summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/wl12xx/wl1251_io.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/wl12xx/wl1251_io.c')
-rw-r--r--drivers/net/wireless/wl12xx/wl1251_io.c196
1 files changed, 0 insertions, 196 deletions
diff --git a/drivers/net/wireless/wl12xx/wl1251_io.c b/drivers/net/wireless/wl12xx/wl1251_io.c
deleted file mode 100644
index f1c232e0887f..000000000000
--- a/drivers/net/wireless/wl12xx/wl1251_io.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (C) 2008 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include "wl1251.h"
-#include "wl1251_reg.h"
-#include "wl1251_io.h"
-
-/* FIXME: this is static data nowadays and the table can be removed */
-static enum wl12xx_acx_int_reg wl1251_io_reg_table[ACX_REG_TABLE_LEN] = {
- [ACX_REG_INTERRUPT_TRIG] = (REGISTERS_BASE + 0x0474),
- [ACX_REG_INTERRUPT_TRIG_H] = (REGISTERS_BASE + 0x0478),
- [ACX_REG_INTERRUPT_MASK] = (REGISTERS_BASE + 0x0494),
- [ACX_REG_HINT_MASK_SET] = (REGISTERS_BASE + 0x0498),
- [ACX_REG_HINT_MASK_CLR] = (REGISTERS_BASE + 0x049C),
- [ACX_REG_INTERRUPT_NO_CLEAR] = (REGISTERS_BASE + 0x04B0),
- [ACX_REG_INTERRUPT_CLEAR] = (REGISTERS_BASE + 0x04A4),
- [ACX_REG_INTERRUPT_ACK] = (REGISTERS_BASE + 0x04A8),
- [ACX_REG_SLV_SOFT_RESET] = (REGISTERS_BASE + 0x0000),
- [ACX_REG_EE_START] = (REGISTERS_BASE + 0x080C),
- [ACX_REG_ECPU_CONTROL] = (REGISTERS_BASE + 0x0804)
-};
-
-static int wl1251_translate_reg_addr(struct wl1251 *wl, int addr)
-{
- /* If the address is lower than REGISTERS_BASE, it means that this is
- * a chip-specific register address, so look it up in the registers
- * table */
- if (addr < REGISTERS_BASE) {
- /* Make sure we don't go over the table */
- if (addr >= ACX_REG_TABLE_LEN) {
- wl1251_error("address out of range (%d)", addr);
- return -EINVAL;
- }
- addr = wl1251_io_reg_table[addr];
- }
-
- return addr - wl->physical_reg_addr + wl->virtual_reg_addr;
-}
-
-static int wl1251_translate_mem_addr(struct wl1251 *wl, int addr)
-{
- return addr - wl->physical_mem_addr + wl->virtual_mem_addr;
-}
-
-void wl1251_mem_read(struct wl1251 *wl, int addr, void *buf, size_t len)
-{
- int physical;
-
- physical = wl1251_translate_mem_addr(wl, addr);
-
- wl->if_ops->read(wl, physical, buf, len);
-}
-
-void wl1251_mem_write(struct wl1251 *wl, int addr, void *buf, size_t len)
-{
- int physical;
-
- physical = wl1251_translate_mem_addr(wl, addr);
-
- wl->if_ops->write(wl, physical, buf, len);
-}
-
-u32 wl1251_mem_read32(struct wl1251 *wl, int addr)
-{
- return wl1251_read32(wl, wl1251_translate_mem_addr(wl, addr));
-}
-
-void wl1251_mem_write32(struct wl1251 *wl, int addr, u32 val)
-{
- wl1251_write32(wl, wl1251_translate_mem_addr(wl, addr), val);
-}
-
-u32 wl1251_reg_read32(struct wl1251 *wl, int addr)
-{
- return wl1251_read32(wl, wl1251_translate_reg_addr(wl, addr));
-}
-
-void wl1251_reg_write32(struct wl1251 *wl, int addr, u32 val)
-{
- wl1251_write32(wl, wl1251_translate_reg_addr(wl, addr), val);
-}
-
-/* Set the partitions to access the chip addresses.
- *
- * There are two VIRTUAL partitions (the memory partition and the
- * registers partition), which are mapped to two different areas of the
- * PHYSICAL (hardware) memory. This function also makes other checks to
- * ensure that the partitions are not overlapping. In the diagram below, the
- * memory partition comes before the register partition, but the opposite is
- * also supported.
- *
- * PHYSICAL address
- * space
- *
- * | |
- * ...+----+--> mem_start
- * VIRTUAL address ... | |
- * space ... | | [PART_0]
- * ... | |
- * 0x00000000 <--+----+... ...+----+--> mem_start + mem_size
- * | | ... | |
- * |MEM | ... | |
- * | | ... | |
- * part_size <--+----+... | | {unused area)
- * | | ... | |
- * |REG | ... | |
- * part_size | | ... | |
- * + <--+----+... ...+----+--> reg_start
- * reg_size ... | |
- * ... | | [PART_1]
- * ... | |
- * ...+----+--> reg_start + reg_size
- * | |
- *
- */
-void wl1251_set_partition(struct wl1251 *wl,
- u32 mem_start, u32 mem_size,
- u32 reg_start, u32 reg_size)
-{
- struct wl1251_partition partition[2];
-
- wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
- mem_start, mem_size);
- wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
- reg_start, reg_size);
-
- /* Make sure that the two partitions together don't exceed the
- * address range */
- if ((mem_size + reg_size) > HW_ACCESS_MEMORY_MAX_RANGE) {
- wl1251_debug(DEBUG_SPI, "Total size exceeds maximum virtual"
- " address range. Truncating partition[0].");
- mem_size = HW_ACCESS_MEMORY_MAX_RANGE - reg_size;
- wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
- mem_start, mem_size);
- wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
- reg_start, reg_size);
- }
-
- if ((mem_start < reg_start) &&
- ((mem_start + mem_size) > reg_start)) {
- /* Guarantee that the memory partition doesn't overlap the
- * registers partition */
- wl1251_debug(DEBUG_SPI, "End of partition[0] is "
- "overlapping partition[1]. Adjusted.");
- mem_size = reg_start - mem_start;
- wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
- mem_start, mem_size);
- wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
- reg_start, reg_size);
- } else if ((reg_start < mem_start) &&
- ((reg_start + reg_size) > mem_start)) {
- /* Guarantee that the register partition doesn't overlap the
- * memory partition */
- wl1251_debug(DEBUG_SPI, "End of partition[1] is"
- " overlapping partition[0]. Adjusted.");
- reg_size = mem_start - reg_start;
- wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
- mem_start, mem_size);
- wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
- reg_start, reg_size);
- }
-
- partition[0].start = mem_start;
- partition[0].size = mem_size;
- partition[1].start = reg_start;
- partition[1].size = reg_size;
-
- wl->physical_mem_addr = mem_start;
- wl->physical_reg_addr = reg_start;
-
- wl->virtual_mem_addr = 0;
- wl->virtual_reg_addr = mem_size;
-
- wl->if_ops->write(wl, HW_ACCESS_PART0_SIZE_ADDR, partition,
- sizeof(partition));
-}