diff options
Diffstat (limited to 'drivers/net/wireless/wl12xx/wl1251_tx.h')
| -rw-r--r-- | drivers/net/wireless/wl12xx/wl1251_tx.h | 233 |
1 files changed, 0 insertions, 233 deletions
diff --git a/drivers/net/wireless/wl12xx/wl1251_tx.h b/drivers/net/wireless/wl12xx/wl1251_tx.h deleted file mode 100644 index 55856c6bb97a..000000000000 --- a/drivers/net/wireless/wl12xx/wl1251_tx.h +++ /dev/null @@ -1,233 +0,0 @@ -/* - * This file is part of wl1251 - * - * Copyright (c) 1998-2007 Texas Instruments Incorporated - * Copyright (C) 2008 Nokia Corporation - * - * Contact: Kalle Valo <kalle.valo@nokia.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __WL1251_TX_H__ -#define __WL1251_TX_H__ - -#include <linux/bitops.h> -#include "wl1251_acx.h" - -/* - * - * TX PATH - * - * The Tx path uses a double buffer and a tx_control structure, each located - * at a fixed address in the device's memory. On startup, the host retrieves - * the pointers to these addresses. A double buffer allows for continuous data - * flow towards the device. The host keeps track of which buffer is available - * and alternates between these two buffers on a per packet basis. - * - * The size of each of the two buffers is large enough to hold the longest - * 802.3 packet - maximum size Ethernet packet + header + descriptor. - * TX complete indication will be received a-synchronously in a TX done cyclic - * buffer which is composed of 16 tx_result descriptors structures and is used - * in a cyclic manner. - * - * The TX (HOST) procedure is as follows: - * 1. Read the Tx path status, that will give the data_out_count. - * 2. goto 1, if not possible. - * i.e. if data_in_count - data_out_count >= HwBuffer size (2 for double - * buffer). - * 3. Copy the packet (preceded by double_buffer_desc), if possible. - * i.e. if data_in_count - data_out_count < HwBuffer size (2 for double - * buffer). - * 4. increment data_in_count. - * 5. Inform the firmware by generating a firmware internal interrupt. - * 6. FW will increment data_out_count after it reads the buffer. - * - * The TX Complete procedure: - * 1. To get a TX complete indication the host enables the tx_complete flag in - * the TX descriptor Structure. - * 2. For each packet with a Tx Complete field set, the firmware adds the - * transmit results to the cyclic buffer (txDoneRing) and sets both done_1 - * and done_2 to 1 to indicate driver ownership. - * 3. The firmware sends a Tx Complete interrupt to the host to trigger the - * host to process the new data. Note: interrupt will be send per packet if - * TX complete indication was requested in tx_control or per crossing - * aggregation threshold. - * 4. After receiving the Tx Complete interrupt, the host reads the - * TxDescriptorDone information in a cyclic manner and clears both done_1 - * and done_2 fields. - * - */ - -#define TX_COMPLETE_REQUIRED_BIT 0x80 -#define TX_STATUS_DATA_OUT_COUNT_MASK 0xf - -#define WL1251_TX_ALIGN_TO 4 -#define WL1251_TX_ALIGN(len) (((len) + WL1251_TX_ALIGN_TO - 1) & \ - ~(WL1251_TX_ALIGN_TO - 1)) -#define WL1251_TKIP_IV_SPACE 4 - -struct tx_control { - /* Rate Policy (class) index */ - unsigned rate_policy:3; - - /* When set, no ack policy is expected */ - unsigned ack_policy:1; - - /* - * Packet type: - * 0 -> 802.11 - * 1 -> 802.3 - * 2 -> IP - * 3 -> raw codec - */ - unsigned packet_type:2; - - /* If set, this is a QoS-Null or QoS-Data frame */ - unsigned qos:1; - - /* - * If set, the target triggers the tx complete INT - * upon frame sending completion. - */ - unsigned tx_complete:1; - - /* 2 bytes padding before packet header */ - unsigned xfer_pad:1; - - unsigned reserved:7; -} __attribute__ ((packed)); - - -struct tx_double_buffer_desc { - /* Length of payload, including headers. */ - u16 length; - - /* - * A bit mask that specifies the initial rate to be used - * Possible values are: - * 0x0001 - 1Mbits - * 0x0002 - 2Mbits - * 0x0004 - 5.5Mbits - * 0x0008 - 6Mbits - * 0x0010 - 9Mbits - * 0x0020 - 11Mbits - * 0x0040 - 12Mbits - * 0x0080 - 18Mbits - * 0x0100 - 22Mbits - * 0x0200 - 24Mbits - * 0x0400 - 36Mbits - * 0x0800 - 48Mbits - * 0x1000 - 54Mbits - */ - u16 rate; - - /* Time in us that a packet can spend in the target */ - u32 expiry_time; - - /* index of the TX queue used for this packet */ - u8 xmit_queue; - - /* Used to identify a packet */ - u8 id; - - struct tx_control control; - - /* - * The FW should cut the packet into fragments - * of this size. - */ - u16 frag_threshold; - - /* Numbers of HW queue blocks to be allocated */ - u8 num_mem_blocks; - - u8 reserved; -} __attribute__ ((packed)); - -enum { - TX_SUCCESS = 0, - TX_DMA_ERROR = BIT(7), - TX_DISABLED = BIT(6), - TX_RETRY_EXCEEDED = BIT(5), - TX_TIMEOUT = BIT(4), - TX_KEY_NOT_FOUND = BIT(3), - TX_ENCRYPT_FAIL = BIT(2), - TX_UNAVAILABLE_PRIORITY = BIT(1), -}; - -struct tx_result { - /* - * Ownership synchronization between the host and - * the firmware. If done_1 and done_2 are cleared, - * owned by the FW (no info ready). - */ - u8 done_1; - - /* same as double_buffer_desc->id */ - u8 id; - - /* - * Total air access duration consumed by this - * packet, including all retries and overheads. - */ - u16 medium_usage; - - /* Total media delay (from 1st EDCA AIFS counter until TX Complete). */ - u32 medium_delay; - - /* Time between host xfer and tx complete */ - u32 fw_hnadling_time; - - /* The LS-byte of the last TKIP sequence number. */ - u8 lsb_seq_num; - - /* Retry count */ - u8 ack_failures; - - /* At which rate we got a ACK */ - u16 rate; - - u16 reserved; - - /* TX_* */ - u8 status; - - /* See done_1 */ - u8 done_2; -} __attribute__ ((packed)); - -static inline int wl1251_tx_get_queue(int queue) -{ - switch (queue) { - case 0: - return QOS_AC_VO; - case 1: - return QOS_AC_VI; - case 2: - return QOS_AC_BE; - case 3: - return QOS_AC_BK; - default: - return QOS_AC_BE; - } -} - -void wl1251_tx_work(struct work_struct *work); -void wl1251_tx_complete(struct wl1251 *wl); -void wl1251_tx_flush(struct wl1251 *wl); - -#endif |