summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/NCR5380.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/NCR5380.h')
-rw-r--r--drivers/scsi/NCR5380.h432
1 files changed, 432 insertions, 0 deletions
diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h
new file mode 100644
index 000000000000..b5103f94d627
--- /dev/null
+++ b/drivers/scsi/NCR5380.h
@@ -0,0 +1,432 @@
+/*
+ * NCR 5380 defines
+ *
+ * Copyright 1993, Drew Eckhardt
+ * Visionary Computing
+ * (Unix consulting and custom programming)
+ * drew@colorado.edu
+ * +1 (303) 666-5836
+ *
+ * DISTRIBUTION RELEASE 7
+ *
+ * For more information, please consult
+ *
+ * NCR 5380 Family
+ * SCSI Protocol Controller
+ * Databook
+ * NCR Microelectronics
+ * 1635 Aeroplaza Drive
+ * Colorado Springs, CO 80916
+ * 1+ (719) 578-3400
+ * 1+ (800) 334-5454
+ */
+
+/*
+ * $Log: NCR5380.h,v $
+ */
+
+#ifndef NCR5380_H
+#define NCR5380_H
+
+#include <linux/interrupt.h>
+
+#define NCR5380_PUBLIC_RELEASE 7
+#define NCR53C400_PUBLIC_RELEASE 2
+
+#define NDEBUG_ARBITRATION 0x1
+#define NDEBUG_AUTOSENSE 0x2
+#define NDEBUG_DMA 0x4
+#define NDEBUG_HANDSHAKE 0x8
+#define NDEBUG_INFORMATION 0x10
+#define NDEBUG_INIT 0x20
+#define NDEBUG_INTR 0x40
+#define NDEBUG_LINKED 0x80
+#define NDEBUG_MAIN 0x100
+#define NDEBUG_NO_DATAOUT 0x200
+#define NDEBUG_NO_WRITE 0x400
+#define NDEBUG_PIO 0x800
+#define NDEBUG_PSEUDO_DMA 0x1000
+#define NDEBUG_QUEUES 0x2000
+#define NDEBUG_RESELECTION 0x4000
+#define NDEBUG_SELECTION 0x8000
+#define NDEBUG_USLEEP 0x10000
+#define NDEBUG_LAST_BYTE_SENT 0x20000
+#define NDEBUG_RESTART_SELECT 0x40000
+#define NDEBUG_EXTENDED 0x80000
+#define NDEBUG_C400_PREAD 0x100000
+#define NDEBUG_C400_PWRITE 0x200000
+#define NDEBUG_LISTS 0x400000
+
+#define NDEBUG_ANY 0xFFFFFFFFUL
+
+/*
+ * The contents of the OUTPUT DATA register are asserted on the bus when
+ * either arbitration is occurring or the phase-indicating signals (
+ * IO, CD, MSG) in the TARGET COMMAND register and the ASSERT DATA
+ * bit in the INITIATOR COMMAND register is set.
+ */
+
+#define OUTPUT_DATA_REG 0 /* wo DATA lines on SCSI bus */
+#define CURRENT_SCSI_DATA_REG 0 /* ro same */
+
+#define INITIATOR_COMMAND_REG 1 /* rw */
+#define ICR_ASSERT_RST 0x80 /* rw Set to assert RST */
+#define ICR_ARBITRATION_PROGRESS 0x40 /* ro Indicates arbitration complete */
+#define ICR_TRI_STATE 0x40 /* wo Set to tri-state drivers */
+#define ICR_ARBITRATION_LOST 0x20 /* ro Indicates arbitration lost */
+#define ICR_DIFF_ENABLE 0x20 /* wo Set to enable diff. drivers */
+#define ICR_ASSERT_ACK 0x10 /* rw ini Set to assert ACK */
+#define ICR_ASSERT_BSY 0x08 /* rw Set to assert BSY */
+#define ICR_ASSERT_SEL 0x04 /* rw Set to assert SEL */
+#define ICR_ASSERT_ATN 0x02 /* rw Set to assert ATN */
+#define ICR_ASSERT_DATA 0x01 /* rw SCSI_DATA_REG is asserted */
+
+#ifdef DIFFERENTIAL
+#define ICR_BASE ICR_DIFF_ENABLE
+#else
+#define ICR_BASE 0
+#endif
+
+#define MODE_REG 2
+/*
+ * Note : BLOCK_DMA code will keep DRQ asserted for the duration of the
+ * transfer, causing the chip to hog the bus. You probably don't want
+ * this.
+ */
+#define MR_BLOCK_DMA_MODE 0x80 /* rw block mode DMA */
+#define MR_TARGET 0x40 /* rw target mode */
+#define MR_ENABLE_PAR_CHECK 0x20 /* rw enable parity checking */
+#define MR_ENABLE_PAR_INTR 0x10 /* rw enable bad parity interrupt */
+#define MR_ENABLE_EOP_INTR 0x08 /* rw enable eop interrupt */
+#define MR_MONITOR_BSY 0x04 /* rw enable int on unexpected bsy fail */
+#define MR_DMA_MODE 0x02 /* rw DMA / pseudo DMA mode */
+#define MR_ARBITRATE 0x01 /* rw start arbitration */
+
+#ifdef PARITY
+#define MR_BASE MR_ENABLE_PAR_CHECK
+#else
+#define MR_BASE 0
+#endif
+
+#define TARGET_COMMAND_REG 3
+#define TCR_LAST_BYTE_SENT 0x80 /* ro DMA done */
+#define TCR_ASSERT_REQ 0x08 /* tgt rw assert REQ */
+#define TCR_ASSERT_MSG 0x04 /* tgt rw assert MSG */
+#define TCR_ASSERT_CD 0x02 /* tgt rw assert CD */
+#define TCR_ASSERT_IO 0x01 /* tgt rw assert IO */
+
+#define STATUS_REG 4 /* ro */
+/*
+ * Note : a set bit indicates an active signal, driven by us or another
+ * device.
+ */
+#define SR_RST 0x80
+#define SR_BSY 0x40
+#define SR_REQ 0x20
+#define SR_MSG 0x10
+#define SR_CD 0x08
+#define SR_IO 0x04
+#define SR_SEL 0x02
+#define SR_DBP 0x01
+
+/*
+ * Setting a bit in this register will cause an interrupt to be generated when
+ * BSY is false and SEL true and this bit is asserted on the bus.
+ */
+#define SELECT_ENABLE_REG 4 /* wo */
+
+#define BUS_AND_STATUS_REG 5 /* ro */
+#define BASR_END_DMA_TRANSFER 0x80 /* ro set on end of transfer */
+#define BASR_DRQ 0x40 /* ro mirror of DRQ pin */
+#define BASR_PARITY_ERROR 0x20 /* ro parity error detected */
+#define BASR_IRQ 0x10 /* ro mirror of IRQ pin */
+#define BASR_PHASE_MATCH 0x08 /* ro Set when MSG CD IO match TCR */
+#define BASR_BUSY_ERROR 0x04 /* ro Unexpected change to inactive state */
+#define BASR_ATN 0x02 /* ro BUS status */
+#define BASR_ACK 0x01 /* ro BUS status */
+
+/* Write any value to this register to start a DMA send */
+#define START_DMA_SEND_REG 5 /* wo */
+
+/*
+ * Used in DMA transfer mode, data is latched from the SCSI bus on
+ * the falling edge of REQ (ini) or ACK (tgt)
+ */
+#define INPUT_DATA_REG 6 /* ro */
+
+/* Write any value to this register to start a DMA receive */
+#define START_DMA_TARGET_RECEIVE_REG 6 /* wo */
+
+/* Read this register to clear interrupt conditions */
+#define RESET_PARITY_INTERRUPT_REG 7 /* ro */
+
+/* Write any value to this register to start an ini mode DMA receive */
+#define START_DMA_INITIATOR_RECEIVE_REG 7 /* wo */
+
+#define C400_CONTROL_STATUS_REG NCR53C400_register_offset-8 /* rw */
+
+#define CSR_RESET 0x80 /* wo Resets 53c400 */
+#define CSR_53C80_REG 0x80 /* ro 5380 registers busy */
+#define CSR_TRANS_DIR 0x40 /* rw Data transfer direction */
+#define CSR_SCSI_BUFF_INTR 0x20 /* rw Enable int on transfer ready */
+#define CSR_53C80_INTR 0x10 /* rw Enable 53c80 interrupts */
+#define CSR_SHARED_INTR 0x08 /* rw Interrupt sharing */
+#define CSR_HOST_BUF_NOT_RDY 0x04 /* ro Is Host buffer ready */
+#define CSR_SCSI_BUF_RDY 0x02 /* ro SCSI buffer read */
+#define CSR_GATED_53C80_IRQ 0x01 /* ro Last block xferred */
+
+#if 0
+#define CSR_BASE CSR_SCSI_BUFF_INTR | CSR_53C80_INTR
+#else
+#define CSR_BASE CSR_53C80_INTR
+#endif
+
+/* Number of 128-byte blocks to be transferred */
+#define C400_BLOCK_COUNTER_REG NCR53C400_register_offset-7 /* rw */
+
+/* Resume transfer after disconnect */
+#define C400_RESUME_TRANSFER_REG NCR53C400_register_offset-6 /* wo */
+
+/* Access to host buffer stack */
+#define C400_HOST_BUFFER NCR53C400_register_offset-4 /* rw */
+
+
+/* Note : PHASE_* macros are based on the values of the STATUS register */
+#define PHASE_MASK (SR_MSG | SR_CD | SR_IO)
+
+#define PHASE_DATAOUT 0
+#define PHASE_DATAIN SR_IO
+#define PHASE_CMDOUT SR_CD
+#define PHASE_STATIN (SR_CD | SR_IO)
+#define PHASE_MSGOUT (SR_MSG | SR_CD)
+#define PHASE_MSGIN (SR_MSG | SR_CD | SR_IO)
+#define PHASE_UNKNOWN 0xff
+
+/*
+ * Convert status register phase to something we can use to set phase in
+ * the target register so we can get phase mismatch interrupts on DMA
+ * transfers.
+ */
+
+#define PHASE_SR_TO_TCR(phase) ((phase) >> 2)
+
+/*
+ * The internal should_disconnect() function returns these based on the
+ * expected length of a disconnect if a device supports disconnect/
+ * reconnect.
+ */
+
+#define DISCONNECT_NONE 0
+#define DISCONNECT_TIME_TO_DATA 1
+#define DISCONNECT_LONG 2
+
+/*
+ * These are "special" values for the tag parameter passed to NCR5380_select.
+ */
+
+#define TAG_NEXT -1 /* Use next free tag */
+#define TAG_NONE -2 /*
+ * Establish I_T_L nexus instead of I_T_L_Q
+ * even on SCSI-II devices.
+ */
+
+/*
+ * These are "special" values for the irq and dma_channel fields of the
+ * Scsi_Host structure
+ */
+
+#define SCSI_IRQ_NONE 255
+#define DMA_NONE 255
+#define IRQ_AUTO 254
+#define DMA_AUTO 254
+#define PORT_AUTO 0xffff /* autoprobe io port for 53c400a */
+
+#define FLAG_HAS_LAST_BYTE_SENT 1 /* NCR53c81 or better */
+#define FLAG_CHECK_LAST_BYTE_SENT 2 /* Only test once */
+#define FLAG_NCR53C400 4 /* NCR53c400 */
+#define FLAG_NO_PSEUDO_DMA 8 /* Inhibit DMA */
+#define FLAG_DTC3181E 16 /* DTC3181E */
+
+#ifndef ASM
+struct NCR5380_hostdata {
+ NCR5380_implementation_fields; /* implementation specific */
+ struct Scsi_Host *host; /* Host backpointer */
+ unsigned char id_mask, id_higher_mask; /* 1 << id, all bits greater */
+ unsigned char targets_present; /* targets we have connected
+ to, so we can call a select
+ failure a retryable condition */
+ volatile unsigned char busy[8]; /* index = target, bit = lun */
+#if defined(REAL_DMA) || defined(REAL_DMA_POLL)
+ volatile int dma_len; /* requested length of DMA */
+#endif
+ volatile unsigned char last_message; /* last message OUT */
+ volatile Scsi_Cmnd *connected; /* currently connected command */
+ volatile Scsi_Cmnd *issue_queue; /* waiting to be issued */
+ volatile Scsi_Cmnd *disconnected_queue; /* waiting for reconnect */
+ volatile int restart_select; /* we have disconnected,
+ used to restart
+ NCR5380_select() */
+ volatile unsigned aborted:1; /* flag, says aborted */
+ int flags;
+ unsigned long time_expires; /* in jiffies, set prior to sleeping */
+ int select_time; /* timer in select for target response */
+ volatile Scsi_Cmnd *selecting;
+ struct work_struct coroutine; /* our co-routine */
+#ifdef NCR5380_STATS
+ unsigned timebase; /* Base for time calcs */
+ long time_read[8]; /* time to do reads */
+ long time_write[8]; /* time to do writes */
+ unsigned long bytes_read[8]; /* bytes read */
+ unsigned long bytes_write[8]; /* bytes written */
+ unsigned pendingr;
+ unsigned pendingw;
+#endif
+};
+
+#ifdef __KERNEL__
+
+#define dprintk(a,b) do {} while(0)
+#define NCR5380_dprint(a,b) do {} while(0)
+#define NCR5380_dprint_phase(a,b) do {} while(0)
+
+#if defined(AUTOPROBE_IRQ)
+static int NCR5380_probe_irq(struct Scsi_Host *instance, int possible);
+#endif
+static int NCR5380_init(struct Scsi_Host *instance, int flags);
+static void NCR5380_exit(struct Scsi_Host *instance);
+static void NCR5380_information_transfer(struct Scsi_Host *instance);
+#ifndef DONT_USE_INTR
+static irqreturn_t NCR5380_intr(int irq, void *dev_id, struct pt_regs *regs);
+#endif
+static void NCR5380_main(void *ptr);
+static void NCR5380_print_options(struct Scsi_Host *instance);
+#ifdef NDEBUG
+static void NCR5380_print_phase(struct Scsi_Host *instance);
+static void NCR5380_print(struct Scsi_Host *instance);
+#endif
+static int NCR5380_abort(Scsi_Cmnd * cmd);
+static int NCR5380_bus_reset(Scsi_Cmnd * cmd);
+static int NCR5380_host_reset(Scsi_Cmnd * cmd);
+static int NCR5380_device_reset(Scsi_Cmnd * cmd);
+static int NCR5380_queue_command(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *));
+static int NCR5380_proc_info(struct Scsi_Host *instance, char *buffer, char **start,
+off_t offset, int length, int inout);
+
+static void NCR5380_reselect(struct Scsi_Host *instance);
+static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd * cmd, int tag);
+#if defined(PSEUDO_DMA) || defined(REAL_DMA) || defined(REAL_DMA_POLL)
+static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
+#endif
+static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
+
+#if (defined(REAL_DMA) || defined(REAL_DMA_POLL))
+
+#if defined(i386) || defined(__alpha__)
+
+/**
+ * NCR5380_pc_dma_setup - setup ISA DMA
+ * @instance: adapter to set up
+ * @ptr: block to transfer (virtual address)
+ * @count: number of bytes to transfer
+ * @mode: DMA controller mode to use
+ *
+ * Program the DMA controller ready to perform an ISA DMA transfer
+ * on this chip.
+ *
+ * Locks: takes and releases the ISA DMA lock.
+ */
+
+static __inline__ int NCR5380_pc_dma_setup(struct Scsi_Host *instance, unsigned char *ptr, unsigned int count, unsigned char mode)
+{
+ unsigned limit;
+ unsigned long bus_addr = virt_to_bus(ptr);
+ unsigned long flags;
+
+ if (instance->dma_channel <= 3) {
+ if (count > 65536)
+ count = 65536;
+ limit = 65536 - (bus_addr & 0xFFFF);
+ } else {
+ if (count > 65536 * 2)
+ count = 65536 * 2;
+ limit = 65536 * 2 - (bus_addr & 0x1FFFF);
+ }
+
+ if (count > limit)
+ count = limit;
+
+ if ((count & 1) || (bus_addr & 1))
+ panic("scsi%d : attempted unaligned DMA transfer\n", instance->host_no);
+
+ flags=claim_dma_lock();
+ disable_dma(instance->dma_channel);
+ clear_dma_ff(instance->dma_channel);
+ set_dma_addr(instance->dma_channel, bus_addr);
+ set_dma_count(instance->dma_channel, count);
+ set_dma_mode(instance->dma_channel, mode);
+ enable_dma(instance->dma_channel);
+ release_dma_lock(flags);
+
+ return count;
+}
+
+/**
+ * NCR5380_pc_dma_write_setup - setup ISA DMA write
+ * @instance: adapter to set up
+ * @ptr: block to transfer (virtual address)
+ * @count: number of bytes to transfer
+ *
+ * Program the DMA controller ready to perform an ISA DMA write to the
+ * SCSI controller.
+ *
+ * Locks: called routines take and release the ISA DMA lock.
+ */
+
+static __inline__ int NCR5380_pc_dma_write_setup(struct Scsi_Host *instance, unsigned char *src, unsigned int count)
+{
+ return NCR5380_pc_dma_setup(instance, src, count, DMA_MODE_WRITE);
+}
+
+/**
+ * NCR5380_pc_dma_read_setup - setup ISA DMA read
+ * @instance: adapter to set up
+ * @ptr: block to transfer (virtual address)
+ * @count: number of bytes to transfer
+ *
+ * Program the DMA controller ready to perform an ISA DMA read from the
+ * SCSI controller.
+ *
+ * Locks: called routines take and release the ISA DMA lock.
+ */
+
+static __inline__ int NCR5380_pc_dma_read_setup(struct Scsi_Host *instance, unsigned char *src, unsigned int count)
+{
+ return NCR5380_pc_dma_setup(instance, src, count, DMA_MODE_READ);
+}
+
+/**
+ * NCR5380_pc_dma_residual - return bytes left
+ * @instance: adapter
+ *
+ * Reports the number of bytes left over after the DMA was terminated.
+ *
+ * Locks: takes and releases the ISA DMA lock.
+ */
+
+static __inline__ int NCR5380_pc_dma_residual(struct Scsi_Host *instance)
+{
+ unsigned long flags;
+ int tmp;
+
+ flags = claim_dma_lock();
+ clear_dma_ff(instance->dma_channel);
+ tmp = get_dma_residue(instance->dma_channel);
+ release_dma_lock(flags);
+
+ return tmp;
+}
+#endif /* defined(i386) || defined(__alpha__) */
+#endif /* defined(REAL_DMA) */
+#endif /* __KERNEL__ */
+#endif /* ndef ASM */
+#endif /* NCR5380_H */