summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/Kconfig')
-rw-r--r--drivers/scsi/Kconfig1802
1 files changed, 1802 insertions, 0 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
new file mode 100644
index 000000000000..d22b32f4662d
--- /dev/null
+++ b/drivers/scsi/Kconfig
@@ -0,0 +1,1802 @@
+menu "SCSI device support"
+
+config SCSI
+ tristate "SCSI device support"
+ ---help---
+ If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
+ any other SCSI device under Linux, say Y and make sure that you know
+ the name of your SCSI host adapter (the card inside your computer
+ that "speaks" the SCSI protocol, also called SCSI controller),
+ because you will be asked for it.
+
+ You also need to say Y here if you have a device which speaks
+ the SCSI protocol. Examples of this include the parallel port
+ version of the IOMEGA ZIP drive, USB storage devices, Fibre
+ Channel, FireWire storage and the IDE-SCSI emulation driver.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/scsi/scsi.txt>.
+ The module will be called scsi_mod.
+
+ However, do not compile this as a module if your root file system
+ (the one containing the directory /) is located on a SCSI device.
+
+config SCSI_PROC_FS
+ bool "legacy /proc/scsi/ support"
+ depends on SCSI && PROC_FS
+ default y
+ ---help---
+ This option enables support for the various files in
+ /proc/scsi. In Linux 2.6 this has been superceeded by
+ files in sysfs but many legacy applications rely on this.
+
+ If unusure say Y.
+
+comment "SCSI support type (disk, tape, CD-ROM)"
+ depends on SCSI
+
+config BLK_DEV_SD
+ tristate "SCSI disk support"
+ depends on SCSI
+ ---help---
+ If you want to use SCSI hard disks, Fibre Channel disks,
+ USB storage or the SCSI or parallel port version of
+ the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO,
+ the Disk-HOWTO and the Multi-Disk-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. This is NOT for SCSI
+ CD-ROMs.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/scsi/scsi.txt>.
+ The module will be called sd_mod.
+
+ Do not compile this driver as a module if your root file system
+ (the one containing the directory /) is located on a SCSI disk.
+ In this case, do not compile the driver for your SCSI host adapter
+ (below) as a module either.
+
+config CHR_DEV_ST
+ tristate "SCSI tape support"
+ depends on SCSI
+ ---help---
+ If you want to use a SCSI tape drive under Linux, say Y and read the
+ SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, and
+ <file:Documentation/scsi/st.txt> in the kernel source. This is NOT
+ for SCSI CD-ROMs.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/scsi/scsi.txt>. The module will be called st.
+
+config CHR_DEV_OSST
+ tristate "SCSI OnStream SC-x0 tape support"
+ depends on SCSI
+ ---help---
+ The OnStream SC-x0 SCSI tape drives can not be driven by the
+ standard st driver, but instead need this special osst driver and
+ use the /dev/osstX char device nodes (major 206). Via usb-storage
+ and ide-scsi, you may be able to drive the USB-x0 and DI-x0 drives
+ as well. Note that there is also a second generation of OnStream
+ tape drives (ADR-x0) that supports the standard SCSI-2 commands for
+ tapes (QIC-157) and can be driven by the standard driver st.
+ For more information, you may have a look at the SCSI-HOWTO
+ <http://www.tldp.org/docs.html#howto> and
+ <file:Documentation/scsi/osst.txt> in the kernel source.
+ More info on the OnStream driver may be found on
+ <http://linux1.onstream.nl/test/>
+ Please also have a look at the standard st docu, as most of it
+ applies to osst as well.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/scsi/scsi.txt>. The module will be called osst.
+
+config BLK_DEV_SR
+ tristate "SCSI CDROM support"
+ depends on SCSI
+ ---help---
+ If you want to use a SCSI or FireWire CD-ROM under Linux,
+ say Y and read the SCSI-HOWTO and the CDROM-HOWTO at
+ <http://www.tldp.org/docs.html#howto>. Also make sure to say
+ Y or M to "ISO 9660 CD-ROM file system support" later.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/scsi/scsi.txt>.
+ The module will be called sr_mod.
+
+config BLK_DEV_SR_VENDOR
+ bool "Enable vendor-specific extensions (for SCSI CDROM)"
+ depends on BLK_DEV_SR
+ help
+ This enables the usage of vendor specific SCSI commands. This is
+ required to support multisession CDs with old NEC/TOSHIBA cdrom
+ drives (and HP Writers). If you have such a drive and get the first
+ session only, try saying Y here; everybody else says N.
+
+config CHR_DEV_SG
+ tristate "SCSI generic support"
+ depends on SCSI
+ ---help---
+ If you want to use SCSI scanners, synthesizers or CD-writers or just
+ about anything having "SCSI" in its name other than hard disks,
+ CD-ROMs or tapes, say Y here. These won't be supported by the kernel
+ directly, so you need some additional software which knows how to
+ talk to these devices using the SCSI protocol:
+
+ For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD
+ writer software look at Cdrtools
+ (<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>)
+ and for burning a "disk at once": CDRDAO
+ (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
+ quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
+ For other devices, it's possible that you'll have to write the
+ driver software yourself. Please read the file
+ <file:Documentation/scsi/scsi-generic.txt> for more information.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/scsi/scsi.txt>. The module will be called sg.
+
+ If unsure, say N.
+
+comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs"
+ depends on SCSI
+
+config SCSI_MULTI_LUN
+ bool "Probe all LUNs on each SCSI device"
+ depends on SCSI
+ help
+ If you have a SCSI device that supports more than one LUN (Logical
+ Unit Number), e.g. a CD jukebox, and only one LUN is detected, you
+ can say Y here to force the SCSI driver to probe for multiple LUNs.
+ A SCSI device with multiple LUNs acts logically like multiple SCSI
+ devices. The vast majority of SCSI devices have only one LUN, and
+ so most people can say N here. The max_luns boot/module parameter
+ allows to override this setting.
+
+config SCSI_CONSTANTS
+ bool "Verbose SCSI error reporting (kernel size +=12K)"
+ depends on SCSI
+ help
+ The error messages regarding your SCSI hardware will be easier to
+ understand if you say Y here; it will enlarge your kernel by about
+ 12 KB. If in doubt, say Y.
+
+config SCSI_LOGGING
+ bool "SCSI logging facility"
+ depends on SCSI
+ ---help---
+ This turns on a logging facility that can be used to debug a number
+ of SCSI related problems.
+
+ If you say Y here, no logging output will appear by default, but you
+ can enable logging by saying Y to "/proc file system support" and
+ "Sysctl support" below and executing the command
+
+ echo "scsi log token [level]" > /proc/scsi/scsi
+
+ at boot time after the /proc file system has been mounted.
+
+ There are a number of things that can be used for 'token' (you can
+ find them in the source: <file:drivers/scsi/scsi.c>), and this
+ allows you to select the types of information you want, and the
+ level allows you to select the level of verbosity.
+
+ If you say N here, it may be harder to track down some types of SCSI
+ problems. If you say Y here your kernel will be somewhat larger, but
+ there should be no noticeable performance impact as long as you have
+ logging turned off.
+
+menu "SCSI Transport Attributes"
+ depends on SCSI
+
+config SCSI_SPI_ATTRS
+ tristate "Parallel SCSI (SPI) Transport Attributes"
+ depends on SCSI
+ help
+ If you wish to export transport-specific information about
+ each attached SCSI device to sysfs, say Y. Otherwise, say N.
+
+config SCSI_FC_ATTRS
+ tristate "FiberChannel Transport Attributes"
+ depends on SCSI
+ help
+ If you wish to export transport-specific information about
+ each attached FiberChannel device to sysfs, say Y.
+ Otherwise, say N.
+
+config SCSI_ISCSI_ATTRS
+ tristate "iSCSI Transport Attributes"
+ depends on SCSI
+ help
+ If you wish to export transport-specific information about
+ each attached iSCSI device to sysfs, say Y.
+ Otherwise, say N.
+
+endmenu
+
+menu "SCSI low-level drivers"
+ depends on SCSI!=n
+
+config SGIWD93_SCSI
+ tristate "SGI WD93C93 SCSI Driver"
+ depends on SGI_IP22 && SCSI
+ help
+ If you have a Western Digital WD93 SCSI controller on
+ an SGI MIPS system, say Y. Otherwise, say N.
+
+config SCSI_DECNCR
+ tristate "DEC NCR53C94 Scsi Driver"
+ depends on MACH_DECSTATION && SCSI && TC
+ help
+ Say Y here to support the NCR53C94 SCSI controller chips on IOASIC
+ based TURBOchannel DECstations and TURBOchannel PMAZ-A cards.
+
+config SCSI_DECSII
+ tristate "DEC SII Scsi Driver"
+ depends on MACH_DECSTATION && SCSI && MIPS32
+
+config BLK_DEV_3W_XXXX_RAID
+ tristate "3ware 5/6/7/8xxx ATA-RAID support"
+ depends on PCI && SCSI
+ help
+ 3ware is the only hardware ATA-Raid product in Linux to date.
+ This card is 2,4, or 8 channel master mode support only.
+ SCSI support required!!!
+
+ <http://www.3ware.com/>
+
+ Please read the comments at the top of
+ <file:drivers/scsi/3w-xxxx.c>.
+
+config SCSI_3W_9XXX
+ tristate "3ware 9xxx SATA-RAID support"
+ depends on PCI && SCSI
+ help
+ This driver supports the 9000 series 3ware SATA-RAID cards.
+
+ <http://www.amcc.com>
+
+ Please read the comments at the top of
+ <file:drivers/scsi/3w-9xxx.c>.
+
+config SCSI_7000FASST
+ tristate "7000FASST SCSI support"
+ depends on ISA && SCSI
+ help
+ This driver supports the Western Digital 7000 SCSI host adapter
+ family. Some information is in the source:
+ <file:drivers/scsi/wd7000.c>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called wd7000.
+
+config SCSI_ACARD
+ tristate "ACARD SCSI support"
+ depends on PCI && SCSI
+ help
+ This driver supports the ACARD SCSI host adapter.
+ Support Chip <ATP870 ATP876 ATP880 ATP885>
+ To compile this driver as a module, choose M here: the
+ module will be called atp870u.
+
+config SCSI_AHA152X
+ tristate "Adaptec AHA152X/2825 support"
+ depends on ISA && SCSI && !64BIT
+ ---help---
+ This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
+ SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
+ must be manually specified in this case.
+
+ It is explained in section 3.3 of the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. You might also want to
+ read the file <file:Documentation/scsi/aha152x.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called aha152x.
+
+config SCSI_AHA1542
+ tristate "Adaptec AHA1542 support"
+ depends on ISA && SCSI
+ ---help---
+ This is support for a SCSI host adapter. It is explained in section
+ 3.4 of the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Note that Trantor was
+ purchased by Adaptec, and some former Trantor products are being
+ sold under the Adaptec name. If it doesn't work out of the box, you
+ may have to change some settings in <file:drivers/scsi/aha1542.h>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called aha1542.
+
+config SCSI_AHA1740
+ tristate "Adaptec AHA1740 support"
+ depends on EISA && SCSI
+ ---help---
+ This is support for a SCSI host adapter. It is explained in section
+ 3.5 of the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. If it doesn't work out
+ of the box, you may have to change some settings in
+ <file:drivers/scsi/aha1740.h>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called aha1740.
+
+config SCSI_AACRAID
+ tristate "Adaptec AACRAID support"
+ depends on SCSI && PCI
+
+source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
+
+config SCSI_AIC7XXX_OLD
+ tristate "Adaptec AIC7xxx support (old driver)"
+ depends on (ISA || EISA || PCI ) && SCSI
+ help
+ WARNING This driver is an older aic7xxx driver and is no longer
+ under active development. Adaptec, Inc. is writing a new driver to
+ take the place of this one, and it is recommended that whenever
+ possible, people should use the new Adaptec written driver instead
+ of this one. This driver will eventually be phased out entirely.
+
+ This is support for the various aic7xxx based Adaptec SCSI
+ controllers. These include the 274x EISA cards; 284x VLB cards;
+ 2902, 2910, 293x, 294x, 394x, 3985 and several other PCI and
+ motherboard based SCSI controllers from Adaptec. It does not support
+ the AAA-13x RAID controllers from Adaptec, nor will it likely ever
+ support them. It does not support the 2920 cards from Adaptec that
+ use the Future Domain SCSI controller chip. For those cards, you
+ need the "Future Domain 16xx SCSI support" driver.
+
+ In general, if the controller is based on an Adaptec SCSI controller
+ chip from the aic777x series or the aic78xx series, this driver
+ should work. The only exception is the 7810 which is specifically
+ not supported (that's the RAID controller chip on the AAA-13x
+ cards).
+
+ Note that the AHA2920 SCSI host adapter is *not* supported by this
+ driver; choose "Future Domain 16xx SCSI support" instead if you have
+ one of those.
+
+ Information on the configuration options for this controller can be
+ found by checking the help file for each of the available
+ configuration options. You should read
+ <file:Documentation/scsi/aic7xxx_old.txt> at a minimum before
+ contacting the maintainer with any questions. The SCSI-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>, can also
+ be of great help.
+
+ To compile this driver as a module, choose M here: the
+ module will be called aic7xxx_old.
+
+source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
+
+# All the I2O code and drivers do not seem to be 64bit safe.
+config SCSI_DPT_I2O
+ tristate "Adaptec I2O RAID support "
+ depends on !64BIT && SCSI && PCI
+ help
+ This driver supports all of Adaptec's I2O based RAID controllers as
+ well as the DPT SmartRaid V cards. This is an Adaptec maintained
+ driver by Deanna Bonds. See <file:Documentation/scsi/dpti.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dpt_i2o.
+
+config SCSI_ADVANSYS
+ tristate "AdvanSys SCSI support"
+ depends on (ISA || EISA || PCI) && SCSI && BROKEN
+ help
+ This is a driver for all SCSI host adapters manufactured by
+ AdvanSys. It is documented in the kernel source in
+ <file:drivers/scsi/advansys.c>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called advansys.
+
+config SCSI_IN2000
+ tristate "Always IN2000 SCSI support"
+ depends on ISA && SCSI
+ help
+ This is support for an ISA bus SCSI host adapter. You'll find more
+ information in <file:Documentation/scsi/in2000.txt>. If it doesn't work
+ out of the box, you may have to change the jumpers for IRQ or
+ address selection.
+
+ To compile this driver as a module, choose M here: the
+ module will be called in2000.
+
+source "drivers/scsi/megaraid/Kconfig.megaraid"
+
+config SCSI_SATA
+ bool "Serial ATA (SATA) support"
+ depends on SCSI
+ help
+ This driver family supports Serial ATA host controllers
+ and devices.
+
+ If unsure, say N.
+
+config SCSI_SATA_AHCI
+ tristate "AHCI SATA support"
+ depends on SCSI_SATA && PCI
+ help
+ This option enables support for AHCI Serial ATA.
+
+ If unsure, say N.
+
+config SCSI_SATA_SVW
+ tristate "ServerWorks Frodo / Apple K2 SATA support"
+ depends on SCSI_SATA && PCI
+ help
+ This option enables support for Broadcom/Serverworks/Apple K2
+ SATA support.
+
+ If unsure, say N.
+
+config SCSI_ATA_PIIX
+ tristate "Intel PIIX/ICH SATA support"
+ depends on SCSI_SATA && PCI
+ help
+ This option enables support for ICH5 Serial ATA.
+ If PATA support was enabled previously, this enables
+ support for select Intel PIIX/ICH PATA host controllers.
+
+ If unsure, say N.
+
+config SCSI_SATA_NV
+ tristate "NVIDIA SATA support"
+ depends on SCSI_SATA && PCI && EXPERIMENTAL
+ help
+ This option enables support for NVIDIA Serial ATA.
+
+ If unsure, say N.
+
+config SCSI_SATA_PROMISE
+ tristate "Promise SATA TX2/TX4 support"
+ depends on SCSI_SATA && PCI
+ help
+ This option enables support for Promise Serial ATA TX2/TX4.
+
+ If unsure, say N.
+
+config SCSI_SATA_QSTOR
+ tristate "Pacific Digital SATA QStor support"
+ depends on SCSI_SATA && PCI
+ help
+ This option enables support for Pacific Digital Serial ATA QStor.
+
+ If unsure, say N.
+
+config SCSI_SATA_SX4
+ tristate "Promise SATA SX4 support"
+ depends on SCSI_SATA && PCI && EXPERIMENTAL
+ help
+ This option enables support for Promise Serial ATA SX4.
+
+ If unsure, say N.
+
+config SCSI_SATA_SIL
+ tristate "Silicon Image SATA support"
+ depends on SCSI_SATA && PCI && EXPERIMENTAL
+ help
+ This option enables support for Silicon Image Serial ATA.
+
+ If unsure, say N.
+
+config SCSI_SATA_SIS
+ tristate "SiS 964/180 SATA support"
+ depends on SCSI_SATA && PCI && EXPERIMENTAL
+ help
+ This option enables support for SiS Serial ATA 964/180.
+
+ If unsure, say N.
+
+config SCSI_SATA_ULI
+ tristate "ULi Electronics SATA support"
+ depends on SCSI_SATA && PCI && EXPERIMENTAL
+ help
+ This option enables support for ULi Electronics SATA.
+
+ If unsure, say N.
+
+config SCSI_SATA_VIA
+ tristate "VIA SATA support"
+ depends on SCSI_SATA && PCI
+ help
+ This option enables support for VIA Serial ATA.
+
+ If unsure, say N.
+
+config SCSI_SATA_VITESSE
+ tristate "VITESSE VSC-7174 SATA support"
+ depends on SCSI_SATA && PCI
+ help
+ This option enables support for Vitesse VSC7174 Serial ATA.
+
+ If unsure, say N.
+
+config SCSI_BUSLOGIC
+ tristate "BusLogic SCSI support"
+ depends on (PCI || ISA || MCA) && SCSI && (BROKEN || !SPARC64)
+ ---help---
+ This is support for BusLogic MultiMaster and FlashPoint SCSI Host
+ Adapters. Consult the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, and the files
+ <file:Documentation/scsi/BusLogic.txt> and
+ <file:Documentation/scsi/FlashPoint.txt> for more information.
+
+ To compile this driver as a module, choose M here: the
+ module will be called BusLogic.
+
+config SCSI_OMIT_FLASHPOINT
+ bool "Omit FlashPoint support"
+ depends on SCSI_BUSLOGIC
+ help
+ This option allows you to omit the FlashPoint support from the
+ BusLogic SCSI driver. The FlashPoint SCCB Manager code is
+ substantial, so users of MultiMaster Host Adapters may wish to omit
+ it.
+
+#
+# This is marked broken because it uses over 4kB of stack in
+# just two routines:
+# 2076 CpqTsProcessIMQEntry
+# 2052 PeekIMQEntry
+#
+config SCSI_CPQFCTS
+ tristate "Compaq Fibre Channel 64-bit/66Mhz HBA support"
+ depends on PCI && SCSI && BROKEN
+ help
+ Say Y here to compile in support for the Compaq StorageWorks Fibre
+ Channel 64-bit/66Mhz Host Bus Adapter.
+
+config SCSI_DMX3191D
+ tristate "DMX3191D SCSI support"
+ depends on PCI && SCSI
+ help
+ This is support for Domex DMX3191D SCSI Host Adapters.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dmx3191d.
+
+config SCSI_DTC3280
+ tristate "DTC3180/3280 SCSI support"
+ depends on ISA && SCSI
+ help
+ This is support for DTC 3180/3280 SCSI Host Adapters. Please read
+ the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, and the file
+ <file:Documentation/scsi/dtc3x80.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dtc.
+
+config SCSI_EATA
+ tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support"
+ depends on (ISA || EISA || PCI) && SCSI && (BROKEN || !SPARC64)
+ ---help---
+ This driver supports all EATA/DMA-compliant SCSI host adapters. DPT
+ ISA and all EISA I/O addresses are probed looking for the "EATA"
+ signature. The addresses of all the PCI SCSI controllers reported
+ by the PCI subsystem are probed as well.
+
+ You want to read the start of <file:drivers/scsi/eata.c> and the
+ SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called eata.
+
+config SCSI_EATA_TAGGED_QUEUE
+ bool "enable tagged command queueing"
+ depends on SCSI_EATA
+ help
+ This is a feature of SCSI-2 which improves performance: the host
+ adapter can send several SCSI commands to a device's queue even if
+ previous commands haven't finished yet.
+ This is equivalent to the "eata=tc:y" boot option.
+
+config SCSI_EATA_LINKED_COMMANDS
+ bool "enable elevator sorting"
+ depends on SCSI_EATA
+ help
+ This option enables elevator sorting for all probed SCSI disks and
+ CD-ROMs. It definitely reduces the average seek distance when doing
+ random seeks, but this does not necessarily result in a noticeable
+ performance improvement: your mileage may vary...
+ This is equivalent to the "eata=lc:y" boot option.
+
+config SCSI_EATA_MAX_TAGS
+ int "maximum number of queued commands"
+ depends on SCSI_EATA
+ default "16"
+ help
+ This specifies how many SCSI commands can be maximally queued for
+ each probed SCSI device. You should reduce the default value of 16
+ only if you have disks with buggy or limited tagged command support.
+ Minimum is 2 and maximum is 62. This value is also the window size
+ used by the elevator sorting option above. The effective value used
+ by the driver for each probed SCSI device is reported at boot time.
+ This is equivalent to the "eata=mq:8" boot option.
+
+config SCSI_EATA_PIO
+ tristate "EATA-PIO (old DPT PM2001, PM2012A) support"
+ depends on (ISA || EISA || PCI) && SCSI && BROKEN
+ ---help---
+ This driver supports all EATA-PIO protocol compliant SCSI Host
+ Adapters like the DPT PM2001 and the PM2012A. EATA-DMA compliant
+ host adapters could also use this driver but are discouraged from
+ doing so, since this driver only supports hard disks and lacks
+ numerous features. You might want to have a look at the SCSI-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called eata_pio.
+
+config SCSI_FUTURE_DOMAIN
+ tristate "Future Domain 16xx SCSI/AHA-2920A support"
+ depends on (ISA || PCI) && SCSI
+ ---help---
+ This is support for Future Domain's 16-bit SCSI host adapters
+ (TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and
+ other adapters based on the Future Domain chipsets (Quantum
+ ISA-200S, ISA-250MG; Adaptec AHA-2920A; and at least one IBM board).
+ It is explained in section 3.7 of the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ NOTE: Newer Adaptec AHA-2920C boards use the Adaptec AIC-7850 chip
+ and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI
+ controller support"). This Future Domain driver works with the older
+ Adaptec AHA-2920A boards with a Future Domain chip on them.
+
+ To compile this driver as a module, choose M here: the
+ module will be called fdomain.
+
+config SCSI_FD_MCS
+ tristate "Future Domain MCS-600/700 SCSI support"
+ depends on MCA_LEGACY && SCSI
+ ---help---
+ This is support for Future Domain MCS 600/700 MCA SCSI adapters.
+ Some PS/2 computers are equipped with IBM Fast SCSI Adapter/A which
+ is identical to the MCS 700 and hence also supported by this driver.
+ This driver also supports the Reply SB16/SCSI card (the SCSI part).
+ It supports multiple adapters in the same system.
+
+ To compile this driver as a module, choose M here: the
+ module will be called fd_mcs.
+
+config SCSI_GDTH
+ tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
+ depends on (ISA || EISA || PCI) && SCSI && (BROKEN || !SPARC64)
+ ---help---
+ Formerly called GDT SCSI Disk Array Controller Support.
+
+ This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI)
+ manufactured by Intel Corporation/ICP vortex GmbH. It is documented
+ in the kernel source in <file:drivers/scsi/gdth.c> and
+ <file:drivers/scsi/gdth.h.>
+
+ To compile this driver as a module, choose M here: the
+ module will be called gdth.
+
+config SCSI_GENERIC_NCR5380
+ tristate "Generic NCR5380/53c400 SCSI PIO support"
+ depends on ISA && SCSI
+ ---help---
+ This is a driver for the old NCR 53c80 series of SCSI controllers
+ on boards using PIO. Most boards such as the Trantor T130 fit this
+ category, along with a large number of ISA 8bit controllers shipped
+ for free with SCSI scanners. If you have a PAS16, T128 or DMX3191
+ you should select the specific driver for that card rather than
+ generic 5380 support.
+
+ It is explained in section 3.8 of the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. If it doesn't work out
+ of the box, you may have to change some settings in
+ <file:drivers/scsi/g_NCR5380.h>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called g_NCR5380.
+
+config SCSI_GENERIC_NCR5380_MMIO
+ tristate "Generic NCR5380/53c400 SCSI MMIO support"
+ depends on ISA && SCSI
+ ---help---
+ This is a driver for the old NCR 53c80 series of SCSI controllers
+ on boards using memory mapped I/O.
+ It is explained in section 3.8 of the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. If it doesn't work out
+ of the box, you may have to change some settings in
+ <file:drivers/scsi/g_NCR5380.h>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called g_NCR5380_mmio.
+
+config SCSI_GENERIC_NCR53C400
+ bool "Enable NCR53c400 extensions"
+ depends on SCSI_GENERIC_NCR5380
+ help
+ This enables certain optimizations for the NCR53c400 SCSI cards.
+ You might as well try it out. Note that this driver will only probe
+ for the Trantor T130B in its default configuration; you might have
+ to pass a command line option to the kernel at boot time if it does
+ not detect your card. See the file
+ <file:Documentation/scsi/g_NCR5380.txt> for details.
+
+config SCSI_IBMMCA
+ tristate "IBMMCA SCSI support"
+ depends on MCA_LEGACY && SCSI
+ ---help---
+ This is support for the IBM SCSI adapter found in many of the PS/2
+ series computers. These machines have an MCA bus, so you need to
+ answer Y to "MCA support" as well and read
+ <file:Documentation/mca.txt>.
+
+ If the adapter isn't found during boot (a common problem for models
+ 56, 57, 76, and 77) you'll need to use the 'ibmmcascsi=<pun>' kernel
+ option, where <pun> is the id of the SCSI subsystem (usually 7, but
+ if that doesn't work check your reference diskette). Owners of
+ model 95 with a LED-matrix-display can in addition activate some
+ activity info like under OS/2, but more informative, by setting
+ 'ibmmcascsi=display' as an additional kernel parameter. Try "man
+ bootparam" or see the documentation of your boot loader about how to
+ pass options to the kernel.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ibmmca.
+
+config IBMMCA_SCSI_ORDER_STANDARD
+ bool "Standard SCSI-order"
+ depends on SCSI_IBMMCA
+ ---help---
+ In the PC-world and in most modern SCSI-BIOS-setups, SCSI-hard disks
+ are assigned to the drive letters, starting with the lowest SCSI-id
+ (physical number -- pun) to be drive C:, as seen from DOS and
+ similar operating systems. When looking into papers describing the
+ ANSI-SCSI-standard, this assignment of drives appears to be wrong.
+ The SCSI-standard follows a hardware-hierarchy which says that id 7
+ has the highest priority and id 0 the lowest. Therefore, the host
+ adapters are still today everywhere placed as SCSI-id 7 by default.
+ In the SCSI-standard, the drive letters express the priority of the
+ disk. C: should be the hard disk, or a partition on it, with the
+ highest priority. This must therefore be the disk with the highest
+ SCSI-id (e.g. 6) and not the one with the lowest! IBM-BIOS kept the
+ original definition of the SCSI-standard as also industrial- and
+ process-control-machines, like VME-CPUs running under realtime-OSes
+ (e.g. LynxOS, OS9) do.
+
+ If you like to run Linux on your MCA-machine with the same
+ assignment of hard disks as seen from e.g. DOS or OS/2 on your
+ machine, which is in addition conformant to the SCSI-standard, you
+ must say Y here. This is also necessary for MCA-Linux users who want
+ to keep downward compatibility to older releases of the
+ IBM-MCA-SCSI-driver (older than driver-release 2.00 and older than
+ June 1997).
+
+ If you like to have the lowest SCSI-id assigned as drive C:, as
+ modern SCSI-BIOSes do, which does not conform to the standard, but
+ is widespread and common in the PC-world of today, you must say N
+ here. If unsure, say Y.
+
+config IBMMCA_SCSI_DEV_RESET
+ bool "Reset SCSI-devices at boottime"
+ depends on SCSI_IBMMCA
+ ---help---
+ By default, SCSI-devices are reset when the machine is powered on.
+ However, some devices exist, like special-control-devices,
+ SCSI-CNC-machines, SCSI-printer or scanners of older type, that do
+ not reset when switched on. If you say Y here, each device connected
+ to your SCSI-bus will be issued a reset-command after it has been
+ probed, while the kernel is booting. This may cause problems with
+ more modern devices, like hard disks, which do not appreciate these
+ reset commands, and can cause your system to hang. So say Y only if
+ you know that one of your older devices needs it; N is the safe
+ answer.
+
+config SCSI_IPS
+ tristate "IBM ServeRAID support"
+ depends on PCI && SCSI
+ ---help---
+ This is support for the IBM ServeRAID hardware RAID controllers.
+ See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
+ for more information. If this driver does not work correctly
+ without modification please contact the author by email at
+ <ipslinux@adaptec.com>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ips.
+
+config SCSI_IBMVSCSI
+ tristate "IBM Virtual SCSI support"
+ depends on PPC_PSERIES || PPC_ISERIES
+ help
+ This is the IBM POWER Virtual SCSI Client
+
+ To compile this driver as a module, choose M here: the
+ module will be called ibmvscsic.
+
+config SCSI_INITIO
+ tristate "Initio 9100U(W) support"
+ depends on PCI && SCSI
+ help
+ This is support for the Initio 91XXU(W) SCSI host adapter. Please
+ read the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called initio.
+
+config SCSI_INIA100
+ tristate "Initio INI-A100U2W support"
+ depends on PCI && SCSI
+ help
+ This is support for the Initio INI-A100U2W SCSI host adapter.
+ Please read the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called a100u2w.
+
+config SCSI_PPA
+ tristate "IOMEGA parallel port (ppa - older drives)"
+ depends on SCSI && PARPORT
+ ---help---
+ This driver supports older versions of IOMEGA's parallel port ZIP
+ drive (a 100 MB removable media device).
+
+ Note that you can say N here if you have the SCSI version of the ZIP
+ drive: it will be supported automatically if you said Y to the
+ generic "SCSI disk support", above.
+
+ If you have the ZIP Plus drive or a more recent parallel port ZIP
+ drive (if the supplied cable with the drive is labeled "AutoDetect")
+ then you should say N here and Y to "IOMEGA parallel port (imm -
+ newer drives)", below.
+
+ For more information about this driver and how to use it you should
+ read the file <file:Documentation/scsi/ppa.txt>. You should also read
+ the SCSI-HOWTO, which is available from
+ <http://www.tldp.org/docs.html#howto>. If you use this driver,
+ you will still be able to use the parallel port for other tasks,
+ such as a printer; it is safe to compile both drivers into the
+ kernel.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ppa.
+
+config SCSI_IMM
+ tristate "IOMEGA parallel port (imm - newer drives)"
+ depends on SCSI && PARPORT
+ ---help---
+ This driver supports newer versions of IOMEGA's parallel port ZIP
+ drive (a 100 MB removable media device).
+
+ Note that you can say N here if you have the SCSI version of the ZIP
+ drive: it will be supported automatically if you said Y to the
+ generic "SCSI disk support", above.
+
+ If you have the ZIP Plus drive or a more recent parallel port ZIP
+ drive (if the supplied cable with the drive is labeled "AutoDetect")
+ then you should say Y here; if you have an older ZIP drive, say N
+ here and Y to "IOMEGA Parallel Port (ppa - older drives)", above.
+
+ For more information about this driver and how to use it you should
+ read the file <file:Documentation/scsi/ppa.txt>. You should also read
+ the SCSI-HOWTO, which is available from
+ <http://www.tldp.org/docs.html#howto>. If you use this driver,
+ you will still be able to use the parallel port for other tasks,
+ such as a printer; it is safe to compile both drivers into the
+ kernel.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imm.
+
+config SCSI_IZIP_EPP16
+ bool "ppa/imm option - Use slow (but safe) EPP-16"
+ depends on PARPORT && (SCSI_PPA || SCSI_IMM)
+ ---help---
+ EPP (Enhanced Parallel Port) is a standard for parallel ports which
+ allows them to act as expansion buses that can handle up to 64
+ peripheral devices.
+
+ Some parallel port chipsets are slower than their motherboard, and
+ so we have to control the state of the chipset's FIFO queue every
+ now and then to avoid data loss. This will be done if you say Y
+ here.
+
+ Generally, saying Y is the safe option and slows things down a bit.
+
+config SCSI_IZIP_SLOW_CTR
+ bool "ppa/imm option - Assume slow parport control register"
+ depends on PARPORT && (SCSI_PPA || SCSI_IMM)
+ help
+ Some parallel ports are known to have excessive delays between
+ changing the parallel port control register and good data being
+ available on the parallel port data/status register. This option
+ forces a small delay (1.0 usec to be exact) after changing the
+ control register to let things settle out. Enabling this option may
+ result in a big drop in performance but some very old parallel ports
+ (found in 386 vintage machines) will not work properly.
+
+ Generally, saying N is fine.
+
+config SCSI_NCR53C406A
+ tristate "NCR53c406a SCSI support"
+ depends on ISA && SCSI
+ help
+ This is support for the NCR53c406a SCSI host adapter. For user
+ configurable parameters, check out <file:drivers/scsi/NCR53c406a.c>
+ in the kernel source. Also read the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called NCR53c406.
+
+config SCSI_NCR_D700
+ tristate "NCR Dual 700 MCA SCSI support"
+ depends on MCA && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ This is a driver for the MicroChannel Dual 700 card produced by
+ NCR and commonly used in 345x/35xx/4100 class machines. It always
+ tries to negotiate sync and uses tag command queueing.
+
+ Unless you have an NCR manufactured machine, the chances are that
+ you do not have this SCSI card, so say N.
+
+config 53C700_IO_MAPPED
+ bool
+ depends on SCSI_NCR_D700
+ default y
+
+config SCSI_LASI700
+ tristate "HP Lasi SCSI support for 53c700/710"
+ depends on GSC && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ This is a driver for the SCSI controller in the Lasi chip found in
+ many PA-RISC workstations & servers. If you do not know whether you
+ have a Lasi chip, it is safe to say "Y" here.
+
+config 53C700_MEM_MAPPED
+ bool
+ depends on SCSI_LASI700
+ default y
+
+config 53C700_LE_ON_BE
+ bool
+ depends on SCSI_LASI700
+ default y
+
+config SCSI_SYM53C8XX_2
+ tristate "SYM53C8XX Version 2 SCSI support"
+ depends on PCI && SCSI
+ select SCSI_SPI_ATTRS
+ ---help---
+ This driver supports the whole NCR53C8XX/SYM53C8XX family of
+ PCI-SCSI controllers. It also supports the subset of LSI53C10XX
+ Ultra-160 controllers that are based on the SYM53C8XX SCRIPTS
+ language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI
+ controllers; you need to use the Fusion MPT driver for that.
+
+ Please read <file:Documentation/scsi/sym53c8xx_2.txt> for more
+ information.
+
+config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
+ int "DMA addressing mode"
+ depends on SCSI_SYM53C8XX_2
+ default "1"
+ ---help---
+ This option only applies to PCI-SCSI chips that are PCI DAC
+ capable (875A, 895A, 896, 1010-33, 1010-66, 1000).
+
+ When set to 0, the driver will program the chip to only perform
+ 32-bit DMA. When set to 1, the chip will be able to perform DMA
+ to addresses up to 1TB. When set to 2, the driver supports the
+ full 64-bit DMA address range, but can only address 16 segments
+ of 4 GB each. This limits the total addressable range to 64 GB.
+
+ Most machines with less than 4GB of memory should use a setting
+ of 0 for best performance. If your machine has 4GB of memory
+ or more, you should set this option to 1 (the default).
+
+ The still experimental value 2 (64 bit DMA addressing with 16
+ x 4GB segments limitation) can be used on systems that require
+ PCI address bits past bit 39 to be set for the addressing of
+ memory using PCI DAC cycles.
+
+config SCSI_SYM53C8XX_DEFAULT_TAGS
+ int "default tagged command queue depth"
+ depends on SCSI_SYM53C8XX_2
+ default "16"
+ help
+ This is the default value of the command queue depth the
+ driver will announce to the generic SCSI layer for devices
+ that support tagged command queueing. This value can be changed
+ from the boot command line. This is a soft limit that cannot
+ exceed CONFIG_SCSI_SYM53C8XX_MAX_TAGS.
+
+config SCSI_SYM53C8XX_MAX_TAGS
+ int "maximum number of queued commands"
+ depends on SCSI_SYM53C8XX_2
+ default "64"
+ help
+ This option allows you to specify the maximum number of commands
+ that can be queued to any device, when tagged command queuing is
+ possible. The driver supports up to 256 queued commands per device.
+ This value is used as a compiled-in hard limit.
+
+config SCSI_SYM53C8XX_IOMAPPED
+ bool "use port IO"
+ depends on SCSI_SYM53C8XX_2
+ help
+ If you say Y here, the driver will use port IO to access
+ the card. This is significantly slower then using memory
+ mapped IO. Most people should answer N.
+
+config SCSI_IPR
+ tristate "IBM Power Linux RAID adapter support"
+ depends on PCI && SCSI
+ select FW_LOADER
+ ---help---
+ This driver supports the IBM Power Linux family RAID adapters.
+ This includes IBM pSeries 5712, 5703, 5709, and 570A, as well
+ as IBM iSeries 5702, 5703, 5709, and 570A.
+
+config SCSI_IPR_TRACE
+ bool "enable driver internal trace"
+ depends on SCSI_IPR
+ help
+ If you say Y here, the driver will trace all commands issued
+ to the adapter. Performance impact is minimal. Trace can be
+ dumped using /sys/bus/class/scsi_host/hostXX/trace.
+
+config SCSI_IPR_DUMP
+ bool "enable adapter dump support"
+ depends on SCSI_IPR
+ help
+ If you say Y here, the driver will support adapter crash dump.
+ If you enable this support, the iprdump daemon can be used
+ to capture adapter failure analysis information.
+
+config SCSI_ZALON
+ tristate "Zalon SCSI support"
+ depends on GSC && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ The Zalon is a GSC/HSC bus interface chip that sits between the
+ PA-RISC processor and the NCR 53c720 SCSI controller on C100,
+ C110, J200, J210 and some D, K & R-class machines. It's also
+ used on the add-in Bluefish, Barracuda & Shrike SCSI cards.
+ Say Y here if you have one of these machines or cards.
+
+config SCSI_NCR_Q720
+ tristate "NCR Quad 720 MCA SCSI support"
+ depends on MCA && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ This is a driver for the MicroChannel Quad 720 card produced by
+ NCR and commonly used in 345x/35xx/4100 class machines. It always
+ tries to negotiate sync and uses tag command queueing.
+
+ Unless you have an NCR manufactured machine, the chances are that
+ you do not have this SCSI card, so say N.
+
+config SCSI_NCR53C8XX_DEFAULT_TAGS
+ int " default tagged command queue depth"
+ depends on SCSI_ZALON || SCSI_NCR_Q720
+ default "8"
+ ---help---
+ "Tagged command queuing" is a feature of SCSI-2 which improves
+ performance: the host adapter can send several SCSI commands to a
+ device's queue even if previous commands haven't finished yet.
+ Because the device is intelligent, it can optimize its operations
+ (like head positioning) based on its own request queue. Some SCSI
+ devices don't implement this properly; if you want to disable this
+ feature, enter 0 or 1 here (it doesn't matter which).
+
+ The default value is 8 and should be supported by most hard disks.
+ This value can be overridden from the boot command line using the
+ 'tags' option as follows (example):
+ 'ncr53c8xx=tags:4/t2t3q16/t0u2q10' will set default queue depth to
+ 4, set queue depth to 16 for target 2 and target 3 on controller 0
+ and set queue depth to 10 for target 0 / lun 2 on controller 1.
+
+ The normal answer therefore is to go with the default 8 and to use
+ a boot command line option for devices that need to use a different
+ command queue depth.
+
+ There is no safe option other than using good SCSI devices.
+
+config SCSI_NCR53C8XX_MAX_TAGS
+ int " maximum number of queued commands"
+ depends on SCSI_ZALON || SCSI_NCR_Q720
+ default "32"
+ ---help---
+ This option allows you to specify the maximum number of commands
+ that can be queued to any device, when tagged command queuing is
+ possible. The default value is 32. Minimum is 2, maximum is 64.
+ Modern hard disks are able to support 64 tags and even more, but
+ do not seem to be faster when more than 32 tags are being used.
+
+ So, the normal answer here is to go with the default value 32 unless
+ you are using very large hard disks with large cache (>= 1 MB) that
+ are able to take advantage of more than 32 tagged commands.
+
+ There is no safe option and the default answer is recommended.
+
+config SCSI_NCR53C8XX_SYNC
+ int " synchronous transfers frequency in MHz"
+ depends on SCSI_ZALON || SCSI_NCR_Q720
+ default "20"
+ ---help---
+ The SCSI Parallel Interface-2 Standard defines 5 classes of transfer
+ rates: FAST-5, FAST-10, FAST-20, FAST-40 and FAST-80. The numbers
+ are respectively the maximum data transfer rates in mega-transfers
+ per second for each class. For example, a FAST-20 Wide 16 device is
+ able to transfer data at 20 million 16 bit packets per second for a
+ total rate of 40 MB/s.
+
+ You may specify 0 if you want to only use asynchronous data
+ transfers. This is the safest and slowest option. Otherwise, specify
+ a value between 5 and 80, depending on the capability of your SCSI
+ controller. The higher the number, the faster the data transfer.
+ Note that 80 should normally be ok since the driver decreases the
+ value automatically according to the controller's capabilities.
+
+ Your answer to this question is ignored for controllers with NVRAM,
+ since the driver will get this information from the user set-up. It
+ also can be overridden using a boot setup option, as follows
+ (example): 'ncr53c8xx=sync:12' will allow the driver to negotiate
+ for FAST-20 synchronous data transfer (20 mega-transfers per
+ second).
+
+ The normal answer therefore is not to go with the default but to
+ select the maximum value 80 allowing the driver to use the maximum
+ value supported by each controller. If this causes problems with
+ your SCSI devices, you should come back and decrease the value.
+
+ There is no safe option other than using good cabling, right
+ terminations and SCSI conformant devices.
+
+config SCSI_NCR53C8XX_PROFILE
+ bool " enable profiling"
+ depends on SCSI_ZALON || SCSI_NCR_Q720
+ help
+ This option allows you to enable profiling information gathering.
+ These statistics are not very accurate due to the low frequency
+ of the kernel clock (100 Hz on i386) and have performance impact
+ on systems that use very fast devices.
+
+ The normal answer therefore is N.
+
+config SCSI_NCR53C8XX_NO_DISCONNECT
+ bool " not allow targets to disconnect"
+ depends on (SCSI_ZALON || SCSI_NCR_Q720) && SCSI_NCR53C8XX_DEFAULT_TAGS=0
+ help
+ This option is only provided for safety if you suspect some SCSI
+ device of yours to not support properly the target-disconnect
+ feature. In that case, you would say Y here. In general however, to
+ not allow targets to disconnect is not reasonable if there is more
+ than 1 device on a SCSI bus. The normal answer therefore is N.
+
+config SCSI_MCA_53C9X
+ tristate "NCR MCA 53C9x SCSI support"
+ depends on MCA_LEGACY && SCSI && BROKEN_ON_SMP
+ help
+ Some MicroChannel machines, notably the NCR 35xx line, use a SCSI
+ controller based on the NCR 53C94. This driver will allow use of
+ the controller on the 3550, and very possibly others.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mca_53c9x.
+
+config SCSI_PAS16
+ tristate "PAS16 SCSI support"
+ depends on ISA && SCSI
+ ---help---
+ This is support for a SCSI host adapter. It is explained in section
+ 3.10 of the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. If it doesn't work out
+ of the box, you may have to change some settings in
+ <file:drivers/scsi/pas16.h>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pas16.
+
+config SCSI_PCI2000
+ tristate "PCI2000 support"
+ depends on PCI && SCSI && BROKEN
+ help
+ This is support for the PCI2000I EIDE interface card which acts as a
+ SCSI host adapter. Please read the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pci2000.
+
+config SCSI_PCI2220I
+ tristate "PCI2220i support"
+ depends on PCI && SCSI && BROKEN
+ help
+ This is support for the PCI2220i EIDE interface card which acts as a
+ SCSI host adapter. Please read the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pci2220i.
+
+config SCSI_PSI240I
+ tristate "PSI240i support"
+ depends on ISA && SCSI
+ help
+ This is support for the PSI240i EIDE interface card which acts as a
+ SCSI host adapter. Please read the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called psi240i.
+
+config SCSI_QLOGIC_FAS
+ tristate "Qlogic FAS SCSI support"
+ depends on ISA && SCSI
+ ---help---
+ This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic
+ FastSCSI! cards as well as any other card based on the FASXX chip
+ (including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards).
+
+ This driver does NOT support the PCI versions of these cards. The
+ PCI versions are supported by the Qlogic ISP driver ("Qlogic ISP
+ SCSI support"), below.
+
+ Information about this driver is contained in
+ <file:Documentation/scsi/qlogicfas.txt>. You should also read the
+ SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called qlogicfas.
+
+config SCSI_QLOGIC_ISP
+ tristate "Qlogic ISP SCSI support (old driver)"
+ depends on PCI && SCSI && BROKEN
+ ---help---
+ This driver works for all QLogic PCI SCSI host adapters (IQ-PCI,
+ IQ-PCI-10, IQ_PCI-D) except for the PCI-basic card. (This latter
+ card is supported by the "AM53/79C974 PCI SCSI" driver.)
+
+ If you say Y here, make sure to choose "BIOS" at the question "PCI
+ access mode".
+
+ Please read the file <file:Documentation/scsi/qlogicisp.txt>. You
+ should also read the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called qlogicisp.
+
+ These days the hardware is also supported by the more modern qla1280
+ driver. In doubt use that one instead of qlogicisp.
+
+config SCSI_QLOGIC_FC
+ tristate "Qlogic ISP FC SCSI support"
+ depends on PCI && SCSI
+ help
+ This is a driver for the QLogic ISP2100 SCSI-FCP host adapter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called qlogicfc.
+
+config SCSI_QLOGIC_FC_FIRMWARE
+ bool "Include loadable firmware in driver"
+ depends on SCSI_QLOGIC_FC
+ help
+ Say Y to include ISP2X00 Fabric Initiator/Target Firmware, with
+ expanded LUN addressing and FcTape (FCP-2) support, in the
+ qlogicfc driver. This is required on some platforms.
+
+config SCSI_QLOGIC_1280
+ tristate "Qlogic QLA 1240/1x80/1x160 SCSI support"
+ depends on PCI && SCSI
+ help
+ Say Y if you have a QLogic ISP1240/1x80/1x160 SCSI host adapter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called qla1280.
+
+config SCSI_QLOGIC_1280_1040
+ bool "Qlogic QLA 1020/1040 SCSI support"
+ depends on SCSI_QLOGIC_1280 && SCSI_QLOGIC_ISP!=y
+ help
+ Say Y here if you have a QLogic ISP1020/1040 SCSI host adapter and
+ do not want to use the old driver. This option enables support in
+ the qla1280 driver for those host adapters.
+
+config SCSI_QLOGICPTI
+ tristate "PTI Qlogic, ISP Driver"
+ depends on SBUS && SCSI
+ help
+ This driver supports SBUS SCSI controllers from PTI or QLogic. These
+ controllers are known under Solaris as qpti and in the openprom as
+ PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are
+ driven by a different driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called qlogicpti.
+
+source "drivers/scsi/qla2xxx/Kconfig"
+
+config SCSI_SEAGATE
+ tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
+ depends on X86 && ISA && SCSI && BROKEN
+ ---help---
+ These are 8-bit SCSI controllers; the ST-01 is also supported by
+ this driver. It is explained in section 3.9 of the SCSI-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>. If it
+ doesn't work out of the box, you may have to change some settings in
+ <file:drivers/scsi/seagate.h>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called seagate.
+
+# definitely looks not 64bit safe:
+config SCSI_SIM710
+ tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
+ depends on (EISA || MCA) && SCSI
+ select SCSI_SPI_ATTRS
+ ---help---
+ This driver for NCR53c710 based SCSI host adapters.
+
+ It currently supports Compaq EISA cards and NCR MCA cards
+
+config 53C700_IO_MAPPED
+ bool
+ depends on SCSI_SIM710
+ default y
+
+config SCSI_SYM53C416
+ tristate "Symbios 53c416 SCSI support"
+ depends on ISA && SCSI
+ ---help---
+ This is support for the sym53c416 SCSI host adapter, the SCSI
+ adapter that comes with some HP scanners. This driver requires that
+ the sym53c416 is configured first using some sort of PnP
+ configuration program (e.g. isapnp) or by a PnP aware BIOS. If you
+ are using isapnp then you need to compile this driver as a module
+ and then load it using insmod after isapnp has run. The parameters
+ of the configured card(s) should be passed to the driver. The format
+ is:
+
+ insmod sym53c416 sym53c416=<base>,<irq> [sym53c416_1=<base>,<irq>]
+
+ To compile this driver as a module, choose M here: the
+ module will be called sym53c416.
+
+config SCSI_DC395x
+ tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support (EXPERIMENTAL)"
+ depends on PCI && SCSI && EXPERIMENTAL
+ ---help---
+ This driver supports PCI SCSI host adapters based on the ASIC
+ TRM-S1040 chip, e.g Tekram DC395(U/UW/F) and DC315(U) variants.
+
+ This driver works, but is still in experimental status. So better
+ have a bootable disk and a backup in case of emergency.
+
+ Documentation can be found in <file:Documentation/scsi/dc395x.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dc395x.
+
+config SCSI_DC390T
+ tristate "Tekram DC390(T) and Am53/79C974 SCSI support"
+ depends on PCI && SCSI
+ ---help---
+ This driver supports PCI SCSI host adapters based on the Am53C974A
+ chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
+ PCscsi/PCnet (Am53/79C974) solutions.
+
+ Documentation can be found in <file:Documentation/scsi/tmscsim.txt>.
+
+ Note that this driver does NOT support Tekram DC390W/U/F, which are
+ based on NCR/Symbios chips. Use "NCR53C8XX SCSI support" for those.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tmscsim.
+
+config SCSI_T128
+ tristate "Trantor T128/T128F/T228 SCSI support"
+ depends on ISA && SCSI
+ ---help---
+ This is support for a SCSI host adapter. It is explained in section
+ 3.11 of the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. If it doesn't work out
+ of the box, you may have to change some settings in
+ <file:drivers/scsi/t128.h>. Note that Trantor was purchased by
+ Adaptec, and some former Trantor products are being sold under the
+ Adaptec name.
+
+ To compile this driver as a module, choose M here: the
+ module will be called t128.
+
+config SCSI_U14_34F
+ tristate "UltraStor 14F/34F support"
+ depends on ISA && SCSI
+ ---help---
+ This is support for the UltraStor 14F and 34F SCSI-2 host adapters.
+ The source at <file:drivers/scsi/u14-34f.c> contains some
+ information about this hardware. If the driver doesn't work out of
+ the box, you may have to change some settings in
+ <file: drivers/scsi/u14-34f.c>. Read the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Note that there is also
+ another driver for the same hardware: "UltraStor SCSI support",
+ below. You should say Y to both only if you want 24F support as
+ well.
+
+ To compile this driver as a module, choose M here: the
+ module will be called u14-34f.
+
+config SCSI_U14_34F_TAGGED_QUEUE
+ bool "enable tagged command queueing"
+ depends on SCSI_U14_34F
+ help
+ This is a feature of SCSI-2 which improves performance: the host
+ adapter can send several SCSI commands to a device's queue even if
+ previous commands haven't finished yet.
+ This is equivalent to the "u14-34f=tc:y" boot option.
+
+config SCSI_U14_34F_LINKED_COMMANDS
+ bool "enable elevator sorting"
+ depends on SCSI_U14_34F
+ help
+ This option enables elevator sorting for all probed SCSI disks and
+ CD-ROMs. It definitely reduces the average seek distance when doing
+ random seeks, but this does not necessarily result in a noticeable
+ performance improvement: your mileage may vary...
+ This is equivalent to the "u14-34f=lc:y" boot option.
+
+config SCSI_U14_34F_MAX_TAGS
+ int "maximum number of queued commands"
+ depends on SCSI_U14_34F
+ default "8"
+ help
+ This specifies how many SCSI commands can be maximally queued for
+ each probed SCSI device. You should reduce the default value of 8
+ only if you have disks with buggy or limited tagged command support.
+ Minimum is 2 and maximum is 14. This value is also the window size
+ used by the elevator sorting option above. The effective value used
+ by the driver for each probed SCSI device is reported at boot time.
+ This is equivalent to the "u14-34f=mq:8" boot option.
+
+config SCSI_ULTRASTOR
+ tristate "UltraStor SCSI support"
+ depends on X86 && ISA && SCSI
+ ---help---
+ This is support for the UltraStor 14F, 24F and 34F SCSI-2 host
+ adapter family. This driver is explained in section 3.12 of the
+ SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. If it doesn't work out
+ of the box, you may have to change some settings in
+ <file:drivers/scsi/ultrastor.h>.
+
+ Note that there is also another driver for the same hardware:
+ "UltraStor 14F/34F support", above.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ultrastor.
+
+config SCSI_NSP32
+ tristate "Workbit NinjaSCSI-32Bi/UDE support"
+ depends on PCI && SCSI && !64BIT
+ help
+ This is support for the Workbit NinjaSCSI-32Bi/UDE PCI/Cardbus
+ SCSI host adapter. Please read the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called nsp32.
+
+config SCSI_DEBUG
+ tristate "SCSI debugging host simulator"
+ depends on SCSI
+ help
+ This is a host adapter simulator that can simulate multiple hosts
+ each with multiple dummy SCSI devices (disks). It defaults to one
+ host adapter with one dummy SCSI disk. Each dummy disk uses kernel
+ RAM as storage (i.e. it is a ramdisk). To save space when multiple
+ dummy disks are simulated, they share the same kernel RAM for
+ their storage. See <http://www.torque.net/sg/sdebug.html> for more
+ information. This driver is primarily of use to those testing the
+ SCSI and block subsystems. If unsure, say N.
+
+config SCSI_MESH
+ tristate "MESH (Power Mac internal SCSI) support"
+ depends on PPC32 && PPC_PMAC && SCSI
+ help
+ Many Power Macintoshes and clones have a MESH (Macintosh Enhanced
+ SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the
+ other Power Macintoshes do). Say Y to include support for this SCSI
+ adaptor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mesh.
+
+config SCSI_MESH_SYNC_RATE
+ int "maximum synchronous transfer rate (MB/s) (0 = async)"
+ depends on SCSI_MESH
+ default "5"
+ help
+ On Power Macintoshes (and clones) where the MESH SCSI bus adaptor
+ drives a bus which is entirely internal to the machine (such as the
+ 7500, 7600, 8500, etc.), the MESH is capable of synchronous
+ operation at up to 10 MB/s. On machines where the SCSI bus
+ controlled by the MESH can have external devices connected, it is
+ usually rated at 5 MB/s. 5 is a safe value here unless you know the
+ MESH SCSI bus is internal only; in that case you can say 10. Say 0
+ to disable synchronous operation.
+
+config SCSI_MESH_RESET_DELAY_MS
+ int "initial bus reset delay (ms) (0 = no reset)"
+ depends on SCSI_MESH
+ default "4000"
+
+config SCSI_MAC53C94
+ tristate "53C94 (Power Mac external SCSI) support"
+ depends on PPC32 && PPC_PMAC && SCSI
+ help
+ On Power Macintoshes (and clones) with two SCSI buses, the external
+ SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older
+ machines which only have one SCSI bus, such as the 7200, also use
+ the 53C94. Say Y to include support for the 53C94.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mac53c94.
+
+source "drivers/scsi/arm/Kconfig"
+
+config JAZZ_ESP
+ bool "MIPS JAZZ FAS216 SCSI support"
+ depends on MACH_JAZZ && SCSI
+ help
+ This is the driver for the onboard SCSI host adapter of MIPS Magnum
+ 4000, Acer PICA, Olivetti M700-10 and a few other identical OEM
+ systems.
+
+config A3000_SCSI
+ tristate "A3000 WD33C93A support"
+ depends on AMIGA && SCSI
+ help
+ If you have an Amiga 3000 and have SCSI devices connected to the
+ built-in SCSI controller, say Y. Otherwise, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called wd33c93.
+
+config A2091_SCSI
+ tristate "A2091/A590 WD33C93A support"
+ depends on ZORRO && SCSI
+ help
+ If you have a Commodore A2091 SCSI controller, say Y. Otherwise,
+ say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called wd33c93.
+
+config GVP11_SCSI
+ tristate "GVP Series II WD33C93A support"
+ depends on ZORRO && SCSI
+ ---help---
+ If you have a Great Valley Products Series II SCSI controller,
+ answer Y. Also say Y if you have a later model of GVP SCSI
+ controller (such as the GVP A4008 or a Combo board). Otherwise,
+ answer N. This driver does NOT work for the T-Rex series of
+ accelerators from TekMagic and GVP-M.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gvp11.
+
+config CYBERSTORM_SCSI
+ tristate "CyberStorm SCSI support"
+ depends on ZORRO && SCSI
+ help
+ If you have an Amiga with an original (MkI) Phase5 Cyberstorm
+ accelerator board and the optional Cyberstorm SCSI controller,
+ answer Y. Otherwise, say N.
+
+config CYBERSTORMII_SCSI
+ tristate "CyberStorm Mk II SCSI support"
+ depends on ZORRO && SCSI
+ help
+ If you have an Amiga with a Phase5 Cyberstorm MkII accelerator board
+ and the optional Cyberstorm SCSI controller, say Y. Otherwise,
+ answer N.
+
+config BLZ2060_SCSI
+ tristate "Blizzard 2060 SCSI support"
+ depends on ZORRO && SCSI
+ help
+ If you have an Amiga with a Phase5 Blizzard 2060 accelerator board
+ and want to use the onboard SCSI controller, say Y. Otherwise,
+ answer N.
+
+config BLZ1230_SCSI
+ tristate "Blizzard 1230IV/1260 SCSI support"
+ depends on ZORRO && SCSI
+ help
+ If you have an Amiga 1200 with a Phase5 Blizzard 1230IV or Blizzard
+ 1260 accelerator, and the optional SCSI module, say Y. Otherwise,
+ say N.
+
+config FASTLANE_SCSI
+ tristate "Fastlane SCSI support"
+ depends on ZORRO && SCSI
+ help
+ If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use
+ one in the near future, say Y to this question. Otherwise, say N.
+
+config SCSI_AMIGA7XX
+ bool "Amiga NCR53c710 SCSI support (EXPERIMENTAL)"
+ depends on AMIGA && SCSI && EXPERIMENTAL && BROKEN
+ help
+ Support for various NCR53c710-based SCSI controllers on the Amiga.
+ This includes:
+ - the builtin SCSI controller on the Amiga 4000T,
+ - the Amiga 4091 Zorro III SCSI-2 controller,
+ - the MacroSystem Development's WarpEngine Amiga SCSI-2 controller
+ (info at
+ <http://www.lysator.liu.se/amiga/ar/guide/ar310.guide?FEATURE5>),
+ - the SCSI controller on the Phase5 Blizzard PowerUP 603e+
+ accelerator card for the Amiga 1200,
+ - the SCSI controller on the GVP Turbo 040/060 accelerator.
+ Note that all of the above SCSI controllers, except for the builtin
+ SCSI controller on the Amiga 4000T, reside on the Zorro expansion
+ bus, so you also have to enable Zorro bus support if you want to use
+ them.
+
+config OKTAGON_SCSI
+ tristate "BSC Oktagon SCSI support (EXPERIMENTAL)"
+ depends on ZORRO && SCSI && EXPERIMENTAL
+ help
+ If you have the BSC Oktagon SCSI disk controller for the Amiga, say
+ Y to this question. If you're in doubt about whether you have one,
+ see the picture at
+ <http://amiga.resource.cx/exp/search.pl?product=oktagon>.
+
+config ATARI_SCSI
+ tristate "Atari native SCSI support"
+ depends on ATARI && SCSI && BROKEN
+ ---help---
+ If you have an Atari with built-in NCR5380 SCSI controller (TT,
+ Falcon, ...) say Y to get it supported. Of course also, if you have
+ a compatible SCSI controller (e.g. for Medusa).
+
+ To compile this driver as a module, choose M here: the
+ module will be called atari_scsi.
+
+ This driver supports both styles of NCR integration into the
+ system: the TT style (separate DMA), and the Falcon style (via
+ ST-DMA, replacing ACSI). It does NOT support other schemes, like
+ in the Hades (without DMA).
+
+config ATARI_SCSI_TOSHIBA_DELAY
+ bool "Long delays for Toshiba CD-ROMs"
+ depends on ATARI_SCSI
+ help
+ This option increases the delay after a SCSI arbitration to
+ accommodate some flaky Toshiba CD-ROM drives. Say Y if you intend to
+ use a Toshiba CD-ROM drive; otherwise, the option is not needed and
+ would impact performance a bit, so say N.
+
+config ATARI_SCSI_RESET_BOOT
+ bool "Reset SCSI-devices at boottime"
+ depends on ATARI_SCSI
+ help
+ Reset the devices on your Atari whenever it boots. This makes the
+ boot process fractionally longer but may assist recovery from errors
+ that leave the devices with SCSI operations partway completed.
+
+config TT_DMA_EMUL
+ bool "Hades SCSI DMA emulator"
+ depends on ATARI_SCSI && HADES
+ help
+ This option enables code which emulates the TT SCSI DMA chip on the
+ Hades. This increases the SCSI transfer rates at least ten times
+ compared to PIO transfers.
+
+config MAC_SCSI
+ bool "Macintosh NCR5380 SCSI"
+ depends on MAC && SCSI
+ help
+ This is the NCR 5380 SCSI controller included on most of the 68030
+ based Macintoshes. If you have one of these say Y and read the
+ SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+config SCSI_MAC_ESP
+ tristate "Macintosh NCR53c9[46] SCSI"
+ depends on MAC && SCSI
+ help
+ This is the NCR 53c9x SCSI controller found on most of the 68040
+ based Macintoshes. If you have one of these say Y and read the
+ SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mac_esp.
+
+config MVME147_SCSI
+ bool "WD33C93 SCSI driver for MVME147"
+ depends on MVME147 && SCSI
+ help
+ Support for the on-board SCSI controller on the Motorola MVME147
+ single-board computer.
+
+config MVME16x_SCSI
+ bool "NCR53C710 SCSI driver for MVME16x"
+ depends on MVME16x && SCSI && BROKEN
+ help
+ The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710
+ SCSI controller chip. Almost everyone using one of these boards
+ will want to say Y to this question.
+
+config BVME6000_SCSI
+ bool "NCR53C710 SCSI driver for BVME6000"
+ depends on BVME6000 && SCSI && BROKEN
+ help
+ The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710
+ SCSI controller chip. Almost everyone using one of these boards
+ will want to say Y to this question.
+
+config SCSI_NCR53C7xx_FAST
+ bool "allow FAST-SCSI [10MHz]"
+ depends on SCSI_AMIGA7XX || MVME16x_SCSI || BVME6000_SCSI
+ help
+ This will enable 10MHz FAST-SCSI transfers with your host
+ adapter. Some systems have problems with that speed, so it's safest
+ to say N here.
+
+config SUN3_SCSI
+ tristate "Sun3 NCR5380 SCSI"
+ depends on SUN3 && SCSI
+ help
+ This option will enable support for the OBIO (onboard io) NCR5380
+ SCSI controller found in the Sun 3/50 and 3/60, as well as for
+ "Sun3" type VME scsi controllers also based on the NCR5380.
+ General Linux information on the Sun 3 series (now discontinued)
+ is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
+
+config SUN3X_ESP
+ bool "Sun3x ESP SCSI"
+ depends on SUN3X && SCSI
+ help
+ The ESP was an on-board SCSI controller used on Sun 3/80
+ machines. Say Y here to compile in support for it.
+
+config SCSI_SUNESP
+ tristate "Sparc ESP Scsi Driver"
+ depends on SBUS && SCSI
+ help
+ This is the driver for the Sun ESP SCSI host adapter. The ESP
+ chipset is present in most SPARC SBUS-based computers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called esp.
+
+# bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI
+
+config ZFCP
+ tristate "FCP host bus adapter driver for IBM eServer zSeries"
+ depends on ARCH_S390 && QDIO && SCSI
+ select SCSI_FC_ATTRS
+ help
+ If you want to access SCSI devices attached to your IBM eServer
+ zSeries by means of Fibre Channel interfaces say Y.
+ For details please refer to the documentation provided by IBM at
+ <http://oss.software.ibm.com/developerworks/opensource/linux390>
+
+ This driver is also available as a module. This module will be
+ called zfcp. If you want to compile it as a module, say M here
+ and read <file:Documentation/modules.txt>.
+
+endmenu
+
+source "drivers/scsi/pcmcia/Kconfig"
+
+endmenu