diff options
Diffstat (limited to 'drivers/scsi/53c7xx_d.h_shipped')
| -rw-r--r-- | drivers/scsi/53c7xx_d.h_shipped | 2874 |
1 files changed, 2874 insertions, 0 deletions
diff --git a/drivers/scsi/53c7xx_d.h_shipped b/drivers/scsi/53c7xx_d.h_shipped new file mode 100644 index 000000000000..21d31b08ec31 --- /dev/null +++ b/drivers/scsi/53c7xx_d.h_shipped @@ -0,0 +1,2874 @@ +/* DO NOT EDIT - Generated automatically by script_asm.pl */ +static u32 SCRIPT[] = { +/* + + + + + +; 53c710 driver. Modified from Drew Eckhardts driver +; for 53c810 by Richard Hirst [richard@sleepie.demon.co.uk] +; +; I have left the script for the 53c8xx family in here, as it is likely +; to be useful to see what I changed when bug hunting. + +; NCR 53c810 driver, main script +; Sponsored by +; iX Multiuser Multitasking Magazine +; hm@ix.de +; +; Copyright 1993, 1994, 1995 Drew Eckhardt +; Visionary Computing +; (Unix and Linux consulting and custom programming) +; drew@PoohSticks.ORG +; +1 (303) 786-7975 +; +; TolerANT and SCSI SCRIPTS are registered trademarks of NCR Corporation. +; +; PRE-ALPHA +; +; For more information, please consult +; +; NCR 53C810 +; PCI-SCSI I/O Processor +; Data Manual +; +; NCR 53C710 +; SCSI I/O Processor +; Programmers Guide +; +; NCR Microelectronics +; 1635 Aeroplaza Drive +; Colorado Springs, CO 80916 +; 1+ (719) 578-3400 +; +; Toll free literature number +; +1 (800) 334-5454 +; +; IMPORTANT : This code is self modifying due to the limitations of +; the NCR53c7,8xx series chips. Persons debugging this code with +; the remote debugger should take this into account, and NOT set +; breakpoints in modified instructions. +; +; Design: +; The NCR53c7,8xx family of SCSI chips are busmasters with an onboard +; microcontroller using a simple instruction set. +; +; So, to minimize the effects of interrupt latency, and to maximize +; throughput, this driver offloads the practical maximum amount +; of processing to the SCSI chip while still maintaining a common +; structure. +; +; Where tradeoffs were needed between efficiency on the older +; chips and the newer NCR53c800 series, the NCR53c800 series +; was chosen. +; +; While the NCR53c700 and NCR53c700-66 lacked the facilities to fully +; automate SCSI transfers without host processor intervention, this +; isn't the case with the NCR53c710 and newer chips which allow +; +; - reads and writes to the internal registers from within the SCSI +; scripts, allowing the SCSI SCRIPTS(tm) code to save processor +; state so that multiple threads of execution are possible, and also +; provide an ALU for loop control, etc. +; +; - table indirect addressing for some instructions. This allows +; pointers to be located relative to the DSA ((Data Structure +; Address) register. +; +; These features make it possible to implement a mailbox style interface, +; where the same piece of code is run to handle I/O for multiple threads +; at once minimizing our need to relocate code. Since the NCR53c700/ +; NCR53c800 series have a unique combination of features, making a +; a standard ingoing/outgoing mailbox system, costly, I've modified it. +; +; - Mailboxes are a mixture of code and data. This lets us greatly +; simplify the NCR53c810 code and do things that would otherwise +; not be possible. +; +; The saved data pointer is now implemented as follows : +; +; Control flow has been architected such that if control reaches +; munge_save_data_pointer, on a restore pointers message or +; reconnection, a jump to the address formerly in the TEMP register +; will allow the SCSI command to resume execution. +; + +; +; Note : the DSA structures must be aligned on 32 bit boundaries, +; since the source and destination of MOVE MEMORY instructions +; must share the same alignment and this is the alignment of the +; NCR registers. +; + +; For some systems (MVME166, for example) dmode is always the same, so don't +; waste time writing it + + + + + + + + + + + +ABSOLUTE dsa_temp_lun = 0 ; Patch to lun for current dsa +ABSOLUTE dsa_temp_next = 0 ; Patch to dsa next for current dsa +ABSOLUTE dsa_temp_addr_next = 0 ; Patch to address of dsa next address + ; for current dsa +ABSOLUTE dsa_temp_sync = 0 ; Patch to address of per-target + ; sync routine +ABSOLUTE dsa_sscf_710 = 0 ; Patch to address of per-target + ; sscf value (53c710) +ABSOLUTE dsa_temp_target = 0 ; Patch to id for current dsa +ABSOLUTE dsa_temp_addr_saved_pointer = 0; Patch to address of per-command + ; saved data pointer +ABSOLUTE dsa_temp_addr_residual = 0 ; Patch to address of per-command + ; current residual code +ABSOLUTE dsa_temp_addr_saved_residual = 0; Patch to address of per-command + ; saved residual code +ABSOLUTE dsa_temp_addr_new_value = 0 ; Address of value for JUMP operand +ABSOLUTE dsa_temp_addr_array_value = 0 ; Address to copy to +ABSOLUTE dsa_temp_addr_dsa_value = 0 ; Address of this DSA value + +; +; Once a device has initiated reselection, we need to compare it +; against the singly linked list of commands which have disconnected +; and are pending reselection. These commands are maintained in +; an unordered singly linked list of DSA structures, through the +; DSA pointers at their 'centers' headed by the reconnect_dsa_head +; pointer. +; +; To avoid complications in removing commands from the list, +; I minimize the amount of expensive (at eight operations per +; addition @ 500-600ns each) pointer operations which must +; be done in the NCR driver by precomputing them on the +; host processor during dsa structure generation. +; +; The fixed-up per DSA code knows how to recognize the nexus +; associated with the corresponding SCSI command, and modifies +; the source and destination pointers for the MOVE MEMORY +; instruction which is executed when reselected_ok is called +; to remove the command from the list. Similarly, DSA is +; loaded with the address of the next DSA structure and +; reselected_check_next is called if a failure occurs. +; +; Perhaps more concisely, the net effect of the mess is +; +; for (dsa = reconnect_dsa_head, dest = &reconnect_dsa_head, +; src = NULL; dsa; dest = &dsa->next, dsa = dsa->next) { +; src = &dsa->next; +; if (target_id == dsa->id && target_lun == dsa->lun) { +; *dest = *src; +; break; +; } +; } +; +; if (!dsa) +; error (int_err_unexpected_reselect); +; else +; longjmp (dsa->jump_resume, 0); +; +; + + +; Define DSA structure used for mailboxes +ENTRY dsa_code_template +dsa_code_template: +ENTRY dsa_code_begin +dsa_code_begin: +; RGH: Don't care about TEMP and DSA here + + MOVE MEMORY 4, dsa_temp_addr_dsa_value, addr_scratch + +at 0x00000000 : */ 0xc0000004,0x00000000,0x00000000, +/* + + + MOVE MEMORY 4, addr_scratch, saved_dsa + +at 0x00000003 : */ 0xc0000004,0x00000000,0x00000000, +/* + ; We are about to go and select the device, so must set SSCF bits + MOVE MEMORY 4, dsa_sscf_710, addr_scratch + +at 0x00000006 : */ 0xc0000004,0x00000000,0x00000000, +/* + + MOVE SCRATCH3 TO SFBR + +at 0x00000009 : */ 0x72370000,0x00000000, +/* + + + + MOVE SFBR TO SBCL + +at 0x0000000b : */ 0x6a0b0000,0x00000000, +/* + MOVE MEMORY 4, saved_dsa, addr_dsa + +at 0x0000000d : */ 0xc0000004,0x00000000,0x00000000, +/* + + + + CALL select + +at 0x00000010 : */ 0x88080000,0x000001f8, +/* +; Handle the phase mismatch which may have resulted from the +; MOVE FROM dsa_msgout if we returned here. The CLEAR ATN +; may or may not be necessary, and we should update script_asm.pl +; to handle multiple pieces. + CLEAR ATN + +at 0x00000012 : */ 0x60000008,0x00000000, +/* + CLEAR ACK + +at 0x00000014 : */ 0x60000040,0x00000000, +/* + +; Replace second operand with address of JUMP instruction dest operand +; in schedule table for this DSA. Becomes dsa_jump_dest in 53c7,8xx.c. +ENTRY dsa_code_fix_jump +dsa_code_fix_jump: + MOVE MEMORY 4, NOP_insn, 0 + +at 0x00000016 : */ 0xc0000004,0x00000000,0x00000000, +/* + JUMP select_done + +at 0x00000019 : */ 0x80080000,0x00000230, +/* + +; wrong_dsa loads the DSA register with the value of the dsa_next +; field. +; +wrong_dsa: + +; NOTE DSA is corrupt when we arrive here! + +; Patch the MOVE MEMORY INSTRUCTION such that +; the destination address is the address of the OLD +; next pointer. +; + MOVE MEMORY 4, dsa_temp_addr_next, reselected_ok_patch + 8 + +at 0x0000001b : */ 0xc0000004,0x00000000,0x000007ec, +/* + +; +; Move the _contents_ of the next pointer into the DSA register as +; the next I_T_L or I_T_L_Q tupple to check against the established +; nexus. +; + MOVE MEMORY 4, dsa_temp_next, addr_scratch + +at 0x0000001e : */ 0xc0000004,0x00000000,0x00000000, +/* + + + MOVE MEMORY 4, addr_scratch, saved_dsa + +at 0x00000021 : */ 0xc0000004,0x00000000,0x00000000, +/* + MOVE MEMORY 4, saved_dsa, addr_dsa + +at 0x00000024 : */ 0xc0000004,0x00000000,0x00000000, +/* + + + + JUMP reselected_check_next + +at 0x00000027 : */ 0x80080000,0x000006f0, +/* + +ABSOLUTE dsa_save_data_pointer = 0 +ENTRY dsa_code_save_data_pointer +dsa_code_save_data_pointer: + + ; When we get here, TEMP has been saved in jump_temp+4, DSA is corrupt + ; We MUST return with DSA correct + MOVE MEMORY 4, jump_temp+4, dsa_temp_addr_saved_pointer + +at 0x00000029 : */ 0xc0000004,0x000009c8,0x00000000, +/* +; HARD CODED : 24 bytes needs to agree with 53c7,8xx.h + MOVE MEMORY 24, dsa_temp_addr_residual, dsa_temp_addr_saved_residual + +at 0x0000002c : */ 0xc0000018,0x00000000,0x00000000, +/* + CLEAR ACK + +at 0x0000002f : */ 0x60000040,0x00000000, +/* + + + + MOVE MEMORY 4, saved_dsa, addr_dsa + +at 0x00000031 : */ 0xc0000004,0x00000000,0x00000000, +/* + JUMP jump_temp + +at 0x00000034 : */ 0x80080000,0x000009c4, +/* + +ABSOLUTE dsa_restore_pointers = 0 +ENTRY dsa_code_restore_pointers +dsa_code_restore_pointers: + + ; TEMP and DSA are corrupt when we get here, but who cares! + MOVE MEMORY 4, dsa_temp_addr_saved_pointer, jump_temp + 4 + +at 0x00000036 : */ 0xc0000004,0x00000000,0x000009c8, +/* +; HARD CODED : 24 bytes needs to agree with 53c7,8xx.h + MOVE MEMORY 24, dsa_temp_addr_saved_residual, dsa_temp_addr_residual + +at 0x00000039 : */ 0xc0000018,0x00000000,0x00000000, +/* + CLEAR ACK + +at 0x0000003c : */ 0x60000040,0x00000000, +/* + ; Restore DSA, note we don't care about TEMP + MOVE MEMORY 4, saved_dsa, addr_dsa + +at 0x0000003e : */ 0xc0000004,0x00000000,0x00000000, +/* + + + + JUMP jump_temp + +at 0x00000041 : */ 0x80080000,0x000009c4, +/* + + +ABSOLUTE dsa_check_reselect = 0 +; dsa_check_reselect determines whether or not the current target and +; lun match the current DSA +ENTRY dsa_code_check_reselect +dsa_code_check_reselect: + + + + MOVE LCRC TO SFBR ; LCRC has our ID and his ID bits set + +at 0x00000043 : */ 0x72230000,0x00000000, +/* + JUMP REL (wrong_dsa), IF NOT dsa_temp_target, AND MASK 0x80 + +at 0x00000045 : */ 0x80848000,0x00ffff50, +/* + + + + + +; +; Hack - move to scratch first, since SFBR is not writeable +; via the CPU and hence a MOVE MEMORY instruction. +; + + MOVE MEMORY 1, reselected_identify, addr_scratch + +at 0x00000047 : */ 0xc0000001,0x00000000,0x00000000, +/* + + + ; BIG ENDIAN ON MVME16x + MOVE SCRATCH3 TO SFBR + +at 0x0000004a : */ 0x72370000,0x00000000, +/* + + + +; FIXME : we need to accommodate bit fielded and binary here for '7xx/'8xx chips +; Are you sure about that? richard@sleepie.demon.co.uk + JUMP REL (wrong_dsa), IF NOT dsa_temp_lun, AND MASK 0xf8 + +at 0x0000004c : */ 0x8084f800,0x00ffff34, +/* +; Patch the MOVE MEMORY INSTRUCTION such that +; the source address is the address of this dsa's +; next pointer. + MOVE MEMORY 4, dsa_temp_addr_next, reselected_ok_patch + 4 + +at 0x0000004e : */ 0xc0000004,0x00000000,0x000007e8, +/* + CALL reselected_ok + +at 0x00000051 : */ 0x88080000,0x00000798, +/* + +; Restore DSA following memory moves in reselected_ok +; dsa_temp_sync doesn't really care about DSA, but it has an +; optional debug INT so a valid DSA is a good idea. + MOVE MEMORY 4, saved_dsa, addr_dsa + +at 0x00000053 : */ 0xc0000004,0x00000000,0x00000000, +/* + + CALL dsa_temp_sync + +at 0x00000056 : */ 0x88080000,0x00000000, +/* +; Release ACK on the IDENTIFY message _after_ we've set the synchronous +; transfer parameters! + CLEAR ACK + +at 0x00000058 : */ 0x60000040,0x00000000, +/* +; Implicitly restore pointers on reselection, so a RETURN +; will transfer control back to the right spot. + CALL REL (dsa_code_restore_pointers) + +at 0x0000005a : */ 0x88880000,0x00ffff68, +/* + RETURN + +at 0x0000005c : */ 0x90080000,0x00000000, +/* +ENTRY dsa_zero +dsa_zero: +ENTRY dsa_code_template_end +dsa_code_template_end: + +; Perform sanity check for dsa_fields_start == dsa_code_template_end - +; dsa_zero, puke. + +ABSOLUTE dsa_fields_start = 0 ; Sanity marker + ; pad 48 bytes (fix this RSN) +ABSOLUTE dsa_next = 48 ; len 4 Next DSA + ; del 4 Previous DSA address +ABSOLUTE dsa_cmnd = 56 ; len 4 Scsi_Cmnd * for this thread. +ABSOLUTE dsa_select = 60 ; len 4 Device ID, Period, Offset for + ; table indirect select +ABSOLUTE dsa_msgout = 64 ; len 8 table indirect move parameter for + ; select message +ABSOLUTE dsa_cmdout = 72 ; len 8 table indirect move parameter for + ; command +ABSOLUTE dsa_dataout = 80 ; len 4 code pointer for dataout +ABSOLUTE dsa_datain = 84 ; len 4 code pointer for datain +ABSOLUTE dsa_msgin = 88 ; len 8 table indirect move for msgin +ABSOLUTE dsa_status = 96 ; len 8 table indirect move for status byte +ABSOLUTE dsa_msgout_other = 104 ; len 8 table indirect for normal message out + ; (Synchronous transfer negotiation, etc). +ABSOLUTE dsa_end = 112 + +ABSOLUTE schedule = 0 ; Array of JUMP dsa_begin or JUMP (next), + ; terminated by a call to JUMP wait_reselect + +; Linked lists of DSA structures +ABSOLUTE reconnect_dsa_head = 0 ; Link list of DSAs which can reconnect +ABSOLUTE addr_reconnect_dsa_head = 0 ; Address of variable containing + ; address of reconnect_dsa_head + +; These select the source and destination of a MOVE MEMORY instruction +ABSOLUTE dmode_memory_to_memory = 0x0 +ABSOLUTE dmode_memory_to_ncr = 0x0 +ABSOLUTE dmode_ncr_to_memory = 0x0 + +ABSOLUTE addr_scratch = 0x0 +ABSOLUTE addr_temp = 0x0 + +ABSOLUTE saved_dsa = 0x0 +ABSOLUTE emulfly = 0x0 +ABSOLUTE addr_dsa = 0x0 + + + +; Interrupts - +; MSB indicates type +; 0 handle error condition +; 1 handle message +; 2 handle normal condition +; 3 debugging interrupt +; 4 testing interrupt +; Next byte indicates specific error + +; XXX not yet implemented, I'm not sure if I want to - +; Next byte indicates the routine the error occurred in +; The LSB indicates the specific place the error occurred + +ABSOLUTE int_err_unexpected_phase = 0x00000000 ; Unexpected phase encountered +ABSOLUTE int_err_selected = 0x00010000 ; SELECTED (nee RESELECTED) +ABSOLUTE int_err_unexpected_reselect = 0x00020000 +ABSOLUTE int_err_check_condition = 0x00030000 +ABSOLUTE int_err_no_phase = 0x00040000 +ABSOLUTE int_msg_wdtr = 0x01000000 ; WDTR message received +ABSOLUTE int_msg_sdtr = 0x01010000 ; SDTR received +ABSOLUTE int_msg_1 = 0x01020000 ; single byte special message + ; received + +ABSOLUTE int_norm_select_complete = 0x02000000 ; Select complete, reprogram + ; registers. +ABSOLUTE int_norm_reselect_complete = 0x02010000 ; Nexus established +ABSOLUTE int_norm_command_complete = 0x02020000 ; Command complete +ABSOLUTE int_norm_disconnected = 0x02030000 ; Disconnected +ABSOLUTE int_norm_aborted =0x02040000 ; Aborted *dsa +ABSOLUTE int_norm_reset = 0x02050000 ; Generated BUS reset. +ABSOLUTE int_norm_emulateintfly = 0x02060000 ; 53C710 Emulated intfly +ABSOLUTE int_debug_break = 0x03000000 ; Break point + +ABSOLUTE int_debug_panic = 0x030b0000 ; Panic driver + + +ABSOLUTE int_test_1 = 0x04000000 ; Test 1 complete +ABSOLUTE int_test_2 = 0x04010000 ; Test 2 complete +ABSOLUTE int_test_3 = 0x04020000 ; Test 3 complete + + +; These should start with 0x05000000, with low bits incrementing for +; each one. + + + +ABSOLUTE NCR53c7xx_msg_abort = 0 ; Pointer to abort message +ABSOLUTE NCR53c7xx_msg_reject = 0 ; Pointer to reject message +ABSOLUTE NCR53c7xx_zero = 0 ; long with zero in it, use for source +ABSOLUTE NCR53c7xx_sink = 0 ; long to dump worthless data in +ABSOLUTE NOP_insn = 0 ; NOP instruction + +; Pointer to message, potentially multi-byte +ABSOLUTE msg_buf = 0 + +; Pointer to holding area for reselection information +ABSOLUTE reselected_identify = 0 +ABSOLUTE reselected_tag = 0 + +; Request sense command pointer, it's a 6 byte command, should +; be constant for all commands since we always want 16 bytes of +; sense and we don't need to change any fields as we did under +; SCSI-I when we actually cared about the LUN field. +;EXTERNAL NCR53c7xx_sense ; Request sense command + + +; dsa_schedule +; PURPOSE : after a DISCONNECT message has been received, and pointers +; saved, insert the current DSA structure at the head of the +; disconnected queue and fall through to the scheduler. +; +; CALLS : OK +; +; INPUTS : dsa - current DSA structure, reconnect_dsa_head - list +; of disconnected commands +; +; MODIFIES : SCRATCH, reconnect_dsa_head +; +; EXITS : always passes control to schedule + +ENTRY dsa_schedule +dsa_schedule: + + + + +; +; Calculate the address of the next pointer within the DSA +; structure of the command that is currently disconnecting +; + + ; Read what should be the current DSA from memory - actual DSA + ; register is probably corrupt + MOVE MEMORY 4, saved_dsa, addr_scratch + +at 0x0000005e : */ 0xc0000004,0x00000000,0x00000000, +/* + + + + MOVE SCRATCH0 + dsa_next TO SCRATCH0 + +at 0x00000061 : */ 0x7e343000,0x00000000, +/* + MOVE SCRATCH1 + 0 TO SCRATCH1 WITH CARRY + +at 0x00000063 : */ 0x7f350000,0x00000000, +/* + MOVE SCRATCH2 + 0 TO SCRATCH2 WITH CARRY + +at 0x00000065 : */ 0x7f360000,0x00000000, +/* + MOVE SCRATCH3 + 0 TO SCRATCH3 WITH CARRY + +at 0x00000067 : */ 0x7f370000,0x00000000, +/* + +; Point the next field of this DSA structure at the current disconnected +; list + + MOVE MEMORY 4, addr_scratch, dsa_schedule_insert + 8 + +at 0x00000069 : */ 0xc0000004,0x00000000,0x000001b8, +/* + +dsa_schedule_insert: + MOVE MEMORY 4, reconnect_dsa_head, 0 + +at 0x0000006c : */ 0xc0000004,0x00000000,0x00000000, +/* + +; And update the head pointer. + + ; Read what should be the current DSA from memory - actual DSA + ; register is probably corrupt + MOVE MEMORY 4, saved_dsa, addr_scratch + +at 0x0000006f : */ 0xc0000004,0x00000000,0x00000000, +/* + + + + + MOVE MEMORY 4, addr_scratch, reconnect_dsa_head + +at 0x00000072 : */ 0xc0000004,0x00000000,0x00000000, +/* + + + + + + + CLEAR ACK + +at 0x00000075 : */ 0x60000040,0x00000000, +/* + + + ; Time to correct DSA following memory move + MOVE MEMORY 4, saved_dsa, addr_dsa + +at 0x00000077 : */ 0xc0000004,0x00000000,0x00000000, +/* + + WAIT DISCONNECT + +at 0x0000007a : */ 0x48000000,0x00000000, +/* + + + + + + + JUMP schedule + +at 0x0000007c : */ 0x80080000,0x00000000, +/* + + +; +; select +; +; PURPOSE : establish a nexus for the SCSI command referenced by DSA. +; On success, the current DSA structure is removed from the issue +; queue. Usually, this is entered as a fall-through from schedule, +; although the contingent allegiance handling code will write +; the select entry address to the DSP to restart a command as a +; REQUEST SENSE. A message is sent (usually IDENTIFY, although +; additional SDTR or WDTR messages may be sent). COMMAND OUT +; is handled. +; +; INPUTS : DSA - SCSI command, issue_dsa_head +; +; CALLS : NOT OK +; +; MODIFIES : SCRATCH, issue_dsa_head +; +; EXITS : on reselection or selection, go to select_failed +; otherwise, RETURN so control is passed back to +; dsa_begin. +; + +ENTRY select +select: + + + + + + + + + CLEAR TARGET + +at 0x0000007e : */ 0x60000200,0x00000000, +/* + +; XXX +; +; In effect, SELECTION operations are backgrounded, with execution +; continuing until code which waits for REQ or a fatal interrupt is +; encountered. +; +; So, for more performance, we could overlap the code which removes +; the command from the NCRs issue queue with the selection, but +; at this point I don't want to deal with the error recovery. +; + + + + ; Enable selection timer + + + + MOVE CTEST7 & 0xef TO CTEST7 + +at 0x00000080 : */ 0x7c1bef00,0x00000000, +/* + + + SELECT ATN FROM dsa_select, select_failed + +at 0x00000082 : */ 0x4300003c,0x00000828, +/* + JUMP select_msgout, WHEN MSG_OUT + +at 0x00000084 : */ 0x860b0000,0x00000218, +/* +ENTRY select_msgout +select_msgout: + + ; Disable selection timer + MOVE CTEST7 | 0x10 TO CTEST7 + +at 0x00000086 : */ 0x7a1b1000,0x00000000, +/* + + MOVE FROM dsa_msgout, WHEN MSG_OUT + +at 0x00000088 : */ 0x1e000000,0x00000040, +/* + + + + + + + + + + + RETURN + +at 0x0000008a : */ 0x90080000,0x00000000, +/* + +; +; select_done +; +; PURPOSE: continue on to normal data transfer; called as the exit +; point from dsa_begin. +; +; INPUTS: dsa +; +; CALLS: OK +; +; + +select_done: + +; NOTE DSA is corrupt when we arrive here! + MOVE MEMORY 4, saved_dsa, addr_dsa + +at 0x0000008c : */ 0xc0000004,0x00000000,0x00000000, +/* + + + + + + + + +; After a successful selection, we should get either a CMD phase or +; some transfer request negotiation message. + + JUMP cmdout, WHEN CMD + +at 0x0000008f : */ 0x820b0000,0x0000025c, +/* + INT int_err_unexpected_phase, WHEN NOT MSG_IN + +at 0x00000091 : */ 0x9f030000,0x00000000, +/* + +select_msg_in: + CALL msg_in, WHEN MSG_IN + +at 0x00000093 : */ 0x8f0b0000,0x0000041c, +/* + JUMP select_msg_in, WHEN MSG_IN + +at 0x00000095 : */ 0x870b0000,0x0000024c, +/* + +cmdout: + INT int_err_unexpected_phase, WHEN NOT CMD + +at 0x00000097 : */ 0x9a030000,0x00000000, +/* + + + +ENTRY cmdout_cmdout +cmdout_cmdout: + + MOVE FROM dsa_cmdout, WHEN CMD + +at 0x00000099 : */ 0x1a000000,0x00000048, +/* + + + + +; +; data_transfer +; other_out +; other_in +; other_transfer +; +; PURPOSE : handle the main data transfer for a SCSI command in +; several parts. In the first part, data_transfer, DATA_IN +; and DATA_OUT phases are allowed, with the user provided +; code (usually dynamically generated based on the scatter/gather +; list associated with a SCSI command) called to handle these +; phases. +; +; After control has passed to one of the user provided +; DATA_IN or DATA_OUT routines, back calls are made to +; other_transfer_in or other_transfer_out to handle non-DATA IN +; and DATA OUT phases respectively, with the state of the active +; data pointer being preserved in TEMP. +; +; On completion, the user code passes control to other_transfer +; which causes DATA_IN and DATA_OUT to result in unexpected_phase +; interrupts so that data overruns may be trapped. +; +; INPUTS : DSA - SCSI command +; +; CALLS : OK in data_transfer_start, not ok in other_out and other_in, ok in +; other_transfer +; +; MODIFIES : SCRATCH +; +; EXITS : if STATUS IN is detected, signifying command completion, +; the NCR jumps to command_complete. If MSG IN occurs, a +; CALL is made to msg_in. Otherwise, other_transfer runs in +; an infinite loop. +; + +ENTRY data_transfer +data_transfer: + JUMP cmdout_cmdout, WHEN CMD + +at 0x0000009b : */ 0x820b0000,0x00000264, +/* + CALL msg_in, WHEN MSG_IN + +at 0x0000009d : */ 0x8f0b0000,0x0000041c, +/* + INT int_err_unexpected_phase, WHEN MSG_OUT + +at 0x0000009f : */ 0x9e0b0000,0x00000000, +/* + JUMP do_dataout, WHEN DATA_OUT + +at 0x000000a1 : */ 0x800b0000,0x000002a4, +/* + JUMP do_datain, WHEN DATA_IN + +at 0x000000a3 : */ 0x810b0000,0x000002fc, +/* + JUMP command_complete, WHEN STATUS + +at 0x000000a5 : */ 0x830b0000,0x0000065c, +/* + JUMP data_transfer + +at 0x000000a7 : */ 0x80080000,0x0000026c, +/* +ENTRY end_data_transfer +end_data_transfer: + +; +; FIXME: On NCR53c700 and NCR53c700-66 chips, do_dataout/do_datain +; should be fixed up whenever the nexus changes so it can point to the +; correct routine for that command. +; + + +; Nasty jump to dsa->dataout +do_dataout: + + MOVE MEMORY 4, saved_dsa, addr_scratch + +at 0x000000a9 : */ 0xc0000004,0x00000000,0x00000000, +/* + + + + MOVE SCRATCH0 + dsa_dataout TO SCRATCH0 + +at 0x000000ac : */ 0x7e345000,0x00000000, +/* + MOVE SCRATCH1 + 0 TO SCRATCH1 WITH CARRY + +at 0x000000ae : */ 0x7f350000,0x00000000, +/* + MOVE SCRATCH2 + 0 TO SCRATCH2 WITH CARRY + +at 0x000000b0 : */ 0x7f360000,0x00000000, +/* + MOVE SCRATCH3 + 0 TO SCRATCH3 WITH CARRY + +at 0x000000b2 : */ 0x7f370000,0x00000000, +/* + + MOVE MEMORY 4, addr_scratch, dataout_to_jump + 4 + +at 0x000000b4 : */ 0xc0000004,0x00000000,0x000002e0, +/* + +dataout_to_jump: + MOVE MEMORY 4, 0, dataout_jump + 4 + +at 0x000000b7 : */ 0xc0000004,0x00000000,0x000002f8, +/* + + ; Time to correct DSA following memory move + MOVE MEMORY 4, saved_dsa, addr_dsa + +at 0x000000ba : */ 0xc0000004,0x00000000,0x00000000, +/* + +dataout_jump: + JUMP 0 + +at 0x000000bd : */ 0x80080000,0x00000000, +/* + +; Nasty jump to dsa->dsain +do_datain: + + MOVE MEMORY 4, saved_dsa, addr_scratch + +at 0x000000bf : */ 0xc0000004,0x00000000,0x00000000, +/* + + + + MOVE SCRATCH0 + dsa_datain TO SCRATCH0 + +at 0x000000c2 : */ 0x7e345400,0x00000000, +/* + MOVE SCRATCH1 + 0 TO SCRATCH1 WITH CARRY + +at 0x000000c4 : */ 0x7f350000,0x00000000, +/* + MOVE SCRATCH2 + 0 TO SCRATCH2 WITH CARRY + +at 0x000000c6 : */ 0x7f360000,0x00000000, +/* + MOVE SCRATCH3 + 0 TO SCRATCH3 WITH CARRY + +at 0x000000c8 : */ 0x7f370000,0x00000000, +/* + + MOVE MEMORY 4, addr_scratch, datain_to_jump + 4 + +at 0x000000ca : */ 0xc0000004,0x00000000,0x00000338, +/* + +ENTRY datain_to_jump +datain_to_jump: + MOVE MEMORY 4, 0, datain_jump + 4 + +at 0x000000cd : */ 0xc0000004,0x00000000,0x00000350, +/* + + ; Time to correct DSA following memory move + MOVE MEMORY 4, saved_dsa, addr_dsa + +at 0x000000d0 : */ 0xc0000004,0x00000000,0x00000000, +/* + + + + +datain_jump: + JUMP 0 + +at 0x000000d3 : */ 0x80080000,0x00000000, +/* + + + +; Note that other_out and other_in loop until a non-data phase +; is discovered, so we only execute return statements when we +; can go on to the next data phase block move statement. + +ENTRY other_out +other_out: + + + + INT int_err_unexpected_phase, WHEN CMD + +at 0x000000d5 : */ 0x9a0b0000,0x00000000, +/* + JUMP msg_in_restart, WHEN MSG_IN + +at 0x000000d7 : */ 0x870b0000,0x000003fc, +/* + INT int_err_unexpected_phase, WHEN MSG_OUT + +at 0x000000d9 : */ 0x9e0b0000,0x00000000, +/* + INT int_err_unexpected_phase, WHEN DATA_IN + +at 0x000000db : */ 0x990b0000,0x00000000, +/* + JUMP command_complete, WHEN STATUS + +at 0x000000dd : */ 0x830b0000,0x0000065c, +/* + JUMP other_out, WHEN NOT DATA_OUT + +at 0x000000df : */ 0x80030000,0x00000354, +/* + +; TEMP should be OK, as we got here from a call in the user dataout code. + + RETURN + +at 0x000000e1 : */ 0x90080000,0x00000000, +/* + +ENTRY other_in +other_in: + + + + INT int_err_unexpected_phase, WHEN CMD + +at 0x000000e3 : */ 0x9a0b0000,0x00000000, +/* + JUMP msg_in_restart, WHEN MSG_IN + +at 0x000000e5 : */ 0x870b0000,0x000003fc, +/* + INT int_err_unexpected_phase, WHEN MSG_OUT + +at 0x000000e7 : */ 0x9e0b0000,0x00000000, +/* + INT int_err_unexpected_phase, WHEN DATA_OUT + +at 0x000000e9 : */ 0x980b0000,0x00000000, +/* + JUMP command_complete, WHEN STATUS + +at 0x000000eb : */ 0x830b0000,0x0000065c, +/* + JUMP other_in, WHEN NOT DATA_IN + +at 0x000000ed : */ 0x81030000,0x0000038c, +/* + +; TEMP should be OK, as we got here from a call in the user datain code. + + RETURN + +at 0x000000ef : */ 0x90080000,0x00000000, +/* + + +ENTRY other_transfer +other_transfer: + INT int_err_unexpected_phase, WHEN CMD + +at 0x000000f1 : */ 0x9a0b0000,0x00000000, +/* + CALL msg_in, WHEN MSG_IN + +at 0x000000f3 : */ 0x8f0b0000,0x0000041c, +/* + INT int_err_unexpected_phase, WHEN MSG_OUT + +at 0x000000f5 : */ 0x9e0b0000,0x00000000, +/* + INT int_err_unexpected_phase, WHEN DATA_OUT + +at 0x000000f7 : */ 0x980b0000,0x00000000, +/* + INT int_err_unexpected_phase, WHEN DATA_IN + +at 0x000000f9 : */ 0x990b0000,0x00000000, +/* + JUMP command_complete, WHEN STATUS + +at 0x000000fb : */ 0x830b0000,0x0000065c, +/* + JUMP other_transfer + +at 0x000000fd : */ 0x80080000,0x000003c4, +/* + +; +; msg_in_restart +; msg_in +; munge_msg +; +; PURPOSE : process messages from a target. msg_in is called when the +; caller hasn't read the first byte of the message. munge_message +; is called when the caller has read the first byte of the message, +; and left it in SFBR. msg_in_restart is called when the caller +; hasn't read the first byte of the message, and wishes RETURN +; to transfer control back to the address of the conditional +; CALL instruction rather than to the instruction after it. +; +; Various int_* interrupts are generated when the host system +; needs to intervene, as is the case with SDTR, WDTR, and +; INITIATE RECOVERY messages. +; +; When the host system handles one of these interrupts, +; it can respond by reentering at reject_message, +; which rejects the message and returns control to +; the caller of msg_in or munge_msg, accept_message +; which clears ACK and returns control, or reply_message +; which sends the message pointed to by the DSA +; msgout_other table indirect field. +; +; DISCONNECT messages are handled by moving the command +; to the reconnect_dsa_queue. + +; NOTE: DSA should be valid when we get here - we cannot save both it +; and TEMP in this routine. + +; +; INPUTS : DSA - SCSI COMMAND, SFBR - first byte of message (munge_msg +; only) +; +; CALLS : NO. The TEMP register isn't backed up to allow nested calls. +; +; MODIFIES : SCRATCH, DSA on DISCONNECT +; +; EXITS : On receipt of SAVE DATA POINTER, RESTORE POINTERS, +; and normal return from message handlers running under +; Linux, control is returned to the caller. Receipt +; of DISCONNECT messages pass control to dsa_schedule. +; +ENTRY msg_in_restart +msg_in_restart: +; XXX - hackish +; +; Since it's easier to debug changes to the statically +; compiled code, rather than the dynamically generated +; stuff, such as +; +; MOVE x, y, WHEN data_phase +; CALL other_z, WHEN NOT data_phase +; MOVE x, y, WHEN data_phase +; +; I'd like to have certain routines (notably the message handler) +; restart on the conditional call rather than the next instruction. +; +; So, subtract 8 from the return address + + MOVE TEMP0 + 0xf8 TO TEMP0 + +at 0x000000ff : */ 0x7e1cf800,0x00000000, +/* + MOVE TEMP1 + 0xff TO TEMP1 WITH CARRY + +at 0x00000101 : */ 0x7f1dff00,0x00000000, +/* + MOVE TEMP2 + 0xff TO TEMP2 WITH CARRY + +at 0x00000103 : */ 0x7f1eff00,0x00000000, +/* + MOVE TEMP3 + 0xff TO TEMP3 WITH CARRY + +at 0x00000105 : */ 0x7f1fff00,0x00000000, +/* + +ENTRY msg_in +msg_in: + MOVE 1, msg_buf, WHEN MSG_IN + +at 0x00000107 : */ 0x0f000001,0x00000000, +/* + +munge_msg: + JUMP munge_extended, IF 0x01 ; EXTENDED MESSAGE + +at 0x00000109 : */ 0x800c0001,0x00000574, +/* + JUMP munge_2, IF 0x20, AND MASK 0xdf ; two byte message + +at 0x0000010b : */ 0x800cdf20,0x00000464, +/* +; +; XXX - I've seen a handful of broken SCSI devices which fail to issue +; a SAVE POINTERS message before disconnecting in the middle of +; a transfer, assuming that the DATA POINTER will be implicitly +; restored. +; +; Historically, I've often done an implicit save when the DISCONNECT +; message is processed. We may want to consider having the option of +; doing that here. +; + JUMP munge_save_data_pointer, IF 0x02 ; SAVE DATA POINTER + +at 0x0000010d : */ 0x800c0002,0x0000046c, +/* + JUMP munge_restore_pointers, IF 0x03 ; RESTORE POINTERS + +at 0x0000010f : */ 0x800c0003,0x00000518, +/* + JUMP munge_disconnect, IF 0x04 ; DISCONNECT + +at 0x00000111 : */ 0x800c0004,0x0000056c, +/* + INT int_msg_1, IF 0x07 ; MESSAGE REJECT + +at 0x00000113 : */ 0x980c0007,0x01020000, +/* + INT int_msg_1, IF 0x0f ; INITIATE RECOVERY + +at 0x00000115 : */ 0x980c000f,0x01020000, +/* + + + + JUMP reject_message + +at 0x00000117 : */ 0x80080000,0x00000604, +/* + +munge_2: + JUMP reject_message + +at 0x00000119 : */ 0x80080000,0x00000604, +/* +; +; The SCSI standard allows targets to recover from transient +; error conditions by backing up the data pointer with a +; RESTORE POINTERS message. +; +; So, we must save and restore the _residual_ code as well as +; the current instruction pointer. Because of this messiness, +; it is simpler to put dynamic code in the dsa for this and to +; just do a simple jump down there. +; + +munge_save_data_pointer: + + ; We have something in TEMP here, so first we must save that + MOVE TEMP0 TO SFBR + +at 0x0000011b : */ 0x721c0000,0x00000000, +/* + MOVE SFBR TO SCRATCH0 + +at 0x0000011d : */ 0x6a340000,0x00000000, +/* + MOVE TEMP1 TO SFBR + +at 0x0000011f : */ 0x721d0000,0x00000000, +/* + MOVE SFBR TO SCRATCH1 + +at 0x00000121 : */ 0x6a350000,0x00000000, +/* + MOVE TEMP2 TO SFBR + +at 0x00000123 : */ 0x721e0000,0x00000000, +/* + MOVE SFBR TO SCRATCH2 + +at 0x00000125 : */ 0x6a360000,0x00000000, +/* + MOVE TEMP3 TO SFBR + +at 0x00000127 : */ 0x721f0000,0x00000000, +/* + MOVE SFBR TO SCRATCH3 + +at 0x00000129 : */ 0x6a370000,0x00000000, +/* + MOVE MEMORY 4, addr_scratch, jump_temp + 4 + +at 0x0000012b : */ 0xc0000004,0x00000000,0x000009c8, +/* + ; Now restore DSA + MOVE MEMORY 4, saved_dsa, addr_dsa + +at 0x0000012e : */ 0xc0000004,0x00000000,0x00000000, +/* + + MOVE DSA0 + dsa_save_data_pointer TO SFBR + +at 0x00000131 : */ 0x76100000,0x00000000, +/* + MOVE SFBR TO SCRATCH0 + +at 0x00000133 : */ 0x6a340000,0x00000000, +/* + MOVE DSA1 + 0xff TO SFBR WITH CARRY + +at 0x00000135 : */ 0x7711ff00,0x00000000, +/* + MOVE SFBR TO SCRATCH1 + +at 0x00000137 : */ 0x6a350000,0x00000000, +/* + MOVE DSA2 + 0xff TO SFBR WITH CARRY + +at 0x00000139 : */ 0x7712ff00,0x00000000, +/* + MOVE SFBR TO SCRATCH2 + +at 0x0000013b : */ 0x6a360000,0x00000000, +/* + MOVE DSA3 + 0xff TO SFBR WITH CARRY + +at 0x0000013d : */ 0x7713ff00,0x00000000, +/* + MOVE SFBR TO SCRATCH3 + +at 0x0000013f : */ 0x6a370000,0x00000000, +/* + + + MOVE MEMORY 4, addr_scratch, jump_dsa_save + 4 + +at 0x00000141 : */ 0xc0000004,0x00000000,0x00000514, +/* + +jump_dsa_save: + JUMP 0 + +at 0x00000144 : */ 0x80080000,0x00000000, +/* + +munge_restore_pointers: + + ; The code at dsa_restore_pointers will RETURN, but we don't care + ; about TEMP here, as it will overwrite it anyway. + + MOVE DSA0 + dsa_restore_pointers TO SFBR + +at 0x00000146 : */ 0x76100000,0x00000000, +/* + MOVE SFBR TO SCRATCH0 + +at 0x00000148 : */ 0x6a340000,0x00000000, +/* + MOVE DSA1 + 0xff TO SFBR WITH CARRY + +at 0x0000014a : */ 0x7711ff00,0x00000000, +/* + MOVE SFBR TO SCRATCH1 + +at 0x0000014c : */ 0x6a350000,0x00000000, +/* + MOVE DSA2 + 0xff TO SFBR WITH CARRY + +at 0x0000014e : */ 0x7712ff00,0x00000000, +/* + MOVE SFBR TO SCRATCH2 + +at 0x00000150 : */ 0x6a360000,0x00000000, +/* + MOVE DSA3 + 0xff TO SFBR WITH CARRY + +at 0x00000152 : */ 0x7713ff00,0x00000000, +/* + MOVE SFBR TO SCRATCH3 + +at 0x00000154 : */ 0x6a370000,0x00000000, +/* + + + MOVE MEMORY 4, addr_scratch, jump_dsa_restore + 4 + +at 0x00000156 : */ 0xc0000004,0x00000000,0x00000568, +/* + +jump_dsa_restore: + JUMP 0 + +at 0x00000159 : */ 0x80080000,0x00000000, +/* + + +munge_disconnect: + + + + + + + + + + + + + + + + + + + + + JUMP dsa_schedule + +at 0x0000015b : */ 0x80080000,0x00000178, +/* + + + + + +munge_extended: + CLEAR ACK + +at 0x0000015d : */ 0x60000040,0x00000000, +/* + INT int_err_unexpected_phase, WHEN NOT MSG_IN + +at 0x0000015f : */ 0x9f030000,0x00000000, +/* + MOVE 1, msg_buf + 1, WHEN MSG_IN + +at 0x00000161 : */ 0x0f000001,0x00000001, +/* + JUMP munge_extended_2, IF 0x02 + +at 0x00000163 : */ 0x800c0002,0x000005a4, +/* + JUMP munge_extended_3, IF 0x03 + +at 0x00000165 : */ 0x800c0003,0x000005d4, +/* + JUMP reject_message + +at 0x00000167 : */ 0x80080000,0x00000604, +/* + +munge_extended_2: + CLEAR ACK + +at 0x00000169 : */ 0x60000040,0x00000000, +/* + MOVE 1, msg_buf + 2, WHEN MSG_IN + +at 0x0000016b : */ 0x0f000001,0x00000002, +/* + JUMP reject_message, IF NOT 0x02 ; Must be WDTR + +at 0x0000016d : */ 0x80040002,0x00000604, +/* + CLEAR ACK + +at 0x0000016f : */ 0x60000040,0x00000000, +/* + MOVE 1, msg_buf + 3, WHEN MSG_IN + +at 0x00000171 : */ 0x0f000001,0x00000003, +/* + INT int_msg_wdtr + +at 0x00000173 : */ 0x98080000,0x01000000, +/* + +munge_extended_3: + CLEAR ACK + +at 0x00000175 : */ 0x60000040,0x00000000, +/* + MOVE 1, msg_buf + 2, WHEN MSG_IN + +at 0x00000177 : */ 0x0f000001,0x00000002, +/* + JUMP reject_message, IF NOT 0x01 ; Must be SDTR + +at 0x00000179 : */ 0x80040001,0x00000604, +/* + CLEAR ACK + +at 0x0000017b : */ 0x60000040,0x00000000, +/* + MOVE 2, msg_buf + 3, WHEN MSG_IN + +at 0x0000017d : */ 0x0f000002,0x00000003, +/* + INT int_msg_sdtr + +at 0x0000017f : */ 0x98080000,0x01010000, +/* + +ENTRY reject_message +reject_message: + SET ATN + +at 0x00000181 : */ 0x58000008,0x00000000, +/* + CLEAR ACK + +at 0x00000183 : */ 0x60000040,0x00000000, +/* + MOVE 1, NCR53c7xx_msg_reject, WHEN MSG_OUT + +at 0x00000185 : */ 0x0e000001,0x00000000, +/* + RETURN + +at 0x00000187 : */ 0x90080000,0x00000000, +/* + +ENTRY accept_message +accept_message: + CLEAR ATN + +at 0x00000189 : */ 0x60000008,0x00000000, +/* + CLEAR ACK + +at 0x0000018b : */ 0x60000040,0x00000000, +/* + RETURN + +at 0x0000018d : */ 0x90080000,0x00000000, +/* + +ENTRY respond_message +respond_message: + SET ATN + +at 0x0000018f : */ 0x58000008,0x00000000, +/* + CLEAR ACK + +at 0x00000191 : */ 0x60000040,0x00000000, +/* + MOVE FROM dsa_msgout_other, WHEN MSG_OUT + +at 0x00000193 : */ 0x1e000000,0x00000068, +/* + RETURN + +at 0x00000195 : */ 0x90080000,0x00000000, +/* + +; +; command_complete +; +; PURPOSE : handle command termination when STATUS IN is detected by reading +; a status byte followed by a command termination message. +; +; Normal termination results in an INTFLY instruction, and +; the host system can pick out which command terminated by +; examining the MESSAGE and STATUS buffers of all currently +; executing commands; +; +; Abnormal (CHECK_CONDITION) termination results in an +; int_err_check_condition interrupt so that a REQUEST SENSE +; command can be issued out-of-order so that no other command +; clears the contingent allegiance condition. +; +; +; INPUTS : DSA - command +; +; CALLS : OK +; +; EXITS : On successful termination, control is passed to schedule. +; On abnormal termination, the user will usually modify the +; DSA fields and corresponding buffers and return control +; to select. +; + +ENTRY command_complete +command_complete: + MOVE FROM dsa_status, WHEN STATUS + +at 0x00000197 : */ 0x1b000000,0x00000060, +/* + + MOVE SFBR TO SCRATCH0 ; Save status + +at 0x00000199 : */ 0x6a340000,0x00000000, +/* + +ENTRY command_complete_msgin +command_complete_msgin: + MOVE FROM dsa_msgin, WHEN MSG_IN + +at 0x0000019b : */ 0x1f000000,0x00000058, +/* +; Indicate that we should be expecting a disconnect + + + + ; Above code cleared the Unexpected Disconnect bit, what do we do? + + CLEAR ACK + +at 0x0000019d : */ 0x60000040,0x00000000, +/* + + WAIT DISCONNECT + +at 0x0000019f : */ 0x48000000,0x00000000, +/* + +; +; The SCSI specification states that when a UNIT ATTENTION condition +; is pending, as indicated by a CHECK CONDITION status message, +; the target shall revert to asynchronous transfers. Since +; synchronous transfers parameters are maintained on a per INITIATOR/TARGET +; basis, and returning control to our scheduler could work on a command +; running on another lun on that target using the old parameters, we must +; interrupt the host processor to get them changed, or change them ourselves. +; +; Once SCSI-II tagged queueing is implemented, things will be even more +; hairy, since contingent allegiance conditions exist on a per-target/lun +; basis, and issuing a new command with a different tag would clear it. +; In these cases, we must interrupt the host processor to get a request +; added to the HEAD of the queue with the request sense command, or we +; must automatically issue the request sense command. + + + + + + + + INT int_norm_emulateintfly + +at 0x000001a1 : */ 0x98080000,0x02060000, +/* + + + + + + + ; Time to correct DSA following memory move + MOVE MEMORY 4, saved_dsa, addr_dsa + +at 0x000001a3 : */ 0xc0000004,0x00000000,0x00000000, +/* + + + + + + JUMP schedule + +at 0x000001a6 : */ 0x80080000,0x00000000, +/* +command_failed: + INT int_err_check_condition + +at 0x000001a8 : */ 0x98080000,0x00030000, +/* + + + + +; +; wait_reselect +; +; PURPOSE : This is essentially the idle routine, where control lands +; when there are no new processes to schedule. wait_reselect +; waits for reselection, selection, and new commands. +; +; When a successful reselection occurs, with the aid +; of fixed up code in each DSA, wait_reselect walks the +; reconnect_dsa_queue, asking each dsa if the target ID +; and LUN match its. +; +; If a match is found, a call is made back to reselected_ok, +; which through the miracles of self modifying code, extracts +; the found DSA from the reconnect_dsa_queue and then +; returns control to the DSAs thread of execution. +; +; INPUTS : NONE +; +; CALLS : OK +; +; MODIFIES : DSA, +; +; EXITS : On successful reselection, control is returned to the +; DSA which called reselected_ok. If the WAIT RESELECT +; was interrupted by a new commands arrival signaled by +; SIG_P, control is passed to schedule. If the NCR is +; selected, the host system is interrupted with an +; int_err_selected which is usually responded to by +; setting DSP to the target_abort address. + +ENTRY wait_reselect +wait_reselect: + + + + + + + WAIT RESELECT wait_reselect_failed + +at 0x000001aa : */ 0x50000000,0x00000800, +/* + +reselected: + + + + CLEAR TARGET + +at 0x000001ac : */ 0x60000200,0x00000000, +/* + + ; Read all data needed to reestablish the nexus - + MOVE 1, reselected_identify, WHEN MSG_IN + +at 0x000001ae : */ 0x0f000001,0x00000000, +/* + ; We used to CLEAR ACK here. + + + + + + ; Point DSA at the current head of the disconnected queue. + + MOVE MEMORY 4, reconnect_dsa_head, addr_scratch + +at 0x000001b0 : */ 0xc0000004,0x00000000,0x00000000, +/* + + + MOVE MEMORY 4, addr_scratch, saved_dsa + +at 0x000001b3 : */ 0xc0000004,0x00000000,0x00000000, +/* + + + + + ; Fix the update-next pointer so that the reconnect_dsa_head + ; pointer is the one that will be updated if this DSA is a hit + ; and we remove it from the queue. + + MOVE MEMORY 4, addr_reconnect_dsa_head, reselected_ok_patch + 8 + +at 0x000001b6 : */ 0xc0000004,0x00000000,0x000007ec, +/* + + ; Time to correct DSA following memory move + MOVE MEMORY 4, saved_dsa, addr_dsa + +at 0x000001b9 : */ 0xc0000004,0x00000000,0x00000000, +/* + + +ENTRY reselected_check_next +reselected_check_next: + + + + ; Check for a NULL pointer. + MOVE DSA0 TO SFBR + +at 0x000001bc : */ 0x72100000,0x00000000, +/* + JUMP reselected_not_end, IF NOT 0 + +at 0x000001be : */ 0x80040000,0x00000738, +/* + MOVE DSA1 TO SFBR + +at 0x000001c0 : */ 0x72110000,0x00000000, +/* + JUMP reselected_not_end, IF NOT 0 + +at 0x000001c2 : */ 0x80040000,0x00000738, +/* + MOVE DSA2 TO SFBR + +at 0x000001c4 : */ 0x72120000,0x00000000, +/* + JUMP reselected_not_end, IF NOT 0 + +at 0x000001c6 : */ 0x80040000,0x00000738, +/* + MOVE DSA3 TO SFBR + +at 0x000001c8 : */ 0x72130000,0x00000000, +/* + JUMP reselected_not_end, IF NOT 0 + +at 0x000001ca : */ 0x80040000,0x00000738, +/* + INT int_err_unexpected_reselect + +at 0x000001cc : */ 0x98080000,0x00020000, +/* + +reselected_not_end: + ; + ; XXX the ALU is only eight bits wide, and the assembler + ; wont do the dirt work for us. As long as dsa_check_reselect + ; is negative, we need to sign extend with 1 bits to the full + ; 32 bit width of the address. + ; + ; A potential work around would be to have a known alignment + ; of the DSA structure such that the base address plus + ; dsa_check_reselect doesn't require carrying from bytes + ; higher than the LSB. + ; + + MOVE DSA0 TO SFBR + +at 0x000001ce : */ 0x72100000,0x00000000, +/* + MOVE SFBR + dsa_check_reselect TO SCRATCH0 + +at 0x000001d0 : */ 0x6e340000,0x00000000, +/* + MOVE DSA1 TO SFBR + +at 0x000001d2 : */ 0x72110000,0x00000000, +/* + MOVE SFBR + 0xff TO SCRATCH1 WITH CARRY + +at 0x000001d4 : */ 0x6f35ff00,0x00000000, +/* + MOVE DSA2 TO SFBR + +at 0x000001d6 : */ 0x72120000,0x00000000, +/* + MOVE SFBR + 0xff TO SCRATCH2 WITH CARRY + +at 0x000001d8 : */ 0x6f36ff00,0x00000000, +/* + MOVE DSA3 TO SFBR + +at 0x000001da : */ 0x72130000,0x00000000, +/* + MOVE SFBR + 0xff TO SCRATCH3 WITH CARRY + +at 0x000001dc : */ 0x6f37ff00,0x00000000, +/* + + + MOVE MEMORY 4, addr_scratch, reselected_check + 4 + +at 0x000001de : */ 0xc0000004,0x00000000,0x00000794, +/* + + + ; Time to correct DSA following memory move + MOVE MEMORY 4, saved_dsa, addr_dsa + +at 0x000001e1 : */ 0xc0000004,0x00000000,0x00000000, +/* + +reselected_check: + JUMP 0 + +at 0x000001e4 : */ 0x80080000,0x00000000, +/* + + +; +; + +; We have problems here - the memory move corrupts TEMP and DSA. This +; routine is called from DSA code, and patched from many places. Scratch +; is probably free when it is called. +; We have to: +; copy temp to scratch, one byte at a time +; write scratch to patch a jump in place of the return +; do the move memory +; jump to the patched in return address +; DSA is corrupt when we get here, and can be left corrupt + +ENTRY reselected_ok +reselected_ok: + MOVE TEMP0 TO SFBR + +at 0x000001e6 : */ 0x721c0000,0x00000000, +/* + MOVE SFBR TO SCRATCH0 + +at 0x000001e8 : */ 0x6a340000,0x00000000, +/* + MOVE TEMP1 TO SFBR + +at 0x000001ea : */ 0x721d0000,0x00000000, +/* + MOVE SFBR TO SCRATCH1 + +at 0x000001ec : */ 0x6a350000,0x00000000, +/* + MOVE TEMP2 TO SFBR + +at 0x000001ee : */ 0x721e0000,0x00000000, +/* + MOVE SFBR TO SCRATCH2 + +at 0x000001f0 : */ 0x6a360000,0x00000000, +/* + MOVE TEMP3 TO SFBR + +at 0x000001f2 : */ 0x721f0000,0x00000000, +/* + MOVE SFBR TO SCRATCH3 + +at 0x000001f4 : */ 0x6a370000,0x00000000, +/* + MOVE MEMORY 4, addr_scratch, reselected_ok_jump + 4 + +at 0x000001f6 : */ 0xc0000004,0x00000000,0x000007f4, +/* +reselected_ok_patch: + MOVE MEMORY 4, 0, 0 + +at 0x000001f9 : */ 0xc0000004,0x00000000,0x00000000, +/* +reselected_ok_jump: + JUMP 0 + +at 0x000001fc : */ 0x80080000,0x00000000, +/* + + + + + +selected: + INT int_err_selected; + +at 0x000001fe : */ 0x98080000,0x00010000, +/* + +; +; A select or reselect failure can be caused by one of two conditions : +; 1. SIG_P was set. This will be the case if the user has written +; a new value to a previously NULL head of the issue queue. +; +; 2. The NCR53c810 was selected or reselected by another device. +; +; 3. The bus was already busy since we were selected or reselected +; before starting the command. + +wait_reselect_failed: + + + +; Check selected bit. + + ; Must work out how to tell if we are selected.... + + + + +; Reading CTEST2 clears the SIG_P bit in the ISTAT register. + MOVE CTEST2 & 0x40 TO SFBR + +at 0x00000200 : */ 0x74164000,0x00000000, +/* + JUMP schedule, IF 0x40 + +at 0x00000202 : */ 0x800c0040,0x00000000, +/* +; Check connected bit. +; FIXME: this needs to change if we support target mode + MOVE ISTAT & 0x08 TO SFBR + +at 0x00000204 : */ 0x74210800,0x00000000, +/* + JUMP reselected, IF 0x08 + +at 0x00000206 : */ 0x800c0008,0x000006b0, +/* +; FIXME : Something bogus happened, and we shouldn't fail silently. + + + + INT int_debug_panic + +at 0x00000208 : */ 0x98080000,0x030b0000, +/* + + + +select_failed: + + ; Disable selection timer + MOVE CTEST7 | 0x10 TO CTEST7 + +at 0x0000020a : */ 0x7a1b1000,0x00000000, +/* + + + + +; Otherwise, mask the selected and reselected bits off SIST0 + + ; Let's assume we don't get selected for now + MOVE SSTAT0 & 0x10 TO SFBR + +at 0x0000020c : */ 0x740d1000,0x00000000, +/* + + + + + JUMP reselected, IF 0x10 + +at 0x0000020e : */ 0x800c0010,0x000006b0, +/* +; If SIGP is set, the user just gave us another command, and +; we should restart or return to the scheduler. +; Reading CTEST2 clears the SIG_P bit in the ISTAT register. + MOVE CTEST2 & 0x40 TO SFBR + +at 0x00000210 : */ 0x74164000,0x00000000, +/* + JUMP select, IF 0x40 + +at 0x00000212 : */ 0x800c0040,0x000001f8, +/* +; Check connected bit. +; FIXME: this needs to change if we support target mode +; FIXME: is this really necessary? + MOVE ISTAT & 0x08 TO SFBR + +at 0x00000214 : */ 0x74210800,0x00000000, +/* + JUMP reselected, IF 0x08 + +at 0x00000216 : */ 0x800c0008,0x000006b0, +/* +; FIXME : Something bogus happened, and we shouldn't fail silently. + + + + INT int_debug_panic + +at 0x00000218 : */ 0x98080000,0x030b0000, +/* + + +; +; test_1 +; test_2 +; +; PURPOSE : run some verification tests on the NCR. test_1 +; copies test_src to test_dest and interrupts the host +; processor, testing for cache coherency and interrupt +; problems in the processes. +; +; test_2 runs a command with offsets relative to the +; DSA on entry, and is useful for miscellaneous experimentation. +; + +; Verify that interrupts are working correctly and that we don't +; have a cache invalidation problem. + +ABSOLUTE test_src = 0, test_dest = 0 +ENTRY test_1 +test_1: + MOVE MEMORY 4, test_src, test_dest + +at 0x0000021a : */ 0xc0000004,0x00000000,0x00000000, +/* + INT int_test_1 + +at 0x0000021d : */ 0x98080000,0x04000000, +/* + +; +; Run arbitrary commands, with test code establishing a DSA +; + +ENTRY test_2 +test_2: + CLEAR TARGET + +at 0x0000021f : */ 0x60000200,0x00000000, +/* + + ; Enable selection timer + + + + MOVE CTEST7 & 0xef TO CTEST7 + +at 0x00000221 : */ 0x7c1bef00,0x00000000, +/* + + + SELECT ATN FROM 0, test_2_fail + +at 0x00000223 : */ 0x43000000,0x000008dc, +/* + JUMP test_2_msgout, WHEN MSG_OUT + +at 0x00000225 : */ 0x860b0000,0x0000089c, +/* +ENTRY test_2_msgout +test_2_msgout: + + ; Disable selection timer + MOVE CTEST7 | 0x10 TO CTEST7 + +at 0x00000227 : */ 0x7a1b1000,0x00000000, +/* + + MOVE FROM 8, WHEN MSG_OUT + +at 0x00000229 : */ 0x1e000000,0x00000008, +/* + MOVE FROM 16, WHEN CMD + +at 0x0000022b : */ 0x1a000000,0x00000010, +/* + MOVE FROM 24, WHEN DATA_IN + +at 0x0000022d : */ 0x19000000,0x00000018, +/* + MOVE FROM 32, WHEN STATUS + +at 0x0000022f : */ 0x1b000000,0x00000020, +/* + MOVE FROM 40, WHEN MSG_IN + +at 0x00000231 : */ 0x1f000000,0x00000028, +/* + + + + CLEAR ACK + +at 0x00000233 : */ 0x60000040,0x00000000, +/* + WAIT DISCONNECT + +at 0x00000235 : */ 0x48000000,0x00000000, +/* +test_2_fail: + + ; Disable selection timer + MOVE CTEST7 | 0x10 TO CTEST7 + +at 0x00000237 : */ 0x7a1b1000,0x00000000, +/* + + INT int_test_2 + +at 0x00000239 : */ 0x98080000,0x04010000, +/* + +ENTRY debug_break +debug_break: + INT int_debug_break + +at 0x0000023b : */ 0x98080000,0x03000000, +/* + +; +; initiator_abort +; target_abort +; +; PURPOSE : Abort the currently established nexus from with initiator +; or target mode. +; +; + +ENTRY target_abort +target_abort: + SET TARGET + +at 0x0000023d : */ 0x58000200,0x00000000, +/* + DISCONNECT + +at 0x0000023f : */ 0x48000000,0x00000000, +/* + CLEAR TARGET + +at 0x00000241 : */ 0x60000200,0x00000000, +/* + JUMP schedule + +at 0x00000243 : */ 0x80080000,0x00000000, +/* + +ENTRY initiator_abort +initiator_abort: + SET ATN + +at 0x00000245 : */ 0x58000008,0x00000000, +/* +; +; The SCSI-I specification says that targets may go into MSG out at +; their leisure upon receipt of the ATN single. On all versions of the +; specification, we can't change phases until REQ transitions true->false, +; so we need to sink/source one byte of data to allow the transition. +; +; For the sake of safety, we'll only source one byte of data in all +; cases, but to accommodate the SCSI-I dain bramage, we'll sink an +; arbitrary number of bytes. + JUMP spew_cmd, WHEN CMD + +at 0x00000247 : */ 0x820b0000,0x0000094c, +/* + JUMP eat_msgin, WHEN MSG_IN + +at 0x00000249 : */ 0x870b0000,0x0000095c, +/* + JUMP eat_datain, WHEN DATA_IN + +at 0x0000024b : */ 0x810b0000,0x0000098c, +/* + JUMP eat_status, WHEN STATUS + +at 0x0000024d : */ 0x830b0000,0x00000974, +/* + JUMP spew_dataout, WHEN DATA_OUT + +at 0x0000024f : */ 0x800b0000,0x000009a4, +/* + JUMP sated + +at 0x00000251 : */ 0x80080000,0x000009ac, +/* +spew_cmd: + MOVE 1, NCR53c7xx_zero, WHEN CMD + +at 0x00000253 : */ 0x0a000001,0x00000000, +/* + JUMP sated + +at 0x00000255 : */ 0x80080000,0x000009ac, +/* +eat_msgin: + MOVE 1, NCR53c7xx_sink, WHEN MSG_IN + +at 0x00000257 : */ 0x0f000001,0x00000000, +/* + JUMP eat_msgin, WHEN MSG_IN + +at 0x00000259 : */ 0x870b0000,0x0000095c, +/* + JUMP sated + +at 0x0000025b : */ 0x80080000,0x000009ac, +/* +eat_status: + MOVE 1, NCR53c7xx_sink, WHEN STATUS + +at 0x0000025d : */ 0x0b000001,0x00000000, +/* + JUMP eat_status, WHEN STATUS + +at 0x0000025f : */ 0x830b0000,0x00000974, +/* + JUMP sated + +at 0x00000261 : */ 0x80080000,0x000009ac, +/* +eat_datain: + MOVE 1, NCR53c7xx_sink, WHEN DATA_IN + +at 0x00000263 : */ 0x09000001,0x00000000, +/* + JUMP eat_datain, WHEN DATA_IN + +at 0x00000265 : */ 0x810b0000,0x0000098c, +/* + JUMP sated + +at 0x00000267 : */ 0x80080000,0x000009ac, +/* +spew_dataout: + MOVE 1, NCR53c7xx_zero, WHEN DATA_OUT + +at 0x00000269 : */ 0x08000001,0x00000000, +/* +sated: + + + + MOVE 1, NCR53c7xx_msg_abort, WHEN MSG_OUT + +at 0x0000026b : */ 0x0e000001,0x00000000, +/* + WAIT DISCONNECT + +at 0x0000026d : */ 0x48000000,0x00000000, +/* + INT int_norm_aborted + +at 0x0000026f : */ 0x98080000,0x02040000, +/* + + + + +; Little patched jump, used to overcome problems with TEMP getting +; corrupted on memory moves. + +jump_temp: + JUMP 0 + +at 0x00000271 : */ 0x80080000,0x00000000, +}; + +#define A_NCR53c7xx_msg_abort 0x00000000 +static u32 A_NCR53c7xx_msg_abort_used[] __attribute((unused)) = { + 0x0000026c, +}; + +#define A_NCR53c7xx_msg_reject 0x00000000 +static u32 A_NCR53c7xx_msg_reject_used[] __attribute((unused)) = { + 0x00000186, +}; + +#define A_NCR53c7xx_sink 0x00000000 +static u32 A_NCR53c7xx_sink_used[] __attribute((unused)) = { + 0x00000258, + 0x0000025e, + 0x00000264, +}; + +#define A_NCR53c7xx_zero 0x00000000 +static u32 A_NCR53c7xx_zero_used[] __attribute((unused)) = { + 0x00000254, + 0x0000026a, +}; + +#define A_NOP_insn 0x00000000 +static u32 A_NOP_insn_used[] __attribute((unused)) = { + 0x00000017, +}; + +#define A_addr_dsa 0x00000000 +static u32 A_addr_dsa_used[] __attribute((unused)) = { + 0x0000000f, + 0x00000026, + 0x00000033, + 0x00000040, + 0x00000055, + 0x00000079, + 0x0000008e, + 0x000000bc, + 0x000000d2, + 0x00000130, + 0x000001a5, + 0x000001bb, + 0x000001e3, +}; + +#define A_addr_reconnect_dsa_head 0x00000000 +static u32 A_addr_reconnect_dsa_head_used[] __attribute((unused)) = { + 0x000001b7, +}; + +#define A_addr_scratch 0x00000000 +static u32 A_addr_scratch_used[] __attribute((unused)) = { + 0x00000002, + 0x00000004, + 0x00000008, + 0x00000020, + 0x00000022, + 0x00000049, + 0x00000060, + 0x0000006a, + 0x00000071, + 0x00000073, + 0x000000ab, + 0x000000b5, + 0x000000c1, + 0x000000cb, + 0x0000012c, + 0x00000142, + 0x00000157, + 0x000001b2, + 0x000001b4, + 0x000001df, + 0x000001f7, +}; + +#define A_addr_temp 0x00000000 +static u32 A_addr_temp_used[] __attribute((unused)) = { +}; + +#define A_dmode_memory_to_memory 0x00000000 +static u32 A_dmode_memory_to_memory_used[] __attribute((unused)) = { +}; + +#define A_dmode_memory_to_ncr 0x00000000 +static u32 A_dmode_memory_to_ncr_used[] __attribute((unused)) = { +}; + +#define A_dmode_ncr_to_memory 0x00000000 +static u32 A_dmode_ncr_to_memory_used[] __attribute((unused)) = { +}; + +#define A_dsa_check_reselect 0x00000000 +static u32 A_dsa_check_reselect_used[] __attribute((unused)) = { + 0x000001d0, +}; + +#define A_dsa_cmdout 0x00000048 +static u32 A_dsa_cmdout_used[] __attribute((unused)) = { + 0x0000009a, +}; + +#define A_dsa_cmnd 0x00000038 +static u32 A_dsa_cmnd_used[] __attribute((unused)) = { +}; + +#define A_dsa_datain 0x00000054 +static u32 A_dsa_datain_used[] __attribute((unused)) = { + 0x000000c2, +}; + +#define A_dsa_dataout 0x00000050 +static u32 A_dsa_dataout_used[] __attribute((unused)) = { + 0x000000ac, +}; + +#define A_dsa_end 0x00000070 +static u32 A_dsa_end_used[] __attribute((unused)) = { +}; + +#define A_dsa_fields_start 0x00000000 +static u32 A_dsa_fields_start_used[] __attribute((unused)) = { +}; + +#define A_dsa_msgin 0x00000058 +static u32 A_dsa_msgin_used[] __attribute((unused)) = { + 0x0000019c, +}; + +#define A_dsa_msgout 0x00000040 +static u32 A_dsa_msgout_used[] __attribute((unused)) = { + 0x00000089, +}; + +#define A_dsa_msgout_other 0x00000068 +static u32 A_dsa_msgout_other_used[] __attribute((unused)) = { + 0x00000194, +}; + +#define A_dsa_next 0x00000030 +static u32 A_dsa_next_used[] __attribute((unused)) = { + 0x00000061, +}; + +#define A_dsa_restore_pointers 0x00000000 +static u32 A_dsa_restore_pointers_used[] __attribute((unused)) = { + 0x00000146, +}; + +#define A_dsa_save_data_pointer 0x00000000 +static u32 A_dsa_save_data_pointer_used[] __attribute((unused)) = { + 0x00000131, +}; + +#define A_dsa_select 0x0000003c +static u32 A_dsa_select_used[] __attribute((unused)) = { + 0x00000082, +}; + +#define A_dsa_sscf_710 0x00000000 +static u32 A_dsa_sscf_710_used[] __attribute((unused)) = { + 0x00000007, +}; + +#define A_dsa_status 0x00000060 +static u32 A_dsa_status_used[] __attribute((unused)) = { + 0x00000198, +}; + +#define A_dsa_temp_addr_array_value 0x00000000 +static u32 A_dsa_temp_addr_array_value_used[] __attribute((unused)) = { +}; + +#define A_dsa_temp_addr_dsa_value 0x00000000 +static u32 A_dsa_temp_addr_dsa_value_used[] __attribute((unused)) = { + 0x00000001, +}; + +#define A_dsa_temp_addr_new_value 0x00000000 +static u32 A_dsa_temp_addr_new_value_used[] __attribute((unused)) = { +}; + +#define A_dsa_temp_addr_next 0x00000000 +static u32 A_dsa_temp_addr_next_used[] __attribute((unused)) = { + 0x0000001c, + 0x0000004f, +}; + +#define A_dsa_temp_addr_residual 0x00000000 +static u32 A_dsa_temp_addr_residual_used[] __attribute((unused)) = { + 0x0000002d, + 0x0000003b, +}; + +#define A_dsa_temp_addr_saved_pointer 0x00000000 +static u32 A_dsa_temp_addr_saved_pointer_used[] __attribute((unused)) = { + 0x0000002b, + 0x00000037, +}; + +#define A_dsa_temp_addr_saved_residual 0x00000000 +static u32 A_dsa_temp_addr_saved_residual_used[] __attribute((unused)) = { + 0x0000002e, + 0x0000003a, +}; + +#define A_dsa_temp_lun 0x00000000 +static u32 A_dsa_temp_lun_used[] __attribute((unused)) = { + 0x0000004c, +}; + +#define A_dsa_temp_next 0x00000000 +static u32 A_dsa_temp_next_used[] __attribute((unused)) = { + 0x0000001f, +}; + +#define A_dsa_temp_sync 0x00000000 +static u32 A_dsa_temp_sync_used[] __attribute((unused)) = { + 0x00000057, +}; + +#define A_dsa_temp_target 0x00000000 +static u32 A_dsa_temp_target_used[] __attribute((unused)) = { + 0x00000045, +}; + +#define A_emulfly 0x00000000 +static u32 A_emulfly_used[] __attribute((unused)) = { +}; + +#define A_int_debug_break 0x03000000 +static u32 A_int_debug_break_used[] __attribute((unused)) = { + 0x0000023c, +}; + +#define A_int_debug_panic 0x030b0000 +static u32 A_int_debug_panic_used[] __attribute((unused)) = { + 0x00000209, + 0x00000219, +}; + +#define A_int_err_check_condition 0x00030000 +static u32 A_int_err_check_condition_used[] __attribute((unused)) = { + 0x000001a9, +}; + +#define A_int_err_no_phase 0x00040000 +static u32 A_int_err_no_phase_used[] __attribute((unused)) = { +}; + +#define A_int_err_selected 0x00010000 +static u32 A_int_err_selected_used[] __attribute((unused)) = { + 0x000001ff, +}; + +#define A_int_err_unexpected_phase 0x00000000 +static u32 A_int_err_unexpected_phase_used[] __attribute((unused)) = { + 0x00000092, + 0x00000098, + 0x000000a0, + 0x000000d6, + 0x000000da, + 0x000000dc, + 0x000000e4, + 0x000000e8, + 0x000000ea, + 0x000000f2, + 0x000000f6, + 0x000000f8, + 0x000000fa, + 0x00000160, +}; + +#define A_int_err_unexpected_reselect 0x00020000 +static u32 A_int_err_unexpected_reselect_used[] __attribute((unused)) = { + 0x000001cd, +}; + +#define A_int_msg_1 0x01020000 +static u32 A_int_msg_1_used[] __attribute((unused)) = { + 0x00000114, + 0x00000116, +}; + +#define A_int_msg_sdtr 0x01010000 +static u32 A_int_msg_sdtr_used[] __attribute((unused)) = { + 0x00000180, +}; + +#define A_int_msg_wdtr 0x01000000 +static u32 A_int_msg_wdtr_used[] __attribute((unused)) = { + 0x00000174, +}; + +#define A_int_norm_aborted 0x02040000 +static u32 A_int_norm_aborted_used[] __attribute((unused)) = { + 0x00000270, +}; + +#define A_int_norm_command_complete 0x02020000 +static u32 A_int_norm_command_complete_used[] __attribute((unused)) = { +}; + +#define A_int_norm_disconnected 0x02030000 +static u32 A_int_norm_disconnected_used[] __attribute((unused)) = { +}; + +#define A_int_norm_emulateintfly 0x02060000 +static u32 A_int_norm_emulateintfly_used[] __attribute((unused)) = { + 0x000001a2, +}; + +#define A_int_norm_reselect_complete 0x02010000 +static u32 A_int_norm_reselect_complete_used[] __attribute((unused)) = { +}; + +#define A_int_norm_reset 0x02050000 +static u32 A_int_norm_reset_used[] __attribute((unused)) = { +}; + +#define A_int_norm_select_complete 0x02000000 +static u32 A_int_norm_select_complete_used[] __attribute((unused)) = { +}; + +#define A_int_test_1 0x04000000 +static u32 A_int_test_1_used[] __attribute((unused)) = { + 0x0000021e, +}; + +#define A_int_test_2 0x04010000 +static u32 A_int_test_2_used[] __attribute((unused)) = { + 0x0000023a, +}; + +#define A_int_test_3 0x04020000 +static u32 A_int_test_3_used[] __attribute((unused)) = { +}; + +#define A_msg_buf 0x00000000 +static u32 A_msg_buf_used[] __attribute((unused)) = { + 0x00000108, + 0x00000162, + 0x0000016c, + 0x00000172, + 0x00000178, + 0x0000017e, +}; + +#define A_reconnect_dsa_head 0x00000000 +static u32 A_reconnect_dsa_head_used[] __attribute((unused)) = { + 0x0000006d, + 0x00000074, + 0x000001b1, +}; + +#define A_reselected_identify 0x00000000 +static u32 A_reselected_identify_used[] __attribute((unused)) = { + 0x00000048, + 0x000001af, +}; + +#define A_reselected_tag 0x00000000 +static u32 A_reselected_tag_used[] __attribute((unused)) = { +}; + +#define A_saved_dsa 0x00000000 +static u32 A_saved_dsa_used[] __attribute((unused)) = { + 0x00000005, + 0x0000000e, + 0x00000023, + 0x00000025, + 0x00000032, + 0x0000003f, + 0x00000054, + 0x0000005f, + 0x00000070, + 0x00000078, + 0x0000008d, + 0x000000aa, + 0x000000bb, + 0x000000c0, + 0x000000d1, + 0x0000012f, + 0x000001a4, + 0x000001b5, + 0x000001ba, + 0x000001e2, +}; + +#define A_schedule 0x00000000 +static u32 A_schedule_used[] __attribute((unused)) = { + 0x0000007d, + 0x000001a7, + 0x00000203, + 0x00000244, +}; + +#define A_test_dest 0x00000000 +static u32 A_test_dest_used[] __attribute((unused)) = { + 0x0000021c, +}; + +#define A_test_src 0x00000000 +static u32 A_test_src_used[] __attribute((unused)) = { + 0x0000021b, +}; + +#define Ent_accept_message 0x00000624 +#define Ent_cmdout_cmdout 0x00000264 +#define Ent_command_complete 0x0000065c +#define Ent_command_complete_msgin 0x0000066c +#define Ent_data_transfer 0x0000026c +#define Ent_datain_to_jump 0x00000334 +#define Ent_debug_break 0x000008ec +#define Ent_dsa_code_begin 0x00000000 +#define Ent_dsa_code_check_reselect 0x0000010c +#define Ent_dsa_code_fix_jump 0x00000058 +#define Ent_dsa_code_restore_pointers 0x000000d8 +#define Ent_dsa_code_save_data_pointer 0x000000a4 +#define Ent_dsa_code_template 0x00000000 +#define Ent_dsa_code_template_end 0x00000178 +#define Ent_dsa_schedule 0x00000178 +#define Ent_dsa_zero 0x00000178 +#define Ent_end_data_transfer 0x000002a4 +#define Ent_initiator_abort 0x00000914 +#define Ent_msg_in 0x0000041c +#define Ent_msg_in_restart 0x000003fc +#define Ent_other_in 0x0000038c +#define Ent_other_out 0x00000354 +#define Ent_other_transfer 0x000003c4 +#define Ent_reject_message 0x00000604 +#define Ent_reselected_check_next 0x000006f0 +#define Ent_reselected_ok 0x00000798 +#define Ent_respond_message 0x0000063c +#define Ent_select 0x000001f8 +#define Ent_select_msgout 0x00000218 +#define Ent_target_abort 0x000008f4 +#define Ent_test_1 0x00000868 +#define Ent_test_2 0x0000087c +#define Ent_test_2_msgout 0x0000089c +#define Ent_wait_reselect 0x000006a8 +static u32 LABELPATCHES[] __attribute((unused)) = { + 0x00000011, + 0x0000001a, + 0x0000001d, + 0x00000028, + 0x0000002a, + 0x00000035, + 0x00000038, + 0x00000042, + 0x00000050, + 0x00000052, + 0x0000006b, + 0x00000083, + 0x00000085, + 0x00000090, + 0x00000094, + 0x00000096, + 0x0000009c, + 0x0000009e, + 0x000000a2, + 0x000000a4, + 0x000000a6, + 0x000000a8, + 0x000000b6, + 0x000000b9, + 0x000000cc, + 0x000000cf, + 0x000000d8, + 0x000000de, + 0x000000e0, + 0x000000e6, + 0x000000ec, + 0x000000ee, + 0x000000f4, + 0x000000fc, + 0x000000fe, + 0x0000010a, + 0x0000010c, + 0x0000010e, + 0x00000110, + 0x00000112, + 0x00000118, + 0x0000011a, + 0x0000012d, + 0x00000143, + 0x00000158, + 0x0000015c, + 0x00000164, + 0x00000166, + 0x00000168, + 0x0000016e, + 0x0000017a, + 0x000001ab, + 0x000001b8, + 0x000001bf, + 0x000001c3, + 0x000001c7, + 0x000001cb, + 0x000001e0, + 0x000001f8, + 0x00000207, + 0x0000020f, + 0x00000213, + 0x00000217, + 0x00000224, + 0x00000226, + 0x00000248, + 0x0000024a, + 0x0000024c, + 0x0000024e, + 0x00000250, + 0x00000252, + 0x00000256, + 0x0000025a, + 0x0000025c, + 0x00000260, + 0x00000262, + 0x00000266, + 0x00000268, +}; + +static struct { + u32 offset; + void *address; +} EXTERNAL_PATCHES[] __attribute((unused)) = { +}; + +static u32 INSTRUCTIONS __attribute((unused)) = 290; +static u32 PATCHES __attribute((unused)) = 78; +static u32 EXTERNAL_PATCHES_LEN __attribute((unused)) = 0; |