PHY) { + sc->stats.rxerr_phy++; + if (rs->rs_phyerr > 0 && rs->rs_phyerr < 32) + sc->stats.rxerr_phy_code[rs->rs_phyerr]++; + return false; + } + if (rs->rs_status & AR5K_RXERR_DECRYPT) { + /* + * Decrypt error. If the error occurred + * because there was no hardware key, then + * let the frame through so the upper layers + * can process it. This is necessary for 5210 + * parts which have no way to setup a ``clear'' + * key cache entry. + * + * XXX do key cache faulting + */ + sc->stats.rxerr_decrypt++; + if (rs->rs_keyix == AR5K_RXKEYIX_INVALID && + !(rs->rs_status & AR5K_RXERR_CRC)) + return true; + } + if (rs->rs_status & AR5K_RXERR_MIC) { + sc->stats.rxerr_mic++; + return true; + } + + /* reject any frames with non-crypto errors */ + if (rs->rs_status & ~(AR5K_RXERR_DECRYPT)) + return false; + } + + if (unlikely(rs->rs_more)) { + sc->stats.rxerr_jumbo++; + return false; + } + return true; +} + +static void +ath5k_tasklet_rx(unsigned long data) +{ struct ath5k_rx_status rs = {}; struct sk_buff *skb, *next_skb; dma_addr_t next_skb_addr; @@ -1901,7 +1516,6 @@ ath5k_tasklet_rx(unsigned long data) struct ath5k_buf *bf; struct ath5k_desc *ds; int ret; - int rx_flag; spin_lock(&sc->rxbuflock); if (list_empty(&sc->rxbuf)) { @@ -1909,8 +1523,6 @@ ath5k_tasklet_rx(unsigned long data) goto unlock; } do { - rx_flag = 0; - bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list); BUG_ON(bf->skb == NULL); skb = bf->skb; @@ -1926,150 +1538,153 @@ ath5k_tasklet_rx(unsigned long data) else if (unlikely(ret)) { ATH5K_ERR(sc, "error in processing rx descriptor\n"); sc->stats.rxerr_proc++; - spin_unlock(&sc->rxbuflock); - return; + break; } - sc->stats.rx_all_count++; - - if (unlikely(rs.rs_status)) { - if (rs.rs_status & AR5K_RXERR_CRC) - sc->stats.rxerr_crc++; - if (rs.rs_status & AR5K_RXERR_FIFO) - sc->stats.rxerr_fifo++; - if (rs.rs_status & AR5K_RXERR_PHY) { - sc->stats.rxerr_phy++; - if (rs.rs_phyerr > 0 && rs.rs_phyerr < 32) - sc->stats.rxerr_phy_code[rs.rs_phyerr]++; - goto next; - } - if (rs.rs_status & AR5K_RXERR_DECRYPT) { - /* - * Decrypt error. If the error occurred - * because there was no hardware key, then - * let the frame through so the upper layers - * can process it. This is necessary for 5210 - * parts which have no way to setup a ``clear'' - * key cache entry. - * - * XXX do key cache faulting - */ - sc->stats.rxerr_decrypt++; - if (rs.rs_keyix == AR5K_RXKEYIX_INVALID && - !(rs.rs_status & AR5K_RXERR_CRC)) - goto accept; - } - if (rs.rs_status & AR5K_RXERR_MIC) { - rx_flag |= RX_FLAG_MMIC_ERROR; - sc->stats.rxerr_mic++; - goto accept; - } + if (ath5k_receive_frame_ok(sc, &rs)) { + next_skb = ath5k_rx_skb_alloc(sc, &next_skb_addr); - /* let crypto-error packets fall through in MNTR */ - if ((rs.rs_status & - ~(AR5K_RXERR_DECRYPT|AR5K_RXERR_MIC)) || - sc->opmode != NL80211_IFTYPE_MONITOR) + /* + * If we can't replace bf->skb with a new skb under + * memory pressure, just skip this packet + */ + if (!next_skb) goto next; - } - if (unlikely(rs.rs_more)) { - sc->stats.rxerr_jumbo++; - goto next; + pci_unmap_single(sc->pdev, bf->skbaddr, + common->rx_bufsize, + PCI_DMA_FROMDEVICE); - } -accept: - next_skb = ath5k_rx_skb_alloc(sc, &next_skb_addr); + skb_put(skb, rs.rs_datalen); - /* - * If we can't replace bf->skb with a new skb under memory - * pressure, just skip this packet - */ - if (!next_skb) - goto next; + ath5k_receive_frame(sc, skb, &rs); - pci_unmap_single(sc->pdev, bf->skbaddr, common->rx_bufsize, - PCI_DMA_FROMDEVICE); - skb_put(skb, rs.rs_datalen); + bf->skb = next_skb; + bf->skbaddr = next_skb_addr; + } +next: + list_move_tail(&bf->list, &sc->rxbuf); + } while (ath5k_rxbuf_setup(sc, bf) == 0); +unlock: + spin_unlock(&sc->rxbuflock); +} - /* The MAC header is padded to have 32-bit boundary if the - * packet payload is non-zero. The general calculation for - * padsize would take into account odd header lengths: - * padsize = (4 - hdrlen % 4) % 4; However, since only - * even-length headers are used, padding can only be 0 or 2 - * bytes and we can optimize this a bit. In addition, we must - * not try to remove padding from short control frames that do - * not have payload. */ - ath5k_remove_padding(skb); - rxs = IEEE80211_SKB_RXCB(skb); +/*************\ +* TX Handling * +\*************/ - /* - * always extend the mac timestamp, since this information is - * also needed for proper IBSS merging. - * - * XXX: it might be too late to do it here, since rs_tstamp is - * 15bit only. that means TSF extension has to be done within - * 32768usec (about 32ms). it might be necessary to move this to - * the interrupt handler, like it is done in madwifi. - * - * Unfortunately we don't know when the hardware takes the rx - * timestamp (beginning of phy frame, data frame, end of rx?). - * The only thing we know is that it is hardware specific... - * On AR5213 it seems the rx timestamp is at the end of the - * frame, but i'm not sure. - * - * NOTE: mac80211 defines mactime at the beginning of the first - * data symbol. Since we don't have any time references it's - * impossible to comply to that. This affects IBSS merge only - * right now, so it's not too bad... - */ - rxs->mactime = ath5k_extend_tsf(sc->ah, rs.rs_tstamp); - rxs->flag = rx_flag | RX_FLAG_TSFT; +static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ath5k_txq *txq) +{ + struct ath5k_softc *sc = hw->priv; + struct ath5k_buf *bf; + unsigned long flags; + int padsize; - rxs->freq = sc->curchan->center_freq; - rxs->band = sc->curband->band; + ath5k_debug_dump_skb(sc, skb, "TX ", 1); - rxs->signal = sc->ah->ah_noise_floor + rs.rs_rssi; + /* + * The hardware expects the header padded to 4 byte boundaries. + * If this is not the case, we add the padding after the header. + */ + padsize = ath5k_add_padding(skb); + if (padsize < 0) { + ATH5K_ERR(sc, "tx hdrlen not %%4: not enough" + " headroom to pad"); + goto drop_packet; + } - rxs->antenna = rs.rs_antenna; + if (txq->txq_len >= ATH5K_TXQ_LEN_MAX) + ieee80211_stop_queue(hw, txq->qnum); - if (rs.rs_antenna > 0 && rs.rs_antenna < 5) - sc->stats.antenna_rx[rs.rs_antenna]++; - else - sc->stats.antenna_rx[0]++; /* invalid */ + spin_lock_irqsave(&sc->txbuflock, flags); + if (list_empty(&sc->txbuf)) { + ATH5K_ERR(sc, "no further txbuf available, dropping packet\n"); + spin_unlock_irqrestore(&sc->txbuflock, flags); + ieee80211_stop_queues(hw); + goto drop_packet; + } + bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list); + list_del(&bf->list); + sc->txbuf_len--; + if (list_empty(&sc->txbuf)) + ieee80211_stop_queues(hw); + spin_unlock_irqrestore(&sc->txbuflock, flags); - rxs->rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate); - rxs->flag |= ath5k_rx_decrypted(sc, ds, skb, &rs); + bf->skb = skb; - if (rxs->rate_idx >= 0 && rs.rs_rate == - sc->curband->bitrates[rxs->rate_idx].hw_value_short) - rxs->flag |= RX_FLAG_SHORTPRE; + if (ath5k_txbuf_setup(sc, bf, txq, padsize)) { + bf->skb = NULL; + spin_lock_irqsave(&sc->txbuflock, flags); + list_add_tail(&bf->list, &sc->txbuf); + sc->txbuf_len++; + spin_unlock_irqrestore(&sc->txbuflock, flags); + goto drop_packet; + } + return NETDEV_TX_OK; - ath5k_debug_dump_skb(sc, skb, "RX ", 0); +drop_packet: + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; +} - ath5k_update_beacon_rssi(sc, skb, rs.rs_rssi); +static void +ath5k_tx_frame_completed(struct ath5k_softc *sc, struct sk_buff *skb, + struct ath5k_tx_status *ts) +{ + struct ieee80211_tx_info *info; + int i; - /* check beacons in IBSS mode */ - if (sc->opmode == NL80211_IFTYPE_ADHOC) - ath5k_check_ibss_tsf(sc, skb, rxs); + sc->stats.tx_all_count++; + sc->stats.tx_bytes_count += skb->len; + info = IEEE80211_SKB_CB(skb); - ieee80211_rx(sc->hw, skb); + ieee80211_tx_info_clear_status(info); + for (i = 0; i < 4; i++) { + struct ieee80211_tx_rate *r = + &info->status.rates[i]; - bf->skb = next_skb; - bf->skbaddr = next_skb_addr; -next: - list_move_tail(&bf->list, &sc->rxbuf); - } while (ath5k_rxbuf_setup(sc, bf) == 0); -unlock: - spin_unlock(&sc->rxbuflock); -} + if (ts->ts_rate[i]) { + r->idx = ath5k_hw_to_driver_rix(sc, ts->ts_rate[i]); + r->count = ts->ts_retry[i]; + } else { + r->idx = -1; + r->count = 0; + } + } + /* count the successful attempt as well */ + info->status.rates[ts->ts_final_idx].count++; + if (unlikely(ts->ts_status)) { + sc->stats.ack_fail++; + if (ts->ts_status & AR5K_TXERR_FILT) { + info->flags |= IEEE80211_TX_STAT_TX_FILTERED; + sc->stats.txerr_filt++; + } + if (ts->ts_status & AR5K_TXERR_XRETRY) + sc->stats.txerr_retry++; + if (ts->ts_status & AR5K_TXERR_FIFO) + sc->stats.txerr_fifo++; + } else { + info->flags |= IEEE80211_TX_STAT_ACK; + info->status.ack_signal = ts->ts_rssi; + } + /* + * Remove MAC header padding before giving the frame + * back to mac80211. + */ + ath5k_remove_padding(skb); -/*************\ -* TX Handling * -\*************/ + if (ts->ts_antenna > 0 && ts->ts_antenna < 5) + sc->stats.antenna_tx[ts->ts_antenna]++; + else + sc->stats.antenna_tx[0]++; /* invalid */ + + ieee80211_tx_status(sc->hw, skb); +} static void ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) @@ -2078,96 +1693,51 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) struct ath5k_buf *bf, *bf0; struct ath5k_desc *ds; struct sk_buff *skb; - struct ieee80211_tx_info *info; - int i, ret; + int ret; spin_lock(&txq->lock); list_for_each_entry_safe(bf, bf0, &txq->q, list) { - ds = bf->desc; - /* - * It's possible that the hardware can say the buffer is - * completed when it hasn't yet loaded the ds_link from - * host memory and moved on. If there are more TX - * descriptors in the queue, wait for TXDP to change - * before processing this one. - */ - if (ath5k_hw_get_txdp(sc->ah, txq->qnum) == bf->daddr && - !list_is_last(&bf->list, &txq->q)) - break; + txq->txq_poll_mark = false; - ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts); - if (unlikely(ret == -EINPROGRESS)) - break; - else if (unlikely(ret)) { - ATH5K_ERR(sc, "error %d while processing queue %u\n", - ret, txq->qnum); - break; - } - - sc->stats.tx_all_count++; - skb = bf->skb; - info = IEEE80211_SKB_CB(skb); - bf->skb = NULL; + /* skb might already have been processed last time. */ + if (bf->skb != NULL) { + ds = bf->desc; - pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, - PCI_DMA_TODEVICE); - - ieee80211_tx_info_clear_status(info); - for (i = 0; i < 4; i++) { - struct ieee80211_tx_rate *r = - &info->status.rates[i]; - - if (ts.ts_rate[i]) { - r->idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]); - r->count = ts.ts_retry[i]; - } else { - r->idx = -1; - r->count = 0; + ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts); + if (unlikely(ret == -EINPROGRESS)) + break; + else if (unlikely(ret)) { + ATH5K_ERR(sc, + "error %d while processing " + "queue %u\n", ret, txq->qnum); + break; } - } - - /* count the successful attempt as well */ - info->status.rates[ts.ts_final_idx].count++; - if (unlikely(ts.ts_status)) { - sc->stats.ack_fail++; - if (ts.ts_status & AR5K_TXERR_FILT) { - info->flags |= IEEE80211_TX_STAT_TX_FILTERED; - sc->stats.txerr_filt++; - } - if (ts.ts_status & AR5K_TXERR_XRETRY) - sc->stats.txerr_retry++; - if (ts.ts_status & AR5K_TXERR_FIFO) - sc->stats.txerr_fifo++; - } else { - info->flags |= IEEE80211_TX_STAT_ACK; - info->status.ack_signal = ts.ts_rssi; + skb = bf->skb; + bf->skb = NULL; + pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, + PCI_DMA_TODEVICE); + ath5k_tx_frame_completed(sc, skb, &ts); } /* - * Remove MAC header padding before giving the frame - * back to mac80211. + * It's possible that the hardware can say the buffer is + * completed when it hasn't yet loaded the ds_link from + * host memory and moved on. + * Always keep the last descriptor to avoid HW races... */ - ath5k_remove_padding(skb); - - if (ts.ts_antenna > 0 && ts.ts_antenna < 5) - sc->stats.antenna_tx[ts.ts_antenna]++; - else - sc->stats.antenna_tx[0]++; /* invalid */ - - ieee80211_tx_status(sc->hw, skb); - - spin_lock(&sc->txbuflock); - list_move_tail(&bf->list, &sc->txbuf); - sc->txbuf_len++; - spin_unlock(&sc->txbuflock); + if (ath5k_hw_get_txdp(sc->ah, txq->qnum) != bf->daddr) { + spin_lock(&sc->txbuflock); + list_move_tail(&bf->list, &sc->txbuf); + sc->txbuf_len++; + txq->txq_len--; + spin_unlock(&sc->txbuflock); + } } - if (likely(list_empty(&txq->q))) - txq->link = NULL; spin_unlock(&txq->lock); - if (sc->txbuf_len > ATH_TXBUF / 5) - ieee80211_wake_queues(sc->hw); + if (txq->txq_len < ATH5K_TXQ_LEN_LOW && txq->qnum < 4) + ieee80211_wake_queue(sc->hw, txq->qnum); } static void @@ -2233,10 +1803,11 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) * default antenna which is supposed to be an omni. * * Note2: On sectored scenarios it's possible to have - * multiple antennas (1omni -the default- and 14 sectors) - * so if we choose to actually support this mode we need - * to allow user to set how many antennas we have and tweak - * the code below to send beacons on all of them. + * multiple antennas (1 omni -- the default -- and 14 + * sectors), so if we choose to actually support this + * mode, we need to allow the user to set how many antennas + * we have and tweak the code below to send beacons + * on all of them. */ if (ah->ah_ant_mode == AR5K_ANTMODE_SECTOR_AP) antenna = sc->bsent & 4 ? 2 : 1; @@ -2262,30 +1833,65 @@ err_unmap: } /* + * Updates the beacon that is sent by ath5k_beacon_send. For adhoc, + * this is called only once at config_bss time, for AP we do it every + * SWBA interrupt so that the TIM will reflect buffered frames. + * + * Called with the beacon lock. + */ +static int +ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif) +{ + int ret; + struct ath5k_softc *sc = hw->priv; + struct ath5k_vif *avf = (void *)vif->drv_priv; + struct sk_buff *skb; + + if (WARN_ON(!vif)) { + ret = -EINVAL; + goto out; + } + + skb = ieee80211_beacon_get(hw, vif); + + if (!skb) { + ret = -ENOMEM; + goto out; + } + + ath5k_debug_dump_skb(sc, skb, "BC ", 1); + + ath5k_txbuf_free_skb(sc, avf->bbuf); + avf->bbuf->skb = skb; + ret = ath5k_beacon_setup(sc, avf->bbuf); + if (ret) + avf->bbuf->skb = NULL; +out: + return ret; +} + +/* * Transmit a beacon frame at SWBA. Dynamic updates to the * frame contents are done as needed and the slot time is * also adjusted based on current state. * - * This is called from software irq context (beacontq or restq - * tasklets) or user context from ath5k_beacon_config. + * This is called from software irq context (beacontq tasklets) + * or user context from ath5k_beacon_config. */ static void ath5k_beacon_send(struct ath5k_softc *sc) { - struct ath5k_buf *bf = sc->bbuf; struct ath5k_hw *ah = sc->ah; + struct ieee80211_vif *vif; + struct ath5k_vif *avf; + struct ath5k_buf *bf; struct sk_buff *skb; ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "in beacon_send\n"); - if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION || - sc->opmode == NL80211_IFTYPE_MONITOR)) { - ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL); - return; - } /* * Check if the previous beacon has gone out. If - * not don't don't try to post another, skip this + * not, don't don't try to post another: skip this * period and wait for the next. Missed beacons * indicate a problem and should not occur. If we * miss too many consecutive beacons reset the device. @@ -2298,7 +1904,9 @@ ath5k_beacon_send(struct ath5k_softc *sc) ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "stuck beacon time (%u missed)\n", sc->bmisscount); - tasklet_schedule(&sc->restq); + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, + "stuck beacon, resetting\n"); + ieee80211_queue_work(sc->hw, &sc->reset_work); } return; } @@ -2309,6 +1917,28 @@ ath5k_beacon_send(struct ath5k_softc *sc) sc->bmisscount = 0; } + if (sc->opmode == NL80211_IFTYPE_AP && sc->num_ap_vifs > 1) { + u64 tsf = ath5k_hw_get_tsf64(ah); + u32 tsftu = TSF_TO_TU(tsf); + int slot = ((tsftu % sc->bintval) * ATH_BCBUF) / sc->bintval; + vif = sc->bslot[(slot + 1) % ATH_BCBUF]; + ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, + "tsf %llx tsftu %x intval %u slot %u vif %p\n", + (unsigned long long)tsf, tsftu, sc->bintval, slot, vif); + } else /* only one interface */ + vif = sc->bslot[0]; + + if (!vif) + return; + + avf = (void *)vif->drv_priv; + bf = avf->bbuf; + if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION || + sc->opmode == NL80211_IFTYPE_MONITOR)) { + ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL); + return; + } + /* * Stop any current dma and put the new frame on the queue. * This should never fail since we check above that no frames @@ -2321,23 +1951,22 @@ ath5k_beacon_send(struct ath5k_softc *sc) /* refresh the beacon for AP mode */ if (sc->opmode == NL80211_IFTYPE_AP) - ath5k_beacon_update(sc->hw, sc->vif); + ath5k_beacon_update(sc->hw, vif); ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr); ath5k_hw_start_tx_dma(ah, sc->bhalq); ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n", sc->bhalq, (unsigned long long)bf->daddr, bf->desc); - skb = ieee80211_get_buffered_bc(sc->hw, sc->vif); + skb = ieee80211_get_buffered_bc(sc->hw, vif); while (skb) { ath5k_tx_queue(sc->hw, skb, sc->cabq); - skb = ieee80211_get_buffered_bc(sc->hw, sc->vif); + skb = ieee80211_get_buffered_bc(sc->hw, vif); } sc->bsent++; } - /** * ath5k_beacon_update_timers - update beacon timers * @@ -2362,6 +1991,12 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf) u64 hw_tsf; intval = sc->bintval & AR5K_BEACON_PERIOD; + if (sc->opmode == NL80211_IFTYPE_AP && sc->num_ap_vifs > 1) { + intval /= ATH_BCBUF; /* staggered multi-bss beacons */ + if (intval < 15) + ATH5K_WARN(sc, "intval %u is too low, min 15\n", + intval); + } if (WARN_ON(!intval)) return; @@ -2372,8 +2007,11 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf) hw_tsf = ath5k_hw_get_tsf64(ah); hw_tu = TSF_TO_TU(hw_tsf); -#define FUDGE 3 - /* we use FUDGE to make sure the next TBTT is ahead of the current TU */ +#define FUDGE AR5K_TUNE_SW_BEACON_RESP + 3 + /* We use FUDGE to make sure the next TBTT is ahead of the current TU. + * Since we later substract AR5K_TUNE_SW_BEACON_RESP (10) in the timer + * configuration we need to make sure it is bigger than that. */ + if (bc_tsf == -1) { /* * no beacons received, called internally. @@ -2439,7 +2077,6 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf) intval & AR5K_BEACON_RESET_TSF ? "AR5K_BEACON_RESET_TSF" : ""); } - /** * ath5k_beacon_config - Configure the beacon queues and interrupts * @@ -2518,152 +2155,6 @@ static void ath5k_tasklet_beacon(unsigned long data) * Interrupt handling * \********************/ -static int -ath5k_init(struct ath5k_softc *sc) -{ - struct ath5k_hw *ah = sc->ah; - int ret, i; - - mutex_lock(&sc->lock); - - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mode %d\n", sc->opmode); - - /* - * Stop anything previously setup. This is safe - * no matter this is the first time through or not. - */ - ath5k_stop_locked(sc); - - /* - * The basic interface to setting the hardware in a good - * state is ``reset''. On return the hardware is known to - * be powered up and with interrupts disabled. This must - * be followed by initialization of the appropriate bits - * and then setup of the interrupt mask. - */ - sc->curchan = sc->hw->conf.channel; - sc->curband = &sc->sbands[sc->curchan->band]; - sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL | - AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL | - AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB; - - ret = ath5k_reset(sc, NULL); - if (ret) - goto done; - - ath5k_rfkill_hw_start(ah); - - /* - * Reset the key cache since some parts do not reset the - * contents on initial power up or resume from suspend. - */ - for (i = 0; i < AR5K_KEYTABLE_SIZE; i++) - ath5k_hw_reset_key(ah, i); - - ath5k_hw_set_ack_bitrate_high(ah, true); - ret = 0; -done: - mmiowb(); - mutex_unlock(&sc->lock); - return ret; -} - -static int -ath5k_stop_locked(struct ath5k_softc *sc) -{ - struct ath5k_hw *ah = sc->ah; - - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "invalid %u\n", - test_bit(ATH_STAT_INVALID, sc->status)); - - /* - * Shutdown the hardware and driver: - * stop output from above - * disable interrupts - * turn off timers - * turn off the radio - * clear transmit machinery - * clear receive machinery - * drain and release tx queues - * reclaim beacon resources - * power down hardware - * - * Note that some of this work is not possible if the - * hardware is gone (invalid). - */ - ieee80211_stop_queues(sc->hw); - - if (!test_bit(ATH_STAT_INVALID, sc->status)) { - ath5k_led_off(sc); - ath5k_hw_set_imr(ah, 0); - synchronize_irq(sc->pdev->irq); - } - ath5k_txq_cleanup(sc); - if (!test_bit(ATH_STAT_INVALID, sc->status)) { - ath5k_rx_stop(sc); - ath5k_hw_phy_disable(ah); - } else - sc->rxlink = NULL; - - return 0; -} - -/* - * Stop the device, grabbing the top-level lock to protect - * against concurrent entry through ath5k_init (which can happen - * if another thread does a system call and the thread doing the - * stop is preempted). - */ -static int -ath5k_stop_hw(struct ath5k_softc *sc) -{ - int ret; - - mutex_lock(&sc->lock); - ret = ath5k_stop_locked(sc); - if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) { - /* - * Don't set the card in full sleep mode! - * - * a) When the device is in this state it must be carefully - * woken up or references to registers in the PCI clock - * domain may freeze the bus (and system). This varies - * by chip and is mostly an issue with newer parts - * (madwifi sources mentioned srev >= 0x78) that go to - * sleep more quickly. - * - * b) On older chips full sleep results a weird behaviour - * during wakeup. I tested various cards with srev < 0x78 - * and they don't wake up after module reload, a second - * module reload is needed to bring the card up again. - * - * Until we figure out what's going on don't enable - * full chip reset on any chip (this is what Legacy HAL - * and Sam's HAL do anyway). Instead Perform a full reset - * on the device (same as initial state after attach) and - * leave it idle (keep MAC/BB on warm reset) */ - ret = ath5k_hw_on_hold(sc->ah); - - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, - "putting device to sleep\n"); - } - ath5k_txbuf_free(sc, sc->bbuf); - - mmiowb(); - mutex_unlock(&sc->lock); - - tasklet_kill(&sc->rxtq); - tasklet_kill(&sc->txtq); - tasklet_kill(&sc->restq); - tasklet_kill(&sc->calib); - tasklet_kill(&sc->beacontq); - tasklet_kill(&sc->ani_tasklet); - - ath5k_rfkill_hw_stop(sc->ah); - - return ret; -} - static void ath5k_intr_calibration_poll(struct ath5k_hw *ah) { @@ -2705,7 +2196,9 @@ ath5k_intr(int irq, void *dev_id) * Fatal errors are unrecoverable. * Typically these are caused by DMA errors. */ - tasklet_schedule(&sc->restq); + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, + "fatal int, resetting\n"); + ieee80211_queue_work(sc->hw, &sc->reset_work); } else if (unlikely(status & AR5K_INT_RXORN)) { /* * Receive buffers are full. Either the bus is busy or @@ -2717,8 +2210,11 @@ ath5k_intr(int irq, void *dev_id) * this guess is copied from the HAL. */ sc->stats.rxorn_intr++; - if (ah->ah_mac_srev < AR5K_SREV_AR5212) - tasklet_schedule(&sc->restq); + if (ah->ah_mac_srev < AR5K_SREV_AR5212) { + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, + "rx overrun, resetting\n"); + ieee80211_queue_work(sc->hw, &sc->reset_work); + } else tasklet_schedule(&sc->rxtq); } else { @@ -2731,7 +2227,7 @@ ath5k_intr(int irq, void *dev_id) * RXE bit is written, but it doesn't work at * least on older hardware revs. */ - sc->rxlink = NULL; + sc->stats.rxeol_intr++; } if (status & AR5K_INT_TXURN) { /* bump tx trigger level */ @@ -2764,14 +2260,6 @@ ath5k_intr(int irq, void *dev_id) return IRQ_HANDLED; } -static void -ath5k_tasklet_reset(unsigned long data) -{ - struct ath5k_softc *sc = (void *)data; - - ath5k_reset(sc, sc->curchan); -} - /* * Periodically recalibrate the PHY to account * for temperature/environment changes. @@ -2785,10 +2273,6 @@ ath5k_tasklet_calibrate(unsigned long data) /* Only full calibration for now */ ah->ah_cal_mask |= AR5K_CALIBRATION_FULL; - /* Stop queues so that calibration - * doesn't interfere with tx */ - ieee80211_stop_queues(sc->hw); - ATH5K_DBG(sc, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n", ieee80211_frequency_to_channel(sc->curchan->center_freq), sc->curchan->hw_value); @@ -2799,15 +2283,22 @@ ath5k_tasklet_calibrate(unsigned long data) * to load new gain values. */ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "calibration, resetting\n"); - ath5k_reset(sc, sc->curchan); + ieee80211_queue_work(sc->hw, &sc->reset_work); } if (ath5k_hw_phy_calibrate(ah, sc->curchan)) ATH5K_ERR(sc, "calibration of channel %u failed\n", ieee80211_frequency_to_channel( sc->curchan->center_freq)); - /* Wake queues */ - ieee80211_wake_queues(sc->hw); + /* Noise floor calibration interrupts rx/tx path while I/Q calibration + * doesn't. + * TODO: We should stop TX here, so that it doesn't interfere. + * Note that stopping the queues is not enough to stop TX! */ + if (time_is_before_eq_jiffies(ah->ah_cal_next_nf)) { + ah->ah_cal_next_nf = jiffies + + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_NF); + ath5k_hw_update_noise_floor(ah); + } ah->ah_cal_mask &= ~AR5K_CALIBRATION_FULL; } @@ -2825,76 +2316,215 @@ ath5k_tasklet_ani(unsigned long data) } -/********************\ -* Mac80211 functions * -\********************/ +static void +ath5k_tx_complete_poll_work(struct work_struct *work) +{ + struct ath5k_softc *sc = container_of(work, struct ath5k_softc, + tx_complete_work.work); + struct ath5k_txq *txq; + int i; + bool needreset = false; + + for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) { + if (sc->txqs[i].setup) { + txq = &sc->txqs[i]; + spin_lock_bh(&txq->lock); + if (txq->txq_len > 1) { + if (txq->txq_poll_mark) { + ATH5K_DBG(sc, ATH5K_DEBUG_XMIT, + "TX queue stuck %d\n", + txq->qnum); + needreset = true; + txq->txq_stuck++; + spin_unlock_bh(&txq->lock); + break; + } else { + txq->txq_poll_mark = true; + } + } + spin_unlock_bh(&txq->lock); + } + } + + if (needreset) { + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, + "TX queues stuck, resetting\n"); + ath5k_reset(sc, sc->curchan); + } + + ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, + msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT)); +} + + +/*************************\ +* Initialization routines * +\*************************/ static int -ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +ath5k_stop_locked(struct ath5k_softc *sc) { - struct ath5k_softc *sc = hw->priv; + struct ath5k_hw *ah = sc->ah; + + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "invalid %u\n", + test_bit(ATH_STAT_INVALID, sc->status)); - return ath5k_tx_queue(hw, skb, sc->txq); + /* + * Shutdown the hardware and driver: + * stop output from above + * disable interrupts + * turn off timers + * turn off the radio + * clear transmit machinery + * clear receive machinery + * drain and release tx queues + * reclaim beacon resources + * power down hardware + * + * Note that some of this work is not possible if the + * hardware is gone (invalid). + */ + ieee80211_stop_queues(sc->hw); + + if (!test_bit(ATH_STAT_INVALID, sc->status)) { + ath5k_led_off(sc); + ath5k_hw_set_imr(ah, 0); + synchronize_irq(sc->pdev->irq); + } + ath5k_txq_cleanup(sc); + if (!test_bit(ATH_STAT_INVALID, sc->status)) { + ath5k_rx_stop(sc); + ath5k_hw_phy_disable(ah); + } + + return 0; } -static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ath5k_txq *txq) +static int +ath5k_init(struct ath5k_softc *sc) { - struct ath5k_softc *sc = hw->priv; - struct ath5k_buf *bf; - unsigned long flags; - int padsize; + struct ath5k_hw *ah = sc->ah; + struct ath_common *common = ath5k_hw_common(ah); + int ret, i; - ath5k_debug_dump_skb(sc, skb, "TX ", 1); + mutex_lock(&sc->lock); - if (sc->opmode == NL80211_IFTYPE_MONITOR) - ATH5K_DBG(sc, ATH5K_DEBUG_XMIT, "tx in monitor (scan?)\n"); + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mode %d\n", sc->opmode); /* - * the hardware expects the header padded to 4 byte boundaries - * if this is not the case we add the padding after the header + * Stop anything previously setup. This is safe + * no matter this is the first time through or not. */ - padsize = ath5k_add_padding(skb); - if (padsize < 0) { - ATH5K_ERR(sc, "tx hdrlen not %%4: not enough" - " headroom to pad"); - goto drop_packet; - } + ath5k_stop_locked(sc); - spin_lock_irqsave(&sc->txbuflock, flags); - if (list_empty(&sc->txbuf)) { - ATH5K_ERR(sc, "no further txbuf available, dropping packet\n"); - spin_unlock_irqrestore(&sc->txbuflock, flags); - ieee80211_stop_queue(hw, skb_get_queue_mapping(skb)); - goto drop_packet; - } - bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list); - list_del(&bf->list); - sc->txbuf_len--; - if (list_empty(&sc->txbuf)) - ieee80211_stop_queues(hw); - spin_unlock_irqrestore(&sc->txbuflock, flags); + /* + * The basic interface to setting the hardware in a good + * state is ``reset''. On return the hardware is known to + * be powered up and with interrupts disabled. This must + * be followed by initialization of the appropriate bits + * and then setup of the interrupt mask. + */ + sc->curchan = sc->hw->conf.channel; + sc->curband = &sc->sbands[sc->curchan->band]; + sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL | + AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL | + AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB; - bf->skb = skb; + ret = ath5k_reset(sc, NULL); + if (ret) + goto done; - if (ath5k_txbuf_setup(sc, bf, txq, padsize)) { - bf->skb = NULL; - spin_lock_irqsave(&sc->txbuflock, flags); - list_add_tail(&bf->list, &sc->txbuf); - sc->txbuf_len++; - spin_unlock_irqrestore(&sc->txbuflock, flags); - goto drop_packet; + ath5k_rfkill_hw_start(ah); + + /* + * Reset the key cache since some parts do not reset the + * contents on initial power up or resume from suspend. + */ + for (i = 0; i < common->keymax; i++) + ath_hw_keyreset(common, (u16) i); + + ath5k_hw_set_ack_bitrate_high(ah, true); + + for (i = 0; i < ARRAY_SIZE(sc->bslot); i++) + sc->bslot[i] = NULL; + + ret = 0; +done: + mmiowb(); + mutex_unlock(&sc->lock); + + ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, + msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT)); + + return ret; +} + +static void stop_tasklets(struct ath5k_softc *sc) +{ + tasklet_kill(&sc->rxtq); + tasklet_kill(&sc->txtq); + tasklet_kill(&sc->calib); + tasklet_kill(&sc->beacontq); + tasklet_kill(&sc->ani_tasklet); +} + +/* + * Stop the device, grabbing the top-level lock to protect + * against concurrent entry through ath5k_init (which can happen + * if another thread does a system call and the thread doing the + * stop is preempted). + */ +static int +ath5k_stop_hw(struct ath5k_softc *sc) +{ + int ret; + + mutex_lock(&sc->lock); + ret = ath5k_stop_locked(sc); + if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) { + /* + * Don't set the card in full sleep mode! + * + * a) When the device is in this state it must be carefully + * woken up or references to registers in the PCI clock + * domain may freeze the bus (and system). This varies + * by chip and is mostly an issue with newer parts + * (madwifi sources mentioned srev >= 0x78) that go to + * sleep more quickly. + * + * b) On older chips full sleep results a weird behaviour + * during wakeup. I tested various cards with srev < 0x78 + * and they don't wake up after module reload, a second + * module reload is needed to bring the card up again. + * + * Until we figure out what's going on don't enable + * full chip reset on any chip (this is what Legacy HAL + * and Sam's HAL do anyway). Instead Perform a full reset + * on the device (same as initial state after attach) and + * leave it idle (keep MAC/BB on warm reset) */ + ret = ath5k_hw_on_hold(sc->ah); + + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, + "putting device to sleep\n"); } - return NETDEV_TX_OK; -drop_packet: - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; + mmiowb(); + mutex_unlock(&sc->lock); + + stop_tasklets(sc); + + cancel_delayed_work_sync(&sc->tx_complete_work); + + ath5k_rfkill_hw_stop(sc->ah); + + return ret; } /* * Reset the hardware. If chan is not NULL, then also pause rx/tx * and change to the given channel. + * + * This should be called with sc->lock. */ static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan) @@ -2904,8 +2534,11 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan) ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n"); + ath5k_hw_set_imr(ah, 0); + synchronize_irq(sc->pdev->irq); + stop_tasklets(sc); + if (chan) { - ath5k_hw_set_imr(ah, 0); ath5k_txq_cleanup(sc); ath5k_rx_stop(sc); @@ -2926,6 +2559,10 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan) ath5k_ani_init(ah, ah->ah_sc->ani_state.ani_mode); + ah->ah_cal_next_full = jiffies; + ah->ah_cal_next_ani = jiffies; + ah->ah_cal_next_nf = jiffies; + /* * Change channels and update the h/w rate map if we're switching; * e.g. 11a to 11b/g. @@ -2947,6 +2584,218 @@ err: return ret; } +static void ath5k_reset_work(struct work_struct *work) +{ + struct ath5k_softc *sc = container_of(work, struct ath5k_softc, + reset_work); + + mutex_lock(&sc->lock); + ath5k_reset(sc, sc->curchan); + mutex_unlock(&sc->lock); +} + +static int +ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) +{ + struct ath5k_softc *sc = hw->priv; + struct ath5k_hw *ah = sc->ah; + struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah); + struct ath5k_txq *txq; + u8 mac[ETH_ALEN] = {}; + int ret; + + ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device); + + /* + * Check if the MAC has multi-rate retry support. + * We do this by trying to setup a fake extended + * descriptor. MACs that don't have support will + * return false w/o doing anything. MACs that do + * support it will return true w/o doing anything. + */ + ret = ath5k_hw_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0); + + if (ret < 0) + goto err; + if (ret > 0) + __set_bit(ATH_STAT_MRRETRY, sc->status); + + /* + * Collect the channel list. The 802.11 layer + * is resposible for filtering this list based + * on settings like the phy mode and regulatory + * domain restrictions. + */ + ret = ath5k_setup_bands(hw); + if (ret) { + ATH5K_ERR(sc, "can't get channels\n"); + goto err; + } + + /* NB: setup here so ath5k_rate_update is happy */ + if (test_bit(AR5K_MODE_11A, ah->ah_modes)) + ath5k_setcurmode(sc, AR5K_MODE_11A); + else + ath5k_setcurmode(sc, AR5K_MODE_11B); + + /* + * Allocate tx+rx descriptors and populate the lists. + */ + ret = ath5k_desc_alloc(sc, pdev); + if (ret) { + ATH5K_ERR(sc, "can't allocate descriptors\n"); + goto err; + } + + /* + * Allocate hardware transmit queues: one queue for + * beacon frames and one data queue for each QoS + * priority. Note that hw functions handle resetting + * these queues at the needed time. + */ + ret = ath5k_beaconq_setup(ah); + if (ret < 0) { + ATH5K_ERR(sc, "can't setup a beacon xmit queue\n"); + goto err_desc; + } + sc->bhalq = ret; + sc->cabq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_CAB, 0); + if (IS_ERR(sc->cabq)) { + ATH5K_ERR(sc, "can't setup cab queue\n"); + ret = PTR_ERR(sc->cabq); + goto err_bhal; + } + + /* This order matches mac80211's queue priority, so we can + * directly use the mac80211 queue number without any mapping */ + txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VO); + if (IS_ERR(txq)) { + ATH5K_ERR(sc, "can't setup xmit queue\n"); + ret = PTR_ERR(txq); + goto err_queues; + } + txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VI); + if (IS_ERR(txq)) { + ATH5K_ERR(sc, "can't setup xmit queue\n"); + ret = PTR_ERR(txq); + goto err_queues; + } + txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE); + if (IS_ERR(txq)) { + ATH5K_ERR(sc, "can't setup xmit queue\n"); + ret = PTR_ERR(txq); + goto err_queues; + } + txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK); + if (IS_ERR(txq)) { + ATH5K_ERR(sc, "can't setup xmit queue\n"); + ret = PTR_ERR(txq); + goto err_queues; + } + hw->queues = 4; + + tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc); + tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc); + tasklet_init(&sc->calib, ath5k_tasklet_calibrate, (unsigned long)sc); + tasklet_init(&sc->beacontq, ath5k_tasklet_beacon, (unsigned long)sc); + tasklet_init(&sc->ani_tasklet, ath5k_tasklet_ani, (unsigned long)sc); + + INIT_WORK(&sc->reset_work, ath5k_reset_work); + INIT_DELAYED_WORK(&sc->tx_complete_work, ath5k_tx_complete_poll_work); + + ret = ath5k_eeprom_read_mac(ah, mac); + if (ret) { + ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n", + sc->pdev->device); + goto err_queues; + } + + SET_IEEE80211_PERM_ADDR(hw, mac); + memcpy(&sc->lladdr, mac, ETH_ALEN); + /* All MAC address bits matter for ACKs */ + ath5k_update_bssid_mask_and_opmode(sc, NULL); + + regulatory->current_rd = ah->ah_capabilities.cap_eeprom.ee_regdomain; + ret = ath_regd_init(regulatory, hw->wiphy, ath5k_reg_notifier); + if (ret) { + ATH5K_ERR(sc, "can't initialize regulatory system\n"); + goto err_queues; + } + + ret = ieee80211_register_hw(hw); + if (ret) { + ATH5K_ERR(sc, "can't register ieee80211 hw\n"); + goto err_queues; + } + + if (!ath_is_world_regd(regulatory)) + regulatory_hint(hw->wiphy, regulatory->alpha2); + + ath5k_init_leds(sc); + + ath5k_sysfs_register(sc); + + return 0; +err_queues: + ath5k_txq_release(sc); +err_bhal: + ath5k_hw_release_tx_queue(ah, sc->bhalq); +err_desc: + ath5k_desc_free(sc, pdev); +err: + return ret; +} + +static void +ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw) +{ + struct ath5k_softc *sc = hw->priv; + + /* + * NB: the order of these is important: + * o call the 802.11 layer before detaching ath5k_hw to + * ensure callbacks into the driver to delete global + * key cache entries can be handled + * o reclaim the tx queue data structures after calling + * the 802.11 layer as we'll get called back to reclaim + * node state and potentially want to use them + * o to cleanup the tx queues the hal is called, so detach + * it last + * XXX: ??? detach ath5k_hw ??? + * Other than that, it's straightforward... + */ + ieee80211_unregister_hw(hw); + ath5k_desc_free(sc, pdev); + ath5k_txq_release(sc); + ath5k_hw_release_tx_queue(sc->ah, sc->bhalq); + ath5k_unregister_leds(sc); + + ath5k_sysfs_unregister(sc); + /* + * NB: can't reclaim these until after ieee80211_ifdetach + * returns because we'll get called back to reclaim node + * state and potentially want to use them. + */ +} + +/********************\ +* Mac80211 functions * +\********************/ + +static int +ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +{ + struct ath5k_softc *sc = hw->priv; + u16 qnum = skb_get_queue_mapping(skb); + + if (WARN_ON(qnum >= sc->ah->ah_capabilities.cap_queues.q_tx_num)) { + dev_kfree_skb_any(skb); + return 0; + } + + return ath5k_tx_queue(hw, skb, &sc->txqs[qnum]); +} + static int ath5k_start(struct ieee80211_hw *hw) { return ath5k_init(hw->priv); @@ -2962,32 +2811,78 @@ static int ath5k_add_interface(struct ieee80211_hw *hw, { struct ath5k_softc *sc = hw->priv; int ret; + struct ath5k_vif *avf = (void *)vif->drv_priv; mutex_lock(&sc->lock); - if (sc->vif) { - ret = 0; + + if ((vif->type == NL80211_IFTYPE_AP || + vif->type == NL80211_IFTYPE_ADHOC) + && (sc->num_ap_vifs + sc->num_adhoc_vifs) >= ATH_BCBUF) { + ret = -ELNRNG; goto end; } - sc->vif = vif; + /* Don't allow other interfaces if one ad-hoc is configured. + * TODO: Fix the problems with ad-hoc and multiple other interfaces. + * We would need to operate the HW in ad-hoc mode to allow TSF updates + * for the IBSS, but this breaks with additional AP or STA interfaces + * at the moment. */ + if (sc->num_adhoc_vifs || + (sc->nvifs && vif->type == NL80211_IFTYPE_ADHOC)) { + ATH5K_ERR(sc, "Only one single ad-hoc interface is allowed.\n"); + ret = -ELNRNG; + goto end; + } switch (vif->type) { case NL80211_IFTYPE_AP: case NL80211_IFTYPE_STATION: case NL80211_IFTYPE_ADHOC: case NL80211_IFTYPE_MESH_POINT: - case NL80211_IFTYPE_MONITOR: - sc->opmode = vif->type; + avf->opmode = vif->type; break; default: ret = -EOPNOTSUPP; goto end; } - ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "add interface mode %d\n", sc->opmode); + sc->nvifs++; + ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "add interface mode %d\n", avf->opmode); + + /* Assign the vap/adhoc to a beacon xmit slot. */ + if ((avf->opmode == NL80211_IFTYPE_AP) || + (avf->opmode == NL80211_IFTYPE_ADHOC)) { + int slot; + + WARN_ON(list_empty(&sc->bcbuf)); + avf->bbuf = list_first_entry(&sc->bcbuf, struct ath5k_buf, + list); + list_del(&avf->bbuf->list); + + avf->bslot = 0; + for (slot = 0; slot < ATH_BCBUF; slot++) { + if (!sc->bslot[slot]) { + avf->bslot = slot; + break; + } + } + BUG_ON(sc->bslot[avf->bslot] != NULL); + sc->bslot[avf->bslot] = vif; + if (avf->opmode == NL80211_IFTYPE_AP) + sc->num_ap_vifs++; + else + sc->num_adhoc_vifs++; + } + /* Any MAC address is fine, all others are included through the + * filter. + */ + memcpy(&sc->lladdr, vif->addr, ETH_ALEN); ath5k_hw_set_lladdr(sc->ah, vif->addr); - ath5k_mode_setup(sc); + + memcpy(&avf->lladdr, vif->addr, ETH_ALEN); + + ath5k_mode_setup(sc, vif); ret = 0; end: @@ -3000,15 +2895,29 @@ ath5k_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { struct ath5k_softc *sc = hw->priv; - u8 mac[ETH_ALEN] = {}; + struct ath5k_vif *avf = (void *)vif->drv_priv; + unsigned int i; mutex_lock(&sc->lock); - if (sc->vif != vif) - goto end; + sc->nvifs--; + + if (avf->bbuf) { + ath5k_txbuf_free_skb(sc, avf->bbuf); + list_add_tail(&avf->bbuf->list, &sc->bcbuf); + for (i = 0; i < ATH_BCBUF; i++) { + if (sc->bslot[i] == vif) { + sc->bslot[i] = NULL; + break; + } + } + avf->bbuf = NULL; + } + if (avf->opmode == NL80211_IFTYPE_AP) + sc->num_ap_vifs--; + else if (avf->opmode == NL80211_IFTYPE_ADHOC) + sc->num_adhoc_vifs--; - ath5k_hw_set_lladdr(sc->ah, mac); - sc->vif = NULL; -end: + ath5k_update_bssid_mask_and_opmode(sc, NULL); mutex_unlock(&sc->lock); } @@ -3091,6 +3000,19 @@ static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw, return ((u64)(mfilt[1]) << 32) | mfilt[0]; } +static bool ath_any_vif_assoc(struct ath5k_softc *sc) +{ + struct ath_vif_iter_data iter_data; + iter_data.hw_macaddr = NULL; + iter_data.any_assoc = false; + iter_data.need_set_hw_addr = false; + iter_data.found_active = true; + + ieee80211_iterate_active_interfaces_atomic(sc->hw, ath_vif_iter, + &iter_data); + return iter_data.any_assoc; +} + #define SUPPORTED_FIF_FLAGS \ FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | \ FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \ @@ -3160,9 +3082,9 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw, rfilt |= AR5K_RX_FILTER_PHYERR; /* FIF_BCN_PRBRESP_PROMISC really means to enable beacons - * and probes for any BSSID, this needs testing */ - if (*new_flags & FIF_BCN_PRBRESP_PROMISC) - rfilt |= AR5K_RX_FILTER_BEACON | AR5K_RX_FILTER_PROBEREQ; + * and probes for any BSSID */ + if ((*new_flags & FIF_BCN_PRBRESP_PROMISC) || (sc->nvifs > 1)) + rfilt |= AR5K_RX_FILTER_BEACON; /* FIF_CONTROL doc says that if FIF_PROMISC_IN_BSS is not * set we should only pass on control frames for this @@ -3178,7 +3100,6 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw, switch (sc->opmode) { case NL80211_IFTYPE_MESH_POINT: - case NL80211_IFTYPE_MONITOR: rfilt |= AR5K_RX_FILTER_CONTROL | AR5K_RX_FILTER_BEACON | AR5K_RX_FILTER_PROBEREQ | @@ -3201,7 +3122,7 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw, /* Set multicast bits */ ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]); - /* Set the cached hw filter flags, this will alter actually + /* Set the cached hw filter flags, this will later actually * be set in HW */ sc->filter_flags = rfilt; @@ -3221,17 +3142,14 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, if (modparam_nohwcrypt) return -EOPNOTSUPP; - if (sc->opmode == NL80211_IFTYPE_AP) - return -EOPNOTSUPP; - - switch (key->alg) { - case ALG_WEP: - case ALG_TKIP: + switch (key->cipher) { + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: + case WLAN_CIPHER_SUITE_TKIP: break; - case ALG_CCMP: - if (sc->ah->ah_aes_support) + case WLAN_CIPHER_SUITE_CCMP: + if (common->crypt_caps & ATH_CRYPT_CAP_CIPHER_AESCCM) break; - return -EOPNOTSUPP; default: WARN_ON(1); @@ -3242,27 +3160,25 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, switch (cmd) { case SET_KEY: - ret = ath5k_hw_set_key(sc->ah, key->keyidx, key, - sta ? sta->addr : NULL); - if (ret) { - ATH5K_ERR(sc, "can't set the key\n"); - goto unlock; + ret = ath_key_config(common, vif, sta, key); + if (ret >= 0) { + key->hw_key_idx = ret; + /* push IV and Michael MIC generation to stack */ + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + if (key->cipher == WLAN_CIPHER_SUITE_TKIP) + key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; + if (key->cipher == WLAN_CIPHER_SUITE_CCMP) + key->flags |= IEEE80211_KEY_FLAG_SW_MGMT; + ret = 0; } - __set_bit(key->keyidx, common->keymap); - key->hw_key_idx = key->keyidx; - key->flags |= (IEEE80211_KEY_FLAG_GENERATE_IV | - IEEE80211_KEY_FLAG_GENERATE_MMIC); break; case DISABLE_KEY: - ath5k_hw_reset_key(sc->ah, key->keyidx); - __clear_bit(key->keyidx, common->keymap); + ath_key_delete(common, key); break; default: ret = -EINVAL; - goto unlock; } -unlock: mmiowb(); mutex_unlock(&sc->lock); return ret; @@ -3332,43 +3248,6 @@ ath5k_reset_tsf(struct ieee80211_hw *hw) ath5k_hw_reset_tsf(sc->ah); } -/* - * Updates the beacon that is sent by ath5k_beacon_send. For adhoc, - * this is called only once at config_bss time, for AP we do it every - * SWBA interrupt so that the TIM will reflect buffered frames. - * - * Called with the beacon lock. - */ -static int -ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif) -{ - int ret; - struct ath5k_softc *sc = hw->priv; - struct sk_buff *skb; - - if (WARN_ON(!vif)) { - ret = -EINVAL; - goto out; - } - - skb = ieee80211_beacon_get(hw, vif); - - if (!skb) { - ret = -ENOMEM; - goto out; - } - - ath5k_debug_dump_skb(sc, skb, "BC ", 1); - - ath5k_txbuf_free(sc, sc->bbuf); - sc->bbuf->skb = skb; - ret = ath5k_beacon_setup(sc, sc->bbuf); - if (ret) - sc->bbuf->skb = NULL; -out: - return ret; -} - static void set_beacon_filter(struct ieee80211_hw *hw, bool enable) { @@ -3389,20 +3268,19 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_bss_conf *bss_conf, u32 changes) { + struct ath5k_vif *avf = (void *)vif->drv_priv; struct ath5k_softc *sc = hw->priv; struct ath5k_hw *ah = sc->ah; struct ath_common *common = ath5k_hw_common(ah); unsigned long flags; mutex_lock(&sc->lock); - if (WARN_ON(sc->vif != vif)) - goto unlock; if (changes & BSS_CHANGED_BSSID) { /* Cache for later use during resets */ memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN); common->curaid = 0; - ath5k_hw_set_associd(ah); + ath5k_hw_set_bssid(ah); mmiowb(); } @@ -3410,7 +3288,12 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw, sc->bintval = bss_conf->beacon_int; if (changes & BSS_CHANGED_ASSOC) { - sc->assoc = bss_conf->assoc; + avf->assoc = bss_conf->assoc; + if (bss_conf->assoc) + sc->assoc = bss_conf->assoc; + else + sc->assoc = ath_any_vif_assoc(sc); + if (sc->opmode == NL80211_IFTYPE_STATION) set_beacon_filter(hw, sc->assoc); ath5k_hw_set_ledstate(sc->ah, sc->assoc ? @@ -3420,7 +3303,7 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw, "Bss Info ASSOC %d, bssid: %pM\n", bss_conf->aid, common->curbssid); common->curaid = bss_conf->aid; - ath5k_hw_set_associd(ah); + ath5k_hw_set_bssid(ah); /* Once ANI is available you would start it here */ } } @@ -3438,7 +3321,6 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw, BSS_CHANGED_BEACON_INT)) ath5k_beacon_config(sc); - unlock: mutex_unlock(&sc->lock); } @@ -3474,3 +3356,400 @@ static void ath5k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class) ath5k_hw_set_coverage_class(sc->ah, coverage_class); mutex_unlock(&sc->lock); } + +static int ath5k_conf_tx(struct ieee80211_hw *hw, u16 queue, + const struct ieee80211_tx_queue_params *params) +{ + struct ath5k_softc *sc = hw->priv; + struct ath5k_hw *ah = sc->ah; + struct ath5k_txq_info qi; + int ret = 0; + + if (queue >= ah->ah_capabilities.cap_queues.q_tx_num) + return 0; + + mutex_lock(&sc->lock); + + ath5k_hw_get_tx_queueprops(ah, queue, &qi); + + qi.tqi_aifs = params->aifs; + qi.tqi_cw_min = params->cw_min; + qi.tqi_cw_max = params->cw_max; + qi.tqi_burst_time = params->txop; + + ATH5K_DBG(sc, ATH5K_DEBUG_ANY, + "Configure tx [queue %d], " + "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n", + queue, params->aifs, params->cw_min, + params->cw_max, params->txop); + + if (ath5k_hw_set_tx_queueprops(ah, queue, &qi)) { + ATH5K_ERR(sc, + "Unable to update hardware queue %u!\n", queue); + ret = -EIO; + } else + ath5k_hw_reset_tx_queue(ah, queue); + + mutex_unlock(&sc->lock); + + return ret; +} + +static const struct ieee80211_ops ath5k_hw_ops = { + .tx = ath5k_tx, + .start = ath5k_start, + .stop = ath5k_stop, + .add_interface = ath5k_add_interface, + .remove_interface = ath5k_remove_interface, + .config = ath5k_config, + .prepare_multicast = ath5k_prepare_multicast, + .configure_filter = ath5k_configure_filter, + .set_key = ath5k_set_key, + .get_stats = ath5k_get_stats, + .get_survey = ath5k_get_survey, + .conf_tx = ath5k_conf_tx, + .get_tsf = ath5k_get_tsf, + .set_tsf = ath5k_set_tsf, + .reset_tsf = ath5k_reset_tsf, + .bss_info_changed = ath5k_bss_info_changed, + .sw_scan_start = ath5k_sw_scan_start, + .sw_scan_complete = ath5k_sw_scan_complete, + .set_coverage_class = ath5k_set_coverage_class, +}; + +/********************\ +* PCI Initialization * +\********************/ + +static int __devinit +ath5k_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + void __iomem *mem; + struct ath5k_softc *sc; + struct ath_common *common; + struct ieee80211_hw *hw; + int ret; + u8 csz; + + /* + * L0s needs to be disabled on all ath5k cards. + * + * For distributions shipping with CONFIG_PCIEASPM (this will be enabled + * by default in the future in 2.6.36) this will also mean both L1 and + * L0s will be disabled when a pre 1.1 PCIe device is detected. We do + * know L1 works correctly even for all ath5k pre 1.1 PCIe devices + * though but cannot currently undue the effect of a blacklist, for + * details you can read pcie_aspm_sanity_check() and see how it adjusts + * the device link capability. + * + * It may be possible in the future to implement some PCI API to allow + * drivers to override blacklists for pre 1.1 PCIe but for now it is + * best to accept that both L0s and L1 will be disabled completely for + * distributions shipping with CONFIG_PCIEASPM rather than having this + * issue present. Motivation for adding this new API will be to help + * with power consumption for some of these devices. + */ + pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S); + + ret = pci_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "can't enable device\n"); + goto err; + } + + /* XXX 32-bit addressing only */ + ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (ret) { + dev_err(&pdev->dev, "32-bit DMA not available\n"); + goto err_dis; + } + + /* + * Cache line size is used to size and align various + * structures used to communicate with the hardware. + */ + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz); + if (csz == 0) { + /* + * Linux 2.4.18 (at least) writes the cache line size + * register as a 16-bit wide register which is wrong. + * We must have this setup properly for rx buffer + * DMA to work so force a reasonable value here if it + * comes up zero. + */ + csz = L1_CACHE_BYTES >> 2; + pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz); + } + /* + * The default setting of latency timer yields poor results, + * set it to the value used by other systems. It may be worth + * tweaking this setting more. + */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8); + + /* Enable bus mastering */ + pci_set_master(pdev); + + /* + * Disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state. + */ + pci_write_config_byte(pdev, 0x41, 0); + + ret = pci_request_region(pdev, 0, "ath5k"); + if (ret) { + dev_err(&pdev->dev, "cannot reserve PCI memory region\n"); + goto err_dis; + } + + mem = pci_iomap(pdev, 0, 0); + if (!mem) { + dev_err(&pdev->dev, "cannot remap PCI memory region\n") ; + ret = -EIO; + goto err_reg; + } + + /* + * Allocate hw (mac80211 main struct) + * and hw->priv (driver private data) + */ + hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops); + if (hw == NULL) { + dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n"); + ret = -ENOMEM; + goto err_map; + } + + dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy)); + + /* Initialize driver private data */ + SET_IEEE80211_DEV(hw, &pdev->dev); + hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_SIGNAL_DBM; + + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC) | + BIT(NL80211_IFTYPE_MESH_POINT); + + hw->extra_tx_headroom = 2; + hw->channel_change_time = 5000; + sc = hw->priv; + sc->hw = hw; + sc->pdev = pdev; + + /* + * Mark the device as detached to avoid processing + * interrupts until setup is complete. + */ + __set_bit(ATH_STAT_INVALID, sc->status); + + sc->iobase = mem; /* So we can unmap it on detach */ + sc->opmode = NL80211_IFTYPE_STATION; + sc->bintval = 1000; + mutex_init(&sc->lock); + spin_lock_init(&sc->rxbuflock); + spin_lock_init(&sc->txbuflock); + spin_lock_init(&sc->block); + + /* Set private data */ + pci_set_drvdata(pdev, sc); + + /* Setup interrupt handler */ + ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc); + if (ret) { + ATH5K_ERR(sc, "request_irq failed\n"); + goto err_free; + } + + /* If we passed the test, malloc an ath5k_hw struct */ + sc->ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL); + if (!sc->ah) { + ret = -ENOMEM; + ATH5K_ERR(sc, "out of memory\n"); + goto err_irq; + } + + sc->ah->ah_sc = sc; + sc->ah->ah_iobase = sc->iobase; + common = ath5k_hw_common(sc->ah); + common->ops = &ath5k_common_ops; + common->ah = sc->ah; + common->hw = hw; + common->cachelsz = csz << 2; /* convert to bytes */ + spin_lock_init(&common->cc_lock); + + /* Initialize device */ + ret = ath5k_hw_attach(sc); + if (ret) { + goto err_free_ah; + } + + /* set up multi-rate retry capabilities */ + if (sc->ah->ah_version == AR5K_AR5212) { + hw->max_rates = 4; + hw->max_rate_tries = 11; + } + + hw->vif_data_size = sizeof(struct ath5k_vif); + + /* Finish private driver data initialization */ + ret = ath5k_attach(pdev, hw); + if (ret) + goto err_ah; + + ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n", + ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev), + sc->ah->ah_mac_srev, + sc->ah->ah_phy_revision); + + if (!sc->ah->ah_single_chip) { + /* Single chip radio (!RF5111) */ + if (sc->ah->ah_radio_5ghz_revision && + !sc->ah->ah_radio_2ghz_revision) { + /* No 5GHz support -> report 2GHz radio */ + if (!test_bit(AR5K_MODE_11A, + sc->ah->ah_capabilities.cap_mode)) { + ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + sc->ah->ah_radio_5ghz_revision), + sc->ah->ah_radio_5ghz_revision); + /* No 2GHz support (5110 and some + * 5Ghz only cards) -> report 5Ghz radio */ + } else if (!test_bit(AR5K_MODE_11B, + sc->ah->ah_capabilities.cap_mode)) { + ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + sc->ah->ah_radio_5ghz_revision), + sc->ah->ah_radio_5ghz_revision); + /* Multiband radio */ + } else { + ATH5K_INFO(sc, "RF%s multiband radio found" + " (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + sc->ah->ah_radio_5ghz_revision), + sc->ah->ah_radio_5ghz_revision); + } + } + /* Multi chip radio (RF5111 - RF2111) -> + * report both 2GHz/5GHz radios */ + else if (sc->ah->ah_radio_5ghz_revision && + sc->ah->ah_radio_2ghz_revision){ + ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + sc->ah->ah_radio_5ghz_revision), + sc->ah->ah_radio_5ghz_revision); + ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + sc->ah->ah_radio_2ghz_revision), + sc->ah->ah_radio_2ghz_revision); + } + } + + ath5k_debug_init_device(sc); + + /* ready to process interrupts */ + __clear_bit(ATH_STAT_INVALID, sc->status); + + return 0; +err_ah: + ath5k_hw_detach(sc->ah); +err_free_ah: + kfree(sc->ah); +err_irq: + free_irq(pdev->irq, sc); +err_free: + ieee80211_free_hw(hw); +err_map: + pci_iounmap(pdev, mem); +err_reg: + pci_release_region(pdev, 0); +err_dis: + pci_disable_device(pdev); +err: + return ret; +} + +static void __devexit +ath5k_pci_remove(struct pci_dev *pdev) +{ + struct ath5k_softc *sc = pci_get_drvdata(pdev); + + ath5k_debug_finish_device(sc); + ath5k_detach(pdev, sc->hw); + ath5k_hw_detach(sc->ah); + kfree(sc->ah); + free_irq(pdev->irq, sc); + pci_iounmap(pdev, sc->iobase); + pci_release_region(pdev, 0); + pci_disable_device(pdev); + ieee80211_free_hw(sc->hw); +} + +#ifdef CONFIG_PM_SLEEP +static int ath5k_pci_suspend(struct device *dev) +{ + struct ath5k_softc *sc = pci_get_drvdata(to_pci_dev(dev)); + + ath5k_led_off(sc); + return 0; +} + +static int ath5k_pci_resume(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct ath5k_softc *sc = pci_get_drvdata(pdev); + + /* + * Suspend/Resume resets the PCI configuration space, so we have to + * re-disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state + */ + pci_write_config_byte(pdev, 0x41, 0); + + ath5k_led_enable(sc); + return 0; +} + +static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume); +#define ATH5K_PM_OPS (&ath5k_pm_ops) +#else +#define ATH5K_PM_OPS NULL +#endif /* CONFIG_PM_SLEEP */ + +static struct pci_driver ath5k_pci_driver = { + .name = KBUILD_MODNAME, + .id_table = ath5k_pci_id_table, + .probe = ath5k_pci_probe, + .remove = __devexit_p(ath5k_pci_remove), + .driver.pm = ATH5K_PM_OPS, +}; + +/* + * Module init/exit functions + */ +static int __init +init_ath5k_pci(void) +{ + int ret; + + ret = pci_register_driver(&ath5k_pci_driver); + if (ret) { + printk(KERN_ERR "ath5k_pci: can't register pci driver\n"); + return ret; + } + + return 0; +} + +static void __exit +exit_ath5k_pci(void) +{ + pci_unregister_driver(&ath5k_pci_driver); +} + +module_init(init_ath5k_pci); +module_exit(exit_ath5k_pci); |