summaryrefslogtreecommitdiffstats
path: root/drivers/pci/hotplug/shpchp_ctrl.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/hotplug/shpchp_ctrl.c')
-rw-r--r--drivers/pci/hotplug/shpchp_ctrl.c2848
1 files changed, 2848 insertions, 0 deletions
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
new file mode 100644
index 000000000000..9f90eb8e6ecd
--- /dev/null
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -0,0 +1,2848 @@
+/*
+ * Standard Hot Plug Controller Driver
+ *
+ * Copyright (C) 1995,2001 Compaq Computer Corporation
+ * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2001 IBM Corp.
+ * Copyright (C) 2003-2004 Intel Corporation
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#include <linux/smp_lock.h>
+#include <linux/pci.h>
+#include "shpchp.h"
+#include "shpchprm.h"
+
+static u32 configure_new_device(struct controller *ctrl, struct pci_func *func,
+ u8 behind_bridge, struct resource_lists *resources, u8 bridge_bus, u8 bridge_dev);
+static int configure_new_function( struct controller *ctrl, struct pci_func *func,
+ u8 behind_bridge, struct resource_lists *resources, u8 bridge_bus, u8 bridge_dev);
+static void interrupt_event_handler(struct controller *ctrl);
+
+static struct semaphore event_semaphore; /* mutex for process loop (up if something to process) */
+static struct semaphore event_exit; /* guard ensure thread has exited before calling it quits */
+static int event_finished;
+static unsigned long pushbutton_pending; /* = 0 */
+
+u8 shpchp_disk_irq;
+u8 shpchp_nic_irq;
+
+u8 shpchp_handle_attention_button(u8 hp_slot, void *inst_id)
+{
+ struct controller *ctrl = (struct controller *) inst_id;
+ struct slot *p_slot;
+ u8 rc = 0;
+ u8 getstatus;
+ struct pci_func *func;
+ struct event_info *taskInfo;
+
+ /* Attention Button Change */
+ dbg("shpchp: Attention button interrupt received.\n");
+
+ func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
+
+ /* This is the structure that tells the worker thread what to do */
+ taskInfo = &(ctrl->event_queue[ctrl->next_event]);
+ p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
+
+ p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
+ p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+
+ ctrl->next_event = (ctrl->next_event + 1) % 10;
+ taskInfo->hp_slot = hp_slot;
+
+ rc++;
+
+ /*
+ * Button pressed - See if need to TAKE ACTION!!!
+ */
+ info("Button pressed on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ taskInfo->event_type = INT_BUTTON_PRESS;
+
+ if ((p_slot->state == BLINKINGON_STATE)
+ || (p_slot->state == BLINKINGOFF_STATE)) {
+ /* Cancel if we are still blinking; this means that we press the
+ * attention again before the 5 sec. limit expires to cancel hot-add
+ * or hot-remove
+ */
+ taskInfo->event_type = INT_BUTTON_CANCEL;
+ info("Button cancel on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ } else if ((p_slot->state == POWERON_STATE)
+ || (p_slot->state == POWEROFF_STATE)) {
+ /* Ignore if the slot is on power-on or power-off state; this
+ * means that the previous attention button action to hot-add or
+ * hot-remove is undergoing
+ */
+ taskInfo->event_type = INT_BUTTON_IGNORE;
+ info("Button ignore on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ }
+
+ if (rc)
+ up(&event_semaphore); /* signal event thread that new event is posted */
+
+ return 0;
+
+}
+
+u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id)
+{
+ struct controller *ctrl = (struct controller *) inst_id;
+ struct slot *p_slot;
+ u8 rc = 0;
+ u8 getstatus;
+ struct pci_func *func;
+ struct event_info *taskInfo;
+
+ /* Switch Change */
+ dbg("shpchp: Switch interrupt received.\n");
+
+ func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
+
+ /* This is the structure that tells the worker thread
+ * what to do
+ */
+ taskInfo = &(ctrl->event_queue[ctrl->next_event]);
+ ctrl->next_event = (ctrl->next_event + 1) % 10;
+ taskInfo->hp_slot = hp_slot;
+
+ rc++;
+ p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
+ p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
+ p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+ dbg("%s: Card present %x Power status %x\n", __FUNCTION__,
+ func->presence_save, func->pwr_save);
+
+ if (getstatus) {
+ /*
+ * Switch opened
+ */
+ info("Latch open on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ func->switch_save = 0;
+ taskInfo->event_type = INT_SWITCH_OPEN;
+ if (func->pwr_save && func->presence_save) {
+ taskInfo->event_type = INT_POWER_FAULT;
+ err("Surprise Removal of card\n");
+ }
+ } else {
+ /*
+ * Switch closed
+ */
+ info("Latch close on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ func->switch_save = 0x10;
+ taskInfo->event_type = INT_SWITCH_CLOSE;
+ }
+
+ if (rc)
+ up(&event_semaphore); /* signal event thread that new event is posted */
+
+ return rc;
+}
+
+u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id)
+{
+ struct controller *ctrl = (struct controller *) inst_id;
+ struct slot *p_slot;
+ u8 rc = 0;
+ /*u8 temp_byte;*/
+ struct pci_func *func;
+ struct event_info *taskInfo;
+
+ /* Presence Change */
+ dbg("shpchp: Presence/Notify input change.\n");
+
+ func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
+
+ /* This is the structure that tells the worker thread
+ * what to do
+ */
+ taskInfo = &(ctrl->event_queue[ctrl->next_event]);
+ ctrl->next_event = (ctrl->next_event + 1) % 10;
+ taskInfo->hp_slot = hp_slot;
+
+ rc++;
+ p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
+
+ /*
+ * Save the presence state
+ */
+ p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
+ if (func->presence_save) {
+ /*
+ * Card Present
+ */
+ info("Card present on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ taskInfo->event_type = INT_PRESENCE_ON;
+ } else {
+ /*
+ * Not Present
+ */
+ info("Card not present on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ taskInfo->event_type = INT_PRESENCE_OFF;
+ }
+
+ if (rc)
+ up(&event_semaphore); /* signal event thread that new event is posted */
+
+ return rc;
+}
+
+u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id)
+{
+ struct controller *ctrl = (struct controller *) inst_id;
+ struct slot *p_slot;
+ u8 rc = 0;
+ struct pci_func *func;
+ struct event_info *taskInfo;
+
+ /* Power fault */
+ dbg("shpchp: Power fault interrupt received.\n");
+
+ func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
+
+ /* This is the structure that tells the worker thread
+ * what to do
+ */
+ taskInfo = &(ctrl->event_queue[ctrl->next_event]);
+ ctrl->next_event = (ctrl->next_event + 1) % 10;
+ taskInfo->hp_slot = hp_slot;
+
+ rc++;
+ p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
+
+ if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) {
+ /*
+ * Power fault Cleared
+ */
+ info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ func->status = 0x00;
+ taskInfo->event_type = INT_POWER_FAULT_CLEAR;
+ } else {
+ /*
+ * Power fault
+ */
+ info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ taskInfo->event_type = INT_POWER_FAULT;
+ /* set power fault status for this board */
+ func->status = 0xFF;
+ info("power fault bit %x set\n", hp_slot);
+ }
+ if (rc)
+ up(&event_semaphore); /* signal event thread that new event is posted */
+
+ return rc;
+}
+
+
+/*
+ * sort_by_size
+ *
+ * Sorts nodes on the list by their length.
+ * Smallest first.
+ *
+ */
+static int sort_by_size(struct pci_resource **head)
+{
+ struct pci_resource *current_res;
+ struct pci_resource *next_res;
+ int out_of_order = 1;
+
+ if (!(*head))
+ return(1);
+
+ if (!((*head)->next))
+ return(0);
+
+ while (out_of_order) {
+ out_of_order = 0;
+
+ /* Special case for swapping list head */
+ if (((*head)->next) &&
+ ((*head)->length > (*head)->next->length)) {
+ out_of_order++;
+ current_res = *head;
+ *head = (*head)->next;
+ current_res->next = (*head)->next;
+ (*head)->next = current_res;
+ }
+
+ current_res = *head;
+
+ while (current_res->next && current_res->next->next) {
+ if (current_res->next->length > current_res->next->next->length) {
+ out_of_order++;
+ next_res = current_res->next;
+ current_res->next = current_res->next->next;
+ current_res = current_res->next;
+ next_res->next = current_res->next;
+ current_res->next = next_res;
+ } else
+ current_res = current_res->next;
+ }
+ } /* End of out_of_order loop */
+
+ return(0);
+}
+
+
+/*
+ * sort_by_max_size
+ *
+ * Sorts nodes on the list by their length.
+ * Largest first.
+ *
+ */
+static int sort_by_max_size(struct pci_resource **head)
+{
+ struct pci_resource *current_res;
+ struct pci_resource *next_res;
+ int out_of_order = 1;
+
+ if (!(*head))
+ return(1);
+
+ if (!((*head)->next))
+ return(0);
+
+ while (out_of_order) {
+ out_of_order = 0;
+
+ /* Special case for swapping list head */
+ if (((*head)->next) &&
+ ((*head)->length < (*head)->next->length)) {
+ out_of_order++;
+ current_res = *head;
+ *head = (*head)->next;
+ current_res->next = (*head)->next;
+ (*head)->next = current_res;
+ }
+
+ current_res = *head;
+
+ while (current_res->next && current_res->next->next) {
+ if (current_res->next->length < current_res->next->next->length) {
+ out_of_order++;
+ next_res = current_res->next;
+ current_res->next = current_res->next->next;
+ current_res = current_res->next;
+ next_res->next = current_res->next;
+ current_res->next = next_res;
+ } else
+ current_res = current_res->next;
+ }
+ } /* End of out_of_order loop */
+
+ return(0);
+}
+
+
+/*
+ * do_pre_bridge_resource_split
+ *
+ * Returns zero or one node of resources that aren't in use
+ *
+ */
+static struct pci_resource *do_pre_bridge_resource_split (struct pci_resource **head, struct pci_resource **orig_head, u32 alignment)
+{
+ struct pci_resource *prevnode = NULL;
+ struct pci_resource *node;
+ struct pci_resource *split_node;
+ u32 rc;
+ u32 temp_dword;
+ dbg("do_pre_bridge_resource_split\n");
+
+ if (!(*head) || !(*orig_head))
+ return(NULL);
+
+ rc = shpchp_resource_sort_and_combine(head);
+
+ if (rc)
+ return(NULL);
+
+ if ((*head)->base != (*orig_head)->base)
+ return(NULL);
+
+ if ((*head)->length == (*orig_head)->length)
+ return(NULL);
+
+
+ /* If we got here, there the bridge requires some of the resource, but
+ * we may be able to split some off of the front
+ */
+ node = *head;
+
+ if (node->length & (alignment -1)) {
+ /* This one isn't an aligned length, so we'll make a new entry
+ * and split it up.
+ */
+ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
+
+ if (!split_node)
+ return(NULL);
+
+ temp_dword = (node->length | (alignment-1)) + 1 - alignment;
+
+ split_node->base = node->base;
+ split_node->length = temp_dword;
+
+ node->length -= temp_dword;
+ node->base += split_node->length;
+
+ /* Put it in the list */
+ *head = split_node;
+ split_node->next = node;
+ }
+
+ if (node->length < alignment) {
+ return(NULL);
+ }
+
+ /* Now unlink it */
+ if (*head == node) {
+ *head = node->next;
+ node->next = NULL;
+ } else {
+ prevnode = *head;
+ while (prevnode->next != node)
+ prevnode = prevnode->next;
+
+ prevnode->next = node->next;
+ node->next = NULL;
+ }
+
+ return(node);
+}
+
+
+/*
+ * do_bridge_resource_split
+ *
+ * Returns zero or one node of resources that aren't in use
+ *
+ */
+static struct pci_resource *do_bridge_resource_split (struct pci_resource **head, u32 alignment)
+{
+ struct pci_resource *prevnode = NULL;
+ struct pci_resource *node;
+ u32 rc;
+ u32 temp_dword;
+
+ if (!(*head))
+ return(NULL);
+
+ rc = shpchp_resource_sort_and_combine(head);
+
+ if (rc)
+ return(NULL);
+
+ node = *head;
+
+ while (node->next) {
+ prevnode = node;
+ node = node->next;
+ kfree(prevnode);
+ }
+
+ if (node->length < alignment) {
+ kfree(node);
+ return(NULL);
+ }
+
+ if (node->base & (alignment - 1)) {
+ /* Short circuit if adjusted size is too small */
+ temp_dword = (node->base | (alignment-1)) + 1;
+ if ((node->length - (temp_dword - node->base)) < alignment) {
+ kfree(node);
+ return(NULL);
+ }
+
+ node->length -= (temp_dword - node->base);
+ node->base = temp_dword;
+ }
+
+ if (node->length & (alignment - 1)) {
+ /* There's stuff in use after this node */
+ kfree(node);
+ return(NULL);
+ }
+
+ return(node);
+}
+
+
+/*
+ * get_io_resource
+ *
+ * this function sorts the resource list by size and then
+ * returns the first node of "size" length that is not in the
+ * ISA aliasing window. If it finds a node larger than "size"
+ * it will split it up.
+ *
+ * size must be a power of two.
+ */
+static struct pci_resource *get_io_resource (struct pci_resource **head, u32 size)
+{
+ struct pci_resource *prevnode;
+ struct pci_resource *node;
+ struct pci_resource *split_node = NULL;
+ u32 temp_dword;
+
+ if (!(*head))
+ return(NULL);
+
+ if ( shpchp_resource_sort_and_combine(head) )
+ return(NULL);
+
+ if ( sort_by_size(head) )
+ return(NULL);
+
+ for (node = *head; node; node = node->next) {
+ if (node->length < size)
+ continue;
+
+ if (node->base & (size - 1)) {
+ /* This one isn't base aligned properly
+ so we'll make a new entry and split it up */
+ temp_dword = (node->base | (size-1)) + 1;
+
+ /*/ Short circuit if adjusted size is too small */
+ if ((node->length - (temp_dword - node->base)) < size)
+ continue;
+
+ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
+
+ if (!split_node)
+ return(NULL);
+
+ split_node->base = node->base;
+ split_node->length = temp_dword - node->base;
+ node->base = temp_dword;
+ node->length -= split_node->length;
+
+ /* Put it in the list */
+ split_node->next = node->next;
+ node->next = split_node;
+ } /* End of non-aligned base */
+
+ /* Don't need to check if too small since we already did */
+ if (node->length > size) {
+ /* This one is longer than we need
+ so we'll make a new entry and split it up */
+ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
+
+ if (!split_node)
+ return(NULL);
+
+ split_node->base = node->base + size;
+ split_node->length = node->length - size;
+ node->length = size;
+
+ /* Put it in the list */
+ split_node->next = node->next;
+ node->next = split_node;
+ } /* End of too big on top end */
+
+ /* For IO make sure it's not in the ISA aliasing space */
+ if (node->base & 0x300L)
+ continue;
+
+ /* If we got here, then it is the right size
+ Now take it out of the list */
+ if (*head == node) {
+ *head = node->next;
+ } else {
+ prevnode = *head;
+ while (prevnode->next != node)
+ prevnode = prevnode->next;
+
+ prevnode->next = node->next;
+ }
+ node->next = NULL;
+ /* Stop looping */
+ break;
+ }
+
+ return(node);
+}
+
+
+/*
+ * get_max_resource
+ *
+ * Gets the largest node that is at least "size" big from the
+ * list pointed to by head. It aligns the node on top and bottom
+ * to "size" alignment before returning it.
+ * J.I. modified to put max size limits of; 64M->32M->16M->8M->4M->1M
+ * This is needed to avoid allocating entire ACPI _CRS res to one child bridge/slot.
+ */
+static struct pci_resource *get_max_resource (struct pci_resource **head, u32 size)
+{
+ struct pci_resource *max;
+ struct pci_resource *temp;
+ struct pci_resource *split_node;
+ u32 temp_dword;
+ u32 max_size[] = { 0x4000000, 0x2000000, 0x1000000, 0x0800000, 0x0400000, 0x0200000, 0x0100000, 0x00 };
+ int i;
+
+ if (!(*head))
+ return(NULL);
+
+ if (shpchp_resource_sort_and_combine(head))
+ return(NULL);
+
+ if (sort_by_max_size(head))
+ return(NULL);
+
+ for (max = *head;max; max = max->next) {
+
+ /* If not big enough we could probably just bail,
+ instead we'll continue to the next. */
+ if (max->length < size)
+ continue;
+
+ if (max->base & (size - 1)) {
+ /* This one isn't base aligned properly
+ so we'll make a new entry and split it up */
+ temp_dword = (max->base | (size-1)) + 1;
+
+ /* Short circuit if adjusted size is too small */
+ if ((max->length - (temp_dword - max->base)) < size)
+ continue;
+
+ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
+
+ if (!split_node)
+ return(NULL);
+
+ split_node->base = max->base;
+ split_node->length = temp_dword - max->base;
+ max->base = temp_dword;
+ max->length -= split_node->length;
+
+ /* Put it next in the list */
+ split_node->next = max->next;
+ max->next = split_node;
+ }
+
+ if ((max->base + max->length) & (size - 1)) {
+ /* This one isn't end aligned properly at the top
+ so we'll make a new entry and split it up */
+ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
+
+ if (!split_node)
+ return(NULL);
+ temp_dword = ((max->base + max->length) & ~(size - 1));
+ split_node->base = temp_dword;
+ split_node->length = max->length + max->base
+ - split_node->base;
+ max->length -= split_node->length;
+
+ /* Put it in the list */
+ split_node->next = max->next;
+ max->next = split_node;
+ }
+
+ /* Make sure it didn't shrink too much when we aligned it */
+ if (max->length < size)
+ continue;
+
+ for ( i = 0; max_size[i] > size; i++) {
+ if (max->length > max_size[i]) {
+ split_node = kmalloc(sizeof(*split_node),
+ GFP_KERNEL);
+ if (!split_node)
+ break; /* return (NULL); */
+ split_node->base = max->base + max_size[i];
+ split_node->length = max->length - max_size[i];
+ max->length = max_size[i];
+ /* Put it next in the list */
+ split_node->next = max->next;
+ max->next = split_node;
+ break;
+ }
+ }
+
+ /* Now take it out of the list */
+ temp = (struct pci_resource*) *head;
+ if (temp == max) {
+ *head = max->next;
+ } else {
+ while (temp && temp->next != max) {
+ temp = temp->next;
+ }
+
+ temp->next = max->next;
+ }
+
+ max->next = NULL;
+ return(max);
+ }
+
+ /* If we get here, we couldn't find one */
+ return(NULL);
+}
+
+
+/*
+ * get_resource
+ *
+ * this function sorts the resource list by size and then
+ * returns the first node of "size" length. If it finds a node
+ * larger than "size" it will split it up.
+ *
+ * size must be a power of two.
+ */
+static struct pci_resource *get_resource (struct pci_resource **head, u32 size)
+{
+ struct pci_resource *prevnode;
+ struct pci_resource *node;
+ struct pci_resource *split_node;
+ u32 temp_dword;
+
+ if (!(*head))
+ return(NULL);
+
+ if ( shpchp_resource_sort_and_combine(head) )
+ return(NULL);
+
+ if ( sort_by_size(head) )
+ return(NULL);
+
+ for (node = *head; node; node = node->next) {
+ dbg("%s: req_size =0x%x node=%p, base=0x%x, length=0x%x\n",
+ __FUNCTION__, size, node, node->base, node->length);
+ if (node->length < size)
+ continue;
+
+ if (node->base & (size - 1)) {
+ dbg("%s: not aligned\n", __FUNCTION__);
+ /* this one isn't base aligned properly
+ so we'll make a new entry and split it up */
+ temp_dword = (node->base | (size-1)) + 1;
+
+ /* Short circuit if adjusted size is too small */
+ if ((node->length - (temp_dword - node->base)) < size)
+ continue;
+
+ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
+
+ if (!split_node)
+ return(NULL);
+
+ split_node->base = node->base;
+ split_node->length = temp_dword - node->base;
+ node->base = temp_dword;
+ node->length -= split_node->length;
+
+ /* Put it in the list */
+ split_node->next = node->next;
+ node->next = split_node;
+ } /* End of non-aligned base */
+
+ /* Don't need to check if too small since we already did */
+ if (node->length > size) {
+ dbg("%s: too big\n", __FUNCTION__);
+ /* this one is longer than we need
+ so we'll make a new entry and split it up */
+ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
+
+ if (!split_node)
+ return(NULL);
+
+ split_node->base = node->base + size;
+ split_node->length = node->length - size;
+ node->length = size;
+
+ /* Put it in the list */
+ split_node->next = node->next;
+ node->next = split_node;
+ } /* End of too big on top end */
+
+ dbg("%s: got one!!!\n", __FUNCTION__);
+ /* If we got here, then it is the right size
+ Now take it out of the list */
+ if (*head == node) {
+ *head = node->next;
+ } else {
+ prevnode = *head;
+ while (prevnode->next != node)
+ prevnode = prevnode->next;
+
+ prevnode->next = node->next;
+ }
+ node->next = NULL;
+ /* Stop looping */
+ break;
+ }
+ return(node);
+}
+
+
+/*
+ * shpchp_resource_sort_and_combine
+ *
+ * Sorts all of the nodes in the list in ascending order by
+ * their base addresses. Also does garbage collection by
+ * combining adjacent nodes.
+ *
+ * returns 0 if success
+ */
+int shpchp_resource_sort_and_combine(struct pci_resource **head)
+{
+ struct pci_resource *node1;
+ struct pci_resource *node2;
+ int out_of_order = 1;
+
+ dbg("%s: head = %p, *head = %p\n", __FUNCTION__, head, *head);
+
+ if (!(*head))
+ return(1);
+
+ dbg("*head->next = %p\n",(*head)->next);
+
+ if (!(*head)->next)
+ return(0); /* only one item on the list, already sorted! */
+
+ dbg("*head->base = 0x%x\n",(*head)->base);
+ dbg("*head->next->base = 0x%x\n",(*head)->next->base);
+ while (out_of_order) {
+ out_of_order = 0;
+
+ /* Special case for swapping list head */
+ if (((*head)->next) &&
+ ((*head)->base > (*head)->next->base)) {
+ node1 = *head;
+ (*head) = (*head)->next;
+ node1->next = (*head)->next;
+ (*head)->next = node1;
+ out_of_order++;
+ }
+
+ node1 = (*head);
+
+ while (node1->next && node1->next->next) {
+ if (node1->next->base > node1->next->next->base) {
+ out_of_order++;
+ node2 = node1->next;
+ node1->next = node1->next->next;
+ node1 = node1->next;
+ node2->next = node1->next;
+ node1->next = node2;
+ } else
+ node1 = node1->next;
+ }
+ } /* End of out_of_order loop */
+
+ node1 = *head;
+
+ while (node1 && node1->next) {
+ if ((node1->base + node1->length) == node1->next->base) {
+ /* Combine */
+ dbg("8..\n");
+ node1->length += node1->next->length;
+ node2 = node1->next;
+ node1->next = node1->next->next;
+ kfree(node2);
+ } else
+ node1 = node1->next;
+ }
+
+ return(0);
+}
+
+
+/**
+ * shpchp_slot_create - Creates a node and adds it to the proper bus.
+ * @busnumber - bus where new node is to be located
+ *
+ * Returns pointer to the new node or NULL if unsuccessful
+ */
+struct pci_func *shpchp_slot_create(u8 busnumber)
+{
+ struct pci_func *new_slot;
+ struct pci_func *next;
+
+ new_slot = kmalloc(sizeof(*new_slot), GFP_KERNEL);
+
+ if (new_slot == NULL) {
+ return(new_slot);
+ }
+
+ memset(new_slot, 0, sizeof(struct pci_func));
+
+ new_slot->next = NULL;
+ new_slot->configured = 1;
+
+ if (shpchp_slot_list[busnumber] == NULL) {
+ shpchp_slot_list[busnumber] = new_slot;
+ } else {
+ next = shpchp_slot_list[busnumber];
+ while (next->next != NULL)
+ next = next->next;
+ next->next = new_slot;
+ }
+ return(new_slot);
+}
+
+
+/*
+ * slot_remove - Removes a node from the linked list of slots.
+ * @old_slot: slot to remove
+ *
+ * Returns 0 if successful, !0 otherwise.
+ */
+static int slot_remove(struct pci_func * old_slot)
+{
+ struct pci_func *next;
+
+ if (old_slot == NULL)
+ return(1);
+
+ next = shpchp_slot_list[old_slot->bus];
+
+ if (next == NULL) {
+ return(1);
+ }
+
+ if (next == old_slot) {
+ shpchp_slot_list[old_slot->bus] = old_slot->next;
+ shpchp_destroy_board_resources(old_slot);
+ kfree(old_slot);
+ return(0);
+ }
+
+ while ((next->next != old_slot) && (next->next != NULL)) {
+ next = next->next;
+ }
+
+ if (next->next == old_slot) {
+ next->next = old_slot->next;
+ shpchp_destroy_board_resources(old_slot);
+ kfree(old_slot);
+ return(0);
+ } else
+ return(2);
+}
+
+
+/**
+ * bridge_slot_remove - Removes a node from the linked list of slots.
+ * @bridge: bridge to remove
+ *
+ * Returns 0 if successful, !0 otherwise.
+ */
+static int bridge_slot_remove(struct pci_func *bridge)
+{
+ u8 subordinateBus, secondaryBus;
+ u8 tempBus;
+ struct pci_func *next;
+
+ if (bridge == NULL)
+ return(1);
+
+ secondaryBus = (bridge->config_space[0x06] >> 8) & 0xFF;
+ subordinateBus = (bridge->config_space[0x06] >> 16) & 0xFF;
+
+ for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) {
+ next = shpchp_slot_list[tempBus];
+
+ while (!slot_remove(next)) {
+ next = shpchp_slot_list[tempBus];
+ }
+ }
+
+ next = shpchp_slot_list[bridge->bus];
+
+ if (next == NULL) {
+ return(1);
+ }
+
+ if (next == bridge) {
+ shpchp_slot_list[bridge->bus] = bridge->next;
+ kfree(bridge);
+ return(0);
+ }
+
+ while ((next->next != bridge) && (next->next != NULL)) {
+ next = next->next;
+ }
+
+ if (next->next == bridge) {
+ next->next = bridge->next;
+ kfree(bridge);
+ return(0);
+ } else
+ return(2);
+}
+
+
+/**
+ * shpchp_slot_find - Looks for a node by bus, and device, multiple functions accessed
+ * @bus: bus to find
+ * @device: device to find
+ * @index: is 0 for first function found, 1 for the second...
+ *
+ * Returns pointer to the node if successful, %NULL otherwise.
+ */
+struct pci_func *shpchp_slot_find(u8 bus, u8 device, u8 index)
+{
+ int found = -1;
+ struct pci_func *func;
+
+ func = shpchp_slot_list[bus];
+
+ if ((func == NULL) || ((func->device == device) && (index == 0)))
+ return(func);
+
+ if (func->device == device)
+ found++;
+
+ while (func->next != NULL) {
+ func = func->next;
+
+ if (func->device == device)
+ found++;
+
+ if (found == index)
+ return(func);
+ }
+
+ return(NULL);
+}
+
+static int is_bridge(struct pci_func * func)
+{
+ /* Check the header type */
+ if (((func->config_space[0x03] >> 16) & 0xFF) == 0x01)
+ return 1;
+ else
+ return 0;
+}
+
+
+/* The following routines constitute the bulk of the
+ hotplug controller logic
+ */
+static u32 change_bus_speed(struct controller *ctrl, struct slot *p_slot, enum pci_bus_speed speed)
+{
+ u32 rc = 0;
+
+ dbg("%s: change to speed %d\n", __FUNCTION__, speed);
+ down(&ctrl->crit_sect);
+ if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed))) {
+ err("%s: Issue of set bus speed mode command failed\n", __FUNCTION__);
+ up(&ctrl->crit_sect);
+ return WRONG_BUS_FREQUENCY;
+ }
+ wait_for_ctrl_irq (ctrl);
+
+ if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
+ err("%s: Can't set bus speed/mode in the case of adapter & bus mismatch\n",
+ __FUNCTION__);
+ err("%s: Error code (%d)\n", __FUNCTION__, rc);
+ up(&ctrl->crit_sect);
+ return WRONG_BUS_FREQUENCY;
+ }
+ up(&ctrl->crit_sect);
+ return rc;
+}
+
+static u32 fix_bus_speed(struct controller *ctrl, struct slot *pslot, u8 flag,
+enum pci_bus_speed asp, enum pci_bus_speed bsp, enum pci_bus_speed msp)
+{
+ u32 rc = 0;
+
+ if (flag != 0) { /* Other slots on the same bus are occupied */
+ if ( asp < bsp ) {
+ err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bsp, asp);
+ return WRONG_BUS_FREQUENCY;
+ }
+ } else {
+ /* Other slots on the same bus are empty */
+ if (msp == bsp) {
+ /* if adapter_speed >= bus_speed, do nothing */
+ if (asp < bsp) {
+ /*
+ * Try to lower bus speed to accommodate the adapter if other slots
+ * on the same controller are empty
+ */
+ if ((rc = change_bus_speed(ctrl, pslot, asp)))
+ return rc;
+ }
+ } else {
+ if (asp < msp) {
+ if ((rc = change_bus_speed(ctrl, pslot, asp)))
+ return rc;
+ } else {
+ if ((rc = change_bus_speed(ctrl, pslot, msp)))
+ return rc;
+ }
+ }
+ }
+ return rc;
+}
+
+/**
+ * board_added - Called after a board has been added to the system.
+ *
+ * Turns power on for the board
+ * Configures board
+ *
+ */
+static u32 board_added(struct pci_func * func, struct controller * ctrl)
+{
+ u8 hp_slot;
+ u8 slots_not_empty = 0;
+ int index;
+ u32 temp_register = 0xFFFFFFFF;
+ u32 retval, rc = 0;
+ struct pci_func *new_func = NULL;
+ struct slot *p_slot;
+ struct resource_lists res_lists;
+ enum pci_bus_speed adapter_speed, bus_speed, max_bus_speed;
+ u8 pi, mode;
+
+ p_slot = shpchp_find_slot(ctrl, func->device);
+ hp_slot = func->device - ctrl->slot_device_offset;
+
+ dbg("%s: func->device, slot_offset, hp_slot = %d, %d ,%d\n", __FUNCTION__, func->device, ctrl->slot_device_offset, hp_slot);
+
+ /* Wait for exclusive access to hardware */
+ down(&ctrl->crit_sect);
+
+ /* Power on slot without connecting to bus */
+ rc = p_slot->hpc_ops->power_on_slot(p_slot);
+ if (rc) {
+ err("%s: Failed to power on slot\n", __FUNCTION__);
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+ return -1;
+ }
+
+ /* Wait for the command to complete */
+ wait_for_ctrl_irq (ctrl);
+
+ rc = p_slot->hpc_ops->check_cmd_status(ctrl);
+ if (rc) {
+ err("%s: Failed to power on slot, error code(%d)\n", __FUNCTION__, rc);
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+ return -1;
+ }
+
+
+ if ((ctrl->pci_dev->vendor == 0x8086) && (ctrl->pci_dev->device == 0x0332)) {
+ if (slots_not_empty)
+ return WRONG_BUS_FREQUENCY;
+
+ if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz))) {
+ err("%s: Issue of set bus speed mode command failed\n", __FUNCTION__);
+ up(&ctrl->crit_sect);
+ return WRONG_BUS_FREQUENCY;
+ }
+ wait_for_ctrl_irq (ctrl);
+
+ if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
+ err("%s: Can't set bus speed/mode in the case of adapter & bus mismatch\n",
+ __FUNCTION__);
+ err("%s: Error code (%d)\n", __FUNCTION__, rc);
+ up(&ctrl->crit_sect);
+ return WRONG_BUS_FREQUENCY;
+ }
+ /* turn on board, blink green LED, turn off Amber LED */
+ if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
+ err("%s: Issue of Slot Enable command failed\n", __FUNCTION__);
+ up(&ctrl->crit_sect);
+ return rc;
+ }
+ wait_for_ctrl_irq (ctrl);
+
+ if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
+ err("%s: Failed to enable slot, error code(%d)\n", __FUNCTION__, rc);
+ up(&ctrl->crit_sect);
+ return rc;
+ }
+ }
+
+ rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &adapter_speed);
+ /* 0 = PCI 33Mhz, 1 = PCI 66 Mhz, 2 = PCI-X 66 PA, 4 = PCI-X 66 ECC, */
+ /* 5 = PCI-X 133 PA, 7 = PCI-X 133 ECC, 0xa = PCI-X 133 Mhz 266, */
+ /* 0xd = PCI-X 133 Mhz 533 */
+ /* This encoding is different from the one used in cur_bus_speed & */
+ /* max_bus_speed */
+
+ if (rc || adapter_speed == PCI_SPEED_UNKNOWN) {
+ err("%s: Can't get adapter speed or bus mode mismatch\n", __FUNCTION__);
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+ return WRONG_BUS_FREQUENCY;
+ }
+
+ rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bus_speed);
+ if (rc || bus_speed == PCI_SPEED_UNKNOWN) {
+ err("%s: Can't get bus operation speed\n", __FUNCTION__);
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+ return WRONG_BUS_FREQUENCY;
+ }
+
+ rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &max_bus_speed);
+ if (rc || max_bus_speed == PCI_SPEED_UNKNOWN) {
+ err("%s: Can't get max bus operation speed\n", __FUNCTION__);
+ max_bus_speed = bus_speed;
+ }
+
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+
+ if ((rc = p_slot->hpc_ops->get_prog_int(p_slot, &pi))) {
+ err("%s: Can't get controller programming interface, set it to 1\n", __FUNCTION__);
+ pi = 1;
+ }
+
+ /* Check if there are other slots or devices on the same bus */
+ if (!list_empty(&ctrl->pci_dev->subordinate->devices))
+ slots_not_empty = 1;
+
+ dbg("%s: slots_not_empty %d, pi %d\n", __FUNCTION__,
+ slots_not_empty, pi);
+ dbg("adapter_speed %d, bus_speed %d, max_bus_speed %d\n",
+ adapter_speed, bus_speed, max_bus_speed);
+
+ if (pi == 2) {
+ dbg("%s: In PI = %d\n", __FUNCTION__, pi);
+ if ((rc = p_slot->hpc_ops->get_mode1_ECC_cap(p_slot, &mode))) {
+ err("%s: Can't get Mode1_ECC, set mode to 0\n", __FUNCTION__);
+ mode = 0;
+ }
+
+ switch (adapter_speed) {
+ case PCI_SPEED_133MHz_PCIX_533:
+ case PCI_SPEED_133MHz_PCIX_266:
+ if ((bus_speed != adapter_speed) &&
+ ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
+ return rc;
+ break;
+ case PCI_SPEED_133MHz_PCIX_ECC:
+ case PCI_SPEED_133MHz_PCIX:
+ if (mode) { /* Bus - Mode 1 ECC */
+ if ((bus_speed != 0x7) &&
+ ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
+ return rc;
+ } else {
+ if ((bus_speed != 0x4) &&
+ ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
+ return rc;
+ }
+ break;
+ case PCI_SPEED_66MHz_PCIX_ECC:
+ case PCI_SPEED_66MHz_PCIX:
+ if (mode) { /* Bus - Mode 1 ECC */
+ if ((bus_speed != 0x5) &&
+ ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
+ return rc;
+ } else {
+ if ((bus_speed != 0x2) &&
+ ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
+ return rc;
+ }
+ break;
+ case PCI_SPEED_66MHz:
+ if ((bus_speed != 0x1) &&
+ ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
+ return rc;
+ break;
+ case PCI_SPEED_33MHz:
+ if (bus_speed > 0x0) {
+ if (slots_not_empty == 0) {
+ if ((rc = change_bus_speed(ctrl, p_slot, adapter_speed)))
+ return rc;
+ } else {
+ err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bus_speed, adapter_speed);
+ return WRONG_BUS_FREQUENCY;
+ }
+ }
+ break;
+ default:
+ err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bus_speed, adapter_speed);
+ return WRONG_BUS_FREQUENCY;
+ }
+ } else {
+ /* If adpater_speed == bus_speed, nothing to do here */
+ dbg("%s: In PI = %d\n", __FUNCTION__, pi);
+ if ((adapter_speed != bus_speed) &&
+ ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
+ return rc;
+ }
+
+ down(&ctrl->crit_sect);
+ /* turn on board, blink green LED, turn off Amber LED */
+ if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
+ err("%s: Issue of Slot Enable command failed\n", __FUNCTION__);
+ up(&ctrl->crit_sect);
+ return rc;
+ }
+ wait_for_ctrl_irq (ctrl);
+
+ if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
+ err("%s: Failed to enable slot, error code(%d)\n", __FUNCTION__, rc);
+ up(&ctrl->crit_sect);
+ return rc;
+ }
+
+ up(&ctrl->crit_sect);
+
+ /* Wait for ~1 second */
+ dbg("%s: before long_delay\n", __FUNCTION__);
+ wait_for_ctrl_irq (ctrl);
+ dbg("%s: after long_delay\n", __FUNCTION__);
+
+ dbg("%s: func status = %x\n", __FUNCTION__, func->status);
+ /* Check for a power fault */
+ if (func->status == 0xFF) {
+ /* power fault occurred, but it was benign */
+ temp_register = 0xFFFFFFFF;
+ dbg("%s: temp register set to %x by power fault\n", __FUNCTION__, temp_register);
+ rc = POWER_FAILURE;
+ func->status = 0;
+ } else {
+ /* Get vendor/device ID u32 */
+ rc = pci_bus_read_config_dword (ctrl->pci_dev->subordinate, PCI_DEVFN(func->device, func->function),
+ PCI_VENDOR_ID, &temp_register);
+ dbg("%s: pci_bus_read_config_dword returns %d\n", __FUNCTION__, rc);
+ dbg("%s: temp_register is %x\n", __FUNCTION__, temp_register);
+
+ if (rc != 0) {
+ /* Something's wrong here */
+ temp_register = 0xFFFFFFFF;
+ dbg("%s: temp register set to %x by error\n", __FUNCTION__, temp_register);
+ }
+ /* Preset return code. It will be changed later if things go okay. */
+ rc = NO_ADAPTER_PRESENT;
+ }
+
+ /* All F's is an empty slot or an invalid board */
+ if (temp_register != 0xFFFFFFFF) { /* Check for a board in the slot */
+ res_lists.io_head = ctrl->io_head;
+ res_lists.mem_head = ctrl->mem_head;
+ res_lists.p_mem_head = ctrl->p_mem_head;
+ res_lists.bus_head = ctrl->bus_head;
+ res_lists.irqs = NULL;
+
+ rc = configure_new_device(ctrl, func, 0, &res_lists, 0, 0);
+ dbg("%s: back from configure_new_device\n", __FUNCTION__);
+
+ ctrl->io_head = res_lists.io_head;
+ ctrl->mem_head = res_lists.mem_head;
+ ctrl->p_mem_head = res_lists.p_mem_head;
+ ctrl->bus_head = res_lists.bus_head;
+
+ shpchp_resource_sort_and_combine(&(ctrl->mem_head));
+ shpchp_resource_sort_and_combine(&(ctrl->p_mem_head));
+ shpchp_resource_sort_and_combine(&(ctrl->io_head));
+ shpchp_resource_sort_and_combine(&(ctrl->bus_head));
+
+ if (rc) {
+ /* Wait for exclusive access to hardware */
+ down(&ctrl->crit_sect);
+
+ /* turn off slot, turn on Amber LED, turn off Green LED */
+ retval = p_slot->hpc_ops->slot_disable(p_slot);
+ if (retval) {
+ err("%s: Issue of Slot Enable command failed\n", __FUNCTION__);
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+ return retval;
+ }
+ /* Wait for the command to complete */
+ wait_for_ctrl_irq (ctrl);
+
+ retval = p_slot->hpc_ops->check_cmd_status(ctrl);
+ if (retval) {
+ err("%s: Failed to disable slot, error code(%d)\n", __FUNCTION__, retval);
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+ return retval;
+ }
+
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+
+ return(rc);
+ }
+ shpchp_save_slot_config(ctrl, func);
+
+ func->status = 0;
+ func->switch_save = 0x10;
+ func->is_a_board = 0x01;
+ func->pwr_save = 1;
+
+ /* Next, we will instantiate the linux pci_dev structures
+ * (with appropriate driver notification, if already present)
+ */
+ index = 0;
+ do {
+ new_func = shpchp_slot_find(ctrl->slot_bus, func->device, index++);
+ if (new_func && !new_func->pci_dev) {
+ dbg("%s:call pci_hp_configure_dev\n", __FUNCTION__);
+ shpchp_configure_device(ctrl, new_func);
+ }
+ } while (new_func);
+
+ /* Wait for exclusive access to hardware */
+ down(&ctrl->crit_sect);
+
+ p_slot->hpc_ops->green_led_on(p_slot);
+
+ /* Wait for the command to complete */
+ wait_for_ctrl_irq (ctrl);
+
+
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+
+ } else {
+ /* Wait for exclusive access to hardware */
+ down(&ctrl->crit_sect);
+
+ /* turn off slot, turn on Amber LED, turn off Green LED */
+ rc = p_slot->hpc_ops->slot_disable(p_slot);
+ if (rc) {
+ err("%s: Issue of Slot Disable command failed\n", __FUNCTION__);
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+ return rc;
+ }
+ /* Wait for the command to complete */
+ wait_for_ctrl_irq (ctrl);
+
+ rc = p_slot->hpc_ops->check_cmd_status(ctrl);
+ if (rc) {
+ err("%s: Failed to disable slot, error code(%d)\n", __FUNCTION__, rc);
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+ return rc;
+ }
+
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+
+ return(rc);
+ }
+ return 0;
+}
+
+
+/**
+ * remove_board - Turns off slot and LED's
+ *
+ */
+static u32 remove_board(struct pci_func *func, struct controller *ctrl)
+{
+ int index;
+ u8 skip = 0;
+ u8 device;
+ u8 hp_slot;
+ u32 rc;
+ struct resource_lists res_lists;
+ struct pci_func *temp_func;
+ struct slot *p_slot;
+
+ if (func == NULL)
+ return(1);
+
+ if (shpchp_unconfigure_device(func))
+ return(1);
+
+ device = func->device;
+
+ hp_slot = func->device - ctrl->slot_device_offset;
+ p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
+
+ dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot);
+
+ if ((ctrl->add_support) &&
+ !(func->bus_head || func->mem_head || func->p_mem_head || func->io_head)) {
+ /* Here we check to see if we've saved any of the board's
+ * resources already. If so, we'll skip the attempt to
+ * determine what's being used.
+ */
+ index = 0;
+
+ temp_func = func;
+
+ while ((temp_func = shpchp_slot_find(temp_func->bus, temp_func->device, index++))) {
+ if (temp_func->bus_head || temp_func->mem_head
+ || temp_func->p_mem_head || temp_func->io_head) {
+ skip = 1;
+ break;
+ }
+ }
+
+ if (!skip)
+ rc = shpchp_save_used_resources(ctrl, func, DISABLE_CARD);
+ }
+ /* Change status to shutdown */
+ if (func->is_a_board)
+ func->status = 0x01;
+ func->configured = 0;
+
+ /* Wait for exclusive access to hardware */
+ down(&ctrl->crit_sect);
+
+ /* turn off slot, turn on Amber LED, turn off Green LED */
+ rc = p_slot->hpc_ops->slot_disable(p_slot);
+ if (rc) {
+ err("%s: Issue of Slot Disable command failed\n", __FUNCTION__);
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+ return rc;
+ }
+ /* Wait for the command to complete */
+ wait_for_ctrl_irq (ctrl);
+
+ rc = p_slot->hpc_ops->check_cmd_status(ctrl);
+ if (rc) {
+ err("%s: Failed to disable slot, error code(%d)\n", __FUNCTION__, rc);
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+ return rc;
+ }
+
+ rc = p_slot->hpc_ops->set_attention_status(p_slot, 0);
+ if (rc) {
+ err("%s: Issue of Set Attention command failed\n", __FUNCTION__);
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+ return rc;
+ }
+ /* Wait for the command to complete */
+ wait_for_ctrl_irq (ctrl);
+
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+
+ if (ctrl->add_support) {
+ while (func) {
+ res_lists.io_head = ctrl->io_head;
+ res_lists.mem_head = ctrl->mem_head;
+ res_lists.p_mem_head = ctrl->p_mem_head;
+ res_lists.bus_head = ctrl->bus_head;
+
+ dbg("Returning resources to ctlr lists for (B/D/F) = (%#x/%#x/%#x)\n", func->bus,
+ func->device, func->function);
+
+ shpchp_return_board_resources(func, &res_lists);
+
+ ctrl->io_head = res_lists.io_head;
+ ctrl->mem_head = res_lists.mem_head;
+ ctrl->p_mem_head = res_lists.p_mem_head;
+ ctrl->bus_head = res_lists.bus_head;
+
+ shpchp_resource_sort_and_combine(&(ctrl->mem_head));
+ shpchp_resource_sort_and_combine(&(ctrl->p_mem_head));
+ shpchp_resource_sort_and_combine(&(ctrl->io_head));
+ shpchp_resource_sort_and_combine(&(ctrl->bus_head));
+
+ if (is_bridge(func)) {
+ dbg("PCI Bridge Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus,
+ func->device, func->function);
+ bridge_slot_remove(func);
+ } else
+ dbg("PCI Function Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus,
+ func->device, func->function);
+ slot_remove(func);
+
+ func = shpchp_slot_find(ctrl->slot_bus, device, 0);
+ }
+
+ /* Setup slot structure with entry for empty slot */
+ func = shpchp_slot_create(ctrl->slot_bus);
+
+ if (func == NULL) {
+ return(1);
+ }
+
+ func->bus = ctrl->slot_bus;
+ func->device = device;
+ func->function = 0;
+ func->configured = 0;
+ func->switch_save = 0x10;
+ func->pwr_save = 0;
+ func->is_a_board = 0;
+ }
+
+ return 0;
+}
+
+
+static void pushbutton_helper_thread (unsigned long data)
+{
+ pushbutton_pending = data;
+
+ up(&event_semaphore);
+}
+
+
+/**
+ * shpchp_pushbutton_thread
+ *
+ * Scheduled procedure to handle blocking stuff for the pushbuttons
+ * Handles all pending events and exits.
+ *
+ */
+static void shpchp_pushbutton_thread (unsigned long slot)
+{
+ struct slot *p_slot = (struct slot *) slot;
+ u8 getstatus;
+
+ pushbutton_pending = 0;
+
+ if (!p_slot) {
+ dbg("%s: Error! slot NULL\n", __FUNCTION__);
+ return;
+ }
+
+ p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
+ if (getstatus) {
+ p_slot->state = POWEROFF_STATE;
+ dbg("In power_down_board, b:d(%x:%x)\n", p_slot->bus, p_slot->device);
+
+ shpchp_disable_slot(p_slot);
+ p_slot->state = STATIC_STATE;
+ } else {
+ p_slot->state = POWERON_STATE;
+ dbg("In add_board, b:d(%x:%x)\n", p_slot->bus, p_slot->device);
+
+ if (shpchp_enable_slot(p_slot)) {
+ /* Wait for exclusive access to hardware */
+ down(&p_slot->ctrl->crit_sect);
+
+ p_slot->hpc_ops->green_led_off(p_slot);
+
+ /* Wait for the command to complete */
+ wait_for_ctrl_irq (p_slot->ctrl);
+
+ /* Done with exclusive hardware access */
+ up(&p_slot->ctrl->crit_sect);
+ }
+ p_slot->state = STATIC_STATE;
+ }
+
+ return;
+}
+
+
+/* this is the main worker thread */
+static int event_thread(void* data)
+{
+ struct controller *ctrl;
+ lock_kernel();
+ daemonize("shpchpd_event");
+ unlock_kernel();
+
+ while (1) {
+ dbg("!!!!event_thread sleeping\n");
+ down_interruptible (&event_semaphore);
+ dbg("event_thread woken finished = %d\n", event_finished);
+ if (event_finished || signal_pending(current))
+ break;
+ /* Do stuff here */
+ if (pushbutton_pending)
+ shpchp_pushbutton_thread(pushbutton_pending);
+ else
+ for (ctrl = shpchp_ctrl_list; ctrl; ctrl=ctrl->next)
+ interrupt_event_handler(ctrl);
+ }
+ dbg("event_thread signals exit\n");
+ up(&event_exit);
+ return 0;
+}
+
+int shpchp_event_start_thread (void)
+{
+ int pid;
+
+ /* initialize our semaphores */
+ init_MUTEX_LOCKED(&event_exit);
+ event_finished=0;
+
+ init_MUTEX_LOCKED(&event_semaphore);
+ pid = kernel_thread(event_thread, NULL, 0);
+
+ if (pid < 0) {
+ err ("Can't start up our event thread\n");
+ return -1;
+ }
+ dbg("Our event thread pid = %d\n", pid);
+ return 0;
+}
+
+
+void shpchp_event_stop_thread (void)
+{
+ event_finished = 1;
+ dbg("event_thread finish command given\n");
+ up(&event_semaphore);
+ dbg("wait for event_thread to exit\n");
+ down(&event_exit);
+}
+
+
+static int update_slot_info (struct slot *slot)
+{
+ struct hotplug_slot_info *info;
+ int result;
+
+ info = kmalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ slot->hpc_ops->get_power_status(slot, &(info->power_status));
+ slot->hpc_ops->get_attention_status(slot, &(info->attention_status));
+ slot->hpc_ops->get_latch_status(slot, &(info->latch_status));
+ slot->hpc_ops->get_adapter_status(slot, &(info->adapter_status));
+
+ result = pci_hp_change_slot_info(slot->hotplug_slot, info);
+ kfree (info);
+ return result;
+}
+
+static void interrupt_event_handler(struct controller *ctrl)
+{
+ int loop = 0;
+ int change = 1;
+ struct pci_func *func;
+ u8 hp_slot;
+ u8 getstatus;
+ struct slot *p_slot;
+
+ dbg("%s:\n", __FUNCTION__);
+ while (change) {
+ change = 0;
+
+ for (loop = 0; loop < 10; loop++) {
+ if (ctrl->event_queue[loop].event_type != 0) {
+ dbg("%s:loop %x event_type %x\n", __FUNCTION__, loop,
+ ctrl->event_queue[loop].event_type);
+ hp_slot = ctrl->event_queue[loop].hp_slot;
+
+ func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
+
+ p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
+
+ dbg("%s: hp_slot %d, func %p, p_slot %p\n", __FUNCTION__, hp_slot, func, p_slot);
+
+ if (ctrl->event_queue[loop].event_type == INT_BUTTON_CANCEL) {
+ dbg("%s: button cancel\n", __FUNCTION__);
+ del_timer(&p_slot->task_event);
+
+ switch (p_slot->state) {
+ case BLINKINGOFF_STATE:
+ /* Wait for exclusive access to hardware */
+ down(&ctrl->crit_sect);
+
+ p_slot->hpc_ops->green_led_on(p_slot);
+ /* Wait for the command to complete */
+ wait_for_ctrl_irq (ctrl);
+
+ p_slot->hpc_ops->set_attention_status(p_slot, 0);
+
+ /* Wait for the command to complete */
+ wait_for_ctrl_irq (ctrl);
+
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+ break;
+ case BLINKINGON_STATE:
+ /* Wait for exclusive access to hardware */
+ down(&ctrl->crit_sect);
+
+ p_slot->hpc_ops->green_led_off(p_slot);
+ /* Wait for the command to complete */
+ wait_for_ctrl_irq (ctrl);
+
+ p_slot->hpc_ops->set_attention_status(p_slot, 0);
+ /* Wait for the command to complete */
+ wait_for_ctrl_irq (ctrl);
+
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+
+ break;
+ default:
+ warn("Not a valid state\n");
+ return;
+ }
+ info(msg_button_cancel, p_slot->number);
+ p_slot->state = STATIC_STATE;
+ } else if (ctrl->event_queue[loop].event_type == INT_BUTTON_PRESS) {
+ /* Button Pressed (No action on 1st press...) */
+ dbg("%s: Button pressed\n", __FUNCTION__);
+
+ p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
+ if (getstatus) {
+ /* slot is on */
+ dbg("%s: slot is on\n", __FUNCTION__);
+ p_slot->state = BLINKINGOFF_STATE;
+ info(msg_button_off, p_slot->number);
+ } else {
+ /* slot is off */
+ dbg("%s: slot is off\n", __FUNCTION__);
+ p_slot->state = BLINKINGON_STATE;
+ info(msg_button_on, p_slot->number);
+ }
+
+ /* Wait for exclusive access to hardware */
+ down(&ctrl->crit_sect);
+
+ /* blink green LED and turn off amber */
+ p_slot->hpc_ops->green_led_blink(p_slot);
+ /* Wait for the command to complete */
+ wait_for_ctrl_irq (ctrl);
+
+ p_slot->hpc_ops->set_attention_status(p_slot, 0);
+
+ /* Wait for the command to complete */
+ wait_for_ctrl_irq (ctrl);
+
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+
+ init_timer(&p_slot->task_event);
+ p_slot->task_event.expires = jiffies + 5 * HZ; /* 5 second delay */
+ p_slot->task_event.function = (void (*)(unsigned long)) pushbutton_helper_thread;
+ p_slot->task_event.data = (unsigned long) p_slot;
+
+ dbg("%s: add_timer p_slot = %p\n", __FUNCTION__,(void *) p_slot);
+ add_timer(&p_slot->task_event);
+ } else if (ctrl->event_queue[loop].event_type == INT_POWER_FAULT) {
+ /***********POWER FAULT********************/
+ dbg("%s: power fault\n", __FUNCTION__);
+ /* Wait for exclusive access to hardware */
+ down(&ctrl->crit_sect);
+
+ p_slot->hpc_ops->set_attention_status(p_slot, 1);
+ /* Wait for the command to complete */
+ wait_for_ctrl_irq (ctrl);
+
+ p_slot->hpc_ops->green_led_off(p_slot);
+ /* Wait for the command to complete */
+ wait_for_ctrl_irq (ctrl);
+
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+ } else {
+ /* refresh notification */
+ if (p_slot)
+ update_slot_info(p_slot);
+ }
+
+ ctrl->event_queue[loop].event_type = 0;
+
+ change = 1;
+ }
+ } /* End of FOR loop */
+ }
+
+ return;
+}
+
+
+int shpchp_enable_slot (struct slot *p_slot)
+{
+ u8 getstatus = 0;
+ int rc;
+ struct pci_func *func;
+
+ func = shpchp_slot_find(p_slot->bus, p_slot->device, 0);
+ if (!func) {
+ dbg("%s: Error! slot NULL\n", __FUNCTION__);
+ return 1;
+ }
+
+ /* Check to see if (latch closed, card present, power off) */
+ down(&p_slot->ctrl->crit_sect);
+ rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
+ if (rc || !getstatus) {
+ info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
+ up(&p_slot->ctrl->crit_sect);
+ return 1;
+ }
+ rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+ if (rc || getstatus) {
+ info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
+ up(&p_slot->ctrl->crit_sect);
+ return 1;
+ }
+ rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
+ if (rc || getstatus) {
+ info("%s: already enabled on slot(%x)\n", __FUNCTION__, p_slot->number);
+ up(&p_slot->ctrl->crit_sect);
+ return 1;
+ }
+ up(&p_slot->ctrl->crit_sect);
+
+ slot_remove(func);
+
+ func = shpchp_slot_create(p_slot->bus);
+ if (func == NULL)
+ return 1;
+
+ func->bus = p_slot->bus;
+ func->device = p_slot->device;
+ func->function = 0;
+ func->configured = 0;
+ func->is_a_board = 1;
+
+ /* We have to save the presence info for these slots */
+ p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
+ p_slot->hpc_ops->get_power_status(p_slot, &(func->pwr_save));
+ dbg("%s: func->pwr_save %x\n", __FUNCTION__, func->pwr_save);
+ p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+ func->switch_save = !getstatus? 0x10:0;
+
+ rc = board_added(func, p_slot->ctrl);
+ if (rc) {
+ if (is_bridge(func))
+ bridge_slot_remove(func);
+ else
+ slot_remove(func);
+
+ /* Setup slot structure with entry for empty slot */
+ func = shpchp_slot_create(p_slot->bus);
+ if (func == NULL)
+ return (1); /* Out of memory */
+
+ func->bus = p_slot->bus;
+ func->device = p_slot->device;
+ func->function = 0;
+ func->configured = 0;
+ func->is_a_board = 1;
+
+ /* We have to save the presence info for these slots */
+ p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
+ p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+ func->switch_save = !getstatus? 0x10:0;
+ }
+
+ if (p_slot)
+ update_slot_info(p_slot);
+
+ return rc;
+}
+
+
+int shpchp_disable_slot (struct slot *p_slot)
+{
+ u8 class_code, header_type, BCR;
+ u8 index = 0;
+ u8 getstatus = 0;
+ u32 rc = 0;
+ int ret = 0;
+ unsigned int devfn;
+ struct pci_bus *pci_bus;
+ struct pci_func *func;
+
+ if (!p_slot->ctrl)
+ return 1;
+
+ pci_bus = p_slot->ctrl->pci_dev->subordinate;
+
+ /* Check to see if (latch closed, card present, power on) */
+ down(&p_slot->ctrl->crit_sect);
+
+ ret = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
+ if (ret || !getstatus) {
+ info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
+ up(&p_slot->ctrl->crit_sect);
+ return 1;
+ }
+ ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+ if (ret || getstatus) {
+ info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
+ up(&p_slot->ctrl->crit_sect);
+ return 1;
+ }
+ ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
+ if (ret || !getstatus) {
+ info("%s: already disabled slot(%x)\n", __FUNCTION__, p_slot->number);
+ up(&p_slot->ctrl->crit_sect);
+ return 1;
+ }
+ up(&p_slot->ctrl->crit_sect);
+
+ func = shpchp_slot_find(p_slot->bus, p_slot->device, index++);
+
+ /* Make sure there are no video controllers here
+ * for all func of p_slot
+ */
+ while (func && !rc) {
+ pci_bus->number = func->bus;
+ devfn = PCI_DEVFN(func->device, func->function);
+
+ /* Check the Class Code */
+ rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
+ if (rc)
+ return rc;
+
+ if (class_code == PCI_BASE_CLASS_DISPLAY) {
+ /* Display/Video adapter (not supported) */
+ rc = REMOVE_NOT_SUPPORTED;
+ } else {
+ /* See if it's a bridge */
+ rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
+ if (rc)
+ return rc;
+
+ /* If it's a bridge, check the VGA Enable bit */
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+ rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_BRIDGE_CONTROL, &BCR);
+ if (rc)
+ return rc;
+
+ /* If the VGA Enable bit is set, remove isn't supported */
+ if (BCR & PCI_BRIDGE_CTL_VGA) {
+ rc = REMOVE_NOT_SUPPORTED;
+ }
+ }
+ }
+
+ func = shpchp_slot_find(p_slot->bus, p_slot->device, index++);
+ }
+
+ func = shpchp_slot_find(p_slot->bus, p_slot->device, 0);
+ if ((func != NULL) && !rc) {
+ rc = remove_board(func, p_slot->ctrl);
+ } else if (!rc)
+ rc = 1;
+
+ if (p_slot)
+ update_slot_info(p_slot);
+
+ return(rc);
+}
+
+
+/**
+ * configure_new_device - Configures the PCI header information of one board.
+ *
+ * @ctrl: pointer to controller structure
+ * @func: pointer to function structure
+ * @behind_bridge: 1 if this is a recursive call, 0 if not
+ * @resources: pointer to set of resource lists
+ *
+ * Returns 0 if success
+ *
+ */
+static u32 configure_new_device (struct controller * ctrl, struct pci_func * func,
+ u8 behind_bridge, struct resource_lists * resources, u8 bridge_bus, u8 bridge_dev)
+{
+ u8 temp_byte, function, max_functions, stop_it;
+ int rc;
+ u32 ID;
+ struct pci_func *new_slot;
+ struct pci_bus lpci_bus, *pci_bus;
+ int index;
+
+ new_slot = func;
+
+ dbg("%s\n", __FUNCTION__);
+ memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
+ pci_bus = &lpci_bus;
+ pci_bus->number = func->bus;
+
+ /* Check for Multi-function device */
+ rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(func->device, func->function), 0x0E, &temp_byte);
+ if (rc) {
+ dbg("%s: rc = %d\n", __FUNCTION__, rc);
+ return rc;
+ }
+
+ if (temp_byte & 0x80) /* Multi-function device */
+ max_functions = 8;
+ else
+ max_functions = 1;
+
+ function = 0;
+
+ do {
+ rc = configure_new_function(ctrl, new_slot, behind_bridge, resources, bridge_bus, bridge_dev);
+
+ if (rc) {
+ dbg("configure_new_function failed %d\n",rc);
+ index = 0;
+
+ while (new_slot) {
+ new_slot = shpchp_slot_find(new_slot->bus, new_slot->device, index++);
+
+ if (new_slot)
+ shpchp_return_board_resources(new_slot, resources);
+ }
+
+ return(rc);
+ }
+
+ function++;
+
+ stop_it = 0;
+
+ /* The following loop skips to the next present function
+ * and creates a board structure
+ */
+
+ while ((function < max_functions) && (!stop_it)) {
+ pci_bus_read_config_dword(pci_bus, PCI_DEVFN(func->device, function), 0x00, &ID);
+
+ if (ID == 0xFFFFFFFF) { /* There's nothing there. */
+ function++;
+ } else { /* There's something there */
+ /* Setup slot structure. */
+ new_slot = shpchp_slot_create(func->bus);
+
+ if (new_slot == NULL) {
+ /* Out of memory */
+ return(1);
+ }
+
+ new_slot->bus = func->bus;
+ new_slot->device = func->device;
+ new_slot->function = function;
+ new_slot->is_a_board = 1;
+ new_slot->status = 0;
+
+ stop_it++;
+ }
+ }
+
+ } while (function < max_functions);
+ dbg("returning from configure_new_device\n");
+
+ return 0;
+}
+
+
+/*
+ * Configuration logic that involves the hotplug data structures and
+ * their bookkeeping
+ */
+
+
+/**
+ * configure_new_function - Configures the PCI header information of one device
+ *
+ * @ctrl: pointer to controller structure
+ * @func: pointer to function structure
+ * @behind_bridge: 1 if this is a recursive call, 0 if not
+ * @resources: pointer to set of resource lists
+ *
+ * Calls itself recursively for bridged devices.
+ * Returns 0 if success
+ *
+ */
+static int configure_new_function (struct controller * ctrl, struct pci_func * func,
+ u8 behind_bridge, struct resource_lists *resources, u8 bridge_bus, u8 bridge_dev)
+{
+ int cloop;
+ u8 temp_byte;
+ u8 device;
+ u8 class_code;
+ u16 temp_word;
+ u32 rc;
+ u32 temp_register;
+ u32 base;
+ u32 ID;
+ unsigned int devfn;
+ struct pci_resource *mem_node;
+ struct pci_resource *p_mem_node;
+ struct pci_resource *io_node;
+ struct pci_resource *bus_node;
+ struct pci_resource *hold_mem_node;
+ struct pci_resource *hold_p_mem_node;
+ struct pci_resource *hold_IO_node;
+ struct pci_resource *hold_bus_node;
+ struct irq_mapping irqs;
+ struct pci_func *new_slot;
+ struct pci_bus lpci_bus, *pci_bus;
+ struct resource_lists temp_resources;
+#if defined(CONFIG_X86_64)
+ u8 IRQ=0;
+#endif
+
+ memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
+ pci_bus = &lpci_bus;
+ pci_bus->number = func->bus;
+ devfn = PCI_DEVFN(func->device, func->function);
+
+ /* Check for Bridge */
+ rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &temp_byte);
+ if (rc)
+ return rc;
+
+ if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */
+ /* set Primary bus */
+ dbg("set Primary bus = 0x%x\n", func->bus);
+ rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_PRIMARY_BUS, func->bus);
+ if (rc)
+ return rc;
+
+ /* find range of busses to use */
+ bus_node = get_max_resource(&resources->bus_head, 1L);
+
+ /* If we don't have any busses to allocate, we can't continue */
+ if (!bus_node) {
+ err("Got NO bus resource to use\n");
+ return -ENOMEM;
+ }
+ dbg("Got ranges of buses to use: base:len=0x%x:%x\n", bus_node->base, bus_node->length);
+
+ /* set Secondary bus */
+ temp_byte = (u8)bus_node->base;
+ dbg("set Secondary bus = 0x%x\n", temp_byte);
+ rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, temp_byte);
+ if (rc)
+ return rc;
+
+ /* set subordinate bus */
+ temp_byte = (u8)(bus_node->base + bus_node->length - 1);
+ dbg("set subordinate bus = 0x%x\n", temp_byte);
+ rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_SUBORDINATE_BUS, temp_byte);
+ if (rc)
+ return rc;
+
+ /* Set HP parameters (Cache Line Size, Latency Timer) */
+ rc = shpchprm_set_hpp(ctrl, func, PCI_HEADER_TYPE_BRIDGE);
+ if (rc)
+ return rc;
+
+ /* Setup the IO, memory, and prefetchable windows */
+
+ io_node = get_max_resource(&(resources->io_head), 0x1000L);
+ if (io_node) {
+ dbg("io_node(base, len, next) (%x, %x, %p)\n", io_node->base, io_node->length, io_node->next);
+ }
+
+ mem_node = get_max_resource(&(resources->mem_head), 0x100000L);
+ if (mem_node) {
+ dbg("mem_node(base, len, next) (%x, %x, %p)\n", mem_node->base, mem_node->length, mem_node->next);
+ }
+
+ if (resources->p_mem_head)
+ p_mem_node = get_max_resource(&(resources->p_mem_head), 0x100000L);
+ else {
+ /*
+ * In some platform implementation, MEM and PMEM are not
+ * distinguished, and hence ACPI _CRS has only MEM entries
+ * for both MEM and PMEM.
+ */
+ dbg("using MEM for PMEM\n");
+ p_mem_node = get_max_resource(&(resources->mem_head), 0x100000L);
+ }
+ if (p_mem_node) {
+ dbg("p_mem_node(base, len, next) (%x, %x, %p)\n", p_mem_node->base, p_mem_node->length, p_mem_node->next);
+ }
+
+ /* set up the IRQ info */
+ if (!resources->irqs) {
+ irqs.barber_pole = 0;
+ irqs.interrupt[0] = 0;
+ irqs.interrupt[1] = 0;
+ irqs.interrupt[2] = 0;
+ irqs.interrupt[3] = 0;
+ irqs.valid_INT = 0;
+ } else {
+ irqs.barber_pole = resources->irqs->barber_pole;
+ irqs.interrupt[0] = resources->irqs->interrupt[0];
+ irqs.interrupt[1] = resources->irqs->interrupt[1];
+ irqs.interrupt[2] = resources->irqs->interrupt[2];
+ irqs.interrupt[3] = resources->irqs->interrupt[3];
+ irqs.valid_INT = resources->irqs->valid_INT;
+ }
+
+ /* set up resource lists that are now aligned on top and bottom
+ * for anything behind the bridge.
+ */
+ temp_resources.bus_head = bus_node;
+ temp_resources.io_head = io_node;
+ temp_resources.mem_head = mem_node;
+ temp_resources.p_mem_head = p_mem_node;
+ temp_resources.irqs = &irqs;
+
+ /* Make copies of the nodes we are going to pass down so that
+ * if there is a problem,we can just use these to free resources
+ */
+ hold_bus_node = kmalloc(sizeof(*hold_bus_node), GFP_KERNEL);
+ hold_IO_node = kmalloc(sizeof(*hold_IO_node), GFP_KERNEL);
+ hold_mem_node = kmalloc(sizeof(*hold_mem_node), GFP_KERNEL);
+ hold_p_mem_node = kmalloc(sizeof(*hold_p_mem_node), GFP_KERNEL);
+
+ if (!hold_bus_node || !hold_IO_node || !hold_mem_node || !hold_p_mem_node) {
+ kfree(hold_bus_node);
+ kfree(hold_IO_node);
+ kfree(hold_mem_node);
+ kfree(hold_p_mem_node);
+
+ return 1;
+ }
+
+ memcpy(hold_bus_node, bus_node, sizeof(struct pci_resource));
+
+ bus_node->base += 1;
+ bus_node->length -= 1;
+ bus_node->next = NULL;
+
+ /* If we have IO resources copy them and fill in the bridge's
+ * IO range registers
+ */
+ if (io_node) {
+ memcpy(hold_IO_node, io_node, sizeof(struct pci_resource));
+ io_node->next = NULL;
+
+ /* set IO base and Limit registers */
+ RES_CHECK(io_node->base, 8);
+ temp_byte = (u8)(io_node->base >> 8);
+ rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_BASE, temp_byte);
+
+ RES_CHECK(io_node->base + io_node->length - 1, 8);
+ temp_byte = (u8)((io_node->base + io_node->length - 1) >> 8);
+ rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_LIMIT, temp_byte);
+ } else {
+ kfree(hold_IO_node);
+ hold_IO_node = NULL;
+ }
+
+ /* If we have memory resources copy them and fill in the bridge's
+ * memory range registers. Otherwise, fill in the range
+ * registers with values that disable them.
+ */
+ if (mem_node) {
+ memcpy(hold_mem_node, mem_node, sizeof(struct pci_resource));
+ mem_node->next = NULL;
+
+ /* set Mem base and Limit registers */
+ RES_CHECK(mem_node->base, 16);
+ temp_word = (u32)(mem_node->base >> 16);
+ rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_BASE, temp_word);
+
+ RES_CHECK(mem_node->base + mem_node->length - 1, 16);
+ temp_word = (u32)((mem_node->base + mem_node->length - 1) >> 16);
+ rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
+ } else {
+ temp_word = 0xFFFF;
+ rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_BASE, temp_word);
+
+ temp_word = 0x0000;
+ rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
+
+ kfree(hold_mem_node);
+ hold_mem_node = NULL;
+ }
+
+ /* If we have prefetchable memory resources copy them and
+ * fill in the bridge's memory range registers. Otherwise,
+ * fill in the range registers with values that disable them.
+ */
+ if (p_mem_node) {
+ memcpy(hold_p_mem_node, p_mem_node, sizeof(struct pci_resource));
+ p_mem_node->next = NULL;
+
+ /* set Pre Mem base and Limit registers */
+ RES_CHECK(p_mem_node->base, 16);
+ temp_word = (u32)(p_mem_node->base >> 16);
+ rc = pci_bus_write_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word);
+
+ RES_CHECK(p_mem_node->base + p_mem_node->length - 1, 16);
+ temp_word = (u32)((p_mem_node->base + p_mem_node->length - 1) >> 16);
+ rc = pci_bus_write_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
+ } else {
+ temp_word = 0xFFFF;
+ rc = pci_bus_write_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word);
+
+ temp_word = 0x0000;
+ rc = pci_bus_write_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
+
+ kfree(hold_p_mem_node);
+ hold_p_mem_node = NULL;
+ }
+
+ /* Adjust this to compensate for extra adjustment in first loop */
+ irqs.barber_pole--;
+
+ rc = 0;
+
+ /* Here we actually find the devices and configure them */
+ for (device = 0; (device <= 0x1F) && !rc; device++) {
+ irqs.barber_pole = (irqs.barber_pole + 1) & 0x03;
+
+ ID = 0xFFFFFFFF;
+ pci_bus->number = hold_bus_node->base;
+ pci_bus_read_config_dword(pci_bus, PCI_DEVFN(device, 0),
+ PCI_VENDOR_ID, &ID);
+ pci_bus->number = func->bus;
+
+ if (ID != 0xFFFFFFFF) { /* device Present */
+ /* Setup slot structure. */
+ new_slot = shpchp_slot_create(hold_bus_node->base);
+
+ if (new_slot == NULL) {
+ /* Out of memory */
+ rc = -ENOMEM;
+ continue;
+ }
+
+ new_slot->bus = hold_bus_node->base;
+ new_slot->device = device;
+ new_slot->function = 0;
+ new_slot->is_a_board = 1;
+ new_slot->status = 0;
+
+ rc = configure_new_device(ctrl, new_slot, 1, &temp_resources, func->bus, func->device);
+ dbg("configure_new_device rc=0x%x\n",rc);
+ } /* End of IF (device in slot?) */
+ } /* End of FOR loop */
+
+ if (rc) {
+ shpchp_destroy_resource_list(&temp_resources);
+
+ return_resource(&(resources->bus_head), hold_bus_node);
+ return_resource(&(resources->io_head), hold_IO_node);
+ return_resource(&(resources->mem_head), hold_mem_node);
+ return_resource(&(resources->p_mem_head), hold_p_mem_node);
+ return(rc);
+ }
+
+ /* save the interrupt routing information */
+ if (resources->irqs) {
+ resources->irqs->interrupt[0] = irqs.interrupt[0];
+ resources->irqs->interrupt[1] = irqs.interrupt[1];
+ resources->irqs->interrupt[2] = irqs.interrupt[2];
+ resources->irqs->interrupt[3] = irqs.interrupt[3];
+ resources->irqs->valid_INT = irqs.valid_INT;
+ } else if (!behind_bridge) {
+ /* We need to hook up the interrupts here */
+ for (cloop = 0; cloop < 4; cloop++) {
+ if (irqs.valid_INT & (0x01 << cloop)) {
+ rc = shpchp_set_irq(func->bus, func->device,
+ 0x0A + cloop, irqs.interrupt[cloop]);
+ if (rc) {
+ shpchp_destroy_resource_list (&temp_resources);
+ return_resource(&(resources->bus_head), hold_bus_node);
+ return_resource(&(resources->io_head), hold_IO_node);
+ return_resource(&(resources->mem_head), hold_mem_node);
+ return_resource(&(resources->p_mem_head), hold_p_mem_node);
+ return rc;
+ }
+ }
+ } /* end of for loop */
+ }
+
+ /* Return unused bus resources
+ * First use the temporary node to store information for the board
+ */
+ if (hold_bus_node && bus_node && temp_resources.bus_head) {
+ hold_bus_node->length = bus_node->base - hold_bus_node->base;
+
+ hold_bus_node->next = func->bus_head;
+ func->bus_head = hold_bus_node;
+
+ temp_byte = (u8)(temp_resources.bus_head->base - 1);
+
+ /* set subordinate bus */
+ dbg("re-set subordinate bus = 0x%x\n", temp_byte);
+ rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_SUBORDINATE_BUS, temp_byte);
+
+ if (temp_resources.bus_head->length == 0) {
+ kfree(temp_resources.bus_head);
+ temp_resources.bus_head = NULL;
+ } else {
+ dbg("return bus res of b:d(0x%x:%x) base:len(0x%x:%x)\n",
+ func->bus, func->device, temp_resources.bus_head->base, temp_resources.bus_head->length);
+ return_resource(&(resources->bus_head), temp_resources.bus_head);
+ }
+ }
+
+ /* If we have IO space available and there is some left,
+ * return the unused portion
+ */
+ if (hold_IO_node && temp_resources.io_head) {
+ io_node = do_pre_bridge_resource_split(&(temp_resources.io_head),
+ &hold_IO_node, 0x1000);
+
+ /* Check if we were able to split something off */
+ if (io_node) {
+ hold_IO_node->base = io_node->base + io_node->length;
+
+ RES_CHECK(hold_IO_node->base, 8);
+ temp_byte = (u8)((hold_IO_node->base) >> 8);
+ rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_IO_BASE, temp_byte);
+
+ return_resource(&(resources->io_head), io_node);
+ }
+
+ io_node = do_bridge_resource_split(&(temp_resources.io_head), 0x1000);
+
+ /* Check if we were able to split something off */
+ if (io_node) {
+ /* First use the temporary node to store information for the board */
+ hold_IO_node->length = io_node->base - hold_IO_node->base;
+
+ /* If we used any, add it to the board's list */
+ if (hold_IO_node->length) {
+ hold_IO_node->next = func->io_head;
+ func->io_head = hold_IO_node;
+
+ RES_CHECK(io_node->base - 1, 8);
+ temp_byte = (u8)((io_node->base - 1) >> 8);
+ rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_IO_LIMIT, temp_byte);
+
+ return_resource(&(resources->io_head), io_node);
+ } else {
+ /* it doesn't need any IO */
+ temp_byte = 0x00;
+ rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_LIMIT, temp_byte);
+
+ return_resource(&(resources->io_head), io_node);
+ kfree(hold_IO_node);
+ }
+ } else {
+ /* it used most of the range */
+ hold_IO_node->next = func->io_head;
+ func->io_head = hold_IO_node;
+ }
+ } else if (hold_IO_node) {
+ /* it used the whole range */
+ hold_IO_node->next = func->io_head;
+ func->io_head = hold_IO_node;
+ }
+
+ /* If we have memory space available and there is some left,
+ * return the unused portion
+ */
+ if (hold_mem_node && temp_resources.mem_head) {
+ mem_node = do_pre_bridge_resource_split(&(temp_resources.mem_head), &hold_mem_node, 0x100000L);
+
+ /* Check if we were able to split something off */
+ if (mem_node) {
+ hold_mem_node->base = mem_node->base + mem_node->length;
+
+ RES_CHECK(hold_mem_node->base, 16);
+ temp_word = (u32)((hold_mem_node->base) >> 16);
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_BASE, temp_word);
+
+ return_resource(&(resources->mem_head), mem_node);
+ }
+
+ mem_node = do_bridge_resource_split(&(temp_resources.mem_head), 0x100000L);
+
+ /* Check if we were able to split something off */
+ if (mem_node) {
+ /* First use the temporary node to store information for the board */
+ hold_mem_node->length = mem_node->base - hold_mem_node->base;
+
+ if (hold_mem_node->length) {
+ hold_mem_node->next = func->mem_head;
+ func->mem_head = hold_mem_node;
+
+ /* configure end address */
+ RES_CHECK(mem_node->base - 1, 16);
+ temp_word = (u32)((mem_node->base - 1) >> 16);
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
+
+ /* Return unused resources to the pool */
+ return_resource(&(resources->mem_head), mem_node);
+ } else {
+ /* it doesn't need any Mem */
+ temp_word = 0x0000;
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
+
+ return_resource(&(resources->mem_head), mem_node);
+ kfree(hold_mem_node);
+ }
+ } else {
+ /* it used most of the range */
+ hold_mem_node->next = func->mem_head;
+ func->mem_head = hold_mem_node;
+ }
+ } else if (hold_mem_node) {
+ /* it used the whole range */
+ hold_mem_node->next = func->mem_head;
+ func->mem_head = hold_mem_node;
+ }
+
+ /* If we have prefetchable memory space available and there is some
+ * left at the end, return the unused portion
+ */
+ if (hold_p_mem_node && temp_resources.p_mem_head) {
+ p_mem_node = do_pre_bridge_resource_split(&(temp_resources.p_mem_head),
+ &hold_p_mem_node, 0x100000L);
+
+ /* Check if we were able to split something off */
+ if (p_mem_node) {
+ hold_p_mem_node->base = p_mem_node->base + p_mem_node->length;
+
+ RES_CHECK(hold_p_mem_node->base, 16);
+ temp_word = (u32)((hold_p_mem_node->base) >> 16);
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word);
+
+ return_resource(&(resources->p_mem_head), p_mem_node);
+ }
+
+ p_mem_node = do_bridge_resource_split(&(temp_resources.p_mem_head), 0x100000L);
+
+ /* Check if we were able to split something off */
+ if (p_mem_node) {
+ /* First use the temporary node to store information for the board */
+ hold_p_mem_node->length = p_mem_node->base - hold_p_mem_node->base;
+
+ /* If we used any, add it to the board's list */
+ if (hold_p_mem_node->length) {
+ hold_p_mem_node->next = func->p_mem_head;
+ func->p_mem_head = hold_p_mem_node;
+
+ RES_CHECK(p_mem_node->base - 1, 16);
+ temp_word = (u32)((p_mem_node->base - 1) >> 16);
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
+
+ return_resource(&(resources->p_mem_head), p_mem_node);
+ } else {
+ /* it doesn't need any PMem */
+ temp_word = 0x0000;
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
+
+ return_resource(&(resources->p_mem_head), p_mem_node);
+ kfree(hold_p_mem_node);
+ }
+ } else {
+ /* it used the most of the range */
+ hold_p_mem_node->next = func->p_mem_head;
+ func->p_mem_head = hold_p_mem_node;
+ }
+ } else if (hold_p_mem_node) {
+ /* it used the whole range */
+ hold_p_mem_node->next = func->p_mem_head;
+ func->p_mem_head = hold_p_mem_node;
+ }
+
+ /* We should be configuring an IRQ and the bridge's base address
+ * registers if it needs them. Although we have never seen such
+ * a device
+ */
+
+ shpchprm_enable_card(ctrl, func, PCI_HEADER_TYPE_BRIDGE);
+
+ dbg("PCI Bridge Hot-Added s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, func->device, func->function);
+ } else if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_NORMAL) {
+ /* Standard device */
+ u64 base64;
+ rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
+
+ if (class_code == PCI_BASE_CLASS_DISPLAY)
+ return (DEVICE_TYPE_NOT_SUPPORTED);
+
+ /* Figure out IO and memory needs */
+ for (cloop = PCI_BASE_ADDRESS_0; cloop <= PCI_BASE_ADDRESS_5; cloop += 4) {
+ temp_register = 0xFFFFFFFF;
+
+ rc = pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
+ rc = pci_bus_read_config_dword(pci_bus, devfn, cloop, &temp_register);
+ dbg("Bar[%x]=0x%x on bus:dev:func(0x%x:%x:%x)\n", cloop, temp_register, func->bus, func->device,
+ func->function);
+
+ if (!temp_register)
+ continue;
+
+ base64 = 0L;
+ if (temp_register & PCI_BASE_ADDRESS_SPACE_IO) {
+ /* Map IO */
+
+ /* set base = amount of IO space */
+ base = temp_register & 0xFFFFFFFC;
+ base = ~base + 1;
+
+ dbg("NEED IO length(0x%x)\n", base);
+ io_node = get_io_resource(&(resources->io_head),(ulong)base);
+
+ /* allocate the resource to the board */
+ if (io_node) {
+ dbg("Got IO base=0x%x(length=0x%x)\n", io_node->base, io_node->length);
+ base = (u32)io_node->base;
+ io_node->next = func->io_head;
+ func->io_head = io_node;
+ } else {
+ err("Got NO IO resource(length=0x%x)\n", base);
+ return -ENOMEM;
+ }
+ } else { /* map MEM */
+ int prefetchable = 1;
+ struct pci_resource **res_node = &func->p_mem_head;
+ char *res_type_str = "PMEM";
+ u32 temp_register2;
+
+ if (!(temp_register & PCI_BASE_ADDRESS_MEM_PREFETCH)) {
+ prefetchable = 0;
+ res_node = &func->mem_head;
+ res_type_str++;
+ }
+
+ base = temp_register & 0xFFFFFFF0;
+ base = ~base + 1;
+
+ switch (temp_register & PCI_BASE_ADDRESS_MEM_TYPE_MASK) {
+ case PCI_BASE_ADDRESS_MEM_TYPE_32:
+ dbg("NEED 32 %s bar=0x%x(length=0x%x)\n", res_type_str, temp_register, base);
+
+ if (prefetchable && resources->p_mem_head)
+ mem_node=get_resource(&(resources->p_mem_head), (ulong)base);
+ else {
+ if (prefetchable)
+ dbg("using MEM for PMEM\n");
+ mem_node=get_resource(&(resources->mem_head), (ulong)base);
+ }
+
+ /* allocate the resource to the board */
+ if (mem_node) {
+ base = (u32)mem_node->base;
+ mem_node->next = *res_node;
+ *res_node = mem_node;
+ dbg("Got 32 %s base=0x%x(length=0x%x)\n", res_type_str, mem_node->base,
+ mem_node->length);
+ } else {
+ err("Got NO 32 %s resource(length=0x%x)\n", res_type_str, base);
+ return -ENOMEM;
+ }
+ break;
+ case PCI_BASE_ADDRESS_MEM_TYPE_64:
+ rc = pci_bus_read_config_dword(pci_bus, devfn, cloop+4, &temp_register2);
+ dbg("NEED 64 %s bar=0x%x:%x(length=0x%x)\n", res_type_str, temp_register2,
+ temp_register, base);
+
+ if (prefetchable && resources->p_mem_head)
+ mem_node = get_resource(&(resources->p_mem_head), (ulong)base);
+ else {
+ if (prefetchable)
+ dbg("using MEM for PMEM\n");
+ mem_node = get_resource(&(resources->mem_head), (ulong)base);
+ }
+
+ /* allocate the resource to the board */
+ if (mem_node) {
+ base64 = mem_node->base;
+ mem_node->next = *res_node;
+ *res_node = mem_node;
+ dbg("Got 64 %s base=0x%x:%x(length=%x)\n", res_type_str, (u32)(base64 >> 32),
+ (u32)base64, mem_node->length);
+ } else {
+ err("Got NO 64 %s resource(length=0x%x)\n", res_type_str, base);
+ return -ENOMEM;
+ }
+ break;
+ default:
+ dbg("reserved BAR type=0x%x\n", temp_register);
+ break;
+ }
+
+ }
+
+ if (base64) {
+ rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, (u32)base64);
+ cloop += 4;
+ base64 >>= 32;
+
+ if (base64) {
+ dbg("%s: high dword of base64(0x%x) set to 0\n", __FUNCTION__, (u32)base64);
+ base64 = 0x0L;
+ }
+
+ rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, (u32)base64);
+ } else {
+ rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, base);
+ }
+ } /* End of base register loop */
+
+#if defined(CONFIG_X86_64)
+ /* Figure out which interrupt pin this function uses */
+ rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_INTERRUPT_PIN, &temp_byte);
+
+ /* If this function needs an interrupt and we are behind a bridge
+ and the pin is tied to something that's alread mapped,
+ set this one the same
+ */
+ if (temp_byte && resources->irqs &&
+ (resources->irqs->valid_INT &
+ (0x01 << ((temp_byte + resources->irqs->barber_pole - 1) & 0x03)))) {
+ /* We have to share with something already set up */
+ IRQ = resources->irqs->interrupt[(temp_byte + resources->irqs->barber_pole - 1) & 0x03];
+ } else {
+ /* Program IRQ based on card type */
+ rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
+
+ if (class_code == PCI_BASE_CLASS_STORAGE) {
+ IRQ = shpchp_disk_irq;
+ } else {
+ IRQ = shpchp_nic_irq;
+ }
+ }
+
+ /* IRQ Line */
+ rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_INTERRUPT_LINE, IRQ);
+
+ if (!behind_bridge) {
+ rc = shpchp_set_irq(func->bus, func->device, temp_byte + 0x09, IRQ);
+ if (rc)
+ return(1);
+ } else {
+ /* TBD - this code may also belong in the other clause of this If statement */
+ resources->irqs->interrupt[(temp_byte + resources->irqs->barber_pole - 1) & 0x03] = IRQ;
+ resources->irqs->valid_INT |= 0x01 << (temp_byte + resources->irqs->barber_pole - 1) & 0x03;
+ }
+#endif
+ /* Disable ROM base Address */
+ temp_word = 0x00L;
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_ROM_ADDRESS, temp_word);
+
+ /* Set HP parameters (Cache Line Size, Latency Timer) */
+ rc = shpchprm_set_hpp(ctrl, func, PCI_HEADER_TYPE_NORMAL);
+ if (rc)
+ return rc;
+
+ shpchprm_enable_card(ctrl, func, PCI_HEADER_TYPE_NORMAL);
+
+ dbg("PCI function Hot-Added s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, func->device, func->function);
+ } /* End of Not-A-Bridge else */
+ else {
+ /* It's some strange type of PCI adapter (Cardbus?) */
+ return(DEVICE_TYPE_NOT_SUPPORTED);
+ }
+
+ func->configured = 1;
+
+ return 0;
+}
+